]> git.ipfire.org Git - thirdparty/linux.git/blob - sound/usb/quirks.c
projects / thirdparty / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
io_uring: reset -EBUSY error when io sq thread is waken up
[thirdparty/linux.git] / sound / usb / quirks.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 */
4
5 #include <linux/init.h>
6 #include <linux/slab.h>
7 #include <linux/usb.h>
8 #include <linux/usb/audio.h>
9 #include <linux/usb/midi.h>
10 #include <linux/bits.h>
11
12 #include <sound/control.h>
13 #include <sound/core.h>
14 #include <sound/info.h>
15 #include <sound/pcm.h>
16
17 #include "usbaudio.h"
18 #include "card.h"
19 #include "mixer.h"
20 #include "mixer_quirks.h"
21 #include "midi.h"
22 #include "quirks.h"
23 #include "helper.h"
24 #include "endpoint.h"
25 #include "pcm.h"
26 #include "clock.h"
27 #include "stream.h"
28
29 /*
30 * handle the quirks for the contained interfaces
31 */
32 static int create_composite_quirk(struct snd_usb_audio *chip,
33 struct usb_interface *iface,
34 struct usb_driver *driver,
35 const struct snd_usb_audio_quirk *quirk_comp)
36 {
37 int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber;
38 const struct snd_usb_audio_quirk *quirk;
39 int err;
40
41 for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) {
42 iface = usb_ifnum_to_if(chip->dev, quirk->ifnum);
43 if (!iface)
44 continue;
45 if (quirk->ifnum != probed_ifnum &&
46 usb_interface_claimed(iface))
47 continue;
48 err = snd_usb_create_quirk(chip, iface, driver, quirk);
49 if (err < 0)
50 return err;
51 }
52
53 for (quirk = quirk_comp->data; quirk->ifnum >= 0; ++quirk) {
54 iface = usb_ifnum_to_if(chip->dev, quirk->ifnum);
55 if (!iface)
56 continue;
57 if (quirk->ifnum != probed_ifnum &&
58 !usb_interface_claimed(iface))
59 usb_driver_claim_interface(driver, iface, (void *)-1L);
60 }
61
62 return 0;
63 }
64
65 static int ignore_interface_quirk(struct snd_usb_audio *chip,
66 struct usb_interface *iface,
67 struct usb_driver *driver,
68 const struct snd_usb_audio_quirk *quirk)
69 {
70 return 0;
71 }
72
73
74 /*
75 * Allow alignment on audio sub-slot (channel samples) rather than
76 * on audio slots (audio frames)
77 */
78 static int create_align_transfer_quirk(struct snd_usb_audio *chip,
79 struct usb_interface *iface,
80 struct usb_driver *driver,
81 const struct snd_usb_audio_quirk *quirk)
82 {
83 chip->txfr_quirk = 1;
84 return 1; /* Continue with creating streams and mixer */
85 }
86
87 static int create_any_midi_quirk(struct snd_usb_audio *chip,
88 struct usb_interface *intf,
89 struct usb_driver *driver,
90 const struct snd_usb_audio_quirk *quirk)
91 {
92 return snd_usbmidi_create(chip->card, intf, &chip->midi_list, quirk);
93 }
94
95 /*
96 * create a stream for an interface with proper descriptors
97 */
98 static int create_standard_audio_quirk(struct snd_usb_audio *chip,
99 struct usb_interface *iface,
100 struct usb_driver *driver,
101 const struct snd_usb_audio_quirk *quirk)
102 {
103 struct usb_host_interface *alts;
104 struct usb_interface_descriptor *altsd;
105 int err;
106
107 if (chip->usb_id == USB_ID(0x1686, 0x00dd)) /* Zoom R16/24 */
108 chip->tx_length_quirk = 1;
109
110 alts = &iface->altsetting[0];
111 altsd = get_iface_desc(alts);
112 err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber);
113 if (err < 0) {
114 usb_audio_err(chip, "cannot setup if %d: error %d\n",
115 altsd->bInterfaceNumber, err);
116 return err;
117 }
118 /* reset the current interface */
119 usb_set_interface(chip->dev, altsd->bInterfaceNumber, 0);
120 return 0;
121 }
122
123 /*
124 * create a stream for an endpoint/altsetting without proper descriptors
125 */
126 static int create_fixed_stream_quirk(struct snd_usb_audio *chip,
127 struct usb_interface *iface,
128 struct usb_driver *driver,
129 const struct snd_usb_audio_quirk *quirk)
130 {
131 struct audioformat *fp;
132 struct usb_host_interface *alts;
133 struct usb_interface_descriptor *altsd;
134 int stream, err;
135 unsigned *rate_table = NULL;
136
137 fp = kmemdup(quirk->data, sizeof(*fp), GFP_KERNEL);
138 if (!fp)
139 return -ENOMEM;
140
141 INIT_LIST_HEAD(&fp->list);
142 if (fp->nr_rates > MAX_NR_RATES) {
143 kfree(fp);
144 return -EINVAL;
145 }
146 if (fp->nr_rates > 0) {
147 rate_table = kmemdup(fp->rate_table,
148 sizeof(int) * fp->nr_rates, GFP_KERNEL);
149 if (!rate_table) {
150 kfree(fp);
151 return -ENOMEM;
152 }
153 fp->rate_table = rate_table;
154 }
155
156 stream = (fp->endpoint & USB_DIR_IN)
157 ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
158 err = snd_usb_add_audio_stream(chip, stream, fp);
159 if (err < 0)
160 goto error;
161 if (fp->iface != get_iface_desc(&iface->altsetting[0])->bInterfaceNumber ||
162 fp->altset_idx >= iface->num_altsetting) {
163 err = -EINVAL;
164 goto error;
165 }
166 alts = &iface->altsetting[fp->altset_idx];
167 altsd = get_iface_desc(alts);
168 if (altsd->bNumEndpoints < 1) {
169 err = -EINVAL;
170 goto error;
171 }
172
173 fp->protocol = altsd->bInterfaceProtocol;
174
175 if (fp->datainterval == 0)
176 fp->datainterval = snd_usb_parse_datainterval(chip, alts);
177 if (fp->maxpacksize == 0)
178 fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
179 usb_set_interface(chip->dev, fp->iface, 0);
180 snd_usb_init_pitch(chip, fp->iface, alts, fp);
181 snd_usb_init_sample_rate(chip, fp->iface, alts, fp, fp->rate_max);
182 return 0;
183
184 error:
185 list_del(&fp->list); /* unlink for avoiding double-free */
186 kfree(fp);
187 kfree(rate_table);
188 return err;
189 }
190
191 static int create_auto_pcm_quirk(struct snd_usb_audio *chip,
192 struct usb_interface *iface,
193 struct usb_driver *driver)
194 {
195 struct usb_host_interface *alts;
196 struct usb_interface_descriptor *altsd;
197 struct usb_endpoint_descriptor *epd;
198 struct uac1_as_header_descriptor *ashd;
199 struct uac_format_type_i_discrete_descriptor *fmtd;
200
201 /*
202 * Most Roland/Yamaha audio streaming interfaces have more or less
203 * standard descriptors, but older devices might lack descriptors, and
204 * future ones might change, so ensure that we fail silently if the
205 * interface doesn't look exactly right.
206 */
207
208 /* must have a non-zero altsetting for streaming */
209 if (iface->num_altsetting < 2)
210 return -ENODEV;
211 alts = &iface->altsetting[1];
212 altsd = get_iface_desc(alts);
213
214 /* must have an isochronous endpoint for streaming */
215 if (altsd->bNumEndpoints < 1)
216 return -ENODEV;
217 epd = get_endpoint(alts, 0);
218 if (!usb_endpoint_xfer_isoc(epd))
219 return -ENODEV;
220
221 /* must have format descriptors */
222 ashd = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL,
223 UAC_AS_GENERAL);
224 fmtd = snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL,
225 UAC_FORMAT_TYPE);
226 if (!ashd || ashd->bLength < 7 ||
227 !fmtd || fmtd->bLength < 8)
228 return -ENODEV;
229
230 return create_standard_audio_quirk(chip, iface, driver, NULL);
231 }
232
233 static int create_yamaha_midi_quirk(struct snd_usb_audio *chip,
234 struct usb_interface *iface,
235 struct usb_driver *driver,
236 struct usb_host_interface *alts)
237 {
238 static const struct snd_usb_audio_quirk yamaha_midi_quirk = {
239 .type = QUIRK_MIDI_YAMAHA
240 };
241 struct usb_midi_in_jack_descriptor *injd;
242 struct usb_midi_out_jack_descriptor *outjd;
243
244 /* must have some valid jack descriptors */
245 injd = snd_usb_find_csint_desc(alts->extra, alts->extralen,
246 NULL, USB_MS_MIDI_IN_JACK);
247 outjd = snd_usb_find_csint_desc(alts->extra, alts->extralen,
248 NULL, USB_MS_MIDI_OUT_JACK);
249 if (!injd && !outjd)
250 return -ENODEV;
251 if ((injd && !snd_usb_validate_midi_desc(injd)) ||
252 (outjd && !snd_usb_validate_midi_desc(outjd)))
253 return -ENODEV;
254 if (injd && (injd->bLength < 5 ||
255 (injd->bJackType != USB_MS_EMBEDDED &&
256 injd->bJackType != USB_MS_EXTERNAL)))
257 return -ENODEV;
258 if (outjd && (outjd->bLength < 6 ||
259 (outjd->bJackType != USB_MS_EMBEDDED &&
260 outjd->bJackType != USB_MS_EXTERNAL)))
261 return -ENODEV;
262 return create_any_midi_quirk(chip, iface, driver, &yamaha_midi_quirk);
263 }
264
265 static int create_roland_midi_quirk(struct snd_usb_audio *chip,
266 struct usb_interface *iface,
267 struct usb_driver *driver,
268 struct usb_host_interface *alts)
269 {
270 static const struct snd_usb_audio_quirk roland_midi_quirk = {
271 .type = QUIRK_MIDI_ROLAND
272 };
273 u8 *roland_desc = NULL;
274
275 /* might have a vendor-specific descriptor <06 24 F1 02 ...> */
276 for (;;) {
277 roland_desc = snd_usb_find_csint_desc(alts->extra,
278 alts->extralen,
279 roland_desc, 0xf1);
280 if (!roland_desc)
281 return -ENODEV;
282 if (roland_desc[0] < 6 || roland_desc[3] != 2)
283 continue;
284 return create_any_midi_quirk(chip, iface, driver,
285 &roland_midi_quirk);
286 }
287 }
288
289 static int create_std_midi_quirk(struct snd_usb_audio *chip,
290 struct usb_interface *iface,
291 struct usb_driver *driver,
292 struct usb_host_interface *alts)
293 {
294 struct usb_ms_header_descriptor *mshd;
295 struct usb_ms_endpoint_descriptor *msepd;
296
297 /* must have the MIDIStreaming interface header descriptor*/
298 mshd = (struct usb_ms_header_descriptor *)alts->extra;
299 if (alts->extralen < 7 ||
300 mshd->bLength < 7 ||
301 mshd->bDescriptorType != USB_DT_CS_INTERFACE ||
302 mshd->bDescriptorSubtype != USB_MS_HEADER)
303 return -ENODEV;
304 /* must have the MIDIStreaming endpoint descriptor*/
305 msepd = (struct usb_ms_endpoint_descriptor *)alts->endpoint[0].extra;
306 if (alts->endpoint[0].extralen < 4 ||
307 msepd->bLength < 4 ||
308 msepd->bDescriptorType != USB_DT_CS_ENDPOINT ||
309 msepd->bDescriptorSubtype != UAC_MS_GENERAL ||
310 msepd->bNumEmbMIDIJack < 1 ||
311 msepd->bNumEmbMIDIJack > 16)
312 return -ENODEV;
313
314 return create_any_midi_quirk(chip, iface, driver, NULL);
315 }
316
317 static int create_auto_midi_quirk(struct snd_usb_audio *chip,
318 struct usb_interface *iface,
319 struct usb_driver *driver)
320 {
321 struct usb_host_interface *alts;
322 struct usb_interface_descriptor *altsd;
323 struct usb_endpoint_descriptor *epd;
324 int err;
325
326 alts = &iface->altsetting[0];
327 altsd = get_iface_desc(alts);
328
329 /* must have at least one bulk/interrupt endpoint for streaming */
330 if (altsd->bNumEndpoints < 1)
331 return -ENODEV;
332 epd = get_endpoint(alts, 0);
333 if (!usb_endpoint_xfer_bulk(epd) &&
334 !usb_endpoint_xfer_int(epd))
335 return -ENODEV;
336
337 switch (USB_ID_VENDOR(chip->usb_id)) {
338 case 0x0499: /* Yamaha */
339 err = create_yamaha_midi_quirk(chip, iface, driver, alts);
340 if (err != -ENODEV)
341 return err;
342 break;
343 case 0x0582: /* Roland */
344 err = create_roland_midi_quirk(chip, iface, driver, alts);
345 if (err != -ENODEV)
346 return err;
347 break;
348 }
349
350 return create_std_midi_quirk(chip, iface, driver, alts);
351 }
352
353 static int create_autodetect_quirk(struct snd_usb_audio *chip,
354 struct usb_interface *iface,
355 struct usb_driver *driver)
356 {
357 int err;
358
359 err = create_auto_pcm_quirk(chip, iface, driver);
360 if (err == -ENODEV)
361 err = create_auto_midi_quirk(chip, iface, driver);
362 return err;
363 }
364
365 static int create_autodetect_quirks(struct snd_usb_audio *chip,
366 struct usb_interface *iface,
367 struct usb_driver *driver,
368 const struct snd_usb_audio_quirk *quirk)
369 {
370 int probed_ifnum = get_iface_desc(iface->altsetting)->bInterfaceNumber;
371 int ifcount, ifnum, err;
372
373 err = create_autodetect_quirk(chip, iface, driver);
374 if (err < 0)
375 return err;
376
377 /*
378 * ALSA PCM playback/capture devices cannot be registered in two steps,
379 * so we have to claim the other corresponding interface here.
380 */
381 ifcount = chip->dev->actconfig->desc.bNumInterfaces;
382 for (ifnum = 0; ifnum < ifcount; ifnum++) {
383 if (ifnum == probed_ifnum || quirk->ifnum >= 0)
384 continue;
385 iface = usb_ifnum_to_if(chip->dev, ifnum);
386 if (!iface ||
387 usb_interface_claimed(iface) ||
388 get_iface_desc(iface->altsetting)->bInterfaceClass !=
389 USB_CLASS_VENDOR_SPEC)
390 continue;
391
392 err = create_autodetect_quirk(chip, iface, driver);
393 if (err >= 0)
394 usb_driver_claim_interface(driver, iface, (void *)-1L);
395 }
396
397 return 0;
398 }
399
400 /*
401 * Create a stream for an Edirol UA-700/UA-25/UA-4FX interface.
402 * The only way to detect the sample rate is by looking at wMaxPacketSize.
403 */
404 static int create_uaxx_quirk(struct snd_usb_audio *chip,
405 struct usb_interface *iface,
406 struct usb_driver *driver,
407 const struct snd_usb_audio_quirk *quirk)
408 {
409 static const struct audioformat ua_format = {
410 .formats = SNDRV_PCM_FMTBIT_S24_3LE,
411 .channels = 2,
412 .fmt_type = UAC_FORMAT_TYPE_I,
413 .altsetting = 1,
414 .altset_idx = 1,
415 .rates = SNDRV_PCM_RATE_CONTINUOUS,
416 };
417 struct usb_host_interface *alts;
418 struct usb_interface_descriptor *altsd;
419 struct audioformat *fp;
420 int stream, err;
421
422 /* both PCM and MIDI interfaces have 2 or more altsettings */
423 if (iface->num_altsetting < 2)
424 return -ENXIO;
425 alts = &iface->altsetting[1];
426 altsd = get_iface_desc(alts);
427
428 if (altsd->bNumEndpoints == 2) {
429 static const struct snd_usb_midi_endpoint_info ua700_ep = {
430 .out_cables = 0x0003,
431 .in_cables = 0x0003
432 };
433 static const struct snd_usb_audio_quirk ua700_quirk = {
434 .type = QUIRK_MIDI_FIXED_ENDPOINT,
435 .data = &ua700_ep
436 };
437 static const struct snd_usb_midi_endpoint_info uaxx_ep = {
438 .out_cables = 0x0001,
439 .in_cables = 0x0001
440 };
441 static const struct snd_usb_audio_quirk uaxx_quirk = {
442 .type = QUIRK_MIDI_FIXED_ENDPOINT,
443 .data = &uaxx_ep
444 };
445 const struct snd_usb_audio_quirk *quirk =
446 chip->usb_id == USB_ID(0x0582, 0x002b)
447 ? &ua700_quirk : &uaxx_quirk;
448 return __snd_usbmidi_create(chip->card, iface,
449 &chip->midi_list, quirk,
450 chip->usb_id);
451 }
452
453 if (altsd->bNumEndpoints != 1)
454 return -ENXIO;
455
456 fp = kmemdup(&ua_format, sizeof(*fp), GFP_KERNEL);
457 if (!fp)
458 return -ENOMEM;
459
460 fp->iface = altsd->bInterfaceNumber;
461 fp->endpoint = get_endpoint(alts, 0)->bEndpointAddress;
462 fp->ep_attr = get_endpoint(alts, 0)->bmAttributes;
463 fp->datainterval = 0;
464 fp->maxpacksize = le16_to_cpu(get_endpoint(alts, 0)->wMaxPacketSize);
465 INIT_LIST_HEAD(&fp->list);
466
467 switch (fp->maxpacksize) {
468 case 0x120:
469 fp->rate_max = fp->rate_min = 44100;
470 break;
471 case 0x138:
472 case 0x140:
473 fp->rate_max = fp->rate_min = 48000;
474 break;
475 case 0x258:
476 case 0x260:
477 fp->rate_max = fp->rate_min = 96000;
478 break;
479 default:
480 usb_audio_err(chip, "unknown sample rate\n");
481 kfree(fp);
482 return -ENXIO;
483 }
484
485 stream = (fp->endpoint & USB_DIR_IN)
486 ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
487 err = snd_usb_add_audio_stream(chip, stream, fp);
488 if (err < 0) {
489 list_del(&fp->list); /* unlink for avoiding double-free */
490 kfree(fp);
491 return err;
492 }
493 usb_set_interface(chip->dev, fp->iface, 0);
494 return 0;
495 }
496
497 /*
498 * Create a standard mixer for the specified interface.
499 */
500 static int create_standard_mixer_quirk(struct snd_usb_audio *chip,
501 struct usb_interface *iface,
502 struct usb_driver *driver,
503 const struct snd_usb_audio_quirk *quirk)
504 {
505 if (quirk->ifnum < 0)
506 return 0;
507
508 return snd_usb_create_mixer(chip, quirk->ifnum, 0);
509 }
510
511
512 static int setup_fmt_after_resume_quirk(struct snd_usb_audio *chip,
513 struct usb_interface *iface,
514 struct usb_driver *driver,
515 const struct snd_usb_audio_quirk *quirk)
516 {
517 chip->setup_fmt_after_resume_quirk = 1;
518 return 1; /* Continue with creating streams and mixer */
519 }
520
521 /*
522 * audio-interface quirks
523 *
524 * returns zero if no standard audio/MIDI parsing is needed.
525 * returns a positive value if standard audio/midi interfaces are parsed
526 * after this.
527 * returns a negative value at error.
528 */
529 int snd_usb_create_quirk(struct snd_usb_audio *chip,
530 struct usb_interface *iface,
531 struct usb_driver *driver,
532 const struct snd_usb_audio_quirk *quirk)
533 {
534 typedef int (*quirk_func_t)(struct snd_usb_audio *,
535 struct usb_interface *,
536 struct usb_driver *,
537 const struct snd_usb_audio_quirk *);
538 static const quirk_func_t quirk_funcs[] = {
539 [QUIRK_IGNORE_INTERFACE] = ignore_interface_quirk,
540 [QUIRK_COMPOSITE] = create_composite_quirk,
541 [QUIRK_AUTODETECT] = create_autodetect_quirks,
542 [QUIRK_MIDI_STANDARD_INTERFACE] = create_any_midi_quirk,
543 [QUIRK_MIDI_FIXED_ENDPOINT] = create_any_midi_quirk,
544 [QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,
545 [QUIRK_MIDI_ROLAND] = create_any_midi_quirk,
546 [QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,
547 [QUIRK_MIDI_NOVATION] = create_any_midi_quirk,
548 [QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk,
549 [QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
550 [QUIRK_MIDI_CME] = create_any_midi_quirk,
551 [QUIRK_MIDI_AKAI] = create_any_midi_quirk,
552 [QUIRK_MIDI_FTDI] = create_any_midi_quirk,
553 [QUIRK_MIDI_CH345] = create_any_midi_quirk,
554 [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
555 [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk,
556 [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk,
557 [QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk,
558 [QUIRK_AUDIO_STANDARD_MIXER] = create_standard_mixer_quirk,
559 [QUIRK_SETUP_FMT_AFTER_RESUME] = setup_fmt_after_resume_quirk,
560 };
561
562 if (quirk->type < QUIRK_TYPE_COUNT) {
563 return quirk_funcs[quirk->type](chip, iface, driver, quirk);
564 } else {
565 usb_audio_err(chip, "invalid quirk type %d\n", quirk->type);
566 return -ENXIO;
567 }
568 }
569
570 /*
571 * boot quirks
572 */
573
574 #define EXTIGY_FIRMWARE_SIZE_OLD 794
575 #define EXTIGY_FIRMWARE_SIZE_NEW 483
576
577 static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interface *intf)
578 {
579 struct usb_host_config *config = dev->actconfig;
580 int err;
581
582 if (le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_OLD ||
583 le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) {
584 dev_dbg(&dev->dev, "sending Extigy boot sequence...\n");
585 /* Send message to force it to reconnect with full interface. */
586 err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0),
587 0x10, 0x43, 0x0001, 0x000a, NULL, 0);
588 if (err < 0)
589 dev_dbg(&dev->dev, "error sending boot message: %d\n", err);
590 err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
591 &dev->descriptor, sizeof(dev->descriptor));
592 config = dev->actconfig;
593 if (err < 0)
594 dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
595 err = usb_reset_configuration(dev);
596 if (err < 0)
597 dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
598 dev_dbg(&dev->dev, "extigy_boot: new boot length = %d\n",
599 le16_to_cpu(get_cfg_desc(config)->wTotalLength));
600 return -ENODEV; /* quit this anyway */
601 }
602 return 0;
603 }
604
605 static int snd_usb_audigy2nx_boot_quirk(struct usb_device *dev)
606 {
607 u8 buf = 1;
608
609 snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), 0x2a,
610 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER,
611 0, 0, &buf, 1);
612 if (buf == 0) {
613 snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0x29,
614 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
615 1, 2000, NULL, 0);
616 return -ENODEV;
617 }
618 return 0;
619 }
620
621 static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev)
622 {
623 int err;
624
625 if (dev->actconfig->desc.bConfigurationValue == 1) {
626 dev_info(&dev->dev,
627 "Fast Track Pro switching to config #2\n");
628 /* This function has to be available by the usb core module.
629 * if it is not avialable the boot quirk has to be left out
630 * and the configuration has to be set by udev or hotplug
631 * rules
632 */
633 err = usb_driver_set_configuration(dev, 2);
634 if (err < 0)
635 dev_dbg(&dev->dev,
636 "error usb_driver_set_configuration: %d\n",
637 err);
638 /* Always return an error, so that we stop creating a device
639 that will just be destroyed and recreated with a new
640 configuration */
641 return -ENODEV;
642 } else
643 dev_info(&dev->dev, "Fast Track Pro config OK\n");
644
645 return 0;
646 }
647
648 /*
649 * C-Media CM106/CM106+ have four 16-bit internal registers that are nicely
650 * documented in the device's data sheet.
651 */
652 static int snd_usb_cm106_write_int_reg(struct usb_device *dev, int reg, u16 value)
653 {
654 u8 buf[4];
655 buf[0] = 0x20;
656 buf[1] = value & 0xff;
657 buf[2] = (value >> 8) & 0xff;
658 buf[3] = reg;
659 return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION,
660 USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
661 0, 0, &buf, 4);
662 }
663
664 static int snd_usb_cm106_boot_quirk(struct usb_device *dev)
665 {
666 /*
667 * Enable line-out driver mode, set headphone source to front
668 * channels, enable stereo mic.
669 */
670 return snd_usb_cm106_write_int_reg(dev, 2, 0x8004);
671 }
672
673 /*
674 * CM6206 registers from the CM6206 datasheet rev 2.1
675 */
676 #define CM6206_REG0_DMA_MASTER BIT(15)
677 #define CM6206_REG0_SPDIFO_RATE_48K (2 << 12)
678 #define CM6206_REG0_SPDIFO_RATE_96K (7 << 12)
679 /* Bit 4 thru 11 is the S/PDIF category code */
680 #define CM6206_REG0_SPDIFO_CAT_CODE_GENERAL (0 << 4)
681 #define CM6206_REG0_SPDIFO_EMPHASIS_CD BIT(3)
682 #define CM6206_REG0_SPDIFO_COPYRIGHT_NA BIT(2)
683 #define CM6206_REG0_SPDIFO_NON_AUDIO BIT(1)
684 #define CM6206_REG0_SPDIFO_PRO_FORMAT BIT(0)
685
686 #define CM6206_REG1_TEST_SEL_CLK BIT(14)
687 #define CM6206_REG1_PLLBIN_EN BIT(13)
688 #define CM6206_REG1_SOFT_MUTE_EN BIT(12)
689 #define CM6206_REG1_GPIO4_OUT BIT(11)
690 #define CM6206_REG1_GPIO4_OE BIT(10)
691 #define CM6206_REG1_GPIO3_OUT BIT(9)
692 #define CM6206_REG1_GPIO3_OE BIT(8)
693 #define CM6206_REG1_GPIO2_OUT BIT(7)
694 #define CM6206_REG1_GPIO2_OE BIT(6)
695 #define CM6206_REG1_GPIO1_OUT BIT(5)
696 #define CM6206_REG1_GPIO1_OE BIT(4)
697 #define CM6206_REG1_SPDIFO_INVALID BIT(3)
698 #define CM6206_REG1_SPDIF_LOOP_EN BIT(2)
699 #define CM6206_REG1_SPDIFO_DIS BIT(1)
700 #define CM6206_REG1_SPDIFI_MIX BIT(0)
701
702 #define CM6206_REG2_DRIVER_ON BIT(15)
703 #define CM6206_REG2_HEADP_SEL_SIDE_CHANNELS (0 << 13)
704 #define CM6206_REG2_HEADP_SEL_SURROUND_CHANNELS (1 << 13)
705 #define CM6206_REG2_HEADP_SEL_CENTER_SUBW (2 << 13)
706 #define CM6206_REG2_HEADP_SEL_FRONT_CHANNELS (3 << 13)
707 #define CM6206_REG2_MUTE_HEADPHONE_RIGHT BIT(12)
708 #define CM6206_REG2_MUTE_HEADPHONE_LEFT BIT(11)
709 #define CM6206_REG2_MUTE_REAR_SURROUND_RIGHT BIT(10)
710 #define CM6206_REG2_MUTE_REAR_SURROUND_LEFT BIT(9)
711 #define CM6206_REG2_MUTE_SIDE_SURROUND_RIGHT BIT(8)
712 #define CM6206_REG2_MUTE_SIDE_SURROUND_LEFT BIT(7)
713 #define CM6206_REG2_MUTE_SUBWOOFER BIT(6)
714 #define CM6206_REG2_MUTE_CENTER BIT(5)
715 #define CM6206_REG2_MUTE_RIGHT_FRONT BIT(3)
716 #define CM6206_REG2_MUTE_LEFT_FRONT BIT(3)
717 #define CM6206_REG2_EN_BTL BIT(2)
718 #define CM6206_REG2_MCUCLKSEL_1_5_MHZ (0)
719 #define CM6206_REG2_MCUCLKSEL_3_MHZ (1)
720 #define CM6206_REG2_MCUCLKSEL_6_MHZ (2)
721 #define CM6206_REG2_MCUCLKSEL_12_MHZ (3)
722
723 /* Bit 11..13 sets the sensitivity to FLY tuner volume control VP/VD signal */
724 #define CM6206_REG3_FLYSPEED_DEFAULT (2 << 11)
725 #define CM6206_REG3_VRAP25EN BIT(10)
726 #define CM6206_REG3_MSEL1 BIT(9)
727 #define CM6206_REG3_SPDIFI_RATE_44_1K BIT(0 << 7)
728 #define CM6206_REG3_SPDIFI_RATE_48K BIT(2 << 7)
729 #define CM6206_REG3_SPDIFI_RATE_32K BIT(3 << 7)
730 #define CM6206_REG3_PINSEL BIT(6)
731 #define CM6206_REG3_FOE BIT(5)
732 #define CM6206_REG3_ROE BIT(4)
733 #define CM6206_REG3_CBOE BIT(3)
734 #define CM6206_REG3_LOSE BIT(2)
735 #define CM6206_REG3_HPOE BIT(1)
736 #define CM6206_REG3_SPDIFI_CANREC BIT(0)
737
738 #define CM6206_REG5_DA_RSTN BIT(13)
739 #define CM6206_REG5_AD_RSTN BIT(12)
740 #define CM6206_REG5_SPDIFO_AD2SPDO BIT(12)
741 #define CM6206_REG5_SPDIFO_SEL_FRONT (0 << 9)
742 #define CM6206_REG5_SPDIFO_SEL_SIDE_SUR (1 << 9)
743 #define CM6206_REG5_SPDIFO_SEL_CEN_LFE (2 << 9)
744 #define CM6206_REG5_SPDIFO_SEL_REAR_SUR (3 << 9)
745 #define CM6206_REG5_CODECM BIT(8)
746 #define CM6206_REG5_EN_HPF BIT(7)
747 #define CM6206_REG5_T_SEL_DSDA4 BIT(6)
748 #define CM6206_REG5_T_SEL_DSDA3 BIT(5)
749 #define CM6206_REG5_T_SEL_DSDA2 BIT(4)
750 #define CM6206_REG5_T_SEL_DSDA1 BIT(3)
751 #define CM6206_REG5_T_SEL_DSDAD_NORMAL 0
752 #define CM6206_REG5_T_SEL_DSDAD_FRONT 4
753 #define CM6206_REG5_T_SEL_DSDAD_S_SURROUND 5
754 #define CM6206_REG5_T_SEL_DSDAD_CEN_LFE 6
755 #define CM6206_REG5_T_SEL_DSDAD_R_SURROUND 7
756
757 static int snd_usb_cm6206_boot_quirk(struct usb_device *dev)
758 {
759 int err = 0, reg;
760 int val[] = {
761 /*
762 * Values here are chosen based on sniffing USB traffic
763 * under Windows.
764 *
765 * REG0: DAC is master, sample rate 48kHz, no copyright
766 */
767 CM6206_REG0_SPDIFO_RATE_48K |
768 CM6206_REG0_SPDIFO_COPYRIGHT_NA,
769 /*
770 * REG1: PLL binary search enable, soft mute enable.
771 */
772 CM6206_REG1_PLLBIN_EN |
773 CM6206_REG1_SOFT_MUTE_EN,
774 /*
775 * REG2: enable output drivers,
776 * select front channels to the headphone output,
777 * then mute the headphone channels, run the MCU
778 * at 1.5 MHz.
779 */
780 CM6206_REG2_DRIVER_ON |
781 CM6206_REG2_HEADP_SEL_FRONT_CHANNELS |
782 CM6206_REG2_MUTE_HEADPHONE_RIGHT |
783 CM6206_REG2_MUTE_HEADPHONE_LEFT,
784 /*
785 * REG3: default flyspeed, set 2.5V mic bias
786 * enable all line out ports and enable SPDIF
787 */
788 CM6206_REG3_FLYSPEED_DEFAULT |
789 CM6206_REG3_VRAP25EN |
790 CM6206_REG3_FOE |
791 CM6206_REG3_ROE |
792 CM6206_REG3_CBOE |
793 CM6206_REG3_LOSE |
794 CM6206_REG3_HPOE |
795 CM6206_REG3_SPDIFI_CANREC,
796 /* REG4 is just a bunch of GPIO lines */
797 0x0000,
798 /* REG5: de-assert AD/DA reset signals */
799 CM6206_REG5_DA_RSTN |
800 CM6206_REG5_AD_RSTN };
801
802 for (reg = 0; reg < ARRAY_SIZE(val); reg++) {
803 err = snd_usb_cm106_write_int_reg(dev, reg, val[reg]);
804 if (err < 0)
805 return err;
806 }
807
808 return err;
809 }
810
811 /* quirk for Plantronics GameCom 780 with CM6302 chip */
812 static int snd_usb_gamecon780_boot_quirk(struct usb_device *dev)
813 {
814 /* set the initial volume and don't change; other values are either
815 * too loud or silent due to firmware bug (bko#65251)
816 */
817 u8 buf[2] = { 0x74, 0xe3 };
818 return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR,
819 USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
820 UAC_FU_VOLUME << 8, 9 << 8, buf, 2);
821 }
822
823 /*
824 * Novation Twitch DJ controller
825 * Focusrite Novation Saffire 6 USB audio card
826 */
827 static int snd_usb_novation_boot_quirk(struct usb_device *dev)
828 {
829 /* preemptively set up the device because otherwise the
830 * raw MIDI endpoints are not active */
831 usb_set_interface(dev, 0, 1);
832 return 0;
833 }
834
835 /*
836 * This call will put the synth in "USB send" mode, i.e it will send MIDI
837 * messages through USB (this is disabled at startup). The synth will
838 * acknowledge by sending a sysex on endpoint 0x85 and by displaying a USB
839 * sign on its LCD. Values here are chosen based on sniffing USB traffic
840 * under Windows.
841 */
842 static int snd_usb_accessmusic_boot_quirk(struct usb_device *dev)
843 {
844 int err, actual_length;
845 /* "midi send" enable */
846 static const u8 seq[] = { 0x4e, 0x73, 0x52, 0x01 };
847 void *buf;
848
849 if (snd_usb_pipe_sanity_check(dev, usb_sndintpipe(dev, 0x05)))
850 return -EINVAL;
851 buf = kmemdup(seq, ARRAY_SIZE(seq), GFP_KERNEL);
852 if (!buf)
853 return -ENOMEM;
854 err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x05), buf,
855 ARRAY_SIZE(seq), &actual_length, 1000);
856 kfree(buf);
857 if (err < 0)
858 return err;
859
860 return 0;
861 }
862
863 /*
864 * Some sound cards from Native Instruments are in fact compliant to the USB
865 * audio standard of version 2 and other approved USB standards, even though
866 * they come up as vendor-specific device when first connected.
867 *
868 * However, they can be told to come up with a new set of descriptors
869 * upon their next enumeration, and the interfaces announced by the new
870 * descriptors will then be handled by the kernel's class drivers. As the
871 * product ID will also change, no further checks are required.
872 */
873
874 static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev)
875 {
876 int ret;
877
878 if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0)))
879 return -EINVAL;
880 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
881 0xaf, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
882 1, 0, NULL, 0, 1000);
883
884 if (ret < 0)
885 return ret;
886
887 usb_reset_device(dev);
888
889 /* return -EAGAIN, so the creation of an audio interface for this
890 * temporary device is aborted. The device will reconnect with a
891 * new product ID */
892 return -EAGAIN;
893 }
894
895 static void mbox2_setup_48_24_magic(struct usb_device *dev)
896 {
897 u8 srate[3];
898 u8 temp[12];
899
900 /* Choose 48000Hz permanently */
901 srate[0] = 0x80;
902 srate[1] = 0xbb;
903 srate[2] = 0x00;
904
905 /* Send the magic! */
906 snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
907 0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003);
908 snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
909 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003);
910 snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
911 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003);
912 snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
913 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003);
914 return;
915 }
916
917 /* Digidesign Mbox 2 needs to load firmware onboard
918 * and driver must wait a few seconds for initialisation.
919 */
920
921 #define MBOX2_FIRMWARE_SIZE 646
922 #define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */
923 #define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */
924
925 static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
926 {
927 struct usb_host_config *config = dev->actconfig;
928 int err;
929 u8 bootresponse[0x12];
930 int fwsize;
931 int count;
932
933 fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
934
935 if (fwsize != MBOX2_FIRMWARE_SIZE) {
936 dev_err(&dev->dev, "Invalid firmware size=%d.\n", fwsize);
937 return -ENODEV;
938 }
939
940 dev_dbg(&dev->dev, "Sending Digidesign Mbox 2 boot sequence...\n");
941
942 count = 0;
943 bootresponse[0] = MBOX2_BOOT_LOADING;
944 while ((bootresponse[0] == MBOX2_BOOT_LOADING) && (count < 10)) {
945 msleep(500); /* 0.5 second delay */
946 snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
947 /* Control magic - load onboard firmware */
948 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012);
949 if (bootresponse[0] == MBOX2_BOOT_READY)
950 break;
951 dev_dbg(&dev->dev, "device not ready, resending boot sequence...\n");
952 count++;
953 }
954
955 if (bootresponse[0] != MBOX2_BOOT_READY) {
956 dev_err(&dev->dev, "Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]);
957 return -ENODEV;
958 }
959
960 dev_dbg(&dev->dev, "device initialised!\n");
961
962 err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
963 &dev->descriptor, sizeof(dev->descriptor));
964 config = dev->actconfig;
965 if (err < 0)
966 dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
967
968 err = usb_reset_configuration(dev);
969 if (err < 0)
970 dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
971 dev_dbg(&dev->dev, "mbox2_boot: new boot length = %d\n",
972 le16_to_cpu(get_cfg_desc(config)->wTotalLength));
973
974 mbox2_setup_48_24_magic(dev);
975
976 dev_info(&dev->dev, "Digidesign Mbox 2: 24bit 48kHz");
977
978 return 0; /* Successful boot */
979 }
980
981 static int snd_usb_axefx3_boot_quirk(struct usb_device *dev)
982 {
983 int err;
984
985 dev_dbg(&dev->dev, "Waiting for Axe-Fx III to boot up...\n");
986
987 if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0)))
988 return -EINVAL;
989 /* If the Axe-Fx III has not fully booted, it will timeout when trying
990 * to enable the audio streaming interface. A more generous timeout is
991 * used here to detect when the Axe-Fx III has finished booting as the
992 * set interface message will be acked once it has
993 */
994 err = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
995 USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE,
996 1, 1, NULL, 0, 120000);
997 if (err < 0) {
998 dev_err(&dev->dev,
999 "failed waiting for Axe-Fx III to boot: %d\n", err);
1000 return err;
1001 }
1002
1003 dev_dbg(&dev->dev, "Axe-Fx III is now ready\n");
1004
1005 err = usb_set_interface(dev, 1, 0);
1006 if (err < 0)
1007 dev_dbg(&dev->dev,
1008 "error stopping Axe-Fx III interface: %d\n", err);
1009
1010 return 0;
1011 }
1012
1013
1014 #define MICROBOOK_BUF_SIZE 128
1015
1016 static int snd_usb_motu_microbookii_communicate(struct usb_device *dev, u8 *buf,
1017 int buf_size, int *length)
1018 {
1019 int err, actual_length;
1020
1021 if (snd_usb_pipe_sanity_check(dev, usb_sndintpipe(dev, 0x01)))
1022 return -EINVAL;
1023 err = usb_interrupt_msg(dev, usb_sndintpipe(dev, 0x01), buf, *length,
1024 &actual_length, 1000);
1025 if (err < 0)
1026 return err;
1027
1028 print_hex_dump(KERN_DEBUG, "MicroBookII snd: ", DUMP_PREFIX_NONE, 16, 1,
1029 buf, actual_length, false);
1030
1031 memset(buf, 0, buf_size);
1032
1033 if (snd_usb_pipe_sanity_check(dev, usb_rcvintpipe(dev, 0x82)))
1034 return -EINVAL;
1035 err = usb_interrupt_msg(dev, usb_rcvintpipe(dev, 0x82), buf, buf_size,
1036 &actual_length, 1000);
1037 if (err < 0)
1038 return err;
1039
1040 print_hex_dump(KERN_DEBUG, "MicroBookII rcv: ", DUMP_PREFIX_NONE, 16, 1,
1041 buf, actual_length, false);
1042
1043 *length = actual_length;
1044 return 0;
1045 }
1046
1047 static int snd_usb_motu_microbookii_boot_quirk(struct usb_device *dev)
1048 {
1049 int err, actual_length, poll_attempts = 0;
1050 static const u8 set_samplerate_seq[] = { 0x00, 0x00, 0x00, 0x00,
1051 0x00, 0x00, 0x0b, 0x14,
1052 0x00, 0x00, 0x00, 0x01 };
1053 static const u8 poll_ready_seq[] = { 0x00, 0x04, 0x00, 0x00,
1054 0x00, 0x00, 0x0b, 0x18 };
1055 u8 *buf = kzalloc(MICROBOOK_BUF_SIZE, GFP_KERNEL);
1056
1057 if (!buf)
1058 return -ENOMEM;
1059
1060 dev_info(&dev->dev, "Waiting for MOTU Microbook II to boot up...\n");
1061
1062 /* First we tell the device which sample rate to use. */
1063 memcpy(buf, set_samplerate_seq, sizeof(set_samplerate_seq));
1064 actual_length = sizeof(set_samplerate_seq);
1065 err = snd_usb_motu_microbookii_communicate(dev, buf, MICROBOOK_BUF_SIZE,
1066 &actual_length);
1067
1068 if (err < 0) {
1069 dev_err(&dev->dev,
1070 "failed setting the sample rate for Motu MicroBook II: %d\n",
1071 err);
1072 goto free_buf;
1073 }
1074
1075 /* Then we poll every 100 ms until the device informs of its readiness. */
1076 while (true) {
1077 if (++poll_attempts > 100) {
1078 dev_err(&dev->dev,
1079 "failed booting Motu MicroBook II: timeout\n");
1080 err = -ENODEV;
1081 goto free_buf;
1082 }
1083
1084 memset(buf, 0, MICROBOOK_BUF_SIZE);
1085 memcpy(buf, poll_ready_seq, sizeof(poll_ready_seq));
1086
1087 actual_length = sizeof(poll_ready_seq);
1088 err = snd_usb_motu_microbookii_communicate(
1089 dev, buf, MICROBOOK_BUF_SIZE, &actual_length);
1090 if (err < 0) {
1091 dev_err(&dev->dev,
1092 "failed booting Motu MicroBook II: communication error %d\n",
1093 err);
1094 goto free_buf;
1095 }
1096
1097 /* the device signals its readiness through a message of the
1098 * form
1099 * XX 06 00 00 00 00 0b 18 00 00 00 01
1100 * If the device is not yet ready to accept audio data, the
1101 * last byte of that sequence is 00.
1102 */
1103 if (actual_length == 12 && buf[actual_length - 1] == 1)
1104 break;
1105
1106 msleep(100);
1107 }
1108
1109 dev_info(&dev->dev, "MOTU MicroBook II ready\n");
1110
1111 free_buf:
1112 kfree(buf);
1113 return err;
1114 }
1115
1116 static int snd_usb_motu_m_series_boot_quirk(struct usb_device *dev)
1117 {
1118 int ret;
1119
1120 if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0)))
1121 return -EINVAL;
1122 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
1123 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1124 0x0, 0, NULL, 0, 1000);
1125
1126 if (ret < 0)
1127 return ret;
1128
1129 msleep(2000);
1130
1131 ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
1132 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
1133 0x20, 0, NULL, 0, 1000);
1134
1135 if (ret < 0)
1136 return ret;
1137
1138 return 0;
1139 }
1140
1141 /*
1142 * Setup quirks
1143 */
1144 #define MAUDIO_SET 0x01 /* parse device_setup */
1145 #define MAUDIO_SET_COMPATIBLE 0x80 /* use only "win-compatible" interfaces */
1146 #define MAUDIO_SET_DTS 0x02 /* enable DTS Digital Output */
1147 #define MAUDIO_SET_96K 0x04 /* 48-96KHz rate if set, 8-48KHz otherwise */
1148 #define MAUDIO_SET_24B 0x08 /* 24bits sample if set, 16bits otherwise */
1149 #define MAUDIO_SET_DI 0x10 /* enable Digital Input */
1150 #define MAUDIO_SET_MASK 0x1f /* bit mask for setup value */
1151 #define MAUDIO_SET_24B_48K_DI 0x19 /* 24bits+48KHz+Digital Input */
1152 #define MAUDIO_SET_24B_48K_NOTDI 0x09 /* 24bits+48KHz+No Digital Input */
1153 #define MAUDIO_SET_16B_48K_DI 0x11 /* 16bits+48KHz+Digital Input */
1154 #define MAUDIO_SET_16B_48K_NOTDI 0x01 /* 16bits+48KHz+No Digital Input */
1155
1156 static int quattro_skip_setting_quirk(struct snd_usb_audio *chip,
1157 int iface, int altno)
1158 {
1159 /* Reset ALL ifaces to 0 altsetting.
1160 * Call it for every possible altsetting of every interface.
1161 */
1162 usb_set_interface(chip->dev, iface, 0);
1163 if (chip->setup & MAUDIO_SET) {
1164 if (chip->setup & MAUDIO_SET_COMPATIBLE) {
1165 if (iface != 1 && iface != 2)
1166 return 1; /* skip all interfaces but 1 and 2 */
1167 } else {
1168 unsigned int mask;
1169 if (iface == 1 || iface == 2)
1170 return 1; /* skip interfaces 1 and 2 */
1171 if ((chip->setup & MAUDIO_SET_96K) && altno != 1)
1172 return 1; /* skip this altsetting */
1173 mask = chip->setup & MAUDIO_SET_MASK;
1174 if (mask == MAUDIO_SET_24B_48K_DI && altno != 2)
1175 return 1; /* skip this altsetting */
1176 if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3)
1177 return 1; /* skip this altsetting */
1178 if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 4)
1179 return 1; /* skip this altsetting */
1180 }
1181 }
1182 usb_audio_dbg(chip,
1183 "using altsetting %d for interface %d config %d\n",
1184 altno, iface, chip->setup);
1185 return 0; /* keep this altsetting */
1186 }
1187
1188 static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip,
1189 int iface,
1190 int altno)
1191 {
1192 /* Reset ALL ifaces to 0 altsetting.
1193 * Call it for every possible altsetting of every interface.
1194 */
1195 usb_set_interface(chip->dev, iface, 0);
1196
1197 if (chip->setup & MAUDIO_SET) {
1198 unsigned int mask;
1199 if ((chip->setup & MAUDIO_SET_DTS) && altno != 6)
1200 return 1; /* skip this altsetting */
1201 if ((chip->setup & MAUDIO_SET_96K) && altno != 1)
1202 return 1; /* skip this altsetting */
1203 mask = chip->setup & MAUDIO_SET_MASK;
1204 if (mask == MAUDIO_SET_24B_48K_DI && altno != 2)
1205 return 1; /* skip this altsetting */
1206 if (mask == MAUDIO_SET_24B_48K_NOTDI && altno != 3)
1207 return 1; /* skip this altsetting */
1208 if (mask == MAUDIO_SET_16B_48K_DI && altno != 4)
1209 return 1; /* skip this altsetting */
1210 if (mask == MAUDIO_SET_16B_48K_NOTDI && altno != 5)
1211 return 1; /* skip this altsetting */
1212 }
1213
1214 return 0; /* keep this altsetting */
1215 }
1216
1217 static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip,
1218 int iface, int altno)
1219 {
1220 /* Reset ALL ifaces to 0 altsetting.
1221 * Call it for every possible altsetting of every interface.
1222 */
1223 usb_set_interface(chip->dev, iface, 0);
1224
1225 /* possible configuration where both inputs and only one output is
1226 *used is not supported by the current setup
1227 */
1228 if (chip->setup & (MAUDIO_SET | MAUDIO_SET_24B)) {
1229 if (chip->setup & MAUDIO_SET_96K) {
1230 if (altno != 3 && altno != 6)
1231 return 1;
1232 } else if (chip->setup & MAUDIO_SET_DI) {
1233 if (iface == 4)
1234 return 1; /* no analog input */
1235 if (altno != 2 && altno != 5)
1236 return 1; /* enable only altsets 2 and 5 */
1237 } else {
1238 if (iface == 5)
1239 return 1; /* disable digialt input */
1240 if (altno != 2 && altno != 5)
1241 return 1; /* enalbe only altsets 2 and 5 */
1242 }
1243 } else {
1244 /* keep only 16-Bit mode */
1245 if (altno != 1)
1246 return 1;
1247 }
1248
1249 usb_audio_dbg(chip,
1250 "using altsetting %d for interface %d config %d\n",
1251 altno, iface, chip->setup);
1252 return 0; /* keep this altsetting */
1253 }
1254
1255 static int s1810c_skip_setting_quirk(struct snd_usb_audio *chip,
1256 int iface, int altno)
1257 {
1258 /*
1259 * Altno settings:
1260 *
1261 * Playback (Interface 1):
1262 * 1: 6 Analog + 2 S/PDIF
1263 * 2: 6 Analog + 2 S/PDIF
1264 * 3: 6 Analog
1265 *
1266 * Capture (Interface 2):
1267 * 1: 8 Analog + 2 S/PDIF + 8 ADAT
1268 * 2: 8 Analog + 2 S/PDIF + 4 ADAT
1269 * 3: 8 Analog
1270 */
1271
1272 /*
1273 * I'll leave 2 as the default one and
1274 * use device_setup to switch to the
1275 * other two.
1276 */
1277 if ((chip->setup == 0 || chip->setup > 2) && altno != 2)
1278 return 1;
1279 else if (chip->setup == 1 && altno != 1)
1280 return 1;
1281 else if (chip->setup == 2 && altno != 3)
1282 return 1;
1283
1284 return 0;
1285 }
1286
1287 int snd_usb_apply_interface_quirk(struct snd_usb_audio *chip,
1288 int iface,
1289 int altno)
1290 {
1291 /* audiophile usb: skip altsets incompatible with device_setup */
1292 if (chip->usb_id == USB_ID(0x0763, 0x2003))
1293 return audiophile_skip_setting_quirk(chip, iface, altno);
1294 /* quattro usb: skip altsets incompatible with device_setup */
1295 if (chip->usb_id == USB_ID(0x0763, 0x2001))
1296 return quattro_skip_setting_quirk(chip, iface, altno);
1297 /* fasttrackpro usb: skip altsets incompatible with device_setup */
1298 if (chip->usb_id == USB_ID(0x0763, 0x2012))
1299 return fasttrackpro_skip_setting_quirk(chip, iface, altno);
1300 /* presonus studio 1810c: skip altsets incompatible with device_setup */
1301 if (chip->usb_id == USB_ID(0x0194f, 0x010c))
1302 return s1810c_skip_setting_quirk(chip, iface, altno);
1303
1304
1305 return 0;
1306 }
1307
1308 int snd_usb_apply_boot_quirk(struct usb_device *dev,
1309 struct usb_interface *intf,
1310 const struct snd_usb_audio_quirk *quirk,
1311 unsigned int id)
1312 {
1313 switch (id) {
1314 case USB_ID(0x041e, 0x3000):
1315 /* SB Extigy needs special boot-up sequence */
1316 /* if more models come, this will go to the quirk list. */
1317 return snd_usb_extigy_boot_quirk(dev, intf);
1318
1319 case USB_ID(0x041e, 0x3020):
1320 /* SB Audigy 2 NX needs its own boot-up magic, too */
1321 return snd_usb_audigy2nx_boot_quirk(dev);
1322
1323 case USB_ID(0x10f5, 0x0200):
1324 /* C-Media CM106 / Turtle Beach Audio Advantage Roadie */
1325 return snd_usb_cm106_boot_quirk(dev);
1326
1327 case USB_ID(0x0d8c, 0x0102):
1328 /* C-Media CM6206 / CM106-Like Sound Device */
1329 case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */
1330 return snd_usb_cm6206_boot_quirk(dev);
1331
1332 case USB_ID(0x0dba, 0x3000):
1333 /* Digidesign Mbox 2 */
1334 return snd_usb_mbox2_boot_quirk(dev);
1335
1336 case USB_ID(0x1235, 0x0010): /* Focusrite Novation Saffire 6 USB */
1337 case USB_ID(0x1235, 0x0018): /* Focusrite Novation Twitch */
1338 return snd_usb_novation_boot_quirk(dev);
1339
1340 case USB_ID(0x133e, 0x0815):
1341 /* Access Music VirusTI Desktop */
1342 return snd_usb_accessmusic_boot_quirk(dev);
1343
1344 case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */
1345 case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */
1346 case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */
1347 return snd_usb_nativeinstruments_boot_quirk(dev);
1348 case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
1349 return snd_usb_fasttrackpro_boot_quirk(dev);
1350 case USB_ID(0x047f, 0xc010): /* Plantronics Gamecom 780 */
1351 return snd_usb_gamecon780_boot_quirk(dev);
1352 case USB_ID(0x2466, 0x8010): /* Fractal Audio Axe-Fx 3 */
1353 return snd_usb_axefx3_boot_quirk(dev);
1354 case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II */
1355 /*
1356 * For some reason interface 3 with vendor-spec class is
1357 * detected on MicroBook IIc.
1358 */
1359 if (get_iface_desc(intf->altsetting)->bInterfaceClass ==
1360 USB_CLASS_VENDOR_SPEC &&
1361 get_iface_desc(intf->altsetting)->bInterfaceNumber < 3)
1362 return snd_usb_motu_microbookii_boot_quirk(dev);
1363 break;
1364 }
1365
1366 return 0;
1367 }
1368
1369 int snd_usb_apply_boot_quirk_once(struct usb_device *dev,
1370 struct usb_interface *intf,
1371 const struct snd_usb_audio_quirk *quirk,
1372 unsigned int id)
1373 {
1374 switch (id) {
1375 case USB_ID(0x07fd, 0x0008): /* MOTU M Series */
1376 return snd_usb_motu_m_series_boot_quirk(dev);
1377 }
1378
1379 return 0;
1380 }
1381
1382 /*
1383 * check if the device uses big-endian samples
1384 */
1385 int snd_usb_is_big_endian_format(struct snd_usb_audio *chip, struct audioformat *fp)
1386 {
1387 /* it depends on altsetting whether the device is big-endian or not */
1388 switch (chip->usb_id) {
1389 case USB_ID(0x0763, 0x2001): /* M-Audio Quattro: captured data only */
1390 if (fp->altsetting == 2 || fp->altsetting == 3 ||
1391 fp->altsetting == 5 || fp->altsetting == 6)
1392 return 1;
1393 break;
1394 case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
1395 if (chip->setup == 0x00 ||
1396 fp->altsetting == 1 || fp->altsetting == 2 ||
1397 fp->altsetting == 3)
1398 return 1;
1399 break;
1400 case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro */
1401 if (fp->altsetting == 2 || fp->altsetting == 3 ||
1402 fp->altsetting == 5 || fp->altsetting == 6)
1403 return 1;
1404 break;
1405 }
1406 return 0;
1407 }
1408
1409 /*
1410 * For E-Mu 0404USB/0202USB/TrackerPre/0204 sample rate should be set for device,
1411 * not for interface.
1412 */
1413
1414 enum {
1415 EMU_QUIRK_SR_44100HZ = 0,
1416 EMU_QUIRK_SR_48000HZ,
1417 EMU_QUIRK_SR_88200HZ,
1418 EMU_QUIRK_SR_96000HZ,
1419 EMU_QUIRK_SR_176400HZ,
1420 EMU_QUIRK_SR_192000HZ
1421 };
1422
1423 static void set_format_emu_quirk(struct snd_usb_substream *subs,
1424 struct audioformat *fmt)
1425 {
1426 unsigned char emu_samplerate_id = 0;
1427
1428 /* When capture is active
1429 * sample rate shouldn't be changed
1430 * by playback substream
1431 */
1432 if (subs->direction == SNDRV_PCM_STREAM_PLAYBACK) {
1433 if (subs->stream->substream[SNDRV_PCM_STREAM_CAPTURE].interface != -1)
1434 return;
1435 }
1436
1437 switch (fmt->rate_min) {
1438 case 48000:
1439 emu_samplerate_id = EMU_QUIRK_SR_48000HZ;
1440 break;
1441 case 88200:
1442 emu_samplerate_id = EMU_QUIRK_SR_88200HZ;
1443 break;
1444 case 96000:
1445 emu_samplerate_id = EMU_QUIRK_SR_96000HZ;
1446 break;
1447 case 176400:
1448 emu_samplerate_id = EMU_QUIRK_SR_176400HZ;
1449 break;
1450 case 192000:
1451 emu_samplerate_id = EMU_QUIRK_SR_192000HZ;
1452 break;
1453 default:
1454 emu_samplerate_id = EMU_QUIRK_SR_44100HZ;
1455 break;
1456 }
1457 snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id);
1458 subs->pkt_offset_adj = (emu_samplerate_id >= EMU_QUIRK_SR_176400HZ) ? 4 : 0;
1459 }
1460
1461 void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
1462 struct audioformat *fmt)
1463 {
1464 switch (subs->stream->chip->usb_id) {
1465 case USB_ID(0x041e, 0x3f02): /* E-Mu 0202 USB */
1466 case USB_ID(0x041e, 0x3f04): /* E-Mu 0404 USB */
1467 case USB_ID(0x041e, 0x3f0a): /* E-Mu Tracker Pre */
1468 case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */
1469 set_format_emu_quirk(subs, fmt);
1470 break;
1471 }
1472 }
1473
1474 bool snd_usb_get_sample_rate_quirk(struct snd_usb_audio *chip)
1475 {
1476 /* devices which do not support reading the sample rate. */
1477 switch (chip->usb_id) {
1478 case USB_ID(0x041e, 0x4080): /* Creative Live Cam VF0610 */
1479 case USB_ID(0x04d8, 0xfeea): /* Benchmark DAC1 Pre */
1480 case USB_ID(0x0556, 0x0014): /* Phoenix Audio TMX320VC */
1481 case USB_ID(0x05a3, 0x9420): /* ELP HD USB Camera */
1482 case USB_ID(0x05a7, 0x1020): /* Bose Companion 5 */
1483 case USB_ID(0x074d, 0x3553): /* Outlaw RR2150 (Micronas UAC3553B) */
1484 case USB_ID(0x1395, 0x740a): /* Sennheiser DECT */
1485 case USB_ID(0x1901, 0x0191): /* GE B850V3 CP2114 audio interface */
1486 case USB_ID(0x21b4, 0x0081): /* AudioQuest DragonFly */
1487 case USB_ID(0x2912, 0x30c8): /* Audioengine D1 */
1488 return true;
1489 }
1490
1491 /* devices of these vendors don't support reading rate, either */
1492 switch (USB_ID_VENDOR(chip->usb_id)) {
1493 case 0x045e: /* MS Lifecam */
1494 case 0x047f: /* Plantronics */
1495 case 0x1de7: /* Phoenix Audio */
1496 return true;
1497 }
1498
1499 return false;
1500 }
1501
1502 /* ITF-USB DSD based DACs need a vendor cmd to switch
1503 * between PCM and native DSD mode
1504 */
1505 static bool is_itf_usb_dsd_dac(unsigned int id)
1506 {
1507 switch (id) {
1508 case USB_ID(0x154e, 0x1003): /* Denon DA-300USB */
1509 case USB_ID(0x154e, 0x3005): /* Marantz HD-DAC1 */
1510 case USB_ID(0x154e, 0x3006): /* Marantz SA-14S1 */
1511 case USB_ID(0x1852, 0x5065): /* Luxman DA-06 */
1512 case USB_ID(0x0644, 0x8043): /* TEAC UD-501/UD-501V2/UD-503/NT-503 */
1513 case USB_ID(0x0644, 0x8044): /* Esoteric D-05X */
1514 case USB_ID(0x0644, 0x804a): /* TEAC UD-301 */
1515 return true;
1516 }
1517 return false;
1518 }
1519
1520 int snd_usb_select_mode_quirk(struct snd_usb_substream *subs,
1521 struct audioformat *fmt)
1522 {
1523 struct usb_device *dev = subs->dev;
1524 int err;
1525
1526 if (is_itf_usb_dsd_dac(subs->stream->chip->usb_id)) {
1527 /* First switch to alt set 0, otherwise the mode switch cmd
1528 * will not be accepted by the DAC
1529 */
1530 err = usb_set_interface(dev, fmt->iface, 0);
1531 if (err < 0)
1532 return err;
1533
1534 msleep(20); /* Delay needed after setting the interface */
1535
1536 /* Vendor mode switch cmd is required. */
1537 if (fmt->formats & SNDRV_PCM_FMTBIT_DSD_U32_BE) {
1538 /* DSD mode (DSD_U32) requested */
1539 err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0,
1540 USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
1541 1, 1, NULL, 0);
1542 if (err < 0)
1543 return err;
1544
1545 } else {
1546 /* PCM or DOP mode (S32) requested */
1547 /* PCM mode (S16) requested */
1548 err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0,
1549 USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
1550 0, 1, NULL, 0);
1551 if (err < 0)
1552 return err;
1553
1554 }
1555 msleep(20);
1556 }
1557 return 0;
1558 }
1559
1560 void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep)
1561 {
1562 /*
1563 * "Playback Design" products send bogus feedback data at the start
1564 * of the stream. Ignore them.
1565 */
1566 if (USB_ID_VENDOR(ep->chip->usb_id) == 0x23ba &&
1567 ep->type == SND_USB_ENDPOINT_TYPE_SYNC)
1568 ep->skip_packets = 4;
1569
1570 /*
1571 * M-Audio Fast Track C400/C600 - when packets are not skipped, real
1572 * world latency varies by approx. +/- 50 frames (at 96KHz) each time
1573 * the stream is (re)started. When skipping packets 16 at endpoint
1574 * start up, the real world latency is stable within +/- 1 frame (also
1575 * across power cycles).
1576 */
1577 if ((ep->chip->usb_id == USB_ID(0x0763, 0x2030) ||
1578 ep->chip->usb_id == USB_ID(0x0763, 0x2031)) &&
1579 ep->type == SND_USB_ENDPOINT_TYPE_DATA)
1580 ep->skip_packets = 16;
1581
1582 /* Work around devices that report unreasonable feedback data */
1583 if ((ep->chip->usb_id == USB_ID(0x0644, 0x8038) || /* TEAC UD-H01 */
1584 ep->chip->usb_id == USB_ID(0x1852, 0x5034)) && /* T+A Dac8 */
1585 ep->syncmaxsize == 4)
1586 ep->tenor_fb_quirk = 1;
1587 }
1588
1589 void snd_usb_set_interface_quirk(struct usb_device *dev)
1590 {
1591 struct snd_usb_audio *chip = dev_get_drvdata(&dev->dev);
1592
1593 if (!chip)
1594 return;
1595 /*
1596 * "Playback Design" products need a 50ms delay after setting the
1597 * USB interface.
1598 */
1599 switch (USB_ID_VENDOR(chip->usb_id)) {
1600 case 0x23ba: /* Playback Design */
1601 case 0x0644: /* TEAC Corp. */
1602 msleep(50);
1603 break;
1604 }
1605 }
1606
1607 /* quirk applied after snd_usb_ctl_msg(); not applied during boot quirks */
1608 void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe,
1609 __u8 request, __u8 requesttype, __u16 value,
1610 __u16 index, void *data, __u16 size)
1611 {
1612 struct snd_usb_audio *chip = dev_get_drvdata(&dev->dev);
1613
1614 if (!chip)
1615 return;
1616 /*
1617 * "Playback Design" products need a 20ms delay after each
1618 * class compliant request
1619 */
1620 if (USB_ID_VENDOR(chip->usb_id) == 0x23ba &&
1621 (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
1622 msleep(20);
1623
1624 /*
1625 * "TEAC Corp." products need a 20ms delay after each
1626 * class compliant request
1627 */
1628 if (USB_ID_VENDOR(chip->usb_id) == 0x0644 &&
1629 (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
1630 msleep(20);
1631
1632 /* ITF-USB DSD based DACs functionality need a delay
1633 * after each class compliant request
1634 */
1635 if (is_itf_usb_dsd_dac(chip->usb_id)
1636 && (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
1637 msleep(20);
1638
1639 /* Zoom R16/24, Logitech H650e, Jabra 550a needs a tiny delay here,
1640 * otherwise requests like get/set frequency return as failed despite
1641 * actually succeeding.
1642 */
1643 if ((chip->usb_id == USB_ID(0x1686, 0x00dd) ||
1644 chip->usb_id == USB_ID(0x046d, 0x0a46) ||
1645 chip->usb_id == USB_ID(0x0b0e, 0x0349)) &&
1646 (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
1647 usleep_range(1000, 2000);
1648 }
1649
1650 /*
1651 * snd_usb_interface_dsd_format_quirks() is called from format.c to
1652 * augment the PCM format bit-field for DSD types. The UAC standards
1653 * don't have a designated bit field to denote DSD-capable interfaces,
1654 * hence all hardware that is known to support this format has to be
1655 * listed here.
1656 */
1657 u64 snd_usb_interface_dsd_format_quirks(struct snd_usb_audio *chip,
1658 struct audioformat *fp,
1659 unsigned int sample_bytes)
1660 {
1661 struct usb_interface *iface;
1662
1663 /* Playback Designs */
1664 if (USB_ID_VENDOR(chip->usb_id) == 0x23ba &&
1665 USB_ID_PRODUCT(chip->usb_id) < 0x0110) {
1666 switch (fp->altsetting) {
1667 case 1:
1668 fp->dsd_dop = true;
1669 return SNDRV_PCM_FMTBIT_DSD_U16_LE;
1670 case 2:
1671 fp->dsd_bitrev = true;
1672 return SNDRV_PCM_FMTBIT_DSD_U8;
1673 case 3:
1674 fp->dsd_bitrev = true;
1675 return SNDRV_PCM_FMTBIT_DSD_U16_LE;
1676 }
1677 }
1678
1679 /* XMOS based USB DACs */
1680 switch (chip->usb_id) {
1681 case USB_ID(0x1511, 0x0037): /* AURALiC VEGA */
1682 case USB_ID(0x2522, 0x0012): /* LH Labs VI DAC Infinity */
1683 case USB_ID(0x2772, 0x0230): /* Pro-Ject Pre Box S2 Digital */
1684 if (fp->altsetting == 2)
1685 return SNDRV_PCM_FMTBIT_DSD_U32_BE;
1686 break;
1687
1688 case USB_ID(0x0d8c, 0x0316): /* Hegel HD12 DSD */
1689 case USB_ID(0x10cb, 0x0103): /* The Bit Opus #3; with fp->dsd_raw */
1690 case USB_ID(0x16d0, 0x06b2): /* NuPrime DAC-10 */
1691 case USB_ID(0x16d0, 0x09dd): /* Encore mDSD */
1692 case USB_ID(0x16d0, 0x0733): /* Furutech ADL Stratos */
1693 case USB_ID(0x16d0, 0x09db): /* NuPrime Audio DAC-9 */
1694 case USB_ID(0x1db5, 0x0003): /* Bryston BDA3 */
1695 case USB_ID(0x22e1, 0xca01): /* HDTA Serenade DSD */
1696 case USB_ID(0x249c, 0x9326): /* M2Tech Young MkIII */
1697 case USB_ID(0x2616, 0x0106): /* PS Audio NuWave DAC */
1698 case USB_ID(0x2622, 0x0041): /* Audiolab M-DAC+ */
1699 case USB_ID(0x27f7, 0x3002): /* W4S DAC-2v2SE */
1700 case USB_ID(0x29a2, 0x0086): /* Mutec MC3+ USB */
1701 case USB_ID(0x6b42, 0x0042): /* MSB Technology */
1702 if (fp->altsetting == 3)
1703 return SNDRV_PCM_FMTBIT_DSD_U32_BE;
1704 break;
1705
1706 /* Amanero Combo384 USB based DACs with native DSD support */
1707 case USB_ID(0x16d0, 0x071a): /* Amanero - Combo384 */
1708 case USB_ID(0x2ab6, 0x0004): /* T+A DAC8DSD-V2.0, MP1000E-V2.0, MP2000R-V2.0, MP2500R-V2.0, MP3100HV-V2.0 */
1709 case USB_ID(0x2ab6, 0x0005): /* T+A USB HD Audio 1 */
1710 case USB_ID(0x2ab6, 0x0006): /* T+A USB HD Audio 2 */
1711 if (fp->altsetting == 2) {
1712 switch (le16_to_cpu(chip->dev->descriptor.bcdDevice)) {
1713 case 0x199:
1714 return SNDRV_PCM_FMTBIT_DSD_U32_LE;
1715 case 0x19b:
1716 case 0x203:
1717 return SNDRV_PCM_FMTBIT_DSD_U32_BE;
1718 default:
1719 break;
1720 }
1721 }
1722 break;
1723 case USB_ID(0x16d0, 0x0a23):
1724 if (fp->altsetting == 2)
1725 return SNDRV_PCM_FMTBIT_DSD_U32_BE;
1726 break;
1727
1728 default:
1729 break;
1730 }
1731
1732 /* ITF-USB DSD based DACs */
1733 if (is_itf_usb_dsd_dac(chip->usb_id)) {
1734 iface = usb_ifnum_to_if(chip->dev, fp->iface);
1735
1736 /* Altsetting 2 support native DSD if the num of altsets is
1737 * three (0-2),
1738 * Altsetting 3 support native DSD if the num of altsets is
1739 * four (0-3).
1740 */
1741 if (fp->altsetting == iface->num_altsetting - 1)
1742 return SNDRV_PCM_FMTBIT_DSD_U32_BE;
1743 }
1744
1745 /* Mostly generic method to detect many DSD-capable implementations -
1746 * from XMOS/Thesycon
1747 */
1748 switch (USB_ID_VENDOR(chip->usb_id)) {
1749 case 0x152a: /* Thesycon devices */
1750 case 0x20b1: /* XMOS based devices */
1751 case 0x22d9: /* Oppo */
1752 case 0x23ba: /* Playback Designs */
1753 case 0x25ce: /* Mytek devices */
1754 case 0x278b: /* Rotel? */
1755 case 0x292b: /* Gustard/Ess based devices */
1756 case 0x2ab6: /* T+A devices */
1757 case 0x3842: /* EVGA */
1758 case 0xc502: /* HiBy devices */
1759 if (fp->dsd_raw)
1760 return SNDRV_PCM_FMTBIT_DSD_U32_BE;
1761 break;
1762 default:
1763 break;
1764
1765 }
1766
1767 return 0;
1768 }
1769
1770 void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip,
1771 struct audioformat *fp,
1772 int stream)
1773 {
1774 switch (chip->usb_id) {
1775 case USB_ID(0x0a92, 0x0053): /* AudioTrak Optoplay */
1776 /* Optoplay sets the sample rate attribute although
1777 * it seems not supporting it in fact.
1778 */
1779 fp->attributes &= ~UAC_EP_CS_ATTR_SAMPLE_RATE;
1780 break;
1781 case USB_ID(0x041e, 0x3020): /* Creative SB Audigy 2 NX */
1782 case USB_ID(0x0763, 0x2003): /* M-Audio Audiophile USB */
1783 /* doesn't set the sample rate attribute, but supports it */
1784 fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE;
1785 break;
1786 case USB_ID(0x0763, 0x2001): /* M-Audio Quattro USB */
1787 case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
1788 case USB_ID(0x047f, 0x0ca1): /* plantronics headset */
1789 case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is
1790 an older model 77d:223) */
1791 /*
1792 * plantronics headset and Griffin iMic have set adaptive-in
1793 * although it's really not...
1794 */
1795 fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
1796 if (stream == SNDRV_PCM_STREAM_PLAYBACK)
1797 fp->ep_attr |= USB_ENDPOINT_SYNC_ADAPTIVE;
1798 else
1799 fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC;
1800 break;
1801 case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook IIc */
1802 /*
1803 * MaxPacketsOnly attribute is erroneously set in endpoint
1804 * descriptors. As a result this card produces noise with
1805 * all sample rates other than 96 KHz.
1806 */
1807 fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX;
1808 break;
1809 case USB_ID(0x1235, 0x8200): /* Focusrite Scarlett 2i4 2nd gen */
1810 case USB_ID(0x1235, 0x8202): /* Focusrite Scarlett 2i2 2nd gen */
1811 case USB_ID(0x1235, 0x8205): /* Focusrite Scarlett Solo 2nd gen */
1812 /*
1813 * Reports that playback should use Synch: Synchronous
1814 * while still providing a feedback endpoint.
1815 * Synchronous causes snapping on some sample rates.
1816 * Force it to use Synch: Asynchronous.
1817 */
1818 if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
1819 fp->ep_attr &= ~USB_ENDPOINT_SYNCTYPE;
1820 fp->ep_attr |= USB_ENDPOINT_SYNC_ASYNC;
1821 }
1822 break;
1823 }
1824 }
1825
1826 /*
1827 * registration quirk:
1828 * the registration is skipped if a device matches with the given ID,
1829 * unless the interface reaches to the defined one. This is for delaying
1830 * the registration until the last known interface, so that the card and
1831 * devices appear at the same time.
1832 */
1833
1834 struct registration_quirk {
1835 unsigned int usb_id; /* composed via USB_ID() */
1836 unsigned int interface; /* the interface to trigger register */
1837 };
1838
1839 #define REG_QUIRK_ENTRY(vendor, product, iface) \
1840 { .usb_id = USB_ID(vendor, product), .interface = (iface) }
1841
1842 static const struct registration_quirk registration_quirks[] = {
1843 REG_QUIRK_ENTRY(0x0951, 0x16d8, 2), /* Kingston HyperX AMP */
1844 REG_QUIRK_ENTRY(0x0951, 0x16ed, 2), /* Kingston HyperX Cloud Alpha S */
1845 { 0 } /* terminator */
1846 };
1847
1848 /* return true if skipping registration */
1849 bool snd_usb_registration_quirk(struct snd_usb_audio *chip, int iface)
1850 {
1851 const struct registration_quirk *q;
1852
1853 for (q = registration_quirks; q->usb_id; q++)
1854 if (chip->usb_id == q->usb_id)
1855 return iface != q->interface;
1856
1857 /* Register as normal */
1858 return false;
1859 }
A mirror of Linus' kernel repository