src/arm/broadcom/bcm47094-dlink-dir-885l.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /*
   3  * Broadcom BCM470X / BCM5301X ARM platform code.
   4  * DTS for D-Link DIR-885L
   5  *
   6  * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
   7  */
   8
   9 /dts-v1/;
  10
  11 #include "bcm47094.dtsi"
  12 #include "bcm5301x-nand-cs0-bch1.dtsi"
  13
  14 / {
  15         compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
  16         model = "D-Link DIR-885L";
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200 earlycon";
  20         };
  21
  22         memory@0 {
  23                 device_type = "memory";
  24                 reg = <0x00000000 0x08000000>,
  25                       <0x88000000 0x08000000>;
  26         };
  27
  28         nvram@1e3f0000 {
  29                 compatible = "brcm,nvram";
  30                 reg = <0x1e3f0000 0x10000>;
  31
  32                 et2macaddr: et2macaddr {
  33                         #nvmem-cell-cells = <1>;
  34                 };
  35         };
  36
  37         nand_controller: nand-controller@18028000 {
  38                 nand@0 {
  39                         partitions {
  40                                 compatible = "fixed-partitions";
  41                                 #address-cells = <1>;
  42                                 #size-cells = <1>;
  43
  44                                 partition@0 {
  45                                         compatible = "seama";
  46                                         label = "firmware";
  47                                         reg = <0x00000000 0x08000000>;
  48                                 };
  49                         };
  50                 };
  51         };
  52
  53         leds {
  54                 compatible = "gpio-leds";
  55
  56                 led-power-white {
  57                         label = "bcm53xx:white:power";
  58                         gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
  59                         linux,default-trigger = "default-on";
  60                 };
  61
  62                 led-wan-white {
  63                         label = "bcm53xx:white:wan";
  64                         gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 led-power-amber {
  68                         label = "bcm53xx:amber:power";
  69                         gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
  70                 };
  71
  72                 led-wan-amber {
  73                         label = "bcm53xx:amber:wan";
  74                         gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
  75                 };
  76
  77                 led-usb3-white {
  78                         label = "bcm53xx:white:usb3";
  79                         gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
  80                         trigger-sources = <&ohci_port1>, <&ehci_port1>,
  81                                           <&xhci_port1>;
  82                         linux,default-trigger = "usbport";
  83                 };
  84
  85                 led-2ghz {
  86                         label = "bcm53xx:white:2ghz";
  87                         gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
  88                 };
  89
  90                 led-5ghz {
  91                         label = "bcm53xx:white:5ghz";
  92                         gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
  93                 };
  94         };
  95
  96         gpio-keys {
  97                 compatible = "gpio-keys";
  98
  99                 button-wps {
 100                         label = "WPS";
 101                         linux,code = <KEY_WPS_BUTTON>;
 102                         gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 103                 };
 104
 105                 /* Switch: router / extender */
 106                 button-extender {
 107                         label = "Extender";
 108                         linux,code = <BTN_0>;
 109                         gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 110                 };
 111
 112                 button-restart {
 113                         label = "Reset";
 114                         linux,code = <KEY_RESTART>;
 115                         gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 116                 };
 117         };
 118 };
 119
 120 &usb3 {
 121         vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 122 };
 123
 124 &gmac0 {
 125         nvmem-cells = <&et2macaddr 0>;
 126         nvmem-cell-names = "mac-address";
 127 };
 128
 129 &spi_nor {
 130         status = "okay";
 131 };
 132
 133 &usb3_phy {
 134         status = "okay";
 135 };
 136
 137 &srab {
 138         status = "okay";
 139
 140         ports {
 141                 port@0 {
 142                         label = "lan4";
 143                 };
 144
 145                 port@1 {
 146                         label = "lan3";
 147                 };
 148
 149                 port@2 {
 150                         label = "lan2";
 151                 };
 152
 153                 port@3 {
 154                         label = "lan1";
 155                 };
 156
 157                 port@4 {
 158                         label = "wan";
 159                         nvmem-cells = <&et2macaddr 3>;
 160                         nvmem-cell-names = "mac-address";
 161                 };
 162
 163                 port@5 {
 164                         status = "disabled";
 165                 };
 166
 167                 port@7 {
 168                         status = "disabled";
 169                 };
 170
 171                 port@8 {
 172                         label = "cpu";
 173                 };
 174         };
 175 };