src/arm/broadcom/bcm47094-linksys-panamera.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /*
   3  * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "bcm47094.dtsi"
   9 #include "bcm5301x-nand-cs0-bch8.dtsi"
  10
  11 / {
  12         compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
  13         model = "Linksys EA9500";
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200";
  17         };
  18
  19         memory@0 {
  20                 device_type = "memory";
  21                 reg = <0x00000000 0x08000000>,
  22                       <0x88000000 0x08000000>;
  23         };
  24
  25         nvram@1c080000 {
  26                 compatible = "brcm,nvram";
  27                 reg = <0x1c080000 0x100000>;
  28         };
  29
  30         gpio-keys {
  31                 compatible = "gpio-keys";
  32
  33                 button-wps {
  34                         label = "WPS";
  35                         linux,code = <KEY_WPS_BUTTON>;
  36                         gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
  37                 };
  38
  39                 button-rfkill {
  40                                 label = "WiFi";
  41                                 linux,code = <KEY_RFKILL>;
  42                                 gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 button-reset {
  46                                 label = "Reset";
  47                                 linux,code = <KEY_RESTART>;
  48                                 gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
  49                 };
  50         };
  51
  52         leds {
  53                 compatible = "gpio-leds";
  54
  55                 led-wps {
  56                         label = "bcm53xx:white:wps";
  57                         gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 led-usb2 {
  61                         label = "bcm53xx:green:usb2";
  62                         gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
  63                         trigger-sources = <&ohci_port2>, <&ehci_port2>;
  64                         linux,default-trigger = "usbport";
  65                 };
  66
  67                 led-usb3 {
  68                         label = "bcm53xx:green:usb3";
  69                         gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
  70                         trigger-sources = <&ohci_port1>, <&ehci_port1>,
  71                                           <&xhci_port1>;
  72                         linux,default-trigger = "usbport";
  73                 };
  74
  75                 led-power {
  76                         label = "bcm53xx:white:power";
  77                         gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
  78                         linux,default-trigger = "default-on";
  79                 };
  80
  81                 led-wifi-disabled {
  82                         label = "bcm53xx:amber:wifi-disabled";
  83                         gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
  84                 };
  85
  86                 led-wifi-enabled {
  87                         label = "bcm53xx:white:wifi-enabled";
  88                         gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
  89                 };
  90
  91                 led-bluebar1 {
  92                         label = "bcm53xx:white:bluebar1";
  93                         gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
  94                 };
  95
  96                 led-bluebar2 {
  97                         label = "bcm53xx:white:bluebar2";
  98                         gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
  99                 };
 100
 101                 led-bluebar3 {
 102                         label = "bcm53xx:white:bluebar3";
 103                         gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 104                 };
 105
 106                 led-bluebar4 {
 107                         label = "bcm53xx:white:bluebar4";
 108                         gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 109                 };
 110
 111                 led-bluebar5 {
 112                         label = "bcm53xx:white:bluebar5";
 113                         gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
 114                 };
 115
 116                 led-bluebar6 {
 117                         label = "bcm53xx:white:bluebar6";
 118                         gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
 119                 };
 120
 121                 led-bluebar7 {
 122                         label = "bcm53xx:white:bluebar7";
 123                         gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
 124                 };
 125
 126                 led-bluebar8 {
 127                         label = "bcm53xx:white:bluebar8";
 128                         gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 129                 };
 130         };
 131
 132         mdio-mux@18003000 {
 133
 134                 /* BIT(9) = 1 => external mdio */
 135                 mdio@200 {
 136                         reg = <0x200>;
 137                         #address-cells = <1>;
 138                         #size-cells = <0>;
 139
 140                         switch@0  {
 141                                 compatible = "brcm,bcm53125";
 142                                 #address-cells = <1>;
 143                                 #size-cells = <0>;
 144                                 reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 145                                 reset-names = "robo_reset";
 146                                 reg = <0>;
 147                                 dsa,member = <1 0>;
 148                                 pinctrl-names = "default";
 149                                 pinctrl-0 = <&pinmux_mdio>;
 150
 151                                 ports {
 152                                         #address-cells = <1>;
 153                                         #size-cells = <0>;
 154
 155                                         port@0 {
 156                                                 reg = <0>;
 157                                                 label = "lan1";
 158                                         };
 159
 160                                         port@1 {
 161                                                 reg = <1>;
 162                                                 label = "lan5";
 163                                         };
 164
 165                                         port@2 {
 166                                                 reg = <2>;
 167                                                 label = "lan2";
 168                                         };
 169
 170                                         port@3 {
 171                                                 reg = <3>;
 172                                                 label = "lan6";
 173                                         };
 174
 175                                         port@4 {
 176                                                 reg = <4>;
 177                                                 label = "lan3";
 178                                         };
 179
 180                                         sw1_p8: port@8 {
 181                                                 reg = <8>;
 182                                                 ethernet = <&sw0_p0>;
 183                                                 label = "cpu";
 184
 185                                                 fixed-link {
 186                                                         speed = <1000>;
 187                                                         full-duplex;
 188                                                 };
 189                                         };
 190                                 };
 191                         };
 192                 };
 193         };
 194 };
 195
 196 &usb2 {
 197         vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 198 };
 199
 200 &usb3 {
 201         vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 202 };
 203
 204 &srab {
 205         compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
 206         status = "okay";
 207         dsa,member = <0 0>;
 208
 209         ports {
 210                 sw0_p0: port@0 {
 211                         label = "extsw";
 212
 213                         fixed-link {
 214                                 speed = <1000>;
 215                                 full-duplex;
 216                         };
 217                 };
 218
 219                 port@1 {
 220                         label = "lan7";
 221                 };
 222
 223                 port@2 {
 224                         label = "lan4";
 225                 };
 226
 227                 port@3 {
 228                         label = "lan8";
 229                 };
 230
 231                 port@4 {
 232                         label = "wan";
 233                 };
 234
 235                 port@5 {
 236                         label = "cpu";
 237                         status = "disabled";
 238
 239                         fixed-link {
 240                                 speed = <1000>;
 241                                 full-duplex;
 242                         };
 243                 };
 244
 245                 port@7 {
 246                         label = "cpu";
 247                         status = "disabled";
 248
 249                         fixed-link {
 250                                 speed = <1000>;
 251                                 full-duplex;
 252                         };
 253                 };
 254
 255                 port@8 {
 256                         label = "cpu";
 257                 };
 258         };
 259 };
 260
 261 &usb3_phy {
 262         status = "okay";
 263 };
 264
 265 &nandcs {
 266         partitions {
 267                 compatible = "linksys,ns-partitions";
 268                 #address-cells = <1>;
 269                 #size-cells = <1>;
 270
 271                 partition@0 {
 272                         label = "boot";
 273                         reg = <0x0000000 0x0080000>;
 274                         read-only;
 275                 };
 276
 277                 partition@80000 {
 278                         label = "nvram";
 279                         reg = <0x080000 0x0100000>;
 280                 };
 281
 282                 partition@180000 {
 283                         label = "devinfo";
 284                         reg = <0x0180000 0x080000>;
 285                 };
 286
 287                 partition@200000 {
 288                         reg = <0x0200000 0x01d00000>;
 289                         compatible = "linksys,ns-firmware", "brcm,trx";
 290                 };
 291
 292                 partition@1f00000 {
 293                         reg = <0x01f00000 0x01d00000>;
 294                         compatible = "linksys,ns-firmware", "brcm,trx";
 295                 };
 296
 297                 partition@5200000 {
 298                         label = "system";
 299                         reg = <0x05200000 0x02e00000>;
 300                 };
 301         };
 302 };