src/arm/broadcom/bcm47094-luxul-xwr-3100.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /*
   3  * Copyright 2016 Luxul Inc.
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "bcm47094.dtsi"
   9 #include "bcm5301x-nand-cs0-bch4.dtsi"
  10
  11 / {
  12         compatible = "luxul,xwr-3100-v1", "brcm,bcm47094", "brcm,bcm4708";
  13         model = "Luxul XWR-3100 V1";
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200 earlycon";
  17         };
  18
  19         memory@0 {
  20                 device_type = "memory";
  21                 reg = <0x00000000 0x08000000>,
  22                       <0x88000000 0x08000000>;
  23         };
  24
  25         nvram@1eff0000 {
  26                 compatible = "brcm,nvram";
  27                 reg = <0x1eff0000 0x10000>;
  28
  29                 et0macaddr: et0macaddr {
  30                         #nvmem-cell-cells = <1>;
  31                 };
  32         };
  33
  34         leds {
  35                 compatible = "gpio-leds";
  36
  37                 led-power {
  38                         label = "bcm53xx:green:power";
  39                         gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
  40                         linux,default-trigger = "default-on";
  41                 };
  42
  43                 led-lan3 {
  44                         label = "bcm53xx:green:lan3";
  45                         gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 led-lan4 {
  49                         label = "bcm53xx:green:lan4";
  50                         gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 led-wan {
  54                         label = "bcm53xx:green:wan";
  55                         gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 led-lan1 {
  59                         label = "bcm53xx:green:lan1";
  60                         gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 led-lan2 {
  64                         label = "bcm53xx:green:lan2";
  65                         gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 led-usb3 {
  69                         label = "bcm53xx:green:usb3";
  70                         gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
  71                         trigger-sources = <&ohci_port1>, <&ehci_port1>,
  72                                           <&xhci_port1>;
  73                         linux,default-trigger = "usbport";
  74                 };
  75
  76                 led-status {
  77                         label = "bcm53xx:green:status";
  78                         gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
  79                         linux,default-trigger = "timer";
  80                 };
  81
  82                 led-2ghz {
  83                         label = "bcm53xx:green:2ghz";
  84                         gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
  85                 };
  86
  87                 led-5ghz {
  88                         label = "bcm53xx:green:5ghz";
  89                         gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
  90                 };
  91         };
  92
  93         gpio-keys {
  94                 compatible = "gpio-keys";
  95
  96                 button-restart {
  97                         label = "Reset";
  98                         linux,code = <KEY_RESTART>;
  99                         gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 100                 };
 101         };
 102 };
 103
 104 &usb3 {
 105         vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 106 };
 107
 108 &gmac0 {
 109         nvmem-cells = <&et0macaddr 0>;
 110         nvmem-cell-names = "mac-address";
 111 };
 112
 113 &spi_nor {
 114         status = "okay";
 115 };
 116
 117 &usb3_phy {
 118         status = "okay";
 119 };
 120
 121 &srab {
 122         status = "okay";
 123
 124         ports {
 125                 port@0 {
 126                         label = "lan4";
 127                 };
 128
 129                 port@1 {
 130                         label = "lan3";
 131                 };
 132
 133                 port@2 {
 134                         label = "lan2";
 135                 };
 136
 137                 port@3 {
 138                         label = "lan1";
 139                 };
 140
 141                 port@4 {
 142                         label = "wan";
 143                         nvmem-cells = <&et0macaddr 5>;
 144                         nvmem-cell-names = "mac-address";
 145                 };
 146
 147                 port@5 {
 148                         label = "cpu";
 149                 };
 150
 151                 port@7 {
 152                         status = "disabled";
 153                 };
 154
 155                 port@8 {
 156                         status = "disabled";
 157                 };
 158         };
 159 };