src/arm/intel/ixp/intel-ixp4xx-reference-design.dtsi

   1 // SPDX-License-Identifier: ISC
   2 /*
   3  * Device Tree include file for Intel reference designs for the
   4  * XScale Network Processors in the IXP 4xx series. Common device
   5  * set-up for IXDP425, IXCDP1100, KIXRP435 and IXDP465.
   6  */
   7
   8 / {
   9         memory@0 {
  10                 /*
  11                  * The board supports up to 256 MB of memory. Here we put in
  12                  * 64 MB and this may be modified by the boot loader.
  13                  */
  14                 device_type = "memory";
  15                 reg = <0x00000000 0x4000000>;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200n8";
  20                 stdout-path = "uart0:115200n8";
  21         };
  22
  23         aliases {
  24                 serial0 = &uart0;
  25         };
  26
  27         i2c {
  28                 compatible = "i2c-gpio";
  29                 sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
  30                 scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
  31                 #address-cells = <1>;
  32                 #size-cells = <0>;
  33
  34                 eeprom@50 {
  35                         /*
  36                          * Philips PCF8582C-2T/03 512byte I2C EEPROM
  37                          * should behave like an Atmel 24c04.
  38                          */
  39                         compatible = "atmel,24c04";
  40                         reg = <0x50>;
  41                         pagesize = <16>;
  42                         size = <512>;
  43                         read-only;
  44                 };
  45         };
  46
  47         soc {
  48                 bus@c4000000 {
  49                         /* Flash memory defined per-variant */
  50                         nand-controller@3,0 {
  51                                 /* Some designs have a NAND on CS3 enable it here if present */
  52                                 status = "disabled";
  53
  54                                 /*
  55                                  * gen_nand needs to be extended and documented to get
  56                                  * command byte = 1 and address byte = 2 from the device
  57                                  * tree.
  58                                  */
  59                                 compatible = "gen_nand";
  60
  61                                 /* Expansion bus set-up */
  62                                 intel,ixp4xx-eb-t1 = <0>;
  63                                 intel,ixp4xx-eb-t2 = <0>;
  64                                 intel,ixp4xx-eb-t3 = <1>; // 1 cycle extra strobe phase
  65                                 intel,ixp4xx-eb-t4 = <0>;
  66                                 intel,ixp4xx-eb-t5 = <0>;
  67                                 intel,ixp4xx-eb-cycle-type = <0>; // Intel cycle type
  68                                 intel,ixp4xx-eb-byte-access-on-halfword = <0>;
  69                                 intel,ixp4xx-eb-mux-address-and-data = <0>;
  70                                 intel,ixp4xx-eb-ahb-split-transfers = <0>;
  71                                 intel,ixp4xx-eb-write-enable = <1>;
  72                                 intel,ixp4xx-eb-byte-access = <1>;
  73
  74                                 /* 512 bytes memory window */
  75                                 reg = <3 0x00000000 0x200>;
  76                                 nand-on-flash-bbt;
  77                                 nand-ecc-mode = "soft_bch";
  78                                 nand-ecc-step-size = <512>;
  79                                 nand-ecc-strength = <4>;
  80                                 nce-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* NCE */
  81
  82                                 label = "ixp400 NAND";
  83
  84                                 partitions {
  85                                         compatible = "fixed-partitions";
  86                                         #address-cells = <1>;
  87                                         #size-cells = <1>;
  88
  89                                         fs@0 {
  90                                                 label = "ixp400 NAND FS 0";
  91                                                 reg = <0x0 0x800000>;
  92                                         };
  93                                         fs@800000 {
  94                                                 label = "ixp400 NAND FS 1";
  95                                                 reg = <0x800000 0x0>;
  96                                         };
  97                                 };
  98                         };
  99                 };
 100
 101                 pci@c0000000 {
 102                         status = "okay";
 103
 104                         /*
 105                          * Taken from IXDP425 PCI boardfile.
 106                          * PCI slots on the BIXMB425BD base card.
 107                          * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
 108                          */
 109                         #interrupt-cells = <1>;
 110                         interrupt-map-mask = <0xf800 0 0 7>;
 111                         interrupt-map =
 112                         /* IDSEL 1 */
 113                         <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
 114                         <0x0800 0 0 2 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 1 is irq 10 */
 115                         <0x0800 0 0 3 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 1 is irq 9 */
 116                         <0x0800 0 0 4 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 1 is irq 8 */
 117                         /* IDSEL 2 */
 118                         <0x1000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 2 is irq 10 */
 119                         <0x1000 0 0 2 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 2 is irq 9 */
 120                         <0x1000 0 0 3 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 2 is irq 8 */
 121                         <0x1000 0 0 4 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 2 is irq 11 */
 122                         /* IDSEL 3 */
 123                         <0x1800 0 0 1 &gpio0 9  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 3 is irq 9 */
 124                         <0x1800 0 0 2 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 3 is irq 8 */
 125                         <0x1800 0 0 3 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 3 is irq 11 */
 126                         <0x1800 0 0 4 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 3 is irq 10 */
 127                         /* IDSEL 4 */
 128                         <0x2000 0 0 1 &gpio0 8  IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 4 is irq 8 */
 129                         <0x2000 0 0 2 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 4 is irq 11 */
 130                         <0x2000 0 0 3 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 4 is irq 10 */
 131                         <0x2000 0 0 4 &gpio0 9  IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 4 is irq 9 */
 132                 };
 133         };
 134 };