1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * Device Tree file for Marvell Armada 388 evaluation board
6 * Copyright (C) 2014 Marvell
8 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
12 #include "armada-388.dtsi"
15 model = "Marvell Armada 385 Development Board";
16 compatible = "marvell,a385-db", "marvell,armada388",
17 "marvell,armada385", "marvell,armada380";
20 stdout-path = "serial0:115200n8";
24 device_type = "memory";
25 reg = <0x00000000 0x10000000>; /* 256 MB */
29 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
30 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
31 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
32 MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
33 MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
38 clock-frequency = <100000>;
39 audio_codec: audio-codec@4a {
40 #sound-dai-cells = <0>;
41 compatible = "cirrus,cs42l51";
48 clock-frequency = <100000>;
58 phy-mode = "rgmii-id";
59 buffer-manager = <&bm>;
71 phy-mode = "rgmii-id";
72 buffer-manager = <&bm>;
78 phy0: ethernet-phy@0 {
82 phy1: ethernet-phy@1 {
107 audio-controller@e8000 {
108 pinctrl-0 = <&i2s_pins>;
109 pinctrl-names = "default";
129 * The two PCIe units are accessible through
130 * standard PCIe slots on the board.
144 compatible = "simple-audio-card";
145 simple-audio-card,name = "Armada 385 DB Audio";
146 simple-audio-card,mclk-fs = <256>;
147 simple-audio-card,widgets =
148 "Headphone", "Out Jack",
150 simple-audio-card,routing =
157 simple-audio-card,dai-link@0 {
160 sound-dai = <&audio_controller 0>;
164 sound-dai = <&audio_codec>;
168 simple-audio-card,dai-link@1 {
171 sound-dai = <&audio_controller 1>;
175 sound-dai = <&spdif_out>;
179 simple-audio-card,dai-link@2 {
182 sound-dai = <&audio_controller 1>;
186 sound-dai = <&spdif_in>;
191 spdif_out: spdif-out {
192 #sound-dai-cells = <0>;
193 compatible = "linux,spdif-dit";
197 #sound-dai-cells = <0>;
198 compatible = "linux,spdif-dir";
206 #address-cells = <1>;
208 compatible = "w25q32", "jedec,spi-nor";
209 reg = <0>; /* Chip select 0 */
210 spi-max-frequency = <108000000>;
219 label = "pxa3xx_nand-0";
221 marvell,nand-keep-config;
223 nand-ecc-strength = <4>;
224 nand-ecc-step-size = <512>;
227 compatible = "fixed-partitions";
228 #address-cells = <1>;
237 reg = <0x800000 0x800000>;
240 label = "Filesystem";
241 reg = <0x1000000 0x3f000000>;