src/arm/nxp/imx/imx50-evk.dts

   1 // SPDX-License-Identifier: GPL-2.0+
   2 //
   3 // Copyright 2013 Greg Ungerer <gerg@uclinux.org>
   4 // Copyright 2011 Freescale Semiconductor, Inc.
   5 // Copyright 2011 Linaro Ltd.
   6
   7 /dts-v1/;
   8 #include "imx50.dtsi"
   9
  10 / {
  11         model = "Freescale i.MX50 Evaluation Kit";
  12         compatible = "fsl,imx50-evk", "fsl,imx50";
  13
  14         memory@70000000 {
  15                 device_type = "memory";
  16                 reg = <0x70000000 0x80000000>;
  17         };
  18 };
  19
  20 &cspi {
  21         pinctrl-names = "default";
  22         pinctrl-0 = <&pinctrl_cspi>;
  23         cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>;
  24         status = "okay";
  25
  26         flash: flash@1 {
  27                 #address-cells = <1>;
  28                 #size-cells = <1>;
  29                 compatible = "m25p32", "jedec,spi-nor";
  30                 spi-max-frequency = <25000000>;
  31                 reg = <1>;
  32
  33                 partition@0 {
  34                         label = "bootloader";
  35                         reg = <0x0 0x100000>;
  36                         read-only;
  37                 };
  38
  39                 partition@100000 {
  40                         label = "kernel";
  41                         reg = <0x100000 0x300000>;
  42                 };
  43         };
  44 };
  45
  46 &fec {
  47         pinctrl-names = "default";
  48         pinctrl-0 = <&pinctrl_fec>;
  49         phy-mode = "rmii";
  50         phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
  51         status = "okay";
  52 };
  53
  54 &iomuxc {
  55         imx50-evk {
  56                 pinctrl_cspi: cspigrp {
  57                         fsl,pins = <
  58                                 MX50_PAD_CSPI_SCLK__CSPI_SCLK           0x00
  59                                 MX50_PAD_CSPI_MISO__CSPI_MISO           0x00
  60                                 MX50_PAD_CSPI_MOSI__CSPI_MOSI           0x00
  61                                 MX50_PAD_CSPI_SS0__GPIO4_11             0xc4
  62                                 MX50_PAD_ECSPI1_MOSI__GPIO4_13          0x84
  63                         >;
  64                 };
  65
  66                 pinctrl_fec: fecgrp {
  67                         fsl,pins = <
  68                                 MX50_PAD_SSI_RXFS__FEC_MDC              0x80
  69                                 MX50_PAD_SSI_RXC__FEC_MDIO              0x80
  70                                 MX50_PAD_DISP_D0__FEC_TX_CLK            0x80
  71                                 MX50_PAD_DISP_D1__FEC_RX_ERR            0x80
  72                                 MX50_PAD_DISP_D2__FEC_RX_DV             0x80
  73                                 MX50_PAD_DISP_D3__FEC_RDATA_1           0x80
  74                                 MX50_PAD_DISP_D4__FEC_RDATA_0           0x80
  75                                 MX50_PAD_DISP_D5__FEC_TX_EN             0x80
  76                                 MX50_PAD_DISP_D6__FEC_TDATA_1           0x80
  77                                 MX50_PAD_DISP_D7__FEC_TDATA_0           0x80
  78                         >;
  79                 };
  80
  81                 pinctrl_uart1: uart1grp {
  82                         fsl,pins = <
  83                                 MX50_PAD_UART1_TXD__UART1_TXD_MUX       0x1e4
  84                                 MX50_PAD_UART1_RXD__UART1_RXD_MUX       0x1e4
  85                                 MX50_PAD_UART1_RTS__UART1_RTS           0x1e4
  86                                 MX50_PAD_UART1_CTS__UART1_CTS           0x1e4
  87                         >;
  88                 };
  89         };
  90 };
  91
  92 &uart1 {
  93         pinctrl-names = "default";
  94         pinctrl-0 = <&pinctrl_uart1>;
  95         status = "okay";
  96 };
  97
  98 &usbh1 {
  99         status = "okay";
 100 };
 101
 102 &usbotg {
 103         status = "okay";
 104 };