src/arm/nxp/imx/imx6dl-prtrvt.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /*
   3  * Copyright (c) 2014 Protonic Holland
   4  */
   5
   6 /dts-v1/;
   7 #include "imx6dl.dtsi"
   8 #include "imx6qdl-prti6q.dtsi"
   9 #include <dt-bindings/leds/common.h>
  10
  11 / {
  12         model = "Protonic RVT board";
  13         compatible = "prt,prtrvt", "fsl,imx6dl";
  14
  15         memory@10000000 {
  16                 device_type = "memory";
  17                 reg = <0x10000000 0x10000000>;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22                 pinctrl-names = "default";
  23                 pinctrl-0 = <&pinctrl_leds>;
  24
  25                 led-debug0 {
  26                         function = LED_FUNCTION_STATUS;
  27                         gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
  28                         linux,default-trigger = "heartbeat";
  29                 };
  30         };
  31 };
  32
  33 &can1 {
  34         pinctrl-names = "default";
  35         pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
  36         status = "okay";
  37 };
  38
  39 &ecspi1 {
  40         cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
  41         pinctrl-names = "default";
  42         pinctrl-0 = <&pinctrl_ecspi1>;
  43         status = "okay";
  44
  45         flash@0 {
  46                 compatible = "jedec,spi-nor";
  47                 reg = <0>;
  48                 spi-max-frequency = <20000000>;
  49                 #address-cells = <1>;
  50                 #size-cells = <1>;
  51         };
  52 };
  53
  54 &ecspi3 {
  55         cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
  56         pinctrl-names = "default";
  57         pinctrl-0 = <&pinctrl_ecspi3>;
  58         status = "okay";
  59
  60         nfc@0 {
  61                 compatible = "ti,trf7970a";
  62                 reg = <0>;
  63                 pinctrl-names = "default";
  64                 pinctrl-0 = <&pinctrl_nfc>;
  65                 spi-max-frequency = <2000000>;
  66                 interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>;
  67                 ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
  68                                   <&gpio5 11 GPIO_ACTIVE_LOW>;
  69                 vin-supply = <&reg_3v3>;
  70                 autosuspend-delay = <30000>;
  71                 irq-status-read-quirk;
  72                 en2-rf-quirk;
  73                 status = "okay";
  74         };
  75 };
  76
  77 &i2c3 {
  78         adc@49 {
  79                 compatible = "ti,ads1015";
  80                 reg = <0x49>;
  81                 #address-cells = <1>;
  82                 #size-cells = <0>;
  83
  84                 /* nc */
  85                 channel@4 {
  86                         reg = <4>;
  87                         ti,gain = <3>;
  88                         ti,datarate = <3>;
  89                 };
  90
  91                 /* nc */
  92                 channel@5 {
  93                         reg = <5>;
  94                         ti,gain = <3>;
  95                         ti,datarate = <3>;
  96                 };
  97
  98                 /* can1_l */
  99                 channel@6 {
 100                         reg = <6>;
 101                         ti,gain = <3>;
 102                         ti,datarate = <3>;
 103                 };
 104
 105                 /* can1_h */
 106                 channel@7 {
 107                         reg = <7>;
 108                         ti,gain = <3>;
 109                         ti,datarate = <3>;
 110                 };
 111         };
 112
 113         rtc@51 {
 114                 compatible = "nxp,pcf8563";
 115                 reg = <0x51>;
 116         };
 117 };
 118
 119 &pcie {
 120         status = "okay";
 121 };
 122
 123 &usbh1 {
 124         status = "disabled";
 125 };
 126
 127 &usbotg {
 128         disable-over-current;
 129 };
 130
 131 &vpu {
 132         status = "disabled";
 133 };
 134
 135 &iomuxc {
 136         pinctrl_can1phy: can1phy {
 137                 fsl,pins = <
 138                         /* CAN1_SR */
 139                         MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
 140                         /* CAN1_TERM */
 141                         MX6QDL_PAD_GPIO_0__GPIO1_IO00   0x1b0b0
 142                 >;
 143         };
 144
 145         pinctrl_ecspi1: ecspi1grp {
 146                 fsl,pins = <
 147                         MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
 148                         MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
 149                         MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
 150                         /* CS */
 151                         MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x000b1
 152                 >;
 153         };
 154
 155         pinctrl_ecspi3: ecspi3grp {
 156                 fsl,pins = <
 157                         MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK      0x100b1
 158                         MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI      0x100b1
 159                         MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO      0x100b1
 160                         MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24       0x000b1
 161                 >;
 162         };
 163
 164         pinctrl_leds: ledsgrp {
 165                 fsl,pins = <
 166                         MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x1b0b0
 167                 >;
 168         };
 169
 170         pinctrl_nfc: nfcgrp {
 171                 fsl,pins = <
 172                         /* NFC_ASK_OOK */
 173                         MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09      0x100b1
 174                         /* NFC_PWR_EN */
 175                         MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10      0x100b1
 176                         /* NFC_EN2 */
 177                         MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11      0x100b1
 178                         /* NFC_EN */
 179                         MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12      0x100b1
 180                         /* NFC_MOD */
 181                         MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13      0x100b1
 182                         /* NFC_IRQ */
 183                         MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14      0x100b1
 184                 >;
 185         };
 186 };