src/arm/nxp/imx/imx6q-prti6q.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /*
   3  * Copyright (c) 2014 Protonic Holland
   4  */
   5
   6 /dts-v1/;
   7 #include "imx6q.dtsi"
   8 #include "imx6qdl-prti6q.dtsi"
   9 #include <dt-bindings/leds/common.h>
  10 #include <dt-bindings/sound/fsl-imx-audmux.h>
  11
  12 / {
  13         model = "Protonic PRTI6Q board";
  14         compatible = "prt,prti6q", "fsl,imx6q";
  15
  16         memory@10000000 {
  17                 device_type = "memory";
  18                 reg = <0x10000000 0xf0000000>;
  19         };
  20
  21         backlight_lcd: backlight-lcd {
  22                 compatible = "pwm-backlight";
  23                 pinctrl-names = "default";
  24                 pinctrl-0 = <&pinctrl_backlight>;
  25                 pwms = <&pwm1 0 5000000>;
  26                 brightness-levels = <0 16 64 255>;
  27                 num-interpolated-steps = <16>;
  28                 default-brightness-level = <1>;
  29                 power-supply = <&reg_3v3>;
  30                 enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
  31         };
  32
  33         can_osc: can-osc {
  34                 compatible = "fixed-clock";
  35                 #clock-cells = <0>;
  36                 clock-frequency = <25000000>;
  37         };
  38
  39         leds {
  40                 compatible = "gpio-leds";
  41                 pinctrl-names = "default";
  42                 pinctrl-0 = <&pinctrl_leds>;
  43
  44                 led-debug0 {
  45                         function = LED_FUNCTION_STATUS;
  46                         gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
  47                         linux,default-trigger = "heartbeat";
  48                 };
  49
  50                 led-debug1 {
  51                         function = LED_FUNCTION_SD;
  52                         gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
  53                         linux,default-trigger = "disk-activity";
  54                 };
  55         };
  56
  57         panel {
  58                 compatible = "kyo,tcg121xglp";
  59                 backlight = <&backlight_lcd>;
  60
  61                 port {
  62                         panel_in: endpoint {
  63                                 remote-endpoint = <&lvds0_out>;
  64                         };
  65                 };
  66         };
  67
  68         reg_1v8: regulator-1v8 {
  69                 compatible = "regulator-fixed";
  70                 regulator-name = "1v8";
  71                 regulator-min-microvolt = <1800000>;
  72                 regulator-max-microvolt = <1800000>;
  73         };
  74
  75         reg_wifi: regulator-wifi {
  76                 compatible = "regulator-fixed";
  77                 pinctrl-names = "default";
  78                 pinctrl-0 = <&pinctrl_wifi_npd>;
  79                 enable-active-high;
  80                 gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
  81                 regulator-max-microvolt = <1800000>;
  82                 regulator-min-microvolt = <1800000>;
  83                 regulator-name = "regulator-WL12xx";
  84                 startup-delay-us = <70000>;
  85         };
  86
  87         sound {
  88                 compatible = "simple-audio-card";
  89                 simple-audio-card,name = "prti6q-sgtl5000";
  90                 simple-audio-card,format = "i2s";
  91                 simple-audio-card,widgets =
  92                         "Microphone", "Microphone Jack",
  93                         "Line", "Line In Jack",
  94                         "Headphone", "Headphone Jack",
  95                         "Speaker", "External Speaker";
  96                 simple-audio-card,routing =
  97                         "MIC_IN", "Microphone Jack",
  98                         "LINE_IN", "Line In Jack",
  99                         "Headphone Jack", "HP_OUT",
 100                         "External Speaker", "LINE_OUT";
 101
 102                 simple-audio-card,cpu {
 103                         sound-dai = <&ssi1>;
 104                         system-clock-frequency = <0>;
 105                 };
 106
 107                 simple-audio-card,codec {
 108                         sound-dai = <&sgtl5000>;
 109                         bitclock-master;
 110                         frame-master;
 111                 };
 112         };
 113
 114         sound-spdif {
 115                 compatible = "fsl,imx-audio-spdif";
 116                 model = "imx-spdif";
 117                 spdif-controller = <&spdif>;
 118                 spdif-in;
 119                 spdif-out;
 120         };
 121 };
 122
 123 &audmux {
 124         pinctrl-names = "default";
 125         pinctrl-0 = <&pinctrl_audmux>;
 126         status = "okay";
 127
 128         mux-ssi1 {
 129                 fsl,audmux-port = <0>;
 130                 fsl,port-config = <
 131                         IMX_AUDMUX_V2_PTCR_SYN          0
 132                         IMX_AUDMUX_V2_PTCR_TFSEL(2)     0
 133                         IMX_AUDMUX_V2_PTCR_TCSEL(2)     0
 134                         IMX_AUDMUX_V2_PTCR_TFSDIR       0
 135                         IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
 136                 >;
 137         };
 138
 139         mux-pins3 {
 140                 fsl,audmux-port = <2>;
 141                 fsl,port-config = <
 142                         IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
 143                         0                      IMX_AUDMUX_V2_PDCR_TXRXEN
 144                 >;
 145         };
 146 };
 147
 148 &can1 {
 149         pinctrl-names = "default";
 150         pinctrl-0 = <&pinctrl_can1>;
 151         status = "okay";
 152 };
 153
 154 &can2 {
 155         pinctrl-names = "default";
 156         pinctrl-0 = <&pinctrl_can2>;
 157         status = "okay";
 158 };
 159
 160 &ecspi1 {
 161         cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 162         pinctrl-names = "default";
 163         pinctrl-0 = <&pinctrl_ecspi1>;
 164         status = "okay";
 165
 166         flash@0 {
 167                 compatible = "jedec,spi-nor";
 168                 reg = <0>;
 169                 spi-max-frequency = <20000000>;
 170         };
 171 };
 172
 173 &ecspi2 {
 174         cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>;
 175         pinctrl-names = "default";
 176         pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
 177         status = "okay";
 178
 179         can@0 {
 180                 compatible = "microchip,mcp2515";
 181                 reg = <0>;
 182                 pinctrl-names = "default";
 183                 pinctrl-0 = <&pinctrl_can3>;
 184                 clocks = <&can_osc>;
 185                 interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
 186                 spi-max-frequency = <5000000>;
 187         };
 188
 189         adc@1 {
 190                 compatible = "ti,adc128s052";
 191                 reg = <1>;
 192                 spi-max-frequency = <2000000>;
 193                 vref-supply = <&reg_3v3>;
 194         };
 195 };
 196
 197 &ecspi3 {
 198         cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 199         pinctrl-names = "default";
 200         pinctrl-0 = <&pinctrl_ecspi3>;
 201         status = "okay";
 202 };
 203
 204 &fec {
 205         pinctrl-names = "default";
 206         pinctrl-0 = <&pinctrl_enet>;
 207         phy-mode = "rgmii-id";
 208         phy-handle = <&rgmii_phy>;
 209         status = "okay";
 210
 211         mdio {
 212                 #address-cells = <1>;
 213                 #size-cells = <0>;
 214
 215                 /* Microchip KSZ9031RNX PHY */
 216                 rgmii_phy: ethernet-phy@0 {
 217                         reg = <0>;
 218                         interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
 219                         reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 220                         reset-assert-us = <10000>;
 221                         reset-deassert-us = <300>;
 222                 };
 223         };
 224 };
 225
 226 &hdmi {
 227         pinctrl-names = "default";
 228         pinctrl-0 = <&pinctrl_hdmi>;
 229         ddc-i2c-bus = <&i2c2>;
 230         status = "okay";
 231 };
 232
 233 &i2c1 {
 234         sgtl5000: audio-codec@a {
 235                 compatible = "fsl,sgtl5000";
 236                 reg = <0xa>;
 237                 #sound-dai-cells = <0>;
 238                 clocks = <&clks 201>;
 239                 VDDA-supply = <&reg_3v3>;
 240                 VDDIO-supply = <&reg_3v3>;
 241                 VDDD-supply = <&reg_1v8>;
 242         };
 243 };
 244
 245 /* DDC */
 246 &i2c2 {
 247         clock-frequency = <100000>;
 248         pinctrl-names = "default";
 249         pinctrl-0 = <&pinctrl_i2c2>;
 250         status = "okay";
 251 };
 252
 253 &i2c3 {
 254         adc@49 {
 255                 compatible = "ti,ads1015";
 256                 reg = <0x49>;
 257                 #address-cells = <1>;
 258                 #size-cells = <0>;
 259
 260                 /* can2_l */
 261                 channel@4 {
 262                         reg = <4>;
 263                         ti,gain = <3>;
 264                         ti,datarate = <3>;
 265                 };
 266
 267                 /* can2_h */
 268                 channel@5 {
 269                         reg = <5>;
 270                         ti,gain = <3>;
 271                         ti,datarate = <3>;
 272                 };
 273
 274                 /* can1_l */
 275                 channel@6 {
 276                         reg = <6>;
 277                         ti,gain = <3>;
 278                         ti,datarate = <3>;
 279                 };
 280
 281                 /* can1_h */
 282                 channel@7 {
 283                         reg = <7>;
 284                         ti,gain = <3>;
 285                         ti,datarate = <3>;
 286                 };
 287         };
 288 };
 289
 290 &pcie {
 291         status = "okay";
 292 };
 293
 294 &pwm1 {
 295         #pwm-cells = <2>;
 296         pinctrl-names = "default";
 297         pinctrl-0 = <&pinctrl_pwm1>;
 298         status = "okay";
 299 };
 300
 301 &ldb {
 302         status = "okay";
 303
 304         lvds-channel@0 {
 305                 status = "okay";
 306
 307                 port@4 {
 308                         reg = <4>;
 309
 310                         lvds0_out: endpoint {
 311                                 remote-endpoint = <&panel_in>;
 312                         };
 313                 };
 314         };
 315 };
 316
 317 &sata {
 318         status = "okay";
 319 };
 320
 321 &snvs_poweroff {
 322         status = "okay";
 323 };
 324
 325 &spdif {
 326         pinctrl-names = "default";
 327         pinctrl-0 = <&pinctrl_spdif>;
 328         status = "okay";
 329 };
 330
 331 &ssi1 {
 332         #sound-dai-cells = <0>;
 333         fsl,mode = "ac97-slave";
 334         status = "okay";
 335 };
 336
 337 &uart2 {
 338         pinctrl-names = "default";
 339         pinctrl-0 = <&pinctrl_uart2>;
 340         status = "okay";
 341 };
 342
 343 &uart5 {
 344         pinctrl-names = "default";
 345         pinctrl-0 = <&pinctrl_uart5>;
 346         status = "okay";
 347 };
 348
 349 &usbotg {
 350         pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>;
 351 };
 352
 353 &usdhc2 {
 354         pinctrl-names = "default";
 355         pinctrl-0 = <&pinctrl_usdhc2>;
 356         non-removable;
 357         vmmc-supply = <&reg_wifi>;
 358         cap-power-off-card;
 359         keep-power-in-suspend;
 360         status = "okay";
 361
 362         #address-cells = <1>;
 363         #size-cells = <0>;
 364         wifi@2 {
 365                 compatible = "ti,wl1271";
 366                 reg = <2>;
 367                 pinctrl-names = "default";
 368                 pinctrl-0 = <&pinctrl_wifi>;
 369                 interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
 370                 ref-clock-frequency = <38400000>;
 371                 tcxo-clock-frequency = <19200000>;
 372         };
 373 };
 374
 375 &iomuxc {
 376         pinctrl_audmux: audmuxgrp {
 377                 fsl,pins = <
 378                         MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1         0x030b0
 379                         MX6QDL_PAD_CSI0_DAT7__AUD3_RXD          0x130b0
 380                         MX6QDL_PAD_CSI0_DAT4__AUD3_TXC          0x130b0
 381                         MX6QDL_PAD_CSI0_DAT5__AUD3_TXD          0x110b0
 382                         MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS         0x130b0
 383                 >;
 384         };
 385
 386         pinctrl_backlight: backlightgrp {
 387                 fsl,pins = <
 388                         MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28       0x1b0b0
 389                 >;
 390         };
 391
 392         pinctrl_can2: can2grp {
 393                 fsl,pins = <
 394                         MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX        0x1b008
 395                         MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX        0x1b008
 396                 >;
 397         };
 398
 399         pinctrl_can3: can3grp {
 400                 fsl,pins = <
 401                         MX6QDL_PAD_EIM_D20__GPIO3_IO20          0x1b0b1
 402                 >;
 403         };
 404
 405         pinctrl_ecspi1: ecspi1grp {
 406                 fsl,pins = <
 407                         MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
 408                         MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
 409                         MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
 410                         /* CS */
 411                         MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x000b1
 412                 >;
 413         };
 414
 415         pinctrl_ecspi2: ecspi2grp {
 416                 fsl,pins = <
 417                         MX6QDL_PAD_EIM_OE__ECSPI2_MISO          0x100b1
 418                         MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK         0x100b1
 419                         MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI         0x100b1
 420                         MX6QDL_PAD_EIM_RW__GPIO2_IO26           0x000b1
 421                 >;
 422         };
 423
 424         pinctrl_ecspi2_cs: ecspi2csgrp {
 425                 fsl,pins = <
 426                         /* ADC128S022 CS */
 427                         MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25       0x1b0b1
 428                 >;
 429         };
 430
 431         pinctrl_ecspi3: ecspi3grp {
 432                 fsl,pins = <
 433                         MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK      0x100b1
 434                         MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI      0x100b1
 435                         MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO      0x100b1
 436                         MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24       0x000b1
 437                 >;
 438         };
 439
 440         pinctrl_enet: enetgrp {
 441                 fsl,pins = <
 442                         MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 443                         MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 444                         MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 445                         MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 446                         MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 447                         MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 448                         MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x10030
 449                         MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x10030
 450                         MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x10030
 451                         MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x10030
 452                         MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x10030
 453                         MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x10030
 454                         MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x10030
 455                         MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x10030
 456                         MX6QDL_PAD_ENET_MDC__ENET_MDC           0x10030
 457
 458                         /* Phy reset */
 459                         MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25      0x1b0b0
 460                         MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28       0x1b0b1
 461                 >;
 462         };
 463
 464         pinctrl_hdmi: hdmigrp {
 465                 fsl,pins = <
 466                         /* NOTE: DDC is done via I2C2, so DON'T
 467                          * configure DDC pins for HDMI!
 468                          */
 469                         MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE    0x1f8b0
 470                 >;
 471         };
 472
 473         /* DDC */
 474         pinctrl_i2c2: i2c2grp {
 475                 fsl,pins = <
 476                         MX6QDL_PAD_KEY_COL3__I2C2_SCL   0x4001b8b1
 477                         MX6QDL_PAD_KEY_ROW3__I2C2_SDA   0x4001b8b1
 478                 >;
 479         };
 480
 481         pinctrl_leds: ledsgrp {
 482                 fsl,pins = <
 483                         MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x1b0b0
 484                         MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x1b0b0
 485                 >;
 486         };
 487
 488         pinctrl_pwm1: pwm1grp {
 489                 fsl,pins = <
 490                         MX6QDL_PAD_DISP0_DAT8__PWM1_OUT         0x1b0b0
 491                 >;
 492         };
 493
 494         pinctrl_spdif: spdifgrp {
 495                 fsl,pins = <
 496                         MX6QDL_PAD_GPIO_16__SPDIF_IN            0x1b0b0
 497                         MX6QDL_PAD_GPIO_19__SPDIF_OUT           0x1b0b0
 498                 >;
 499         };
 500
 501         pinctrl_uart2: uart2grp {
 502                 fsl,pins = <
 503                         MX6QDL_PAD_EIM_D26__UART2_RX_DATA       0x1b0b1
 504                         MX6QDL_PAD_EIM_D27__UART2_TX_DATA       0x1b0b1
 505                         MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B     0x1b0b1
 506                         MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B     0x1b0b1
 507                 >;
 508         };
 509
 510         pinctrl_uart5: uart5grp {
 511                 fsl,pins = <
 512                         MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
 513                         MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
 514                 >;
 515         };
 516
 517         pinctrl_usbotg_id: usbotgidgrp {
 518                 fsl,pins = <
 519                         MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID       0x1f058
 520                 >;
 521         };
 522
 523         pinctrl_usdhc2: usdhc2grp {
 524                 fsl,pins = <
 525                         MX6QDL_PAD_SD2_CMD__SD2_CMD             0x170b9
 526                         MX6QDL_PAD_SD2_CLK__SD2_CLK             0x100b9
 527                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x170b9
 528                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x170b9
 529                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x170b9
 530                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x170b9
 531                 >;
 532         };
 533
 534         pinctrl_wifi: wifigrp {
 535                 fsl,pins = <
 536                         /* WL12xx IRQ */
 537                         MX6QDL_PAD_ENET_TXD0__GPIO1_IO30        0x10880
 538                 >;
 539         };
 540
 541         pinctrl_wifi_npd: wifinpd {
 542                 fsl,pins = <
 543                         MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b8b0
 544                 >;
 545         };
 546 };