src/arm/nxp/imx/imx6ul-phytec-segin.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2016 PHYTEC Messtechnik GmbH
   4  * Author: Christian Hemp <c.hemp@phytec.de>
   5  */
   6
   7 / {
   8         model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite";
   9         compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
  10
  11         aliases {
  12                 rtc0 = &i2c_rtc;
  13                 rtc1 = &snvs_rtc;
  14         };
  15
  16         reg_sound_1v8: regulator-1v8 {
  17                 compatible = "regulator-fixed";
  18                 regulator-name = "i2s-audio-1v8";
  19                 regulator-min-microvolt = <1800000>;
  20                 regulator-max-microvolt = <1800000>;
  21                 status = "disabled";
  22         };
  23
  24         reg_sound_3v3: regulator-3v3 {
  25                 compatible = "regulator-fixed";
  26                 regulator-name = "i2s-audio-3v3";
  27                 regulator-min-microvolt = <3300000>;
  28                 regulator-max-microvolt = <3300000>;
  29                 status = "disabled";
  30         };
  31
  32         reg_can1_en: regulator-can1 {
  33                 compatible = "regulator-fixed";
  34                 pinctrl-names = "default";
  35                 pinctrl-0 = <&princtrl_flexcan1_en>;
  36                 regulator-name = "Can";
  37                 regulator-min-microvolt = <3300000>;
  38                 regulator-max-microvolt = <3300000>;
  39                 gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
  40                 enable-active-high;
  41                 status = "disabled";
  42         };
  43
  44         reg_adc1_vref_3v3: regulator-vref-3v3 {
  45                 compatible = "regulator-fixed";
  46                 regulator-name = "vref-3v3";
  47                 regulator-min-microvolt = <3300000>;
  48                 regulator-max-microvolt = <3300000>;
  49         };
  50
  51         sound: sound {
  52                 compatible = "simple-audio-card";
  53                 simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007";
  54                 simple-audio-card,format = "i2s";
  55                 simple-audio-card,bitclock-master = <&dailink_master>;
  56                 simple-audio-card,frame-master = <&dailink_master>;
  57                 simple-audio-card,widgets =
  58                         "Line", "Line In",
  59                         "Line", "Line Out",
  60                         "Speaker", "Speaker";
  61                 simple-audio-card,routing =
  62                         "Line Out", "LLOUT",
  63                         "Line Out", "RLOUT",
  64                         "Speaker", "SPOP",
  65                         "Speaker", "SPOM",
  66                         "LINE1L", "Line In",
  67                         "LINE1R", "Line In";
  68                 status = "disabled";
  69
  70                 simple-audio-card,cpu {
  71                         sound-dai = <&sai2>;
  72                 };
  73
  74                 dailink_master: simple-audio-card,codec {
  75                         sound-dai = <&tlv320>;
  76                         clocks = <&clks IMX6UL_CLK_SAI2>;
  77                 };
  78         };
  79
  80 };
  81
  82 &adc1 {
  83         pinctrl-names = "default";
  84         pinctrl-0 = <&pinctrl_adc1>;
  85         vref-supply = <&reg_adc1_vref_3v3>;
  86         status = "disabled";
  87 };
  88
  89 &can1 {
  90         pinctrl-names = "default";
  91         pinctrl-0 = <&pinctrl_flexcan1>;
  92         xceiver-supply = <&reg_can1_en>;
  93         status = "disabled";
  94 };
  95
  96 &clks {
  97         assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
  98         assigned-clock-rates = <786432000>;
  99 };
 100
 101 &ecspi3 {
 102         pinctrl-names = "default";
 103         pinctrl-0 = <&pinctrl_ecspi3>;
 104         cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 105         status = "disabled";
 106 };
 107
 108 &fec2 {
 109         pinctrl-names = "default";
 110         pinctrl-0 = <&pinctrl_enet2>;
 111         phy-mode = "rmii";
 112         phy-handle = <&ethphy2>;
 113         status = "disabled";
 114 };
 115
 116 &i2c1 {
 117         tlv320: codec@18 {
 118                 compatible = "ti,tlv320aic3007";
 119                 #sound-dai-cells = <0>;
 120                 reg = <0x18>;
 121                 AVDD-supply = <&reg_sound_3v3>;
 122                 IOVDD-supply = <&reg_sound_3v3>;
 123                 DRVDD-supply = <&reg_sound_3v3>;
 124                 DVDD-supply = <&reg_sound_1v8>;
 125                 status = "disabled";
 126         };
 127
 128         i2c_rtc: rtc@68 {
 129                 pinctrl-names = "default";
 130                 pinctrl-0 = <&pinctrl_rtc_int>;
 131                 compatible = "microcrystal,rv4162";
 132                 reg = <0x68>;
 133                 interrupt-parent = <&gpio5>;
 134                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 135                 status = "disabled";
 136         };
 137 };
 138
 139 &mdio {
 140         ethphy2: ethernet-phy@2 {
 141                 reg = <2>;
 142                 micrel,led-mode = <1>;
 143                 clocks = <&clks IMX6UL_CLK_ENET2_REF>;
 144                 clock-names = "rmii-ref";
 145                 status = "disabled";
 146         };
 147 };
 148
 149 &sai2 {
 150         pinctrl-names = "default";
 151         pinctrl-0 = <&pinctrl_sai2>;
 152         assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
 153                         <&clks IMX6UL_CLK_SAI2>;
 154         assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
 155         assigned-clock-rates = <0>, <19200000>;
 156         fsl,sai-mclk-direction-output;
 157         status = "disabled";
 158 };
 159
 160 &uart5 {
 161         pinctrl-names = "default";
 162         pinctrl-0 = <&pinctrl_uart5>;
 163         uart-has-rtscts;
 164         status = "disabled";
 165 };
 166
 167 &usbotg1 {
 168         pinctrl-names = "default";
 169         pinctrl-0 = <&pinctrl_usb_otg1_id>;
 170         dr_mode = "otg";
 171         status = "disabled";
 172 };
 173
 174 &usbotg2 {
 175         dr_mode = "host";
 176         disable-over-current;
 177         status = "disabled";
 178 };
 179
 180 &usdhc1 {
 181         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 182         pinctrl-0 = <&pinctrl_usdhc1>;
 183         pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 184         pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 185         cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 186         no-1-8-v;
 187         keep-power-in-suspend;
 188         wakeup-source;
 189         disable-wp;
 190         status = "disabled";
 191 };
 192
 193 &iomuxc {
 194         pinctrl_adc1: adc1grp {
 195                 fsl,pins = <
 196                         MX6UL_PAD_GPIO1_IO03__GPIO1_IO03        0xb0
 197                 >;
 198         };
 199
 200         pinctrl_ecspi3: ecspi3grp {
 201                 fsl,pins = <
 202                         MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO      0x10b0
 203                         MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI      0x10b0
 204                         MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK    0x10b0
 205                         MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20     0x10b0
 206                 >;
 207         };
 208
 209         pinctrl_enet2: enet2grp {
 210                 fsl,pins = <
 211                         MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN      0x1b0b0
 212                         MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER      0x1b0b0
 213                         MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
 214                         MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
 215                         MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN      0x1b010
 216                         MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b010
 217                         MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b010
 218                         MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2  0x4001b010
 219                 >;
 220         };
 221
 222         pinctrl_flexcan1: flexcan1 {
 223                 fsl,pins = <
 224                         MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX      0x0b0b0
 225                         MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX      0x0b0b0
 226                 >;
 227         };
 228
 229         princtrl_flexcan1_en: flexcan1engrp {
 230                 fsl,pins = <
 231                         MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02      0x17059
 232                 >;
 233         };
 234
 235         pinctrl_rtc_int: rtcintgrp {
 236                 fsl,pins = <
 237                         MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01      0x17059
 238                 >;
 239         };
 240
 241         pinctrl_sai2: sai2grp {
 242                 fsl,pins = <
 243                         MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK        0x17088
 244                         MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC        0x17088
 245                         MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA     0x11088
 246                         MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA        0x11088
 247                         MX6UL_PAD_JTAG_TMS__SAI2_MCLK           0x17088
 248                 >;
 249         };
 250
 251         pinctrl_uart5: uart5grp {
 252                 fsl,pins = <
 253                         MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX   0x1b0b1
 254                         MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX   0x1b0b1
 255                         MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS     0x1b0b1
 256                         MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS     0x1b0b1
 257                 >;
 258         };
 259
 260         pinctrl_usb_otg1_id: usbotg1idgrp {
 261                 fsl,pins = <
 262                         MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID    0x17059
 263                 >;
 264         };
 265
 266         pinctrl_usdhc1: usdhc1grp {
 267                 fsl,pins = <
 268                         MX6UL_PAD_SD1_CMD__USDHC1_CMD           0x17059
 269                         MX6UL_PAD_SD1_CLK__USDHC1_CLK           0x10059
 270                         MX6UL_PAD_SD1_DATA0__USDHC1_DATA0       0x17059
 271                         MX6UL_PAD_SD1_DATA1__USDHC1_DATA1       0x17059
 272                         MX6UL_PAD_SD1_DATA2__USDHC1_DATA2       0x17059
 273                         MX6UL_PAD_SD1_DATA3__USDHC1_DATA3       0x17059
 274                         MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x17059
 275                 >;
 276         };
 277
 278         pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
 279                 fsl,pins = <
 280                         MX6UL_PAD_SD1_CMD__USDHC1_CMD           0x170b9
 281                         MX6UL_PAD_SD1_CLK__USDHC1_CLK           0x100b9
 282                         MX6UL_PAD_SD1_DATA0__USDHC1_DATA0       0x170b9
 283                         MX6UL_PAD_SD1_DATA1__USDHC1_DATA1       0x170b9
 284                         MX6UL_PAD_SD1_DATA2__USDHC1_DATA2       0x170b9
 285                         MX6UL_PAD_SD1_DATA3__USDHC1_DATA3       0x170b9
 286                 >;
 287         };
 288
 289         pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
 290                 fsl,pins = <
 291                         MX6UL_PAD_SD1_CMD__USDHC1_CMD           0x170f9
 292                         MX6UL_PAD_SD1_CLK__USDHC1_CLK           0x100f9
 293                         MX6UL_PAD_SD1_DATA0__USDHC1_DATA0       0x170f9
 294                         MX6UL_PAD_SD1_DATA1__USDHC1_DATA1       0x170f9
 295                         MX6UL_PAD_SD1_DATA2__USDHC1_DATA2       0x170f9
 296                         MX6UL_PAD_SD1_DATA3__USDHC1_DATA3       0x170f9
 297                 >;
 298         };
 299 };