src/arm/nxp/lpc/lpc4357-myd-lpc4357.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
   2 /*
   3  * MYIR Tech MYD-LPC4357 Development Board with 800x480 7" TFT panel
   4  *
   5  * Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
   6  */
   7
   8 /dts-v1/;
   9
  10 #include "lpc18xx.dtsi"
  11 #include "lpc4357.dtsi"
  12
  13 #include <dt-bindings/gpio/gpio.h>
  14
  15 / {
  16         model = "MYIR Tech LPC4357 Development Board";
  17         compatible = "myir,myd-lpc4357", "nxp,lpc4357";
  18
  19         chosen {
  20                 stdout-path = "serial3:115200n8";
  21         };
  22
  23         memory@28000000 {
  24                 device_type = "memory";
  25                 reg = <0x28000000 0x2000000>;
  26         };
  27
  28         leds {
  29                 compatible = "gpio-leds";
  30                 pinctrl-names = "default";
  31                 pinctrl-0 = <&led_pins>;
  32
  33                 led1 {
  34                         gpios = <&gpio LPC_GPIO(6,15) GPIO_ACTIVE_LOW>;
  35                         default-state = "off";
  36                 };
  37
  38                 led2 {
  39                         gpios = <&gpio LPC_GPIO(6,16) GPIO_ACTIVE_LOW>;
  40                         default-state = "off";
  41                 };
  42
  43                 led3 {
  44                         gpios = <&gpio LPC_GPIO(6,17) GPIO_ACTIVE_LOW>;
  45                         default-state = "off";
  46                 };
  47
  48                 led4 {
  49                         gpios = <&gpio LPC_GPIO(6,10) GPIO_ACTIVE_LOW>;
  50                         default-state = "off";
  51                 };
  52
  53                 led5 {
  54                         gpios = <&gpio LPC_GPIO(7,14) GPIO_ACTIVE_LOW>;
  55                         default-state = "off";
  56                 };
  57
  58                 led6 {
  59                         gpios = <&gpio LPC_GPIO(6,14) GPIO_ACTIVE_LOW>;
  60                         default-state = "off";
  61                 };
  62         };
  63
  64         panel: panel {
  65                 compatible = "innolux,at070tn92";
  66
  67                 port {
  68                         panel_input: endpoint {
  69                                 remote-endpoint = <&lcdc_output>;
  70                         };
  71                 };
  72         };
  73
  74         vcc: vcc_fixed {
  75                 compatible = "regulator-fixed";
  76                 regulator-name = "vcc-supply";
  77                 regulator-min-microvolt = <3300000>;
  78                 regulator-max-microvolt = <3300000>;
  79         };
  80
  81         vmmc: vmmc_fixed {
  82                 compatible = "regulator-fixed";
  83                 regulator-name = "vmmc-supply";
  84                 regulator-min-microvolt = <3300000>;
  85                 regulator-max-microvolt = <3300000>;
  86         };
  87 };
  88
  89 &pinctrl {
  90         can0_pins: can0-pins {
  91                 can_rd_cfg {
  92                         pins = "p3_1";
  93                         function = "can0";
  94                         input-enable;
  95                 };
  96
  97                 can_td_cfg {
  98                         pins = "p3_2";
  99                         function = "can0";
 100                 };
 101         };
 102
 103         can1_pins: can1-pins {
 104                 can_rd_cfg {
 105                         pins = "pe_1";
 106                         function = "can1";
 107                         input-enable;
 108                 };
 109
 110                 can_td_cfg {
 111                         pins = "pe_0";
 112                         function = "can1";
 113                 };
 114         };
 115
 116         emc_pins: emc-pins {
 117                 emc_addr0_22_cfg {
 118                         pins = "p2_9",  "p2_10", "p2_11", "p2_12",
 119                                "p2_13", "p1_0",  "p1_1",  "p1_2",
 120                                "p2_8",  "p2_7",  "p2_6",  "p2_2",
 121                                "p2_1",  "p2_0",  "p6_8",  "p6_7",
 122                                "pd_16", "pd_15", "pe_0",  "pe_1",
 123                                "pe_2",  "pe_3",  "pe_4";
 124                         function = "emc";
 125                         slew-rate = <1>;
 126                         bias-disable;
 127                 };
 128
 129                 emc_data0_15_cfg {
 130                         pins = "p1_7",  "p1_8",  "p1_9",  "p1_10",
 131                                "p1_11", "p1_12", "p1_13", "p1_14",
 132                                "p5_4",  "p5_5",  "p5_6",  "p5_7",
 133                                "p5_0",  "p5_1",  "p5_2",  "p5_3";
 134                         function = "emc";
 135                         input-enable;
 136                         input-schmitt-disable;
 137                         slew-rate = <1>;
 138                         bias-disable;
 139                 };
 140
 141                 emc_we_oe_cfg {
 142                         pins = "p1_6", "p1_3";
 143                         function = "emc";
 144                         slew-rate = <1>;
 145                         bias-disable;
 146                 };
 147
 148                 emc_cs0_cfg {
 149                         pins = "p1_5";
 150                         function = "emc";
 151                         slew-rate = <1>;
 152                         bias-disable;
 153                 };
 154
 155                 emc_sdram_dqm0_1_cfg {
 156                         pins = "p6_12", "p6_10";
 157                         function = "emc";
 158                         slew-rate = <1>;
 159                         bias-disable;
 160                 };
 161
 162                 emc_sdram_ras_cas_cfg {
 163                         pins = "p6_5", "p6_4";
 164                         function = "emc";
 165                         slew-rate = <1>;
 166                         bias-disable;
 167                 };
 168
 169                 emc_sdram_dycs0_cfg {
 170                         pins = "p6_9";
 171                         function = "emc";
 172                         slew-rate = <1>;
 173                         bias-disable;
 174                 };
 175
 176                 emc_sdram_cke_cfg {
 177                         pins = "p6_11";
 178                         function = "emc";
 179                         slew-rate = <1>;
 180                         bias-disable;
 181                 };
 182
 183                 emc_sdram_clock_cfg {
 184                         pins = "clk0";
 185                         function = "emc";
 186                         input-enable;
 187                         input-schmitt-disable;
 188                         slew-rate = <1>;
 189                         bias-disable;
 190                 };
 191         };
 192
 193         enet_rmii_pins: enet-rmii-pins {
 194                 enet_rmii_rxd_cfg {
 195                         pins = "p1_15", "p0_0";
 196                         function = "enet";
 197                         input-enable;
 198                         input-schmitt-disable;
 199                         slew-rate = <1>;
 200                         bias-disable;
 201                 };
 202
 203                 enet_rmii_txd_cfg {
 204                         pins = "p1_18", "p1_20";
 205                         function = "enet";
 206                         slew-rate = <1>;
 207                         bias-disable;
 208                 };
 209
 210                 enet_rmii_rx_dv_cfg {
 211                         pins = "p1_16";
 212                         function = "enet";
 213                         input-enable;
 214                         input-schmitt-disable;
 215                         bias-disable;
 216                 };
 217
 218                 enet_mdio_cfg {
 219                         pins = "p1_17";
 220                         function = "enet";
 221                         input-enable;
 222                         input-schmitt-disable;
 223                         bias-disable;
 224                 };
 225
 226                 enet_mdc_cfg {
 227                         pins = "pc_1";
 228                         function = "enet";
 229                         slew-rate = <1>;
 230                         bias-disable;
 231                 };
 232
 233                 enet_rmii_tx_en_cfg {
 234                         pins = "p0_1";
 235                         function = "enet";
 236                         bias-disable;
 237                 };
 238
 239                 enet_ref_clk_cfg {
 240                         pins = "p1_19";
 241                         function = "enet";
 242                         slew-rate = <1>;
 243                         input-enable;
 244                         input-schmitt-disable;
 245                         bias-disable;
 246                 };
 247         };
 248
 249         i2c0_pins: i2c0-pins {
 250                 i2c0_pins_cfg {
 251                         pins = "i2c0_scl", "i2c0_sda";
 252                         function = "i2c0";
 253                         input-enable;
 254                 };
 255         };
 256
 257         i2c1_pins: i2c1-pins {
 258                 i2c1_pins_cfg {
 259                         pins = "pe_15", "pe_13";
 260                         function = "i2c1";
 261                         input-enable;
 262                 };
 263         };
 264
 265         lcd_pins: lcd-pins {
 266                 lcd_vd0_23_cfg {
 267                         pins = "p4_1", "p4_4", "p4_3",  "p4_2",
 268                                "p8_7", "p8_6", "p8_5",  "p8_4",
 269                                "p7_5", "p4_8", "p4_10", "p4_9",
 270                                "p8_3", "pb_6", "pb_5",  "pb_4",
 271                                "p7_4", "p7_3", "p7_2",  "p7_1",
 272                                "pb_3", "pb_2", "pb_1",  "pb_0";
 273                         function = "lcd";
 274                 };
 275
 276                 lcd_vsync_en_dclk_lp_pwr_cfg {
 277                         pins = "p4_5", "p4_6", "p4_7", "p7_6", "p7_7";
 278                         function = "lcd";
 279                 };
 280         };
 281
 282         led_pins: led-pins {
 283                 led_1_6_cfg {
 284                         pins = "pd_1", "pd_2", "pd_3", "pc_11", "pe_14", "pd_0";
 285                         function = "gpio";
 286                         bias-pull-down;
 287                 };
 288         };
 289
 290         sdmmc_pins: sdmmc-pins {
 291                 sdmmc_clk_cfg {
 292                         pins = "pc_0";
 293                         function = "sdmmc";
 294                         slew-rate = <1>;
 295                         bias-pull-down;
 296                 };
 297
 298                 sdmmc_cmd_dat0_3_cfg {
 299                         pins = "pc_4", "pc_5", "pc_6", "pc_7", "pc_10";
 300                         function = "sdmmc";
 301                         input-enable;
 302                         input-schmitt-disable;
 303                         slew-rate = <1>;
 304                         bias-disable;
 305                 };
 306
 307                 sdmmc_cd_cfg {
 308                         pins = "pc_8";
 309                         function = "sdmmc";
 310                         input-enable;
 311                         bias-pull-down;
 312                 };
 313         };
 314
 315         spifi_pins: spifi-pins {
 316                 spifi_sck_cfg {
 317                         pins = "p3_3";
 318                         function = "spifi";
 319                         input-enable;
 320                         input-schmitt-disable;
 321                         slew-rate = <1>;
 322                         bias-disable;
 323                 };
 324
 325                 spifi_mosi_miso_sio2_sio3_cfg {
 326                         pins = "p3_7", "p3_6", "p3_5", "p3_4";
 327                         function = "spifi";
 328                         input-enable;
 329                         input-schmitt-disable;
 330                         slew-rate = <1>;
 331                         bias-disable;
 332                 };
 333
 334                 spifi_cs_cfg {
 335                         pins = "p3_8";
 336                         function = "spifi";
 337                         bias-disable;
 338                 };
 339         };
 340
 341         ssp1_pins: ssp1-pins {
 342                 ssp1_sck_cfg {
 343                         pins = "pf_4";
 344                         function = "ssp1";
 345                         slew-rate = <1>;
 346                         bias-pull-down;
 347                 };
 348
 349                 ssp1_miso_cfg {
 350                         pins = "pf_6";
 351                         function = "ssp1";
 352                         input-enable;
 353                         input-schmitt-disable;
 354                         slew-rate = <1>;
 355                         bias-pull-down;
 356                 };
 357
 358                 ssp1_mosi_cfg {
 359                         pins = "pf_7";
 360                         function = "ssp1";
 361                         slew-rate = <1>;
 362                         bias-pull-down;
 363                 };
 364
 365                 ssp1_ssel_cfg {
 366                         pins = "pf_5";
 367                         function = "gpio";
 368                         bias-disable;
 369                 };
 370         };
 371
 372         uart0_pins: uart0-pins {
 373                 uart0_rxd_cfg {
 374                         pins = "pf_11";
 375                         function = "uart0";
 376                         input-enable;
 377                         input-schmitt-disable;
 378                         bias-disable;
 379                 };
 380
 381                 uart0_clk_dir_txd_cfg {
 382                         pins = "pf_8", "pf_9", "pf_10";
 383                         function = "uart0";
 384                         bias-pull-down;
 385                 };
 386         };
 387
 388         uart1_pins: uart1-pins {
 389                 uart1_rxd_cfg {
 390                         pins = "pc_14";
 391                         function = "uart1";
 392                         bias-disable;
 393                         input-enable;
 394                         input-schmitt-disable;
 395                 };
 396
 397                 uart1_dtr_txd_cfg {
 398                         pins = "pc_12", "pc_13";
 399                         function = "uart1";
 400                         bias-pull-down;
 401                 };
 402         };
 403
 404         uart2_pins: uart2-pins {
 405                 uart2_rxd_cfg {
 406                         pins = "pa_2";
 407                         function = "uart2";
 408                         bias-disable;
 409                         input-enable;
 410                         input-schmitt-disable;
 411                 };
 412
 413                 uart2_txd_cfg {
 414                         pins = "pa_1";
 415                         function = "uart2";
 416                         bias-pull-down;
 417                 };
 418         };
 419
 420         uart3_pins: uart3-pins {
 421                 uart3_rx_cfg {
 422                         pins = "p2_4";
 423                         function = "uart3";
 424                         bias-disable;
 425                         input-enable;
 426                         input-schmitt-disable;
 427                 };
 428
 429                 uart3_tx_cfg {
 430                         pins = "p2_3";
 431                         function = "uart3";
 432                         bias-pull-down;
 433                 };
 434         };
 435
 436         usb0_pins: usb0-pins {
 437                 usb0_pwr_enable_cfg {
 438                         pins = "p6_3";
 439                         function = "usb0";
 440                 };
 441
 442                 usb0_pwr_fault_cfg {
 443                         pins = "p8_0";
 444                         function = "usb0";
 445                         bias-disable;
 446                         input-enable;
 447                 };
 448         };
 449 };
 450
 451 &adc1 {
 452         status = "okay";
 453         vref-supply = <&vcc>;
 454 };
 455
 456 &can0 {
 457         status = "okay";
 458         pinctrl-names = "default";
 459         pinctrl-0 = <&can0_pins>;
 460 };
 461
 462 /* Pin conflict with EMC, muxed by JP5 and JP6 */
 463 &can1 {
 464         status = "disabled";
 465         pinctrl-names = "default";
 466         pinctrl-0 = <&can1_pins>;
 467 };
 468
 469 &emc {
 470         status = "okay";
 471         pinctrl-names = "default";
 472         pinctrl-0 = <&emc_pins>;
 473
 474         cs0 {
 475                 #address-cells = <2>;
 476                 #size-cells = <1>;
 477                 ranges;
 478
 479                 mpmc,cs = <0>;
 480                 mpmc,memory-width = <16>;
 481                 mpmc,byte-lane-low;
 482                 mpmc,write-enable-delay = <0>;
 483                 mpmc,output-enable-delay = <0>;
 484                 mpmc,read-access-delay = <70>;
 485                 mpmc,page-mode-read-delay = <70>;
 486
 487                 /* SST/Microchip SST39VF1601 */
 488                 flash@0,0 {
 489                         compatible = "cfi-flash";
 490                         reg = <0 0 0x400000>;
 491                         bank-width = <2>;
 492                 };
 493         };
 494 };
 495
 496 &enet_tx_clk {
 497         clock-frequency = <50000000>;
 498 };
 499
 500 &i2c0 {
 501         status = "okay";
 502         pinctrl-names = "default";
 503         pinctrl-0 = <&i2c0_pins>;
 504         clock-frequency = <400000>;
 505 };
 506
 507 &i2c1 {
 508         status = "okay";
 509         pinctrl-names = "default";
 510         pinctrl-0 = <&i2c1_pins>;
 511         clock-frequency = <400000>;
 512
 513         sensor@49 {
 514                 compatible = "lm75";
 515                 reg = <0x49>;
 516         };
 517
 518         eeprom@50 {
 519                 compatible = "atmel,24c512";
 520                 reg = <0x50>;
 521         };
 522 };
 523
 524 &lcdc {
 525         status = "okay";
 526         pinctrl-names = "default";
 527         pinctrl-0 = <&lcd_pins>;
 528
 529         max-memory-bandwidth = <92240000>;
 530
 531         port {
 532                 lcdc_output: endpoint {
 533                         remote-endpoint = <&panel_input>;
 534                         arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
 535                 };
 536         };
 537 };
 538
 539 &mac {
 540         status = "okay";
 541         phy-mode = "rmii";
 542         pinctrl-names = "default";
 543         pinctrl-0 = <&enet_rmii_pins>;
 544         phy-handle = <&phy1>;
 545
 546         mdio0 {
 547                 #address-cells = <1>;
 548                 #size-cells = <0>;
 549                 compatible = "snps,dwmac-mdio";
 550
 551                 phy1: ethernet-phy@1 {
 552                         reg = <1>;
 553                 };
 554         };
 555 };
 556
 557 &mmcsd {
 558         status = "okay";
 559         pinctrl-names = "default";
 560         pinctrl-0 = <&sdmmc_pins>;
 561         bus-width = <4>;
 562         vmmc-supply = <&vmmc>;
 563 };
 564
 565 /* Pin conflict with SSP0, the latter is routed to J17 pin header */
 566 &spifi {
 567         status = "okay";
 568         pinctrl-names = "default";
 569         pinctrl-0 = <&spifi_pins>;
 570
 571         /* Atmel AT25DF321A */
 572         flash {
 573                 compatible = "jedec,spi-nor";
 574                 spi-max-frequency = <51000000>;
 575                 spi-cpol;
 576                 spi-cpha;
 577         };
 578 };
 579
 580 &ssp1 {
 581         status = "okay";
 582         pinctrl-names = "default";
 583         pinctrl-0 = <&ssp1_pins>;
 584         num-cs = <1>;
 585         cs-gpios = <&gpio LPC_GPIO(7,19) GPIO_ACTIVE_LOW>;
 586 };
 587
 588 /* Routed to J17 pin header */
 589 &uart0 {
 590         status = "okay";
 591         pinctrl-names = "default";
 592         pinctrl-0 = <&uart0_pins>;
 593 };
 594
 595 /* RS485 */
 596 &uart1 {
 597         status = "okay";
 598         pinctrl-names = "default";
 599         pinctrl-0 = <&uart1_pins>;
 600 };
 601
 602 /* Routed to J17 pin header */
 603 &uart2 {
 604         status = "okay";
 605         pinctrl-names = "default";
 606         pinctrl-0 = <&uart2_pins>;
 607 };
 608
 609 &uart3 {
 610         status = "okay";
 611         pinctrl-names = "default";
 612         pinctrl-0 = <&uart3_pins>;
 613 };
 614
 615 &usb0 {
 616         status = "okay";
 617         pinctrl-names = "default";
 618         pinctrl-0 = <&usb0_pins>;
 619 };