src/arm/nxp/vf/vf610-zii-ssmb-dtu.dts

   1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
   2
   3 /*
   4  * Device tree file for ZII's SSMB DTU board
   5  *
   6  * SSMB - SPU3 Switch Management Board
   7  * DTU - Digital Tapping Unit
   8  *
   9  * Copyright (C) 2015-2019 Zodiac Inflight Innovations
  10  *
  11  * Based on an original 'vf610-twr.dts' which is Copyright 2015,
  12  * Freescale Semiconductor, Inc.
  13  */
  14
  15 /dts-v1/;
  16 #include "vf610.dtsi"
  17
  18 / {
  19         model = "ZII VF610 SSMB DTU Board";
  20         compatible = "zii,vf610dtu", "zii,vf610dev", "fsl,vf610";
  21
  22         chosen {
  23                 stdout-path = &uart0;
  24         };
  25
  26         memory@80000000 {
  27                 device_type = "memory";
  28                 reg = <0x80000000 0x20000000>;
  29         };
  30
  31         gpio-leds {
  32                 compatible = "gpio-leds";
  33                 pinctrl-0 = <&pinctrl_leds_debug>;
  34                 pinctrl-names = "default";
  35
  36                 led-debug {
  37                         label = "zii:green:debug1";
  38                         gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
  39                         linux,default-trigger = "heartbeat";
  40                 };
  41         };
  42
  43         reg_vcc_3v3_mcu: regulator {
  44                 compatible = "regulator-fixed";
  45                 regulator-name = "vcc_3v3_mcu";
  46                 regulator-min-microvolt = <3300000>;
  47                 regulator-max-microvolt = <3300000>;
  48         };
  49
  50         supply-voltage-monitor {
  51                 compatible = "iio-hwmon";
  52                 io-channels = <&adc0 8>, /* 12V_MAIN */
  53                               <&adc0 9>, /* +3.3V    */
  54                               <&adc1 8>, /* VCC_1V5  */
  55                               <&adc1 9>; /* VCC_1V2  */
  56         };
  57 };
  58
  59 &adc0 {
  60         vref-supply = <&reg_vcc_3v3_mcu>;
  61         status = "okay";
  62 };
  63
  64 &adc1 {
  65         vref-supply = <&reg_vcc_3v3_mcu>;
  66         status = "okay";
  67 };
  68
  69 &edma0 {
  70         status = "okay";
  71 };
  72
  73 &edma1 {
  74         status = "okay";
  75 };
  76
  77 &esdhc0 {
  78         pinctrl-names = "default";
  79         pinctrl-0 = <&pinctrl_esdhc0>;
  80         bus-width = <8>;
  81         non-removable;
  82         no-1-8-v;
  83         keep-power-in-suspend;
  84         no-sdio;
  85         no-sd;
  86         status = "okay";
  87 };
  88
  89 &esdhc1 {
  90         pinctrl-names = "default";
  91         pinctrl-0 = <&pinctrl_esdhc1>;
  92         bus-width = <4>;
  93         no-sdio;
  94         status = "okay";
  95 };
  96
  97 &fec1 {
  98         phy-mode = "rmii";
  99         pinctrl-names = "default";
 100         pinctrl-0 = <&pinctrl_fec1>;
 101         status = "okay";
 102
 103         fixed-link {
 104                 speed = <100>;
 105                 full-duplex;
 106         };
 107
 108         mdio1: mdio {
 109                 #address-cells = <1>;
 110                 #size-cells = <0>;
 111                 clock-frequency = <12500000>;
 112                 suppress-preamble;
 113                 status = "okay";
 114
 115                 switch0: ethernet-switch@0 {
 116                         compatible = "marvell,mv88e6190";
 117                         pinctrl-0 = <&pinctrl_gpio_switch0>;
 118                         pinctrl-names = "default";
 119                         reg = <0>;
 120                         eeprom-length = <65536>;
 121                         interrupt-parent = <&gpio3>;
 122                         interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 123                         interrupt-controller;
 124                         #interrupt-cells = <2>;
 125
 126                         ethernet-ports {
 127                                 #address-cells = <1>;
 128                                 #size-cells = <0>;
 129
 130                                 ethernet-port@0 {
 131                                         reg = <0>;
 132                                         phy-mode = "rmii";
 133                                         ethernet = <&fec1>;
 134
 135                                         fixed-link {
 136                                                 speed = <100>;
 137                                                 full-duplex;
 138                                         };
 139                                 };
 140
 141                                 ethernet-port@1 {
 142                                         reg = <1>;
 143                                         label = "eth_cu_100_3";
 144                                 };
 145
 146                                 ethernet-port@5 {
 147                                         reg = <5>;
 148                                         label = "eth_cu_1000_4";
 149                                 };
 150
 151                                 ethernet-port@6 {
 152                                         reg = <6>;
 153                                         label = "eth_cu_1000_5";
 154                                 };
 155
 156                                 ethernet-port@8 {
 157                                         reg = <8>;
 158                                         label = "eth_cu_1000_1";
 159                                 };
 160
 161                                 ethernet-port@9 {
 162                                         reg = <9>;
 163                                         label = "eth_cu_1000_2";
 164                                         phy-handle = <&phy9>;
 165                                         phy-mode = "sgmii";
 166                                         managed = "in-band-status";
 167                                 };
 168                         };
 169
 170                         mdio-external {
 171                                 compatible = "marvell,mv88e6xxx-mdio-external";
 172                                 #address-cells = <1>;
 173                                 #size-cells = <0>;
 174
 175                                 phy9: ethernet-phy@0 {
 176                                         compatible = "ethernet-phy-ieee802.3-c45";
 177                                         pinctrl-0 = <&pinctrl_gpio_phy9>;
 178                                         pinctrl-names = "default";
 179                                         interrupt-parent = <&gpio2>;
 180                                         interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
 181                                         reg = <0>;
 182                                 };
 183                         };
 184                 };
 185         };
 186 };
 187
 188 &i2c0 {
 189         clock-frequency = <100000>;
 190         pinctrl-names = "default";
 191         pinctrl-0 = <&pinctrl_i2c0>;
 192         status = "okay";
 193
 194         gpio6: gpio-expander@22 {
 195                 compatible = "nxp,pca9554";
 196                 reg = <0x22>;
 197                 gpio-controller;
 198                 #gpio-cells = <2>;
 199         };
 200
 201         /* On SSMB */
 202         temperature-sensor@48 {
 203                 compatible = "national,lm75";
 204                 reg = <0x48>;
 205         };
 206
 207         /* On DSB */
 208         temperature-sensor@4d {
 209                 compatible = "national,lm75";
 210                 reg = <0x4d>;
 211         };
 212
 213         eeprom@50 {
 214                 compatible = "atmel,24c04";
 215                 reg = <0x50>;
 216                 label = "nameplate";
 217         };
 218
 219         eeprom@52 {
 220                 compatible = "atmel,24c04";
 221                 reg = <0x52>;
 222         };
 223 };
 224
 225 &snvsrtc {
 226         status = "disabled";
 227 };
 228
 229 &uart0 {
 230         pinctrl-names = "default";
 231         pinctrl-0 = <&pinctrl_uart0>;
 232         status = "okay";
 233 };
 234
 235 &iomuxc {
 236         pinctrl_dspi1: dspi1grp {
 237                 fsl,pins = <
 238                         VF610_PAD_PTD5__DSPI1_CS0               0x1182
 239                         VF610_PAD_PTD4__DSPI1_CS1               0x1182
 240                         VF610_PAD_PTC6__DSPI1_SIN               0x1181
 241                         VF610_PAD_PTC7__DSPI1_SOUT              0x1182
 242                         VF610_PAD_PTC8__DSPI1_SCK               0x1182
 243                 >;
 244         };
 245
 246         pinctrl_esdhc0: esdhc0grp {
 247                 fsl,pins = <
 248                         VF610_PAD_PTC0__ESDHC0_CLK              0x31ef
 249                         VF610_PAD_PTC1__ESDHC0_CMD              0x31ef
 250                         VF610_PAD_PTC2__ESDHC0_DAT0             0x31ef
 251                         VF610_PAD_PTC3__ESDHC0_DAT1             0x31ef
 252                         VF610_PAD_PTC4__ESDHC0_DAT2             0x31ef
 253                         VF610_PAD_PTC5__ESDHC0_DAT3             0x31ef
 254                         VF610_PAD_PTD23__ESDHC0_DAT4            0x31ef
 255                         VF610_PAD_PTD22__ESDHC0_DAT5            0x31ef
 256                         VF610_PAD_PTD21__ESDHC0_DAT6            0x31ef
 257                         VF610_PAD_PTD20__ESDHC0_DAT7            0x31ef
 258                 >;
 259         };
 260
 261         pinctrl_esdhc1: esdhc1grp {
 262                 fsl,pins = <
 263                         VF610_PAD_PTA24__ESDHC1_CLK             0x31ef
 264                         VF610_PAD_PTA25__ESDHC1_CMD             0x31ef
 265                         VF610_PAD_PTA26__ESDHC1_DAT0            0x31ef
 266                         VF610_PAD_PTA27__ESDHC1_DAT1            0x31ef
 267                         VF610_PAD_PTA28__ESDHC1_DATA2           0x31ef
 268                         VF610_PAD_PTA29__ESDHC1_DAT3            0x31ef
 269                 >;
 270         };
 271
 272         pinctrl_fec1: fec1grp {
 273                 fsl,pins = <
 274                         VF610_PAD_PTA6__RMII_CLKIN              0x30d1
 275                         VF610_PAD_PTC9__ENET_RMII1_MDC          0x30d2
 276                         VF610_PAD_PTC10__ENET_RMII1_MDIO        0x30d3
 277                         VF610_PAD_PTC11__ENET_RMII1_CRS         0x30d1
 278                         VF610_PAD_PTC12__ENET_RMII1_RXD1        0x30d1
 279                         VF610_PAD_PTC13__ENET_RMII1_RXD0        0x30d1
 280                         VF610_PAD_PTC14__ENET_RMII1_RXER        0x30d1
 281                         VF610_PAD_PTC15__ENET_RMII1_TXD1        0x30d2
 282                         VF610_PAD_PTC16__ENET_RMII1_TXD0        0x30d2
 283                         VF610_PAD_PTC17__ENET_RMII1_TXEN        0x30d2
 284                 >;
 285         };
 286
 287         pinctrl_gpio_phy9: pinctrl-gpio-phy9 {
 288                 fsl,pins = <
 289                         VF610_PAD_PTB24__GPIO_94                0x219d
 290                 >;
 291         };
 292
 293         pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
 294                 fsl,pins = <
 295                         VF610_PAD_PTB28__GPIO_98                0x219d
 296                 >;
 297         };
 298
 299         pinctrl_i2c0: i2c0grp {
 300                 fsl,pins = <
 301                         VF610_PAD_PTB14__I2C0_SCL               0x37ff
 302                         VF610_PAD_PTB15__I2C0_SDA               0x37ff
 303                 >;
 304         };
 305
 306         pinctrl_i2c1: i2c1grp {
 307                 fsl,pins = <
 308                         VF610_PAD_PTB16__I2C1_SCL               0x37ff
 309                         VF610_PAD_PTB17__I2C1_SDA               0x37ff
 310                 >;
 311         };
 312
 313         pinctrl_leds_debug: pinctrl-leds-debug {
 314                 fsl,pins = <
 315                         VF610_PAD_PTD3__GPIO_82                 0x31c2
 316                 >;
 317         };
 318
 319         pinctrl_uart0: uart0grp {
 320                 fsl,pins = <
 321                         VF610_PAD_PTB10__UART0_TX               0x21a2
 322                         VF610_PAD_PTB11__UART0_RX               0x21a1
 323                 >;
 324         };
 325 };