src/arm/qcom/qcom-apq8026-lg-lenok.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "qcom-msm8226.dtsi"
   9 #include "qcom-pm8226.dtsi"
  10
  11 /delete-node/ &adsp_region;
  12
  13 / {
  14         model = "LG G Watch R";
  15         compatible = "lg,lenok", "qcom,apq8026";
  16         chassis-type = "watch";
  17         qcom,board-id = <132 0x0a>;
  18         qcom,msm-id = <199 0x20000>;
  19
  20         aliases {
  21                 serial0 = &blsp1_uart3;
  22                 serial1 = &blsp1_uart4;
  23         };
  24
  25         chosen {
  26                 stdout-path = "serial0:115200n8";
  27         };
  28
  29         reserved-memory {
  30                 sbl_region: sbl@2f00000 {
  31                         reg = <0x02f00000 0x100000>;
  32                         no-map;
  33                 };
  34
  35                 external_image_region: external-image@3100000 {
  36                         reg = <0x03100000 0x200000>;
  37                         no-map;
  38                 };
  39
  40                 adsp_region: adsp@3300000 {
  41                         reg = <0x03300000 0x1400000>;
  42                         no-map;
  43                 };
  44         };
  45
  46         vreg_wlan: wlan-regulator {
  47                 compatible = "regulator-fixed";
  48
  49                 regulator-name = "wl-reg";
  50                 regulator-min-microvolt = <2950000>;
  51                 regulator-max-microvolt = <2950000>;
  52
  53                 gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>;
  54                 enable-active-high;
  55
  56                 pinctrl-names = "default";
  57                 pinctrl-0 = <&wlan_regulator_default_state>;
  58         };
  59 };
  60
  61 &adsp {
  62         status = "okay";
  63 };
  64
  65 &blsp1_i2c1 {
  66         status = "okay";
  67
  68         fuel-gauge@55 {
  69                 compatible = "ti,bq27421";
  70                 reg = <0x55>;
  71         };
  72 };
  73
  74 &blsp1_i2c5 {
  75         status = "okay";
  76         clock-frequency = <384000>;
  77
  78         touchscreen@20 {
  79                 compatible = "syna,rmi4-i2c";
  80                 reg = <0x20>;
  81
  82                 interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
  83                 vdd-supply = <&pm8226_l15>;
  84                 vio-supply = <&pm8226_l22>;
  85
  86                 pinctrl-names = "default";
  87                 pinctrl-0 = <&touch_pins>;
  88
  89                 #address-cells = <1>;
  90                 #size-cells = <0>;
  91
  92                 rmi4-f01@1 {
  93                         reg = <0x1>;
  94                         syna,nosleep-mode = <1>;
  95                 };
  96
  97                 rmi4-f12@12 {
  98                         reg = <0x12>;
  99                         syna,sensor-type = <1>;
 100                 };
 101         };
 102 };
 103
 104 &blsp1_uart3 {
 105         status = "okay";
 106 };
 107
 108 &blsp1_uart4 {
 109         status = "okay";
 110
 111         pinctrl-names = "default";
 112         pinctrl-0 = <&blsp1_uart4_default_state>;
 113
 114         bluetooth {
 115                 compatible = "brcm,bcm43430a0-bt";
 116
 117                 max-speed = <3000000>;
 118
 119                 pinctrl-names = "default";
 120                 pinctrl-0 = <&bluetooth_default_state>;
 121
 122                 host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
 123                 device-wakeup-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
 124                 shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
 125         };
 126 };
 127
 128 &rpm_requests {
 129         regulators {
 130                 compatible = "qcom,rpm-pm8226-regulators";
 131
 132                 pm8226_s3: s3 {
 133                         regulator-min-microvolt = <1200000>;
 134                         regulator-max-microvolt = <1350000>;
 135                 };
 136                 pm8226_s4: s4 {
 137                         regulator-min-microvolt = <1800000>;
 138                         regulator-max-microvolt = <2200000>;
 139                 };
 140                 pm8226_s5: s5 {
 141                         regulator-min-microvolt = <1150000>;
 142                         regulator-max-microvolt = <1150000>;
 143                 };
 144
 145                 pm8226_l1: l1 {
 146                         regulator-min-microvolt = <1225000>;
 147                         regulator-max-microvolt = <1225000>;
 148                 };
 149                 pm8226_l2: l2 {
 150                         regulator-min-microvolt = <1200000>;
 151                         regulator-max-microvolt = <1200000>;
 152                 };
 153                 pm8226_l3: l3 {
 154                         regulator-min-microvolt = <750000>;
 155                         regulator-max-microvolt = <1337500>;
 156                 };
 157                 pm8226_l4: l4 {
 158                         regulator-min-microvolt = <1200000>;
 159                         regulator-max-microvolt = <1200000>;
 160                 };
 161                 pm8226_l5: l5 {
 162                         regulator-min-microvolt = <1200000>;
 163                         regulator-max-microvolt = <1200000>;
 164                 };
 165                 pm8226_l6: l6 {
 166                         regulator-min-microvolt = <1800000>;
 167                         regulator-max-microvolt = <1800000>;
 168                 };
 169                 pm8226_l7: l7 {
 170                         regulator-min-microvolt = <1850000>;
 171                         regulator-max-microvolt = <1850000>;
 172                 };
 173                 pm8226_l8: l8 {
 174                         regulator-min-microvolt = <1800000>;
 175                         regulator-max-microvolt = <1800000>;
 176                 };
 177                 pm8226_l9: l9 {
 178                         regulator-min-microvolt = <2050000>;
 179                         regulator-max-microvolt = <2050000>;
 180                 };
 181                 pm8226_l10: l10 {
 182                         regulator-min-microvolt = <1800000>;
 183                         regulator-max-microvolt = <1800000>;
 184                 };
 185                 pm8226_l12: l12 {
 186                         regulator-min-microvolt = <1800000>;
 187                         regulator-max-microvolt = <1800000>;
 188                 };
 189                 pm8226_l14: l14 {
 190                         regulator-min-microvolt = <2750000>;
 191                         regulator-max-microvolt = <2750000>;
 192                 };
 193                 pm8226_l15: l15 {
 194                         regulator-min-microvolt = <3300000>;
 195                         regulator-max-microvolt = <3300000>;
 196                 };
 197                 pm8226_l16: l16 {
 198                         regulator-min-microvolt = <3000000>;
 199                         regulator-max-microvolt = <3350000>;
 200                 };
 201                 pm8226_l17: l17 {
 202                         regulator-min-microvolt = <2950000>;
 203                         regulator-max-microvolt = <2950000>;
 204                 };
 205                 pm8226_l18: l18 {
 206                         regulator-min-microvolt = <3000000>;
 207                         regulator-max-microvolt = <3300000>;
 208                 };
 209                 pm8226_l19: l19 {
 210                         regulator-min-microvolt = <3000000>;
 211                         regulator-max-microvolt = <3000000>;
 212                 };
 213                 pm8226_l20: l20 {
 214                         regulator-min-microvolt = <3075000>;
 215                         regulator-max-microvolt = <3075000>;
 216                 };
 217                 pm8226_l21: l21 {
 218                         regulator-min-microvolt = <1800000>;
 219                         regulator-max-microvolt = <2950000>;
 220                 };
 221                 pm8226_l22: l22 {
 222                         regulator-min-microvolt = <1800000>;
 223                         regulator-max-microvolt = <1800000>;
 224                 };
 225                 pm8226_l23: l23 {
 226                         regulator-min-microvolt = <1800000>;
 227                         regulator-max-microvolt = <2950000>;
 228                 };
 229                 pm8226_l24: l24 {
 230                         regulator-min-microvolt = <1300000>;
 231                         regulator-max-microvolt = <1350000>;
 232                 };
 233                 pm8226_l25: l25 {
 234                         regulator-min-microvolt = <1775000>;
 235                         regulator-max-microvolt = <2125000>;
 236                 };
 237                 pm8226_l26: l26 {
 238                         regulator-min-microvolt = <1225000>;
 239                         regulator-max-microvolt = <1225000>;
 240                 };
 241                 pm8226_l27: l27 {
 242                         regulator-min-microvolt = <2050000>;
 243                         regulator-max-microvolt = <2050000>;
 244                 };
 245                 pm8226_l28: l28 {
 246                         regulator-min-microvolt = <2700000>;
 247                         regulator-max-microvolt = <3000000>;
 248                 };
 249
 250                 pm8226_lvs1: lvs1 {};
 251         };
 252 };
 253
 254 &sdhc_1 {
 255         status = "okay";
 256
 257         vmmc-supply = <&pm8226_l17>;
 258         vqmmc-supply = <&pm8226_l6>;
 259
 260         bus-width = <8>;
 261         non-removable;
 262 };
 263
 264 &sdhc_3 {
 265         status = "okay";
 266
 267         max-frequency = <100000000>;
 268         non-removable;
 269
 270         vmmc-supply = <&vreg_wlan>;
 271         vqmmc-supply = <&pm8226_l6>;
 272
 273         #address-cells = <1>;
 274         #size-cells = <0>;
 275
 276         wifi@1 {
 277                 compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
 278                 reg = <1>;
 279
 280                 interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_FALLING>;
 281                 interrupt-names = "host-wake";
 282
 283                 pinctrl-names = "default";
 284                 pinctrl-0 = <&wlan_hostwake_default_state>;
 285         };
 286 };
 287
 288 &smbb {
 289         qcom,fast-charge-safe-current = <450000>;
 290         qcom,fast-charge-current-limit = <400000>;
 291         qcom,fast-charge-safe-voltage = <4350000>;
 292         qcom,fast-charge-high-threshold-voltage = <4350000>;
 293         qcom,auto-recharge-threshold-voltage = <4240000>;
 294         qcom,minimum-input-voltage = <4450000>;
 295 };
 296
 297 &tlmm {
 298         blsp1_uart4_default_state: blsp1-uart4-default-state {
 299                 pins = "gpio12", "gpio13", "gpio14", "gpio15";
 300                 function = "blsp_uart4";
 301                 drive-strength = <8>;
 302                 bias-disable;
 303         };
 304
 305         bluetooth_default_state: bluetooth-default-state {
 306                 pins = "gpio47", "gpio48";
 307                 function = "gpio";
 308                 drive-strength = <2>;
 309                 bias-disable;
 310         };
 311
 312         touch_pins: touch-state {
 313                 irq-pins {
 314                         pins = "gpio17";
 315                         function = "gpio";
 316
 317                         drive-strength = <8>;
 318                         bias-pull-down;
 319                 };
 320
 321                 reset-pins {
 322                         pins = "gpio16";
 323                         function = "gpio";
 324
 325                         drive-strength = <8>;
 326                         bias-disable;
 327                         output-high;
 328                 };
 329         };
 330
 331         wlan_hostwake_default_state: wlan-hostwake-default-state {
 332                 pins = "gpio37";
 333                 function = "gpio";
 334                 drive-strength = <2>;
 335                 bias-disable;
 336         };
 337
 338         wlan_regulator_default_state: wlan-regulator-default-state {
 339                 pins = "gpio46";
 340                 function = "gpio";
 341                 drive-strength = <2>;
 342                 bias-pull-up;
 343         };
 344 };
 345
 346 &usb {
 347         status = "okay";
 348         extcon = <&smbb>;
 349         dr_mode = "peripheral";
 350 };
 351
 352 &usb_hs_phy {
 353         extcon = <&smbb>;
 354         v1p8-supply = <&pm8226_l10>;
 355         v3p3-supply = <&pm8226_l20>;
 356 };