src/arm/ti/omap/am335x-regor.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2019 Phytec Messtechnik GmbH
   4  * Author: Teresa Remmet <t.remmet@phytec.de>
   5  *
   6  */
   7
   8 / {
   9         model = "Phytec AM335x phyBOARD-REGOR";
  10         compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx";
  11
  12         vcc3v3: fixedregulator@1 {
  13                 compatible = "regulator-fixed";
  14                 regulator-name = "vcc3v3";
  15                 regulator-min-microvolt = <3300000>;
  16                 regulator-max-microvolt = <3300000>;
  17                 regulator-boot-on;
  18         };
  19
  20         /* User IO */
  21         user_leds: user-leds {
  22                 compatible = "gpio-leds";
  23                 pinctrl-names = "default";
  24                 pinctrl-0 = <&user_leds_pins>;
  25
  26                 run_stop-led {
  27                         gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
  28                         linux,default-trigger = "gpio";
  29                         default-state = "off";
  30                 };
  31
  32                 error-led {
  33                         gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
  34                         linux,default-trigger = "gpio";
  35                         default-state = "off";
  36                 };
  37         };
  38 };
  39
  40 /* User Leds */
  41 &am33xx_pinmux {
  42         user_leds_pins: pinmux-user-leds-pins {
  43                 pinctrl-single,pins = <
  44                         AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)    /* lcd_hsync.gpio2_22 */
  45                         AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7)   /* mcasp0_fsx.gpio3_15 */
  46                 >;
  47         };
  48 };
  49
  50 /* CAN Busses */
  51 &am33xx_pinmux {
  52         dcan1_pins: pinmux-dcan1-pins {
  53                 pinctrl-single,pins = <
  54                         AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2)     /* uart0_ctsn.d_can1_tx */
  55                         AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)      /* uart0_rtsn.d_can1_rx */
  56                 >;
  57         };
  58 };
  59
  60 &dcan1 {
  61         pinctrl-names = "default";
  62         pinctrl-0 = <&dcan1_pins>;
  63         status = "okay";
  64 };
  65
  66 /* Ethernet */
  67 &am33xx_pinmux {
  68         ethernet1_pins: pinmux-ethernet1-pins {
  69                 pinctrl-single,pins = <
  70                         AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)               /* gpmc_a0.mii2_txen */
  71                         AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)       /* gpmc_a1.mii2_rxdv */
  72                         AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1)               /* gpmc_a2.mii2_txd3 */
  73                         AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1)               /* gpmc_a3.mii2_txd2 */
  74                         AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1)               /* gpmc_a4.mii2_txd1 */
  75                         AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1)               /* gpmc_a5.mii2_txd0 */
  76                         AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1)       /* gpmc_a6.mii2_txclk */
  77                         AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1)       /* gpmc_a7.mii2_rxclk */
  78                         AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1)       /* gpmc_a8.mii2_rxd3 */
  79                         AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1)        /* gpmc_a9.mii2_rxd2 */
  80                         AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1)      /* gpmc_a10.mii2_rxd1 */
  81                         AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1)      /* gpmc_a11.mii2_rxd0 */
  82                         AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1)      /* gpmc_wpn.mii2_rxerr */
  83                         AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1)     /* gpmc_ben1.mii2_col */
  84                 >;
  85         };
  86 };
  87
  88 &cpsw_port2 {
  89         status = "okay";
  90         phy-handle = <&phy1>;
  91         phy-mode = "mii";
  92         ti,dual-emac-pvid = <2>;
  93 };
  94
  95 &davinci_mdio_sw {
  96         phy1: ethernet-phy@1 {
  97                 reg = <1>;
  98         };
  99 };
 100
 101 &mac_sw {
 102         pinctrl-names = "default";
 103         pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
 104 };
 105
 106 /* GPIOs */
 107 &am33xx_pinmux {
 108         pinctrl-names = "default";
 109         pinctrl-0 = <&user_gpios_pins>;
 110
 111         user_gpios_pins: pinmux-user-gpios-pins {
 112                 pinctrl-single,pins = <
 113                         /* DIGIN 1-4 */
 114                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7)              /* gpmc_ad11.gpio0_27 */
 115                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT, MUX_MODE7)              /* gpmc_ad10.gpio0_26 */
 116                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT, MUX_MODE7)               /* gpmc_ad9.gpio0_23 */
 117                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT, MUX_MODE7)               /* gpmc_ad8.gpio0_22 */
 118                         /* DIGOUT 1-4 */
 119                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE7)             /* gpmc_ad15.gpio1_15 */
 120                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE7)             /* gpmc_ad14.gpio1_14 */
 121                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE7)             /* gpmc_ad13.gpio1_13 */
 122                         AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE7)             /* gpmc_ad12.gpio1_12 */
 123                 >;
 124         };
 125 };
 126
 127 /* MMC */
 128 &am33xx_pinmux {
 129         mmc1_pins: pinmux-mmc1-pins {
 130                 pinctrl-single,pins = <
 131                         AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 132                         AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
 133                         AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
 134                         AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
 135                         AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
 136                         AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
 137                         AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7)        /* spi0_cs1.mmc0_sdcd */
 138                 >;
 139         };
 140 };
 141
 142 &mmc1 {
 143         vmmc-supply = <&vcc3v3>;
 144         bus-width = <4>;
 145         pinctrl-names = "default";
 146         pinctrl-0 = <&mmc1_pins>;
 147         cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 148         status = "okay";
 149 };
 150
 151 /* RTC */
 152 &i2c_rtc {
 153         status = "okay";
 154 };
 155
 156 /* UARTs */
 157 &am33xx_pinmux {
 158         uart0_pins: pinmux-uart0-pins {
 159                 pinctrl-single,pins = <
 160                         AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 161                         AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 162                 >;
 163         };
 164
 165         uart2_pins: pinmux-uart2-pins {
 166                 pinctrl-single,pins = <
 167                         AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)     /* mii1_tx_clk.uart2_rxd */
 168                         AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)  /* mii1_rx_clk.uart2_txd */
 169                 >;
 170         };
 171 };
 172
 173 &uart0 {
 174         pinctrl-names = "default";
 175         pinctrl-0 = <&uart0_pins>;
 176         status = "okay";
 177 };
 178
 179 &uart2 {
 180         pinctrl-names = "default";
 181         pinctrl-0 = <&uart2_pins>;
 182         status = "okay";
 183 };
 184
 185 /* RS485 - UART1 */
 186 &am33xx_pinmux {
 187         uart1_rs485_pins: pinmux-uart1-rs485-pins {
 188                 pinctrl-single,pins = <
 189                         AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 190                         AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 191                         AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0)
 192                 >;
 193         };
 194 };
 195
 196 &uart1 {
 197         pinctrl-names = "default";
 198         pinctrl-0 = <&uart1_rs485_pins>;
 199         status = "okay";
 200         linux,rs485-enabled-at-boot-time;
 201 };