src/arm/ti/omap/am437x-gp-evm.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
   4  */
   5
   6 /* AM437x GP EVM */
   7
   8 /dts-v1/;
   9
  10 #include "am4372.dtsi"
  11 #include <dt-bindings/pinctrl/am43xx.h>
  12 #include <dt-bindings/pwm/pwm.h>
  13 #include <dt-bindings/gpio/gpio.h>
  14
  15 / {
  16         model = "TI AM437x GP EVM";
  17         compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
  18
  19         aliases {
  20                 display0 = &lcd0;
  21         };
  22
  23         chosen {
  24                 stdout-path = &uart0;
  25         };
  26
  27         evm_v3_3d: fixedregulator-v3_3d {
  28                 compatible = "regulator-fixed";
  29                 regulator-name = "evm_v3_3d";
  30                 regulator-min-microvolt = <3300000>;
  31                 regulator-max-microvolt = <3300000>;
  32                 enable-active-high;
  33         };
  34
  35         vtt_fixed: fixedregulator-vtt {
  36                 compatible = "regulator-fixed";
  37                 regulator-name = "vtt_fixed";
  38                 regulator-min-microvolt = <1500000>;
  39                 regulator-max-microvolt = <1500000>;
  40                 regulator-always-on;
  41                 regulator-boot-on;
  42                 enable-active-high;
  43                 gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
  44         };
  45
  46         vmmcwl_fixed: fixedregulator-mmcwl {
  47                 compatible = "regulator-fixed";
  48                 regulator-name = "vmmcwl_fixed";
  49                 regulator-min-microvolt = <1800000>;
  50                 regulator-max-microvolt = <1800000>;
  51                 gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
  52                 enable-active-high;
  53         };
  54
  55         lcd_bl: backlight {
  56                 compatible = "pwm-backlight";
  57                 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
  58                 brightness-levels = <0 51 53 56 62 75 101 152 255>;
  59                 default-brightness-level = <8>;
  60         };
  61
  62         matrix_keypad: matrix_keypad0 {
  63                 compatible = "gpio-matrix-keypad";
  64                 debounce-delay-ms = <5>;
  65                 col-scan-delay-us = <2>;
  66
  67                 pinctrl-names = "default", "sleep";
  68                 pinctrl-0 = <&matrix_keypad_default>;
  69                 pinctrl-1 = <&matrix_keypad_sleep>;
  70
  71                 wakeup-source;
  72
  73                 row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */
  74                                 &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
  75                                 &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
  76
  77                 col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
  78                                 &gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
  79
  80                 linux,keymap = <0x00000201      /* P1 */
  81                                 0x00010202      /* P2 */
  82                                 0x01000067      /* UP */
  83                                 0x0101006a      /* RIGHT */
  84                                 0x02000069      /* LEFT */
  85                                 0x0201006c>;      /* DOWN */
  86                 };
  87
  88         lcd0: display {
  89                 compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
  90                 label = "lcd";
  91
  92                 backlight = <&lcd_bl>;
  93
  94                 port {
  95                         lcd_in: endpoint {
  96                                 remote-endpoint = <&dpi_out>;
  97                         };
  98                 };
  99         };
 100
 101         /* fixed 12MHz oscillator */
 102         refclk: oscillator {
 103                 #clock-cells = <0>;
 104                 compatible = "fixed-clock";
 105                 clock-frequency = <12000000>;
 106         };
 107
 108         /* fixed 32k external oscillator clock */
 109         clk_32k_rtc: clk_32k_rtc {
 110                 #clock-cells = <0>;
 111                 compatible = "fixed-clock";
 112                 clock-frequency = <32768>;
 113         };
 114
 115         sound0: sound0 {
 116                 compatible = "simple-audio-card";
 117                 simple-audio-card,name = "AM437x-GP-EVM";
 118                 simple-audio-card,widgets =
 119                         "Headphone", "Headphone Jack",
 120                         "Line", "Line In";
 121                 simple-audio-card,routing =
 122                         "Headphone Jack",       "HPLOUT",
 123                         "Headphone Jack",       "HPROUT",
 124                         "LINE1L",               "Line In",
 125                         "LINE1R",               "Line In";
 126                 simple-audio-card,format = "dsp_b";
 127                 simple-audio-card,bitclock-master = <&sound0_master>;
 128                 simple-audio-card,frame-master = <&sound0_master>;
 129                 simple-audio-card,bitclock-inversion;
 130
 131                 simple-audio-card,cpu {
 132                         sound-dai = <&mcasp1>;
 133                         system-clock-frequency = <12000000>;
 134                 };
 135
 136                 sound0_master: simple-audio-card,codec {
 137                         sound-dai = <&tlv320aic3106>;
 138                         system-clock-frequency = <12000000>;
 139                 };
 140         };
 141
 142         beeper: beeper {
 143                 compatible = "gpio-beeper";
 144                 pinctrl-names = "default";
 145                 pinctrl-0 = <&beeper_pins_default>;
 146                 pinctrl-1 = <&beeper_pins_sleep>;
 147                 gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
 148         };
 149 };
 150
 151 &am43xx_pinmux {
 152         pinctrl-names = "default", "sleep";
 153         pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins &debugss_pins>;
 154         pinctrl-1 = <&wlan_pins_sleep>;
 155
 156         ddr3_vtt_toggle_default: ddr-vtt-toggle-default-pins {
 157                 pinctrl-single,pins = <
 158                         0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) /* spi0_cs0.gpio5_7 */
 159                 >;
 160         };
 161
 162         i2c0_pins: i2c0-pins {
 163                 pinctrl-single,pins = <
 164                         AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
 165                         AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 166                 >;
 167         };
 168
 169         i2c1_pins: i2c1-pins {
 170                 pinctrl-single,pins = <
 171                         AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
 172                         AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 173                 >;
 174         };
 175
 176         mmc1_pins: mmc1-pins {
 177                 pinctrl-single,pins = <
 178                         AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 179                 >;
 180         };
 181
 182         ecap0_pins: backlight-pins {
 183                 pinctrl-single,pins = <
 184                         AM4372_IOPAD(0x964, MUX_MODE0)       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 185                 >;
 186         };
 187
 188         pixcir_ts_pins: pixcir-ts-pins {
 189                 pinctrl-single,pins = <
 190                         AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
 191                 >;
 192         };
 193
 194         cpsw_default: cpsw-default-pins {
 195                 pinctrl-single,pins = <
 196                         /* Slave 1 */
 197                         AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txen.rgmii1_txen */
 198                         AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxdv.rgmii1_rxctl */
 199                         AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd1.rgmii1_txd3 */
 200                         AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd0.rgmii1_txd2 */
 201                         AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd1.rgmii1_txd1 */
 202                         AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txd0.rgmii1_txd0 */
 203                         AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mii1_txclk.rmii1_tclk */
 204                         AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxclk.rmii1_rclk */
 205                         AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd1.rgmii1_rxd3 */
 206                         AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd0.rgmii1_rxd2 */
 207                         AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd1.rgmii1_rxd1 */
 208                         AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)     /* mii1_rxd0.rgmii1_rxd0 */
 209                 >;
 210         };
 211
 212         cpsw_sleep: cpsw-sleep-pins {
 213                 pinctrl-single,pins = <
 214                         /* Slave 1 reset value */
 215                         AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
 216                         AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
 217                         AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 218                         AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
 219                         AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
 220                         AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
 221                         AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 222                         AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
 223                         AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 224                         AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
 225                         AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 226                         AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 227                 >;
 228         };
 229
 230         davinci_mdio_default: davinci-mdio-default-pins {
 231                 pinctrl-single,pins = <
 232                         /* MDIO */
 233                         AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)       /* mdio_data.mdio_data */
 234                         AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)                      /* mdio_clk.mdio_clk */
 235                 >;
 236         };
 237
 238         davinci_mdio_sleep: davinci-mdio-sleep-pins {
 239                 pinctrl-single,pins = <
 240                         /* MDIO reset value */
 241                         AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
 242                         AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 243                 >;
 244         };
 245
 246         nand_flash_x8: nand-flash-x8-pins {
 247                 pinctrl-single,pins = <
 248                         AM4372_IOPAD(0x800, PIN_INPUT  | MUX_MODE0)     /* gpmc_ad0.gpmc_ad0 */
 249                         AM4372_IOPAD(0x804, PIN_INPUT  | MUX_MODE0)     /* gpmc_ad1.gpmc_ad1 */
 250                         AM4372_IOPAD(0x808, PIN_INPUT  | MUX_MODE0)     /* gpmc_ad2.gpmc_ad2 */
 251                         AM4372_IOPAD(0x80c, PIN_INPUT  | MUX_MODE0)     /* gpmc_ad3.gpmc_ad3 */
 252                         AM4372_IOPAD(0x810, PIN_INPUT  | MUX_MODE0)     /* gpmc_ad4.gpmc_ad4 */
 253                         AM4372_IOPAD(0x814, PIN_INPUT  | MUX_MODE0)     /* gpmc_ad5.gpmc_ad5 */
 254                         AM4372_IOPAD(0x818, PIN_INPUT  | MUX_MODE0)     /* gpmc_ad6.gpmc_ad6 */
 255                         AM4372_IOPAD(0x81c, PIN_INPUT  | MUX_MODE0)     /* gpmc_ad7.gpmc_ad7 */
 256                         AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)       /* gpmc_wait0.gpmc_wait0 */
 257                         AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)      /* gpmc_wpn.gpmc_wpn */
 258                         AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)             /* gpmc_csn0.gpmc_csn0  */
 259                         AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)             /* gpmc_advn_ale.gpmc_advn_ale */
 260                         AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)             /* gpmc_oen_ren.gpmc_oen_ren */
 261                         AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)             /* gpmc_wen.gpmc_wen */
 262                         AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)             /* gpmc_be0n_cle.gpmc_be0n_cle */
 263                 >;
 264         };
 265
 266         dss_pins: dss-pins {
 267                 pinctrl-single,pins = <
 268                         AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
 269                         AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
 270                         AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
 271                         AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
 272                         AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
 273                         AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
 274                         AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
 275                         AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
 276                         AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
 277                         AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
 278                         AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
 279                         AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
 280                         AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
 281                         AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
 282                         AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
 283                         AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
 284                         AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
 285                         AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
 286                         AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
 287                         AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
 288                         AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
 289                         AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
 290                         AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
 291                         AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
 292                         AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
 293                         AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
 294                         AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
 295                         AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
 296
 297                 >;
 298         };
 299
 300         display_mux_pins: display-mux-pins {
 301                 pinctrl-single,pins = <
 302                         /* GPIO 5_8 to select LCD / HDMI */
 303                         AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7)
 304                 >;
 305         };
 306
 307         dcan0_default: dcan0-default-pins {
 308                 pinctrl-single,pins = <
 309                         AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)             /* uart1_ctsn.d_can0_tx */
 310                         AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2)       /* uart1_rtsn.d_can0_rx */
 311                 >;
 312         };
 313
 314         dcan0_sleep: dcan0-sleep-pins {
 315                 pinctrl-single,pins = <
 316                         AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7)       /* uart1_ctsn.gpio0_12 */
 317                         AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7)       /* uart1_rtsn.gpio0_13 */
 318                 >;
 319         };
 320
 321         dcan1_default: dcan1-default-pins {
 322                 pinctrl-single,pins = <
 323                         AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2)             /* uart1_rxd.d_can1_tx */
 324                         AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2)       /* uart1_txd.d_can1_rx */
 325                 >;
 326         };
 327
 328         dcan1_sleep: dcan1-sleep-pins {
 329                 pinctrl-single,pins = <
 330                         AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7)       /* uart1_rxd.gpio0_14 */
 331                         AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7)       /* uart1_txd.gpio0_15 */
 332                 >;
 333         };
 334
 335         vpfe0_pins_default: vpfe0-default-pins {
 336                 pinctrl-single,pins = <
 337                         AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
 338                         AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
 339                         AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
 340                         AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
 341                         AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
 342                         AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
 343                         AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
 344                         AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
 345                         AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
 346                         AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
 347                         AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
 348                         AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
 349                         AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
 350                 >;
 351         };
 352
 353         vpfe0_pins_sleep: vpfe0-sleep-pins {
 354                 pinctrl-single,pins = <
 355                         AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
 356                         AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
 357                         AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
 358                         AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
 359                         AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
 360                         AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
 361                         AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
 362                         AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
 363                         AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
 364                         AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
 365                         AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
 366                         AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
 367                         AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
 368                 >;
 369         };
 370
 371         vpfe1_pins_default: vpfe1-default-pins {
 372                 pinctrl-single,pins = <
 373                         AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
 374                         AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
 375                         AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
 376                         AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
 377                         AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
 378                         AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
 379                         AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
 380                         AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
 381                         AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
 382                         AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
 383                         AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
 384                         AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
 385                         AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
 386                 >;
 387         };
 388
 389         vpfe1_pins_sleep: vpfe1-sleep-pins {
 390                 pinctrl-single,pins = <
 391                         AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
 392                         AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
 393                         AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
 394                         AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
 395                         AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
 396                         AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
 397                         AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
 398                         AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
 399                         AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
 400                         AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
 401                         AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
 402                         AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
 403                         AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
 404                 >;
 405         };
 406
 407         mmc3_pins_default: mmc3-default-pins {
 408                 pinctrl-single,pins = <
 409                         AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
 410                         AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
 411                         AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
 412                         AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
 413                         AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
 414                         AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
 415                 >;
 416         };
 417
 418         mmc3_pins_sleep: mmc3-sleep-pins {
 419                 pinctrl-single,pins = <
 420                         AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_clk.mmc2_clk */
 421                         AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_csn3.mmc2_cmd */
 422                         AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_a1.mmc2_dat0 */
 423                         AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_a2.mmc2_dat1 */
 424                         AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_a3.mmc2_dat2 */
 425                         AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_be1n.mmc2_dat3 */
 426                 >;
 427         };
 428
 429         wlan_pins_default: wlan-default-pins {
 430                 pinctrl-single,pins = <
 431                         AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)            /* gpmc_a4.gpio1_20 WL_EN */
 432                         AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)      /* gpmc_a7.gpio1_23 WL_IRQ*/
 433                         AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)            /* gpmc_a0.gpio1_16 BT_EN*/
 434                 >;
 435         };
 436
 437         wlan_pins_sleep: wlan-sleep-pins {
 438                 pinctrl-single,pins = <
 439                         AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)            /* gpmc_a4.gpio1_20 WL_EN */
 440                         AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)      /* gpmc_a7.gpio1_23 WL_IRQ*/
 441                         AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7)              /* gpmc_a0.gpio1_16 BT_EN*/
 442                 >;
 443         };
 444
 445         uart3_pins: uart3-pins {
 446                 pinctrl-single,pins = <
 447                         AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0)              /* uart3_rxd.uart3_rxd */
 448                         AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
 449                         AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0)       /* uart3_ctsn.uart3_ctsn */
 450                         AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
 451                 >;
 452         };
 453
 454         mcasp1_pins: mcasp1-pins {
 455                 pinctrl-single,pins = <
 456                         AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)    /* mii1_col.mcasp1_axr2 */
 457                         AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)     /* mii1_crs.mcasp1_aclkx */
 458                         AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)     /* mii1_rxerr.mcasp1_fsx */
 459                         AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)     /* rmii1_ref_clk.mcasp1_axr3 */
 460                 >;
 461         };
 462
 463         mcasp1_sleep_pins: mcasp1-sleep-pins {
 464                 pinctrl-single,pins = <
 465                         AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
 466                         AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 467                         AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
 468                         AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 469                 >;
 470         };
 471
 472         gpio0_pins: gpio0-pins {
 473                 pinctrl-single,pins = <
 474                         AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
 475                 >;
 476         };
 477
 478         emmc_pins_default: emmc-default-pins {
 479                 pinctrl-single,pins = <
 480                         AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
 481                         AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
 482                         AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
 483                         AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
 484                         AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
 485                         AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
 486                         AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
 487                         AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
 488                         AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
 489                         AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
 490                 >;
 491         };
 492
 493         emmc_pins_sleep: emmc-sleep-pins {
 494                 pinctrl-single,pins = <
 495                         AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
 496                         AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
 497                         AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
 498                         AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
 499                         AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
 500                         AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
 501                         AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
 502                         AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
 503                         AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
 504                         AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
 505                 >;
 506         };
 507
 508         beeper_pins_default: beeper-default-pins {
 509                 pinctrl-single,pins = <
 510                         AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7)      /* cam1_field.gpio4_12 */
 511                 >;
 512         };
 513
 514         beeper_pins_sleep: beeper-sleep-pins {
 515                 pinctrl-single,pins = <
 516                         AM4372_IOPAD(0x9e0, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* cam1_field.gpio4_12 */
 517                 >;
 518         };
 519
 520         unused_pins: unused-pins {
 521                 pinctrl-single,pins = <
 522                         AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
 523                         AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
 524                         AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
 525                         AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
 526                         AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
 527                         AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 528                         AM4372_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7)
 529                         AM4372_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE7)
 530                         AM4372_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE7)
 531                         AM4372_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE7)
 532                         AM4372_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 533                         AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
 534                         AM4372_IOPAD(0xa3c, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
 535                         AM4372_IOPAD(0xa40, PIN_INPUT_PULLDOWN | MUX_MODE7)
 536                         AM4372_IOPAD(0xa44, PIN_INPUT_PULLDOWN | MUX_MODE7)
 537                         AM4372_IOPAD(0xa48, PIN_INPUT_PULLDOWN | MUX_MODE7)
 538                         AM4372_IOPAD(0xa4c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 539                         AM4372_IOPAD(0xa50, PIN_INPUT_PULLDOWN | MUX_MODE7)
 540                         AM4372_IOPAD(0xa54, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
 541                         AM4372_IOPAD(0xa58, PIN_INPUT_PULLDOWN | MUX_MODE7)
 542                         AM4372_IOPAD(0xa60, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
 543                         AM4372_IOPAD(0xa68, PIN_INPUT_PULLDOWN | MUX_MODE7)
 544                         AM4372_IOPAD(0xa70, PIN_INPUT_PULLDOWN | MUX_MODE7)
 545                         AM4372_IOPAD(0xa78, PIN_INPUT_PULLDOWN | MUX_MODE7)
 546                         AM4372_IOPAD(0xa7c, PIN_INPUT | PULL_DISABLE)
 547                         AM4372_IOPAD(0xac8, PIN_INPUT_PULLDOWN)
 548                         AM4372_IOPAD(0xad4, PIN_INPUT_PULLDOWN)
 549                         AM4372_IOPAD(0xad8, PIN_INPUT_PULLDOWN | MUX_MODE7)
 550                         AM4372_IOPAD(0xadc, PIN_INPUT_PULLDOWN | MUX_MODE7)
 551                         AM4372_IOPAD(0xae0, PIN_INPUT_PULLDOWN | MUX_MODE7)
 552                         AM4372_IOPAD(0xae4, PIN_INPUT_PULLDOWN | MUX_MODE7)
 553                         AM4372_IOPAD(0xae8, PIN_INPUT_PULLDOWN | MUX_MODE7)
 554                         AM4372_IOPAD(0xaec, PIN_INPUT_PULLDOWN | MUX_MODE7)
 555                         AM4372_IOPAD(0xaf0, PIN_INPUT_PULLDOWN | MUX_MODE7)
 556                         AM4372_IOPAD(0xaf4, PIN_INPUT_PULLDOWN | MUX_MODE7)
 557                         AM4372_IOPAD(0xaf8, PIN_INPUT_PULLDOWN | MUX_MODE7)
 558                         AM4372_IOPAD(0xafc, PIN_INPUT_PULLDOWN | MUX_MODE7)
 559                         AM4372_IOPAD(0xb00, PIN_INPUT_PULLDOWN | MUX_MODE7)
 560                         AM4372_IOPAD(0xb04, PIN_INPUT_PULLDOWN | MUX_MODE7)
 561                         AM4372_IOPAD(0xb08, PIN_INPUT_PULLDOWN | MUX_MODE7)
 562                         AM4372_IOPAD(0xb0c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 563                         AM4372_IOPAD(0xb10, PIN_INPUT_PULLDOWN | MUX_MODE7)
 564                         AM4372_IOPAD(0xb14, PIN_INPUT_PULLDOWN | MUX_MODE7)
 565                         AM4372_IOPAD(0xb18, PIN_INPUT_PULLDOWN | MUX_MODE7)
 566                 >;
 567         };
 568
 569         debugss_pins: debugss-pins {
 570                 pinctrl-single,pins = <
 571                         AM4372_IOPAD(0xa90, PIN_INPUT_PULLDOWN)
 572                         AM4372_IOPAD(0xa94, PIN_INPUT_PULLDOWN)
 573                         AM4372_IOPAD(0xa98, PIN_INPUT_PULLDOWN)
 574                         AM4372_IOPAD(0xa9c, PIN_INPUT_PULLDOWN)
 575                         AM4372_IOPAD(0xaa0, PIN_INPUT_PULLDOWN)
 576                         AM4372_IOPAD(0xaa4, PIN_INPUT_PULLDOWN)
 577                         AM4372_IOPAD(0xaa8, PIN_INPUT_PULLDOWN)
 578                 >;
 579         };
 580
 581         uart0_pins_default: uart0-default-pins {
 582                 pinctrl-single,pins = <
 583                         AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
 584                         AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
 585                         AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
 586                         AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
 587                 >;
 588         };
 589
 590         uart0_pins_sleep: uart0-sleep-pins {
 591                 pinctrl-single,pins = <
 592                         AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_ctsn.uart0_ctsn */
 593                         AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_rtsn.uart0_rtsn */
 594                         AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
 595                         AM4372_IOPAD(0x974, PIN_INPUT_PULLDOWN | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
 596                 >;
 597         };
 598
 599         matrix_keypad_default: matrix-keypad-default-pins {
 600                 pinctrl-single,pins = <
 601                         AM4372_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7)
 602                         AM4372_IOPAD(0x9a8, PIN_OUTPUT | MUX_MODE7)
 603                         AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9)
 604                         AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)
 605                 >;
 606         };
 607
 608         matrix_keypad_sleep: matrix-keypad-sleep-pins {
 609                 pinctrl-single,pins = <
 610                         AM4372_IOPAD(0x9a4, PULL_UP | MUX_MODE7)
 611                         AM4372_IOPAD(0x9a8, PULL_UP | MUX_MODE7)
 612                         AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9)
 613                         AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)
 614                 >;
 615         };
 616 };
 617
 618 &uart0 {
 619         status = "okay";
 620         pinctrl-names = "default", "sleep";
 621         pinctrl-0 = <&uart0_pins_default>;
 622         pinctrl-1 = <&uart0_pins_sleep>;
 623 };
 624
 625 &i2c0 {
 626         status = "okay";
 627         pinctrl-names = "default";
 628         pinctrl-0 = <&i2c0_pins>;
 629         clock-frequency = <100000>;
 630
 631         tps65218: tps65218@24 {
 632                 reg = <0x24>;
 633                 compatible = "ti,tps65218";
 634                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
 635                 interrupt-controller;
 636                 #interrupt-cells = <2>;
 637
 638                 dcdc1: regulator-dcdc1 {
 639                         regulator-name = "vdd_core";
 640                         regulator-min-microvolt = <912000>;
 641                         regulator-max-microvolt = <1144000>;
 642                         regulator-boot-on;
 643                         regulator-always-on;
 644                 };
 645
 646                 dcdc2: regulator-dcdc2 {
 647                         regulator-name = "vdd_mpu";
 648                         regulator-min-microvolt = <912000>;
 649                         regulator-max-microvolt = <1378000>;
 650                         regulator-boot-on;
 651                         regulator-always-on;
 652                 };
 653
 654                 dcdc3: regulator-dcdc3 {
 655                         regulator-name = "vdcdc3";
 656                         regulator-boot-on;
 657                         regulator-always-on;
 658                         regulator-state-mem {
 659                                 regulator-on-in-suspend;
 660                         };
 661                         regulator-state-disk {
 662                                 regulator-off-in-suspend;
 663                         };
 664                 };
 665
 666                 dcdc5: regulator-dcdc5 {
 667                         regulator-name = "v1_0bat";
 668                         regulator-min-microvolt = <1000000>;
 669                         regulator-max-microvolt = <1000000>;
 670                         regulator-boot-on;
 671                         regulator-always-on;
 672                         regulator-state-mem {
 673                                 regulator-on-in-suspend;
 674                         };
 675                 };
 676
 677                 dcdc6: regulator-dcdc6 {
 678                         regulator-name = "v1_8bat";
 679                         regulator-min-microvolt = <1800000>;
 680                         regulator-max-microvolt = <1800000>;
 681                         regulator-boot-on;
 682                         regulator-always-on;
 683                         regulator-state-mem {
 684                                 regulator-on-in-suspend;
 685                         };
 686                 };
 687
 688                 ldo1: regulator-ldo1 {
 689                         regulator-min-microvolt = <1800000>;
 690                         regulator-max-microvolt = <1800000>;
 691                         regulator-boot-on;
 692                         regulator-always-on;
 693                 };
 694         };
 695
 696         ov2659@30 {
 697                 compatible = "ovti,ov2659";
 698                 reg = <0x30>;
 699
 700                 clocks = <&refclk 0>;
 701                 clock-names = "xvclk";
 702
 703                 port {
 704                         ov2659_0: endpoint {
 705                                 remote-endpoint = <&vpfe1_ep>;
 706                                 link-frequencies = /bits/ 64 <70000000>;
 707                         };
 708                 };
 709         };
 710 };
 711
 712 &i2c1 {
 713         status = "okay";
 714         pinctrl-names = "default";
 715         pinctrl-0 = <&i2c1_pins>;
 716         pixcir_ts@5c {
 717                 compatible = "pixcir,pixcir_tangoc";
 718                 pinctrl-names = "default";
 719                 pinctrl-0 = <&pixcir_ts_pins>;
 720                 reg = <0x5c>;
 721
 722                 attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 723
 724                 /*
 725                  * 0x264 represents the offset of padconf register of
 726                  * gpio3_22 from am43xx_pinmux base.
 727                  */
 728                 interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
 729                                       <&am43xx_pinmux 0x264>;
 730                 interrupt-names = "tsc", "wakeup";
 731
 732                 touchscreen-size-x = <1024>;
 733                 touchscreen-size-y = <600>;
 734                 wakeup-source;
 735         };
 736
 737         ov2659@30 {
 738                 compatible = "ovti,ov2659";
 739                 reg = <0x30>;
 740
 741                 clocks = <&refclk 0>;
 742                 clock-names = "xvclk";
 743
 744                 port {
 745                         ov2659_1: endpoint {
 746                                 remote-endpoint = <&vpfe0_ep>;
 747                                 link-frequencies = /bits/ 64 <70000000>;
 748                         };
 749                 };
 750         };
 751
 752         tlv320aic3106: tlv320aic3106@1b {
 753                 #sound-dai-cells = <0>;
 754                 compatible = "ti,tlv320aic3106";
 755                 reg = <0x1b>;
 756                 status = "okay";
 757
 758                 /* Regulators */
 759                 IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */
 760                 AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
 761                 DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
 762                 DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */
 763         };
 764 };
 765
 766 &epwmss0 {
 767         status = "okay";
 768 };
 769
 770 &tscadc {
 771         status = "okay";
 772
 773         adc {
 774                 ti,adc-channels = <0 1 2 3 4 5 6 7>;
 775         };
 776 };
 777
 778 &magadc {
 779         status = "okay";
 780
 781         adc {
 782                 ti,adc-channels = <0 1 2 3 4 5 6 7>;
 783         };
 784 };
 785
 786 &ecap0 {
 787         status = "okay";
 788         pinctrl-names = "default";
 789         pinctrl-0 = <&ecap0_pins>;
 790 };
 791
 792 &gpio0 {
 793         pinctrl-names = "default";
 794         pinctrl-0 = <&gpio0_pins>;
 795         status = "okay";
 796
 797         sel-emmc-nand-hog {
 798                 gpio-hog;
 799                 gpios = <23 GPIO_ACTIVE_HIGH>;
 800                 /* SelEMMCorNAND selects between eMMC and NAND:
 801                  * Low: NAND
 802                  * High: eMMC
 803                  * When changing this line make sure the newly
 804                  * selected device node is enabled and the previously
 805                  * selected device node is disabled.
 806                  */
 807                 output-low;
 808                 line-name = "SelEMMCorNAND";
 809         };
 810 };
 811
 812 &gpio1 {
 813         status = "okay";
 814 };
 815
 816 &gpio3 {
 817         status = "okay";
 818 };
 819
 820 &gpio4 {
 821         status = "okay";
 822 };
 823
 824 &gpio5_target {
 825         ti,no-reset-on-init;
 826 };
 827
 828 &gpio5 {
 829         pinctrl-names = "default";
 830         pinctrl-0 = <&display_mux_pins>;
 831         status = "okay";
 832
 833         sel-lcd-hdmi-hog {
 834                 /*
 835                  * SelLCDorHDMI selects between display and audio paths:
 836                  * Low: HDMI display with audio via HDMI
 837                  * High: LCD display with analog audio via aic3111 codec
 838                  */
 839                 gpio-hog;
 840                 gpios = <8 GPIO_ACTIVE_HIGH>;
 841                 output-high;
 842                 line-name = "SelLCDorHDMI";
 843         };
 844 };
 845
 846 &mmc1 {
 847         status = "okay";
 848         vmmc-supply = <&evm_v3_3d>;
 849         bus-width = <4>;
 850         pinctrl-names = "default";
 851         pinctrl-0 = <&mmc1_pins>;
 852         cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 853 };
 854
 855 /* eMMC sits on mmc2 */
 856 &mmc2 {
 857         /*
 858          * When enabling eMMC, disable GPMC/NAND and set
 859          * SelEMMCorNAND to output-high
 860          */
 861         status = "disabled";
 862         vmmc-supply = <&evm_v3_3d>;
 863         bus-width = <8>;
 864         pinctrl-names = "default", "sleep";
 865         pinctrl-0 = <&emmc_pins_default>;
 866         pinctrl-1 = <&emmc_pins_sleep>;
 867         non-removable;
 868 };
 869
 870 &mmc3 {
 871         status = "okay";
 872         /* these are on the crossbar and are outlined in the
 873            xbar-event-map element */
 874         dmas = <&edma_xbar 30 0 1>,
 875                 <&edma_xbar 31 0 2>;
 876         dma-names = "tx", "rx";
 877         vmmc-supply = <&vmmcwl_fixed>;
 878         bus-width = <4>;
 879         pinctrl-names = "default", "sleep";
 880         pinctrl-0 = <&mmc3_pins_default>;
 881         pinctrl-1 = <&mmc3_pins_sleep>;
 882         cap-power-off-card;
 883         keep-power-in-suspend;
 884         non-removable;
 885
 886         #address-cells = <1>;
 887         #size-cells = <0>;
 888         wlcore: wlcore@0 {
 889                 compatible = "ti,wl1835";
 890                 reg = <2>;
 891                 interrupt-parent = <&gpio1>;
 892                 interrupts = <23 IRQ_TYPE_EDGE_RISING>;
 893         };
 894 };
 895
 896 &uart3 {
 897         status = "okay";
 898         pinctrl-names = "default";
 899         pinctrl-0 = <&uart3_pins>;
 900 };
 901
 902 &usb2_phy1 {
 903         status = "okay";
 904 };
 905
 906 &usb1 {
 907         dr_mode = "otg";
 908         status = "okay";
 909 };
 910
 911 &usb2_phy2 {
 912         status = "okay";
 913 };
 914
 915 &usb2 {
 916         dr_mode = "host";
 917         status = "okay";
 918 };
 919
 920 &mac_sw {
 921         pinctrl-names = "default", "sleep";
 922         pinctrl-0 = <&cpsw_default>;
 923         pinctrl-1 = <&cpsw_sleep>;
 924         status = "okay";
 925 };
 926
 927 &davinci_mdio_sw {
 928         pinctrl-names = "default", "sleep";
 929         pinctrl-0 = <&davinci_mdio_default>;
 930         pinctrl-1 = <&davinci_mdio_sleep>;
 931
 932         ethphy0: ethernet-phy@0 {
 933                 reg = <0>;
 934         };
 935 };
 936
 937 &cpsw_port1 {
 938         phy-handle = <&ethphy0>;
 939         phy-mode = "rgmii-rxid";
 940         ti,dual-emac-pvid = <1>;
 941 };
 942
 943 &cpsw_port2 {
 944         status = "disabled";
 945 };
 946
 947 &elm {
 948         status = "okay";
 949 };
 950
 951 &gpmc {
 952         /*
 953          * When enabling GPMC, disable eMMC and set
 954          * SelEMMCorNAND to output-low
 955          */
 956         status = "okay";
 957         pinctrl-names = "default";
 958         pinctrl-0 = <&nand_flash_x8>;
 959         ranges = <0 0 0x08000000 0x01000000>;   /* CS0 space. Min partition = 16MB */
 960         nand@0,0 {
 961                 compatible = "ti,omap2-nand";
 962                 reg = <0 0 4>;          /* device IO registers */
 963                 interrupt-parent = <&gpmc>;
 964                 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 965                              <1 IRQ_TYPE_NONE>; /* termcount */
 966                 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;  /* gpmc_wait0 */
 967                 ti,nand-xfer-type = "prefetch-dma";
 968                 ti,nand-ecc-opt = "bch16";
 969                 ti,elm-id = <&elm>;
 970                 nand-bus-width = <8>;
 971                 gpmc,device-width = <1>;
 972                 gpmc,sync-clk-ps = <0>;
 973                 gpmc,cs-on-ns = <0>;
 974                 gpmc,cs-rd-off-ns = <40>;
 975                 gpmc,cs-wr-off-ns = <40>;
 976                 gpmc,adv-on-ns = <0>;
 977                 gpmc,adv-rd-off-ns = <25>;
 978                 gpmc,adv-wr-off-ns = <25>;
 979                 gpmc,we-on-ns = <0>;
 980                 gpmc,we-off-ns = <20>;
 981                 gpmc,oe-on-ns = <3>;
 982                 gpmc,oe-off-ns = <30>;
 983                 gpmc,access-ns = <30>;
 984                 gpmc,rd-cycle-ns = <40>;
 985                 gpmc,wr-cycle-ns = <40>;
 986                 gpmc,bus-turnaround-ns = <0>;
 987                 gpmc,cycle2cycle-delay-ns = <0>;
 988                 gpmc,clk-activation-ns = <0>;
 989                 gpmc,wr-access-ns = <40>;
 990                 gpmc,wr-data-mux-bus-ns = <0>;
 991                 /* MTD partition table */
 992                 /* All SPL-* partitions are sized to minimal length
 993                  * which can be independently programmable. For
 994                  * NAND flash this is equal to size of erase-block */
 995                 #address-cells = <1>;
 996                 #size-cells = <1>;
 997                 partition@0 {
 998                         label = "NAND.SPL";
 999                         reg = <0x00000000 0x00040000>;
1000                 };
1001                 partition@1 {
1002                         label = "NAND.SPL.backup1";
1003                         reg = <0x00040000 0x00040000>;
1004                 };
1005                 partition@2 {
1006                         label = "NAND.SPL.backup2";
1007                         reg = <0x00080000 0x00040000>;
1008                 };
1009                 partition@3 {
1010                         label = "NAND.SPL.backup3";
1011                         reg = <0x000c0000 0x00040000>;
1012                 };
1013                 partition@4 {
1014                         label = "NAND.u-boot-spl-os";
1015                         reg = <0x00100000 0x00080000>;
1016                 };
1017                 partition@5 {
1018                         label = "NAND.u-boot";
1019                         reg = <0x00180000 0x00100000>;
1020                 };
1021                 partition@6 {
1022                         label = "NAND.u-boot-env";
1023                         reg = <0x00280000 0x00040000>;
1024                 };
1025                 partition@7 {
1026                         label = "NAND.u-boot-env.backup1";
1027                         reg = <0x002c0000 0x00040000>;
1028                 };
1029                 partition@8 {
1030                         label = "NAND.kernel";
1031                         reg = <0x00300000 0x00700000>;
1032                 };
1033                 partition@9 {
1034                         label = "NAND.file-system";
1035                         reg = <0x00a00000 0x1f600000>;
1036                 };
1037         };
1038 };
1039
1040 &dss {
1041         status = "okay";
1042
1043         pinctrl-names = "default";
1044         pinctrl-0 = <&dss_pins>;
1045
1046         port {
1047                 dpi_out: endpoint {
1048                         remote-endpoint = <&lcd_in>;
1049                         data-lines = <24>;
1050                 };
1051         };
1052 };
1053
1054 &dcan0 {
1055         pinctrl-names = "default", "sleep";
1056         pinctrl-0 = <&dcan0_default>;
1057         pinctrl-1 = <&dcan0_sleep>;
1058         status = "okay";
1059 };
1060
1061 &dcan1 {
1062         pinctrl-names = "default", "sleep";
1063         pinctrl-0 = <&dcan1_default>;
1064         pinctrl-1 = <&dcan1_sleep>;
1065         status = "okay";
1066 };
1067
1068 &vpfe0 {
1069         status = "okay";
1070         pinctrl-names = "default", "sleep";
1071         pinctrl-0 = <&vpfe0_pins_default>;
1072         pinctrl-1 = <&vpfe0_pins_sleep>;
1073
1074         port {
1075                 vpfe0_ep: endpoint {
1076                         remote-endpoint = <&ov2659_1>;
1077                         ti,am437x-vpfe-interface = <0>;
1078                         bus-width = <8>;
1079                         hsync-active = <0>;
1080                         vsync-active = <0>;
1081                 };
1082         };
1083 };
1084
1085 &vpfe1 {
1086         status = "okay";
1087         pinctrl-names = "default", "sleep";
1088         pinctrl-0 = <&vpfe1_pins_default>;
1089         pinctrl-1 = <&vpfe1_pins_sleep>;
1090
1091         port {
1092                 vpfe1_ep: endpoint {
1093                         remote-endpoint = <&ov2659_0>;
1094                         ti,am437x-vpfe-interface = <0>;
1095                         bus-width = <8>;
1096                         hsync-active = <0>;
1097                         vsync-active = <0>;
1098                 };
1099         };
1100 };
1101
1102 &mcasp1 {
1103         #sound-dai-cells = <0>;
1104         pinctrl-names = "default", "sleep";
1105         pinctrl-0 = <&mcasp1_pins>;
1106         pinctrl-1 = <&mcasp1_sleep_pins>;
1107
1108         status = "okay";
1109
1110         op-mode = <0>; /* MCASP_IIS_MODE */
1111         tdm-slots = <2>;
1112         /* 4 serializers */
1113         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
1114                 0 0 1 2
1115         >;
1116         tx-num-evt = <32>;
1117         rx-num-evt = <32>;
1118 };
1119
1120 &rtc {
1121         clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
1122         clock-names = "ext-clk", "int-clk";
1123         status = "okay";
1124 };
1125
1126 &cpu {
1127         cpu0-supply = <&dcdc2>;
1128 };
1129
1130 &wkup_m3_ipc {
1131         ti,set-io-isolation;
1132         firmware-name = "am43x-evm-scale-data.bin";
1133 };
1134
1135 &pruss1_mdio {
1136         status = "disabled";
1137 };