src/arm/ti/omap/omap4-panda-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com/
   4  */
   5 #include <dt-bindings/input/input.h>
   6 #include "elpida_ecb240abacn.dtsi"
   7 #include "omap4-mcpdm.dtsi"
   8
   9 / {
  10         memory@80000000 {
  11                 device_type = "memory";
  12                 reg = <0x80000000 0x40000000>; /* 1 GB */
  13         };
  14
  15         reserved-memory {
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18                 ranges;
  19
  20                 dsp_memory_region: dsp-memory@98000000 {
  21                         compatible = "shared-dma-pool";
  22                         reg = <0x98000000 0x800000>;
  23                         reusable;
  24                         status = "okay";
  25                 };
  26
  27                 ipu_memory_region: ipu-memory@98800000 {
  28                         compatible = "shared-dma-pool";
  29                         reg = <0x98800000 0x7000000>;
  30                         reusable;
  31                         status = "okay";
  32                 };
  33         };
  34
  35         chosen {
  36                 stdout-path = &uart3;
  37         };
  38
  39         aliases {
  40                 display0 = &dvi0;
  41                 display1 = &hdmi0;
  42                 ethernet = &ethernet;
  43         };
  44
  45         leds: leds {
  46                 compatible = "gpio-leds";
  47                 pinctrl-names = "default";
  48                 pinctrl-0 = <
  49                         &led_wkgpio_pins
  50                 >;
  51
  52                 led-heartbeat {
  53                         label = "pandaboard::status1";
  54                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
  55                         linux,default-trigger = "heartbeat";
  56                 };
  57
  58                 led-mmc {
  59                         label = "pandaboard::status2";
  60                         gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
  61                         linux,default-trigger = "mmc0";
  62                 };
  63         };
  64
  65         gpio_keys: gpio_keys {
  66                 compatible = "gpio-keys";
  67                 pinctrl-names = "default";
  68                 pinctrl-0 = <
  69                         &button_pins
  70                 >;
  71
  72                 buttonS2 {
  73                         label = "button S2";
  74                         gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;    /* gpio_121 */
  75                         linux,code = <BTN_0>;
  76                         wakeup-source;
  77                 };
  78         };
  79
  80         sound: sound {
  81                 compatible = "ti,abe-twl6040";
  82                 ti,model = "PandaBoard";
  83
  84                 ti,mclk-freq = <38400000>;
  85
  86                 ti,mcpdm = <&mcpdm>;
  87
  88                 ti,twl6040 = <&twl6040>;
  89
  90                 /* Audio routing */
  91                 ti,audio-routing =
  92                         "Headset Stereophone", "HSOL",
  93                         "Headset Stereophone", "HSOR",
  94                         "Ext Spk", "HFL",
  95                         "Ext Spk", "HFR",
  96                         "Line Out", "AUXL",
  97                         "Line Out", "AUXR",
  98                         "HSMIC", "Headset Mic",
  99                         "Headset Mic", "Headset Mic Bias",
 100                         "AFML", "Line In",
 101                         "AFMR", "Line In";
 102         };
 103
 104         /* HS USB Port 1 Power */
 105         hsusb1_power: hsusb1_power_reg {
 106                 compatible = "regulator-fixed";
 107                 regulator-name = "hsusb1_vbus";
 108                 regulator-min-microvolt = <3300000>;
 109                 regulator-max-microvolt = <3300000>;
 110                 gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;     /* gpio_1 */
 111                 startup-delay-us = <70000>;
 112                 enable-active-high;
 113                 /*
 114                  * boot-on is required along with always-on as the
 115                  * regulator framework doesn't enable the regulator
 116                  * if boot-on is not there.
 117                  */
 118                 regulator-always-on;
 119                 regulator-boot-on;
 120         };
 121
 122         /* HS USB Host PHY on PORT 1 */
 123         hsusb1_phy: hsusb1_phy {
 124                 compatible = "usb-nop-xceiv";
 125                 reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;   /* gpio_62 */
 126                 #phy-cells = <0>;
 127                 vcc-supply = <&hsusb1_power>;
 128                 clocks = <&auxclk3_ck>;
 129                 clock-names = "main_clk";
 130                 clock-frequency = <19200000>;
 131         };
 132
 133         /* regulator for wl12xx on sdio5 */
 134         wl12xx_vmmc: wl12xx_vmmc {
 135                 pinctrl-names = "default";
 136                 pinctrl-0 = <&wl12xx_gpio>;
 137                 compatible = "regulator-fixed";
 138                 regulator-name = "vwl1271";
 139                 regulator-min-microvolt = <1800000>;
 140                 regulator-max-microvolt = <1800000>;
 141                 gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
 142                 startup-delay-us = <70000>;
 143                 enable-active-high;
 144         };
 145
 146         tfp410: encoder0 {
 147                 compatible = "ti,tfp410";
 148                 powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;   /* gpio_0 */
 149
 150                 ports {
 151                         #address-cells = <1>;
 152                         #size-cells = <0>;
 153
 154                         port@0 {
 155                                 reg = <0>;
 156
 157                                 tfp410_in: endpoint {
 158                                         remote-endpoint = <&dpi_out>;
 159                                 };
 160                         };
 161
 162                         port@1 {
 163                                 reg = <1>;
 164
 165                                 tfp410_out: endpoint {
 166                                         remote-endpoint = <&dvi_connector_in>;
 167                                 };
 168                         };
 169                 };
 170         };
 171
 172         dvi0: connector0 {
 173                 compatible = "dvi-connector";
 174                 label = "dvi";
 175
 176                 digital;
 177
 178                 ddc-i2c-bus = <&i2c3>;
 179
 180                 port {
 181                         dvi_connector_in: endpoint {
 182                                 remote-endpoint = <&tfp410_out>;
 183                         };
 184                 };
 185         };
 186
 187         tpd12s015: encoder1 {
 188                 compatible = "ti,tpd12s015";
 189
 190                 gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,   /* 60, CT CP HPD */
 191                         <&gpio2 9 GPIO_ACTIVE_HIGH>,    /* 41, LS OE */
 192                         <&gpio2 31 GPIO_ACTIVE_HIGH>;   /* 63, HPD */
 193
 194                 ports {
 195                         #address-cells = <1>;
 196                         #size-cells = <0>;
 197
 198                         port@0 {
 199                                 reg = <0>;
 200
 201                                 tpd12s015_in: endpoint {
 202                                         remote-endpoint = <&hdmi_out>;
 203                                 };
 204                         };
 205
 206                         port@1 {
 207                                 reg = <1>;
 208
 209                                 tpd12s015_out: endpoint {
 210                                         remote-endpoint = <&hdmi_connector_in>;
 211                                 };
 212                         };
 213                 };
 214         };
 215
 216         hdmi0: connector1 {
 217                 compatible = "hdmi-connector";
 218                 label = "hdmi";
 219
 220                 type = "a";
 221
 222                 port {
 223                         hdmi_connector_in: endpoint {
 224                                 remote-endpoint = <&tpd12s015_out>;
 225                         };
 226                 };
 227         };
 228 };
 229
 230 &omap4_pmx_core {
 231         pinctrl-names = "default";
 232         pinctrl-0 = <
 233                         &dss_dpi_pins
 234                         &tfp410_pins
 235                         &dss_hdmi_pins
 236                         &tpd12s015_pins
 237                         &hsusbb1_pins
 238         >;
 239
 240         twl6040_pins: twl6040-pins {
 241                 pinctrl-single,pins = <
 242                         OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3)      /* hdq_sio.gpio_127 */
 243                         OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0)       /* sys_nirq2.sys_nirq2 */
 244                 >;
 245         };
 246
 247         mcbsp1_pins: mcbsp1-pins {
 248                 pinctrl-single,pins = <
 249                         OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0)               /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
 250                         OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* abe_mcbsp1_dr.abe_mcbsp1_dr */
 251                         OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0)     /* abe_mcbsp1_dx.abe_mcbsp1_dx */
 252                         OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0)               /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
 253                 >;
 254         };
 255
 256         dss_dpi_pins: dss-dpi-pins {
 257                 pinctrl-single,pins = <
 258                         OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data23 */
 259                         OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data22 */
 260                         OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data21 */
 261                         OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data20 */
 262                         OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data19 */
 263                         OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data18 */
 264                         OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data15 */
 265                         OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data14 */
 266                         OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data13 */
 267                         OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data12 */
 268                         OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data11 */
 269
 270                         OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data10 */
 271                         OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data9 */
 272                         OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data16 */
 273                         OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data17 */
 274                         OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5)      /* dispc2_hsync */
 275                         OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5)      /* dispc2_pclk */
 276                         OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5)      /* dispc2_vsync */
 277                         OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5)      /* dispc2_de */
 278                         OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data8 */
 279                         OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data7 */
 280                         OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data6 */
 281                         OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data5 */
 282                         OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data4 */
 283                         OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data3 */
 284
 285                         OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data2 */
 286                         OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data1 */
 287                         OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5)      /* dispc2_data0 */
 288                 >;
 289         };
 290
 291         tfp410_pins: tfp410-pins {
 292                 pinctrl-single,pins = <
 293                         OMAP4_IOPAD(0x184, PIN_OUTPUT | MUX_MODE3)      /* gpio_0 */
 294                 >;
 295         };
 296
 297         dss_hdmi_pins: dss-hdmi-pins {
 298                 pinctrl-single,pins = <
 299                         OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)               /* hdmi_cec.hdmi_cec */
 300                         OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)        /* hdmi_scl.hdmi_scl */
 301                         OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)        /* hdmi_sda.hdmi_sda */
 302                 >;
 303         };
 304
 305         tpd12s015_pins: tpd12s015-pins {
 306                 pinctrl-single,pins = <
 307                         OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3)              /* gpmc_a17.gpio_41 */
 308                         OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)              /* gpmc_nbe1.gpio_60 */
 309                         OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3)      /* hdmi_hpd.gpio_63 */
 310                 >;
 311         };
 312
 313         hsusbb1_pins: hsusbb1-pins {
 314                 pinctrl-single,pins = <
 315                         OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
 316                         OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4)              /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
 317                         OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
 318                         OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
 319                         OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
 320                         OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
 321                         OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
 322                         OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
 323                         OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
 324                         OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
 325                         OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
 326                         OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4)      /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
 327                 >;
 328         };
 329
 330         i2c1_pins: i2c1-pins {
 331                 pinctrl-single,pins = <
 332                         OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c1_scl */
 333                         OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c1_sda */
 334                 >;
 335         };
 336
 337         i2c2_pins: i2c2-pins {
 338                 pinctrl-single,pins = <
 339                         OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c2_scl */
 340                         OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c2_sda */
 341                 >;
 342         };
 343
 344         i2c3_pins: i2c3-pins {
 345                 pinctrl-single,pins = <
 346                         OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c3_scl */
 347                         OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c3_sda */
 348                 >;
 349         };
 350
 351         i2c4_pins: i2c4-pins {
 352                 pinctrl-single,pins = <
 353                         OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c4_scl */
 354                         OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)        /* i2c4_sda */
 355                 >;
 356         };
 357
 358         /*
 359          * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
 360          * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
 361          */
 362         wl12xx_gpio: wl12xx-gpio-pins {
 363                 pinctrl-single,pins = <
 364                         OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3)              /* gpmc_a19.gpio_43 */
 365                         OMAP4_IOPAD(0x06c, PIN_OUTPUT | MUX_MODE3)              /* gpmc_a22.gpio_46 */
 366                         OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLUP | MUX_MODE3)       /* gpmc_a24.gpio_48 */
 367                         OMAP4_IOPAD(0x072, PIN_OUTPUT_PULLUP | MUX_MODE3)       /* gpmc_a25.gpio_49 */
 368                 >;
 369         };
 370
 371         /* wl12xx GPIO inputs and SDIO pins */
 372         wl12xx_pins: wl12xx-pins {
 373                 pinctrl-single,pins = <
 374                         OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)               /* gpmc_ncs2.gpio_52 */
 375                         OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)               /* gpmc_ncs3.gpio_53 */
 376                         OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0)        /* sdmmc5_clk.sdmmc5_clk */
 377                         OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)        /* sdmmc5_cmd.sdmmc5_cmd */
 378                         OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)        /* sdmmc5_dat0.sdmmc5_dat0 */
 379                         OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)        /* sdmmc5_dat1.sdmmc5_dat1 */
 380                         OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)        /* sdmmc5_dat2.sdmmc5_dat2 */
 381                         OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)        /* sdmmc5_dat3.sdmmc5_dat3 */
 382                 >;
 383         };
 384
 385         button_pins: button-pins {
 386                 pinctrl-single,pins = <
 387                         OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)        /* gpio_121 */
 388                 >;
 389         };
 390 };
 391
 392 &omap4_pmx_wkup {
 393         led_wkgpio_pins: leds-wkpins-pins {
 394                 pinctrl-single,pins = <
 395                         OMAP4_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE3)      /* gpio_wk7 */
 396                         OMAP4_IOPAD(0x05c, PIN_OUTPUT | MUX_MODE3)      /* gpio_wk8 */
 397                 >;
 398         };
 399 };
 400
 401 &i2c1 {
 402         pinctrl-names = "default";
 403         pinctrl-0 = <&i2c1_pins>;
 404
 405         clock-frequency = <400000>;
 406
 407         twl: twl@48 {
 408                 reg = <0x48>;
 409                 /* IRQ# = 7 */
 410                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
 411         };
 412
 413         twl6040: twl@4b {
 414                 compatible = "ti,twl6040";
 415                 #clock-cells = <0>;
 416                 reg = <0x4b>;
 417
 418                 pinctrl-names = "default";
 419                 pinctrl-0 = <&twl6040_pins>;
 420
 421                 /* IRQ# = 119 */
 422                 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
 423                 ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
 424
 425                 vio-supply = <&v1v8>;
 426                 v2v1-supply = <&v2v1>;
 427                 enable-active-high;
 428         };
 429 };
 430
 431 #include "twl6030.dtsi"
 432 #include "twl6030_omap4.dtsi"
 433
 434 &i2c2 {
 435         pinctrl-names = "default";
 436         pinctrl-0 = <&i2c2_pins>;
 437
 438         clock-frequency = <400000>;
 439 };
 440
 441 &i2c3 {
 442         pinctrl-names = "default";
 443         pinctrl-0 = <&i2c3_pins>;
 444
 445         clock-frequency = <100000>;
 446
 447         /*
 448          * Display monitor features are burnt in their EEPROM as EDID data.
 449          * The EEPROM is connected as I2C slave device.
 450          */
 451         eeprom@50 {
 452                 compatible = "ti,eeprom";
 453                 reg = <0x50>;
 454         };
 455 };
 456
 457 &i2c4 {
 458         pinctrl-names = "default";
 459         pinctrl-0 = <&i2c4_pins>;
 460
 461         clock-frequency = <400000>;
 462 };
 463
 464 &mmc1 {
 465         vmmc-supply = <&vmmc>;
 466         bus-width = <8>;
 467 };
 468
 469 &mmc2 {
 470         status = "disabled";
 471 };
 472
 473 &mmc3 {
 474         status = "disabled";
 475 };
 476
 477 &mmc4 {
 478         status = "disabled";
 479 };
 480
 481 &mmc5 {
 482         pinctrl-names = "default";
 483         pinctrl-0 = <&wl12xx_pins>;
 484         vmmc-supply = <&wl12xx_vmmc>;
 485         interrupts-extended = <&wakeupgen GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH
 486                                &omap4_pmx_core 0x10e>;
 487         non-removable;
 488         bus-width = <4>;
 489         cap-power-off-card;
 490
 491         #address-cells = <1>;
 492         #size-cells = <0>;
 493         wlcore: wlcore@2 {
 494                 compatible = "ti,wl1271";
 495                 reg = <2>;
 496                 /* gpio_53 with gpmc_ncs3 pad as wakeup */
 497                 interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>,
 498                                       <&omap4_pmx_core 0x3a>;
 499                 interrupt-names = "irq", "wakeup";
 500                 ref-clock-frequency = <38400000>;
 501         };
 502 };
 503
 504 &emif1 {
 505         cs1-used;
 506         device-handle = <&elpida_ECB240ABACN>;
 507 };
 508
 509 &emif2 {
 510         cs1-used;
 511         device-handle = <&elpida_ECB240ABACN>;
 512 };
 513
 514 &mcbsp1 {
 515         pinctrl-names = "default";
 516         pinctrl-0 = <&mcbsp1_pins>;
 517         status = "okay";
 518 };
 519
 520 &twl_usb_comparator {
 521         usb-supply = <&vusb>;
 522 };
 523
 524 &uart2 {
 525         interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
 526                                &omap4_pmx_core OMAP4_UART2_RX>;
 527 };
 528
 529 &uart3 {
 530         interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
 531                                &omap4_pmx_core OMAP4_UART3_RX>;
 532 };
 533
 534 &uart4 {
 535         interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
 536                                &omap4_pmx_core OMAP4_UART4_RX>;
 537 };
 538
 539 &usb_otg_hs {
 540         interface-type = <1>;
 541         mode = <3>;
 542         power = <50>;
 543 };
 544
 545 &usbhshost {
 546         port1-mode = "ehci-phy";
 547 };
 548
 549 &usbhsehci {
 550         phys = <&hsusb1_phy>;
 551
 552         #address-cells = <1>;
 553         #size-cells = <0>;
 554
 555         hub@1 {
 556                 compatible = "usb424,9514";
 557                 reg = <1>;
 558                 #address-cells = <1>;
 559                 #size-cells = <0>;
 560
 561                 ethernet: ethernet@1 {
 562                         compatible = "usb424,ec00";
 563                         reg = <1>;
 564                 };
 565         };
 566 };
 567
 568 &dss {
 569         status = "okay";
 570
 571         port {
 572                 dpi_out: endpoint {
 573                         remote-endpoint = <&tfp410_in>;
 574                         data-lines = <24>;
 575                 };
 576         };
 577 };
 578
 579 &dsi2 {
 580         status = "okay";
 581         vdd-supply = <&vcxio>;
 582 };
 583
 584 &hdmi {
 585         status = "okay";
 586         vdda-supply = <&vdac>;
 587
 588         port {
 589                 hdmi_out: endpoint {
 590                         remote-endpoint = <&tpd12s015_in>;
 591                 };
 592         };
 593 };
 594
 595 &dsp {
 596         status = "okay";
 597         memory-region = <&dsp_memory_region>;
 598         ti,timers = <&timer5>;
 599         ti,watchdog-timers = <&timer6>;
 600 };
 601
 602 &ipu {
 603         status = "okay";
 604         memory-region = <&ipu_memory_region>;
 605         ti,timers = <&timer3>;
 606         ti,watchdog-timers = <&timer9>, <&timer11>;
 607 };