src/arm64/freescale/fsl-ls1028a-qds.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree file for NXP LS1028A QDS Board.
   4  *
   5  * Copyright 2018 NXP
   6  *
   7  * Harninder Rai <harninder.rai@nxp.com>
   8  *
   9  */
  10
  11 /dts-v1/;
  12
  13 #include "fsl-ls1028a.dtsi"
  14
  15 / {
  16         model = "LS1028A QDS Board";
  17         compatible = "fsl,ls1028a-qds", "fsl,ls1028a";
  18
  19         aliases {
  20                 crypto = &crypto;
  21                 gpio0 = &gpio1;
  22                 gpio1 = &gpio2;
  23                 gpio2 = &gpio3;
  24                 serial0 = &duart0;
  25                 serial1 = &duart1;
  26                 mmc0 = &esdhc;
  27                 mmc1 = &esdhc1;
  28                 rtc1 = &ftm_alarm1;
  29         };
  30
  31         chosen {
  32                 stdout-path = "serial0:115200n8";
  33         };
  34
  35         memory@80000000 {
  36                 device_type = "memory";
  37                 reg = <0x0 0x80000000 0x1 0x00000000>;
  38         };
  39
  40         sys_mclk: clock-mclk {
  41                 compatible = "fixed-clock";
  42                 #clock-cells = <0>;
  43                 clock-frequency = <25000000>;
  44         };
  45
  46         reg_1p8v: regulator-1p8v {
  47                 compatible = "regulator-fixed";
  48                 regulator-name = "1P8V";
  49                 regulator-min-microvolt = <1800000>;
  50                 regulator-max-microvolt = <1800000>;
  51                 regulator-always-on;
  52         };
  53
  54         sb_3v3: regulator-sb3v3 {
  55                 compatible = "regulator-fixed";
  56                 regulator-name = "3v3_vbus";
  57                 regulator-min-microvolt = <3300000>;
  58                 regulator-max-microvolt = <3300000>;
  59                 regulator-boot-on;
  60                 regulator-always-on;
  61         };
  62
  63         sound {
  64                 compatible = "simple-audio-card";
  65                 simple-audio-card,format = "i2s";
  66                 simple-audio-card,widgets =
  67                         "Microphone", "Microphone Jack",
  68                         "Headphone", "Headphone Jack",
  69                         "Speaker", "Speaker Ext",
  70                         "Line", "Line In Jack";
  71                 simple-audio-card,routing =
  72                         "MIC_IN", "Microphone Jack",
  73                         "Microphone Jack", "Mic Bias",
  74                         "LINE_IN", "Line In Jack",
  75                         "Headphone Jack", "HP_OUT",
  76                         "Speaker Ext", "LINE_OUT";
  77
  78                 simple-audio-card,cpu {
  79                         sound-dai = <&sai1>;
  80                         frame-master;
  81                         bitclock-master;
  82                 };
  83
  84                 simple-audio-card,codec {
  85                         sound-dai = <&sgtl5000>;
  86                         frame-master;
  87                         bitclock-master;
  88                         system-clock-frequency = <25000000>;
  89                 };
  90         };
  91
  92         mdio-mux {
  93                 compatible = "mdio-mux-multiplexer";
  94                 mux-controls = <&mux 0>;
  95                 mdio-parent-bus = <&enetc_mdio_pf3>;
  96                 #address-cells = <1>;
  97                 #size-cells = <0>;
  98
  99                 /* on-board RGMII PHY */
 100                 mdio@0 {
 101                         #address-cells = <1>;
 102                         #size-cells = <0>;
 103                         reg = <0>;
 104
 105                         qds_phy1: ethernet-phy@5 {
 106                                 /* Atheros 8035 */
 107                                 reg = <5>;
 108                         };
 109                 };
 110
 111                 mdio_slot1: mdio@4 {
 112                         #address-cells = <1>;
 113                         #size-cells = <0>;
 114                         reg = <4>;
 115                 };
 116
 117                 mdio_slot2: mdio@5 {
 118                         #address-cells = <1>;
 119                         #size-cells = <0>;
 120                         reg = <5>;
 121                 };
 122
 123                 mdio_slot3: mdio@6 {
 124                         #address-cells = <1>;
 125                         #size-cells = <0>;
 126                         reg = <6>;
 127                 };
 128
 129                 mdio_slot4: mdio@7 {
 130                         #address-cells = <1>;
 131                         #size-cells = <0>;
 132                         reg = <7>;
 133                 };
 134         };
 135 };
 136
 137 &can0 {
 138         status = "okay";
 139 };
 140
 141 &can1 {
 142         status = "okay";
 143 };
 144
 145 &dspi0 {
 146         bus-num = <0>;
 147         status = "okay";
 148
 149         flash@0 {
 150                 #address-cells = <1>;
 151                 #size-cells = <1>;
 152                 compatible = "jedec,spi-nor";
 153                 spi-cpol;
 154                 spi-cpha;
 155                 reg = <0>;
 156                 spi-max-frequency = <10000000>;
 157         };
 158
 159         flash@1 {
 160                 #address-cells = <1>;
 161                 #size-cells = <1>;
 162                 compatible = "jedec,spi-nor";
 163                 spi-cpol;
 164                 spi-cpha;
 165                 reg = <1>;
 166                 spi-max-frequency = <10000000>;
 167         };
 168
 169         flash@2 {
 170                 #address-cells = <1>;
 171                 #size-cells = <1>;
 172                 compatible = "jedec,spi-nor";
 173                 spi-cpol;
 174                 spi-cpha;
 175                 reg = <2>;
 176                 spi-max-frequency = <10000000>;
 177         };
 178 };
 179
 180 &dspi1 {
 181         bus-num = <1>;
 182         status = "okay";
 183
 184         flash@0 {
 185                 #address-cells = <1>;
 186                 #size-cells = <1>;
 187                 compatible = "jedec,spi-nor";
 188                 spi-cpol;
 189                 spi-cpha;
 190                 reg = <0>;
 191                 spi-max-frequency = <10000000>;
 192         };
 193
 194         flash@1 {
 195                 #address-cells = <1>;
 196                 #size-cells = <1>;
 197                 compatible = "jedec,spi-nor";
 198                 spi-cpol;
 199                 spi-cpha;
 200                 reg = <1>;
 201                 spi-max-frequency = <10000000>;
 202         };
 203
 204         flash@2 {
 205                 #address-cells = <1>;
 206                 #size-cells = <1>;
 207                 compatible = "jedec,spi-nor";
 208                 spi-cpol;
 209                 spi-cpha;
 210                 reg = <2>;
 211                 spi-max-frequency = <10000000>;
 212         };
 213 };
 214
 215 &dspi2 {
 216         bus-num = <2>;
 217         status = "okay";
 218
 219         flash@0 {
 220                 #address-cells = <1>;
 221                 #size-cells = <1>;
 222                 compatible = "jedec,spi-nor";
 223                 spi-cpol;
 224                 spi-cpha;
 225                 reg = <0>;
 226                 spi-max-frequency = <10000000>;
 227         };
 228 };
 229
 230 &duart0 {
 231         status = "okay";
 232 };
 233
 234 &duart1 {
 235         status = "okay";
 236 };
 237
 238 &enetc_port1 {
 239         phy-handle = <&qds_phy1>;
 240         phy-mode = "rgmii-id";
 241         status = "okay";
 242 };
 243
 244 &enetc_port2 {
 245         status = "okay";
 246 };
 247
 248 &esdhc {
 249         status = "okay";
 250 };
 251
 252 &esdhc1 {
 253         status = "okay";
 254 };
 255
 256 &fspi {
 257         status = "okay";
 258
 259         mt35xu02g0: flash@0 {
 260                 compatible = "jedec,spi-nor";
 261                 #address-cells = <1>;
 262                 #size-cells = <1>;
 263                 spi-max-frequency = <50000000>;
 264                 /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
 265                 spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
 266                 spi-tx-bus-width = <1>; /* 1 SPI Tx line */
 267                 reg = <0>;
 268         };
 269 };
 270
 271 &ftm_alarm1 {
 272         status = "okay";
 273 };
 274
 275 &i2c0 {
 276         status = "okay";
 277
 278         i2c-mux@77 {
 279                 compatible = "nxp,pca9547";
 280                 reg = <0x77>;
 281                 #address-cells = <1>;
 282                 #size-cells = <0>;
 283
 284                 i2c@2 {
 285                         #address-cells = <1>;
 286                         #size-cells = <0>;
 287                         reg = <0x2>;
 288
 289                         current-monitor@40 {
 290                                 compatible = "ti,ina220";
 291                                 reg = <0x40>;
 292                                 shunt-resistor = <1000>;
 293                         };
 294
 295                         current-monitor@41 {
 296                                 compatible = "ti,ina220";
 297                                 reg = <0x41>;
 298                                 shunt-resistor = <1000>;
 299                         };
 300                 };
 301
 302                 i2c@3 {
 303                         #address-cells = <1>;
 304                         #size-cells = <0>;
 305                         reg = <0x3>;
 306
 307                         temperature-sensor@4c {
 308                                 compatible = "nxp,sa56004";
 309                                 reg = <0x4c>;
 310                                 vcc-supply = <&sb_3v3>;
 311                         };
 312
 313                         eeprom@56 {
 314                                 compatible = "atmel,24c512";
 315                                 reg = <0x56>;
 316                         };
 317
 318                         eeprom@57 {
 319                                 compatible = "atmel,24c512";
 320                                 reg = <0x57>;
 321                         };
 322                 };
 323
 324                 i2c@5 {
 325                         #address-cells = <1>;
 326                         #size-cells = <0>;
 327                         reg = <0x5>;
 328
 329                         sgtl5000: audio-codec@a {
 330                                 #sound-dai-cells = <0>;
 331                                 compatible = "fsl,sgtl5000";
 332                                 reg = <0xa>;
 333                                 VDDA-supply = <&reg_1p8v>;
 334                                 VDDIO-supply = <&reg_1p8v>;
 335                                 clocks = <&sys_mclk>;
 336                         };
 337                 };
 338         };
 339
 340         fpga@66 {
 341                 compatible = "fsl,ls1028aqds-fpga", "fsl,fpga-qixis-i2c",
 342                              "simple-mfd";
 343                 reg = <0x66>;
 344
 345                 mux: mux-controller {
 346                         compatible = "reg-mux";
 347                         #mux-control-cells = <1>;
 348                         mux-reg-masks = <0x54 0xf0>; /* 0: reg 0x54, bits 7:4 */
 349                 };
 350         };
 351
 352 };
 353
 354 &i2c1 {
 355         status = "okay";
 356
 357         rtc@51 {
 358                 compatible = "nxp,pcf2129";
 359                 reg = <0x51>;
 360         };
 361 };
 362
 363 &lpuart0 {
 364         status = "okay";
 365 };
 366
 367 &lpuart1 {
 368         status = "okay";
 369 };
 370
 371 &mscc_felix_port4 {
 372         ethernet = <&enetc_port2>;
 373         status = "okay";
 374 };
 375
 376 &sai1 {
 377         status = "okay";
 378 };
 379
 380 &sata {
 381         status = "okay";
 382 };
 383
 384 &usb0 {
 385         dr_mode = "host";
 386         status = "okay";
 387 };
 388
 389 &usb1 {
 390         dr_mode = "host";
 391         status = "okay";
 392 };