src/arm64/freescale/imx8mn-var-som-symphony.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Supports Symphony evaluation board versions >= 1.4a.
   4  *
   5  * Copyright 2019-2020 Variscite Ltd.
   6  * Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
   7  */
   8
   9 /dts-v1/;
  10
  11 #include <dt-bindings/usb/pd.h>
  12 #include "imx8mn-var-som.dtsi"
  13
  14 / {
  15         model = "Variscite VAR-SOM-MX8MN Symphony evaluation board";
  16         compatible = "variscite,var-som-mx8mn-symphony", "variscite,var-som-mx8mn", "fsl,imx8mn";
  17
  18         reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
  19                 compatible = "regulator-fixed";
  20                 pinctrl-names = "default";
  21                 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
  22                 regulator-name = "VSD_3V3";
  23                 regulator-min-microvolt = <3300000>;
  24                 regulator-max-microvolt = <3300000>;
  25                 gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
  26                 enable-active-high;
  27         };
  28
  29         gpio-keys {
  30                 compatible = "gpio-keys";
  31
  32                 key-back {
  33                         label = "Back";
  34                         gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
  35                         linux,code = <KEY_BACK>;
  36                 };
  37
  38                 key-home {
  39                         label = "Home";
  40                         gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
  41                         linux,code = <KEY_HOME>;
  42                 };
  43
  44                 key-menu {
  45                         label = "Menu";
  46                         gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_MENU>;
  48                 };
  49         };
  50
  51         leds {
  52                 compatible = "gpio-leds";
  53
  54                 led {
  55                         label = "Heartbeat";
  56                         gpios = <&pca9534 0 GPIO_ACTIVE_LOW>;
  57                         linux,default-trigger = "heartbeat";
  58                 };
  59         };
  60 };
  61
  62 &ethphy {
  63         reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>;
  64 };
  65
  66 &i2c2 {
  67         clock-frequency = <400000>;
  68         pinctrl-names = "default";
  69         pinctrl-0 = <&pinctrl_i2c2>;
  70         status = "okay";
  71
  72         pca9534: gpio@20 {
  73                 compatible = "nxp,pca9534";
  74                 reg = <0x20>;
  75                 gpio-controller;
  76                 pinctrl-names = "default";
  77                 pinctrl-0 = <&pinctrl_pca9534>;
  78                 interrupt-parent = <&gpio1>;
  79                 interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
  80                 #gpio-cells = <2>;
  81                 wakeup-source;
  82
  83                 /* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */
  84                 usb3-sata-sel-hog {
  85                         gpio-hog;
  86                         gpios = <4 GPIO_ACTIVE_HIGH>;
  87                         output-low;
  88                         line-name = "usb3_sata_sel";
  89                 };
  90
  91                 som-vselect-hog {
  92                         gpio-hog;
  93                         gpios = <6 GPIO_ACTIVE_HIGH>;
  94                         output-low;
  95                         line-name = "som_vselect";
  96                 };
  97
  98                 enet-sel-hog {
  99                         gpio-hog;
 100                         gpios = <7 GPIO_ACTIVE_HIGH>;
 101                         output-low;
 102                         line-name = "enet_sel";
 103                 };
 104         };
 105
 106         /*
 107          * For Symphony board version <= 1.4, the PTN5150 IRQ pin is connected
 108          * to GPIO1_IO11 on the SoM (R106 present, R132 absent). From Symphony
 109          * board version >= 1.4a, the PTN5150 ID pin is connected to GPIO1_IO11
 110          * on the SoM (R106 absent, R132 present).
 111          */
 112         extcon_usbotg1: typec@3d {
 113                 compatible = "nxp,ptn5150";
 114                 reg = <0x3d>;
 115                 interrupt-parent = <&gpio1>;
 116                 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 117                 pinctrl-names = "default";
 118                 pinctrl-0 = <&pinctrl_ptn5150>;
 119                 status = "okay";
 120
 121                 port {
 122                         typec1_dr_sw: endpoint {
 123                                 remote-endpoint = <&usb1_drd_sw>;
 124                         };
 125                 };
 126         };
 127 };
 128
 129 &i2c3 {
 130         /* Capacitive touch controller */
 131         ft5x06_ts: touchscreen@38 {
 132                 compatible = "edt,edt-ft5406";
 133                 reg = <0x38>;
 134                 pinctrl-names = "default";
 135                 pinctrl-0 = <&pinctrl_captouch>;
 136                 interrupt-parent = <&gpio5>;
 137                 interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 138
 139                 touchscreen-size-x = <800>;
 140                 touchscreen-size-y = <480>;
 141                 touchscreen-inverted-x;
 142                 touchscreen-inverted-y;
 143         };
 144
 145         rtc@68 {
 146                 compatible = "dallas,ds1337";
 147                 reg = <0x68>;
 148         };
 149 };
 150
 151 /* Header */
 152 &uart1 {
 153         pinctrl-names = "default";
 154         pinctrl-0 = <&pinctrl_uart1>;
 155         status = "okay";
 156 };
 157
 158 /* Header */
 159 &uart3 {
 160         pinctrl-names = "default";
 161         pinctrl-0 = <&pinctrl_uart3>;
 162         status = "okay";
 163 };
 164
 165 &usbotg1 {
 166         dr_mode = "otg";
 167         hnp-disable;
 168         srp-disable;
 169         adp-disable;
 170         usb-role-switch;
 171         disable-over-current;
 172         samsung,picophy-pre-emp-curr-control = <3>;
 173         samsung,picophy-dc-vol-level-adjust = <7>;
 174         status = "okay";
 175
 176         port {
 177                 usb1_drd_sw: endpoint {
 178                         remote-endpoint = <&typec1_dr_sw>;
 179                 };
 180         };
 181 };
 182
 183 &iomuxc {
 184         pinctrl_captouch: captouchgrp {
 185                 fsl,pins = <
 186                         MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4         0x16
 187                 >;
 188         };
 189
 190         pinctrl_i2c2: i2c2grp {
 191                 fsl,pins = <
 192                         MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL          0x400001c3
 193                         MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA          0x400001c3
 194                 >;
 195         };
 196
 197         pinctrl_pca9534: pca9534grp {
 198                 fsl,pins = <
 199                         MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7       0x16
 200                 >;
 201         };
 202
 203         pinctrl_ptn5150: ptn5150grp {
 204                 fsl,pins = <
 205                         MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11      0x16
 206                 >;
 207         };
 208
 209         pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 210                 fsl,pins = <
 211                         MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22        0x41
 212                 >;
 213         };
 214
 215         pinctrl_uart1: uart1grp {
 216                 fsl,pins = <
 217                         MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX     0x140
 218                         MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX     0x140
 219                 >;
 220         };
 221
 222         pinctrl_uart3: uart3grp {
 223                 fsl,pins = <
 224                         MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX     0x140
 225                         MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX     0x140
 226                 >;
 227         };
 228 };