src/arm64/lg/lg1312.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * dts file for lg1312 SoC
   4  *
   5  * Copyright (C) 2016, LG Electronics
   6  */
   7
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/interrupt-controller/arm-gic.h>
  10
  11 / {
  12         #address-cells = <2>;
  13         #size-cells = <2>;
  14
  15         compatible = "lge,lg1312";
  16         interrupt-parent = <&gic>;
  17
  18         cpus {
  19                 #address-cells = <2>;
  20                 #size-cells = <0>;
  21
  22                 cpu0: cpu@0 {
  23                         device_type = "cpu";
  24                         compatible = "arm,cortex-a53";
  25                         reg = <0x0 0x0>;
  26                         next-level-cache = <&L2_0>;
  27                 };
  28                 cpu1: cpu@1 {
  29                         device_type = "cpu";
  30                         compatible = "arm,cortex-a53";
  31                         reg = <0x0 0x1>;
  32                         enable-method = "psci";
  33                         next-level-cache = <&L2_0>;
  34                 };
  35                 cpu2: cpu@2 {
  36                         device_type = "cpu";
  37                         compatible = "arm,cortex-a53";
  38                         reg = <0x0 0x2>;
  39                         enable-method = "psci";
  40                         next-level-cache = <&L2_0>;
  41                 };
  42                 cpu3: cpu@3 {
  43                         device_type = "cpu";
  44                         compatible = "arm,cortex-a53";
  45                         reg = <0x0 0x3>;
  46                         enable-method = "psci";
  47                         next-level-cache = <&L2_0>;
  48                 };
  49                 L2_0: l2-cache0 {
  50                         compatible = "cache";
  51                         cache-level = <2>;
  52                         cache-unified;
  53                 };
  54         };
  55
  56         psci {
  57                 compatible = "arm,psci-0.2", "arm,psci";
  58                 method = "smc";
  59                 cpu_suspend = <0x84000001>;
  60                 cpu_off = <0x84000002>;
  61                 cpu_on = <0x84000003>;
  62         };
  63
  64         gic: interrupt-controller@c0001000 {
  65                 #interrupt-cells = <3>;
  66                 compatible = "arm,gic-400";
  67                 interrupt-controller;
  68                 reg = <0x0 0xc0001000 0x1000>,
  69                       <0x0 0xc0002000 0x2000>,
  70                       <0x0 0xc0004000 0x2000>,
  71                       <0x0 0xc0006000 0x2000>;
  72         };
  73
  74         pmu {
  75                 compatible = "arm,cortex-a53-pmu";
  76                 interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
  77                              <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
  78                              <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
  79                              <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
  80                 interrupt-affinity = <&cpu0>,
  81                                      <&cpu1>,
  82                                      <&cpu2>,
  83                                      <&cpu3>;
  84         };
  85
  86         timer {
  87                 compatible = "arm,armv8-timer";
  88                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
  89                               IRQ_TYPE_LEVEL_LOW)>,
  90                              <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
  91                               IRQ_TYPE_LEVEL_LOW)>,
  92                              <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
  93                               IRQ_TYPE_LEVEL_LOW)>,
  94                              <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
  95                               IRQ_TYPE_LEVEL_LOW)>;
  96         };
  97
  98         clk_bus: clk_bus {
  99                 #clock-cells = <0>;
 100
 101                 compatible = "fixed-clock";
 102                 clock-frequency = <198000000>;
 103                 clock-output-names = "BUSCLK";
 104         };
 105
 106         soc {
 107                 #address-cells = <2>;
 108                 #size-cells = <1>;
 109
 110                 compatible = "simple-bus";
 111                 interrupt-parent = <&gic>;
 112                 ranges;
 113
 114                 eth0: ethernet@c1b00000 {
 115                         compatible = "cdns,gem";
 116                         reg = <0x0 0xc1b00000 0x1000>;
 117                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 118                         clocks = <&clk_bus>, <&clk_bus>;
 119                         clock-names = "hclk", "pclk";
 120                         phy-mode = "rmii";
 121                         /* Filled in by boot */
 122                         mac-address = [ 00 00 00 00 00 00 ];
 123                 };
 124         };
 125
 126         amba {
 127                 #address-cells = <2>;
 128                 #size-cells = <1>;
 129                 #interrupt-cells = <3>;
 130
 131                 compatible = "simple-bus";
 132                 interrupt-parent = <&gic>;
 133                 ranges;
 134
 135                 timers: timer@fd100000 {
 136                         compatible = "arm,sp804", "arm,primecell";
 137                         reg = <0x0 0xfd100000 0x1000>;
 138                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 139                         clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>;
 140                         clock-names = "timer0clk", "timer1clk", "apb_pclk";
 141                 };
 142                 wdog: watchdog@fd200000 {
 143                         compatible = "arm,sp805", "arm,primecell";
 144                         reg = <0x0 0xfd200000 0x1000>;
 145                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 146                         clocks = <&clk_bus>, <&clk_bus>;
 147                         clock-names = "wdog_clk", "apb_pclk";
 148                 };
 149                 uart0: serial@fe000000 {
 150                         compatible = "arm,pl011", "arm,primecell";
 151                         reg = <0x0 0xfe000000 0x1000>;
 152                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 153                         clocks = <&clk_bus>;
 154                         clock-names = "apb_pclk";
 155                         status = "disabled";
 156                 };
 157                 uart1: serial@fe100000 {
 158                         compatible = "arm,pl011", "arm,primecell";
 159                         reg = <0x0 0xfe100000 0x1000>;
 160                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 161                         clocks = <&clk_bus>;
 162                         clock-names = "apb_pclk";
 163                         status = "disabled";
 164                 };
 165                 uart2: serial@fe200000 {
 166                         compatible = "arm,pl011", "arm,primecell";
 167                         reg = <0x0 0xfe200000 0x1000>;
 168                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 169                         clocks = <&clk_bus>;
 170                         clock-names = "apb_pclk";
 171                         status = "disabled";
 172                 };
 173                 spi0: spi@fe800000 {
 174                         compatible = "arm,pl022", "arm,primecell";
 175                         reg = <0x0 0xfe800000 0x1000>;
 176                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 177                         clocks = <&clk_bus>;
 178                         clock-names = "apb_pclk";
 179                 };
 180                 spi1: spi@fe900000 {
 181                         compatible = "arm,pl022", "arm,primecell";
 182                         reg = <0x0 0xfe900000 0x1000>;
 183                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 184                         clocks = <&clk_bus>;
 185                         clock-names = "apb_pclk";
 186                 };
 187                 dmac0: dma-controller@c1128000 {
 188                         compatible = "arm,pl330", "arm,primecell";
 189                         reg = <0x0 0xc1128000 0x1000>;
 190                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 191                         clocks = <&clk_bus>;
 192                         clock-names = "apb_pclk";
 193                         #dma-cells = <1>;
 194                 };
 195                 gpio0: gpio@fd400000 {
 196                         #gpio-cells = <2>;
 197                         compatible = "arm,pl061", "arm,primecell";
 198                         gpio-controller;
 199                         reg = <0x0 0xfd400000 0x1000>;
 200                         clocks = <&clk_bus>;
 201                         clock-names = "apb_pclk";
 202                         status = "disabled";
 203                 };
 204                 gpio1: gpio@fd410000 {
 205                         #gpio-cells = <2>;
 206                         compatible = "arm,pl061", "arm,primecell";
 207                         gpio-controller;
 208                         reg = <0x0 0xfd410000 0x1000>;
 209                         clocks = <&clk_bus>;
 210                         clock-names = "apb_pclk";
 211                         status = "disabled";
 212                 };
 213                 gpio2: gpio@fd420000 {
 214                         #gpio-cells = <2>;
 215                         compatible = "arm,pl061", "arm,primecell";
 216                         gpio-controller;
 217                         reg = <0x0 0xfd420000 0x1000>;
 218                         clocks = <&clk_bus>;
 219                         clock-names = "apb_pclk";
 220                         status = "disabled";
 221                 };
 222                 gpio3: gpio@fd430000 {
 223                         #gpio-cells = <2>;
 224                         compatible = "arm,pl061", "arm,primecell";
 225                         gpio-controller;
 226                         reg = <0x0 0xfd430000 0x1000>;
 227                         clocks = <&clk_bus>;
 228                         clock-names = "apb_pclk";
 229                 };
 230                 gpio4: gpio@fd440000 {
 231                         #gpio-cells = <2>;
 232                         compatible = "arm,pl061", "arm,primecell";
 233                         gpio-controller;
 234                         reg = <0x0 0xfd440000 0x1000>;
 235                         clocks = <&clk_bus>;
 236                         clock-names = "apb_pclk";
 237                         status = "disabled";
 238                 };
 239                 gpio5: gpio@fd450000 {
 240                         #gpio-cells = <2>;
 241                         compatible = "arm,pl061", "arm,primecell";
 242                         gpio-controller;
 243                         reg = <0x0 0xfd450000 0x1000>;
 244                         clocks = <&clk_bus>;
 245                         clock-names = "apb_pclk";
 246                         status = "disabled";
 247                 };
 248                 gpio6: gpio@fd460000 {
 249                         #gpio-cells = <2>;
 250                         compatible = "arm,pl061", "arm,primecell";
 251                         gpio-controller;
 252                         reg = <0x0 0xfd460000 0x1000>;
 253                         clocks = <&clk_bus>;
 254                         clock-names = "apb_pclk";
 255                         status = "disabled";
 256                 };
 257                 gpio7: gpio@fd470000 {
 258                         #gpio-cells = <2>;
 259                         compatible = "arm,pl061", "arm,primecell";
 260                         gpio-controller;
 261                         reg = <0x0 0xfd470000 0x1000>;
 262                         clocks = <&clk_bus>;
 263                         clock-names = "apb_pclk";
 264                         status = "disabled";
 265                 };
 266                 gpio8: gpio@fd480000 {
 267                         #gpio-cells = <2>;
 268                         compatible = "arm,pl061", "arm,primecell";
 269                         gpio-controller;
 270                         reg = <0x0 0xfd480000 0x1000>;
 271                         clocks = <&clk_bus>;
 272                         clock-names = "apb_pclk";
 273                         status = "disabled";
 274                 };
 275                 gpio9: gpio@fd490000 {
 276                         #gpio-cells = <2>;
 277                         compatible = "arm,pl061", "arm,primecell";
 278                         gpio-controller;
 279                         reg = <0x0 0xfd490000 0x1000>;
 280                         clocks = <&clk_bus>;
 281                         clock-names = "apb_pclk";
 282                         status = "disabled";
 283                 };
 284                 gpio10: gpio@fd4a0000 {
 285                         #gpio-cells = <2>;
 286                         compatible = "arm,pl061", "arm,primecell";
 287                         gpio-controller;
 288                         reg = <0x0 0xfd4a0000 0x1000>;
 289                         clocks = <&clk_bus>;
 290                         clock-names = "apb_pclk";
 291                         status = "disabled";
 292                 };
 293                 gpio11: gpio@fd4b0000 {
 294                         #gpio-cells = <2>;
 295                         compatible = "arm,pl061", "arm,primecell";
 296                         gpio-controller;
 297                         reg = <0x0 0xfd4b0000 0x1000>;
 298                         clocks = <&clk_bus>;
 299                         clock-names = "apb_pclk";
 300                 };
 301                 gpio12: gpio@fd4c0000 {
 302                         #gpio-cells = <2>;
 303                         compatible = "arm,pl061", "arm,primecell";
 304                         gpio-controller;
 305                         reg = <0x0 0xfd4c0000 0x1000>;
 306                         clocks = <&clk_bus>;
 307                         clock-names = "apb_pclk";
 308                         status = "disabled";
 309                 };
 310                 gpio13: gpio@fd4d0000 {
 311                         #gpio-cells = <2>;
 312                         compatible = "arm,pl061", "arm,primecell";
 313                         gpio-controller;
 314                         reg = <0x0 0xfd4d0000 0x1000>;
 315                         clocks = <&clk_bus>;
 316                         clock-names = "apb_pclk";
 317                         status = "disabled";
 318                 };
 319                 gpio14: gpio@fd4e0000 {
 320                         #gpio-cells = <2>;
 321                         compatible = "arm,pl061", "arm,primecell";
 322                         gpio-controller;
 323                         reg = <0x0 0xfd4e0000 0x1000>;
 324                         clocks = <&clk_bus>;
 325                         clock-names = "apb_pclk";
 326                         status = "disabled";
 327                 };
 328                 gpio15: gpio@fd4f0000 {
 329                         #gpio-cells = <2>;
 330                         compatible = "arm,pl061", "arm,primecell";
 331                         gpio-controller;
 332                         reg = <0x0 0xfd4f0000 0x1000>;
 333                         clocks = <&clk_bus>;
 334                         clock-names = "apb_pclk";
 335                         status = "disabled";
 336                 };
 337                 gpio16: gpio@fd500000 {
 338                         #gpio-cells = <2>;
 339                         compatible = "arm,pl061", "arm,primecell";
 340                         gpio-controller;
 341                         reg = <0x0 0xfd500000 0x1000>;
 342                         clocks = <&clk_bus>;
 343                         clock-names = "apb_pclk";
 344                         status = "disabled";
 345                 };
 346                 gpio17: gpio@fd510000 {
 347                         #gpio-cells = <2>;
 348                         compatible = "arm,pl061", "arm,primecell";
 349                         gpio-controller;
 350                         reg = <0x0 0xfd510000 0x1000>;
 351                         clocks = <&clk_bus>;
 352                         clock-names = "apb_pclk";
 353                 };
 354         };
 355 };