src/arm64/mediatek/mt8395-genio-1200-evk.dts

   1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
   2 /*
   3  * Copyright (C) 2023 MediaTek Inc.
   4  * Author: Ben Lok <ben.lok@mediatek.com>
   5  *         Macpaul Lin <macpaul.lin@mediatek.com>
   6  */
   7 /dts-v1/;
   8
   9 #include "mt8195.dtsi"
  10 #include "mt6359.dtsi"
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include <dt-bindings/input/input.h>
  13 #include <dt-bindings/interrupt-controller/irq.h>
  14 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
  15 #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
  16 #include <dt-bindings/spmi/spmi.h>
  17 #include <dt-bindings/usb/pd.h>
  18
  19 / {
  20         model = "MediaTek Genio 1200 EVK-P1V2-EMMC";
  21         compatible = "mediatek,mt8395-evk", "mediatek,mt8395",
  22                      "mediatek,mt8195";
  23
  24         aliases {
  25                 serial0 = &uart0;
  26                 ethernet0 = &eth;
  27         };
  28
  29         chosen {
  30                 stdout-path = "serial0:921600n8";
  31         };
  32
  33         firmware {
  34                 optee {
  35                         compatible = "linaro,optee-tz";
  36                         method = "smc";
  37                 };
  38         };
  39
  40         memory@40000000 {
  41                 device_type = "memory";
  42                 reg = <0 0x40000000 0x2 0x00000000>;
  43         };
  44
  45         reserved-memory {
  46                 #address-cells = <2>;
  47                 #size-cells = <2>;
  48                 ranges;
  49
  50                 /*
  51                  * 12 MiB reserved for OP-TEE (BL32)
  52                  * +-----------------------+ 0x43e0_0000
  53                  * |      SHMEM 2MiB       |
  54                  * +-----------------------+ 0x43c0_0000
  55                  * |        | TA_RAM  8MiB |
  56                  * + TZDRAM +--------------+ 0x4340_0000
  57                  * |        | TEE_RAM 2MiB |
  58                  * +-----------------------+ 0x4320_0000
  59                  */
  60                 optee_reserved: optee@43200000 {
  61                         no-map;
  62                         reg = <0 0x43200000 0 0x00c00000>;
  63                 };
  64
  65                 scp_mem: memory@50000000 {
  66                         compatible = "shared-dma-pool";
  67                         reg = <0 0x50000000 0 0x2900000>;
  68                         no-map;
  69                 };
  70
  71                 vpu_mem: memory@53000000 {
  72                         compatible = "shared-dma-pool";
  73                         reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
  74                 };
  75
  76                 /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
  77                 bl31_secmon_mem: memory@54600000 {
  78                         no-map;
  79                         reg = <0 0x54600000 0x0 0x200000>;
  80                 };
  81
  82                 snd_dma_mem: memory@60000000 {
  83                         compatible = "shared-dma-pool";
  84                         reg = <0 0x60000000 0 0x1100000>;
  85                         no-map;
  86                 };
  87
  88                 apu_mem: memory@62000000 {
  89                         compatible = "shared-dma-pool";
  90                         reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
  91                 };
  92         };
  93
  94         backlight_lcd0: backlight-lcd0 {
  95                 compatible = "pwm-backlight";
  96                 pwms = <&disp_pwm0 0 500000>;
  97                 enable-gpios = <&pio 47 GPIO_ACTIVE_HIGH>;
  98                 brightness-levels = <0 1023>;
  99                 num-interpolated-steps = <1023>;
 100                 default-brightness-level = <576>;
 101         };
 102
 103         backlight_lcd1: backlight-lcd1 {
 104                 compatible = "pwm-backlight";
 105                 pwms = <&disp_pwm1 0 500000>;
 106                 enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
 107                 brightness-levels = <0 1023>;
 108                 num-interpolated-steps = <1023>;
 109                 default-brightness-level = <576>;
 110         };
 111
 112         can_clk: can-clk {
 113                 compatible = "fixed-clock";
 114                 #clock-cells = <0>;
 115                 clock-frequency = <20000000>;
 116                 clock-output-names = "can-clk";
 117         };
 118
 119         edp_panel_fixed_3v3: regulator-0 {
 120                 compatible = "regulator-fixed";
 121                 regulator-name = "edp_panel_3v3";
 122                 regulator-min-microvolt = <3300000>;
 123                 regulator-max-microvolt = <3300000>;
 124                 enable-active-high;
 125                 gpio = <&pio 6 GPIO_ACTIVE_HIGH>;
 126                 pinctrl-names = "default";
 127                 pinctrl-0 = <&edp_panel_3v3_en_pins>;
 128         };
 129
 130         edp_panel_fixed_12v: regulator-1 {
 131                 compatible = "regulator-fixed";
 132                 regulator-name = "edp_backlight_12v";
 133                 regulator-min-microvolt = <12000000>;
 134                 regulator-max-microvolt = <12000000>;
 135                 enable-active-high;
 136                 gpio = <&pio 96 GPIO_ACTIVE_HIGH>;
 137                 pinctrl-names = "default";
 138                 pinctrl-0 = <&edp_panel_12v_en_pins>;
 139         };
 140
 141         keys: gpio-keys {
 142                 compatible = "gpio-keys";
 143
 144                 button-volume-up {
 145                         wakeup-source;
 146                         debounce-interval = <100>;
 147                         gpios = <&pio 106 GPIO_ACTIVE_LOW>;
 148                         label = "volume_up";
 149                         linux,code = <KEY_VOLUMEUP>;
 150                 };
 151         };
 152
 153         wifi_fixed_3v3: regulator-2 {
 154                 compatible = "regulator-fixed";
 155                 regulator-name = "wifi_3v3";
 156                 regulator-min-microvolt = <3300000>;
 157                 regulator-max-microvolt = <3300000>;
 158                 gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
 159                 enable-active-high;
 160                 regulator-always-on;
 161         };
 162 };
 163
 164 &disp_pwm0 {
 165         pinctrl-names = "default";
 166         pinctrl-0 = <&pwm0_default_pins>;
 167         status = "okay";
 168 };
 169
 170 &dmic_codec {
 171         wakeup-delay-ms = <200>;
 172 };
 173
 174 &eth {
 175         phy-mode ="rgmii-rxid";
 176         phy-handle = <&eth_phy0>;
 177         snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
 178         snps,reset-delays-us = <0 10000 10000>;
 179         mediatek,tx-delay-ps = <2030>;
 180         mediatek,mac-wol;
 181         pinctrl-names = "default", "sleep";
 182         pinctrl-0 = <&eth_default_pins>;
 183         pinctrl-1 = <&eth_sleep_pins>;
 184         status = "okay";
 185
 186         mdio {
 187                 compatible = "snps,dwmac-mdio";
 188                 #address-cells = <1>;
 189                 #size-cells = <0>;
 190                 eth_phy0: eth-phy0@1 {
 191                         compatible = "ethernet-phy-id001c.c916";
 192                         reg = <0x1>;
 193                 };
 194         };
 195 };
 196
 197 &i2c0 {
 198         clock-frequency = <400000>;
 199         pinctrl-0 = <&i2c0_pins>;
 200         pinctrl-names = "default";
 201         status = "okay";
 202 };
 203
 204 &i2c1 {
 205         clock-frequency = <400000>;
 206         pinctrl-0 = <&i2c1_pins>;
 207         pinctrl-names = "default";
 208         status = "okay";
 209
 210         touchscreen@5d {
 211                 compatible = "goodix,gt9271";
 212                 reg = <0x5d>;
 213                 interrupt-parent = <&pio>;
 214                 interrupts = <132 IRQ_TYPE_EDGE_RISING>;
 215                 irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
 216                 reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
 217                 AVDD28-supply = <&mt6360_ldo1>;
 218                 pinctrl-names = "default";
 219                 pinctrl-0 = <&touch_pins>;
 220         };
 221 };
 222
 223 &i2c2 {
 224         clock-frequency = <400000>;
 225         pinctrl-0 = <&i2c2_pins>;
 226         pinctrl-names = "default";
 227         status = "okay";
 228 };
 229
 230 &i2c6 {
 231         clock-frequency = <400000>;
 232         pinctrl-0 = <&i2c6_pins>;
 233         pinctrl-names = "default";
 234         #address-cells = <1>;
 235         #size-cells = <0>;
 236         status = "okay";
 237
 238         mt6360: pmic@34 {
 239                 compatible = "mediatek,mt6360";
 240                 reg = <0x34>;
 241                 interrupt-parent = <&pio>;
 242                 interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
 243                 interrupt-names = "IRQB";
 244                 interrupt-controller;
 245                 #interrupt-cells = <1>;
 246                 pinctrl-0 = <&mt6360_pins>;
 247
 248                 charger {
 249                         compatible = "mediatek,mt6360-chg";
 250                         richtek,vinovp-microvolt = <14500000>;
 251
 252                         otg_vbus_regulator: usb-otg-vbus-regulator {
 253                                 regulator-name = "usb-otg-vbus";
 254                                 regulator-min-microvolt = <4425000>;
 255                                 regulator-max-microvolt = <5825000>;
 256                         };
 257                 };
 258
 259                 regulator {
 260                         compatible = "mediatek,mt6360-regulator";
 261                         LDO_VIN3-supply = <&mt6360_buck2>;
 262
 263                         mt6360_buck1: buck1 {
 264                                 regulator-name = "emi_vdd2";
 265                                 regulator-min-microvolt = <300000>;
 266                                 regulator-max-microvolt = <1300000>;
 267                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 268                                                            MT6360_OPMODE_LP
 269                                                            MT6360_OPMODE_ULP>;
 270                                 regulator-always-on;
 271                         };
 272
 273                         mt6360_buck2: buck2 {
 274                                 regulator-name = "emi_vddq";
 275                                 regulator-min-microvolt = <300000>;
 276                                 regulator-max-microvolt = <1300000>;
 277                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 278                                                            MT6360_OPMODE_LP
 279                                                            MT6360_OPMODE_ULP>;
 280                                 regulator-always-on;
 281                         };
 282
 283                         mt6360_ldo1: ldo1 {
 284                                 regulator-name = "tp1_p3v0";
 285                                 regulator-min-microvolt = <3300000>;
 286                                 regulator-max-microvolt = <3300000>;
 287                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 288                                                            MT6360_OPMODE_LP>;
 289                                 regulator-always-on;
 290                         };
 291
 292                         mt6360_ldo2: ldo2 {
 293                                 regulator-name = "panel1_p1v8";
 294                                 regulator-min-microvolt = <1800000>;
 295                                 regulator-max-microvolt = <1800000>;
 296                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 297                                                            MT6360_OPMODE_LP>;
 298                         };
 299
 300                         mt6360_ldo3: ldo3 {
 301                                 regulator-name = "vmc_pmu";
 302                                 regulator-min-microvolt = <1200000>;
 303                                 regulator-max-microvolt = <3600000>;
 304                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 305                                                            MT6360_OPMODE_LP>;
 306                         };
 307
 308                         mt6360_ldo5: ldo5 {
 309                                 regulator-name = "vmch_pmu";
 310                                 regulator-min-microvolt = <2700000>;
 311                                 regulator-max-microvolt = <3600000>;
 312                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 313                                                            MT6360_OPMODE_LP>;
 314                         };
 315
 316                         /* This is a measure point, which name is mt6360_ldo1 on schematic */
 317                         mt6360_ldo6: ldo6 {
 318                                 regulator-name = "mt6360_ldo1";
 319                                 regulator-min-microvolt = <500000>;
 320                                 regulator-max-microvolt = <2100000>;
 321                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 322                                                            MT6360_OPMODE_LP>;
 323                         };
 324
 325                         mt6360_ldo7: ldo7 {
 326                                 regulator-name = "emi_vmddr_en";
 327                                 regulator-min-microvolt = <500000>;
 328                                 regulator-max-microvolt = <2100000>;
 329                                 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
 330                                                            MT6360_OPMODE_LP>;
 331                                 regulator-always-on;
 332                         };
 333                 };
 334         };
 335 };
 336
 337 &mfg0 {
 338         domain-supply = <&mt6315_7_vbuck1>;
 339 };
 340
 341 &mmc0 {
 342         status = "okay";
 343         pinctrl-names = "default", "state_uhs";
 344         pinctrl-0 = <&mmc0_default_pins>;
 345         pinctrl-1 = <&mmc0_uhs_pins>;
 346         bus-width = <8>;
 347         max-frequency = <200000000>;
 348         cap-mmc-highspeed;
 349         mmc-hs200-1_8v;
 350         mmc-hs400-1_8v;
 351         cap-mmc-hw-reset;
 352         no-sdio;
 353         no-sd;
 354         hs400-ds-delay = <0x14c11>;
 355         vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
 356         vqmmc-supply = <&mt6359_vufs_ldo_reg>;
 357         non-removable;
 358 };
 359
 360 &mmc1 {
 361         pinctrl-names = "default", "state_uhs";
 362         pinctrl-0 = <&mmc1_default_pins>;
 363         pinctrl-1 = <&mmc1_uhs_pins>;
 364         bus-width = <4>;
 365         max-frequency = <200000000>;
 366         cap-sd-highspeed;
 367         sd-uhs-sdr50;
 368         sd-uhs-sdr104;
 369         no-mmc;
 370         no-sdio;
 371         vmmc-supply = <&mt6360_ldo5>;
 372         vqmmc-supply = <&mt6360_ldo3>;
 373         status = "okay";
 374         non-removable;
 375 };
 376
 377 &mt6359_vaud18_ldo_reg {
 378         regulator-always-on;
 379 };
 380
 381 &mt6359_vbbck_ldo_reg {
 382         regulator-always-on;
 383 };
 384
 385 /* For USB Hub */
 386 &mt6359_vcamio_ldo_reg {
 387         regulator-always-on;
 388 };
 389
 390 &mt6359_vcn33_2_bt_ldo_reg {
 391         regulator-min-microvolt = <3300000>;
 392         regulator-max-microvolt = <3300000>;
 393 };
 394
 395 &mt6359_vcore_buck_reg {
 396         regulator-always-on;
 397 };
 398
 399 &mt6359_vgpu11_buck_reg {
 400         regulator-always-on;
 401 };
 402
 403 &mt6359_vpu_buck_reg {
 404         regulator-always-on;
 405 };
 406
 407 &mt6359_vrf12_ldo_reg {
 408         regulator-always-on;
 409 };
 410
 411 &mt6359codec {
 412         mediatek,mic-type-0 = <1>; /* ACC */
 413         mediatek,mic-type-1 = <3>; /* DCC */
 414         mediatek,mic-type-2 = <1>; /* ACC */
 415 };
 416
 417 &pcie0 {
 418         pinctrl-names = "default", "idle";
 419         pinctrl-0 = <&pcie0_default_pins>;
 420         pinctrl-1 = <&pcie0_idle_pins>;
 421         status = "okay";
 422 };
 423
 424 &pcie1 {
 425         pinctrl-names = "default";
 426         pinctrl-0 = <&pcie1_default_pins>;
 427         status = "disabled";
 428 };
 429
 430 &pciephy {
 431         status = "okay";
 432 };
 433
 434 &pio {
 435         audio_default_pins: audio-default-pins {
 436                 pins-cmd-dat {
 437                         pinmux = <PINMUX_GPIO61__FUNC_DMIC1_CLK>,
 438                                  <PINMUX_GPIO62__FUNC_DMIC1_DAT>,
 439                                  <PINMUX_GPIO65__FUNC_PCM_DO>,
 440                                  <PINMUX_GPIO66__FUNC_PCM_CLK>,
 441                                  <PINMUX_GPIO67__FUNC_PCM_DI>,
 442                                  <PINMUX_GPIO68__FUNC_PCM_SYNC>,
 443                                  <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
 444                                  <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
 445                                  <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
 446                                  <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
 447                                  <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
 448                                  <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
 449                                  <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>;
 450                 };
 451         };
 452
 453         disp_pwm1_default_pins: disp-pwm1-default-pins {
 454                 pins1 {
 455                         pinmux = <PINMUX_GPIO104__FUNC_DISP_PWM1>;
 456                 };
 457         };
 458
 459         edp_panel_12v_en_pins: edp-panel-12v-en-pins {
 460                 pins1 {
 461                         pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
 462                         output-high;
 463                 };
 464         };
 465
 466         edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
 467                 pins1 {
 468                         pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
 469                         output-high;
 470                 };
 471         };
 472
 473         eth_default_pins: eth-default-pins {
 474                 pins-cc {
 475                         pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
 476                                  <PINMUX_GPIO86__FUNC_GBE_RXC>,
 477                                  <PINMUX_GPIO87__FUNC_GBE_RXDV>,
 478                                  <PINMUX_GPIO88__FUNC_GBE_TXEN>;
 479                         drive-strength = <MTK_DRIVE_8mA>;
 480                 };
 481
 482                 pins-mdio {
 483                         pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
 484                                  <PINMUX_GPIO90__FUNC_GBE_MDIO>;
 485                         input-enable;
 486                 };
 487
 488                 pins-power {
 489                         pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
 490                                  <PINMUX_GPIO92__FUNC_GPIO92>;
 491                         output-high;
 492                 };
 493
 494                 pins-rxd {
 495                         pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
 496                                  <PINMUX_GPIO82__FUNC_GBE_RXD2>,
 497                                  <PINMUX_GPIO83__FUNC_GBE_RXD1>,
 498                                  <PINMUX_GPIO84__FUNC_GBE_RXD0>;
 499                 };
 500
 501                 pins-txd {
 502                         pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
 503                                  <PINMUX_GPIO78__FUNC_GBE_TXD2>,
 504                                  <PINMUX_GPIO79__FUNC_GBE_TXD1>,
 505                                  <PINMUX_GPIO80__FUNC_GBE_TXD0>;
 506                         drive-strength = <MTK_DRIVE_8mA>;
 507                 };
 508         };
 509
 510         eth_sleep_pins: eth-sleep-pins {
 511                 pins-cc {
 512                         pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
 513                                  <PINMUX_GPIO86__FUNC_GPIO86>,
 514                                  <PINMUX_GPIO87__FUNC_GPIO87>,
 515                                  <PINMUX_GPIO88__FUNC_GPIO88>;
 516                 };
 517
 518                 pins-mdio {
 519                         pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
 520                                  <PINMUX_GPIO90__FUNC_GPIO90>;
 521                         input-disable;
 522                         bias-disable;
 523                 };
 524
 525                 pins-rxd {
 526                         pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
 527                                  <PINMUX_GPIO82__FUNC_GPIO82>,
 528                                  <PINMUX_GPIO83__FUNC_GPIO83>,
 529                                  <PINMUX_GPIO84__FUNC_GPIO84>;
 530                 };
 531
 532                 pins-txd {
 533                         pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
 534                                  <PINMUX_GPIO78__FUNC_GPIO78>,
 535                                  <PINMUX_GPIO79__FUNC_GPIO79>,
 536                                  <PINMUX_GPIO80__FUNC_GPIO80>;
 537                 };
 538         };
 539
 540         gpio_key_pins: gpio-keys-pins {
 541                 pins {
 542                         pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
 543                         bias-pull-up;
 544                         input-enable;
 545                 };
 546         };
 547
 548         i2c0_pins: i2c0-pins {
 549                 pins {
 550                         pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
 551                                  <PINMUX_GPIO9__FUNC_SCL0>;
 552                         bias-pull-up = <MTK_PULL_SET_RSEL_111>;
 553                         drive-strength-microamp = <1000>;
 554                 };
 555         };
 556
 557         i2c1_pins: i2c1-pins {
 558                 pins {
 559                         pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
 560                                  <PINMUX_GPIO11__FUNC_SCL1>;
 561                         bias-pull-up = <MTK_PULL_SET_RSEL_111>;
 562                         drive-strength-microamp = <1000>;
 563                 };
 564         };
 565
 566         i2c2_pins: i2c2-pins {
 567                 pins {
 568                         pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
 569                                  <PINMUX_GPIO13__FUNC_SCL2>;
 570                         bias-pull-up = <MTK_PULL_SET_RSEL_111>;
 571                         drive-strength = <MTK_DRIVE_6mA>;
 572                 };
 573         };
 574
 575         i2c6_pins: i2c6-pins {
 576                 pins {
 577                         pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
 578                                  <PINMUX_GPIO26__FUNC_SCL6>;
 579                         bias-pull-up;
 580                 };
 581         };
 582
 583         mmc0_default_pins: mmc0-default-pins {
 584                 pins-clk {
 585                         pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
 586                         drive-strength = <MTK_DRIVE_6mA>;
 587                         bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 588                 };
 589
 590                 pins-cmd-dat {
 591                         pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
 592                                  <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
 593                                  <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
 594                                  <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
 595                                  <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
 596                                  <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
 597                                  <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
 598                                  <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 599                                  <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 600                         input-enable;
 601                         drive-strength = <MTK_DRIVE_6mA>;
 602                         bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 603                 };
 604
 605                 pins-rst {
 606                         pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
 607                         drive-strength = <MTK_DRIVE_6mA>;
 608                         bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 609                 };
 610         };
 611
 612         mmc0_uhs_pins: mmc0-uhs-pins {
 613                 pins-clk {
 614                         pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
 615                         drive-strength = <MTK_DRIVE_8mA>;
 616                         bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 617                 };
 618
 619                 pins-cmd-dat {
 620                         pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
 621                                  <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
 622                                  <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
 623                                  <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
 624                                  <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
 625                                  <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
 626                                  <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
 627                                  <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
 628                                  <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
 629                         input-enable;
 630                         drive-strength = <MTK_DRIVE_8mA>;
 631                         bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 632                 };
 633
 634                 pins-ds {
 635                         pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
 636                         drive-strength = <MTK_DRIVE_8mA>;
 637                         bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 638                 };
 639
 640                 pins-rst {
 641                         pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
 642                         drive-strength = <MTK_DRIVE_8mA>;
 643                         bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 644                 };
 645         };
 646
 647         mmc1_default_pins: mmc1-default-pins {
 648                 pins-clk {
 649                         pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
 650                         drive-strength = <MTK_DRIVE_8mA>;
 651                         bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 652                 };
 653
 654                 pins-cmd-dat {
 655                         pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
 656                                  <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
 657                                  <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
 658                                  <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 659                                  <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 660                         input-enable;
 661                         drive-strength = <MTK_DRIVE_8mA>;
 662                         bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 663                 };
 664         };
 665
 666         mmc1_uhs_pins: mmc1-uhs-pins {
 667                 pins-clk {
 668                         pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
 669                         drive-strength = <MTK_DRIVE_8mA>;
 670                         bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 671                 };
 672
 673                 pins-cmd-dat {
 674                         pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
 675                                  <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
 676                                  <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
 677                                  <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
 678                                  <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
 679                         input-enable;
 680                         drive-strength = <MTK_DRIVE_8mA>;
 681                         bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
 682                 };
 683         };
 684
 685         mt6360_pins: mt6360-pins {
 686                 pins {
 687                         pinmux = <PINMUX_GPIO17__FUNC_GPIO17>,
 688                                  <PINMUX_GPIO128__FUNC_GPIO128>;
 689                         input-enable;
 690                         bias-pull-up;
 691                 };
 692         };
 693
 694         pcie0_default_pins: pcie0-default-pins {
 695                 pins {
 696                         pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
 697                                  <PINMUX_GPIO20__FUNC_PERSTN>,
 698                                  <PINMUX_GPIO21__FUNC_CLKREQN>;
 699                         bias-pull-up;
 700                 };
 701         };
 702
 703         pcie0_idle_pins: pcie0-idle-pins {
 704                 pins {
 705                         pinmux = <PINMUX_GPIO20__FUNC_GPIO20>;
 706                         bias-disable;
 707                         output-low;
 708                 };
 709         };
 710
 711         pcie1_default_pins: pcie1-default-pins {
 712                 pins {
 713                         pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>,
 714                                  <PINMUX_GPIO23__FUNC_CLKREQN_1>,
 715                                  <PINMUX_GPIO24__FUNC_WAKEN_1>;
 716                         bias-pull-up;
 717                 };
 718         };
 719
 720         pwm0_default_pins: pwm0-default-pins {
 721                 pins-cmd-dat {
 722                         pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
 723                 };
 724         };
 725
 726         spi1_pins: spi1-pins {
 727                 pins {
 728                         pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
 729                                  <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
 730                                  <PINMUX_GPIO138__FUNC_SPIM1_MO>,
 731                                  <PINMUX_GPIO139__FUNC_SPIM1_MI>;
 732                         bias-disable;
 733                 };
 734         };
 735
 736         spi2_pins: spi-pins {
 737                 pins {
 738                         pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
 739                                  <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
 740                                  <PINMUX_GPIO142__FUNC_SPIM2_MO>,
 741                                  <PINMUX_GPIO143__FUNC_SPIM2_MI>;
 742                         bias-disable;
 743                 };
 744         };
 745
 746         touch_pins: touch-pins {
 747                 pins-irq {
 748                         pinmux = <PINMUX_GPIO132__FUNC_GPIO132>;
 749                         input-enable;
 750                         bias-disable;
 751                 };
 752
 753                 pins-reset {
 754                         pinmux = <PINMUX_GPIO133__FUNC_GPIO133>;
 755                         output-high;
 756                 };
 757         };
 758
 759         uart0_pins: uart0-pins {
 760                 pins {
 761                         pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
 762                                  <PINMUX_GPIO99__FUNC_URXD0>;
 763                 };
 764         };
 765
 766         uart1_pins: uart1-pins {
 767                 pins {
 768                         pinmux = <PINMUX_GPIO100__FUNC_URTS1>,
 769                                  <PINMUX_GPIO101__FUNC_UCTS1>,
 770                                  <PINMUX_GPIO102__FUNC_UTXD1>,
 771                                  <PINMUX_GPIO103__FUNC_URXD1>;
 772                 };
 773         };
 774 };
 775
 776 &pmic {
 777         interrupt-parent = <&pio>;
 778         interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
 779 };
 780
 781 &scp {
 782         memory-region = <&scp_mem>;
 783         status = "okay";
 784 };
 785
 786 &spi1 {
 787         pinctrl-0 = <&spi1_pins>;
 788         pinctrl-names = "default";
 789         mediatek,pad-select = <0>;
 790         #address-cells = <1>;
 791         #size-cells = <0>;
 792         status = "okay";
 793         cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>;
 794
 795         can0: can@0 {
 796                 compatible = "microchip,mcp2518fd";
 797                 reg = <0>;
 798                 clocks = <&can_clk>;
 799                 spi-max-frequency = <20000000>;
 800                 interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>;
 801                 vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
 802                 xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
 803         };
 804 };
 805
 806 &spi2 {
 807         pinctrl-0 = <&spi2_pins>;
 808         pinctrl-names = "default";
 809         mediatek,pad-select = <0>;
 810         #address-cells = <1>;
 811         #size-cells = <0>;
 812         status = "okay";
 813 };
 814
 815 &spmi {
 816         #address-cells = <2>;
 817         #size-cells = <0>;
 818
 819         mt6315_6: pmic@6 {
 820                 compatible = "mediatek,mt6315-regulator";
 821                 reg = <0x6 SPMI_USID>;
 822
 823                 regulators {
 824                         mt6315_6_vbuck1: vbuck1 {
 825                                 regulator-compatible = "vbuck1";
 826                                 regulator-name = "Vbcpu";
 827                                 regulator-min-microvolt = <300000>;
 828                                 regulator-max-microvolt = <1193750>;
 829                                 regulator-enable-ramp-delay = <256>;
 830                                 regulator-allowed-modes = <0 1 2>;
 831                                 regulator-always-on;
 832                         };
 833                 };
 834         };
 835
 836         mt6315_7: pmic@7 {
 837                 compatible = "mediatek,mt6315-regulator";
 838                 reg = <0x7 SPMI_USID>;
 839
 840                 regulators {
 841                         mt6315_7_vbuck1: vbuck1 {
 842                                 regulator-compatible = "vbuck1";
 843                                 regulator-name = "Vgpu";
 844                                 regulator-min-microvolt = <300000>;
 845                                 regulator-max-microvolt = <1193750>;
 846                                 regulator-enable-ramp-delay = <256>;
 847                                 regulator-allowed-modes = <0 1 2>;
 848                         };
 849                 };
 850         };
 851 };
 852
 853 &u3phy0 {
 854         status = "okay";
 855 };
 856
 857 &u3phy1 {
 858         status = "okay";
 859 };
 860
 861 &u3phy2 {
 862         status = "okay";
 863 };
 864
 865 &u3phy3 {
 866         status = "okay";
 867 };
 868
 869 &uart0 {
 870         pinctrl-0 = <&uart0_pins>;
 871         pinctrl-names = "default";
 872         status = "okay";
 873 };
 874
 875 &uart1 {
 876         pinctrl-0 = <&uart1_pins>;
 877         pinctrl-names = "default";
 878         status = "okay";
 879 };
 880
 881 &ufsphy {
 882         status = "disabled";
 883 };
 884
 885 &xhci0 {
 886         status = "okay";
 887 };
 888
 889 &xhci1 {
 890         vusb33-supply = <&mt6359_vusb_ldo_reg>;
 891         status = "okay";
 892 };
 893
 894 &xhci2 {
 895         vusb33-supply = <&mt6359_vusb_ldo_reg>;
 896         status = "okay";
 897 };
 898
 899 &xhci3 {
 900         vusb33-supply = <&mt6359_vusb_ldo_reg>;
 901         status = "okay";
 902 };