src/arm64/qcom/msm8916-asus-z00l.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 /dts-v1/;
   4
   5 #include "msm8916-pm8916.dtsi"
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8 #include <dt-bindings/interrupt-controller/irq.h>
   9
  10 / {
  11         model = "Asus Zenfone 2 Laser";
  12         compatible = "asus,z00l", "qcom,msm8916";
  13         chassis-type = "handset";
  14
  15         aliases {
  16                 mmc0 = &sdhc_1; /* eMMC */
  17                 mmc1 = &sdhc_2; /* SD card */
  18                 serial0 = &blsp_uart2;
  19         };
  20
  21         chosen {
  22                 stdout-path = "serial0";
  23         };
  24
  25         gpio-keys {
  26                 compatible = "gpio-keys";
  27
  28                 pinctrl-names = "default";
  29                 pinctrl-0 = <&gpio_keys_default>;
  30
  31                 label = "GPIO Buttons";
  32
  33                 button-volume-up {
  34                         label = "Volume Up";
  35                         gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
  36                         linux,code = <KEY_VOLUMEUP>;
  37                         debounce-interval = <15>;
  38                 };
  39
  40                 button-volume-down {
  41                         label = "Volume Down";
  42                         gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_VOLUMEDOWN>;
  44                         debounce-interval = <15>;
  45                 };
  46         };
  47
  48         reg_sd_vmmc: regulator-sdcard-vmmc {
  49                 compatible = "regulator-fixed";
  50                 regulator-name = "sdcard-vmmc";
  51                 regulator-min-microvolt = <2950000>;
  52                 regulator-max-microvolt = <2950000>;
  53
  54                 gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
  55                 enable-active-high;
  56
  57                 startup-delay-us = <200>;
  58
  59                 pinctrl-names = "default";
  60                 pinctrl-0 = <&sd_vmmc_en_default>;
  61         };
  62
  63         usb_id: usb-id {
  64                 compatible = "linux,extcon-usb-gpio";
  65                 id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
  66                 pinctrl-names = "default";
  67                 pinctrl-0 = <&usb_id_default>;
  68         };
  69 };
  70
  71 &blsp_i2c2 {
  72         status = "okay";
  73
  74         magnetometer@c {
  75                 compatible = "asahi-kasei,ak09911";
  76                 reg = <0x0c>;
  77
  78                 vdd-supply = <&pm8916_l8>;
  79                 vid-supply = <&pm8916_l6>;
  80
  81                 reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>;
  82
  83                 pinctrl-names = "default";
  84                 pinctrl-0 = <&mag_reset_default>;
  85         };
  86
  87         imu@68 {
  88                 compatible = "invensense,mpu6515";
  89                 reg = <0x68>;
  90
  91                 interrupt-parent = <&tlmm>;
  92                 interrupts = <36 IRQ_TYPE_EDGE_RISING>;
  93
  94                 vdd-supply = <&pm8916_l17>;
  95                 vddio-supply = <&pm8916_l6>;
  96
  97                 pinctrl-names = "default";
  98                 pinctrl-0 = <&imu_default>;
  99
 100                 mount-matrix = "1",  "0", "0",
 101                                "0", "-1", "0",
 102                                "0",  "0", "1";
 103         };
 104 };
 105
 106 &blsp_i2c5 {
 107         status = "okay";
 108
 109         touchscreen@38 {
 110                 compatible = "edt,edt-ft5306";
 111                 reg = <0x38>;
 112
 113                 interrupt-parent = <&tlmm>;
 114                 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
 115
 116                 reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
 117
 118                 vcc-supply = <&pm8916_l11>;
 119                 iovcc-supply = <&pm8916_l6>;
 120
 121                 touchscreen-size-x = <720>;
 122                 touchscreen-size-y = <1280>;
 123
 124                 pinctrl-names = "default";
 125                 pinctrl-0 = <&touchscreen_default>;
 126         };
 127 };
 128
 129 &blsp_uart2 {
 130         status = "okay";
 131 };
 132
 133 &pm8916_rpm_regulators {
 134         pm8916_l17: l17 {
 135                 regulator-min-microvolt = <2850000>;
 136                 regulator-max-microvolt = <2850000>;
 137         };
 138 };
 139
 140 &sdhc_1 {
 141         status = "okay";
 142 };
 143
 144 &sdhc_2 {
 145         status = "okay";
 146         vmmc-supply = <&reg_sd_vmmc>;
 147
 148         pinctrl-names = "default", "sleep";
 149         pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
 150         pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
 151         cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 152 };
 153
 154 &usb {
 155         status = "okay";
 156         extcon = <&usb_id>, <&usb_id>;
 157 };
 158
 159 &usb_hs_phy {
 160         extcon = <&usb_id>;
 161 };
 162
 163 &venus {
 164         status = "okay";
 165 };
 166
 167 &venus_mem {
 168         status = "okay";
 169 };
 170
 171 &wcnss {
 172         status = "okay";
 173 };
 174
 175 &wcnss_iris {
 176         compatible = "qcom,wcn3620";
 177 };
 178
 179 &wcnss_mem {
 180         status = "okay";
 181 };
 182
 183 &tlmm {
 184         gpio_keys_default: gpio-keys-default-state {
 185                 pins = "gpio107", "gpio117";
 186                 function = "gpio";
 187
 188                 drive-strength = <2>;
 189                 bias-pull-up;
 190         };
 191
 192         imu_default: imu-default-state {
 193                 pins = "gpio36";
 194                 function = "gpio";
 195
 196                 drive-strength = <2>;
 197                 bias-disable;
 198         };
 199
 200         mag_reset_default: mag-reset-default-state {
 201                 pins = "gpio112";
 202                 function = "gpio";
 203
 204                 drive-strength = <2>;
 205                 bias-disable;
 206         };
 207
 208         sd_vmmc_en_default: sd-vmmc-en-default-state {
 209                 pins = "gpio87";
 210                 function = "gpio";
 211
 212                 drive-strength = <2>;
 213                 bias-disable;
 214         };
 215
 216         sdc2_cd_default: sdc2-cd-default-state {
 217                 pins = "gpio38";
 218                 function = "gpio";
 219                 drive-strength = <2>;
 220                 bias-disable;
 221         };
 222
 223         touchscreen_default: touchscreen-default-state {
 224                 touch-pins {
 225                         pins = "gpio13";
 226                         function = "gpio";
 227
 228                         drive-strength = <2>;
 229                         bias-pull-up;
 230                 };
 231
 232                 reset-pins {
 233                         pins = "gpio12";
 234                         function = "gpio";
 235
 236                         drive-strength = <2>;
 237                         bias-disable;
 238                 };
 239         };
 240
 241         usb_id_default: usb-id-default-state {
 242                 pins = "gpio110";
 243                 function = "gpio";
 244
 245                 drive-strength = <8>;
 246                 bias-pull-up;
 247         };
 248 };