]> git.ipfire.org Git - thirdparty/u-boot.git/blob - src/arm64/qcom/pm8010.dtsi
Squashed 'dts/upstream/' content from commit aaba2d45dc2a
[thirdparty/u-boot.git] / src / arm64 / qcom / pm8010.dtsi
1 // SPDX-License-Identifier: BSD-3-Clause
2 /*
3 * Copyright (c) 2022, Linaro Limited
4 */
5
6 #include <dt-bindings/interrupt-controller/irq.h>
7 #include <dt-bindings/spmi/spmi.h>
8
9 / {
10 thermal-zones {
11 pm8010-m-thermal {
12 polling-delay-passive = <100>;
13 polling-delay = <0>;
14
15 thermal-sensors = <&pm8010_m_temp_alarm>;
16
17 trips {
18 trip0 {
19 temperature = <95000>;
20 hysteresis = <0>;
21 type = "passive";
22 };
23
24 trip1 {
25 temperature = <115000>;
26 hysteresis = <0>;
27 type = "hot";
28 };
29 };
30 };
31
32 pm8010-n-thermal {
33 polling-delay-passive = <100>;
34 polling-delay = <0>;
35
36 thermal-sensors = <&pm8010_n_temp_alarm>;
37
38 trips {
39 trip0 {
40 temperature = <95000>;
41 hysteresis = <0>;
42 type = "passive";
43 };
44
45 trip1 {
46 temperature = <115000>;
47 hysteresis = <0>;
48 type = "hot";
49 };
50 };
51 };
52 };
53 };
54
55
56 &spmi_bus {
57 pm8010_m: pmic@c {
58 compatible = "qcom,pm8010", "qcom,spmi-pmic";
59 reg = <0xc SPMI_USID>;
60 #address-cells = <1>;
61 #size-cells = <0>;
62
63 pm8010_m_temp_alarm: temp-alarm@2400 {
64 compatible = "qcom,spmi-temp-alarm";
65 reg = <0x2400>;
66 interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
67 #thermal-sensor-cells = <0>;
68 };
69 };
70
71 pm8010_n: pmic@d {
72 compatible = "qcom,pm8010", "qcom,spmi-pmic";
73 reg = <0xd SPMI_USID>;
74 #address-cells = <1>;
75 #size-cells = <0>;
76
77 pm8010_n_temp_alarm: temp-alarm@2400 {
78 compatible = "qcom,spmi-temp-alarm";
79 reg = <0x2400>;
80 interrupts = <0xd 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
81 #thermal-sensor-cells = <0>;
82 };
83 };
84 };