src/arm64/qcom/pmi8998.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include <dt-bindings/interrupt-controller/irq.h>
   3 #include <dt-bindings/spmi/spmi.h>
   4
   5 &spmi_bus {
   6         pmi8998_lsid0: pmic@2 {
   7                 compatible = "qcom,pmi8998", "qcom,spmi-pmic";
   8                 reg = <0x2 SPMI_USID>;
   9                 #address-cells = <1>;
  10                 #size-cells = <0>;
  11
  12                 pmi8998_charger: charger@1000 {
  13                         compatible = "qcom,pmi8998-charger";
  14                         reg = <0x1000>;
  15
  16                         interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
  17                                      <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
  18                                      <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
  19                                      <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
  20                         interrupt-names = "usb-plugin",
  21                                           "bat-ov",
  22                                           "wdog-bark",
  23                                           "usbin-icl-change";
  24
  25                         io-channels = <&pmi8998_rradc 3>,
  26                                       <&pmi8998_rradc 4>;
  27                         io-channel-names = "usbin_i", "usbin_v";
  28
  29                         status = "disabled";
  30                 };
  31
  32                 pmi8998_gpios: gpio@c000 {
  33                         compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
  34                         reg = <0xc000>;
  35                         gpio-controller;
  36                         gpio-ranges = <&pmi8998_gpios 0 0 14>;
  37                         #gpio-cells = <2>;
  38                         interrupt-controller;
  39                         #interrupt-cells = <2>;
  40                 };
  41
  42                 pmi8998_rradc: adc@4500 {
  43                         compatible = "qcom,pmi8998-rradc";
  44                         reg = <0x4500>;
  45                         #io-channel-cells = <1>;
  46                 };
  47         };
  48
  49         pmi8998_lsid1: pmic@3 {
  50                 compatible = "qcom,pmi8998", "qcom,spmi-pmic";
  51                 reg = <0x3 SPMI_USID>;
  52                 #address-cells = <1>;
  53                 #size-cells = <0>;
  54
  55                 labibb {
  56                         compatible = "qcom,pmi8998-lab-ibb";
  57
  58                         ibb: ibb {
  59                                 interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
  60                                              <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>;
  61                                 interrupt-names = "sc-err", "ocp";
  62                         };
  63
  64                         lab: lab {
  65                                 interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
  66                                              <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
  67                                 interrupt-names = "sc-err", "ocp";
  68                         };
  69                 };
  70
  71                 pmi8998_lpg: pwm {
  72                         compatible = "qcom,pmi8998-lpg";
  73
  74                         #address-cells = <1>;
  75                         #size-cells = <0>;
  76                         #pwm-cells = <2>;
  77
  78                         status = "disabled";
  79                 };
  80
  81                 pmi8998_flash: led-controller@d300 {
  82                         compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led";
  83                         reg = <0xd300>;
  84                         status = "disabled";
  85                 };
  86
  87                 pmi8998_wled: leds@d800 {
  88                         compatible = "qcom,pmi8998-wled";
  89                         reg = <0xd800>, <0xd900>;
  90                         interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
  91                                      <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
  92                         interrupt-names = "ovp", "short";
  93                         label = "backlight";
  94
  95                         status = "disabled";
  96                 };
  97         };
  98 };