src/arm64/renesas/salvator-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for common parts of Salvator-X board variants
   4  *
   5  * Copyright (C) 2015-2016 Renesas Electronics Corp.
   6  */
   7
   8 /*
   9  * SSI-AK4613
  10  *
  11  * This command is required when Playback/Capture
  12  *
  13  *      amixer set "DVC Out" 100%
  14  *      amixer set "DVC In" 100%
  15  *
  16  * You can use Mute
  17  *
  18  *      amixer set "DVC Out Mute" on
  19  *      amixer set "DVC In Mute" on
  20  *
  21  * You can use Volume Ramp
  22  *
  23  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  24  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  25  *      amixer set "DVC Out Ramp" on
  26  *      aplay xxx.wav &
  27  *      amixer set "DVC Out"  80%  // Volume Down
  28  *      amixer set "DVC Out" 100%  // Volume Up
  29  */
  30
  31 #include <dt-bindings/gpio/gpio.h>
  32 #include <dt-bindings/input/input.h>
  33
  34 / {
  35         aliases {
  36                 i2c0 = &i2c0;
  37                 i2c1 = &i2c1;
  38                 i2c2 = &i2c2;
  39                 i2c3 = &i2c3;
  40                 i2c4 = &i2c4;
  41                 i2c5 = &i2c5;
  42                 i2c6 = &i2c6;
  43                 i2c7 = &i2c_dvfs;
  44                 serial0 = &scif2;
  45                 serial1 = &hscif1;
  46                 ethernet0 = &avb;
  47                 mmc0 = &sdhi2;
  48                 mmc1 = &sdhi0;
  49                 mmc2 = &sdhi3;
  50         };
  51
  52         chosen {
  53                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  54                 stdout-path = "serial0:115200n8";
  55         };
  56
  57         audio_clkout: audio-clkout {
  58                 /*
  59                  * This is same as <&rcar_sound 0>
  60                  * but needed to avoid cs2000/rcar_sound probe dead-lock
  61                  */
  62                 compatible = "fixed-clock";
  63                 #clock-cells = <0>;
  64                 clock-frequency = <12288000>;
  65         };
  66
  67         backlight: backlight {
  68                 compatible = "pwm-backlight";
  69                 pwms = <&pwm1 0 50000>;
  70
  71                 brightness-levels = <256 128 64 16 8 4 0>;
  72                 default-brightness-level = <6>;
  73
  74                 power-supply = <&reg_12v>;
  75                 enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
  76         };
  77
  78         cvbs-in {
  79                 compatible = "composite-video-connector";
  80                 label = "CVBS IN";
  81
  82                 port {
  83                         cvbs_con: endpoint {
  84                                 remote-endpoint = <&adv7482_ain7>;
  85                         };
  86                 };
  87         };
  88
  89         hdmi-in {
  90                 compatible = "hdmi-connector";
  91                 label = "HDMI IN";
  92                 type = "a";
  93
  94                 port {
  95                         hdmi_in_con: endpoint {
  96                                 remote-endpoint = <&adv7482_hdmi>;
  97                         };
  98                 };
  99         };
 100
 101         hdmi0-out {
 102                 compatible = "hdmi-connector";
 103                 label = "HDMI0 OUT";
 104                 type = "a";
 105
 106                 port {
 107                         hdmi0_con: endpoint {
 108                                 remote-endpoint = <&rcar_dw_hdmi0_out>;
 109                         };
 110                 };
 111         };
 112
 113         hdmi1-out {
 114                 compatible = "hdmi-connector";
 115                 label = "HDMI1 OUT";
 116                 type = "a";
 117
 118                 port {
 119                         hdmi1_con: endpoint {
 120                         };
 121                 };
 122         };
 123
 124         keys {
 125                 compatible = "gpio-keys";
 126
 127                 pinctrl-0 = <&keys_pins>;
 128                 pinctrl-names = "default";
 129
 130                 key-1 {
 131                         gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
 132                         linux,code = <KEY_1>;
 133                         label = "SW4-1";
 134                         wakeup-source;
 135                         debounce-interval = <20>;
 136                 };
 137                 key-2 {
 138                         gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
 139                         linux,code = <KEY_2>;
 140                         label = "SW4-2";
 141                         wakeup-source;
 142                         debounce-interval = <20>;
 143                 };
 144                 key-3 {
 145                         gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 146                         linux,code = <KEY_3>;
 147                         label = "SW4-3";
 148                         wakeup-source;
 149                         debounce-interval = <20>;
 150                 };
 151                 key-4 {
 152                         gpios = <&gpio5 23 GPIO_ACTIVE_LOW>;
 153                         linux,code = <KEY_4>;
 154                         label = "SW4-4";
 155                         wakeup-source;
 156                         debounce-interval = <20>;
 157                 };
 158                 key-a {
 159                         gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 160                         linux,code = <KEY_A>;
 161                         label = "TSW0";
 162                         wakeup-source;
 163                         debounce-interval = <20>;
 164                 };
 165                 key-b {
 166                         gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
 167                         linux,code = <KEY_B>;
 168                         label = "TSW1";
 169                         wakeup-source;
 170                         debounce-interval = <20>;
 171                 };
 172                 key-c {
 173                         gpios = <&gpio6 13 GPIO_ACTIVE_LOW>;
 174                         linux,code = <KEY_C>;
 175                         label = "TSW2";
 176                         wakeup-source;
 177                         debounce-interval = <20>;
 178                 };
 179         };
 180
 181         reg_1p8v: regulator-1p8v {
 182                 compatible = "regulator-fixed";
 183                 regulator-name = "fixed-1.8V";
 184                 regulator-min-microvolt = <1800000>;
 185                 regulator-max-microvolt = <1800000>;
 186                 regulator-boot-on;
 187                 regulator-always-on;
 188         };
 189
 190         reg_3p3v: regulator-3p3v {
 191                 compatible = "regulator-fixed";
 192                 regulator-name = "fixed-3.3V";
 193                 regulator-min-microvolt = <3300000>;
 194                 regulator-max-microvolt = <3300000>;
 195                 regulator-boot-on;
 196                 regulator-always-on;
 197         };
 198
 199         reg_12v: regulator-12v {
 200                 compatible = "regulator-fixed";
 201                 regulator-name = "fixed-12V";
 202                 regulator-min-microvolt = <12000000>;
 203                 regulator-max-microvolt = <12000000>;
 204                 regulator-boot-on;
 205                 regulator-always-on;
 206         };
 207
 208         sound_card: sound {
 209                 compatible = "audio-graph-card";
 210
 211                 label = "rcar-sound";
 212
 213                 dais = <&rsnd_port0     /* ak4613 */
 214                         &rsnd_port1     /* HDMI0  */
 215 #ifdef SOC_HAS_HDMI1
 216                         &rsnd_port2     /* HDMI1  */
 217 #endif
 218                         >;
 219         };
 220
 221         vbus0_usb2: regulator-vbus0-usb2 {
 222                 compatible = "regulator-fixed";
 223
 224                 regulator-name = "USB20_VBUS0";
 225                 regulator-min-microvolt = <5000000>;
 226                 regulator-max-microvolt = <5000000>;
 227
 228                 gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
 229                 enable-active-high;
 230         };
 231
 232         vcc_sdhi0: regulator-vcc-sdhi0 {
 233                 compatible = "regulator-fixed";
 234
 235                 regulator-name = "SDHI0 Vcc";
 236                 regulator-min-microvolt = <3300000>;
 237                 regulator-max-microvolt = <3300000>;
 238
 239                 gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 240                 enable-active-high;
 241         };
 242
 243         vccq_sdhi0: regulator-vccq-sdhi0 {
 244                 compatible = "regulator-gpio";
 245
 246                 regulator-name = "SDHI0 VccQ";
 247                 regulator-min-microvolt = <1800000>;
 248                 regulator-max-microvolt = <3300000>;
 249
 250                 gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 251                 gpios-states = <1>;
 252                 states = <3300000 1>, <1800000 0>;
 253         };
 254
 255         vcc_sdhi3: regulator-vcc-sdhi3 {
 256                 compatible = "regulator-fixed";
 257
 258                 regulator-name = "SDHI3 Vcc";
 259                 regulator-min-microvolt = <3300000>;
 260                 regulator-max-microvolt = <3300000>;
 261
 262                 gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
 263                 enable-active-high;
 264         };
 265
 266         vccq_sdhi3: regulator-vccq-sdhi3 {
 267                 compatible = "regulator-gpio";
 268
 269                 regulator-name = "SDHI3 VccQ";
 270                 regulator-min-microvolt = <1800000>;
 271                 regulator-max-microvolt = <3300000>;
 272
 273                 gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
 274                 gpios-states = <1>;
 275                 states = <3300000 1>, <1800000 0>;
 276         };
 277
 278         vga {
 279                 compatible = "vga-connector";
 280
 281                 port {
 282                         vga_in: endpoint {
 283                                 remote-endpoint = <&adv7123_out>;
 284                         };
 285                 };
 286         };
 287
 288         vga-encoder {
 289                 compatible = "adi,adv7123";
 290
 291                 ports {
 292                         #address-cells = <1>;
 293                         #size-cells = <0>;
 294
 295                         port@0 {
 296                                 reg = <0>;
 297                                 adv7123_in: endpoint {
 298                                         remote-endpoint = <&du_out_rgb>;
 299                                 };
 300                         };
 301                         port@1 {
 302                                 reg = <1>;
 303                                 adv7123_out: endpoint {
 304                                         remote-endpoint = <&vga_in>;
 305                                 };
 306                         };
 307                 };
 308         };
 309
 310         x12_clk: x12 {
 311                 compatible = "fixed-clock";
 312                 #clock-cells = <0>;
 313                 clock-frequency = <24576000>;
 314         };
 315
 316         /* External DU dot clocks */
 317         x21_clk: x21-clock {
 318                 compatible = "fixed-clock";
 319                 #clock-cells = <0>;
 320                 clock-frequency = <33000000>;
 321         };
 322
 323         x22_clk: x22-clock {
 324                 compatible = "fixed-clock";
 325                 #clock-cells = <0>;
 326                 clock-frequency = <33000000>;
 327         };
 328
 329         x23_clk: x23-clock {
 330                 compatible = "fixed-clock";
 331                 #clock-cells = <0>;
 332                 clock-frequency = <25000000>;
 333         };
 334 };
 335
 336 &a57_0 {
 337         cpu-supply = <&dvfs>;
 338 };
 339
 340 &audio_clk_a {
 341         clock-frequency = <22579200>;
 342 };
 343
 344 &avb {
 345         pinctrl-0 = <&avb_pins>;
 346         pinctrl-names = "default";
 347         phy-handle = <&phy0>;
 348         tx-internal-delay-ps = <2000>;
 349         status = "okay";
 350
 351         phy0: ethernet-phy@0 {
 352                 compatible = "ethernet-phy-id0022.1622",
 353                              "ethernet-phy-ieee802.3-c22";
 354                 rxc-skew-ps = <1500>;
 355                 reg = <0>;
 356                 interrupt-parent = <&gpio2>;
 357                 interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 358                 reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 359         };
 360 };
 361
 362 &csi20 {
 363         status = "okay";
 364
 365         ports {
 366                 port@0 {
 367                         csi20_in: endpoint {
 368                                 clock-lanes = <0>;
 369                                 data-lanes = <1>;
 370                                 remote-endpoint = <&adv7482_txb>;
 371                         };
 372                 };
 373         };
 374 };
 375
 376 &csi40 {
 377         status = "okay";
 378
 379         ports {
 380                 port@0 {
 381                         csi40_in: endpoint {
 382                                 clock-lanes = <0>;
 383                                 data-lanes = <1 2 3 4>;
 384                                 remote-endpoint = <&adv7482_txa>;
 385                         };
 386                 };
 387         };
 388 };
 389
 390 &du {
 391         pinctrl-0 = <&du_pins>;
 392         pinctrl-names = "default";
 393         status = "okay";
 394
 395         ports {
 396                 port@0 {
 397                         du_out_rgb: endpoint {
 398                                 remote-endpoint = <&adv7123_in>;
 399                         };
 400                 };
 401         };
 402 };
 403
 404 &ehci0 {
 405         dr_mode = "otg";
 406         status = "okay";
 407 };
 408
 409 &ehci1 {
 410         status = "okay";
 411 };
 412
 413 &extalr_clk {
 414         clock-frequency = <32768>;
 415 };
 416
 417 &hdmi0 {
 418         status = "okay";
 419
 420         ports {
 421                 port@1 {
 422                         reg = <1>;
 423                         rcar_dw_hdmi0_out: endpoint {
 424                                 remote-endpoint = <&hdmi0_con>;
 425                         };
 426                 };
 427                 port@2 {
 428                         reg = <2>;
 429                         dw_hdmi0_snd_in: endpoint {
 430                                 remote-endpoint = <&rsnd_endpoint1>;
 431                         };
 432                 };
 433         };
 434 };
 435
 436 #ifdef SOC_HAS_HDMI1
 437 &hdmi1 {
 438         status = "okay";
 439
 440         ports {
 441                 port@1 {
 442                         reg = <1>;
 443                         rcar_dw_hdmi1_out: endpoint {
 444                                 remote-endpoint = <&hdmi1_con>;
 445                         };
 446                 };
 447                 port@2 {
 448                         reg = <2>;
 449                         dw_hdmi1_snd_in: endpoint {
 450                                 remote-endpoint = <&rsnd_endpoint2>;
 451                         };
 452                 };
 453         };
 454 };
 455
 456 &hdmi1_con {
 457         remote-endpoint = <&rcar_dw_hdmi1_out>;
 458 };
 459 #endif /* SOC_HAS_HDMI1 */
 460
 461 &hscif1 {
 462         pinctrl-0 = <&hscif1_pins>;
 463         pinctrl-names = "default";
 464
 465         uart-has-rtscts;
 466         /* Please only enable hscif1 or scif1 */
 467         status = "okay";
 468 };
 469
 470 &hsusb {
 471         dr_mode = "otg";
 472         status = "okay";
 473 };
 474
 475 &i2c2 {
 476         pinctrl-0 = <&i2c2_pins>;
 477         pinctrl-names = "default";
 478
 479         status = "okay";
 480
 481         clock-frequency = <100000>;
 482
 483         ak4613: codec@10 {
 484                 compatible = "asahi-kasei,ak4613";
 485                 #sound-dai-cells = <0>;
 486                 reg = <0x10>;
 487                 clocks = <&rcar_sound 3>;
 488
 489                 asahi-kasei,in1-single-end;
 490                 asahi-kasei,in2-single-end;
 491                 asahi-kasei,out1-single-end;
 492                 asahi-kasei,out2-single-end;
 493                 asahi-kasei,out3-single-end;
 494                 asahi-kasei,out4-single-end;
 495                 asahi-kasei,out5-single-end;
 496                 asahi-kasei,out6-single-end;
 497
 498                 port {
 499                         ak4613_endpoint: endpoint {
 500                                 remote-endpoint = <&rsnd_endpoint0>;
 501                         };
 502                 };
 503         };
 504
 505         cs2000: clk_multiplier@4f {
 506                 #clock-cells = <0>;
 507                 compatible = "cirrus,cs2000-cp";
 508                 reg = <0x4f>;
 509                 clocks = <&audio_clkout>, <&x12_clk>;
 510                 clock-names = "clk_in", "ref_clk";
 511
 512                 assigned-clocks = <&cs2000>;
 513                 assigned-clock-rates = <24576000>; /* 1/1 divide */
 514         };
 515 };
 516
 517 &i2c4 {
 518         status = "okay";
 519
 520         pca9654: gpio@20 {
 521                 compatible = "onnn,pca9654";
 522                 reg = <0x20>;
 523                 gpio-controller;
 524                 #gpio-cells = <2>;
 525         };
 526
 527         video-receiver@70 {
 528                 compatible = "adi,adv7482";
 529                 reg = <0x70 0x71 0x72 0x73 0x74 0x75
 530                        0x60 0x61 0x62 0x63 0x64 0x65>;
 531                 reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
 532                             "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
 533
 534                 interrupt-parent = <&gpio6>;
 535                 interrupt-names = "intrq1", "intrq2";
 536                 interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
 537                              <31 IRQ_TYPE_LEVEL_LOW>;
 538
 539                 ports {
 540                         #address-cells = <1>;
 541                         #size-cells = <0>;
 542
 543                         port@7 {
 544                                 reg = <7>;
 545
 546                                 adv7482_ain7: endpoint {
 547                                         remote-endpoint = <&cvbs_con>;
 548                                 };
 549                         };
 550
 551                         port@8 {
 552                                 reg = <8>;
 553
 554                                 adv7482_hdmi: endpoint {
 555                                         remote-endpoint = <&hdmi_in_con>;
 556                                 };
 557                         };
 558
 559                         port@a {
 560                                 reg = <10>;
 561
 562                                 adv7482_txa: endpoint {
 563                                         clock-lanes = <0>;
 564                                         data-lanes = <1 2 3 4>;
 565                                         remote-endpoint = <&csi40_in>;
 566                                 };
 567                         };
 568
 569                         port@b {
 570                                 reg = <11>;
 571
 572                                 adv7482_txb: endpoint {
 573                                         clock-lanes = <0>;
 574                                         data-lanes = <1>;
 575                                         remote-endpoint = <&csi20_in>;
 576                                 };
 577                         };
 578                 };
 579         };
 580
 581         csa_vdd: adc@7c {
 582                 compatible = "maxim,max9611";
 583                 reg = <0x7c>;
 584
 585                 shunt-resistor-micro-ohms = <5000>;
 586         };
 587
 588         csa_dvfs: adc@7f {
 589                 compatible = "maxim,max9611";
 590                 reg = <0x7f>;
 591
 592                 shunt-resistor-micro-ohms = <5000>;
 593         };
 594 };
 595
 596 &i2c_dvfs {
 597         status = "okay";
 598
 599         clock-frequency = <400000>;
 600
 601         pmic: pmic@30 {
 602                 pinctrl-0 = <&irq0_pins>;
 603                 pinctrl-names = "default";
 604
 605                 compatible = "rohm,bd9571mwv";
 606                 reg = <0x30>;
 607                 interrupt-parent = <&intc_ex>;
 608                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 609                 interrupt-controller;
 610                 #interrupt-cells = <2>;
 611                 gpio-controller;
 612                 #gpio-cells = <2>;
 613                 rohm,ddr-backup-power = <0xf>;
 614                 rohm,rstbmode-level;
 615
 616                 regulators {
 617                         dvfs: dvfs {
 618                                 regulator-name = "dvfs";
 619                                 regulator-min-microvolt = <750000>;
 620                                 regulator-max-microvolt = <1030000>;
 621                                 regulator-boot-on;
 622                                 regulator-always-on;
 623                         };
 624                 };
 625         };
 626
 627         eeprom@50 {
 628                 compatible = "rohm,br24t01", "atmel,24c01";
 629                 reg = <0x50>;
 630                 pagesize = <8>;
 631         };
 632 };
 633
 634 &ohci0 {
 635         dr_mode = "otg";
 636         status = "okay";
 637 };
 638
 639 &ohci1 {
 640         status = "okay";
 641 };
 642
 643 &pcie_bus_clk {
 644         clock-frequency = <100000000>;
 645 };
 646
 647 &pciec0 {
 648         status = "okay";
 649 };
 650
 651 &pciec1 {
 652         status = "okay";
 653 };
 654
 655 &pfc {
 656         pinctrl-0 = <&scif_clk_pins>;
 657         pinctrl-names = "default";
 658
 659         avb_pins: avb {
 660                 mux {
 661                         groups = "avb_link", "avb_mdio", "avb_mii";
 662                         function = "avb";
 663                 };
 664
 665                 pins_mdio {
 666                         groups = "avb_mdio";
 667                         drive-strength = <24>;
 668                 };
 669
 670                 pins_mii_tx {
 671                         pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
 672                                "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
 673                         drive-strength = <12>;
 674                 };
 675         };
 676
 677         du_pins: du {
 678                 groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
 679                 function = "du";
 680         };
 681
 682         hscif1_pins: hscif1 {
 683                 groups = "hscif1_data_a", "hscif1_ctrl_a";
 684                 function = "hscif1";
 685         };
 686
 687         i2c2_pins: i2c2 {
 688                 groups = "i2c2_a";
 689                 function = "i2c2";
 690         };
 691
 692         irq0_pins: irq0 {
 693                 groups = "intc_ex_irq0";
 694                 function = "intc_ex";
 695         };
 696
 697         keys_pins: keys {
 698                 pins = "GP_5_17", "GP_5_20", "GP_5_22";
 699                 bias-pull-up;
 700         };
 701
 702         pwm1_pins: pwm1 {
 703                 groups = "pwm1_a";
 704                 function = "pwm1";
 705         };
 706
 707         scif1_pins: scif1 {
 708                 groups = "scif1_data_a", "scif1_ctrl";
 709                 function = "scif1";
 710         };
 711
 712         scif2_pins: scif2 {
 713                 groups = "scif2_data_a";
 714                 function = "scif2";
 715         };
 716
 717         scif_clk_pins: scif_clk {
 718                 groups = "scif_clk_a";
 719                 function = "scif_clk";
 720         };
 721
 722         sdhi0_pins: sd0 {
 723                 groups = "sdhi0_data4", "sdhi0_ctrl";
 724                 function = "sdhi0";
 725                 power-source = <3300>;
 726         };
 727
 728         sdhi0_pins_uhs: sd0_uhs {
 729                 groups = "sdhi0_data4", "sdhi0_ctrl";
 730                 function = "sdhi0";
 731                 power-source = <1800>;
 732         };
 733
 734         sdhi2_pins: sd2 {
 735                 groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 736                 function = "sdhi2";
 737                 power-source = <1800>;
 738         };
 739
 740         sdhi3_pins: sd3 {
 741                 groups = "sdhi3_data4", "sdhi3_ctrl";
 742                 function = "sdhi3";
 743                 power-source = <3300>;
 744         };
 745
 746         sdhi3_pins_uhs: sd3_uhs {
 747                 groups = "sdhi3_data4", "sdhi3_ctrl";
 748                 function = "sdhi3";
 749                 power-source = <1800>;
 750         };
 751
 752         sound_pins: sound {
 753                 groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
 754                 function = "ssi";
 755         };
 756
 757         sound_clk_pins: sound_clk {
 758                 groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
 759                          "audio_clkout_a", "audio_clkout3_a";
 760                 function = "audio_clk";
 761         };
 762
 763         usb0_pins: usb0 {
 764                 groups = "usb0";
 765                 function = "usb0";
 766         };
 767
 768         usb1_pins: usb1 {
 769                 mux {
 770                         groups = "usb1";
 771                         function = "usb1";
 772                 };
 773
 774                 ovc {
 775                         pins = "GP_6_27";
 776                         bias-pull-up;
 777                 };
 778
 779                 pwen {
 780                         pins = "GP_6_26";
 781                         bias-pull-down;
 782                 };
 783         };
 784
 785         usb30_pins: usb30 {
 786                 groups = "usb30";
 787                 function = "usb30";
 788         };
 789 };
 790
 791 &pwm1 {
 792         pinctrl-0 = <&pwm1_pins>;
 793         pinctrl-names = "default";
 794
 795         status = "okay";
 796 };
 797
 798 &rcar_sound {
 799         pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
 800         pinctrl-names = "default";
 801
 802         /* audio_clkout0/1/2/3 */
 803         #clock-cells = <1>;
 804         clock-frequency = <12288000 11289600>;
 805
 806         status = "okay";
 807
 808         /* update <audio_clk_b> to <cs2000> */
 809         clocks = <&cpg CPG_MOD 1005>,
 810                  <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
 811                  <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
 812                  <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
 813                  <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
 814                  <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
 815                  <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
 816                  <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
 817                  <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
 818                  <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
 819                  <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
 820                  <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
 821                  <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
 822                  <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 823                  <&audio_clk_a>, <&cs2000>,
 824                  <&audio_clk_c>,
 825                  <&cpg CPG_MOD 922>;
 826
 827         ports {
 828                 #address-cells = <1>;
 829                 #size-cells = <0>;
 830                 rsnd_port0: port@0 {
 831                         reg = <0>;
 832                         rsnd_endpoint0: endpoint {
 833                                 remote-endpoint = <&ak4613_endpoint>;
 834
 835                                 dai-format = "left_j";
 836                                 bitclock-master = <&rsnd_endpoint0>;
 837                                 frame-master = <&rsnd_endpoint0>;
 838
 839                                 playback = <&ssi0>, <&src0>, <&dvc0>;
 840                                 capture = <&ssi1>, <&src1>, <&dvc1>;
 841                         };
 842                 };
 843
 844                 rsnd_port1: port@1 {
 845                         reg = <1>;
 846                         rsnd_endpoint1: endpoint {
 847                                 remote-endpoint = <&dw_hdmi0_snd_in>;
 848
 849                                 dai-format = "i2s";
 850                                 bitclock-master = <&rsnd_endpoint1>;
 851                                 frame-master = <&rsnd_endpoint1>;
 852
 853                                 playback = <&ssi2>;
 854                         };
 855                 };
 856
 857 #ifdef SOC_HAS_HDMI1
 858                 rsnd_port2: port@2 {
 859                         reg = <2>;
 860                         rsnd_endpoint2: endpoint {
 861                                 remote-endpoint = <&dw_hdmi1_snd_in>;
 862
 863                                 dai-format = "i2s";
 864                                 bitclock-master = <&rsnd_endpoint2>;
 865                                 frame-master = <&rsnd_endpoint2>;
 866
 867                                 playback = <&ssi3>;
 868                         };
 869                 };
 870 #endif /* SOC_HAS_HDMI1 */
 871         };
 872 };
 873
 874 &rpc {
 875         /* Left disabled.  To be enabled by firmware when unlocked. */
 876
 877         flash@0 {
 878                 compatible = "cypress,hyperflash", "cfi-flash";
 879                 reg = <0>;
 880
 881                 partitions {
 882                         compatible = "fixed-partitions";
 883                         #address-cells = <1>;
 884                         #size-cells = <1>;
 885
 886                         bootparam@0 {
 887                                 reg = <0x00000000 0x040000>;
 888                                 read-only;
 889                         };
 890                         bl2@40000 {
 891                                 reg = <0x00040000 0x140000>;
 892                                 read-only;
 893                         };
 894                         cert_header_sa6@180000 {
 895                                 reg = <0x00180000 0x040000>;
 896                                 read-only;
 897                         };
 898                         bl31@1c0000 {
 899                                 reg = <0x001c0000 0x040000>;
 900                                 read-only;
 901                         };
 902                         tee@200000 {
 903                                 reg = <0x00200000 0x440000>;
 904                                 read-only;
 905                         };
 906                         uboot@640000 {
 907                                 reg = <0x00640000 0x100000>;
 908                                 read-only;
 909                         };
 910                         dtb@740000 {
 911                                 reg = <0x00740000 0x080000>;
 912                         };
 913                         kernel@7c0000 {
 914                                 reg = <0x007c0000 0x1400000>;
 915                         };
 916                         user@1bc0000 {
 917                                 reg = <0x01bc0000 0x2440000>;
 918                         };
 919                 };
 920         };
 921 };
 922
 923 &rwdt {
 924         timeout-sec = <60>;
 925         status = "okay";
 926 };
 927
 928 #ifdef SOC_HAS_SATA
 929 &sata {
 930         status = "okay";
 931 };
 932 #endif /* SOC_HAS_SATA */
 933
 934 &scif1 {
 935         pinctrl-0 = <&scif1_pins>;
 936         pinctrl-names = "default";
 937
 938         uart-has-rtscts;
 939         /* Please only enable hscif1 or scif1 */
 940         /* status = "okay"; */
 941 };
 942
 943 &scif2 {
 944         pinctrl-0 = <&scif2_pins>;
 945         pinctrl-names = "default";
 946
 947         status = "okay";
 948 };
 949
 950 &scif_clk {
 951         clock-frequency = <14745600>;
 952 };
 953
 954 &sdhi0 {
 955         pinctrl-0 = <&sdhi0_pins>;
 956         pinctrl-1 = <&sdhi0_pins_uhs>;
 957         pinctrl-names = "default", "state_uhs";
 958
 959         vmmc-supply = <&vcc_sdhi0>;
 960         vqmmc-supply = <&vccq_sdhi0>;
 961         cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 962         wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 963         bus-width = <4>;
 964         sd-uhs-sdr50;
 965         sd-uhs-sdr104;
 966         status = "okay";
 967 };
 968
 969 &sdhi2 {
 970         /* used for on-board 8bit eMMC */
 971         pinctrl-0 = <&sdhi2_pins>;
 972         pinctrl-1 = <&sdhi2_pins>;
 973         pinctrl-names = "default", "state_uhs";
 974
 975         vmmc-supply = <&reg_3p3v>;
 976         vqmmc-supply = <&reg_1p8v>;
 977         bus-width = <8>;
 978         mmc-hs200-1_8v;
 979         mmc-hs400-1_8v;
 980         no-sd;
 981         no-sdio;
 982         non-removable;
 983         fixed-emmc-driver-type = <1>;
 984         full-pwr-cycle-in-suspend;
 985         status = "okay";
 986 };
 987
 988 &sdhi3 {
 989         pinctrl-0 = <&sdhi3_pins>;
 990         pinctrl-1 = <&sdhi3_pins_uhs>;
 991         pinctrl-names = "default", "state_uhs";
 992
 993         vmmc-supply = <&vcc_sdhi3>;
 994         vqmmc-supply = <&vccq_sdhi3>;
 995         cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 996         wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
 997         bus-width = <4>;
 998         sd-uhs-sdr50;
 999         sd-uhs-sdr104;
1000         status = "okay";
1001 };
1002
1003 &ssi1 {
1004         shared-pin;
1005 };
1006
1007 &usb_extal_clk {
1008         clock-frequency = <50000000>;
1009 };
1010
1011 &usb2_phy0 {
1012         pinctrl-0 = <&usb0_pins>;
1013         pinctrl-names = "default";
1014
1015         vbus-supply = <&vbus0_usb2>;
1016         status = "okay";
1017 };
1018
1019 &usb2_phy1 {
1020         pinctrl-0 = <&usb1_pins>;
1021         pinctrl-names = "default";
1022
1023         status = "okay";
1024 };
1025
1026 &usb3_peri0 {
1027         phys = <&usb3_phy0>;
1028         phy-names = "usb";
1029
1030         companion = <&xhci0>;
1031
1032         status = "okay";
1033 };
1034
1035 &usb3_phy0 {
1036         status = "okay";
1037 };
1038
1039 &usb3s0_clk {
1040         clock-frequency = <100000000>;
1041 };
1042
1043 &vin0 {
1044         status = "okay";
1045 };
1046
1047 &vin1 {
1048         status = "okay";
1049 };
1050
1051 &vin2 {
1052         status = "okay";
1053 };
1054
1055 &vin3 {
1056         status = "okay";
1057 };
1058
1059 &vin4 {
1060         status = "okay";
1061 };
1062
1063 &vin5 {
1064         status = "okay";
1065 };
1066
1067 &vin6 {
1068         status = "okay";
1069 };
1070
1071 &vin7 {
1072         status = "okay";
1073 };
1074
1075 &xhci0 {
1076         pinctrl-0 = <&usb30_pins>;
1077         pinctrl-names = "default";
1078
1079         status = "okay";
1080 };
1081
1082 #ifdef SOC_HAS_USB2_CH2
1083 &ehci2 {
1084         status = "okay";
1085 };
1086
1087 &ohci2 {
1088         status = "okay";
1089 };
1090
1091 &pfc {
1092         usb2_pins: usb2 {
1093                 groups = "usb2";
1094                 function = "usb2";
1095         };
1096 };
1097
1098 &usb2_phy2 {
1099         pinctrl-0 = <&usb2_pins>;
1100         pinctrl-names = "default";
1101
1102         status = "okay";
1103 };
1104 #endif /* SOC_HAS_USB2_CH2 */