src/arm64/rockchip/rk3566-anbernic-rgxx3.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2
   3 /dts-v1/;
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/linux-event-codes.h>
   7 #include <dt-bindings/leds/common.h>
   8 #include <dt-bindings/pinctrl/rockchip.h>
   9 #include <dt-bindings/soc/rockchip,vop2.h>
  10 #include "rk3566.dtsi"
  11
  12 / {
  13         chosen: chosen {
  14                 stdout-path = "serial2:1500000n8";
  15         };
  16
  17         adc-joystick {
  18                 compatible = "adc-joystick";
  19                 io-channels = <&adc_mux 0>,
  20                               <&adc_mux 1>,
  21                               <&adc_mux 2>,
  22                               <&adc_mux 3>;
  23                 pinctrl-0 = <&joy_mux_en>;
  24                 pinctrl-names = "default";
  25                 poll-interval = <60>;
  26                 #address-cells = <1>;
  27                 #size-cells = <0>;
  28
  29                 axis@0 {
  30                         reg = <0>;
  31                         abs-flat = <32>;
  32                         abs-fuzz = <32>;
  33                         abs-range = <1023 15>;
  34                         linux,code = <ABS_X>;
  35                 };
  36
  37                 axis@1 {
  38                         reg = <1>;
  39                         abs-flat = <32>;
  40                         abs-fuzz = <32>;
  41                         abs-range = <15 1023>;
  42                         linux,code = <ABS_RX>;
  43                 };
  44
  45                 axis@2 {
  46                         reg = <2>;
  47                         abs-flat = <32>;
  48                         abs-fuzz = <32>;
  49                         abs-range = <15 1023>;
  50                         linux,code = <ABS_Y>;
  51                 };
  52
  53                 axis@3 {
  54                         reg = <3>;
  55                         abs-flat = <32>;
  56                         abs-fuzz = <32>;
  57                         abs-range = <1023 15>;
  58                         linux,code = <ABS_RY>;
  59                 };
  60         };
  61
  62         adc_keys: adc-keys {
  63                 compatible = "adc-keys";
  64                 io-channels = <&saradc 0>;
  65                 io-channel-names = "buttons";
  66                 keyup-threshold-microvolt = <1800000>;
  67                 poll-interval = <60>;
  68
  69                 /*
  70                  * Button is mapped to F key in BSP kernel, but
  71                  * according to input guidelines it should be mode.
  72                  */
  73                 button-mode {
  74                         label = "MODE";
  75                         linux,code = <BTN_MODE>;
  76                         press-threshold-microvolt = <1750>;
  77                 };
  78         };
  79
  80         adc_mux: adc-mux {
  81                 compatible = "io-channel-mux";
  82                 channels = "left_x", "right_x", "left_y", "right_y";
  83                 #io-channel-cells = <1>;
  84                 io-channels = <&saradc 3>;
  85                 io-channel-names = "parent";
  86                 mux-controls = <&gpio_mux>;
  87                 settle-time-us = <100>;
  88         };
  89
  90         gpio_keys_control: gpio-keys-control {
  91                 compatible = "gpio-keys";
  92                 pinctrl-0 = <&btn_pins_ctrl>;
  93                 pinctrl-names = "default";
  94
  95                 button-b {
  96                         gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
  97                         label = "SOUTH";
  98                         linux,code = <BTN_SOUTH>;
  99                 };
 100
 101                 button-down {
 102                         gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>;
 103                         label = "DPAD-DOWN";
 104                         linux,code = <BTN_DPAD_DOWN>;
 105                 };
 106
 107                 button-l1 {
 108                         gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
 109                         label = "TL";
 110                         linux,code = <BTN_TL>;
 111                 };
 112
 113                 button-l2 {
 114                         gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
 115                         label = "TL2";
 116                         linux,code = <BTN_TL2>;
 117                 };
 118
 119                 button-select {
 120                         gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
 121                         label = "SELECT";
 122                         linux,code = <BTN_SELECT>;
 123                 };
 124
 125                 button-start {
 126                         gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
 127                         label = "START";
 128                         linux,code = <BTN_START>;
 129                 };
 130
 131                 button-thumbl {
 132                         gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
 133                         label = "THUMBL";
 134                         linux,code = <BTN_THUMBL>;
 135                 };
 136
 137                 button-thumbr {
 138                         gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
 139                         label = "THUMBR";
 140                         linux,code = <BTN_THUMBR>;
 141                 };
 142
 143                 button-up {
 144                         gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
 145                         label = "DPAD-UP";
 146                         linux,code = <BTN_DPAD_UP>;
 147                 };
 148
 149                 button-x {
 150                         gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
 151                         label = "NORTH";
 152                         linux,code = <BTN_NORTH>;
 153                 };
 154         };
 155
 156         gpio_keys_vol: gpio-keys-vol {
 157                 compatible = "gpio-keys";
 158                 autorepeat;
 159                 pinctrl-0 = <&btn_pins_vol>;
 160                 pinctrl-names = "default";
 161
 162                 button-vol-down {
 163                         gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
 164                         label = "VOLUMEDOWN";
 165                         linux,code = <KEY_VOLUMEDOWN>;
 166                 };
 167
 168                 button-vol-up {
 169                         gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
 170                         label = "VOLUMEUP";
 171                         linux,code = <KEY_VOLUMEUP>;
 172                 };
 173         };
 174
 175         gpio_mux: mux-controller {
 176                 compatible = "gpio-mux";
 177                 mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
 178                             <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
 179                 #mux-control-cells = <0>;
 180         };
 181
 182         hdmi-con {
 183                 compatible = "hdmi-connector";
 184                 ddc-i2c-bus = <&i2c5>;
 185                 type = "c";
 186
 187                 port {
 188                         hdmi_con_in: endpoint {
 189                                 remote-endpoint = <&hdmi_out_con>;
 190                         };
 191                 };
 192         };
 193
 194         leds: pwm-leds {
 195                 compatible = "pwm-leds";
 196
 197                 green_led: led-0 {
 198                         color = <LED_COLOR_ID_GREEN>;
 199                         default-state = "on";
 200                         function = LED_FUNCTION_POWER;
 201                         max-brightness = <255>;
 202                         pwms = <&pwm6 0 25000 0>;
 203                 };
 204
 205                 amber_led: led-1 {
 206                         color = <LED_COLOR_ID_AMBER>;
 207                         function = LED_FUNCTION_CHARGING;
 208                         max-brightness = <255>;
 209                         pwms = <&pwm7 0 25000 0>;
 210                 };
 211
 212                 red_led: led-2 {
 213                         color = <LED_COLOR_ID_RED>;
 214                         default-state = "off";
 215                         function = LED_FUNCTION_STATUS;
 216                         max-brightness = <255>;
 217                         pwms = <&pwm0 0 25000 0>;
 218                 };
 219         };
 220
 221         sdio_pwrseq: sdio-pwrseq {
 222                 compatible = "mmc-pwrseq-simple";
 223                 clocks = <&rk817 1>;
 224                 clock-names = "ext_clock";
 225                 pinctrl-0 = <&wifi_enable_h>;
 226                 pinctrl-names = "default";
 227                 post-power-on-delay-ms = <200>;
 228                 reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
 229         };
 230
 231         vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 {
 232                 compatible = "regulator-fixed";
 233                 gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
 234                 enable-active-high;
 235                 pinctrl-0 = <&vcc_lcd_h>;
 236                 pinctrl-names = "default";
 237                 regulator-boot-on;
 238                 regulator-min-microvolt = <3300000>;
 239                 regulator-max-microvolt = <3300000>;
 240                 regulator-name = "vcc3v3_lcd0_n";
 241                 vin-supply = <&vcc_3v3>;
 242                 regulator-state-mem {
 243                         regulator-off-in-suspend;
 244                 };
 245         };
 246
 247         vcc_sys: regulator-vcc-sys {
 248                 compatible = "regulator-fixed";
 249                 regulator-always-on;
 250                 regulator-boot-on;
 251                 regulator-min-microvolt = <3800000>;
 252                 regulator-max-microvolt = <3800000>;
 253                 regulator-name = "vcc_sys";
 254         };
 255
 256         vcc_wifi: regulator-vcc-wifi {
 257                 compatible = "regulator-fixed";
 258                 enable-active-high;
 259                 gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
 260                 pinctrl-0 = <&vcc_wifi_h>;
 261                 pinctrl-names = "default";
 262                 regulator-always-on;
 263                 regulator-boot-on;
 264                 regulator-min-microvolt = <3300000>;
 265                 regulator-max-microvolt = <3300000>;
 266                 regulator-name = "vcc_wifi";
 267         };
 268
 269         vibrator: pwm-vibrator {
 270                 compatible = "pwm-vibrator";
 271                 pwm-names = "enable";
 272                 pwms = <&pwm5 0 1000000000 0>;
 273         };
 274 };
 275
 276 &combphy1 {
 277         status = "okay";
 278 };
 279
 280 &cpu0 {
 281         cpu-supply = <&vdd_cpu>;
 282 };
 283
 284 &cpu1 {
 285         cpu-supply = <&vdd_cpu>;
 286 };
 287
 288 &cpu2 {
 289         cpu-supply = <&vdd_cpu>;
 290 };
 291
 292 &cpu3 {
 293         cpu-supply = <&vdd_cpu>;
 294 };
 295
 296 &gpu {
 297         mali-supply = <&vdd_gpu>;
 298         status = "okay";
 299 };
 300
 301 &hdmi {
 302         ddc-i2c-bus = <&i2c5>;
 303         pinctrl-0 = <&hdmitxm0_cec>;
 304         pinctrl-names = "default";
 305         status = "okay";
 306 };
 307
 308 &hdmi_in {
 309         hdmi_in_vp0: endpoint {
 310                 remote-endpoint = <&vp0_out_hdmi>;
 311         };
 312 };
 313
 314 &hdmi_out {
 315         hdmi_out_con: endpoint {
 316                 remote-endpoint = <&hdmi_con_in>;
 317         };
 318 };
 319
 320 &hdmi_sound {
 321         status = "okay";
 322 };
 323
 324 &i2c0 {
 325         status = "okay";
 326
 327         rk817: pmic@20 {
 328                 compatible = "rockchip,rk817";
 329                 reg = <0x20>;
 330                 interrupt-parent = <&gpio0>;
 331                 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
 332                 clock-output-names = "rk808-clkout1", "rk808-clkout2";
 333                 clock-names = "mclk";
 334                 clocks = <&cru I2S1_MCLKOUT_TX>;
 335                 assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
 336                 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
 337                 #clock-cells = <1>;
 338                 #sound-dai-cells = <0>;
 339                 pinctrl-names = "default";
 340                 pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>;
 341                 wakeup-source;
 342
 343                 vcc1-supply = <&vcc_sys>;
 344                 vcc2-supply = <&vcc_sys>;
 345                 vcc3-supply = <&vcc_sys>;
 346                 vcc4-supply = <&vcc_sys>;
 347                 vcc5-supply = <&vcc_sys>;
 348                 vcc6-supply = <&vcc_sys>;
 349                 vcc7-supply = <&vcc_sys>;
 350                 vcc8-supply = <&vcc_sys>;
 351                 vcc9-supply = <&dcdc_boost>;
 352
 353                 regulators {
 354                         vdd_logic: DCDC_REG1 {
 355                                 regulator-always-on;
 356                                 regulator-boot-on;
 357                                 regulator-min-microvolt = <500000>;
 358                                 regulator-max-microvolt = <1350000>;
 359                                 regulator-ramp-delay = <6001>;
 360                                 regulator-initial-mode = <0x2>;
 361                                 regulator-name = "vdd_logic";
 362                                 regulator-state-mem {
 363                                         regulator-off-in-suspend;
 364                                         regulator-suspend-microvolt = <900000>;
 365                                 };
 366                         };
 367
 368                         vdd_gpu: DCDC_REG2 {
 369                                 regulator-always-on;
 370                                 regulator-boot-on;
 371                                 regulator-min-microvolt = <500000>;
 372                                 regulator-max-microvolt = <1350000>;
 373                                 regulator-ramp-delay = <6001>;
 374                                 regulator-initial-mode = <0x2>;
 375                                 regulator-name = "vdd_gpu";
 376                                 regulator-state-mem {
 377                                         regulator-off-in-suspend;
 378                                 };
 379                         };
 380
 381                         vcc_ddr: DCDC_REG3 {
 382                                 regulator-always-on;
 383                                 regulator-boot-on;
 384                                 regulator-initial-mode = <0x2>;
 385                                 regulator-name = "vcc_ddr";
 386                                 regulator-state-mem {
 387                                         regulator-on-in-suspend;
 388                                 };
 389                         };
 390
 391                         vcc_3v3: DCDC_REG4 {
 392                                 regulator-always-on;
 393                                 regulator-boot-on;
 394                                 regulator-min-microvolt = <3300000>;
 395                                 regulator-max-microvolt = <3300000>;
 396                                 regulator-initial-mode = <0x2>;
 397                                 regulator-name = "vcc_3v3";
 398                                 regulator-state-mem {
 399                                         regulator-on-in-suspend;
 400                                         regulator-suspend-microvolt = <3300000>;
 401                                 };
 402                         };
 403
 404                         vcca1v8_pmu: LDO_REG1 {
 405                                 regulator-always-on;
 406                                 regulator-boot-on;
 407                                 regulator-min-microvolt = <1800000>;
 408                                 regulator-max-microvolt = <1800000>;
 409                                 regulator-name = "vcca1v8_pmu";
 410                                 regulator-state-mem {
 411                                         regulator-on-in-suspend;
 412                                         regulator-suspend-microvolt = <1800000>;
 413                                 };
 414                         };
 415
 416                         vdda_0v9: LDO_REG2 {
 417                                 regulator-always-on;
 418                                 regulator-boot-on;
 419                                 regulator-min-microvolt = <900000>;
 420                                 regulator-max-microvolt = <900000>;
 421                                 regulator-name = "vdda_0v9";
 422                                 regulator-state-mem {
 423                                         regulator-off-in-suspend;
 424                                 };
 425                         };
 426
 427                         vdda0v9_pmu: LDO_REG3 {
 428                                 regulator-always-on;
 429                                 regulator-boot-on;
 430                                 regulator-min-microvolt = <900000>;
 431                                 regulator-max-microvolt = <900000>;
 432                                 regulator-name = "vdda0v9_pmu";
 433                                 regulator-state-mem {
 434                                         regulator-on-in-suspend;
 435                                         regulator-suspend-microvolt = <900000>;
 436                                 };
 437                         };
 438
 439                         vccio_acodec: LDO_REG4 {
 440                                 regulator-always-on;
 441                                 regulator-boot-on;
 442                                 regulator-min-microvolt = <3300000>;
 443                                 regulator-max-microvolt = <3300000>;
 444                                 regulator-name = "vccio_acodec";
 445                                 regulator-state-mem {
 446                                         regulator-off-in-suspend;
 447                                 };
 448                         };
 449
 450                         vccio_sd: LDO_REG5 {
 451                                 regulator-always-on;
 452                                 regulator-boot-on;
 453                                 regulator-min-microvolt = <1800000>;
 454                                 regulator-max-microvolt = <3300000>;
 455                                 regulator-name = "vccio_sd";
 456                                 regulator-state-mem {
 457                                         regulator-off-in-suspend;
 458                                 };
 459                         };
 460
 461                         vcc3v3_pmu: LDO_REG6 {
 462                                 regulator-always-on;
 463                                 regulator-boot-on;
 464                                 regulator-min-microvolt = <3300000>;
 465                                 regulator-max-microvolt = <3300000>;
 466                                 regulator-name = "vcc3v3_pmu";
 467                                 regulator-state-mem {
 468                                         regulator-on-in-suspend;
 469                                         regulator-suspend-microvolt = <3300000>;
 470                                 };
 471                         };
 472
 473                         vcc_1v8: LDO_REG7 {
 474                                 regulator-always-on;
 475                                 regulator-boot-on;
 476                                 regulator-min-microvolt = <1800000>;
 477                                 regulator-max-microvolt = <1800000>;
 478                                 regulator-name = "vcc_1v8";
 479                                 regulator-state-mem {
 480                                         regulator-off-in-suspend;
 481                                 };
 482                         };
 483
 484                         vcc1v8_dvp: LDO_REG8 {
 485                                 regulator-always-on;
 486                                 regulator-boot-on;
 487                                 regulator-min-microvolt = <1800000>;
 488                                 regulator-max-microvolt = <3300000>;
 489                                 regulator-name = "vcc1v8_dvp";
 490                                 regulator-state-mem {
 491                                         regulator-off-in-suspend;
 492                                 };
 493                         };
 494
 495                         vcc2v8_dvp: LDO_REG9 {
 496                                 regulator-always-on;
 497                                 regulator-boot-on;
 498                                 regulator-min-microvolt = <2800000>;
 499                                 regulator-max-microvolt = <2800000>;
 500                                 regulator-name = "vcc2v8_dvp";
 501                                 regulator-state-mem {
 502                                         regulator-off-in-suspend;
 503                                 };
 504                         };
 505
 506                         dcdc_boost: BOOST {
 507                                 regulator-always-on;
 508                                 regulator-boot-on;
 509                                 regulator-min-microvolt = <4700000>;
 510                                 regulator-max-microvolt = <5400000>;
 511                                 regulator-name = "boost";
 512                                 regulator-state-mem {
 513                                         regulator-off-in-suspend;
 514                                 };
 515                         };
 516
 517                         otg_switch: OTG_SWITCH {
 518                                 regulator-name = "otg_switch";
 519                                 regulator-state-mem {
 520                                         regulator-off-in-suspend;
 521                                 };
 522                         };
 523                 };
 524         };
 525
 526         vdd_cpu: regulator@40 {
 527                 compatible = "fcs,fan53555";
 528                 reg = <0x40>;
 529                 fcs,suspend-voltage-selector = <1>;
 530                 regulator-always-on;
 531                 regulator-boot-on;
 532                 regulator-min-microvolt = <712500>;
 533                 regulator-max-microvolt = <1390000>;
 534                 regulator-name = "vdd_cpu";
 535                 regulator-ramp-delay = <2300>;
 536                 vin-supply = <&vcc_sys>;
 537                 regulator-state-mem {
 538                         regulator-off-in-suspend;
 539                 };
 540         };
 541 };
 542
 543 &i2c1 {
 544         /* Unknown/unused device at 0x3c */
 545         status = "disabled";
 546 };
 547
 548 &i2c5 {
 549         pinctrl-0 = <&i2c5m1_xfer>;
 550         pinctrl-names = "default";
 551         status = "okay";
 552 };
 553
 554 &i2s0_8ch {
 555         status = "okay";
 556 };
 557
 558 &i2s1_8ch {
 559         pinctrl-0 = <&i2s1m0_sclktx
 560                      &i2s1m0_lrcktx
 561                      &i2s1m0_sdi0
 562                      &i2s1m0_sdo0>;
 563         pinctrl-names = "default";
 564         rockchip,trcm-sync-tx-only;
 565         status = "okay";
 566 };
 567
 568 &pinctrl {
 569         gpio-btns {
 570                 btn_pins_ctrl: btn-pins-ctrl {
 571                         rockchip,pins =
 572                                 <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
 573                                 <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
 574                                 <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
 575                                 <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
 576                                 <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
 577                                 <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
 578                                 <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
 579                                 <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
 580                                 <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
 581                                 <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
 582                                 <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
 583                                 <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
 584                                 <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
 585                                 <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
 586                                 <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
 587                                 <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
 588                 };
 589
 590                 btn_pins_vol: btn-pins-vol {
 591                         rockchip,pins =
 592                         <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
 593                         <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
 594                 };
 595         };
 596
 597         joy-mux {
 598                 joy_mux_en: joy-mux-en {
 599                         rockchip,pins =
 600                                 <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
 601                 };
 602         };
 603
 604         pmic {
 605                 pmic_int_l: pmic-int-l {
 606                         rockchip,pins =
 607                                 <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 608                 };
 609         };
 610
 611         sdio-pwrseq {
 612                 wifi_enable_h: wifi-enable-h {
 613                         rockchip,pins =
 614                                 <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 615                 };
 616         };
 617
 618         vcc3v3-lcd {
 619                 vcc_lcd_h: vcc-lcd-h {
 620                         rockchip,pins =
 621                                 <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
 622                 };
 623         };
 624
 625         vcc-wifi {
 626                 vcc_wifi_h: vcc-wifi-h {
 627                         rockchip,pins =
 628                                 <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 629                 };
 630         };
 631 };
 632
 633 &pmu_io_domains {
 634         status = "okay";
 635         pmuio1-supply = <&vcc3v3_pmu>;
 636         pmuio2-supply = <&vcc3v3_pmu>;
 637         vccio1-supply = <&vccio_acodec>;
 638         vccio3-supply = <&vccio_sd>;
 639         vccio4-supply = <&vcc_1v8>;
 640         vccio5-supply = <&vcc_3v3>;
 641         vccio6-supply = <&vcc1v8_dvp>;
 642         vccio7-supply = <&vcc_3v3>;
 643 };
 644
 645 &pwm0 {
 646         pinctrl-0 = <&pwm0m1_pins>;
 647         pinctrl-names = "default";
 648         status = "okay";
 649 };
 650
 651 &pwm5 {
 652         status = "okay";
 653 };
 654
 655 &pwm6 {
 656         status = "okay";
 657 };
 658
 659 &pwm7 {
 660         status = "okay";
 661 };
 662
 663 &saradc {
 664         vref-supply = <&vcc_1v8>;
 665         status = "okay";
 666 };
 667
 668 &sdmmc0 {
 669         bus-width = <4>;
 670         cap-sd-highspeed;
 671         cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 672         disable-wp;
 673         pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
 674         pinctrl-names = "default";
 675         sd-uhs-sdr104;
 676         vmmc-supply = <&vcc_3v3>;
 677         vqmmc-supply = <&vccio_sd>;
 678         status = "okay";
 679 };
 680
 681 &sdmmc1 {
 682         bus-width = <4>;
 683         cap-sd-highspeed;
 684         cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
 685         disable-wp;
 686         pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>;
 687         pinctrl-names = "default";
 688         sd-uhs-sdr104;
 689         vmmc-supply = <&vcc_3v3>;
 690         vqmmc-supply = <&vcc1v8_dvp>;
 691         status = "okay";
 692 };
 693
 694 &sdmmc2 {
 695         bus-width = <4>;
 696         cap-sd-highspeed;
 697         cap-sdio-irq;
 698         keep-power-in-suspend;
 699         mmc-pwrseq = <&sdio_pwrseq>;
 700         non-removable;
 701         pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
 702         pinctrl-names = "default";
 703         vmmc-supply = <&vcc_wifi>;
 704         vqmmc-supply = <&vcca1v8_pmu>;
 705         status = "okay";
 706 };
 707
 708 &tsadc {
 709         rockchip,hw-tshut-mode = <1>;
 710         rockchip,hw-tshut-polarity = <0>;
 711         status = "okay";
 712 };
 713
 714 &uart1 {
 715         pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
 716         pinctrl-names = "default";
 717         uart-has-rtscts;
 718         status = "okay";
 719
 720         bluetooth {
 721                 compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
 722                 device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
 723                 enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
 724                 host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
 725         };
 726 };
 727
 728 &uart2 {
 729         status = "okay";
 730 };
 731
 732 /*
 733  * Lack the schematics to verify, but port works as a peripheral
 734  * (and not a host or OTG port).
 735  */
 736 &usb_host0_xhci {
 737         dr_mode = "peripheral";
 738         phys = <&usb2phy0_otg>;
 739         phy-names = "usb2-phy";
 740         status = "okay";
 741 };
 742
 743 &usb_host1_ehci {
 744         status = "okay";
 745 };
 746
 747 &usb_host1_ohci {
 748         status = "okay";
 749 };
 750
 751 &usb_host1_xhci {
 752         phy-names = "usb2-phy", "usb3-phy";
 753         phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>;
 754         status = "okay";
 755 };
 756
 757 &usb2phy0 {
 758         status = "okay";
 759 };
 760
 761 &usb2phy0_otg {
 762         status = "okay";
 763 };
 764
 765 &usb2phy1 {
 766         status = "okay";
 767 };
 768
 769 &usb2phy1_host {
 770         status = "okay";
 771 };
 772
 773 &vop {
 774         assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
 775         assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
 776         status = "okay";
 777 };
 778
 779 &vop_mmu {
 780         status = "okay";
 781 };
 782
 783 &vp0 {
 784         vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
 785                 reg = <ROCKCHIP_VOP2_EP_HDMI0>;
 786                 remote-endpoint = <&hdmi_in_vp0>;
 787         };
 788 };