src/arm64/rockchip/rk3566-radxa-cm3-io.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2022 Radxa Limited
   4  * Copyright (c) 2022 Amarula Solutions(India)
   5  */
   6
   7 /dts-v1/;
   8 #include <dt-bindings/soc/rockchip,vop2.h>
   9 #include "rk3566.dtsi"
  10 #include "rk3566-radxa-cm3.dtsi"
  11
  12 / {
  13         model = "Radxa Compute Module 3(CM3) IO Board";
  14         compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
  15
  16         aliases {
  17                 mmc1 = &sdmmc0;
  18         };
  19
  20         chosen: chosen {
  21                 stdout-path = "serial2:1500000n8";
  22         };
  23
  24         gmac1_clkin: external-gmac1-clock {
  25                 compatible = "fixed-clock";
  26                 clock-frequency = <125000000>;
  27                 clock-output-names = "gmac1_clkin";
  28                 #clock-cells = <0>;
  29         };
  30
  31         hdmi-con {
  32                 compatible = "hdmi-connector";
  33                 type = "a";
  34
  35                 port {
  36                         hdmi_con_in: endpoint {
  37                                 remote-endpoint = <&hdmi_out_con>;
  38                         };
  39                 };
  40         };
  41
  42         leds {
  43                 compatible = "gpio-leds";
  44
  45                 led-1 {
  46                         gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
  47                         color = <LED_COLOR_ID_GREEN>;
  48                         function = LED_FUNCTION_ACTIVITY;
  49                         linux,default-trigger = "heartbeat";
  50                         pinctrl-names = "default";
  51                         pinctrl-0 = <&pi_nled_activity>;
  52                 };
  53         };
  54
  55         vcc5v0_usb30: vcc5v0-usb30-regulator {
  56                 compatible = "regulator-fixed";
  57                 regulator-name = "vcc5v0_usb30";
  58                 enable-active-high;
  59                 gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
  60                 pinctrl-names = "default";
  61                 pinctrl-0 = <&vcc5v0_usb30_en_h>;
  62                 regulator-always-on;
  63                 regulator-min-microvolt = <5000000>;
  64                 regulator-max-microvolt = <5000000>;
  65                 vin-supply = <&vcc_sys>;
  66         };
  67
  68         vcca1v8_image: vcca1v8-image-regulator {
  69                 compatible = "regulator-fixed";
  70                 regulator-name = "vcca1v8_image";
  71                 regulator-always-on;
  72                 regulator-boot-on;
  73                 regulator-min-microvolt = <1800000>;
  74                 regulator-max-microvolt = <1800000>;
  75                 vin-supply = <&vcc_1v8_p>;
  76         };
  77
  78         vdda0v9_image: vdda0v9-image-regulator {
  79                 compatible = "regulator-fixed";
  80                 regulator-name = "vcca0v9_image";
  81                 regulator-always-on;
  82                 regulator-boot-on;
  83                 regulator-min-microvolt = <900000>;
  84                 regulator-max-microvolt = <900000>;
  85                 vin-supply = <&vdda_0v9>;
  86         };
  87 };
  88
  89 &combphy1 {
  90         status = "okay";
  91 };
  92
  93 &gmac1 {
  94         assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
  95         assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
  96         assigned-clock-rates = <0>, <125000000>;
  97         clock_in_out = "input";
  98         phy-handle = <&rgmii_phy1>;
  99         phy-mode = "rgmii";
 100         pinctrl-names = "default";
 101         pinctrl-0 = <&gmac1m0_miim
 102                      &gmac1m0_tx_bus2
 103                      &gmac1m0_rx_bus2
 104                      &gmac1m0_rgmii_clk
 105                      &gmac1m0_rgmii_bus
 106                      &gmac1m0_clkinout>;
 107         snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
 108         snps,reset-active-low;
 109         /* Reset time is 20ms, 100ms for rtl8211f */
 110         snps,reset-delays-us = <0 20000 100000>;
 111         tx_delay = <0x46>;
 112         rx_delay = <0x2e>;
 113         status = "okay";
 114 };
 115
 116 &hdmi {
 117         avdd-0v9-supply = <&vdda0v9_image>;
 118         avdd-1v8-supply = <&vcca1v8_image>;
 119         status = "okay";
 120 };
 121
 122 &hdmi_in {
 123         hdmi_in_vp0: endpoint {
 124                 remote-endpoint = <&vp0_out_hdmi>;
 125         };
 126 };
 127
 128 &hdmi_out {
 129         hdmi_out_con: endpoint {
 130                 remote-endpoint = <&hdmi_con_in>;
 131         };
 132 };
 133
 134 &hdmi_sound {
 135         status = "okay";
 136 };
 137
 138 &mdio1 {
 139         rgmii_phy1: ethernet-phy@0 {
 140                 compatible = "ethernet-phy-ieee802.3-c22";
 141                 reg = <0x0>;
 142         };
 143 };
 144
 145 &pinctrl {
 146         gmac1 {
 147                 gmac1m0_miim: gmac1m0-miim {
 148                         rockchip,pins =
 149                                 /* gmac1_mdcm0 */
 150                                 <3 RK_PC4 3 &pcfg_pull_none_drv_level_15>,
 151                                 /* gmac1_mdiom0 */
 152                                 <3 RK_PC5 3 &pcfg_pull_none_drv_level_15>;
 153                 };
 154
 155                 gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
 156                         rockchip,pins =
 157                                 /* gmac1_rxd0m0 */
 158                                 <3 RK_PB1 3 &pcfg_pull_none_drv_level_15>,
 159                                 /* gmac1_rxd1m0 */
 160                                 <3 RK_PB2 3 &pcfg_pull_none_drv_level_15>,
 161                                 /* gmac1_rxdvcrsm0 */
 162                                 <3 RK_PB3 3 &pcfg_pull_none_drv_level_15>;
 163                 };
 164
 165                 gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
 166                         rockchip,pins =
 167                                 /* gmac1_txd0m0 */
 168                                 <3 RK_PB5 3 &pcfg_pull_none_drv_level_15>,
 169                                 /* gmac1_txd1m0 */
 170                                 <3 RK_PB6 3 &pcfg_pull_none_drv_level_15>,
 171                                 /* gmac1_txenm0 */
 172                                 <3 RK_PB7 3 &pcfg_pull_none_drv_level_15>;
 173                 };
 174
 175                 gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
 176                         rockchip,pins =
 177                                 /* gmac1_rxclkm0 */
 178                                 <3 RK_PA7 3 &pcfg_pull_none_drv_level_15>,
 179                                 /* gmac1_txclkm0 */
 180                                 <3 RK_PA6 3 &pcfg_pull_none_drv_level_15>;
 181                 };
 182
 183                 gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
 184                         rockchip,pins =
 185                                 /* gmac1_rxd2m0 */
 186                                 <3 RK_PA4 3 &pcfg_pull_none_drv_level_15>,
 187                                 /* gmac1_rxd3m0 */
 188                                 <3 RK_PA5 3 &pcfg_pull_none_drv_level_15>,
 189                                 /* gmac1_txd2m0 */
 190                                 <3 RK_PA2 3 &pcfg_pull_none_drv_level_15>,
 191                                 /* gmac1_txd3m0 */
 192                                 <3 RK_PA3 3 &pcfg_pull_none_drv_level_15>;
 193                 };
 194
 195                 gmac1m0_clkinout: gmac1m0-clkinout {
 196                         rockchip,pins =
 197                                 /* gmac1_mclkinoutm0 */
 198                                 <3 RK_PC0 3 &pcfg_pull_none_drv_level_15>;
 199                 };
 200         };
 201
 202         leds {
 203                 pi_nled_activity: pi-nled-activity {
 204                         rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 205                 };
 206         };
 207
 208         sdcard {
 209                 sdmmc_pwren: sdmmc-pwren {
 210                         rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 211                 };
 212         };
 213
 214         usb {
 215                 vcc5v0_usb30_en_h: vcc5v0-host-en-h {
 216                         rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
 217                 };
 218         };
 219 };
 220
 221 &sdmmc0 {
 222         bus-width = <4>;
 223         cap-mmc-highspeed;
 224         cap-sd-highspeed;
 225         disable-wp;
 226         vqmmc-supply = <&vccio_sd>;
 227         pinctrl-names = "default";
 228         pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>;
 229         status = "okay";
 230 };
 231
 232 &uart2 {
 233         status = "okay";
 234 };
 235
 236 &usb2phy0_host {
 237         phy-supply = <&vcc5v0_usb30>;
 238         status = "okay";
 239 };
 240
 241 &usb2phy1_host {
 242         status = "okay";
 243 };
 244
 245 &usb2phy1_otg {
 246         status = "okay";
 247 };
 248
 249 &usb_host0_ehci {
 250         status = "okay";
 251 };
 252
 253 &usb_host1_xhci {
 254         status = "okay";
 255 };
 256
 257 &usb2phy0_otg {
 258         status = "okay";
 259 };
 260
 261 &usb_host0_xhci {
 262         status = "okay";
 263 };
 264
 265 &vop {
 266         assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
 267         assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
 268         status = "okay";
 269 };
 270
 271 &vop_mmu {
 272         status = "okay";
 273 };
 274
 275 &vp0 {
 276         vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
 277                 reg = <ROCKCHIP_VOP2_EP_HDMI0>;
 278                 remote-endpoint = <&hdmi_in_vp0>;
 279         };
 280 };