src/arm64/rockchip/rk3568-fastrhino-r68s.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "rk3568-fastrhino-r66s.dtsi"
   4
   5 / {
   6         model = "Lunzn FastRhino R68S";
   7         compatible = "lunzn,fastrhino-r68s", "rockchip,rk3568";
   8
   9         aliases {
  10                 ethernet0 = &gmac0;
  11                 ethernet1 = &gmac1;
  12                 mmc0 = &sdhci;
  13         };
  14
  15         adc-keys {
  16                 compatible = "adc-keys";
  17                 io-channels = <&saradc 0>;
  18                 io-channel-names = "buttons";
  19                 keyup-threshold-microvolt = <1800000>;
  20
  21                 button-recovery {
  22                         label = "Recovery";
  23                         linux,code = <KEY_VENDOR>;
  24                         press-threshold-microvolt = <1750>;
  25                 };
  26         };
  27 };
  28
  29 &gmac0 {
  30         assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
  31         assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
  32         assigned-clock-rates = <0>, <125000000>;
  33         clock_in_out = "output";
  34         phy-handle = <&rgmii_phy0>;
  35         phy-mode = "rgmii-id";
  36         pinctrl-names = "default";
  37         pinctrl-0 = <&gmac0_miim
  38                      &gmac0_tx_bus2
  39                      &gmac0_rx_bus2
  40                      &gmac0_rgmii_clk
  41                      &gmac0_rgmii_bus>;
  42         snps,reset-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
  43         snps,reset-active-low;
  44         /* Reset time is 15ms, 50ms for rtl8211f */
  45         snps,reset-delays-us = <0 15000 50000>;
  46         tx_delay = <0x3c>;
  47         rx_delay = <0x2f>;
  48         status = "okay";
  49 };
  50
  51 &gmac1 {
  52         assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
  53         assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
  54         assigned-clock-rates = <0>, <125000000>;
  55         clock_in_out = "output";
  56         phy-handle = <&rgmii_phy1>;
  57         phy-mode = "rgmii-id";
  58         pinctrl-names = "default";
  59         pinctrl-0 = <&gmac1m1_miim
  60                      &gmac1m1_tx_bus2
  61                      &gmac1m1_rx_bus2
  62                      &gmac1m1_rgmii_clk
  63                      &gmac1m1_rgmii_bus>;
  64         snps,reset-gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
  65         snps,reset-active-low;
  66         /* Reset time is 15ms, 50ms for rtl8211f */
  67         snps,reset-delays-us = <0 15000 50000>;
  68         tx_delay = <0x4f>;
  69         rx_delay = <0x26>;
  70         status = "okay";
  71 };
  72
  73 &mdio0 {
  74         rgmii_phy0: ethernet-phy@0 {
  75                 compatible = "ethernet-phy-ieee802.3-c22";
  76                 reg = <0>;
  77                 pinctrl-0 = <&eth_phy0_reset_pin>;
  78                 pinctrl-names = "default";
  79         };
  80 };
  81
  82 &mdio1 {
  83         rgmii_phy1: ethernet-phy@0 {
  84                 compatible = "ethernet-phy-ieee802.3-c22";
  85                 reg = <0>;
  86                 pinctrl-0 = <&eth_phy1_reset_pin>;
  87                 pinctrl-names = "default";
  88         };
  89 };
  90
  91 &pinctrl {
  92         gmac0 {
  93                 eth_phy0_reset_pin: eth-phy0-reset-pin {
  94                         rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
  95                 };
  96         };
  97
  98         gmac1 {
  99                 eth_phy1_reset_pin: eth-phy1-reset-pin {
 100                         rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
 101                 };
 102         };
 103 };
 104
 105 &sdhci {
 106         bus-width = <8>;
 107         max-frequency = <200000000>;
 108         non-removable;
 109         pinctrl-names = "default";
 110         pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
 111         status = "okay";
 112 };