src/arm64/ti/k3-j7200-evm-quad-port-eth-exp.dtso

   1 // SPDX-License-Identifier: GPL-2.0
   2 /**
   3  * DT Overlay for CPSW5G in QSGMII mode using J7 Quad Port ETH EXP Add-On Ethernet Card with
   4  * J7200 board.
   5  *
   6  * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
   7  */
   8
   9 /dts-v1/;
  10 /plugin/;
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13
  14 #include "k3-pinctrl.h"
  15 #include "k3-serdes.h"
  16
  17 &{/} {
  18         aliases {
  19                 ethernet1 = "/bus@100000/ethernet@c000000/ethernet-ports/port@1";
  20                 ethernet2 = "/bus@100000/ethernet@c000000/ethernet-ports/port@2";
  21                 ethernet3 = "/bus@100000/ethernet@c000000/ethernet-ports/port@3";
  22                 ethernet4 = "/bus@100000/ethernet@c000000/ethernet-ports/port@4";
  23         };
  24 };
  25
  26 &cpsw0 {
  27         status = "okay";
  28 };
  29
  30 &cpsw0_port1 {
  31         status = "okay";
  32         phy-handle = <&cpsw5g_phy0>;
  33         phy-mode = "qsgmii";
  34         mac-address = [00 00 00 00 00 00];
  35         phys = <&cpsw0_phy_gmii_sel 1>;
  36 };
  37
  38 &cpsw0_port2 {
  39         status = "okay";
  40         phy-handle = <&cpsw5g_phy1>;
  41         phy-mode = "qsgmii";
  42         mac-address = [00 00 00 00 00 00];
  43         phys = <&cpsw0_phy_gmii_sel 2>;
  44 };
  45
  46 &cpsw0_port3 {
  47         status = "okay";
  48         phy-handle = <&cpsw5g_phy2>;
  49         phy-mode = "qsgmii";
  50         mac-address = [00 00 00 00 00 00];
  51         phys = <&cpsw0_phy_gmii_sel 3>;
  52 };
  53
  54 &cpsw0_port4 {
  55         status = "okay";
  56         phy-handle = <&cpsw5g_phy3>;
  57         phy-mode = "qsgmii";
  58         mac-address = [00 00 00 00 00 00];
  59         phys = <&cpsw0_phy_gmii_sel 4>;
  60 };
  61
  62 &cpsw5g_mdio {
  63         status = "okay";
  64         pinctrl-names = "default";
  65         pinctrl-0 = <&mdio0_pins_default>;
  66         reset-gpios = <&exp2 17 GPIO_ACTIVE_LOW>;
  67         reset-post-delay-us = <120000>;
  68         #address-cells = <1>;
  69         #size-cells = <0>;
  70
  71         cpsw5g_phy0: ethernet-phy@16 {
  72                 reg = <16>;
  73         };
  74         cpsw5g_phy1: ethernet-phy@17 {
  75                 reg = <17>;
  76         };
  77         cpsw5g_phy2: ethernet-phy@18 {
  78                 reg = <18>;
  79         };
  80         cpsw5g_phy3: ethernet-phy@19 {
  81                 reg = <19>;
  82         };
  83 };
  84
  85 &exp2 {
  86         qsgmii-line-hog {
  87                 gpio-hog;
  88                 gpios = <16 GPIO_ACTIVE_HIGH>;
  89                 output-low;
  90                 line-name = "qsgmii-pwrdn-line";
  91         };
  92 };
  93
  94 &main_pmx0 {
  95         mdio0_pins_default: mdio0-default-pins {
  96                 pinctrl-single,pins = <
  97                         J721E_IOPAD(0x00a8, PIN_OUTPUT, 5) /* (W19) UART8_TXD.MDIO0_MDC */
  98                         J721E_IOPAD(0x00a4, PIN_INPUT, 5) /* (W14) UART8_RXD.MDIO0_MDIO */
  99                 >;
 100         };
 101 };