]> git.ipfire.org Git - thirdparty/hostap.git/blob - src/common/wpa_ctrl.h
DPP: Network Introduction protocol for wpa_supplicant
[thirdparty/hostap.git] / src / common / wpa_ctrl.h
1 /*
2 * wpa_supplicant/hostapd control interface library
3 * Copyright (c) 2004-2017, Jouni Malinen <j@w1.fi>
4 *
5 * This software may be distributed under the terms of the BSD license.
6 * See README for more details.
7 */
8
9 #ifndef WPA_CTRL_H
10 #define WPA_CTRL_H
11
12 #ifdef __cplusplus
13 extern "C" {
14 #endif
15
16 /* wpa_supplicant control interface - fixed message prefixes */
17
18 /** Interactive request for identity/password/pin */
19 #define WPA_CTRL_REQ "CTRL-REQ-"
20
21 /** Response to identity/password/pin request */
22 #define WPA_CTRL_RSP "CTRL-RSP-"
23
24 /* Event messages with fixed prefix */
25 /** Authentication completed successfully and data connection enabled */
26 #define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "
27 /** Disconnected, data connection is not available */
28 #define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED "
29 /** Association rejected during connection attempt */
30 #define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT "
31 /** Authentication rejected during connection attempt */
32 #define WPA_EVENT_AUTH_REJECT "CTRL-EVENT-AUTH-REJECT "
33 /** wpa_supplicant is exiting */
34 #define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
35 /** Password change was completed successfully */
36 #define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED "
37 /** EAP-Request/Notification received */
38 #define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION "
39 /** EAP authentication started (EAP-Request/Identity received) */
40 #define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED "
41 /** EAP method proposed by the server */
42 #define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD "
43 /** EAP method selected */
44 #define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD "
45 /** EAP peer certificate from TLS */
46 #define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT "
47 /** EAP peer certificate alternative subject name component from TLS */
48 #define WPA_EVENT_EAP_PEER_ALT "CTRL-EVENT-EAP-PEER-ALT "
49 /** EAP TLS certificate chain validation error */
50 #define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR "
51 /** EAP status */
52 #define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS "
53 /** EAP authentication completed successfully */
54 #define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS "
55 /** EAP authentication failed (EAP-Failure received) */
56 #define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE "
57 /** Network block temporarily disabled (e.g., due to authentication failure) */
58 #define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED "
59 /** Temporarily disabled network block re-enabled */
60 #define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED "
61 /** New scan started */
62 #define WPA_EVENT_SCAN_STARTED "CTRL-EVENT-SCAN-STARTED "
63 /** New scan results available */
64 #define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS "
65 /** Scan command failed */
66 #define WPA_EVENT_SCAN_FAILED "CTRL-EVENT-SCAN-FAILED "
67 /** wpa_supplicant state change */
68 #define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE "
69 /** A new BSS entry was added (followed by BSS entry id and BSSID) */
70 #define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED "
71 /** A BSS entry was removed (followed by BSS entry id and BSSID) */
72 #define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED "
73 /** No suitable network was found */
74 #define WPA_EVENT_NETWORK_NOT_FOUND "CTRL-EVENT-NETWORK-NOT-FOUND "
75 /** Change in the signal level was reported by the driver */
76 #define WPA_EVENT_SIGNAL_CHANGE "CTRL-EVENT-SIGNAL-CHANGE "
77 /** Beacon loss reported by the driver */
78 #define WPA_EVENT_BEACON_LOSS "CTRL-EVENT-BEACON-LOSS "
79 /** Regulatory domain channel */
80 #define WPA_EVENT_REGDOM_CHANGE "CTRL-EVENT-REGDOM-CHANGE "
81 /** Channel switch (followed by freq=<MHz> and other channel parameters) */
82 #define WPA_EVENT_CHANNEL_SWITCH "CTRL-EVENT-CHANNEL-SWITCH "
83
84 /** IP subnet status change notification
85 *
86 * When using an offloaded roaming mechanism where driver/firmware takes care
87 * of roaming and IP subnet validation checks post-roaming, this event can
88 * indicate whether IP subnet has changed.
89 *
90 * The event has a status=<0/1/2> parameter where
91 * 0 = unknown
92 * 1 = IP subnet unchanged (can continue to use the old IP address)
93 * 2 = IP subnet changed (need to get a new IP address)
94 */
95 #define WPA_EVENT_SUBNET_STATUS_UPDATE "CTRL-EVENT-SUBNET-STATUS-UPDATE "
96
97 /** RSN IBSS 4-way handshakes completed with specified peer */
98 #define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED "
99
100 /** Notification of frequency conflict due to a concurrent operation.
101 *
102 * The indicated network is disabled and needs to be re-enabled before it can
103 * be used again.
104 */
105 #define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT "
106 /** Frequency ranges that the driver recommends to avoid */
107 #define WPA_EVENT_AVOID_FREQ "CTRL-EVENT-AVOID-FREQ "
108 /** WPS overlap detected in PBC mode */
109 #define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED "
110 /** Available WPS AP with active PBC found in scan results */
111 #define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC "
112 /** Available WPS AP with our address as authorized in scan results */
113 #define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH "
114 /** Available WPS AP with recently selected PIN registrar found in scan results
115 */
116 #define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN "
117 /** Available WPS AP found in scan results */
118 #define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE "
119 /** A new credential received */
120 #define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED "
121 /** M2D received */
122 #define WPS_EVENT_M2D "WPS-M2D "
123 /** WPS registration failed after M2/M2D */
124 #define WPS_EVENT_FAIL "WPS-FAIL "
125 /** WPS registration completed successfully */
126 #define WPS_EVENT_SUCCESS "WPS-SUCCESS "
127 /** WPS enrollment attempt timed out and was terminated */
128 #define WPS_EVENT_TIMEOUT "WPS-TIMEOUT "
129 /* PBC mode was activated */
130 #define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE "
131 /* PBC mode was disabled */
132 #define WPS_EVENT_DISABLE "WPS-PBC-DISABLE "
133
134 #define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN "
135
136 #define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK "
137
138 /* WPS ER events */
139 #define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD "
140 #define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE "
141 #define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD "
142 #define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE "
143 #define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS "
144 #define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG "
145
146 /* DPP events */
147 #define DPP_EVENT_AUTH_SUCCESS "DPP-AUTH-SUCCESS "
148 #define DPP_EVENT_NOT_COMPATIBLE "DPP-NOT-COMPATIBLE "
149 #define DPP_EVENT_RESPONSE_PENDING "DPP-RESPONSE-PENDING "
150 #define DPP_EVENT_SCAN_PEER_QR_CODE "DPP-SCAN-PEER-QR-CODE "
151 #define DPP_EVENT_CONF_RECEIVED "DPP-CONF-RECEIVED "
152 #define DPP_EVENT_CONF_SENT "DPP-CONF-SENT "
153 #define DPP_EVENT_CONF_FAILED "DPP-CONF-FAILED "
154 #define DPP_EVENT_CONFOBJ_SSID "DPP-CONFOBJ-SSID "
155 #define DPP_EVENT_CONNECTOR "DPP-CONNECTOR "
156 #define DPP_EVENT_C_SIGN_KEY "DPP-C-SIGN-KEY "
157 #define DPP_EVENT_NET_ACCESS_KEY "DPP-NET-ACCESS-KEY "
158 #define DPP_EVENT_MISSING_CONNECTOR "DPP-MISSING-CONNECTOR "
159
160 /* MESH events */
161 #define MESH_GROUP_STARTED "MESH-GROUP-STARTED "
162 #define MESH_GROUP_REMOVED "MESH-GROUP-REMOVED "
163 #define MESH_PEER_CONNECTED "MESH-PEER-CONNECTED "
164 #define MESH_PEER_DISCONNECTED "MESH-PEER-DISCONNECTED "
165 /** Mesh SAE authentication failure. Wrong password suspected. */
166 #define MESH_SAE_AUTH_FAILURE "MESH-SAE-AUTH-FAILURE "
167 #define MESH_SAE_AUTH_BLOCKED "MESH-SAE-AUTH-BLOCKED "
168
169 /* WMM AC events */
170 #define WMM_AC_EVENT_TSPEC_ADDED "TSPEC-ADDED "
171 #define WMM_AC_EVENT_TSPEC_REMOVED "TSPEC-REMOVED "
172 #define WMM_AC_EVENT_TSPEC_REQ_FAILED "TSPEC-REQ-FAILED "
173
174 /** P2P device found */
175 #define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND "
176
177 /** P2P device lost */
178 #define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST "
179
180 /** A P2P device requested GO negotiation, but we were not ready to start the
181 * negotiation */
182 #define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST "
183 #define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS "
184 #define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE "
185 #define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS "
186 #define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE "
187 #define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED "
188 #define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED "
189 #define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE "
190 #define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE "
191 /* parameters: <peer address> <PIN> */
192 #define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN "
193 /* parameters: <peer address> */
194 #define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN "
195 /* parameters: <peer address> */
196 #define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ "
197 /* parameters: <peer address> */
198 #define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP "
199 /* parameters: <peer address> <status> */
200 #define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE"
201 /* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */
202 #define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ "
203 /* parameters: <src addr> <update indicator> <TLVs> */
204 #define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP "
205 #define P2P_EVENT_SERV_ASP_RESP "P2P-SERV-ASP-RESP "
206 #define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED "
207 #define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT "
208 #define P2P_EVENT_INVITATION_ACCEPTED "P2P-INVITATION-ACCEPTED "
209 #define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED "
210 #define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id="
211 #define P2P_EVENT_PRESENCE_RESPONSE "P2P-PRESENCE-RESPONSE "
212 #define P2P_EVENT_NFC_BOTH_GO "P2P-NFC-BOTH-GO "
213 #define P2P_EVENT_NFC_PEER_CLIENT "P2P-NFC-PEER-CLIENT "
214 #define P2P_EVENT_NFC_WHILE_CLIENT "P2P-NFC-WHILE-CLIENT "
215 #define P2P_EVENT_FALLBACK_TO_GO_NEG "P2P-FALLBACK-TO-GO-NEG "
216 #define P2P_EVENT_FALLBACK_TO_GO_NEG_ENABLED "P2P-FALLBACK-TO-GO-NEG-ENABLED "
217
218 /* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */
219 #define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT "
220 #define P2P_EVENT_REMOVE_AND_REFORM_GROUP "P2P-REMOVE-AND-REFORM-GROUP "
221
222 #define P2P_EVENT_P2PS_PROVISION_START "P2PS-PROV-START "
223 #define P2P_EVENT_P2PS_PROVISION_DONE "P2PS-PROV-DONE "
224
225 #define INTERWORKING_AP "INTERWORKING-AP "
226 #define INTERWORKING_BLACKLISTED "INTERWORKING-BLACKLISTED "
227 #define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH "
228 #define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED "
229 #define INTERWORKING_SELECTED "INTERWORKING-SELECTED "
230
231 /* Credential block added; parameters: <id> */
232 #define CRED_ADDED "CRED-ADDED "
233 /* Credential block modified; parameters: <id> <field> */
234 #define CRED_MODIFIED "CRED-MODIFIED "
235 /* Credential block removed; parameters: <id> */
236 #define CRED_REMOVED "CRED-REMOVED "
237
238 #define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO "
239 /* parameters: <addr> <dialog_token> <freq> */
240 #define GAS_QUERY_START "GAS-QUERY-START "
241 /* parameters: <addr> <dialog_token> <freq> <status_code> <result> */
242 #define GAS_QUERY_DONE "GAS-QUERY-DONE "
243
244 /* parameters: <addr> <result> */
245 #define ANQP_QUERY_DONE "ANQP-QUERY-DONE "
246
247 #define RX_ANQP "RX-ANQP "
248 #define RX_HS20_ANQP "RX-HS20-ANQP "
249 #define RX_HS20_ANQP_ICON "RX-HS20-ANQP-ICON "
250 #define RX_HS20_ICON "RX-HS20-ICON "
251 #define RX_MBO_ANQP "RX-MBO-ANQP "
252
253 #define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION "
254 #define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE "
255
256 #define EXT_RADIO_WORK_START "EXT-RADIO-WORK-START "
257 #define EXT_RADIO_WORK_TIMEOUT "EXT-RADIO-WORK-TIMEOUT "
258
259 #define RRM_EVENT_NEIGHBOR_REP_RXED "RRM-NEIGHBOR-REP-RECEIVED "
260 #define RRM_EVENT_NEIGHBOR_REP_FAILED "RRM-NEIGHBOR-REP-REQUEST-FAILED "
261
262 /* hostapd control interface - fixed message prefixes */
263 #define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED "
264 #define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS "
265 #define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS "
266 #define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED "
267 #define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED "
268 #define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED "
269 #define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED "
270 #define AP_STA_CONNECTED "AP-STA-CONNECTED "
271 #define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED "
272 #define AP_STA_POSSIBLE_PSK_MISMATCH "AP-STA-POSSIBLE-PSK-MISMATCH "
273 #define AP_STA_POLL_OK "AP-STA-POLL-OK "
274
275 #define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA "
276 #define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA "
277
278 #define AP_EVENT_ENABLED "AP-ENABLED "
279 #define AP_EVENT_DISABLED "AP-DISABLED "
280
281 #define INTERFACE_ENABLED "INTERFACE-ENABLED "
282 #define INTERFACE_DISABLED "INTERFACE-DISABLED "
283
284 #define ACS_EVENT_STARTED "ACS-STARTED "
285 #define ACS_EVENT_COMPLETED "ACS-COMPLETED "
286 #define ACS_EVENT_FAILED "ACS-FAILED "
287
288 #define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED "
289 #define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL "
290 #define DFS_EVENT_CAC_START "DFS-CAC-START "
291 #define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED "
292 #define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED "
293 #define DFS_EVENT_PRE_CAC_EXPIRED "DFS-PRE-CAC-EXPIRED "
294
295 #define AP_CSA_FINISHED "AP-CSA-FINISHED "
296
297 #define P2P_EVENT_LISTEN_OFFLOAD_STOP "P2P-LISTEN-OFFLOAD-STOPPED "
298 #define P2P_LISTEN_OFFLOAD_STOP_REASON "P2P-LISTEN-OFFLOAD-STOP-REASON "
299
300 /* BSS Transition Management Response frame received */
301 #define BSS_TM_RESP "BSS-TM-RESP "
302
303 /* MBO IE with cellular data connection preference received */
304 #define MBO_CELL_PREFERENCE "MBO-CELL-PREFERENCE "
305
306 /* BSS Transition Management Request received with MBO transition reason */
307 #define MBO_TRANSITION_REASON "MBO-TRANSITION-REASON "
308
309 /* parameters: <STA address> <dialog token> <ack=0/1> */
310 #define BEACON_REQ_TX_STATUS "BEACON-REQ-TX-STATUS "
311 /* parameters: <STA address> <dialog token> <report mode> <beacon report> */
312 #define BEACON_RESP_RX "BEACON-RESP-RX "
313
314 /* PMKSA cache entry added; parameters: <BSSID> <network_id> */
315 #define PMKSA_CACHE_ADDED "PMKSA-CACHE-ADDED "
316 /* PMKSA cache entry removed; parameters: <BSSID> <network_id> */
317 #define PMKSA_CACHE_REMOVED "PMKSA-CACHE-REMOVED "
318
319 /* FILS HLP Container receive; parameters: dst=<addr> src=<addr> frame=<hexdump>
320 */
321 #define FILS_HLP_RX "FILS-HLP-RX "
322
323 /* BSS command information masks */
324
325 #define WPA_BSS_MASK_ALL 0xFFFDFFFF
326 #define WPA_BSS_MASK_ID BIT(0)
327 #define WPA_BSS_MASK_BSSID BIT(1)
328 #define WPA_BSS_MASK_FREQ BIT(2)
329 #define WPA_BSS_MASK_BEACON_INT BIT(3)
330 #define WPA_BSS_MASK_CAPABILITIES BIT(4)
331 #define WPA_BSS_MASK_QUAL BIT(5)
332 #define WPA_BSS_MASK_NOISE BIT(6)
333 #define WPA_BSS_MASK_LEVEL BIT(7)
334 #define WPA_BSS_MASK_TSF BIT(8)
335 #define WPA_BSS_MASK_AGE BIT(9)
336 #define WPA_BSS_MASK_IE BIT(10)
337 #define WPA_BSS_MASK_FLAGS BIT(11)
338 #define WPA_BSS_MASK_SSID BIT(12)
339 #define WPA_BSS_MASK_WPS_SCAN BIT(13)
340 #define WPA_BSS_MASK_P2P_SCAN BIT(14)
341 #define WPA_BSS_MASK_INTERNETW BIT(15)
342 #define WPA_BSS_MASK_WIFI_DISPLAY BIT(16)
343 #define WPA_BSS_MASK_DELIM BIT(17)
344 #define WPA_BSS_MASK_MESH_SCAN BIT(18)
345 #define WPA_BSS_MASK_SNR BIT(19)
346 #define WPA_BSS_MASK_EST_THROUGHPUT BIT(20)
347 #define WPA_BSS_MASK_FST BIT(21)
348 #define WPA_BSS_MASK_UPDATE_IDX BIT(22)
349 #define WPA_BSS_MASK_BEACON_IE BIT(23)
350 #define WPA_BSS_MASK_FILS_INDICATION BIT(24)
351
352
353 /* VENDOR_ELEM_* frame id values */
354 enum wpa_vendor_elem_frame {
355 VENDOR_ELEM_PROBE_REQ_P2P = 0,
356 VENDOR_ELEM_PROBE_RESP_P2P = 1,
357 VENDOR_ELEM_PROBE_RESP_P2P_GO = 2,
358 VENDOR_ELEM_BEACON_P2P_GO = 3,
359 VENDOR_ELEM_P2P_PD_REQ = 4,
360 VENDOR_ELEM_P2P_PD_RESP = 5,
361 VENDOR_ELEM_P2P_GO_NEG_REQ = 6,
362 VENDOR_ELEM_P2P_GO_NEG_RESP = 7,
363 VENDOR_ELEM_P2P_GO_NEG_CONF = 8,
364 VENDOR_ELEM_P2P_INV_REQ = 9,
365 VENDOR_ELEM_P2P_INV_RESP = 10,
366 VENDOR_ELEM_P2P_ASSOC_REQ = 11,
367 VENDOR_ELEM_P2P_ASSOC_RESP = 12,
368 VENDOR_ELEM_ASSOC_REQ = 13,
369 VENDOR_ELEM_PROBE_REQ = 14,
370 NUM_VENDOR_ELEM_FRAMES
371 };
372
373
374 /* wpa_supplicant/hostapd control interface access */
375
376 /**
377 * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
378 * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
379 * Returns: Pointer to abstract control interface data or %NULL on failure
380 *
381 * This function is used to open a control interface to wpa_supplicant/hostapd.
382 * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path
383 * is configured in wpa_supplicant/hostapd and other programs using the control
384 * interface need to use matching path configuration.
385 */
386 struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path);
387
388 /**
389 * wpa_ctrl_open2 - Open a control interface to wpa_supplicant/hostapd
390 * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
391 * @cli_path: Path for client UNIX domain sockets; ignored if UDP socket
392 * is used.
393 * Returns: Pointer to abstract control interface data or %NULL on failure
394 *
395 * This function is used to open a control interface to wpa_supplicant/hostapd
396 * when the socket path for client need to be specified explicitly. Default
397 * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd and client
398 * socket path is /tmp.
399 */
400 struct wpa_ctrl * wpa_ctrl_open2(const char *ctrl_path, const char *cli_path);
401
402
403 /**
404 * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd
405 * @ctrl: Control interface data from wpa_ctrl_open()
406 *
407 * This function is used to close a control interface.
408 */
409 void wpa_ctrl_close(struct wpa_ctrl *ctrl);
410
411
412 /**
413 * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd
414 * @ctrl: Control interface data from wpa_ctrl_open()
415 * @cmd: Command; usually, ASCII text, e.g., "PING"
416 * @cmd_len: Length of the cmd in bytes
417 * @reply: Buffer for the response
418 * @reply_len: Reply buffer length
419 * @msg_cb: Callback function for unsolicited messages or %NULL if not used
420 * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout
421 *
422 * This function is used to send commands to wpa_supplicant/hostapd. Received
423 * response will be written to reply and reply_len is set to the actual length
424 * of the reply. This function will block for up to two seconds while waiting
425 * for the reply. If unsolicited messages are received, the blocking time may
426 * be longer.
427 *
428 * msg_cb can be used to register a callback function that will be called for
429 * unsolicited messages received while waiting for the command response. These
430 * messages may be received if wpa_ctrl_request() is called at the same time as
431 * wpa_supplicant/hostapd is sending such a message. This can happen only if
432 * the program has used wpa_ctrl_attach() to register itself as a monitor for
433 * event messages. Alternatively to msg_cb, programs can register two control
434 * interface connections and use one of them for commands and the other one for
435 * receiving event messages, in other words, call wpa_ctrl_attach() only for
436 * the control interface connection that will be used for event messages.
437 */
438 int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
439 char *reply, size_t *reply_len,
440 void (*msg_cb)(char *msg, size_t len));
441
442
443 /**
444 * wpa_ctrl_attach - Register as an event monitor for the control interface
445 * @ctrl: Control interface data from wpa_ctrl_open()
446 * Returns: 0 on success, -1 on failure, -2 on timeout
447 *
448 * This function registers the control interface connection as a monitor for
449 * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the
450 * control interface connection starts receiving event messages that can be
451 * read with wpa_ctrl_recv().
452 */
453 int wpa_ctrl_attach(struct wpa_ctrl *ctrl);
454
455
456 /**
457 * wpa_ctrl_detach - Unregister event monitor from the control interface
458 * @ctrl: Control interface data from wpa_ctrl_open()
459 * Returns: 0 on success, -1 on failure, -2 on timeout
460 *
461 * This function unregisters the control interface connection as a monitor for
462 * wpa_supplicant/hostapd events, i.e., cancels the registration done with
463 * wpa_ctrl_attach().
464 */
465 int wpa_ctrl_detach(struct wpa_ctrl *ctrl);
466
467
468 /**
469 * wpa_ctrl_recv - Receive a pending control interface message
470 * @ctrl: Control interface data from wpa_ctrl_open()
471 * @reply: Buffer for the message data
472 * @reply_len: Length of the reply buffer
473 * Returns: 0 on success, -1 on failure
474 *
475 * This function will receive a pending control interface message. The received
476 * response will be written to reply and reply_len is set to the actual length
477 * of the reply.
478
479 * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach()
480 * must have been used to register the control interface as an event monitor.
481 */
482 int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len);
483
484
485 /**
486 * wpa_ctrl_pending - Check whether there are pending event messages
487 * @ctrl: Control interface data from wpa_ctrl_open()
488 * Returns: 1 if there are pending messages, 0 if no, or -1 on error
489 *
490 * This function will check whether there are any pending control interface
491 * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is
492 * only used for event messages, i.e., wpa_ctrl_attach() must have been used to
493 * register the control interface as an event monitor.
494 */
495 int wpa_ctrl_pending(struct wpa_ctrl *ctrl);
496
497
498 /**
499 * wpa_ctrl_get_fd - Get file descriptor used by the control interface
500 * @ctrl: Control interface data from wpa_ctrl_open()
501 * Returns: File descriptor used for the connection
502 *
503 * This function can be used to get the file descriptor that is used for the
504 * control interface connection. The returned value can be used, e.g., with
505 * select() while waiting for multiple events.
506 *
507 * The returned file descriptor must not be used directly for sending or
508 * receiving packets; instead, the library functions wpa_ctrl_request() and
509 * wpa_ctrl_recv() must be used for this.
510 */
511 int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl);
512
513 #ifdef ANDROID
514 /**
515 * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that
516 * may be left over from clients that were previously connected to
517 * wpa_supplicant. This keeps these files from being orphaned in the
518 * event of crashes that prevented them from being removed as part
519 * of the normal orderly shutdown.
520 */
521 void wpa_ctrl_cleanup(void);
522 #endif /* ANDROID */
523
524 #ifdef CONFIG_CTRL_IFACE_UDP
525 /* Port range for multiple wpa_supplicant instances and multiple VIFs */
526 #define WPA_CTRL_IFACE_PORT 9877
527 #define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */
528 #define WPA_GLOBAL_CTRL_IFACE_PORT 9878
529 #define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */
530
531 char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl);
532 #endif /* CONFIG_CTRL_IFACE_UDP */
533
534
535 #ifdef __cplusplus
536 }
537 #endif
538
539 #endif /* WPA_CTRL_H */