src/mips/pic32/pic32mzda.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2015 Microchip Technology Inc.  All rights reserved.
   4  */
   5 #include <dt-bindings/clock/microchip,pic32-clock.h>
   6 #include <dt-bindings/interrupt-controller/irq.h>
   7
   8 / {
   9         #address-cells = <1>;
  10         #size-cells = <1>;
  11         interrupt-parent = <&evic>;
  12
  13         aliases {
  14                 gpio0 = &gpio0;
  15                 gpio1 = &gpio1;
  16                 gpio2 = &gpio2;
  17                 gpio3 = &gpio3;
  18                 gpio4 = &gpio4;
  19                 gpio5 = &gpio5;
  20                 gpio6 = &gpio6;
  21                 gpio7 = &gpio7;
  22                 gpio8 = &gpio8;
  23                 gpio9 = &gpio9;
  24                 serial0 = &uart1;
  25                 serial1 = &uart2;
  26                 serial2 = &uart3;
  27                 serial3 = &uart4;
  28                 serial4 = &uart5;
  29                 serial5 = &uart6;
  30         };
  31
  32         cpus {
  33                 #address-cells = <1>;
  34                 #size-cells = <0>;
  35
  36                 cpu@0 {
  37                         compatible = "mti,mips14KEc";
  38                         device_type = "cpu";
  39                 };
  40         };
  41
  42         soc {
  43                 compatible = "microchip,pic32mzda-infra";
  44                 interrupts = <0 IRQ_TYPE_EDGE_RISING>;
  45         };
  46
  47         /* external clock input on TxCLKI pin */
  48         txcki: txcki_clk {
  49                 #clock-cells = <0>;
  50                 compatible = "fixed-clock";
  51                 clock-frequency = <4000000>;
  52                 status = "disabled";
  53         };
  54
  55         /* external input on REFCLKIx pin */
  56         refix: refix_clk {
  57                 #clock-cells = <0>;
  58                 compatible = "fixed-clock";
  59                 clock-frequency = <24000000>;
  60                 status = "disabled";
  61         };
  62
  63         rootclk: clock-controller@1f801200 {
  64                 compatible = "microchip,pic32mzda-clk";
  65                 reg = <0x1f801200 0x200>;
  66                 #clock-cells = <1>;
  67                 microchip,pic32mzda-sosc;
  68         };
  69
  70         evic: interrupt-controller@1f810000 {
  71                 compatible = "microchip,pic32mzda-evic";
  72                 interrupt-controller;
  73                 #interrupt-cells = <2>;
  74                 reg = <0x1f810000 0x1000>;
  75                 microchip,external-irqs = <3 8 13 18 23>;
  76         };
  77
  78         pic32_pinctrl: pinctrl@1f801400 {
  79                 #address-cells = <1>;
  80                 #size-cells = <1>;
  81                 compatible = "microchip,pic32mzda-pinctrl";
  82                 reg = <0x1f801400 0x400>;
  83                 clocks = <&rootclk PB1CLK>;
  84         };
  85
  86         /* PORTA */
  87         gpio0: gpio0@1f860000 {
  88                 compatible = "microchip,pic32mzda-gpio";
  89                 reg = <0x1f860000 0x100>;
  90                 interrupts = <118 IRQ_TYPE_LEVEL_HIGH>;
  91                 #gpio-cells = <2>;
  92                 gpio-controller;
  93                 interrupt-controller;
  94                 #interrupt-cells = <2>;
  95                 clocks = <&rootclk PB4CLK>;
  96                 microchip,gpio-bank = <0>;
  97                 gpio-ranges = <&pic32_pinctrl 0 0 16>;
  98         };
  99
 100         /* PORTB */
 101         gpio1: gpio1@1f860100 {
 102                 compatible = "microchip,pic32mzda-gpio";
 103                 reg = <0x1f860100 0x100>;
 104                 interrupts = <119 IRQ_TYPE_LEVEL_HIGH>;
 105                 #gpio-cells = <2>;
 106                 gpio-controller;
 107                 interrupt-controller;
 108                 #interrupt-cells = <2>;
 109                 clocks = <&rootclk PB4CLK>;
 110                 microchip,gpio-bank = <1>;
 111                 gpio-ranges = <&pic32_pinctrl 0 16 16>;
 112         };
 113
 114         /* PORTC */
 115         gpio2: gpio2@1f860200 {
 116                 compatible = "microchip,pic32mzda-gpio";
 117                 reg = <0x1f860200 0x100>;
 118                 interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
 119                 #gpio-cells = <2>;
 120                 gpio-controller;
 121                 interrupt-controller;
 122                 #interrupt-cells = <2>;
 123                 clocks = <&rootclk PB4CLK>;
 124                 microchip,gpio-bank = <2>;
 125                 gpio-ranges = <&pic32_pinctrl 0 32 16>;
 126         };
 127
 128         /* PORTD */
 129         gpio3: gpio3@1f860300 {
 130                 compatible = "microchip,pic32mzda-gpio";
 131                 reg = <0x1f860300 0x100>;
 132                 interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
 133                 #gpio-cells = <2>;
 134                 gpio-controller;
 135                 interrupt-controller;
 136                 #interrupt-cells = <2>;
 137                 clocks = <&rootclk PB4CLK>;
 138                 microchip,gpio-bank = <3>;
 139                 gpio-ranges = <&pic32_pinctrl 0 48 16>;
 140         };
 141
 142         /* PORTE */
 143         gpio4: gpio4@1f860400 {
 144                 compatible = "microchip,pic32mzda-gpio";
 145                 reg = <0x1f860400 0x100>;
 146                 interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
 147                 #gpio-cells = <2>;
 148                 gpio-controller;
 149                 interrupt-controller;
 150                 #interrupt-cells = <2>;
 151                 clocks = <&rootclk PB4CLK>;
 152                 microchip,gpio-bank = <4>;
 153                 gpio-ranges = <&pic32_pinctrl 0 64 16>;
 154         };
 155
 156         /* PORTF */
 157         gpio5: gpio5@1f860500 {
 158                 compatible = "microchip,pic32mzda-gpio";
 159                 reg = <0x1f860500 0x100>;
 160                 interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
 161                 #gpio-cells = <2>;
 162                 gpio-controller;
 163                 interrupt-controller;
 164                 #interrupt-cells = <2>;
 165                 clocks = <&rootclk PB4CLK>;
 166                 microchip,gpio-bank = <5>;
 167                 gpio-ranges = <&pic32_pinctrl 0 80 16>;
 168         };
 169
 170         /* PORTG */
 171         gpio6: gpio6@1f860600 {
 172                 compatible = "microchip,pic32mzda-gpio";
 173                 reg = <0x1f860600 0x100>;
 174                 interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
 175                 #gpio-cells = <2>;
 176                 gpio-controller;
 177                 interrupt-controller;
 178                 #interrupt-cells = <2>;
 179                 clocks = <&rootclk PB4CLK>;
 180                 microchip,gpio-bank = <6>;
 181                 gpio-ranges = <&pic32_pinctrl 0 96 16>;
 182         };
 183
 184         /* PORTH */
 185         gpio7: gpio7@1f860700 {
 186                 compatible = "microchip,pic32mzda-gpio";
 187                 reg = <0x1f860700 0x100>;
 188                 interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
 189                 #gpio-cells = <2>;
 190                 gpio-controller;
 191                 interrupt-controller;
 192                 #interrupt-cells = <2>;
 193                 clocks = <&rootclk PB4CLK>;
 194                 microchip,gpio-bank = <7>;
 195                 gpio-ranges = <&pic32_pinctrl 0 112 16>;
 196         };
 197
 198         /* PORTI does not exist */
 199
 200         /* PORTJ */
 201         gpio8: gpio8@1f860800 {
 202                 compatible = "microchip,pic32mzda-gpio";
 203                 reg = <0x1f860800 0x100>;
 204                 interrupts = <126 IRQ_TYPE_LEVEL_HIGH>;
 205                 #gpio-cells = <2>;
 206                 gpio-controller;
 207                 interrupt-controller;
 208                 #interrupt-cells = <2>;
 209                 clocks = <&rootclk PB4CLK>;
 210                 microchip,gpio-bank = <8>;
 211                 gpio-ranges = <&pic32_pinctrl 0 128 16>;
 212         };
 213
 214         /* PORTK */
 215         gpio9: gpio9@1f860900 {
 216                 compatible = "microchip,pic32mzda-gpio";
 217                 reg = <0x1f860900 0x100>;
 218                 interrupts = <127 IRQ_TYPE_LEVEL_HIGH>;
 219                 #gpio-cells = <2>;
 220                 gpio-controller;
 221                 interrupt-controller;
 222                 #interrupt-cells = <2>;
 223                 clocks = <&rootclk PB4CLK>;
 224                 microchip,gpio-bank = <9>;
 225                 gpio-ranges = <&pic32_pinctrl 0 144 16>;
 226         };
 227
 228         sdhci: sdhci@1f8ec000 {
 229                 compatible = "microchip,pic32mzda-sdhci";
 230                 reg = <0x1f8ec000 0x100>;
 231                 interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
 232                 clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>;
 233                 clock-names = "base_clk", "sys_clk";
 234                 bus-width = <4>;
 235                 cap-sd-highspeed;
 236                 status = "disabled";
 237         };
 238
 239         uart1: serial@1f822000 {
 240                 compatible = "microchip,pic32mzda-uart";
 241                 reg = <0x1f822000 0x50>;
 242                 interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
 243                         <113 IRQ_TYPE_LEVEL_HIGH>,
 244                         <114 IRQ_TYPE_LEVEL_HIGH>;
 245                 clocks = <&rootclk PB2CLK>;
 246                 status = "disabled";
 247         };
 248
 249         uart2: serial@1f822200 {
 250                 compatible = "microchip,pic32mzda-uart";
 251                 reg = <0x1f822200 0x50>;
 252                 interrupts = <145 IRQ_TYPE_LEVEL_HIGH>,
 253                         <146 IRQ_TYPE_LEVEL_HIGH>,
 254                         <147 IRQ_TYPE_LEVEL_HIGH>;
 255                 clocks = <&rootclk PB2CLK>;
 256                 status = "disabled";
 257         };
 258
 259         uart3: serial@1f822400 {
 260                 compatible = "microchip,pic32mzda-uart";
 261                 reg = <0x1f822400 0x50>;
 262                 interrupts = <157 IRQ_TYPE_LEVEL_HIGH>,
 263                         <158 IRQ_TYPE_LEVEL_HIGH>,
 264                         <159 IRQ_TYPE_LEVEL_HIGH>;
 265                 clocks = <&rootclk PB2CLK>;
 266                 status = "disabled";
 267         };
 268
 269         uart4: serial@1f822600 {
 270                 compatible = "microchip,pic32mzda-uart";
 271                 reg = <0x1f822600 0x50>;
 272                 interrupts = <170 IRQ_TYPE_LEVEL_HIGH>,
 273                         <171 IRQ_TYPE_LEVEL_HIGH>,
 274                         <172 IRQ_TYPE_LEVEL_HIGH>;
 275                 clocks = <&rootclk PB2CLK>;
 276                 status = "disabled";
 277         };
 278
 279         uart5: serial@1f822800 {
 280                 compatible = "microchip,pic32mzda-uart";
 281                 reg = <0x1f822800 0x50>;
 282                 interrupts = <179 IRQ_TYPE_LEVEL_HIGH>,
 283                         <180 IRQ_TYPE_LEVEL_HIGH>,
 284                         <181 IRQ_TYPE_LEVEL_HIGH>;
 285                 clocks = <&rootclk PB2CLK>;
 286                 status = "disabled";
 287         };
 288
 289         uart6: serial@1f822A00 {
 290                 compatible = "microchip,pic32mzda-uart";
 291                 reg = <0x1f822A00 0x50>;
 292                 interrupts = <188 IRQ_TYPE_LEVEL_HIGH>,
 293                         <189 IRQ_TYPE_LEVEL_HIGH>,
 294                         <190 IRQ_TYPE_LEVEL_HIGH>;
 295                 clocks = <&rootclk PB2CLK>;
 296                 status = "disabled";
 297         };
 298 };