src/powerpc/fsl/mpc8568mds.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * MPC8568E MDS Device Tree Source
   4  *
   5  * Copyright 2007, 2008 Freescale Semiconductor Inc.
   6  */
   7
   8 /include/ "mpc8568si-pre.dtsi"
   9
  10 / {
  11         model = "MPC8568EMDS";
  12         compatible = "MPC8568EMDS", "MPC85xxMDS";
  13
  14         aliases {
  15                 pci0 = &pci0;
  16                 pci1 = &pci1;
  17                 rapidio0 = &rio;
  18         };
  19
  20         memory {
  21                 device_type = "memory";
  22                 reg = <0x0 0x0 0x0 0x0>;
  23         };
  24
  25         lbc: localbus@e0005000 {
  26                 reg = <0x0 0xe0005000 0x0 0x1000>;
  27                 ranges = <0x0 0x0 0xfe000000 0x02000000
  28                           0x1 0x0 0xf8000000 0x00008000
  29                           0x2 0x0 0xf0000000 0x04000000
  30                           0x4 0x0 0xf8008000 0x00008000
  31                           0x5 0x0 0xf8010000 0x00008000>;
  32
  33                 nor@0,0 {
  34                         #address-cells = <1>;
  35                         #size-cells = <1>;
  36                         compatible = "cfi-flash";
  37                         reg = <0x0 0x0 0x02000000>;
  38                         bank-width = <2>;
  39                         device-width = <2>;
  40                 };
  41
  42                 bcsr@1,0 {
  43                         #address-cells = <1>;
  44                         #size-cells = <1>;
  45                         compatible = "fsl,mpc8568mds-bcsr";
  46                         reg = <1 0 0x8000>;
  47                         ranges = <0 1 0 0x8000>;
  48
  49                         bcsr5: gpio-controller@11 {
  50                                 #gpio-cells = <2>;
  51                                 compatible = "fsl,mpc8568mds-bcsr-gpio";
  52                                 reg = <0x5 0x1>;
  53                                 gpio-controller;
  54                         };
  55                 };
  56
  57                 pib@4,0 {
  58                         compatible = "fsl,mpc8568mds-pib";
  59                         reg = <4 0 0x8000>;
  60                 };
  61
  62                 pib@5,0 {
  63                         compatible = "fsl,mpc8568mds-pib";
  64                         reg = <5 0 0x8000>;
  65                 };
  66         };
  67
  68         soc: soc8568@e0000000 {
  69                 ranges = <0x0 0x0 0xe0000000 0x100000>;
  70
  71                 i2c-sleep-nexus {
  72                         i2c@3000 {
  73                                 rtc@68 {
  74                                         compatible = "dallas,ds1374";
  75                                         reg = <0x68>;
  76                                         interrupts = <3 1 0 0>;
  77                                 };
  78                         };
  79                 };
  80
  81                 enet0: ethernet@24000 {
  82                         tbi-handle = <&tbi0>;
  83                         phy-handle = <&phy2>;
  84                 };
  85
  86                 mdio@24520 {
  87                         phy0: ethernet-phy@7 {
  88                                 interrupts = <1 1 0 0>;
  89                                 reg = <0x7>;
  90                         };
  91                         phy1: ethernet-phy@1 {
  92                                 interrupts = <2 1 0 0>;
  93                                 reg = <0x1>;
  94                         };
  95                         phy2: ethernet-phy@2 {
  96                                 interrupts = <1 1 0 0>;
  97                                 reg = <0x2>;
  98                         };
  99                         phy3: ethernet-phy@3 {
 100                                 interrupts = <2 1 0 0>;
 101                                 reg = <0x3>;
 102                         };
 103                         tbi0: tbi-phy@11 {
 104                                 reg = <0x11>;
 105                                 device_type = "tbi-phy";
 106                         };
 107                 };
 108
 109                 enet1: ethernet@25000 {
 110                         tbi-handle = <&tbi1>;
 111                         phy-handle = <&phy3>;
 112                         sleep = <&pmc 0x00000040>;
 113                 };
 114
 115                 mdio@25520 {
 116                         tbi1: tbi-phy@11 {
 117                                 reg = <0x11>;
 118                                 device_type = "tbi-phy";
 119                         };
 120                 };
 121
 122                 par_io@e0100 {
 123                         num-ports = <7>;
 124
 125                         pio1: ucc_pin@1 {
 126                                 pio-map = <
 127                         /* port  pin  dir  open_drain  assignment  has_irq */
 128                                         0x4  0xa  0x1  0x0  0x2  0x0    /* TxD0 */
 129                                         0x4  0x9  0x1  0x0  0x2  0x0    /* TxD1 */
 130                                         0x4  0x8  0x1  0x0  0x2  0x0    /* TxD2 */
 131                                         0x4  0x7  0x1  0x0  0x2  0x0    /* TxD3 */
 132                                         0x4  0x17  0x1  0x0  0x2  0x0   /* TxD4 */
 133                                         0x4  0x16  0x1  0x0  0x2  0x0   /* TxD5 */
 134                                         0x4  0x15  0x1  0x0  0x2  0x0   /* TxD6 */
 135                                         0x4  0x14  0x1  0x0  0x2  0x0   /* TxD7 */
 136                                         0x4  0xf  0x2  0x0  0x2  0x0    /* RxD0 */
 137                                         0x4  0xe  0x2  0x0  0x2  0x0    /* RxD1 */
 138                                         0x4  0xd  0x2  0x0  0x2  0x0    /* RxD2 */
 139                                         0x4  0xc  0x2  0x0  0x2  0x0    /* RxD3 */
 140                                         0x4  0x1d  0x2  0x0  0x2  0x0   /* RxD4 */
 141                                         0x4  0x1c  0x2  0x0  0x2  0x0   /* RxD5 */
 142                                         0x4  0x1b  0x2  0x0  0x2  0x0   /* RxD6 */
 143                                         0x4  0x1a  0x2  0x0  0x2  0x0   /* RxD7 */
 144                                         0x4  0xb  0x1  0x0  0x2  0x0    /* TX_EN */
 145                                         0x4  0x18  0x1  0x0  0x2  0x0   /* TX_ER */
 146                                         0x4  0x10  0x2  0x0  0x2  0x0   /* RX_DV */
 147                                         0x4  0x1e  0x2  0x0  0x2  0x0   /* RX_ER */
 148                                         0x4  0x11  0x2  0x0  0x2  0x0   /* RX_CLK */
 149                                         0x4  0x13  0x1  0x0  0x2  0x0   /* GTX_CLK */
 150                                         0x1  0x1f  0x2  0x0  0x3  0x0>; /* GTX125 */
 151                         };
 152
 153                         pio2: ucc_pin@2 {
 154                                 pio-map = <
 155                         /* port  pin  dir  open_drain  assignment  has_irq */
 156                                         0x5  0xa 0x1  0x0  0x2  0x0   /* TxD0 */
 157                                         0x5  0x9 0x1  0x0  0x2  0x0   /* TxD1 */
 158                                         0x5  0x8 0x1  0x0  0x2  0x0   /* TxD2 */
 159                                         0x5  0x7 0x1  0x0  0x2  0x0   /* TxD3 */
 160                                         0x5  0x17 0x1  0x0  0x2  0x0   /* TxD4 */
 161                                         0x5  0x16 0x1  0x0  0x2  0x0   /* TxD5 */
 162                                         0x5  0x15 0x1  0x0  0x2  0x0   /* TxD6 */
 163                                         0x5  0x14 0x1  0x0  0x2  0x0   /* TxD7 */
 164                                         0x5  0xf 0x2  0x0  0x2  0x0   /* RxD0 */
 165                                         0x5  0xe 0x2  0x0  0x2  0x0   /* RxD1 */
 166                                         0x5  0xd 0x2  0x0  0x2  0x0   /* RxD2 */
 167                                         0x5  0xc 0x2  0x0  0x2  0x0   /* RxD3 */
 168                                         0x5  0x1d 0x2  0x0  0x2  0x0   /* RxD4 */
 169                                         0x5  0x1c 0x2  0x0  0x2  0x0   /* RxD5 */
 170                                         0x5  0x1b 0x2  0x0  0x2  0x0   /* RxD6 */
 171                                         0x5  0x1a 0x2  0x0  0x2  0x0   /* RxD7 */
 172                                         0x5  0xb 0x1  0x0  0x2  0x0   /* TX_EN */
 173                                         0x5  0x18 0x1  0x0  0x2  0x0   /* TX_ER */
 174                                         0x5  0x10 0x2  0x0  0x2  0x0   /* RX_DV */
 175                                         0x5  0x1e 0x2  0x0  0x2  0x0   /* RX_ER */
 176                                         0x5  0x11 0x2  0x0  0x2  0x0   /* RX_CLK */
 177                                         0x5  0x13 0x1  0x0  0x2  0x0   /* GTX_CLK */
 178                                         0x1  0x1f 0x2  0x0  0x3  0x0   /* GTX125 */
 179                                         0x4  0x6 0x3  0x0  0x2  0x0   /* MDIO */
 180                                         0x4  0x5 0x1  0x0  0x2  0x0>; /* MDC */
 181                         };
 182                 };
 183         };
 184
 185         qe: qe@e0080000 {
 186                 ranges = <0x0 0x0 0xe0080000 0x40000>;
 187                 reg = <0x0 0xe0080000 0x0 0x480>;
 188
 189                 spi@4c0 {
 190                         mode = "cpu";
 191                 };
 192
 193                 spi@500 {
 194                         mode = "cpu";
 195                 };
 196
 197                 enet2: ucc@2000 {
 198                         device_type = "network";
 199                         compatible = "ucc_geth";
 200                         local-mac-address = [ 00 00 00 00 00 00 ];
 201                         rx-clock-name = "none";
 202                         tx-clock-name = "clk16";
 203                         pio-handle = <&pio1>;
 204                         phy-handle = <&phy0>;
 205                         phy-connection-type = "rgmii-id";
 206                 };
 207
 208                 enet3: ucc@3000 {
 209                         device_type = "network";
 210                         compatible = "ucc_geth";
 211                         local-mac-address = [ 00 00 00 00 00 00 ];
 212                         rx-clock-name = "none";
 213                         tx-clock-name = "clk16";
 214                         pio-handle = <&pio2>;
 215                         phy-handle = <&phy1>;
 216                         phy-connection-type = "rgmii-id";
 217                 };
 218
 219                 mdio@2120 {
 220                         #address-cells = <1>;
 221                         #size-cells = <0>;
 222                         reg = <0x2120 0x18>;
 223                         compatible = "fsl,ucc-mdio";
 224
 225                         /* These are the same PHYs as on
 226                          * gianfar's MDIO bus */
 227                         qe_phy0: ethernet-phy@7 {
 228                                 interrupt-parent = <&mpic>;
 229                                 interrupts = <1 1 0 0>;
 230                                 reg = <0x7>;
 231                         };
 232                         qe_phy1: ethernet-phy@1 {
 233                                 interrupt-parent = <&mpic>;
 234                                 interrupts = <2 1 0 0>;
 235                                 reg = <0x1>;
 236                         };
 237                         qe_phy2: ethernet-phy@2 {
 238                                 interrupt-parent = <&mpic>;
 239                                 interrupts = <1 1 0 0>;
 240                                 reg = <0x2>;
 241                         };
 242                         qe_phy3: ethernet-phy@3 {
 243                                 interrupt-parent = <&mpic>;
 244                                 interrupts = <2 1 0 0>;
 245                                 reg = <0x3>;
 246                         };
 247                 };
 248         };
 249
 250         pci0: pci@e0008000 {
 251                 reg = <0x0 0xe0008000 0x0 0x1000>;
 252                 ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
 253                           0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>;
 254                 clock-frequency = <66666666>;
 255                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 256                 interrupt-map = <
 257                         /* IDSEL 0x12 AD18 */
 258                         0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0
 259                         0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0
 260                         0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0
 261                         0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0
 262
 263                         /* IDSEL 0x13 AD19 */
 264                         0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0
 265                         0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0
 266                         0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
 267                         0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>;
 268         };
 269
 270         /* PCI Express */
 271         pci1: pcie@e000a000 {
 272                 ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000
 273                           0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>;
 274                 reg = <0x0 0xe000a000 0x0 0x1000>;
 275                 pcie@0 {
 276                         ranges = <0x2000000 0x0 0xa0000000
 277                                   0x2000000 0x0 0xa0000000
 278                                   0x0 0x10000000
 279
 280                                   0x1000000 0x0 0x0
 281                                   0x1000000 0x0 0x0
 282                                   0x0 0x800000>;
 283                 };
 284         };
 285
 286         rio: rapidio@e00c00000 {
 287                 reg = <0x0 0xe00c0000 0x0 0x20000>;
 288                 port1 {
 289                         ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
 290                 };
 291         };
 292
 293         leds {
 294                 compatible = "gpio-leds";
 295
 296                 green {
 297                         gpios = <&bcsr5 1 0>;
 298                 };
 299
 300                 amber {
 301                         gpios = <&bcsr5 2 0>;
 302                 };
 303
 304                 red {
 305                         gpios = <&bcsr5 3 0>;
 306                 };
 307         };
 308 };
 309
 310 /include/ "mpc8568si-post.dtsi"