src/powerpc/fsl/p1025rdb_32b.dts

   1 /*
   2  * P1025 RDB Device Tree Source (32-bit address map)
   3  *
   4  * Copyright 2011 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 /include/ "p1021si-pre.dtsi"
  36 / {
  37         model = "fsl,P1025RDB";
  38         compatible = "fsl,P1025RDB";
  39
  40         memory {
  41                 device_type = "memory";
  42         };
  43
  44         lbc: localbus@ffe05000 {
  45                 reg = <0 0xffe05000 0 0x1000>;
  46
  47                 /* NOR, NAND Flashes */
  48                 ranges = <0x0 0x0 0x0 0xef000000 0x01000000
  49                           0x1 0x0 0x0 0xff800000 0x00040000>;
  50         };
  51
  52         soc: soc@ffe00000 {
  53                 ranges = <0x0 0x0 0xffe00000 0x100000>;
  54         };
  55
  56         pci0: pcie@ffe09000 {
  57                 ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
  58                           0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
  59                 reg = <0 0xffe09000 0 0x1000>;
  60                 pcie@0 {
  61                         ranges = <0x2000000 0x0 0xe0000000
  62                                   0x2000000 0x0 0xe0000000
  63                                   0x0 0x20000000
  64
  65                                   0x1000000 0x0 0x0
  66                                   0x1000000 0x0 0x0
  67                                   0x0 0x100000>;
  68                 };
  69         };
  70
  71         pci1: pcie@ffe0a000 {
  72                 reg = <0 0xffe0a000 0 0x1000>;
  73                 ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
  74                           0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
  75                 pcie@0 {
  76                         ranges = <0x2000000 0x0 0xe0000000
  77                                   0x2000000 0x0 0xe0000000
  78                                   0x0 0x20000000
  79
  80                                   0x1000000 0x0 0x0
  81                                   0x1000000 0x0 0x0
  82                                   0x0 0x100000>;
  83                 };
  84         };
  85
  86         qe: qe@ffe80000 {
  87                 ranges = <0x0 0x0 0xffe80000 0x40000>;
  88                 reg = <0 0xffe80000 0 0x480>;
  89                 brg-frequency = <0>;
  90                 bus-frequency = <0>;
  91                 status = "disabled"; /* no firmware loaded */
  92
  93                 enet3: ucc@2000 {
  94                         device_type = "network";
  95                         compatible = "ucc_geth";
  96                         rx-clock-name = "clk12";
  97                         tx-clock-name = "clk9";
  98                         pio-handle = <&pio1>;
  99                         phy-handle = <&qe_phy0>;
 100                         phy-connection-type = "mii";
 101                 };
 102
 103                 mdio@2120 {
 104                         qe_phy0: ethernet-phy@0 {
 105                                 interrupt-parent = <&mpic>;
 106                                 interrupts = <4 1 0 0>;
 107                                 reg = <0x6>;
 108                         };
 109                         qe_phy1: ethernet-phy@3 {
 110                                 interrupt-parent = <&mpic>;
 111                                 interrupts = <5 1 0 0>;
 112                                 reg = <0x3>;
 113                         };
 114                         tbi-phy@11 {
 115                                 reg = <0x11>;
 116                                 device_type = "tbi-phy";
 117                         };
 118                 };
 119
 120                 enet4: ucc@2400 {
 121                         device_type = "network";
 122                         compatible = "ucc_geth";
 123                         rx-clock-name = "none";
 124                         tx-clock-name = "clk13";
 125                         pio-handle = <&pio2>;
 126                         phy-handle = <&qe_phy1>;
 127                         phy-connection-type = "rmii";
 128                 };
 129         };
 130 };
 131
 132 /include/ "p1025rdb.dtsi"
 133 /include/ "p1021si-post.dtsi"