src/powerpc/fsl/t1023rdb.dts

   1 /*
   2  * T1023 RDB Device Tree Source
   3  *
   4  * Copyright 2014 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 /include/ "t102xsi-pre.dtsi"
  36
  37 / {
  38         model = "fsl,T1023RDB";
  39         compatible = "fsl,T1023RDB";
  40         #address-cells = <2>;
  41         #size-cells = <2>;
  42         interrupt-parent = <&mpic>;
  43
  44         reserved-memory {
  45                 #address-cells = <2>;
  46                 #size-cells = <2>;
  47                 ranges;
  48
  49                 bman_fbpr: bman-fbpr {
  50                         size = <0 0x1000000>;
  51                         alignment = <0 0x1000000>;
  52                 };
  53
  54                 qman_fqd: qman-fqd {
  55                         size = <0 0x400000>;
  56                         alignment = <0 0x400000>;
  57                 };
  58
  59                 qman_pfdr: qman-pfdr {
  60                         size = <0 0x2000000>;
  61                         alignment = <0 0x2000000>;
  62                 };
  63         };
  64
  65         ifc: localbus@ffe124000 {
  66                 reg = <0xf 0xfe124000 0 0x2000>;
  67                 ranges = <0 0 0xf 0xe8000000 0x08000000
  68                           1 0 0xf 0xff800000 0x00010000>;
  69
  70                 nor@0,0 {
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73                         status = "disabled";
  74                         compatible = "cfi-flash";
  75                         reg = <0x0 0x0 0x8000000>;
  76                         bank-width = <2>;
  77                         device-width = <1>;
  78                 };
  79
  80                 nand@1,0 {
  81                         #address-cells = <1>;
  82                         #size-cells = <1>;
  83                         compatible = "fsl,ifc-nand";
  84                         reg = <0x1 0x0 0x10000>;
  85                 };
  86         };
  87
  88         memory {
  89                 device_type = "memory";
  90         };
  91
  92         dcsr: dcsr@f00000000 {
  93                 ranges = <0x00000000 0xf 0x00000000 0x01072000>;
  94         };
  95
  96         bportals: bman-portals@ff4000000 {
  97                 ranges = <0x0 0xf 0xf4000000 0x2000000>;
  98         };
  99
 100         qportals: qman-portals@ff6000000 {
 101                 ranges = <0x0 0xf 0xf6000000 0x2000000>;
 102         };
 103
 104         soc: soc@ffe000000 {
 105                 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
 106                 reg = <0xf 0xfe000000 0 0x00001000>;
 107                 spi@110000 {
 108                         flash@0 {
 109                                 #address-cells = <1>;
 110                                 #size-cells = <1>;
 111                                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 112                                 reg = <0>;
 113                                 spi-max-frequency = <10000000>; /* input clk */
 114                         };
 115                 };
 116
 117                 i2c@118000 {
 118                         eeprom@50 {
 119                                 compatible = "st,m24256";
 120                                 reg = <0x50>;
 121                         };
 122
 123                         rtc@68 {
 124                                 compatible = "dallas,ds1339";
 125                                 reg = <0x68>;
 126                                 interrupts = <0x5 0x1 0 0>;
 127                         };
 128                 };
 129
 130                 i2c@118100 {
 131                         current-sensor@40 {
 132                                 compatible = "ti,ina220";
 133                                 reg = <0x40>;
 134                                 shunt-resistor = <1000>;
 135                         };
 136
 137                         current-sensor@41 {
 138                                 compatible = "ti,ina220";
 139                                 reg = <0x41>;
 140                                 shunt-resistor = <1000>;
 141                         };
 142                 };
 143
 144                 fman@400000 {
 145                         fm1mac1: ethernet@e0000 {
 146                                 phy-handle = <&sgmii_rtk_phy2>;
 147                                 phy-connection-type = "sgmii";
 148                                 sleep = <&rcpm 0x80000000>;
 149                         };
 150
 151                         fm1mac2: ethernet@e2000 {
 152                                 sleep = <&rcpm 0x40000000>;
 153                         };
 154
 155                         fm1mac3: ethernet@e4000 {
 156                                 phy-handle = <&sgmii_aqr_phy3>;
 157                                 phy-connection-type = "2500base-x";
 158                                 sleep = <&rcpm 0x20000000>;
 159                         };
 160
 161                         fm1mac4: ethernet@e6000 {
 162                                 phy-handle = <&rgmii_rtk_phy1>;
 163                                 phy-connection-type = "rgmii";
 164                                 sleep = <&rcpm 0x10000000>;
 165                         };
 166
 167
 168                         mdio0: mdio@fc000 {
 169                                 rgmii_rtk_phy1: ethernet-phy@1 {
 170                                         reg = <0x1>;
 171                                 };
 172                                 sgmii_rtk_phy2: ethernet-phy@3 {
 173                                         reg = <0x3>;
 174                                 };
 175                         };
 176
 177                         xmdio0: mdio@fd000 {
 178                                 sgmii_aqr_phy3: ethernet-phy@2 {
 179                                         compatible = "ethernet-phy-ieee802.3-c45";
 180                                         reg = <0x2>;
 181                                 };
 182                         };
 183                 };
 184         };
 185
 186         pci0: pcie@ffe240000 {
 187                 reg = <0xf 0xfe240000 0 0x10000>;
 188                 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
 189                           0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
 190                 pcie@0 {
 191                         ranges = <0x02000000 0 0xe0000000
 192                                   0x02000000 0 0xe0000000
 193                                   0 0x10000000
 194
 195                                   0x01000000 0 0x00000000
 196                                   0x01000000 0 0x00000000
 197                                   0 0x00010000>;
 198                 };
 199         };
 200
 201         pci1: pcie@ffe250000 {
 202                 reg = <0xf 0xfe250000 0 0x10000>;
 203                 ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
 204                           0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
 205                 pcie@0 {
 206                         ranges = <0x02000000 0 0xe0000000
 207                                   0x02000000 0 0xe0000000
 208                                   0 0x10000000
 209
 210                                   0x01000000 0 0x00000000
 211                                   0x01000000 0 0x00000000
 212                                   0 0x00010000>;
 213                 };
 214         };
 215
 216         pci2: pcie@ffe260000 {
 217                 reg = <0xf 0xfe260000 0 0x10000>;
 218                 ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
 219                           0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
 220                 pcie@0 {
 221                         ranges = <0x02000000 0 0xe0000000
 222                                   0x02000000 0 0xe0000000
 223                                   0 0x10000000
 224
 225                                   0x01000000 0 0x00000000
 226                                   0x01000000 0 0x00000000
 227                                   0 0x00010000>;
 228                 };
 229         };
 230 };
 231
 232 #include "t1023si-post.dtsi"