src/powerpc/mpc8308_p1m.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * mpc8308_p1m Device Tree Source
   4  *
   5  * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
   6  */
   7
   8 /dts-v1/;
   9
  10 / {
  11         compatible = "denx,mpc8308_p1m";
  12         #address-cells = <1>;
  13         #size-cells = <1>;
  14
  15         aliases {
  16                 ethernet0 = &enet0;
  17                 ethernet1 = &enet1;
  18                 serial0 = &serial0;
  19                 serial1 = &serial1;
  20                 pci0 = &pci0;
  21         };
  22
  23         cpus {
  24                 #address-cells = <1>;
  25                 #size-cells = <0>;
  26
  27                 PowerPC,8308@0 {
  28                         device_type = "cpu";
  29                         reg = <0x0>;
  30                         d-cache-line-size = <32>;
  31                         i-cache-line-size = <32>;
  32                         d-cache-size = <16384>;
  33                         i-cache-size = <16384>;
  34                         timebase-frequency = <0>;       // from bootloader
  35                         bus-frequency = <0>;            // from bootloader
  36                         clock-frequency = <0>;          // from bootloader
  37                 };
  38         };
  39
  40         memory {
  41                 device_type = "memory";
  42                 reg = <0x00000000 0x08000000>;  // 128MB at 0
  43         };
  44
  45         localbus@e0005000 {
  46                 #address-cells = <2>;
  47                 #size-cells = <1>;
  48                 compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
  49                 reg = <0xe0005000 0x1000>;
  50                 interrupts = <77 0x8>;
  51                 interrupt-parent = <&ipic>;
  52
  53                 ranges = <0x0 0x0 0xfc000000 0x04000000
  54                           0x1 0x0 0xfbff0000 0x00008000
  55                           0x2 0x0 0xfbff8000 0x00008000>;
  56
  57                 flash@0,0 {
  58                         #address-cells = <1>;
  59                         #size-cells = <1>;
  60                         compatible = "cfi-flash";
  61                         reg = <0x0 0x0 0x4000000>;
  62                         bank-width = <2>;
  63                         device-width = <1>;
  64
  65                         u-boot@0 {
  66                                 reg = <0x0 0x60000>;
  67                                 read-only;
  68                         };
  69                         env@60000 {
  70                                 reg = <0x60000 0x20000>;
  71                         };
  72                         env1@80000 {
  73                                 reg = <0x80000 0x20000>;
  74                         };
  75                         kernel@a0000 {
  76                                 reg = <0xa0000 0x200000>;
  77                         };
  78                         dtb@2a0000 {
  79                                 reg = <0x2a0000 0x20000>;
  80                         };
  81                         ramdisk@2c0000 {
  82                                 reg = <0x2c0000 0x640000>;
  83                         };
  84                         user@700000 {
  85                                 reg = <0x700000 0x3900000>;
  86                         };
  87                 };
  88
  89                 can@1,0 {
  90                         compatible = "nxp,sja1000";
  91                         reg = <0x1 0x0 0x80>;
  92                         interrupts = <18 0x8>;
  93                         interrups-parent = <&ipic>;
  94                 };
  95
  96                 cpld@2,0 {
  97                         compatible = "denx,mpc8308_p1m-cpld";
  98                         reg = <0x2 0x0 0x8>;
  99                         interrupts = <48 0x8>;
 100                         interrups-parent = <&ipic>;
 101                 };
 102         };
 103
 104         immr@e0000000 {
 105                 #address-cells = <1>;
 106                 #size-cells = <1>;
 107                 device_type = "soc";
 108                 compatible = "fsl,mpc8308-immr", "simple-bus";
 109                 ranges = <0 0xe0000000 0x00100000>;
 110                 reg = <0xe0000000 0x00000200>;
 111                 bus-frequency = <0>;
 112
 113                 i2c@3000 {
 114                         #address-cells = <1>;
 115                         #size-cells = <0>;
 116                         compatible = "fsl-i2c";
 117                         reg = <0x3000 0x100>;
 118                         interrupts = <14 0x8>;
 119                         interrupt-parent = <&ipic>;
 120                         dfsrr;
 121                         fram@50 {
 122                                 compatible = "ramtron,24c64", "atmel,24c64";
 123                                 reg = <0x50>;
 124                         };
 125                 };
 126
 127                 i2c@3100 {
 128                         #address-cells = <1>;
 129                         #size-cells = <0>;
 130                         compatible = "fsl-i2c";
 131                         reg = <0x3100 0x100>;
 132                         interrupts = <15 0x8>;
 133                         interrupt-parent = <&ipic>;
 134                         dfsrr;
 135                         pwm@28 {
 136                                 compatible = "maxim,ds1050";
 137                                 reg = <0x28>;
 138                         };
 139                         sensor@48 {
 140                                 compatible = "maxim,max6625";
 141                                 reg = <0x48>;
 142                         };
 143                         sensor@49 {
 144                                 compatible = "maxim,max6625";
 145                                 reg = <0x49>;
 146                         };
 147                         sensor@4b {
 148                                 compatible = "maxim,max6625";
 149                                 reg = <0x4b>;
 150                         };
 151                 };
 152
 153                 usb@23000 {
 154                         compatible = "fsl-usb2-dr";
 155                         reg = <0x23000 0x1000>;
 156                         #address-cells = <1>;
 157                         #size-cells = <0>;
 158                         interrupt-parent = <&ipic>;
 159                         interrupts = <38 0x8>;
 160                         dr_mode = "peripheral";
 161                         phy_type = "ulpi";
 162                 };
 163
 164                 enet0: ethernet@24000 {
 165                         #address-cells = <1>;
 166                         #size-cells = <1>;
 167                         ranges = <0x0 0x24000 0x1000>;
 168
 169                         cell-index = <0>;
 170                         device_type = "network";
 171                         model = "eTSEC";
 172                         compatible = "gianfar";
 173                         reg = <0x24000 0x1000>;
 174                         local-mac-address = [ 00 00 00 00 00 00 ];
 175                         interrupts = <32 0x8 33 0x8 34 0x8>;
 176                         interrupt-parent = <&ipic>;
 177                         phy-handle = < &phy1 >;
 178
 179                         mdio@520 {
 180                                 #address-cells = <1>;
 181                                 #size-cells = <0>;
 182                                 compatible = "fsl,gianfar-mdio";
 183                                 reg = <0x520 0x20>;
 184                                 phy1: ethernet-phy@1 {
 185                                         interrupt-parent = <&ipic>;
 186                                         interrupts = <17 0x8>;
 187                                         reg = <0x1>;
 188                                 };
 189                                 phy2: ethernet-phy@2 {
 190                                         interrupt-parent = <&ipic>;
 191                                         interrupts = <19 0x8>;
 192                                         reg = <0x2>;
 193                                 };
 194                                 tbi0: tbi-phy@11 {
 195                                         reg = <0x11>;
 196                                         device_type = "tbi-phy";
 197                                 };
 198                         };
 199                 };
 200
 201                 enet1: ethernet@25000 {
 202                         #address-cells = <1>;
 203                         #size-cells = <1>;
 204                         cell-index = <1>;
 205                         device_type = "network";
 206                         model = "eTSEC";
 207                         compatible = "gianfar";
 208                         reg = <0x25000 0x1000>;
 209                         ranges = <0x0 0x25000 0x1000>;
 210                         local-mac-address = [ 00 00 00 00 00 00 ];
 211                         interrupts = <35 0x8 36 0x8 37 0x8>;
 212                         interrupt-parent = <&ipic>;
 213                         phy-handle = < &phy2 >;
 214
 215                         mdio@520 {
 216                                 #address-cells = <1>;
 217                                 #size-cells = <0>;
 218                                 compatible = "fsl,gianfar-tbi";
 219                                 reg = <0x520 0x20>;
 220                                 tbi1: tbi-phy@11 {
 221                                         reg = <0x11>;
 222                                         device_type = "tbi-phy";
 223                                 };
 224                         };
 225                 };
 226
 227                 serial0: serial@4500 {
 228                         cell-index = <0>;
 229                         device_type = "serial";
 230                         compatible = "fsl,ns16550", "ns16550";
 231                         reg = <0x4500 0x100>;
 232                         clock-frequency = <133333333>;
 233                         interrupts = <9 0x8>;
 234                         interrupt-parent = <&ipic>;
 235                 };
 236
 237                 serial1: serial@4600 {
 238                         cell-index = <1>;
 239                         device_type = "serial";
 240                         compatible = "fsl,ns16550", "ns16550";
 241                         reg = <0x4600 0x100>;
 242                         clock-frequency = <133333333>;
 243                         interrupts = <10 0x8>;
 244                         interrupt-parent = <&ipic>;
 245                 };
 246
 247                 gpio@c00 {
 248                         #gpio-cells = <2>;
 249                         compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
 250                         reg = <0xc00 0x18>;
 251                         interrupts = <74 0x8>;
 252                         interrupt-parent = <&ipic>;
 253                         gpio-controller;
 254                 };
 255
 256                 timer@500 {
 257                         compatible = "fsl,mpc8308-gtm", "fsl,gtm";
 258                         reg = <0x500 0x100>;
 259                         interrupts = <90 8 78 8 84 8 72 8>;
 260                         interrupt-parent = <&ipic>;
 261                         clock-frequency = <133333333>;
 262                 };
 263
 264                 /* IPIC
 265                  * interrupts cell = <intr #, sense>
 266                  * sense values match linux IORESOURCE_IRQ_* defines:
 267                  * sense == 8: Level, low assertion
 268                  * sense == 2: Edge, high-to-low change
 269                  */
 270                 ipic: interrupt-controller@700 {
 271                         compatible = "fsl,ipic";
 272                         interrupt-controller;
 273                         #address-cells = <0>;
 274                         #interrupt-cells = <2>;
 275                         reg = <0x700 0x100>;
 276                         device_type = "ipic";
 277                 };
 278
 279                 ipic-msi@7c0 {
 280                         compatible = "fsl,ipic-msi";
 281                         reg = <0x7c0 0x40>;
 282                         msi-available-ranges = <0x0 0x100>;
 283                         interrupts = < 0x43 0x8
 284                                         0x4  0x8
 285                                         0x51 0x8
 286                                         0x52 0x8
 287                                         0x56 0x8
 288                                         0x57 0x8
 289                                         0x58 0x8
 290                                         0x59 0x8 >;
 291                         interrupt-parent = < &ipic >;
 292                 };
 293
 294                 dma@2c000 {
 295                         compatible = "fsl,mpc8308-dma";
 296                         reg = <0x2c000 0x1800>;
 297                         interrupts = <3 0x8
 298                                         94 0x8>;
 299                         interrupt-parent = < &ipic >;
 300                 };
 301
 302         };
 303
 304         pci0: pcie@e0009000 {
 305                 #address-cells = <3>;
 306                 #size-cells = <2>;
 307                 #interrupt-cells = <1>;
 308                 device_type = "pci";
 309                 compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
 310                 reg = <0xe0009000 0x00001000
 311                         0xb0000000 0x01000000>;
 312                 ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 313                           0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
 314                 bus-range = <0 0>;
 315                 interrupt-map-mask = <0 0 0 0>;
 316                 interrupt-map = <0 0 0 0 &ipic 1 8>;
 317                 interrupts = <0x1 0x8>;
 318                 interrupt-parent = <&ipic>;
 319                 clock-frequency = <0>;
 320
 321                 pcie@0 {
 322                         #address-cells = <3>;
 323                         #size-cells = <2>;
 324                         device_type = "pci";
 325                         reg = <0 0 0 0 0>;
 326                         ranges = <0x02000000 0 0xa0000000
 327                                   0x02000000 0 0xa0000000
 328                                   0 0x10000000
 329                                   0x01000000 0 0x00000000
 330                                   0x01000000 0 0x00000000
 331                                   0 0x00800000>;
 332                 };
 333         };
 334 };