src/powerpc/tqm5200.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * TQM5200 board Device Tree Source
   4  *
   5  * Copyright (C) 2007 Semihalf
   6  * Marian Balakowicz <m8@semihalf.com>
   7  */
   8
   9 /dts-v1/;
  10
  11 / {
  12         model = "tqc,tqm5200";
  13         compatible = "tqc,tqm5200";
  14         #address-cells = <1>;
  15         #size-cells = <1>;
  16         interrupt-parent = <&mpc5200_pic>;
  17
  18         cpus {
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21
  22                 PowerPC,5200@0 {
  23                         device_type = "cpu";
  24                         reg = <0>;
  25                         d-cache-line-size = <32>;
  26                         i-cache-line-size = <32>;
  27                         d-cache-size = <0x4000>;        // L1, 16K
  28                         i-cache-size = <0x4000>;        // L1, 16K
  29                         timebase-frequency = <0>;       // from bootloader
  30                         bus-frequency = <0>;            // from bootloader
  31                         clock-frequency = <0>;          // from bootloader
  32                 };
  33         };
  34
  35         memory@0 {
  36                 device_type = "memory";
  37                 reg = <0x00000000 0x04000000>;  // 64MB
  38         };
  39
  40         soc5200@f0000000 {
  41                 #address-cells = <1>;
  42                 #size-cells = <1>;
  43                 compatible = "fsl,mpc5200-immr";
  44                 ranges = <0 0xf0000000 0x0000c000>;
  45                 reg = <0xf0000000 0x00000100>;
  46                 bus-frequency = <0>;            // from bootloader
  47                 system-frequency = <0>;         // from bootloader
  48
  49                 cdm@200 {
  50                         compatible = "fsl,mpc5200-cdm";
  51                         reg = <0x200 0x38>;
  52                 };
  53
  54                 mpc5200_pic: interrupt-controller@500 {
  55                         // 5200 interrupts are encoded into two levels;
  56                         interrupt-controller;
  57                         #interrupt-cells = <3>;
  58                         compatible = "fsl,mpc5200-pic";
  59                         reg = <0x500 0x80>;
  60                 };
  61
  62                 timer@600 {     // General Purpose Timer
  63                         compatible = "fsl,mpc5200-gpt";
  64                         reg = <0x600 0x10>;
  65                         interrupts = <1 9 0>;
  66                         fsl,has-wdt;
  67                 };
  68
  69                 can@900 {
  70                         compatible = "fsl,mpc5200-mscan";
  71                         interrupts = <2 17 0>;
  72                         reg = <0x900 0x80>;
  73                 };
  74
  75                 can@980 {
  76                         compatible = "fsl,mpc5200-mscan";
  77                         interrupts = <2 18 0>;
  78                         reg = <0x980 0x80>;
  79                 };
  80
  81                 gpio_simple: gpio@b00 {
  82                         compatible = "fsl,mpc5200-gpio";
  83                         reg = <0xb00 0x40>;
  84                         interrupts = <1 7 0>;
  85                         gpio-controller;
  86                         #gpio-cells = <2>;
  87                 };
  88
  89                 usb@1000 {
  90                         compatible = "fsl,mpc5200-ohci","ohci-be";
  91                         reg = <0x1000 0xff>;
  92                         interrupts = <2 6 0>;
  93                 };
  94
  95                 dma-controller@1200 {
  96                         compatible = "fsl,mpc5200-bestcomm";
  97                         reg = <0x1200 0x80>;
  98                         interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
  99                                       3 4 0  3 5 0  3 6 0  3 7 0
 100                                       3 8 0  3 9 0  3 10 0  3 11 0
 101                                       3 12 0  3 13 0  3 14 0  3 15 0>;
 102                 };
 103
 104                 xlb@1f00 {
 105                         compatible = "fsl,mpc5200-xlb";
 106                         reg = <0x1f00 0x100>;
 107                 };
 108
 109                 serial@2000 {           // PSC1
 110                         compatible = "fsl,mpc5200-psc-uart";
 111                         reg = <0x2000 0x100>;
 112                         interrupts = <2 1 0>;
 113                 };
 114
 115                 serial@2200 {           // PSC2
 116                         compatible = "fsl,mpc5200-psc-uart";
 117                         reg = <0x2200 0x100>;
 118                         interrupts = <2 2 0>;
 119                 };
 120
 121                 serial@2400 {           // PSC3
 122                         compatible = "fsl,mpc5200-psc-uart";
 123                         reg = <0x2400 0x100>;
 124                         interrupts = <2 3 0>;
 125                 };
 126
 127                 ethernet@3000 {
 128                         compatible = "fsl,mpc5200-fec";
 129                         reg = <0x3000 0x400>;
 130                         local-mac-address = [ 00 00 00 00 00 00 ];
 131                         interrupts = <2 5 0>;
 132                         phy-handle = <&phy0>;
 133                 };
 134
 135                 mdio@3000 {
 136                         #address-cells = <1>;
 137                         #size-cells = <0>;
 138                         compatible = "fsl,mpc5200-mdio";
 139                         reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
 140                         interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
 141
 142                         phy0: ethernet-phy@0 {
 143                                 reg = <0>;
 144                         };
 145                 };
 146
 147                 ata@3a00 {
 148                         compatible = "fsl,mpc5200-ata";
 149                         reg = <0x3a00 0x100>;
 150                         interrupts = <2 7 0>;
 151                 };
 152
 153                 i2c@3d40 {
 154                         #address-cells = <1>;
 155                         #size-cells = <0>;
 156                         compatible = "fsl,mpc5200-i2c","fsl-i2c";
 157                         reg = <0x3d40 0x40>;
 158                         interrupts = <2 16 0>;
 159
 160                          rtc@68 {
 161                                 compatible = "dallas,ds1307";
 162                                 reg = <0x68>;
 163                         };
 164                 };
 165
 166                 sram@8000 {
 167                         compatible = "fsl,mpc5200-sram";
 168                         reg = <0x8000 0x4000>;
 169                 };
 170         };
 171
 172         localbus {
 173                 compatible = "fsl,mpc5200-lpb","simple-bus";
 174                 #address-cells = <2>;
 175                 #size-cells = <1>;
 176                 ranges = <0 0 0xfc000000 0x02000000>;
 177
 178                 flash@0,0 {
 179                         compatible = "cfi-flash";
 180                         reg = <0 0 0x02000000>;
 181                         bank-width = <4>;
 182                         device-width = <2>;
 183                         #size-cells = <1>;
 184                         #address-cells = <1>;
 185                 };
 186         };
 187
 188         pci@f0000d00 {
 189                 #interrupt-cells = <1>;
 190                 #size-cells = <2>;
 191                 #address-cells = <3>;
 192                 device_type = "pci";
 193                 compatible = "fsl,mpc5200-pci";
 194                 reg = <0xf0000d00 0x100>;
 195                 interrupt-map-mask = <0xf800 0 0 7>;
 196                 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
 197                                  0xc000 0 0 2 &mpc5200_pic 0 0 3
 198                                  0xc000 0 0 3 &mpc5200_pic 0 0 3
 199                                  0xc000 0 0 4 &mpc5200_pic 0 0 3>;
 200                 clock-frequency = <0>; // From boot loader
 201                 interrupts = <2 8 0 2 9 0 2 10 0>;
 202                 bus-range = <0 0>;
 203                 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000>,
 204                          <0x02000000 0 0x90000000 0x90000000 0 0x10000000>,
 205                          <0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 206         };
 207 };