test/old.TEST-14-IMSM/test.sh

   1 #!/bin/bash
   2 TEST_DESCRIPTION="root filesystem on LVM PV on a isw dmraid"
   3
   4 KVERSION=${KVERSION-$(uname -r)}
   5
   6 # Uncomment this to debug failures
   7 #DEBUGFAIL="rd.shell rd.break"
   8 #DEBUGFAIL="$DEBUGFAIL udev.log-priority=debug"
   9
  10 client_run() {
  11     echo "CLIENT TEST START: $@"
  12     $testdir/run-qemu \
  13         -hda $TESTDIR/root.ext2 \
  14         -hdb $TESTDIR/disk1 \
  15         -hdc $TESTDIR/disk2 \
  16         -m 256M -nographic \
  17         -net none -kernel /boot/vmlinuz-$KVERSION \
  18         -append "$@ root=LABEL=root rw quiet rd.retry=5 rd.debug console=ttyS0,115200n81 selinux=0 rd.info $DEBUGFAIL" \
  19         -initrd $TESTDIR/initramfs.testing
  20     if ! grep -F -m 1 -q dracut-root-block-success $TESTDIR/root.ext2; then
  21         echo "CLIENT TEST END: $@ [FAIL]"
  22         return 1;
  23     fi
  24
  25     sed -i -e 's#dracut-root-block-success#dracut-root-block-xxxxxxx#' $TESTDIR/root.ext2
  26     echo "CLIENT TEST END: $@ [OK]"
  27     return 0
  28 }
  29
  30 test_run() {
  31     client_run rd.md.imsm=0 || return 1
  32     echo "IMSM test does not work anymore"
  33     return 0
  34     client_run || return 1
  35     client_run rd.dm=0 || return 1
  36     # This test succeeds, because the mirror parts are found without
  37     # assembling the mirror itsself, which is what we want
  38     client_run rd.md=0 rd.md.imsm failme && return 1
  39     client_run rd.md=0 failme && return 1
  40     # the following test hangs on newer md
  41     #client_run rd.dm=0 rd.md.imsm rd.md.conf=0 || return 1
  42    return 0
  43 }
  44
  45 test_setup() {
  46 #   echo "IMSM test does not work anymore"
  47 #   return 1
  48
  49     # Create the blank file to use as a root filesystem
  50     rm -f $TESTDIR/root.ext2
  51     rm -f $TESTDIR/disk1
  52     rm -f $TESTDIR/disk2
  53     dd if=/dev/null of=$TESTDIR/root.ext2 bs=1M seek=1
  54     dd if=/dev/null of=$TESTDIR/disk1 bs=1M seek=80
  55     dd if=/dev/null of=$TESTDIR/disk2 bs=1M seek=80
  56
  57     kernel=$KVERSION
  58     # Create what will eventually be our root filesystem onto an overlay
  59     (
  60         export initdir=$TESTDIR/overlay/source
  61         . $basedir/dracut-functions.sh
  62         dracut_install sh df free ls shutdown poweroff stty cat ps ln ip route \
  63             mount dmesg ifconfig dhclient mkdir cp ping dhclient
  64         for _terminfodir in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
  65             [ -f ${_terminfodir}/l/linux ] && break
  66         done
  67         dracut_install -o ${_terminfodir}/l/linux
  68         inst "$basedir/modules.d/40network/dhclient-script.sh" "/sbin/dhclient-script"
  69         inst "$basedir/modules.d/40network/ifup.sh" "/sbin/ifup"
  70         dracut_install grep
  71         inst ./test-init.sh /sbin/init
  72         find_binary plymouth >/dev/null && dracut_install plymouth
  73         (cd "$initdir"; mkdir -p dev sys proc etc var/run tmp )
  74         cp -a /etc/ld.so.conf* $initdir/etc
  75         mkdir $initdir/run
  76         sudo ldconfig -r "$initdir"
  77     )
  78
  79     # second, install the files needed to make the root filesystem
  80     (
  81         export initdir=$TESTDIR/overlay
  82         . $basedir/dracut-functions.sh
  83         dracut_install sfdisk mke2fs poweroff cp umount
  84         inst_hook initqueue 01 ./create-root.sh
  85         inst_simple ./99-idesymlinks.rules /etc/udev/rules.d/99-idesymlinks.rules
  86     )
  87
  88     # create an initramfs that will create the target root filesystem.
  89     # We do it this way so that we do not risk trashing the host mdraid
  90     # devices, volume groups, encrypted partitions, etc.
  91     $basedir/dracut.sh -l -i $TESTDIR/overlay / \
  92         -m "dash lvm mdraid dmraid udev-rules base rootfs-block kernel-modules" \
  93         -d "piix ide-gd_mod ata_piix ext2 sd_mod dm-multipath dm-crypt dm-round-robin faulty linear multipath raid0 raid10 raid1 raid456" \
  94         -f $TESTDIR/initramfs.makeroot $KVERSION || return 1
  95     rm -rf $TESTDIR/overlay
  96     # Invoke KVM and/or QEMU to actually create the target filesystem.
  97     $testdir/run-qemu \
  98         -hda $TESTDIR/root.ext2 \
  99         -hdb $TESTDIR/disk1 \
 100         -hdc $TESTDIR/disk2 \
 101         -m 256M -nographic -net none \
 102         -kernel "/boot/vmlinuz-$kernel" \
 103         -append "root=/dev/dracut/root rw rootfstype=ext2 quiet console=ttyS0,115200n81 selinux=0" \
 104         -initrd $TESTDIR/initramfs.makeroot  || return 1
 105     grep -F -m 1 -q dracut-root-block-created $TESTDIR/root.ext2 || return 1
 106     (
 107         export initdir=$TESTDIR/overlay
 108         . $basedir/dracut-functions.sh
 109         dracut_install poweroff shutdown
 110         inst_hook emergency 000 ./hard-off.sh
 111         inst_simple ./99-idesymlinks.rules /etc/udev/rules.d/99-idesymlinks.rules
 112     )
 113     sudo $basedir/dracut.sh -l -i $TESTDIR/overlay / \
 114         -o "plymouth network" \
 115         -a "debug" \
 116         -d "piix ide-gd_mod ata_piix ext2 sd_mod" \
 117         -f $TESTDIR/initramfs.testing $KVERSION || return 1
 118 }
 119
 120 test_cleanup() {
 121     return 0
 122 }
 123
 124 . $testdir/test-functions