]>
git.ipfire.org Git - people/ms/u-boot.git/blob - tools/binman/etype/u_boot_with_ucode_ptr.py
1 # Copyright (c) 2016 Google, Inc
2 # Written by Simon Glass <sjg@chromium.org>
4 # SPDX-License-Identifier: GPL-2.0+
6 # Entry-type module for a U-Boot binary with an embedded microcode pointer
12 from entry
import Entry
13 from blob
import Entry_blob
17 class Entry_u_boot_with_ucode_ptr(Entry_blob
):
18 """U-Boot with embedded microcode pointer
20 See Entry_u_boot_ucode for full details of the 3 entries involved in this
23 def __init__(self
, image
, etype
, node
):
24 Entry_blob
.__init
__(self
, image
, etype
, node
)
25 self
.elf_fname
= 'u-boot'
26 self
.target_pos
= None
28 def GetDefaultFilename(self
):
29 return 'u-boot-nodtb.bin'
31 def ObtainContents(self
):
32 # Figure out where to put the microcode pointer
33 fname
= tools
.GetInputFilename(self
.elf_fname
)
34 args
= [['nm', fname
], ['grep', '-w', '_dt_ucode_base_size']]
35 out
= (command
.RunPipe(args
, capture
=True, raise_on_error
=False).
38 self
.target_pos
= int(out
[0].split()[0], 16)
39 elif not fdt_util
.GetBool(self
._node
, 'optional-ucode'):
40 self
.Raise('Cannot locate _dt_ucode_base_size symbol in u-boot')
42 return Entry_blob
.ObtainContents(self
)
44 def ProcessContents(self
):
45 # If the image does not need microcode, there is nothing to do
46 if not self
.target_pos
:
49 # Get the position of the microcode
50 ucode_entry
= self
.image
.FindEntryType('u-boot-ucode')
52 self
.Raise('Cannot find microcode region u-boot-ucode')
54 # Check the target pos is in the image. If it is not, then U-Boot is
55 # being linked incorrectly, or is being placed at the wrong position
58 # The image must be set up so that U-Boot is placed at the
59 # flash address to which it is linked. For example, if
60 # CONFIG_SYS_TEXT_BASE is 0xfff00000, and the ROM is 8MB, then
61 # the U-Boot region must start at position 7MB in the image. In this
62 # case the ROM starts at 0xff800000, so the position of the first
63 # entry in the image corresponds to that.
64 if (self
.target_pos
< self
.pos
or
65 self
.target_pos
>= self
.pos
+ self
.size
):
66 self
.Raise('Microcode pointer _dt_ucode_base_size at %08x is '
67 'outside the image ranging from %08x to %08x' %
68 (self
.target_pos
, self
.pos
, self
.pos
+ self
.size
))
70 # Get the microcode, either from u-boot-ucode or u-boot-dtb-with-ucode.
71 # If we have left the microcode in the device tree, then it will be
72 # in the former. If we extracted the microcode from the device tree
73 # and collated it in one place, it will be in the latter.
75 pos
, size
= ucode_entry
.pos
, ucode_entry
.size
77 dtb_entry
= self
.image
.FindEntryType('u-boot-dtb-with-ucode')
79 self
.Raise('Cannot find microcode region u-boot-dtb-with-ucode')
80 pos
= dtb_entry
.pos
+ dtb_entry
.ucode_offset
81 size
= dtb_entry
.ucode_size
83 # Write the microcode position and size into the entry
84 pos_and_size
= struct
.pack('<2L', pos
, size
)
85 self
.target_pos
-= self
.pos
86 self
.data
= (self
.data
[:self
.target_pos
] + pos_and_size
+
87 self
.data
[self
.target_pos
+ 8:])