This package contains the Linux PCI Utilities, version 1.03. Copyright (c) 1998 Martin Mares All files in this package can be freely distributed and used according to the terms of the GNU General Public License, either version 2 or (at your opinion) any newer version. This is the same distribution policy as for the Linux kernel itself -- see /usr/src/linux/COPYING for details. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The Linux PCI Utilities contain various utilities for dealing with the PCI bus in Linux: - lspci: displays detailed information about all PCI busses and devices in the system, replacing the original /proc/pci interface. - setpci: allows to read from and write to PCI device configuration registers. For example, you can adjust the latency timers with it. See manual pages for more details. If you have any bug reports or suggestions, send them to the author. If you want, subscribe to linux-pci@atrey.karlin.mff.cuni.cz (send "subscribe linux-pci Your Full Name" to listproc@atrey.karlin.mff.cuni.cz). Release notes about new versions will be send to the list and problems with the Linux PCI support will be probably discussed there, too. You also might want to look at the pciutils web page containing release notes and other news: http://atrey.karlin.mff.cuni.cz/~mj/pciutils.html. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ TODO: - Better displaying of IRQ's generated by both PCI and CardBus bridges. - Full displaying of CardBus bridge configuration. (Has anyone seen full specs of the CardBus bridge / header type 2?) - Subsystem vendor and device ID?