# translation of util-linux-ng-2.14.1-rc2.po to
# Copyright (C) 2008
# This file is distributed under the same license as the util-linux package.
#
# Ray Wang <wanglei1123@gmail.com>, 2008.
msgid ""
msgstr ""
"Project-Id-Version: util-linux-ng-2.14.1-rc2\n"
"Report-Msgid-Bugs-To: util-linux@vger.kernel.org\n"
"POT-Creation-Date: 2012-06-26 20:51+0200\n"
"PO-Revision-Date: 2008-08-23 23:20+0800\n"
"Last-Translator: Ray Wang <wanglei1123@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: poedit-1.3.9-3.3\n"

#: disk-utils/addpart.c:14
#, c-format
msgid " %s <disk device> <partition number> <start> <length>\n"
msgstr ""

#: disk-utils/addpart.c:52 disk-utils/delpart.c:53 disk-utils/mkfs.minix.c:762
#: disk-utils/partx.c:830 login-utils/last.c:245 login-utils/sulogin.c:216
#: login-utils/sulogin.c:254 login-utils/sulogin.c:524
#: login-utils/sulogin.c:559 misc-utils/findmnt.c:874 sys-utils/eject.c:500
#: sys-utils/eject.c:692 sys-utils/fallocate.c:153 sys-utils/fsfreeze.c:104
#: sys-utils/fstrim.c:142 sys-utils/losetup.c:120 sys-utils/swapon.c:162
#: sys-utils/swapon.c:329 sys-utils/wdctl.c:285 text-utils/rev.c:131
#: text-utils/ul.c:231
#, fuzzy, c-format
msgid "%s: open failed"
msgstr "%s 失败.\n"

#: disk-utils/addpart.c:55 disk-utils/delpart.c:56
#, fuzzy
msgid "invalid partition number argument"
msgstr "查找失败"

#: disk-utils/addpart.c:56
#, fuzzy
msgid "invalid start argument"
msgstr "不能读 inodes"

#: disk-utils/addpart.c:57
#, fuzzy
msgid "invalid length argument"
msgstr "%s 需要一个参数\n"

#: disk-utils/addpart.c:58
#, fuzzy
msgid "failed to add partition"
msgstr "重新读取分区表"

#: disk-utils/blockdev.c:62
msgid "set read-only"
msgstr "设置只读"

#: disk-utils/blockdev.c:69
msgid "set read-write"
msgstr "设置读写"

#: disk-utils/blockdev.c:75
msgid "get read-only"
msgstr "获得只读"

#: disk-utils/blockdev.c:81
msgid "get discard zeroes support status"
msgstr ""

#: disk-utils/blockdev.c:87
#, fuzzy
msgid "get logical block (sector) size"
msgstr "获得段大小"

#: disk-utils/blockdev.c:93
#, fuzzy
msgid "get physical block (sector) size"
msgstr "获得段大小"

#: disk-utils/blockdev.c:99
msgid "get minimum I/O size"
msgstr ""

#: disk-utils/blockdev.c:105
msgid "get optimal I/O size"
msgstr ""

#: disk-utils/blockdev.c:111
#, fuzzy
msgid "get alignment offset in bytes"
msgstr "获得字节大小"

#: disk-utils/blockdev.c:117
msgid "get max sectors per request"
msgstr ""

#: disk-utils/blockdev.c:123
msgid "get blocksize"
msgstr "获得块大小"

#: disk-utils/blockdev.c:130
msgid "set blocksize"
msgstr "设置块大小"

#: disk-utils/blockdev.c:136
#, fuzzy
msgid "get 32-bit sector count (deprecated, use --getsz)"
msgstr "获得 32-bit 段数量"

#: disk-utils/blockdev.c:142
msgid "get size in bytes"
msgstr "获得字节大小"

# fuzzy
#: disk-utils/blockdev.c:149
msgid "set readahead"
msgstr "设置 readahead"

# fuzzy
#: disk-utils/blockdev.c:155
msgid "get readahead"
msgstr "获取 readahead"

# fuzzy
#: disk-utils/blockdev.c:162
msgid "set filesystem readahead"
msgstr "设置文件系统 readahead"

# fuzzy
#: disk-utils/blockdev.c:168
msgid "get filesystem readahead"
msgstr "获取文件系统 readahead"

#: disk-utils/blockdev.c:172
msgid "flush buffers"
msgstr "刷新缓存"

#: disk-utils/blockdev.c:176
msgid "reread partition table"
msgstr "重新读取分区表"

#: disk-utils/blockdev.c:183
#, c-format
msgid ""
"\n"
"Usage:\n"
" %1$s -V\n"
" %1$s --report [devices]\n"
" %1$s [-v|-q] commands devices\n"
"\n"
"Available commands:\n"
msgstr ""

#: disk-utils/blockdev.c:189
#, fuzzy, c-format
msgid " %-25s get size in 512-byte sectors\n"
msgstr "获得512字节的段大小"

#: disk-utils/blockdev.c:232 disk-utils/isosize.c:198 disk-utils/mkfs.c:60
#: disk-utils/mkfs.minix.c:668 misc-utils/ddate.c:183
#, c-format
msgid "%s (%s)\n"
msgstr "%s (%s)\n"

#: disk-utils/blockdev.c:276 disk-utils/blockdev.c:420
#: disk-utils/blockdev.c:445 disk-utils/mkfs.bfs.c:184
#: disk-utils/mkfs.cramfs.c:786 sys-utils/cytune.c:178 sys-utils/cytune.c:404
#: sys-utils/cytune.c:418 sys-utils/cytune.c:434 sys-utils/ldattach.c:293
#, c-format
msgid "cannot open %s"
msgstr ""

#: disk-utils/blockdev.c:311
msgid "could not get device size"
msgstr ""

#: disk-utils/blockdev.c:317
#, fuzzy, c-format
msgid "Unknown command: %s"
msgstr "%s: 未知命令: %s\n"

#: disk-utils/blockdev.c:333
#, fuzzy, c-format
msgid "%s requires an argument"
msgstr "%s 需要一个参数\n"

#: disk-utils/blockdev.c:370
#, c-format
msgid "%s failed.\n"
msgstr "%s 失败.\n"

#: disk-utils/blockdev.c:377
#, c-format
msgid "%s succeeded.\n"
msgstr "%s 成功.\n"

#: disk-utils/blockdev.c:461
#, fuzzy, c-format
msgid "ioctl error on %s"
msgstr "%s: %s ioctl 错误\n"

#: disk-utils/blockdev.c:469
#, c-format
msgid "RO    RA   SSZ   BSZ   StartSec            Size   Device\n"
msgstr "RO    RA   SSZ   BSZ   开始段            大小   设备\n"

#: disk-utils/delpart.c:14
#, fuzzy, c-format
msgid " %s <disk device> <partition number>\n"
msgstr "在 write_block 中查找失败"

#: disk-utils/delpart.c:57
#, fuzzy
msgid "failed to remove partition"
msgstr "重新读取分区表"

#: disk-utils/elvtune.c:56
#, c-format
msgid "usage:\n"
msgstr "用法:\n"

#: disk-utils/elvtune.c:61
#, c-format
msgid "\tNOTE: elvtune only works with 2.4 kernels\n"
msgstr ""

#: disk-utils/elvtune.c:116
#, c-format
msgid "missing blockdevice, use -h for help\n"
msgstr ""

#: disk-utils/elvtune.c:137
#, c-format
msgid ""
"\n"
"elvtune is only useful on older kernels;\n"
"for 2.6 use IO scheduler sysfs tunables instead..\n"
msgstr ""

#: disk-utils/fdformat.c:28
#, c-format
msgid "Formatting ... "
msgstr "正在格式化 ... "

#: disk-utils/fdformat.c:48 disk-utils/fdformat.c:88
#, c-format
msgid "done\n"
msgstr "完成\n"

#: disk-utils/fdformat.c:59
#, c-format
msgid "Verifying ... "
msgstr "正在验证 ... "

#: disk-utils/fdformat.c:62 disk-utils/fdformat.c:155
#: disk-utils/mkfs.cramfs.c:660 term-utils/wall.c:247
#, fuzzy, c-format
msgid "cannot open file %s"
msgstr "%s: 不能打开 %s\n"

#: disk-utils/fdformat.c:71
msgid "Read: "
msgstr "读: "

#: disk-utils/fdformat.c:73
#, c-format
msgid "Problem reading cylinder %d, expected %d, read %d\n"
msgstr "读柱面 %d 时有问题, 期望 %d, 读取 %d\n"

#: disk-utils/fdformat.c:81
#, c-format
msgid ""
"bad data in cyl %d\n"
"Continuing ... "
msgstr ""
"不正确的数据在柱面 %d\n"
"继续 ... "

#: disk-utils/fdformat.c:95
#, fuzzy, c-format
msgid "Usage: %s [options] device\n"
msgstr "用法: %s [ -n ] device\n"

#: disk-utils/fdformat.c:98
#, c-format
msgid ""
"\n"
"Options:\n"
" -n, --no-verify  disable the verification after the format\n"
" -V, --version    output version information and exit\n"
" -h, --help       display this help and exit\n"
"\n"
msgstr ""

#: disk-utils/fdformat.c:131 disk-utils/fsck.c:1490 disk-utils/mkfs.bfs.c:89
#: disk-utils/mkfs.cramfs.c:763 fdisks/sfdisk.c:2633 include/c.h:247
#: misc-utils/cal.c:353 misc-utils/getopt.c:431 misc-utils/kill.c:193
#: misc-utils/logger.c:264 misc-utils/look.c:126 misc-utils/lsblk.c:1338
#: misc-utils/mcookie.c:119 misc-utils/namei.c:466 misc-utils/rename.c:101
#: misc-utils/uuidd.c:580 misc-utils/uuidgen.c:77 misc-utils/whereis.c:466
#: misc-utils/wipefs.c:438 schedutils/ionice.c:171 sys-utils/chcpu.c:313
#: sys-utils/cytune.c:378 sys-utils/dmesg.c:778 sys-utils/hwclock.c:1360
#: sys-utils/lscpu.c:1318 term-utils/agetty.c:672 term-utils/mesg.c:108
#: term-utils/script.c:212 term-utils/scriptreplay.c:172
#: term-utils/setterm.c:812 term-utils/wall.c:133 term-utils/write.c:112
#: text-utils/col.c:208 text-utils/colcrt.c:118 text-utils/colrm.c:174
#: text-utils/column.c:146 text-utils/hexsyntax.c:103 text-utils/rev.c:114
#: text-utils/tailf.c:265 text-utils/ul.c:195
#, c-format
msgid "%s from %s\n"
msgstr ""

#: disk-utils/fdformat.c:146
#, fuzzy, c-format
msgid "cannot stat file %s"
msgstr "%s 失败.\n"

#: disk-utils/fdformat.c:149 disk-utils/partx.c:827 misc-utils/lsblk.c:1046
#: sys-utils/mountpoint.c:107
#, fuzzy, c-format
msgid "%s: not a block device"
msgstr "%s:不是一个块设备\n"

#: disk-utils/fdformat.c:151
#, fuzzy, c-format
msgid "cannot access file %s"
msgstr "%s:不是一个块设备\n"

#: disk-utils/fdformat.c:157
msgid "Could not determine current format type"
msgstr "不能决定当前格式类型"

#: disk-utils/fdformat.c:159
#, c-format
msgid "%s-sided, %d tracks, %d sec/track. Total capacity %d kB.\n"
msgstr "%s-面, %d 磁道, %d 秒/磁道. 总容量 %d kB.\n"

#: disk-utils/fdformat.c:160
msgid "Double"
msgstr ""

#: disk-utils/fdformat.c:160
msgid "Single"
msgstr ""

#: disk-utils/fsck.c:187
#, fuzzy, c-format
msgid "%s is mounted\n"
msgstr "%s 已经挂载.\t"

#: disk-utils/fsck.c:189
#, fuzzy, c-format
msgid "%s is not mounted\n"
msgstr "%s: 不能打开 %s\n"

#: disk-utils/fsck.c:303 lib/path.c:98 lib/path.c:119 lib/path.c:165
#, fuzzy, c-format
msgid "failed to read: %s"
msgstr "不能读 inodes"

#: disk-utils/fsck.c:305 lib/path.c:121
#, c-format
msgid "parse error: %s"
msgstr ""

#: disk-utils/fsck.c:325
#, c-format
msgid "Locking disk %s ... "
msgstr ""

#: disk-utils/fsck.c:335
#, c-format
msgid "(waiting) "
msgstr ""

#. TRANSLATORS: These are followups to "Locking disk...".
#: disk-utils/fsck.c:345
#, fuzzy
msgid "succeeded"
msgstr "%s 成功.\n"

#: disk-utils/fsck.c:345
#, fuzzy
msgid "failed"
msgstr "%s 失败.\n"

#: disk-utils/fsck.c:382
#, fuzzy, c-format
msgid "failed to setup description for %s"
msgstr "根 inode 不是一个目录"

#: disk-utils/fsck.c:408
#, fuzzy, c-format
msgid "%s: parse error at line %d -- ignore"
msgstr "%s: %s ioctl 错误\n"

#: disk-utils/fsck.c:437 disk-utils/fsck.c:439
#, fuzzy, c-format
msgid "%s: failed to parse fstab"
msgstr "不能读 inodes"

#: disk-utils/fsck.c:567 sys-utils/umount.c:217
#, fuzzy, c-format
msgid "%s: not found"
msgstr "%s: 不能打开 %s\n"

#: disk-utils/fsck.c:593 login-utils/login.c:1077 login-utils/vipw.c:212
#: sys-utils/flock.c:314 sys-utils/swapon.c:119 term-utils/script.c:264
#: term-utils/script.c:274
#, fuzzy
msgid "fork failed"
msgstr "查找失败"

#: disk-utils/fsck.c:600
#, fuzzy, c-format
msgid "%s: execute failed"
msgstr "%s 失败.\n"

#: disk-utils/fsck.c:688
msgid "wait: no more child process?!?"
msgstr ""

#: disk-utils/fsck.c:691
#, fuzzy
msgid "waidpid failed"
msgstr "查找失败"

#: disk-utils/fsck.c:709
#, c-format
msgid "Warning... %s for device %s exited with signal %d."
msgstr ""

#: disk-utils/fsck.c:715
#, c-format
msgid "%s %s: status is %x, should never happen."
msgstr ""

#: disk-utils/fsck.c:761
#, c-format
msgid "Finished with %s (exit status %d)\n"
msgstr ""

#: disk-utils/fsck.c:823
#, c-format
msgid "error %d while executing fsck.%s for %s"
msgstr ""

#: disk-utils/fsck.c:892
msgid ""
"Either all or none of the filesystem types passed to -t must be prefixed\n"
"with 'no' or '!'."
msgstr ""

#: disk-utils/fsck.c:1009
#, c-format
msgid ""
"%s: skipping bad line in /etc/fstab: bind mount with nonzero fsck pass number"
msgstr ""

#: disk-utils/fsck.c:1021
#, c-format
msgid "%s: skipping nonexistent device\n"
msgstr ""

#: disk-utils/fsck.c:1026
#, c-format
msgid ""
"%s: nonexistent device (\"nofail\" fstab option may be used to skip this "
"device)\n"
msgstr ""

#: disk-utils/fsck.c:1043
#, fuzzy, c-format
msgid "%s: skipping unknown filesystem type\n"
msgstr "%s: 未知命令: %s\n"

#: disk-utils/fsck.c:1062
#, c-format
msgid "cannot check %s: fsck.%s not found"
msgstr ""

#: disk-utils/fsck.c:1151
#, fuzzy
msgid "failed to allocate iterator"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/fsck.c:1166
msgid "Checking all file systems.\n"
msgstr ""

#: disk-utils/fsck.c:1257
#, c-format
msgid "--waiting-- (pass %d)\n"
msgstr ""

#: disk-utils/fsck.c:1281
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [fsck-options] [fs-options] [filesys ...]\n"
msgstr "用法: %s [ -n ] device\n"

#: disk-utils/fsck.c:1285
msgid ""
"\n"
"Options:\n"
" -A         check all filesystems\n"
" -R         skip root filesystem; useful only with `-A'\n"
" -M         do not check mounted filesystems\n"
" -t <type>  specify filesystem types to be checked;\n"
"              type is allowed to be comma-separated list\n"
" -P         check filesystems in parallel, including root\n"
" -r         report statistics for each device fsck\n"
" -s         serialize fsck operations\n"
" -l         lock the device using flock()\n"
" -N         do not execute, just show what would be done\n"
" -T         do not show the title on startup\n"
" -C <fd>    display progress bar; file descriptor is for GUIs\n"
" -V         explain what is being done\n"
" -?         display this help and exit\n"
"\n"
"See fsck.* commands for fs-options."
msgstr ""

#: disk-utils/fsck.c:1337
#, fuzzy
msgid "too many devices"
msgstr "%s:不是一个块设备\n"

#: disk-utils/fsck.c:1347
#, fuzzy, c-format
msgid "couldn't open %s"
msgstr "%s: 不能打开 %s\n"

#: disk-utils/fsck.c:1349
#, fuzzy
msgid "Is /proc mounted?"
msgstr "%s 已经挂载.\t"

#: disk-utils/fsck.c:1357
#, c-format
msgid "must be root to scan for matching filesystems: %s"
msgstr ""

#: disk-utils/fsck.c:1361
#, c-format
msgid "couldn't find matching filesystem: %s"
msgstr ""

#: disk-utils/fsck.c:1369 disk-utils/fsck.c:1457 sys-utils/eject.c:285
#, fuzzy
msgid "too many arguments"
msgstr "%s 需要一个参数\n"

#: disk-utils/fsck.c:1509
msgid "the -l option can be used with one device only -- ignore"
msgstr ""

#: disk-utils/fsck.cramfs.c:114 misc-utils/whereis.c:141
#, fuzzy, c-format
msgid " %s [options] file\n"
msgstr "用法: %s [ -n ] device\n"

#: disk-utils/fsck.cramfs.c:116
msgid " -x, --destination <dir>  extract into directory\n"
msgstr ""

#: disk-utils/fsck.cramfs.c:117
msgid " -v, --verbose            be more verbose\n"
msgstr ""

#: disk-utils/fsck.cramfs.c:142
#, fuzzy, c-format
msgid "stat failed: %s"
msgstr "%s 失败.\n"

#: disk-utils/fsck.cramfs.c:146 disk-utils/fsck.cramfs.c:498
#: sys-utils/rtcwake.c:119 sys-utils/rtcwake.c:279 sys-utils/rtcwake.c:517
#: term-utils/script.c:233 term-utils/script.c:560
#, fuzzy, c-format
msgid "open failed: %s"
msgstr "查找失败"

#: disk-utils/fsck.cramfs.c:152
#, c-format
msgid "ioctl failed: unable to determine device size: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:158
#, fuzzy, c-format
msgid "not a block device or file: %s"
msgstr "%s:不是一个块设备\n"

#: disk-utils/fsck.cramfs.c:161 disk-utils/fsck.cramfs.c:195
msgid "file length too short"
msgstr ""

#: disk-utils/fsck.cramfs.c:165 disk-utils/fsck.cramfs.c:171
#: disk-utils/fsck.cramfs.c:227 disk-utils/fsck.cramfs.c:244
#, fuzzy, c-format
msgid "read failed: %s"
msgstr "查找失败"

#: disk-utils/fsck.cramfs.c:175 disk-utils/fsck.cramfs.c:177
msgid "superblock magic not found"
msgstr ""

#: disk-utils/fsck.cramfs.c:180
#, c-format
msgid "cramfs endianness is %s\n"
msgstr ""

#: disk-utils/fsck.cramfs.c:181
msgid "big"
msgstr ""

#: disk-utils/fsck.cramfs.c:181
msgid "little"
msgstr ""

# fuzzy
#: disk-utils/fsck.cramfs.c:185
#, fuzzy
msgid "unsupported filesystem features"
msgstr "设置文件系统 readahead"

#: disk-utils/fsck.cramfs.c:188
#, c-format
msgid "superblock size (%d) too small"
msgstr ""

#: disk-utils/fsck.cramfs.c:193
msgid "zero file count"
msgstr ""

#: disk-utils/fsck.cramfs.c:198
#, c-format
msgid "warning: file extends past end of filesystem\n"
msgstr ""

#: disk-utils/fsck.cramfs.c:200
#, c-format
msgid "warning: old cramfs format\n"
msgstr ""

#: disk-utils/fsck.cramfs.c:212
msgid "unable to test CRC: old cramfs format"
msgstr ""

#: disk-utils/fsck.cramfs.c:263
#, fuzzy
msgid "crc error"
msgstr "内部错误"

#: disk-utils/fsck.cramfs.c:324
#, fuzzy
msgid "root inode is not directory"
msgstr "根 inode 不是一个目录"

#: disk-utils/fsck.cramfs.c:328
#, c-format
msgid "bad root offset (%lu)"
msgstr ""

#: disk-utils/fsck.cramfs.c:346
msgid "data block too large"
msgstr ""

#: disk-utils/fsck.cramfs.c:350
#, c-format
msgid "decompression error %p(%d): %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:376
#, c-format
msgid "  hole at %ld (%zd)\n"
msgstr ""

#: disk-utils/fsck.cramfs.c:383 disk-utils/fsck.cramfs.c:537
#, c-format
msgid "  uncompressing block at %ld to %ld (%ld)\n"
msgstr ""

#: disk-utils/fsck.cramfs.c:390
#, c-format
msgid "non-block (%ld) bytes"
msgstr ""

#: disk-utils/fsck.cramfs.c:394
#, c-format
msgid "non-size (%ld vs %ld) bytes"
msgstr ""

#: disk-utils/fsck.cramfs.c:400
#, c-format
msgid "write failed: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:412
#, c-format
msgid "lchown failed: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:416
#, c-format
msgid "chown failed: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:421
#, c-format
msgid "utime failed: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:433
#, c-format
msgid "directory inode has zero offset and non-zero size: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:448
#, c-format
msgid "mkdir failed: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:464
msgid "filename length is zero"
msgstr ""

#: disk-utils/fsck.cramfs.c:466
msgid "bad filename length"
msgstr ""

#: disk-utils/fsck.cramfs.c:472
msgid "bad inode offset"
msgstr ""

#: disk-utils/fsck.cramfs.c:487
msgid "file inode has zero offset and non-zero size"
msgstr ""

#: disk-utils/fsck.cramfs.c:490
msgid "file inode has zero size and non-zero offset"
msgstr ""

#: disk-utils/fsck.cramfs.c:518
msgid "symbolic link has zero offset"
msgstr ""

#: disk-utils/fsck.cramfs.c:520
msgid "symbolic link has zero size"
msgstr ""

#: disk-utils/fsck.cramfs.c:529
#, c-format
msgid "size error in symlink: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:543
#, fuzzy, c-format
msgid "symlink failed: %s"
msgstr "查找失败"

#: disk-utils/fsck.cramfs.c:556
#, c-format
msgid "special file has non-zero offset: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:566
#, c-format
msgid "fifo has non-zero size: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:572
#, c-format
msgid "socket has non-zero size: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:575
#, c-format
msgid "bogus mode: %s (%o)"
msgstr ""

#: disk-utils/fsck.cramfs.c:584
#, c-format
msgid "mknod failed: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:616
#, c-format
msgid "directory data start (%ld) < sizeof(struct cramfs_super) + start (%ld)"
msgstr ""

#: disk-utils/fsck.cramfs.c:620
#, c-format
msgid "directory data end (%ld) != file data start (%ld)"
msgstr ""

#: disk-utils/fsck.cramfs.c:625
msgid "invalid file data offset"
msgstr ""

#: disk-utils/fsck.cramfs.c:669
msgid "compiled without -x support"
msgstr ""

#: disk-utils/fsck.cramfs.c:689 fdisks/sfdisk.c:2859
#, c-format
msgid "%s: OK\n"
msgstr ""

#: disk-utils/fsck.minix.c:194 disk-utils/swaplabel.c:159
#: misc-utils/wipefs.c:361 sys-utils/tunelp.c:80
#, fuzzy, c-format
msgid " %s [options] <device>\n"
msgstr "用法: %s [ -n ] device\n"

#: disk-utils/fsck.minix.c:196
msgid " -l  list all filenames\n"
msgstr ""

#: disk-utils/fsck.minix.c:197
msgid " -a  automatic repair\n"
msgstr ""

#: disk-utils/fsck.minix.c:198
msgid " -r  interactive repair\n"
msgstr ""

#: disk-utils/fsck.minix.c:199
msgid " -v  be verbose\n"
msgstr ""

#: disk-utils/fsck.minix.c:200
msgid " -s  output super-block information\n"
msgstr ""

#: disk-utils/fsck.minix.c:201
msgid " -m  activate mode not cleared warnings\n"
msgstr ""

#: disk-utils/fsck.minix.c:202
msgid " -f  force check\n"
msgstr ""

#. TRANSLATORS: these yes no questions uses rpmatch(), and should be
#. * translated.
#: disk-utils/fsck.minix.c:261
#, c-format
msgid "%s (y/n)? "
msgstr ""

#: disk-utils/fsck.minix.c:261
#, c-format
msgid "%s (n/y)? "
msgstr ""

#: disk-utils/fsck.minix.c:278
#, c-format
msgid "y\n"
msgstr ""

#: disk-utils/fsck.minix.c:280
#, c-format
msgid "n\n"
msgstr ""

#: disk-utils/fsck.minix.c:296
#, c-format
msgid "%s is mounted.\t "
msgstr "%s 已经挂载.\t"

#: disk-utils/fsck.minix.c:298
msgid "Do you really want to continue"
msgstr "你确认要继续"

#: disk-utils/fsck.minix.c:302
#, c-format
msgid "check aborted.\n"
msgstr "检查失败.\n"

#: disk-utils/fsck.minix.c:318 disk-utils/fsck.minix.c:339
#, c-format
msgid "Zone nr < FIRSTZONE in file `%s'."
msgstr ""

#: disk-utils/fsck.minix.c:321 disk-utils/fsck.minix.c:342
#, c-format
msgid "Zone nr >= ZONES in file `%s'."
msgstr ""

#: disk-utils/fsck.minix.c:325 disk-utils/fsck.minix.c:346
msgid "Remove block"
msgstr "删除块"

#: disk-utils/fsck.minix.c:362
#, c-format
msgid "Read error: unable to seek to block in file '%s'\n"
msgstr "读取错误: 不能在文件 '%s' 中查找到该块\n"

#: disk-utils/fsck.minix.c:368
#, c-format
msgid "Read error: bad block in file '%s'\n"
msgstr "读取错误: 文件 '%s' 中有坏块\n"

#: disk-utils/fsck.minix.c:380
#, c-format
msgid ""
"Internal error: trying to write bad block\n"
"Write request ignored\n"
msgstr ""
"内部错误: 试图写坏块\n"
"写请求忽略\n"

#: disk-utils/fsck.minix.c:386
msgid "seek failed in write_block"
msgstr "在 write_block 中查找失败"

#: disk-utils/fsck.minix.c:389
#, c-format
msgid "Write error: bad block in file '%s'\n"
msgstr "写入错误: 文件 '%s' 中有坏块\n"

#: disk-utils/fsck.minix.c:501
msgid "seek failed in write_super_block"
msgstr "在 write_super_block 中查找失败"

#: disk-utils/fsck.minix.c:503
msgid "unable to write super-block"
msgstr "不能写超级块"

#: disk-utils/fsck.minix.c:515
#, fuzzy
msgid "Unable to write inode map"
msgstr "不能写 inode map"

#: disk-utils/fsck.minix.c:518
msgid "Unable to write zone map"
msgstr "不能写 zone map"

#: disk-utils/fsck.minix.c:521
msgid "Unable to write inodes"
msgstr "不能写 inodes"

#: disk-utils/fsck.minix.c:549
msgid "seek failed"
msgstr "查找失败"

#: disk-utils/fsck.minix.c:553
#, fuzzy
msgid "unable to alloc buffer for superblock"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/fsck.minix.c:556
msgid "unable to read super block"
msgstr "不能读超级块"

#: disk-utils/fsck.minix.c:574
msgid "bad magic number in super-block"
msgstr ""

#: disk-utils/fsck.minix.c:576
msgid "Only 1k blocks/zones supported"
msgstr "只支持 1k 块/区"

#: disk-utils/fsck.minix.c:578
msgid "bad s_imap_blocks field in super-block"
msgstr "不正确的 s_imap_blocks 域在超级块中"

#: disk-utils/fsck.minix.c:581
msgid "bad s_zmap_blocks field in super-block"
msgstr "不正确的 s_zmap_blocks 域在超级块中"

#: disk-utils/fsck.minix.c:597
msgid "Unable to allocate buffer for inode map"
msgstr "不能为 inode map 分配缓冲区"

#: disk-utils/fsck.minix.c:600
msgid "Unable to allocate buffer for zone map"
msgstr "不能为 zone map 分配缓冲区"

#: disk-utils/fsck.minix.c:603
msgid "Unable to allocate buffer for inodes"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/fsck.minix.c:606
msgid "Unable to allocate buffer for inode count"
msgstr "不能为 inode count 分配缓冲区"

#: disk-utils/fsck.minix.c:609
msgid "Unable to allocate buffer for zone count"
msgstr "不能为 zone count 分配缓冲区"

#: disk-utils/fsck.minix.c:613
msgid "Unable to read inode map"
msgstr "不能读 inode map"

#: disk-utils/fsck.minix.c:617
msgid "Unable to read zone map"
msgstr "不能读 zone map"

#: disk-utils/fsck.minix.c:621
msgid "Unable to read inodes"
msgstr "不能读 inodes"

#: disk-utils/fsck.minix.c:623
#, c-format
msgid "Warning: Firstzone != Norm_firstzone\n"
msgstr "警告: Firstzone != Norm_firstzone\n"

#: disk-utils/fsck.minix.c:628
#, c-format
msgid "%ld inodes\n"
msgstr "%ld inodes\n"

#: disk-utils/fsck.minix.c:629
#, c-format
msgid "%ld blocks\n"
msgstr "%ld 块\n"

#: disk-utils/fsck.minix.c:630 disk-utils/mkfs.minix.c:546
#, c-format
msgid "Firstdatazone=%ld (%ld)\n"
msgstr "Firstdatazone=%ld (%ld)\n"

#: disk-utils/fsck.minix.c:631 disk-utils/mkfs.minix.c:547
#, c-format
msgid "Zonesize=%d\n"
msgstr "Zonesize=%d\n"

#: disk-utils/fsck.minix.c:632
#, c-format
msgid "Maxsize=%ld\n"
msgstr "Maxsize=%ld\n"

#: disk-utils/fsck.minix.c:633
#, c-format
msgid "Filesystem state=%d\n"
msgstr "Filesystem state=%d\n"

#: disk-utils/fsck.minix.c:634
#, fuzzy, c-format
msgid ""
"namelen=%zd\n"
"\n"
msgstr ""
"namelen=%d\n"
"\n"

#: disk-utils/fsck.minix.c:649 disk-utils/fsck.minix.c:699
#, c-format
msgid "Inode %d marked unused, but used for file '%s'\n"
msgstr "Inode %d 标记为未使用, 但用于文件 '%s'\n"

#: disk-utils/fsck.minix.c:652 disk-utils/fsck.minix.c:702
msgid "Mark in use"
msgstr "标记为已使用"

#: disk-utils/fsck.minix.c:674 disk-utils/fsck.minix.c:722
#, c-format
msgid "The file `%s' has mode %05o\n"
msgstr "文件 `%s' 的模式 %05o\n"

#: disk-utils/fsck.minix.c:681 disk-utils/fsck.minix.c:728
#, c-format
msgid "Warning: inode count too big.\n"
msgstr "警告: inode 计数太大.\n"

#: disk-utils/fsck.minix.c:740 disk-utils/fsck.minix.c:748
msgid "root inode isn't a directory"
msgstr "根 inode 不是一个目录"

#: disk-utils/fsck.minix.c:760 disk-utils/fsck.minix.c:791
#, c-format
msgid "Block has been used before. Now in file `%s'."
msgstr "块已经被使用, 现在在文件 `%s' 中."

#: disk-utils/fsck.minix.c:762 disk-utils/fsck.minix.c:793
#: disk-utils/fsck.minix.c:1114 disk-utils/fsck.minix.c:1123
#: disk-utils/fsck.minix.c:1170 disk-utils/fsck.minix.c:1179
msgid "Clear"
msgstr "清除"

#: disk-utils/fsck.minix.c:772 disk-utils/fsck.minix.c:803
#, c-format
msgid "Block %d in file `%s' is marked not in use."
msgstr "文件中块 %d `%s' 标记为没有使用."

#: disk-utils/fsck.minix.c:774 disk-utils/fsck.minix.c:805
msgid "Correct"
msgstr "正确"

#: disk-utils/fsck.minix.c:944 disk-utils/fsck.minix.c:1012
#, c-format
msgid "The directory '%s' contains a bad inode number for file '%.*s'."
msgstr "目录 '%s' 包含了一个不正确的 inode number 文件 '%.*s'. "

#: disk-utils/fsck.minix.c:946 disk-utils/fsck.minix.c:1014
msgid " Remove"
msgstr " 删除"

#: disk-utils/fsck.minix.c:960 disk-utils/fsck.minix.c:1028
#, c-format
msgid "%s: bad directory: '.' isn't first\n"
msgstr "%s: 不正确的目录: '.' 不是第一个\n"

#: disk-utils/fsck.minix.c:969 disk-utils/fsck.minix.c:1037
#, fuzzy, c-format
msgid "%s: bad directory: '..' isn't second\n"
msgstr "%s: 不正确的目录: '.' 不是第一个\n"

#: disk-utils/fsck.minix.c:1071 disk-utils/fsck.minix.c:1088
msgid "internal error"
msgstr "内部错误"

#: disk-utils/fsck.minix.c:1074 disk-utils/fsck.minix.c:1091
#, c-format
msgid "%s: bad directory: size < 32"
msgstr "%s: 不正确的目录: 大小 < 32"

#: disk-utils/fsck.minix.c:1103
msgid "seek failed in bad_zone"
msgstr ""

#: disk-utils/fsck.minix.c:1113 disk-utils/fsck.minix.c:1169
#, c-format
msgid "Inode %lu mode not cleared."
msgstr ""

#: disk-utils/fsck.minix.c:1122 disk-utils/fsck.minix.c:1178
#, c-format
msgid "Inode %lu not used, marked used in the bitmap."
msgstr ""

#: disk-utils/fsck.minix.c:1128 disk-utils/fsck.minix.c:1184
#, c-format
msgid "Inode %lu used, marked unused in the bitmap."
msgstr ""

#: disk-utils/fsck.minix.c:1129 disk-utils/fsck.minix.c:1185
msgid "Set"
msgstr ""

#: disk-utils/fsck.minix.c:1133 disk-utils/fsck.minix.c:1189
#, c-format
msgid "Inode %lu (mode = %07o), i_nlinks=%d, counted=%d."
msgstr ""

#: disk-utils/fsck.minix.c:1136 disk-utils/fsck.minix.c:1192
msgid "Set i_nlinks to count"
msgstr ""

#: disk-utils/fsck.minix.c:1148 disk-utils/fsck.minix.c:1204
#, c-format
msgid "Zone %lu: marked in use, no file uses it."
msgstr ""

#: disk-utils/fsck.minix.c:1150 disk-utils/fsck.minix.c:1206
msgid "Unmark"
msgstr ""

#: disk-utils/fsck.minix.c:1155 disk-utils/fsck.minix.c:1211
#, c-format
msgid "Zone %lu: in use, counted=%d\n"
msgstr ""

#: disk-utils/fsck.minix.c:1158 disk-utils/fsck.minix.c:1214
#, c-format
msgid "Zone %lu: not in use, counted=%d\n"
msgstr ""

#: disk-utils/fsck.minix.c:1255
msgid "bad inode size"
msgstr ""

#: disk-utils/fsck.minix.c:1257
msgid "bad v2 inode size"
msgstr ""

#: disk-utils/fsck.minix.c:1301
msgid "need terminal for interactive repairs"
msgstr ""

#: disk-utils/fsck.minix.c:1305
#, fuzzy, c-format
msgid "unable to open '%s': %s"
msgstr "不能读 inodes"

#: disk-utils/fsck.minix.c:1316
#, c-format
msgid "%s is clean, no check.\n"
msgstr ""

#: disk-utils/fsck.minix.c:1319
#, c-format
msgid "Forcing filesystem check on %s.\n"
msgstr ""

#: disk-utils/fsck.minix.c:1321
#, c-format
msgid "Filesystem on %s is dirty, needs checking.\n"
msgstr ""

#: disk-utils/fsck.minix.c:1353
#, c-format
msgid ""
"\n"
"%6ld inodes used (%ld%%)\n"
msgstr ""

#: disk-utils/fsck.minix.c:1359
#, c-format
msgid "%6ld zones used (%ld%%)\n"
msgstr ""

#: disk-utils/fsck.minix.c:1361
#, c-format
msgid ""
"\n"
"%6d regular files\n"
"%6d directories\n"
"%6d character device files\n"
"%6d block device files\n"
"%6d links\n"
"%6d symbolic links\n"
"------\n"
"%6d files\n"
msgstr ""

#: disk-utils/fsck.minix.c:1375
#, c-format
msgid ""
"----------------------------\n"
"FILE SYSTEM HAS BEEN CHANGED\n"
"----------------------------\n"
msgstr ""

#: disk-utils/isosize.c:126
#, fuzzy, c-format
msgid "failed to open %s"
msgstr "不能读 inodes"

#: disk-utils/isosize.c:129
#, fuzzy, c-format
msgid "seek error on %s"
msgstr "%s: %s ioctl 错误\n"

#: disk-utils/isosize.c:132
#, fuzzy, c-format
msgid "read error on %s"
msgstr "%s: %s ioctl 错误\n"

#: disk-utils/isosize.c:139
#, c-format
msgid "sector count: %d, sector size: %d\n"
msgstr ""

#: disk-utils/isosize.c:156
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options] iso9660_image_file\n"
msgstr "用法: %s [ -n ] device\n"

#: disk-utils/isosize.c:160
#, c-format
msgid ""
"\n"
"Options:\n"
" -d, --divisor=NUM      divide bytes NUM\n"
" -x, --sectors          show sector count and size\n"
" -V, --version          output version information and exit\n"
" -H, --help             display this help and exit\n"
"\n"
msgstr ""

#: disk-utils/isosize.c:192
msgid "invalid divisor argument"
msgstr ""

#: disk-utils/mkfs.bfs.c:71
#, fuzzy, c-format
msgid "Usage: %s [options] device [block-count]\n"
msgstr "用法: %s [ -n ] device\n"

#: disk-utils/mkfs.bfs.c:73
#, c-format
msgid ""
"\n"
"Options:\n"
" -N, --inodes=NUM    specify desired number of inodes\n"
" -V, --vname=NAME    specify volume name\n"
" -F, --fname=NAME    specify file system name\n"
" -v, --verbose       explain what is being done\n"
" -c                  this option is silently ignored\n"
" -l                  this option is silently ignored\n"
" -V, --version       output version information and exit\n"
"                     -V as version must be only option\n"
" -h, --help          display this help and exit\n"
"\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:136
msgid "invalid number of inodes"
msgstr ""

#: disk-utils/mkfs.bfs.c:142
msgid "volume name too long"
msgstr ""

#: disk-utils/mkfs.bfs.c:149
msgid "fsname name too long"
msgstr ""

#: disk-utils/mkfs.bfs.c:177
#, c-format
msgid "cannot stat device %s"
msgstr ""

#: disk-utils/mkfs.bfs.c:180
#, c-format
msgid "%s is not a block special device"
msgstr ""

#: disk-utils/mkfs.bfs.c:188
msgid "invalid block-count"
msgstr ""

#: disk-utils/mkfs.bfs.c:194
#, c-format
msgid "cannot get size of %s"
msgstr ""

#: disk-utils/mkfs.bfs.c:199
#, c-format
msgid "blocks argument too large, max is %llu"
msgstr ""

#: disk-utils/mkfs.bfs.c:214
msgid "too many inodes - max is 512"
msgstr ""

#: disk-utils/mkfs.bfs.c:224
#, c-format
msgid "not enough space, need at least %llu blocks"
msgstr ""

#: disk-utils/mkfs.bfs.c:236 fdisks/fdisk.c:1602
#, c-format
msgid "Device: %s\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:237
#, c-format
msgid "Volume: <%-6s>\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:238
#, c-format
msgid "FSname: <%-6s>\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:239
#, c-format
msgid "BlockSize: %d\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:241
#, c-format
msgid "Inodes: %lu (in 1 block)\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:244
#, c-format
msgid "Inodes: %lu (in %llu blocks)\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:246
#, c-format
msgid "Blocks: %lld\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:247
#, c-format
msgid "Inode end: %d, Data end: %d\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:252
msgid "error writing superblock"
msgstr ""

#: disk-utils/mkfs.bfs.c:272
msgid "error writing root inode"
msgstr ""

#: disk-utils/mkfs.bfs.c:277
msgid "error writing inode"
msgstr ""

#: disk-utils/mkfs.bfs.c:280
msgid "seek error"
msgstr ""

#: disk-utils/mkfs.bfs.c:286
msgid "error writing . entry"
msgstr ""

#: disk-utils/mkfs.bfs.c:290
msgid "error writing .. entry"
msgstr ""

#: disk-utils/mkfs.bfs.c:293
#, c-format
msgid "error closing %s"
msgstr ""

#: disk-utils/mkfs.c:39
#, fuzzy, c-format
msgid "Usage: %s [options] [-t type fs-options] device [size]\n"
msgstr "用法: %s [ -n ] device\n"

#: disk-utils/mkfs.c:42
#, c-format
msgid ""
"\n"
"Options:\n"
" -t, --type=TYPE  file system type, when undefined ext2 is used\n"
"     fs-options   parameters to real file system builder\n"
"     device       path to a device\n"
"     size         number of blocks on the device\n"
" -V, --verbose    explain what is done\n"
"                  defining -V more than once will cause a dry-run\n"
" -V, --version    output version information and exit\n"
"                  -V as version must be only option\n"
" -h, --help       display this help and exit\n"
msgstr ""

#: disk-utils/mkfs.c:53
#, c-format
msgid ""
"\n"
"For more information see mkfs(8).\n"
msgstr ""

#: disk-utils/mkfs.c:131
#, c-format
msgid "mkfs (%s)\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:122
#, c-format
msgid ""
"usage: %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n "
"name] dirname outfile\n"
" -h         print this help\n"
" -v         be verbose\n"
" -E         make all warnings errors (non-zero exit status)\n"
" -b blksize use this blocksize, must equal page size\n"
" -e edition set edition number (part of fsid)\n"
" -N endian  set cramfs endianness (big|little|host), default host\n"
" -i file    insert a file image into the filesystem (requires >= 2.4.0)\n"
" -n name    set name of cramfs filesystem\n"
" -p         pad by %d bytes for boot code\n"
" -s         sort directory entries (old option, ignored)\n"
" -z         make explicit holes (requires >= 2.3.39)\n"
" dirname    root of the filesystem to be compressed\n"
" outfile    output file\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:295
#, fuzzy, c-format
msgid "could not read directory %s"
msgstr "根 inode 不是一个目录"

#: disk-utils/mkfs.cramfs.c:320
#, c-format
msgid ""
"Very long (%zu bytes) filename `%s' found.\n"
" Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile.  Exiting."
msgstr ""

#: disk-utils/mkfs.cramfs.c:442
msgid "filesystem too big.  Exiting."
msgstr ""

#: disk-utils/mkfs.cramfs.c:601
#, c-format
msgid "AIEEE: block \"compressed\" to > 2*blocklength (%ld)\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:620
#, c-format
msgid "%6.2f%% (%+ld bytes)\t%s\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:665
#, fuzzy, c-format
msgid "cannot close file %s"
msgstr "%s: 不能打开 %s\n"

#: disk-utils/mkfs.cramfs.c:726
#, fuzzy
msgid "invalid blocksize argument"
msgstr "%s:不是一个块设备\n"

#: disk-utils/mkfs.cramfs.c:732
#, fuzzy
msgid "edition number argument failed"
msgstr "查找失败"

#: disk-utils/mkfs.cramfs.c:742
msgid "invalid endianness given. Must be 'big', 'little', or 'host'"
msgstr ""

#: disk-utils/mkfs.cramfs.c:748 disk-utils/mkfs.cramfs.c:783
#, fuzzy, c-format
msgid "cannot stat %s"
msgstr "%s: 不能打开 %s\n"

#: disk-utils/mkfs.cramfs.c:804
#, c-format
msgid ""
"warning: guestimate of required size (upper bound) is %lldMB, but maximum "
"image size is %uMB.  We might die prematurely."
msgstr ""

#: disk-utils/mkfs.cramfs.c:828
msgid "ROM image map"
msgstr ""

#: disk-utils/mkfs.cramfs.c:840
#, c-format
msgid "Including: %s\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:846
#, c-format
msgid "Directory data: %zd bytes\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:854
#, c-format
msgid "Everything: %zd kilobytes\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:859
#, c-format
msgid "Super block: %zd bytes\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:866
#, c-format
msgid "CRC: %x\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:871
#, c-format
msgid "not enough space allocated for ROM image (%lld allocated, %zu used)"
msgstr ""

#: disk-utils/mkfs.cramfs.c:878
msgid "ROM image"
msgstr ""

#: disk-utils/mkfs.cramfs.c:880
#, c-format
msgid "ROM image write failed (%zd %zd)"
msgstr ""

#: disk-utils/mkfs.cramfs.c:890
#, fuzzy
msgid "warning: filenames truncated to 255 bytes."
msgstr "不能读 inodes"

#: disk-utils/mkfs.cramfs.c:892
msgid "warning: files were skipped due to errors."
msgstr ""

#: disk-utils/mkfs.cramfs.c:894
#, c-format
msgid "warning: file sizes truncated to %luMB (minus 1 byte)."
msgstr ""

#: disk-utils/mkfs.cramfs.c:898
#, c-format
msgid "warning: uids truncated to %u bits.  (This may be a security concern.)"
msgstr ""

#: disk-utils/mkfs.cramfs.c:901
#, c-format
msgid "warning: gids truncated to %u bits.  (This may be a security concern.)"
msgstr ""

#: disk-utils/mkfs.cramfs.c:904
#, c-format
msgid ""
"WARNING: device numbers truncated to %u bits.  This almost certainly means\n"
"that some device files will be wrong."
msgstr ""

#: disk-utils/mkfs.minix.c:149
#, c-format
msgid "Usage: %s [-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
msgstr ""

#: disk-utils/mkfs.minix.c:171
#, c-format
msgid "%s is mounted; will not make a filesystem here!"
msgstr ""

#: disk-utils/mkfs.minix.c:197
#, fuzzy, c-format
msgid "%s: seek to boot block failed  in write_tables"
msgstr "在 write_block 中查找失败"

#: disk-utils/mkfs.minix.c:200
#, fuzzy, c-format
msgid "%s: unable to clear boot sector"
msgstr "不能读超级块"

#: disk-utils/mkfs.minix.c:202
#, fuzzy, c-format
msgid "%s: seek failed in write_tables"
msgstr "在 write_block 中查找失败"

#: disk-utils/mkfs.minix.c:205
#, fuzzy, c-format
msgid "%s: unable to write super-block"
msgstr "不能写超级块"

#: disk-utils/mkfs.minix.c:208
#, fuzzy, c-format
msgid "%s: unable to write inode map"
msgstr "不能写 inode map"

#: disk-utils/mkfs.minix.c:211
#, fuzzy, c-format
msgid "%s: unable to write zone map"
msgstr "不能写 zone map"

#: disk-utils/mkfs.minix.c:214
#, fuzzy, c-format
msgid "%s: unable to write inodes"
msgstr "不能写 inodes"

#: disk-utils/mkfs.minix.c:219
#, fuzzy, c-format
msgid "%s: seek failed in write_block"
msgstr "在 write_block 中查找失败"

#: disk-utils/mkfs.minix.c:222
#, fuzzy, c-format
msgid "%s: write failed in write_block"
msgstr "在 write_block 中查找失败"

#: disk-utils/mkfs.minix.c:231 disk-utils/mkfs.minix.c:306
#: disk-utils/mkfs.minix.c:355
#, fuzzy, c-format
msgid "%s: too many bad blocks"
msgstr "%s:不是一个块设备\n"

#: disk-utils/mkfs.minix.c:239
#, c-format
msgid "%s: not enough good blocks"
msgstr ""

#: disk-utils/mkfs.minix.c:485
#, fuzzy, c-format
msgid "%s: unable to alloc buffer for superblock"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/mkfs.minix.c:531
#, fuzzy, c-format
msgid "%s: unable to allocate buffers for maps"
msgstr "不能为 zone map 分配缓冲区"

#: disk-utils/mkfs.minix.c:541
#, fuzzy, c-format
msgid "%s: unable to allocate buffer for inodes"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/mkfs.minix.c:544
#, fuzzy, c-format
msgid "%lu inodes\n"
msgstr "%ld inodes\n"

#: disk-utils/mkfs.minix.c:545
#, fuzzy, c-format
msgid "%lu blocks\n"
msgstr "%ld 块\n"

#: disk-utils/mkfs.minix.c:548
#, c-format
msgid ""
"Maxsize=%ld\n"
"\n"
msgstr ""

#: disk-utils/mkfs.minix.c:561
#, fuzzy, c-format
msgid "%s: seek failed during testing of blocks"
msgstr "在 write_block 中查找失败"

#: disk-utils/mkfs.minix.c:568
#, c-format
msgid "Weird values in do_check: probably bugs\n"
msgstr ""

#: disk-utils/mkfs.minix.c:601
#, fuzzy, c-format
msgid "%s: seek failed in check_blocks"
msgstr "在 write_block 中查找失败"

#: disk-utils/mkfs.minix.c:611
#, c-format
msgid "%s: bad blocks before data-area: cannot make fs"
msgstr ""

#: disk-utils/mkfs.minix.c:618 disk-utils/mkfs.minix.c:644
#, c-format
msgid "%d bad blocks\n"
msgstr ""

#: disk-utils/mkfs.minix.c:620 disk-utils/mkfs.minix.c:646
#, c-format
msgid "one bad block\n"
msgstr ""

#: disk-utils/mkfs.minix.c:629
#, fuzzy, c-format
msgid "%s: can't open file of bad blocks"
msgstr "%s: 不能打开 %s\n"

#: disk-utils/mkfs.minix.c:634
#, c-format
msgid "badblock number input error on line %d\n"
msgstr ""

#: disk-utils/mkfs.minix.c:635
#, fuzzy, c-format
msgid "%s: cannot read badblocks file"
msgstr "%s: 不能打开 %s\n"

#: disk-utils/mkfs.minix.c:673 disk-utils/mkfs.minix.c:675
#, fuzzy, c-format
msgid "%s: bad inode size"
msgstr "%s: 不正确的目录: 大小 < 32"

#: disk-utils/mkfs.minix.c:725
#, c-format
msgid "strtol error: number of blocks not specified"
msgstr ""

#: disk-utils/mkfs.minix.c:755 disk-utils/partx.c:769 sys-utils/fstrim.c:136
#: sys-utils/swapon.c:298
#, fuzzy, c-format
msgid "%s: stat failed"
msgstr "%s 失败.\n"

#: disk-utils/mkfs.minix.c:771
#, c-format
msgid "%s: device is misaligned"
msgstr ""

#: disk-utils/mkfs.minix.c:774
#, c-format
msgid "block size smaller than physical sector size of %s"
msgstr ""

#: disk-utils/mkfs.minix.c:778
#, c-format
msgid "cannot determine size of %s"
msgstr ""

#: disk-utils/mkfs.minix.c:787
#, c-format
msgid "will not try to make filesystem on '%s'"
msgstr ""

#: disk-utils/mkfs.minix.c:789
#, c-format
msgid "%s: number of blocks too small"
msgstr ""

#: disk-utils/mkswap.c:162
#, c-format
msgid "Bad user-specified page size %u"
msgstr ""

#: disk-utils/mkswap.c:168
#, c-format
msgid "Using user-specified page size %d, instead of the system value %d"
msgstr ""

#: disk-utils/mkswap.c:191
msgid "Bad swap header size, no label written."
msgstr ""

#: disk-utils/mkswap.c:201
msgid "Label was truncated."
msgstr ""

#: disk-utils/mkswap.c:207
#, c-format
msgid "no label, "
msgstr ""

#: disk-utils/mkswap.c:215
#, c-format
msgid "no uuid\n"
msgstr ""

#: disk-utils/mkswap.c:280
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options] device [size]\n"
msgstr "用法: %s [ -n ] device\n"

#: disk-utils/mkswap.c:285
#, c-format
msgid ""
"\n"
"Options:\n"
" -c, --check               check bad blocks before creating the swap area\n"
" -f, --force               allow swap size area be larger than device\n"
" -p, --pagesize SIZE       specify page size in bytes\n"
" -L, --label LABEL         specify label\n"
" -v, --swapversion NUM     specify swap-space version number\n"
" -U, --uuid UUID           specify the uuid to use\n"
" -V, --version             output version information and exit\n"
" -h, --help                display this help and exit\n"
"\n"
msgstr ""

#: disk-utils/mkswap.c:304
msgid "too many bad pages"
msgstr ""

#: disk-utils/mkswap.c:321
msgid "seek failed in check_blocks"
msgstr ""

#: disk-utils/mkswap.c:327
#, c-format
msgid "one bad page\n"
msgstr ""

#: disk-utils/mkswap.c:329
#, c-format
msgid "%lu bad pages\n"
msgstr ""

#: disk-utils/mkswap.c:358
#, fuzzy
msgid "unable to alloc new libblkid probe"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/mkswap.c:360
#, fuzzy
msgid "unable to assign device to libblkid probe"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/mkswap.c:376 disk-utils/mkswap.c:410 disk-utils/mkswap.c:625
msgid "unable to rewind swap-device"
msgstr ""

#: disk-utils/mkswap.c:414
#, fuzzy
msgid "unable to erase bootbits sectors"
msgstr "不能读超级块"

#: disk-utils/mkswap.c:430
#, fuzzy, c-format
msgid "%s: warning: don't erase bootbits sectors"
msgstr "不能读超级块"

#: disk-utils/mkswap.c:433
#, c-format
msgid "        (%s partition table detected). "
msgstr ""

#: disk-utils/mkswap.c:435
#, c-format
msgid "        on whole disk. "
msgstr ""

#: disk-utils/mkswap.c:437
#, c-format
msgid "        (compiled without libblkid). "
msgstr ""

#: disk-utils/mkswap.c:489
#, fuzzy
msgid "parse page size failed"
msgstr "查找失败"

#: disk-utils/mkswap.c:495
#, fuzzy
msgid "parse version number failed"
msgstr "查找失败"

#: disk-utils/mkswap.c:501
#, c-format
msgid "warning: ignore -U (UUIDs are unsupported by %s)"
msgstr ""

#: disk-utils/mkswap.c:525
#, c-format
msgid "does not support swapspace version %d."
msgstr ""

#: disk-utils/mkswap.c:530
msgid "error: UUID parsing failed"
msgstr ""

#: disk-utils/mkswap.c:539
msgid "error: Nowhere to set up swap on?"
msgstr ""

#: disk-utils/mkswap.c:545
#, fuzzy
msgid "invalid block count argument"
msgstr "%s:不是一个块设备\n"

#: disk-utils/mkswap.c:553
#, c-format
msgid "error: size %llu KiB is larger than device size %llu KiB"
msgstr ""

#: disk-utils/mkswap.c:559
#, c-format
msgid "error: swap area needs to be at least %ld KiB"
msgstr ""

#: disk-utils/mkswap.c:575
#, c-format
msgid "warning: truncating swap area to %llu KiB"
msgstr ""

#: disk-utils/mkswap.c:580
#, c-format
msgid "error: %s is mounted; will not make swapspace."
msgstr ""

#: disk-utils/mkswap.c:601
#, c-format
msgid "warning: %s is misaligned"
msgstr ""

#: disk-utils/mkswap.c:614
msgid "Unable to set up swap-space: unreadable"
msgstr ""

#: disk-utils/mkswap.c:617
#, c-format
msgid "Setting up swapspace version 1, size = %llu KiB\n"
msgstr ""

#: disk-utils/mkswap.c:629
#, fuzzy, c-format
msgid "%s: unable to write signature page"
msgstr "不能写 inode map"

#: disk-utils/mkswap.c:638
msgid "fsync failed"
msgstr ""

#: disk-utils/mkswap.c:650
#, fuzzy, c-format
msgid "%s: unable to obtain selinux file label"
msgstr "%s:不是一个块设备\n"

#: disk-utils/mkswap.c:653
msgid "unable to matchpathcon()"
msgstr ""

#: disk-utils/mkswap.c:656
msgid "unable to create new selinux context"
msgstr ""

#: disk-utils/mkswap.c:658
msgid "couldn't compute selinux context"
msgstr ""

#: disk-utils/mkswap.c:664
#, fuzzy, c-format
msgid "unable to relabel %s to %s"
msgstr "不能读 inodes"

#: disk-utils/partx.c:79
#, fuzzy
msgid "partition number"
msgstr "重新读取分区表"

#: disk-utils/partx.c:80
msgid "start of the partition in sectors"
msgstr ""

#: disk-utils/partx.c:81
msgid "end of the partition in sectors"
msgstr ""

#: disk-utils/partx.c:82
msgid "number of sectors"
msgstr ""

#: disk-utils/partx.c:83
msgid "human readable size"
msgstr ""

#: disk-utils/partx.c:84
#, fuzzy
msgid "partition name"
msgstr "重新读取分区表"

#: disk-utils/partx.c:85 misc-utils/findmnt.c:112 misc-utils/lsblk.c:118
msgid "partition UUID"
msgstr ""

#: disk-utils/partx.c:86
msgid "partition table type (dos, gpt, ...)"
msgstr ""

#: disk-utils/partx.c:87
msgid "partition flags"
msgstr ""

#: disk-utils/partx.c:88
msgid "partition type hex or uuid"
msgstr ""

#: disk-utils/partx.c:106 sys-utils/losetup.c:258
#, fuzzy
msgid "failed to initialize loopcxt"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/partx.c:110
#, fuzzy, c-format
msgid "%s: failed to find unused loop device"
msgstr "%s:不是一个块设备\n"

#: disk-utils/partx.c:114
#, c-format
msgid "Trying to use '%s' for the loop device\n"
msgstr ""

#: disk-utils/partx.c:118
#, fuzzy, c-format
msgid "%s: failed to set backing file"
msgstr "不能读 inodes"

#: disk-utils/partx.c:123 sys-utils/losetup.c:421 sys-utils/mount.c:387
#, fuzzy, c-format
msgid "%s: failed to setup loop device"
msgstr "%s:不是一个块设备\n"

#: disk-utils/partx.c:153 misc-utils/findmnt.c:337 misc-utils/lsblk.c:252
#: misc-utils/lslocks.c:342 sys-utils/lscpu.c:259 sys-utils/prlimit.c:272
#: sys-utils/wdctl.c:121
#, fuzzy, c-format
msgid "unknown column: %s"
msgstr "%s: 未知命令: %s\n"

#: disk-utils/partx.c:200
#, fuzzy, c-format
msgid "%s: failed to get partition number"
msgstr "在 write_block 中查找失败"

#: disk-utils/partx.c:265
#, c-format
msgid "%s: error deleting partition %d"
msgstr ""

#: disk-utils/partx.c:267
#, c-format
msgid "%s: error deleting partitions %d-%d"
msgstr ""

#: disk-utils/partx.c:291 disk-utils/partx.c:852
#, c-format
msgid "specified range <%d:%d> does not make sense"
msgstr ""

#: disk-utils/partx.c:300
#, c-format
msgid "%s: partition #%d removed\n"
msgstr ""

#: disk-utils/partx.c:304
#, fuzzy, c-format
msgid "%s: partition #%d already doesn't exist\n"
msgstr "%s 失败.\n"

#: disk-utils/partx.c:309
#, fuzzy, c-format
msgid "%s: deleting partition #%d failed"
msgstr "%s 失败.\n"

#: disk-utils/partx.c:329
#, c-format
msgid "%s: error adding partition %d"
msgstr ""

#: disk-utils/partx.c:331
#, c-format
msgid "%s: error adding partitions %d-%d"
msgstr ""

#: disk-utils/partx.c:368
#, c-format
msgid "%s: partition #%d added\n"
msgstr ""

#: disk-utils/partx.c:373
#, fuzzy, c-format
msgid "%s: adding partition #%d failed"
msgstr "%s 失败.\n"

#: disk-utils/partx.c:426
#, c-format
msgid "#%2d: %9ju-%9ju (%9ju sectors, %6ju MB)\n"
msgstr ""

#: disk-utils/partx.c:443 misc-utils/findmnt.c:534 misc-utils/findmnt.c:551
#: misc-utils/lslocks.c:391 sys-utils/prlimit.c:223 sys-utils/wdctl.c:183
#, fuzzy
msgid "failed to add line to output"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/partx.c:531 misc-utils/findmnt.c:1301 misc-utils/lsblk.c:1367
#: misc-utils/lslocks.c:444 sys-utils/lscpu.c:1020 sys-utils/prlimit.c:284
#: sys-utils/wdctl.c:225
#, fuzzy
msgid "failed to initialize output table"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/partx.c:539 misc-utils/findmnt.c:1319 misc-utils/lsblk.c:1377
#: misc-utils/lslocks.c:452 sys-utils/prlimit.c:292 sys-utils/wdctl.c:234
msgid "failed to initialize output column"
msgstr ""

#: disk-utils/partx.c:577
#, fuzzy, c-format
msgid "failed to initialize blkid filter for '%s'"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/partx.c:585
#, fuzzy, c-format
msgid "%s: failed to read partition table"
msgstr "重新读取分区表"

#: disk-utils/partx.c:591
#, c-format
msgid "%s: partition table type '%s' detected\n"
msgstr ""

#: disk-utils/partx.c:595
#, c-format
msgid "%s: partition table with no partitions"
msgstr ""

#: disk-utils/partx.c:607
#, c-format
msgid " %s [-a|-d|-s] [--nr <n:m> | <partition>] <disk>\n"
msgstr ""

#: disk-utils/partx.c:611
msgid ""
" -a, --add            add specified partitions or all of them\n"
" -d, --delete         delete specified partitions or all of them\n"
" -l, --list           list partitions (DEPRECATED)\n"
" -s, --show           list partitions\n"
"\n"
" -b, --bytes          print SIZE in bytes rather than in human readable "
"format\n"
" -g, --noheadings     don't print headings for --show\n"
" -n, --nr <n:m>       specify the range of partitions (e.g. --nr 2:4)\n"
" -o, --output <type>  define which output columns to use\n"
" -P, --pairs          use key=\"value\" output format\n"
" -r, --raw            use raw output format\n"
" -t, --type <type>    specify the partition type (dos, bsd, solaris, etc.)\n"
" -v, --verbose        verbose mode\n"
msgstr ""

#: disk-utils/partx.c:629
#, fuzzy
msgid ""
"\n"
"Available columns (for --show, --raw or --pairs):\n"
msgstr "可用的命令:\n"

#: disk-utils/partx.c:691
#, fuzzy
msgid "failed to parse --nr <M-N> range"
msgstr "不能读 inodes"

#: disk-utils/partx.c:788
msgid "--nr and <partition> are mutually exclusive"
msgstr ""

#: disk-utils/partx.c:807
#, c-format
msgid "partition: %s, disk: %s, lower: %d, upper: %d\n"
msgstr ""

#: disk-utils/partx.c:819
#, fuzzy, c-format
msgid "%s: cannot delete partitions"
msgstr "%s 失败.\n"

#: disk-utils/partx.c:822
#, c-format
msgid "%s: partitioned loop devices unsupported"
msgstr ""

#: disk-utils/partx.c:839
#, fuzzy, c-format
msgid "%s: failed to initialize blkid prober"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/raw.c:52
#, c-format
msgid ""
" %1$s %2$srawN <major> <minor>\n"
" %1$s %2$srawN /dev/<blockdevice>\n"
" %1$s -q %2$srawN\n"
" %1$s -qa\n"
msgstr ""

#: disk-utils/raw.c:58
msgid " -q, --query    set query mode\n"
msgstr ""

#: disk-utils/raw.c:59
msgid " -a, --all      query all raw devices\n"
msgstr ""

#: disk-utils/raw.c:161
#, c-format
msgid ""
"Device '%s' is the control raw device (use raw<N> where <N> is greater than "
"zero)"
msgstr ""

#: disk-utils/raw.c:178
#, fuzzy, c-format
msgid "Cannot locate block device '%s'"
msgstr "%s:不是一个块设备\n"

#: disk-utils/raw.c:181
#, fuzzy, c-format
msgid "Device '%s' is not a block device"
msgstr "%s:不是一个块设备\n"

#: disk-utils/raw.c:190 disk-utils/raw.c:193 sys-utils/ipcrm.c:340
#: sys-utils/ipcrm.c:353 sys-utils/ipcrm.c:366
#, fuzzy
msgid "failed to parse argument"
msgstr "不能读 inodes"

#: disk-utils/raw.c:210
#, fuzzy, c-format
msgid "Cannot open master raw device '%s'"
msgstr "%s:不是一个块设备\n"

#: disk-utils/raw.c:225
#, fuzzy, c-format
msgid "Cannot locate raw device '%s'"
msgstr "%s:不是一个块设备\n"

#: disk-utils/raw.c:228
#, fuzzy, c-format
msgid "Raw device '%s' is not a character dev"
msgstr "%s:不是一个块设备\n"

#: disk-utils/raw.c:232
#, fuzzy, c-format
msgid "Device '%s' is not a raw dev"
msgstr "%s:不是一个块设备\n"

#: disk-utils/raw.c:242
msgid "Error querying raw device"
msgstr ""

#: disk-utils/raw.c:251 disk-utils/raw.c:266
#, c-format
msgid "%sraw%d:  bound to major %d, minor %d\n"
msgstr ""

#: disk-utils/raw.c:265
msgid "Error setting raw device"
msgstr ""

#: disk-utils/swaplabel.c:50 disk-utils/swaplabel.c:63
#, fuzzy, c-format
msgid "%s: unable to probe device"
msgstr "%s:不是一个块设备\n"

#: disk-utils/swaplabel.c:65
#, c-format
msgid "%s: ambivalent probing result, use wipefs(8)"
msgstr ""

#: disk-utils/swaplabel.c:67
#, c-format
msgid "%s: not a valid swap partition"
msgstr ""

#: disk-utils/swaplabel.c:74
#, c-format
msgid "%s: unsupported swap version '%s'"
msgstr ""

#: disk-utils/swaplabel.c:105
#, fuzzy, c-format
msgid "%s: failed to open"
msgstr "不能读 inodes"

#: disk-utils/swaplabel.c:114
#, fuzzy, c-format
msgid "failed to parse UUID: %s"
msgstr "不能读 inodes"

#: disk-utils/swaplabel.c:118
#, c-format
msgid "%s: failed to seek to swap UUID"
msgstr ""

#: disk-utils/swaplabel.c:122
#, fuzzy, c-format
msgid "%s: failed to write UUID"
msgstr "不能读 inodes"

#: disk-utils/swaplabel.c:133
#, c-format
msgid "%s: failed to seek to swap label "
msgstr ""

#: disk-utils/swaplabel.c:140
#, c-format
msgid "label is too long. Truncating it to '%s'"
msgstr ""

#: disk-utils/swaplabel.c:143
#, fuzzy, c-format
msgid "%s: failed to write label"
msgstr "在 write_block 中查找失败"

#: disk-utils/swaplabel.c:162
msgid ""
" -L, --label <label> specify a new label\n"
" -U, --uuid <uuid>   specify a new uuid\n"
msgstr ""

#: disk-utils/swaplabel.c:205
msgid "ignore -U (UUIDs are unsupported)"
msgstr ""

#: fdisks/cfdisk.c:363
#, c-format
msgid "%s: Out of memory!\n"
msgstr ""

#: fdisks/cfdisk.c:388 fdisks/cfdisk.c:1901
msgid "Unusable"
msgstr ""

#: fdisks/cfdisk.c:390 fdisks/cfdisk.c:1903
msgid "Free Space"
msgstr ""

#: fdisks/cfdisk.c:405
#, c-format
msgid "Disk has been changed.\n"
msgstr ""

#: fdisks/cfdisk.c:407
#, c-format
msgid "Reboot the system to ensure the partition table is correctly updated.\n"
msgstr ""

#: fdisks/cfdisk.c:411
#, c-format
msgid ""
"\n"
"WARNING: If you have created or modified any\n"
"DOS 6.x partitions, please see the cfdisk manual\n"
"page for additional information.\n"
msgstr ""

#: fdisks/cfdisk.c:555
msgid "FATAL ERROR"
msgstr ""

#: fdisks/cfdisk.c:556
msgid "Press any key to exit cfdisk"
msgstr ""

#: fdisks/cfdisk.c:603 fdisks/cfdisk.c:611
msgid "Cannot seek on disk drive"
msgstr ""

#: fdisks/cfdisk.c:605
msgid "Cannot read disk drive"
msgstr ""

#: fdisks/cfdisk.c:613
msgid "Cannot write disk drive"
msgstr ""

#: fdisks/cfdisk.c:821
msgid "Too many partitions"
msgstr ""

#: fdisks/cfdisk.c:826
msgid "Partition begins before sector 0"
msgstr ""

#: fdisks/cfdisk.c:831
msgid "Partition ends before sector 0"
msgstr ""

#: fdisks/cfdisk.c:836
msgid "Partition begins after end-of-disk"
msgstr ""

#: fdisks/cfdisk.c:841
msgid "Partition ends after end-of-disk"
msgstr ""

#: fdisks/cfdisk.c:865
msgid "logical partitions not in disk order"
msgstr ""

#: fdisks/cfdisk.c:868
msgid "logical partitions overlap"
msgstr ""

#: fdisks/cfdisk.c:872
msgid "enlarged logical partitions overlap"
msgstr ""

#: fdisks/cfdisk.c:902
msgid ""
"!!!! Internal error creating logical drive with no extended partition !!!!"
msgstr ""

#: fdisks/cfdisk.c:913 fdisks/cfdisk.c:925
msgid ""
"Cannot create logical drive here -- would create two extended partitions"
msgstr ""

#: fdisks/cfdisk.c:1059
msgid "Menu item too long. Menu may look odd."
msgstr ""

#: fdisks/cfdisk.c:1174
msgid "Illegal key"
msgstr ""

#: fdisks/cfdisk.c:1199
msgid "Press a key to continue"
msgstr ""

#: fdisks/cfdisk.c:1246 fdisks/cfdisk.c:1872 fdisks/cfdisk.c:2404
#: fdisks/cfdisk.c:2406
msgid "Primary"
msgstr ""

#: fdisks/cfdisk.c:1246
msgid "Create a new primary partition"
msgstr ""

#: fdisks/cfdisk.c:1247 fdisks/cfdisk.c:1872 fdisks/cfdisk.c:2403
#: fdisks/cfdisk.c:2406
msgid "Logical"
msgstr ""

#: fdisks/cfdisk.c:1247
msgid "Create a new logical partition"
msgstr ""

#: fdisks/cfdisk.c:1248 fdisks/cfdisk.c:1303 fdisks/cfdisk.c:2077
msgid "Cancel"
msgstr ""

#: fdisks/cfdisk.c:1248 fdisks/cfdisk.c:1303
msgid "Don't create a partition"
msgstr ""

#: fdisks/cfdisk.c:1264
msgid "!!! Internal error !!!"
msgstr ""

#: fdisks/cfdisk.c:1267
msgid "Size (in MB): "
msgstr ""

#: fdisks/cfdisk.c:1301
msgid "Beginning"
msgstr ""

#: fdisks/cfdisk.c:1301
msgid "Add partition at beginning of free space"
msgstr ""

#: fdisks/cfdisk.c:1302
msgid "End"
msgstr ""

#: fdisks/cfdisk.c:1302
msgid "Add partition at end of free space"
msgstr ""

#: fdisks/cfdisk.c:1320
msgid "No room to create the extended partition"
msgstr ""

#: fdisks/cfdisk.c:1389
msgid "No partition table.\n"
msgstr ""

#: fdisks/cfdisk.c:1393
msgid "No partition table. Starting with zero table."
msgstr ""

#: fdisks/cfdisk.c:1403
msgid "Bad signature on partition table"
msgstr ""

#: fdisks/cfdisk.c:1407
msgid "Unknown partition table type"
msgstr ""

#: fdisks/cfdisk.c:1409
msgid "Do you wish to start with a zero table [y/N] ?"
msgstr ""

#: fdisks/cfdisk.c:1456
msgid "You specified more cylinders than fit on disk"
msgstr ""

#: fdisks/cfdisk.c:1492
msgid "Cannot open disk drive"
msgstr ""

#: fdisks/cfdisk.c:1494 fdisks/cfdisk.c:1683
msgid "Opened disk read-only - you have no permission to write"
msgstr ""

#: fdisks/cfdisk.c:1505
msgid ""
"Warning!!  Unsupported GPT (GUID Partition Table) detected. Use GNU Parted."
msgstr ""

#: fdisks/cfdisk.c:1524
msgid "Cannot get disk size"
msgstr ""

#: fdisks/cfdisk.c:1550
msgid "Bad primary partition"
msgstr ""

#: fdisks/cfdisk.c:1580
msgid "Bad logical partition"
msgstr ""

#: fdisks/cfdisk.c:1695
msgid "Warning!!  This may destroy data on your disk!"
msgstr ""

#: fdisks/cfdisk.c:1699
msgid ""
"Are you sure you want to write the partition table to disk? (yes or no): "
msgstr ""

#: fdisks/cfdisk.c:1705 sys-utils/lscpu.c:864 sys-utils/lscpu.c:874
#, c-format
msgid "no"
msgstr ""

#: fdisks/cfdisk.c:1707
msgid "Did not write partition table to disk"
msgstr ""

#: fdisks/cfdisk.c:1709 sys-utils/lscpu.c:864 sys-utils/lscpu.c:874
#, c-format
msgid "yes"
msgstr ""

#: fdisks/cfdisk.c:1713
msgid "Please enter `yes' or `no'"
msgstr ""

#: fdisks/cfdisk.c:1717
msgid "Writing partition table to disk..."
msgstr ""

#: fdisks/cfdisk.c:1742 fdisks/cfdisk.c:1746
msgid "Wrote partition table to disk"
msgstr ""

#: fdisks/cfdisk.c:1744
msgid ""
"Wrote partition table, but re-read table failed.  Run partprobe(8), kpartx"
"(8) or reboot to update table."
msgstr ""

#: fdisks/cfdisk.c:1754
msgid "No primary partitions are marked bootable. DOS MBR cannot boot this."
msgstr ""

#: fdisks/cfdisk.c:1756
msgid ""
"More than one primary partition is marked bootable. DOS MBR cannot boot this."
msgstr ""

#: fdisks/cfdisk.c:1814 fdisks/cfdisk.c:1933 fdisks/cfdisk.c:2017
msgid "Enter filename or press RETURN to display on screen: "
msgstr ""

#: fdisks/cfdisk.c:1823 fdisks/cfdisk.c:1941 fdisks/cfdisk.c:2025
#, c-format
msgid "Cannot open file '%s'"
msgstr ""

#: fdisks/cfdisk.c:1834
#, c-format
msgid "Disk Drive: %s\n"
msgstr ""

#: fdisks/cfdisk.c:1836
msgid "Sector 0:\n"
msgstr ""

#: fdisks/cfdisk.c:1843
#, c-format
msgid "Sector %d:\n"
msgstr ""

#: fdisks/cfdisk.c:1863
msgid "   None   "
msgstr ""

#: fdisks/cfdisk.c:1865
msgid "   Pri/Log"
msgstr ""

#: fdisks/cfdisk.c:1867
msgid "   Primary"
msgstr ""

#: fdisks/cfdisk.c:1869
msgid "   Logical"
msgstr ""

#: fdisks/cfdisk.c:1907 fdisks/fdisk.c:982 fdisks/fdisk.c:1306
#: fdisks/fdisksgilabel.c:208 fdisks/fdisksunlabel.c:582 fdisks/sfdisk.c:609
msgid "Unknown"
msgstr ""

#: fdisks/cfdisk.c:1913 fdisks/cfdisk.c:2381 fdisks/fdisksunlabel.c:32
msgid "Boot"
msgstr ""

#: fdisks/cfdisk.c:1915
#, c-format
msgid "(%02X)"
msgstr ""

#: fdisks/cfdisk.c:1917
msgid "None"
msgstr ""

#: fdisks/cfdisk.c:1952 fdisks/cfdisk.c:2036
#, c-format
msgid "Partition Table for %s\n"
msgstr ""

#: fdisks/cfdisk.c:1954
msgid "               First       Last\n"
msgstr ""

#: fdisks/cfdisk.c:1955
msgid ""
" # Type       Sector      Sector   Offset    Length   Filesystem Type (ID) "
"Flag\n"
msgstr ""

#: fdisks/cfdisk.c:1956
msgid ""
"-- ------- ----------- ----------- ------ ----------- -------------------- "
"----\n"
msgstr ""

#: fdisks/cfdisk.c:2039
msgid "         ---Starting----      ----Ending-----    Start     Number of\n"
msgstr ""

#: fdisks/cfdisk.c:2040
msgid " # Flags Head Sect  Cyl   ID  Head Sect  Cyl     Sector    Sectors\n"
msgstr ""

#: fdisks/cfdisk.c:2041
msgid "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n"
msgstr ""

#: fdisks/cfdisk.c:2074
msgid "Raw"
msgstr ""

#: fdisks/cfdisk.c:2074
msgid "Print the table using raw data format"
msgstr ""

#: fdisks/cfdisk.c:2075 fdisks/cfdisk.c:2178
msgid "Sectors"
msgstr ""

#: fdisks/cfdisk.c:2075
msgid "Print the table ordered by sectors"
msgstr ""

#: fdisks/cfdisk.c:2076
msgid "Table"
msgstr ""

#: fdisks/cfdisk.c:2076
msgid "Just print the partition table"
msgstr ""

#: fdisks/cfdisk.c:2077
msgid "Don't print the table"
msgstr ""

#: fdisks/cfdisk.c:2105
msgid "Help Screen for cfdisk"
msgstr ""

#: fdisks/cfdisk.c:2107
msgid "This is cfdisk, a curses based disk partitioning program, which"
msgstr ""

#: fdisks/cfdisk.c:2108
msgid "allows you to create, delete and modify partitions on your hard"
msgstr ""

#: fdisks/cfdisk.c:2109
msgid "disk drive."
msgstr ""

#: fdisks/cfdisk.c:2111
msgid "Copyright (C) 1994-1999 Kevin E. Martin & aeb"
msgstr ""

#: fdisks/cfdisk.c:2113
msgid "Command      Meaning"
msgstr ""

#: fdisks/cfdisk.c:2114
msgid "-------      -------"
msgstr ""

#: fdisks/cfdisk.c:2115
msgid "  b          Toggle bootable flag of the current partition"
msgstr ""

#: fdisks/cfdisk.c:2116
msgid "  d          Delete the current partition"
msgstr ""

#: fdisks/cfdisk.c:2117
msgid "  g          Change cylinders, heads, sectors-per-track parameters"
msgstr ""

#: fdisks/cfdisk.c:2118
msgid "             WARNING: This option should only be used by people who"
msgstr ""

#: fdisks/cfdisk.c:2119
msgid "             know what they are doing."
msgstr ""

#: fdisks/cfdisk.c:2120
msgid "  h          Print this screen"
msgstr ""

#: fdisks/cfdisk.c:2121
msgid "  m          Maximize disk usage of the current partition"
msgstr ""

#: fdisks/cfdisk.c:2122
msgid "             Note: This may make the partition incompatible with"
msgstr ""

#: fdisks/cfdisk.c:2123
msgid "             DOS, OS/2, ..."
msgstr ""

#: fdisks/cfdisk.c:2124
msgid "  n          Create new partition from free space"
msgstr ""

#: fdisks/cfdisk.c:2125
msgid "  p          Print partition table to the screen or to a file"
msgstr ""

#: fdisks/cfdisk.c:2126
msgid "             There are several different formats for the partition"
msgstr ""

#: fdisks/cfdisk.c:2127
msgid "             that you can choose from:"
msgstr ""

#: fdisks/cfdisk.c:2128
msgid "                r - Raw data (exactly what would be written to disk)"
msgstr ""

#: fdisks/cfdisk.c:2129
msgid "                s - Table ordered by sectors"
msgstr ""

#: fdisks/cfdisk.c:2130
msgid "                t - Table in raw format"
msgstr ""

#: fdisks/cfdisk.c:2131
msgid "  q          Quit program without writing partition table"
msgstr ""

#: fdisks/cfdisk.c:2132
msgid "  t          Change the filesystem type"
msgstr ""

#: fdisks/cfdisk.c:2133
msgid "  u          Change units of the partition size display"
msgstr ""

#: fdisks/cfdisk.c:2134
msgid "             Rotates through MB, sectors and cylinders"
msgstr ""

#: fdisks/cfdisk.c:2135
msgid "  W          Write partition table to disk (must enter upper case W)"
msgstr ""

#: fdisks/cfdisk.c:2136
msgid "             Since this might destroy data on the disk, you must"
msgstr ""

#: fdisks/cfdisk.c:2137
msgid "             either confirm or deny the write by entering `yes' or"
msgstr ""

#: fdisks/cfdisk.c:2138
msgid "             `no'"
msgstr ""

#: fdisks/cfdisk.c:2139
msgid "Up Arrow     Move cursor to the previous partition"
msgstr ""

#: fdisks/cfdisk.c:2140
msgid "Down Arrow   Move cursor to the next partition"
msgstr ""

#: fdisks/cfdisk.c:2141
msgid "CTRL-L       Redraws the screen"
msgstr ""

#: fdisks/cfdisk.c:2142
msgid "  ?          Print this screen"
msgstr ""

#: fdisks/cfdisk.c:2144
msgid "Note: All of the commands can be entered with either upper or lower"
msgstr ""

#: fdisks/cfdisk.c:2145
msgid "case letters (except for Writes)."
msgstr ""

#: fdisks/cfdisk.c:2176 fdisks/fdisksunlabel.c:195
msgid "Cylinders"
msgstr ""

#: fdisks/cfdisk.c:2176
msgid "Change cylinder geometry"
msgstr ""

#: fdisks/cfdisk.c:2177 fdisks/fdisksunlabel.c:193
msgid "Heads"
msgstr ""

#: fdisks/cfdisk.c:2177
msgid "Change head geometry"
msgstr ""

#: fdisks/cfdisk.c:2178
msgid "Change sector geometry"
msgstr ""

#: fdisks/cfdisk.c:2179
msgid "Done"
msgstr ""

#: fdisks/cfdisk.c:2179
msgid "Done with changing geometry"
msgstr ""

#: fdisks/cfdisk.c:2192
msgid "Enter the number of cylinders: "
msgstr ""

#: fdisks/cfdisk.c:2203 fdisks/cfdisk.c:2781
msgid "Illegal cylinders value"
msgstr ""

#: fdisks/cfdisk.c:2209
msgid "Enter the number of heads: "
msgstr ""

#: fdisks/cfdisk.c:2216 fdisks/cfdisk.c:2791
msgid "Illegal heads value"
msgstr ""

#: fdisks/cfdisk.c:2222
msgid "Enter the number of sectors per track: "
msgstr ""

#: fdisks/cfdisk.c:2229 fdisks/cfdisk.c:2798
msgid "Illegal sectors value"
msgstr ""

#: fdisks/cfdisk.c:2332
msgid "Enter filesystem type: "
msgstr ""

#: fdisks/cfdisk.c:2350
msgid "Cannot change FS Type to empty"
msgstr ""

#: fdisks/cfdisk.c:2352
msgid "Cannot change FS Type to extended"
msgstr ""

#: fdisks/cfdisk.c:2383
#, c-format
msgid "Unk(%02X)"
msgstr ""

#: fdisks/cfdisk.c:2386 fdisks/cfdisk.c:2389
msgid ", NC"
msgstr ""

#: fdisks/cfdisk.c:2394 fdisks/cfdisk.c:2397
msgid "NC"
msgstr ""

#: fdisks/cfdisk.c:2405
msgid "Pri/Log"
msgstr ""

#: fdisks/cfdisk.c:2412
#, c-format
msgid "Unknown (%02X)"
msgstr ""

#: fdisks/cfdisk.c:2481
#, c-format
msgid "Disk Drive: %s"
msgstr ""

#: fdisks/cfdisk.c:2488
#, c-format
msgid "Size: %lld bytes, %lld MB"
msgstr ""

#: fdisks/cfdisk.c:2491
#, c-format
msgid "Size: %lld bytes, %lld.%lld GB"
msgstr ""

#: fdisks/cfdisk.c:2495
#, c-format
msgid "Heads: %d   Sectors per Track: %d   Cylinders: %lld"
msgstr ""

#: fdisks/cfdisk.c:2499 login-utils/chfn.c:248 login-utils/chfn.c:328
msgid "Name"
msgstr ""

#: fdisks/cfdisk.c:2500
msgid "Flags"
msgstr ""

#: fdisks/cfdisk.c:2501
msgid "Part Type"
msgstr ""

#: fdisks/cfdisk.c:2502
msgid "FS Type"
msgstr ""

#: fdisks/cfdisk.c:2503
msgid "[Label]"
msgstr ""

#: fdisks/cfdisk.c:2505
msgid "    Sectors"
msgstr ""

#: fdisks/cfdisk.c:2507
msgid "  Cylinders"
msgstr ""

#: fdisks/cfdisk.c:2509
msgid "  Size (MB)"
msgstr ""

#: fdisks/cfdisk.c:2511
msgid "  Size (GB)"
msgstr ""

#: fdisks/cfdisk.c:2533
msgid "No more partitions"
msgstr ""

#: fdisks/cfdisk.c:2566
msgid "Bootable"
msgstr ""

#: fdisks/cfdisk.c:2566
msgid "Toggle bootable flag of the current partition"
msgstr ""

#: fdisks/cfdisk.c:2567
msgid "Delete"
msgstr ""

#: fdisks/cfdisk.c:2567
msgid "Delete the current partition"
msgstr ""

#: fdisks/cfdisk.c:2568
msgid "Geometry"
msgstr ""

#: fdisks/cfdisk.c:2568
msgid "Change disk geometry (experts only)"
msgstr ""

#: fdisks/cfdisk.c:2569
msgid "Help"
msgstr ""

#: fdisks/cfdisk.c:2569
msgid "Print help screen"
msgstr ""

#: fdisks/cfdisk.c:2570
msgid "Maximize"
msgstr ""

#: fdisks/cfdisk.c:2570
msgid "Maximize disk usage of the current partition (experts only)"
msgstr ""

#: fdisks/cfdisk.c:2571
msgid "New"
msgstr ""

#: fdisks/cfdisk.c:2571
msgid "Create new partition from free space"
msgstr ""

#: fdisks/cfdisk.c:2572
msgid "Print"
msgstr ""

#: fdisks/cfdisk.c:2572
msgid "Print partition table to the screen or to a file"
msgstr ""

#: fdisks/cfdisk.c:2573
msgid "Quit"
msgstr ""

#: fdisks/cfdisk.c:2573
msgid "Quit program without writing partition table"
msgstr ""

#: fdisks/cfdisk.c:2574
msgid "Type"
msgstr ""

#: fdisks/cfdisk.c:2574
msgid "Change the filesystem type (DOS, Linux, OS/2 and so on)"
msgstr ""

#: fdisks/cfdisk.c:2575
msgid "Units"
msgstr ""

#: fdisks/cfdisk.c:2575
msgid "Change units of the partition size display (MB, sect, cyl)"
msgstr ""

#: fdisks/cfdisk.c:2576
msgid "Write"
msgstr ""

#: fdisks/cfdisk.c:2576
msgid "Write partition table to disk (this might destroy data)"
msgstr ""

#: fdisks/cfdisk.c:2623
msgid "Cannot make this partition bootable"
msgstr ""

#: fdisks/cfdisk.c:2633
msgid "Cannot delete an empty partition"
msgstr ""

#: fdisks/cfdisk.c:2653 fdisks/cfdisk.c:2655
msgid "Cannot maximize this partition"
msgstr ""

#: fdisks/cfdisk.c:2663
msgid "This partition is unusable"
msgstr ""

#: fdisks/cfdisk.c:2665
msgid "This partition is already in use"
msgstr ""

#: fdisks/cfdisk.c:2682
msgid "Cannot change the type of an empty partition"
msgstr ""

#: fdisks/cfdisk.c:2726
msgid "Illegal command"
msgstr ""

#: fdisks/cfdisk.c:2736
#, c-format
msgid "Copyright (C) 1994-2002 Kevin E. Martin & aeb\n"
msgstr ""

#: fdisks/cfdisk.c:2743
#, c-format
msgid ""
"\n"
"Usage:\n"
"Print version:\n"
"        %s -v\n"
"Print partition table:\n"
"        %s -P {r|s|t} [options] device\n"
"Interactive use:\n"
"        %s [options] device\n"
"\n"
"Options:\n"
"-a: Use arrow instead of highlighting;\n"
"-z: Start with a zero partition table, instead of reading the pt from disk;\n"
"-c C -h H -s S: Override the kernel's idea of the number of cylinders,\n"
"                the number of heads and the number of sectors/track.\n"
"\n"
msgstr ""

#: fdisks/cfdisk.c:2779
#, fuzzy
msgid "cannot parse number of cylinders"
msgstr "不能读 inodes"

#: fdisks/cfdisk.c:2789
#, fuzzy
msgid "cannot parse number of heads"
msgstr "%s 失败.\n"

#: fdisks/cfdisk.c:2796
#, fuzzy
msgid "cannot parse number of sectors"
msgstr "不能读 inodes"

#: fdisks/fdiskaixlabel.c:29
msgid ""
"\n"
"\tThere is a valid AIX label on this disk.\n"
"\tUnfortunately Linux cannot handle these\n"
"\tdisks at the moment.  Nevertheless some\n"
"\tadvice:\n"
"\t1. fdisk will destroy its contents on write.\n"
"\t2. Be sure that this disk is NOT a still vital\n"
"\t   part of a volume group. (Otherwise you may\n"
"\t   erase the other disks as well, if unmirrored.)\n"
"\t3. Before deleting this physical volume be sure\n"
"\t   to remove the disk logically from your AIX\n"
"\t   machine.  (Otherwise you become an AIXpert)."
msgstr ""

#: fdisks/fdiskbsdlabel.c:123
#, c-format
msgid ""
"\n"
"BSD label for device: %s\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:157
#, c-format
msgid "Partition %s has invalid starting sector 0.\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:161
#, c-format
msgid "Reading disklabel of %s at sector %d.\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:171
#, c-format
msgid "There is no *BSD partition on %s.\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:185
msgid "BSD disklabel command (m for help): "
msgstr ""

#: fdisks/fdiskbsdlabel.c:265 fdisks/fdiskdoslabel.c:472
#: fdisks/fdisksgilabel.c:677 fdisks/fdisksunlabel.c:392
#, c-format
msgid "First %s"
msgstr ""

#: fdisks/fdiskbsdlabel.c:272 fdisks/fdisksunlabel.c:449
#, c-format
msgid "Last %s or +size or +sizeM or +sizeK"
msgstr ""

#: fdisks/fdiskbsdlabel.c:299
#, c-format
msgid "type: %s\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:301
#, c-format
msgid "type: %d\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:302
#, c-format
msgid "disk: %.*s\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:303
#, c-format
msgid "label: %.*s\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:304
#, c-format
msgid "flags:"
msgstr ""

#: fdisks/fdiskbsdlabel.c:306
#, c-format
msgid " removable"
msgstr ""

#: fdisks/fdiskbsdlabel.c:308
#, c-format
msgid " ecc"
msgstr ""

#: fdisks/fdiskbsdlabel.c:310
#, c-format
msgid " badsect"
msgstr ""

#: fdisks/fdiskbsdlabel.c:314
#, c-format
msgid "bytes/sector: %ld\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:315
#, c-format
msgid "sectors/track: %ld\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:316
#, c-format
msgid "tracks/cylinder: %ld\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:317
#, c-format
msgid "sectors/cylinder: %ld\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:318
#, c-format
msgid "cylinders: %ld\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:319
#, c-format
msgid "rpm: %d\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:320
#, c-format
msgid "interleave: %d\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:321
#, c-format
msgid "trackskew: %d\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:322
#, c-format
msgid "cylinderskew: %d\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:323
#, c-format
msgid "headswitch: %ld\t\t# milliseconds\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:325
#, c-format
msgid "track-to-track seek: %ld\t# milliseconds\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:327
#, c-format
msgid "drivedata: "
msgstr ""

#: fdisks/fdiskbsdlabel.c:336
#, c-format
msgid ""
"\n"
"%d partitions:\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:337
#, c-format
msgid "#       start       end      size     fstype   [fsize bsize   cpg]\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:386 fdisks/fdiskbsdlabel.c:389
#, c-format
msgid "Writing disklabel to %s.\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:401 fdisks/fdiskbsdlabel.c:403
#, c-format
msgid "%s contains no disklabel.\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:408
msgid "Do you want to create a disklabel? (y/n) "
msgstr ""

#: fdisks/fdiskbsdlabel.c:448
msgid "bytes/sector"
msgstr ""

#: fdisks/fdiskbsdlabel.c:449
msgid "sectors/track"
msgstr ""

#: fdisks/fdiskbsdlabel.c:450
msgid "tracks/cylinder"
msgstr ""

#: fdisks/fdiskbsdlabel.c:451 fdisks/fdisk.c:373 fdisks/sfdisk.c:913
msgid "cylinders"
msgstr ""

#: fdisks/fdiskbsdlabel.c:458
msgid "sectors/cylinder"
msgstr ""

#: fdisks/fdiskbsdlabel.c:462
#, c-format
msgid "Must be <= sectors/track * tracks/cylinder (default).\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:464
msgid "rpm"
msgstr ""

#: fdisks/fdiskbsdlabel.c:465
msgid "interleave"
msgstr ""

#: fdisks/fdiskbsdlabel.c:466
msgid "trackskew"
msgstr ""

#: fdisks/fdiskbsdlabel.c:467
msgid "cylinderskew"
msgstr ""

#: fdisks/fdiskbsdlabel.c:468
msgid "headswitch"
msgstr ""

#: fdisks/fdiskbsdlabel.c:469
msgid "track-to-track seek"
msgstr ""

#: fdisks/fdiskbsdlabel.c:510
#, c-format
msgid "Bootstrap: %sboot -> boot%s (%s): "
msgstr ""

#: fdisks/fdiskbsdlabel.c:535
#, c-format
msgid "Bootstrap overlaps with disk label!\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:556 fdisks/fdiskbsdlabel.c:558
#, c-format
msgid "Bootstrap installed on %s.\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:580
#, c-format
msgid "Partition (a-%c): "
msgstr ""

#: fdisks/fdiskbsdlabel.c:599 fdisks/fdiskdoslabel.c:608
#, c-format
msgid "The maximum number of partitions has been created\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:611
#, c-format
msgid "This partition already exists.\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:737
#, c-format
msgid "Warning: too many partitions (%d, maximum is %d).\n"
msgstr ""

#: fdisks/fdiskbsdlabel.c:785
#, c-format
msgid ""
"\n"
"Syncing disks.\n"
msgstr ""

#: fdisks/fdisk.c:75
msgid "toggle a bootable flag"
msgstr ""

#: fdisks/fdisk.c:76
#, fuzzy
msgid "toggle a read only flag"
msgstr "获得只读"

#: fdisks/fdisk.c:77
msgid "select bootable partition"
msgstr ""

#: fdisks/fdisk.c:78
msgid "change number of alternate cylinders"
msgstr ""

#: fdisks/fdisk.c:79
msgid "edit bsd disklabel"
msgstr ""

#: fdisks/fdisk.c:80
msgid "edit bootfile entry"
msgstr ""

#: fdisks/fdisk.c:81
msgid "move beginning of data in a partition"
msgstr ""

#: fdisks/fdisk.c:82
msgid "toggle the dos compatibility flag"
msgstr ""

#: fdisks/fdisk.c:83
msgid "toggle the mountable flag"
msgstr ""

#: fdisks/fdisk.c:84
msgid "select sgi swap partition"
msgstr ""

#: fdisks/fdisk.c:85
#, fuzzy
msgid "change number of cylinders"
msgstr "不能读 inodes"

#: fdisks/fdisk.c:86
#, fuzzy
msgid "delete a partition"
msgstr "重新读取分区表"

#: fdisks/fdisk.c:87
#, fuzzy
msgid "print the raw data in the partition table"
msgstr "重新读取分区表"

#: fdisks/fdisk.c:88
msgid "change number of extra sectors per cylinder"
msgstr ""

#: fdisks/fdisk.c:89
msgid "list extended partitions"
msgstr ""

#: fdisks/fdisk.c:90
msgid "edit drive data"
msgstr ""

#: fdisks/fdisk.c:91
#, fuzzy
msgid "fix partition order"
msgstr "重新读取分区表"

#: fdisks/fdisk.c:92
#, fuzzy
msgid "create an IRIX (SGI) partition table"
msgstr "重新读取分区表"

#: fdisks/fdisk.c:93
#, fuzzy
msgid "change number of heads"
msgstr "%s 失败.\n"

#: fdisks/fdisk.c:94
msgid "change interleave factor"
msgstr ""

#: fdisks/fdisk.c:95
msgid "change the disk identifier"
msgstr ""

#: fdisks/fdisk.c:96
msgid "install bootstrap"
msgstr ""

#: fdisks/fdisk.c:97
#, fuzzy
msgid "list known partition types"
msgstr "重新读取分区表"

#: fdisks/fdisk.c:98
msgid "print this menu"
msgstr ""

#: fdisks/fdisk.c:99
msgid "add a new partition"
msgstr ""

#: fdisks/fdisk.c:100
#, fuzzy
msgid "create a new empty DOS partition table"
msgstr "重新读取分区表"

#: fdisks/fdisk.c:101
msgid "change rotation speed (rpm)"
msgstr ""

#: fdisks/fdisk.c:102
#, fuzzy
msgid "print the partition table"
msgstr "重新读取分区表"

#: fdisks/fdisk.c:103
msgid "quit without saving changes"
msgstr ""

#: fdisks/fdisk.c:104
msgid "return to main menu"
msgstr ""

#: fdisks/fdisk.c:105
msgid "create a new empty Sun disklabel"
msgstr ""

#: fdisks/fdisk.c:106
msgid "change number of sectors/track"
msgstr ""

#: fdisks/fdisk.c:107
msgid "show complete disklabel"
msgstr ""

#: fdisks/fdisk.c:108
msgid "change a partition's system id"
msgstr ""

#: fdisks/fdisk.c:109
msgid "change display/entry units"
msgstr ""

#: fdisks/fdisk.c:110
#, fuzzy
msgid "verify the partition table"
msgstr "重新读取分区表"

#: fdisks/fdisk.c:111
msgid "write table to disk and exit"
msgstr ""

#: fdisks/fdisk.c:112
msgid "write disklabel to disk"
msgstr ""

#: fdisks/fdisk.c:113
msgid "extra functionality (experts only)"
msgstr ""

#: fdisks/fdisk.c:115
msgid "link BSD partition to non-BSD partition"
msgstr ""

#: fdisks/fdisk.c:117
msgid "change number of physical cylinders"
msgstr ""

#: fdisks/fdisk.c:145
#, c-format
msgid ""
"Usage:\n"
" %1$s [options] <disk>    change partition table\n"
" %1$s [options] -l <disk> list partition table(s)\n"
" %1$s -s <partition>      give partition size(s) in blocks\n"
"\n"
"Options:\n"
" -b <size>             sector size (512, 1024, 2048 or 4096)\n"
" -c[=<mode>]           compatible mode: 'dos' or 'nondos' (default)\n"
" -h                    print this help text\n"
" -u[=<unit>]           display units: 'cylinders' or 'sectors' (default)\n"
" -v                    print program version\n"
" -C <number>           specify the number of cylinders\n"
" -H <number>           specify the number of heads\n"
" -S <number>           specify the number of sectors per track\n"
"\n"
msgstr ""

#: fdisks/fdisk.c:167
#, fuzzy, c-format
msgid "unable to read %s"
msgstr "不能读 inodes"

#: fdisks/fdisk.c:170
#, fuzzy, c-format
msgid "unable to seek on %s"
msgstr "不能读 inodes"

#: fdisks/fdisk.c:173
#, fuzzy, c-format
msgid "unable to write %s"
msgstr "不能写 inodes"

#: fdisks/fdisk.c:176 fdisks/fdisk.c:1976
#, c-format
msgid "BLKGETSIZE ioctl failed on %s"
msgstr ""

#: fdisks/fdisk.c:179
#, fuzzy
msgid "fatal error"
msgstr "内部错误"

#: fdisks/fdisk.c:219
msgid "Command action"
msgstr ""

#: fdisks/fdisk.c:292
#, c-format
msgid "You must set"
msgstr ""

#: fdisks/fdisk.c:369
msgid "heads"
msgstr ""

#: fdisks/fdisk.c:371 fdisks/sfdisk.c:913
msgid "sectors"
msgstr ""

#: fdisks/fdisk.c:377
#, c-format
msgid ""
"%s%s.\n"
"You can do this from the extra functions menu.\n"
msgstr ""

#: fdisks/fdisk.c:378
msgid " and "
msgstr ""

#: fdisks/fdisk.c:399
#, c-format
msgid ""
"\n"
"WARNING: The size of this disk is %d.%d TB (%llu bytes).\n"
"DOS partition table format can not be used on drives for volumes\n"
"larger than (%llu bytes) for %ld-byte sectors. Use parted(1) and GUID \n"
"partition table format (GPT).\n"
"\n"
msgstr ""

#: fdisks/fdisk.c:417
#, c-format
msgid ""
"\n"
"The device presents a logical sector size that is smaller than\n"
"the physical sector size. Aligning to a physical sector (or optimal\n"
"I/O) size boundary is recommended, or performance may be impacted.\n"
msgstr ""

#: fdisks/fdisk.c:423
#, c-format
msgid ""
"\n"
"WARNING: DOS-compatible mode is deprecated. It's strongly recommended to\n"
"         switch off the mode (with command 'c')."
msgstr ""

#: fdisks/fdisk.c:428
#, c-format
msgid ""
"\n"
"WARNING: cylinders as display units are deprecated. Use command 'u' to\n"
"         change units to sectors.\n"
msgstr ""

#: fdisks/fdisk.c:539
#, c-format
msgid ""
"This disk has both DOS and BSD magic.\n"
"Give the 'b' command to go to BSD mode.\n"
msgstr ""

#: fdisks/fdisk.c:549
#, c-format
msgid "Device does not contain a recognized partition table\n"
msgstr ""

#: fdisks/fdisk.c:578
#, fuzzy, c-format
msgid "Do you really want to quit? "
msgstr "你确认要继续"

#: fdisks/fdisk.c:639
msgid "Hex code (type L to list codes): "
msgstr ""

#: fdisks/fdisk.c:673
#, c-format
msgid "%s (%u-%u, default %u): "
msgstr ""

#: fdisks/fdisk.c:743
#, c-format
msgid "Unsupported suffix: '%s'.\n"
msgstr ""

#: fdisks/fdisk.c:744
#, c-format
msgid ""
"Supported: 10^N: KB (KiloByte), MB (MegaByte), GB (GigaByte)\n"
"            2^N: K  (KibiByte), M  (MebiByte), G  (GibiByte)\n"
msgstr ""

#: fdisks/fdisk.c:770
#, c-format
msgid "Using default value %u\n"
msgstr ""

#: fdisks/fdisk.c:776
#, c-format
msgid "Value out of range.\n"
msgstr ""

#: fdisks/fdisk.c:803
msgid "Partition number"
msgstr ""

#: fdisks/fdisk.c:814
#, c-format
msgid "Warning: partition %d has empty type\n"
msgstr ""

#: fdisks/fdisk.c:847 fdisks/fdiskdoslabel.c:50
#, c-format
msgid "Selected partition %d\n"
msgstr ""

#: fdisks/fdisk.c:850
#, c-format
msgid "No partition is defined yet!\n"
msgstr ""

#: fdisks/fdisk.c:862
msgid "cylinder"
msgid_plural "cylinders"
msgstr[0] ""
msgstr[1] ""

#: fdisks/fdisk.c:863
msgid "sector"
msgid_plural "sectors"
msgstr[0] ""
msgstr[1] ""

#: fdisks/fdisk.c:872
#, c-format
msgid "Changing display/entry units to cylinders (DEPRECATED!)\n"
msgstr ""

#: fdisks/fdisk.c:874
#, c-format
msgid "Changing display/entry units to sectors\n"
msgstr ""

#: fdisks/fdisk.c:884
#, c-format
msgid "WARNING: Partition %d is an extended partition\n"
msgstr ""

#: fdisks/fdisk.c:894
#, c-format
msgid "DOS Compatibility flag is set (DEPRECATED!)\n"
msgstr ""

#: fdisks/fdisk.c:896
#, c-format
msgid "DOS Compatibility flag is not set\n"
msgstr ""

#: fdisks/fdisk.c:919
#, c-format
msgid "Partition %d is deleted\n"
msgstr ""

#: fdisks/fdisk.c:938
#, c-format
msgid "Partition %d does not exist yet!\n"
msgstr ""

#: fdisks/fdisk.c:943
#, c-format
msgid ""
"Type 0 means free space to many systems\n"
"(but not to Linux). Having partitions of\n"
"type 0 is probably unwise. You can delete\n"
"a partition using the `d' command.\n"
msgstr ""

#: fdisks/fdisk.c:952
#, c-format
msgid ""
"You cannot change a partition into an extended one or vice versa\n"
"Delete it first.\n"
msgstr ""

#: fdisks/fdisk.c:961
#, c-format
msgid ""
"Consider leaving partition 3 as Whole disk (5),\n"
"as SunOS/Solaris expects it and even Linux likes it.\n"
"\n"
msgstr ""

#: fdisks/fdisk.c:967
#, c-format
msgid ""
"Consider leaving partition 9 as volume header (0),\n"
"and partition 11 as entire volume (6), as IRIX expects it.\n"
"\n"
msgstr ""

#: fdisks/fdisk.c:984
#, c-format
msgid "Changed system type of partition %d to %x (%s)\n"
msgstr ""

#: fdisks/fdisk.c:987
#, c-format
msgid "System type of partition %d is unchanged: %x (%s)\n"
msgstr ""

#: fdisks/fdisk.c:1043
#, c-format
msgid "Partition %d has different physical/logical beginnings (non-Linux?):\n"
msgstr ""

#: fdisks/fdisk.c:1045 fdisks/fdisk.c:1053
#, c-format
msgid "     phys=(%d, %d, %d) "
msgstr ""

#: fdisks/fdisk.c:1046 fdisks/fdisk.c:1054
#, c-format
msgid "logical=(%d, %d, %d)\n"
msgstr ""

#: fdisks/fdisk.c:1051
#, c-format
msgid "Partition %d has different physical/logical endings:\n"
msgstr ""

#: fdisks/fdisk.c:1059
#, c-format
msgid "Partition %i does not end on cylinder boundary.\n"
msgstr ""

#: fdisks/fdisk.c:1068
#, c-format
msgid "Partition %i does not start on physical sector boundary.\n"
msgstr ""

#: fdisks/fdisk.c:1078
#, c-format
msgid ""
"\n"
"Disk %s: %ld MB, %lld bytes\n"
msgstr ""

#: fdisks/fdisk.c:1082
#, c-format
msgid ""
"\n"
"Disk %s: %ld.%ld GB, %llu bytes\n"
msgstr ""

#: fdisks/fdisk.c:1085
#, c-format
msgid "%d heads, %llu sectors/track, %llu cylinders"
msgstr ""

#: fdisks/fdisk.c:1088
#, c-format
msgid ", total %llu sectors"
msgstr ""

#: fdisks/fdisk.c:1090
#, c-format
msgid "Units = %s of %d * %ld = %ld bytes\n"
msgstr ""

#: fdisks/fdisk.c:1094
#, c-format
msgid "Sector size (logical/physical): %lu bytes / %lu bytes\n"
msgstr ""

#: fdisks/fdisk.c:1096
#, c-format
msgid "I/O size (minimum/optimal): %lu bytes / %lu bytes\n"
msgstr ""

#: fdisks/fdisk.c:1099
#, c-format
msgid "Alignment offset: %lu bytes\n"
msgstr ""

#: fdisks/fdisk.c:1208
#, c-format
msgid ""
"Nothing to do. Ordering is correct already.\n"
"\n"
msgstr ""

#: fdisks/fdisk.c:1236
#, fuzzy, c-format
msgid "Done.\n"
msgstr "完成\n"

#: fdisks/fdisk.c:1264
#, c-format
msgid ""
"This doesn't look like a partition table\n"
"Probably you selected the wrong device.\n"
"\n"
msgstr ""

#: fdisks/fdisk.c:1277
#, c-format
msgid "%*s Boot      Start         End      Blocks   Id  System\n"
msgstr ""

#: fdisks/fdisk.c:1278 fdisks/fdisksgilabel.c:191 fdisks/fdisksunlabel.c:564
msgid "Device"
msgstr ""

#: fdisks/fdisk.c:1316
#, c-format
msgid ""
"\n"
"Partition table entries are not in disk order\n"
msgstr ""

#: fdisks/fdisk.c:1326
#, c-format
msgid ""
"\n"
"Disk %s: %d heads, %llu sectors, %llu cylinders\n"
"\n"
msgstr ""

#: fdisks/fdisk.c:1328
#, c-format
msgid "Nr AF  Hd Sec  Cyl  Hd Sec  Cyl     Start      Size ID\n"
msgstr ""

#: fdisks/fdisk.c:1376
#, c-format
msgid "Warning: partition %d contains sector 0\n"
msgstr ""

#: fdisks/fdisk.c:1379
#, c-format
msgid "Partition %d: head %d greater than maximum %d\n"
msgstr ""

#: fdisks/fdisk.c:1382
#, c-format
msgid "Partition %d: sector %d greater than maximum %llu\n"
msgstr ""

#: fdisks/fdisk.c:1385
#, c-format
msgid "Partitions %d: cylinder %d greater than maximum %llu\n"
msgstr ""

#: fdisks/fdisk.c:1389
#, c-format
msgid "Partition %d: previous sectors %d disagrees with total %d\n"
msgstr ""

#: fdisks/fdisk.c:1422
#, c-format
msgid "Warning: bad start-of-data in partition %d\n"
msgstr ""

#: fdisks/fdisk.c:1430
#, c-format
msgid "Warning: partition %d overlaps partition %d.\n"
msgstr ""

#: fdisks/fdisk.c:1450
#, c-format
msgid "Warning: partition %d is empty\n"
msgstr ""

#: fdisks/fdisk.c:1455
#, c-format
msgid "Logical partition %d not entirely in partition %d\n"
msgstr ""

#: fdisks/fdisk.c:1461
#, c-format
msgid "Total allocated sectors %llu greater than the maximum %llu\n"
msgstr ""

#: fdisks/fdisk.c:1464
#, c-format
msgid "Remaining %lld unallocated %ld-byte sectors\n"
msgstr ""

#: fdisks/fdisk.c:1473
#, c-format
msgid "Partition %d of type %s and of size %s is set\n"
msgstr ""

#: fdisks/fdisk.c:1493
#, c-format
msgid ""
"\tSorry - this fdisk cannot handle AIX disk labels.\n"
"\tIf you want to add DOS-type partitions, create\n"
"\ta new empty DOS partition table first. (Use o.)\n"
"\tWARNING: This will destroy the present disk contents.\n"
msgstr ""

#: fdisks/fdisk.c:1502
#, c-format
msgid ""
"\tSorry - this fdisk cannot handle Mac disk labels.\n"
"\tIf you want to add DOS-type partitions, create\n"
"\ta new empty DOS partition table first. (Use o.)\n"
"\tWARNING: This will destroy the present disk contents.\n"
msgstr ""

#: fdisks/fdisk.c:1533
#, c-format
msgid ""
"The partition table has been altered!\n"
"\n"
msgstr ""

#: fdisks/fdisk.c:1546
#, c-format
msgid "Calling ioctl() to re-read partition table.\n"
msgstr ""

#: fdisks/fdisk.c:1555
#, c-format
msgid ""
"\n"
"WARNING: Re-reading the partition table failed with error %d: %m.\n"
"The kernel still uses the old table. The new table will be used at\n"
"the next reboot or after you run partprobe(8) or kpartx(8)\n"
msgstr ""

#: fdisks/fdisk.c:1563
#, c-format
msgid ""
"\n"
"WARNING: If you have created or modified any DOS 6.x\n"
"partitions, please see the fdisk manual page for additional\n"
"information.\n"
msgstr ""

#: fdisks/fdisk.c:1569
#, c-format
msgid ""
"\n"
"Error closing file\n"
msgstr ""

#: fdisks/fdisk.c:1573
#, c-format
msgid "Syncing disks.\n"
msgstr ""

#: fdisks/fdisk.c:1619
#, c-format
msgid "Partition %d has no data area\n"
msgstr ""

#: fdisks/fdisk.c:1648
msgid "New beginning of data"
msgstr ""

#: fdisks/fdisk.c:1672
msgid "Expert command (m for help): "
msgstr ""

#: fdisks/fdisk.c:1685
msgid "Number of cylinders"
msgstr ""

#: fdisks/fdisk.c:1710
msgid "Number of heads"
msgstr ""

#: fdisks/fdisk.c:1735
msgid "Number of sectors"
msgstr ""

#: fdisks/fdisk.c:1737
#, c-format
msgid "Warning: setting sector offset for DOS compatiblity\n"
msgstr ""

#: fdisks/fdisk.c:1775
#, c-format
msgid ""
"\n"
"WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't "
"support GPT. Use GNU Parted.\n"
"\n"
msgstr ""

#: fdisks/fdisk.c:1786 fdisks/fdisk.c:1973 fdisks/fdisk.c:2086
#, c-format
msgid "unable to open %s"
msgstr ""

#: fdisks/fdisk.c:1828 fdisks/sfdisk.c:2732
#, c-format
msgid "cannot open %s\n"
msgstr ""

#: fdisks/fdisk.c:1851
#, c-format
msgid "%c: unknown command\n"
msgstr ""

#: fdisks/fdisk.c:1856
#, c-format
msgid ""
"Welcome to fdisk (%s).\n"
"\n"
"Changes will remain in memory only, until you decide to write them.\n"
"Be careful before using the write command.\n"
"\n"
msgstr ""

#: fdisks/fdisk.c:1870
#, c-format
msgid "Detected an OSF/1 disklabel on %s, entering disklabel mode.\n"
msgstr ""

#: fdisks/fdisk.c:1880
msgid "Command (m for help): "
msgstr ""

#: fdisks/fdisk.c:2000
#, fuzzy
msgid "invalid sector size argument"
msgstr "不能读 inodes"

#: fdisks/fdisk.c:2007 fdisks/sfdisk.c:2647
#, fuzzy
msgid "invalid cylinders argument"
msgstr "不能读 inodes"

#: fdisks/fdisk.c:2018 fdisks/sfdisk.c:2656
#, fuzzy
msgid "invalid heads argument"
msgstr "不能读 inodes"

#: fdisks/fdisk.c:2023 fdisks/sfdisk.c:2674
#, fuzzy
msgid "invalid sectors argument"
msgstr "不能读 inodes"

#: fdisks/fdisk.c:2054
#, c-format
msgid ""
"Warning: the -b (set sector size) option should be used with one specified "
"device\n"
msgstr ""

#: fdisks/fdisk.c:2107
#, c-format
msgid "Note: sector size is %ld (not %d)\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:53
#, c-format
msgid "All primary partitions have been defined already!\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:136
#, c-format
msgid "Bad offset in primary extended partition\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:150
#, c-format
msgid ""
"Warning: omitting partitions after #%d.\n"
"They will be deleted if you save this partition table.\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:169
#, c-format
msgid "Warning: extra link pointer in partition table %d\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:177
#, c-format
msgid "Warning: ignoring extra data in partition table %d\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:210
#, c-format
msgid "omitting empty partition (%d)\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:219
#, c-format
msgid "Disk identifier: 0x%08x\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:229
#, c-format
msgid "Building a new DOS disklabel with disk identifier 0x%08x.\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:249
#, c-format
msgid "New disk identifier (current 0x%08x): "
msgstr ""

#: fdisks/fdiskdoslabel.c:333
#, c-format
msgid "Ignoring extra extended partition %d\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:345
#, c-format
msgid ""
"Warning: invalid flag 0x%04x of partition table %d will be corrected by w"
"(rite)\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:444 fdisks/fdisksgilabel.c:659
#: fdisks/fdisksunlabel.c:376
#, c-format
msgid "Partition %d is already defined.  Delete it before re-adding it.\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:490
#, c-format
msgid "Sector %llu is already allocated\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:526
#, c-format
msgid "No free sectors available\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:537
#, c-format
msgid "Last %1$s, +%2$s or +size{K,M,G}"
msgstr ""

#: fdisks/fdiskdoslabel.c:592
#, c-format
msgid "Adding logical partition %d\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:614
#, c-format
msgid "All primary partitions are in use\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:617
#, c-format
msgid ""
"If you want to create more than four partitions, you must replace a\n"
"primary partition with an extended partition first.\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:620
#, c-format
msgid "All logical partitions are in use\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:621
#, c-format
msgid "Adding a primary partition\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:628
#, c-format
msgid ""
"Partition type:\n"
"   p   primary (%d primary, %d extended, %d free)\n"
"%s\n"
"Select (default %c): "
msgstr ""

#: fdisks/fdiskdoslabel.c:633
msgid "   l   logical (numbered from 5)"
msgstr ""

#: fdisks/fdiskdoslabel.c:633
msgid "   e   extended"
msgstr ""

#: fdisks/fdiskdoslabel.c:639
#, c-format
msgid "Using default response %c\n"
msgstr ""

#: fdisks/fdiskdoslabel.c:655
#, fuzzy, c-format
msgid "Invalid partition type `%c'\n"
msgstr "重新读取分区表"

#: fdisks/fdiskmaclabel.c:30
msgid ""
"\n"
"\tThere is a valid Mac label on this disk.\n"
"\tUnfortunately fdisk(1) cannot handle these disks.\n"
"\tUse either pdisk or parted to modify the partition table.\n"
"\tNevertheless some advice:\n"
"\t1. fdisk will destroy its contents on write.\n"
"\t2. Be sure that this disk is NOT a still vital\n"
"\t   part of a volume group. (Otherwise you may\n"
"\t   erase the other disks as well, if unmirrored.)\n"
msgstr ""

#: fdisks/fdisksgilabel.c:88
msgid "SGI volhdr"
msgstr ""

#: fdisks/fdisksgilabel.c:89
msgid "SGI trkrepl"
msgstr ""

#: fdisks/fdisksgilabel.c:90
msgid "SGI secrepl"
msgstr ""

#: fdisks/fdisksgilabel.c:91
msgid "SGI raw"
msgstr ""

#: fdisks/fdisksgilabel.c:92
msgid "SGI bsd"
msgstr ""

#: fdisks/fdisksgilabel.c:93
msgid "SGI sysv"
msgstr ""

#: fdisks/fdisksgilabel.c:94
msgid "SGI volume"
msgstr ""

#: fdisks/fdisksgilabel.c:95
msgid "SGI efs"
msgstr ""

#: fdisks/fdisksgilabel.c:96
msgid "SGI lvol"
msgstr ""

#: fdisks/fdisksgilabel.c:97
msgid "SGI rlvol"
msgstr ""

#: fdisks/fdisksgilabel.c:98
msgid "SGI xfs"
msgstr ""

#: fdisks/fdisksgilabel.c:99
msgid "SGI xfslog"
msgstr ""

#: fdisks/fdisksgilabel.c:100
msgid "SGI xlv"
msgstr ""

#: fdisks/fdisksgilabel.c:101
msgid "SGI xvm"
msgstr ""

#: fdisks/fdisksgilabel.c:102 fdisks/fdisksunlabel.c:43
msgid "Linux swap"
msgstr ""

#: fdisks/fdisksgilabel.c:103 fdisks/fdisksunlabel.c:44
msgid "Linux native"
msgstr ""

#: fdisks/fdisksgilabel.c:104 fdisks/fdisksunlabel.c:45
#: fdisks/i386_sys_types.c:64
msgid "Linux LVM"
msgstr ""

#: fdisks/fdisksgilabel.c:105
msgid "Linux RAID"
msgstr ""

#: fdisks/fdisksgilabel.c:134
#, c-format
msgid ""
"According to MIPS Computer Systems, Inc the Label must not contain more than "
"512 bytes\n"
msgstr ""

#: fdisks/fdisksgilabel.c:152
#, c-format
msgid "Detected sgi disklabel with wrong checksum.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:170
#, c-format
msgid ""
"\n"
"Disk %s (SGI disk label): %d heads, %llu sectors\n"
"%llu cylinders, %d physical cylinders\n"
"%d extra sects/cyl, interleave %d:1\n"
"%s\n"
"Units = %s of %d * %ld bytes\n"
"\n"
msgstr ""

#: fdisks/fdisksgilabel.c:182
#, c-format
msgid ""
"\n"
"Disk %s (SGI disk label): %d heads, %llu sectors, %llu cylinders\n"
"Units = %s of %d * %ld bytes\n"
"\n"
msgstr ""

#: fdisks/fdisksgilabel.c:189
#, c-format
msgid ""
"----- partitions -----\n"
"Pt# %*s  Info     Start       End   Sectors  Id  System\n"
msgstr ""

#: fdisks/fdisksgilabel.c:211
#, c-format
msgid ""
"----- Bootinfo -----\n"
"Bootfile: %s\n"
"----- Directory Entries -----\n"
msgstr ""

#: fdisks/fdisksgilabel.c:219
#, c-format
msgid "%2d: %-10s sector%5u size%8u\n"
msgstr ""

#: fdisks/fdisksgilabel.c:273
#, c-format
msgid ""
"\n"
"Invalid Bootfile!\n"
"\tThe bootfile must be an absolute non-zero pathname,\n"
"\te.g. \"/unix\" or \"/unix.save\".\n"
msgstr ""

#: fdisks/fdisksgilabel.c:279
#, c-format
msgid ""
"\n"
"\tName of Bootfile too long:  16 bytes maximum.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:284
#, c-format
msgid ""
"\n"
"\tBootfile must have a fully qualified pathname.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:291
#, c-format
msgid ""
"\n"
"\tBe aware, that the bootfile is not checked for existence.\n"
"\tSGI's default is \"/unix\" and for backup \"/unix.save\".\n"
msgstr ""

#: fdisks/fdisksgilabel.c:302
#, c-format
msgid ""
"\n"
"The current boot file is: %s\n"
msgstr ""

#: fdisks/fdisksgilabel.c:303
msgid "Please enter the name of the new boot file: "
msgstr ""

#: fdisks/fdisksgilabel.c:304
#, c-format
msgid "Boot file unchanged\n"
msgstr ""

#: fdisks/fdisksgilabel.c:318
#, c-format
msgid ""
"\n"
"\tBootfile is changed to \"%s\".\n"
msgstr ""

#: fdisks/fdisksgilabel.c:457
#, c-format
msgid "More than one entire disk entry present.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:464 fdisks/fdisksunlabel.c:347
#, c-format
msgid "No partitions defined\n"
msgstr ""

#: fdisks/fdisksgilabel.c:472
#, c-format
msgid "IRIX likes when Partition 11 covers the entire disk.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:474
#, c-format
msgid ""
"The entire disk partition should start at block 0,\n"
"not at diskblock %d.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:480
#, c-format
msgid ""
"The entire disk partition is only %d diskblock large,\n"
"but the disk is %d diskblocks long.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:486
#, c-format
msgid "Partition 11 should cover the entire disk.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:496
#, c-format
msgid "Partition %d does not start on cylinder boundary.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:502
#, c-format
msgid "Partition %d does not end on cylinder boundary.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:509
#, c-format
msgid "The Partition %d and %d overlap by %d sectors.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:517 fdisks/fdisksgilabel.c:538
#, c-format
msgid "Unused gap of %8u sectors - sectors %8u-%u\n"
msgstr ""

#: fdisks/fdisksgilabel.c:549
#, c-format
msgid ""
"\n"
"The boot partition does not exist.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:552
#, c-format
msgid ""
"\n"
"The swap partition does not exist.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:556
#, c-format
msgid ""
"\n"
"The swap partition has no swap type.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:559
#, c-format
msgid "\tYou have chosen an unusual boot file name.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:568
#, c-format
msgid "Sorry, only for non-empty partitions you can change the tag.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:574
msgid ""
"It is highly recommended that the partition at offset 0\n"
"is of type \"SGI volhdr\", the IRIX system will rely on it to\n"
"retrieve from its directory standalone tools like sash and fx.\n"
"Only the \"SGI volume\" entire disk section may violate this.\n"
"Type YES if you are sure about tagging this partition differently.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:579 fdisks/fdisksunlabel.c:515
msgid "YES\n"
msgstr ""

#: fdisks/fdisksgilabel.c:605
#, c-format
msgid "Partition overlap on the disk.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:665
#, c-format
msgid "Attempting to generate entire disk entry automatically.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:670
#, c-format
msgid "The entire disk is already covered with partitions.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:674
#, c-format
msgid "You got a partition overlap on the disk. Fix it first!\n"
msgstr ""

#: fdisks/fdisksgilabel.c:683 fdisks/fdisksgilabel.c:712
#, c-format
msgid ""
"It is highly recommended that eleventh partition\n"
"covers the entire disk and is of type `SGI volume'\n"
msgstr ""

#: fdisks/fdisksgilabel.c:699
#, c-format
msgid "You will get a partition overlap on the disk. Fix it first!\n"
msgstr ""

#: fdisks/fdisksgilabel.c:704
#, c-format
msgid " Last %s"
msgstr ""

#: fdisks/fdisksgilabel.c:734
#, c-format
msgid "Building a new SGI disklabel.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:742
#, c-format
msgid "HDIO_GETGEO ioctl failed on %s"
msgstr ""

#: fdisks/fdisksgilabel.c:757 fdisks/fdisksunlabel.c:185
#, c-format
msgid ""
"Warning:  BLKGETSIZE ioctl failed on %s.  Using geometry cylinder value of "
"%llu.\n"
"This value may be truncated for devices > 33.8 GB.\n"
msgstr ""

#: fdisks/fdisksgilabel.c:771
#, c-format
msgid "ID=%02x\tSTART=%d\tLENGTH=%d\n"
msgstr ""

#: fdisks/fdisksgilabel.c:779
#, c-format
msgid "Trying to keep parameters of partitions already set.\n"
msgstr ""

#: fdisks/fdisksunlabel.c:31
msgid "Unassigned"
msgstr ""

#: fdisks/fdisksunlabel.c:33
msgid "SunOS root"
msgstr ""

#: fdisks/fdisksunlabel.c:34
msgid "SunOS swap"
msgstr ""

#: fdisks/fdisksunlabel.c:35
msgid "SunOS usr"
msgstr ""

#: fdisks/fdisksunlabel.c:36
msgid "Whole disk"
msgstr ""

#: fdisks/fdisksunlabel.c:37
msgid "SunOS stand"
msgstr ""

#: fdisks/fdisksunlabel.c:38
msgid "SunOS var"
msgstr ""

#: fdisks/fdisksunlabel.c:39
msgid "SunOS home"
msgstr ""

#: fdisks/fdisksunlabel.c:40
msgid "SunOS alt sectors"
msgstr ""

#: fdisks/fdisksunlabel.c:41
msgid "SunOS cachefs"
msgstr ""

#: fdisks/fdisksunlabel.c:42
msgid "SunOS reserved"
msgstr ""

#: fdisks/fdisksunlabel.c:46 fdisks/i386_sys_types.c:104
msgid "Linux raid autodetect"
msgstr ""

#: fdisks/fdisksunlabel.c:100
#, c-format
msgid ""
"Detected sun disklabel with wrong checksum.\n"
"Probably you'll have to set all the values,\n"
"e.g. heads, sectors, cylinders and partitions\n"
"or force a fresh label (s command in main menu)\n"
msgstr ""

#: fdisks/fdisksunlabel.c:112
#, c-format
msgid "Detected sun disklabel with wrong version [0x%08x].\n"
msgstr ""

#: fdisks/fdisksunlabel.c:117
#, c-format
msgid "Detected sun disklabel with wrong sanity [0x%08x].\n"
msgstr ""

#: fdisks/fdisksunlabel.c:122
#, c-format
msgid "Detected sun disklabel with wrong num_partitions [%u].\n"
msgstr ""

#: fdisks/fdisksunlabel.c:127
#, c-format
msgid ""
"Warning: Wrong values need to be fixed up and will be corrected by w(rite)\n"
msgstr ""

#: fdisks/fdisksunlabel.c:155
#, c-format
msgid "Building a new Sun disklabel.\n"
msgstr ""

#: fdisks/fdisksunlabel.c:194
msgid "Sectors/track"
msgstr ""

#: fdisks/fdisksunlabel.c:309
#, c-format
msgid "Partition %d doesn't end on cylinder boundary\n"
msgstr ""

#: fdisks/fdisksunlabel.c:329
#, c-format
msgid "Partition %d overlaps with others in sectors %d-%d\n"
msgstr ""

#: fdisks/fdisksunlabel.c:352
#, c-format
msgid "Unused gap - sectors 0-%d\n"
msgstr ""

#: fdisks/fdisksunlabel.c:354 fdisks/fdisksunlabel.c:360
#, c-format
msgid "Unused gap - sectors %d-%d\n"
msgstr ""

#: fdisks/fdisksunlabel.c:387
#, c-format
msgid ""
"Other partitions already cover the whole disk.\n"
"Delete some/shrink them before retry.\n"
msgstr ""

#: fdisks/fdisksunlabel.c:410
#, c-format
msgid ""
"It is highly recommended that the third partition covers the whole disk\n"
"and is of type `Whole disk'\n"
msgstr ""

#: fdisks/fdisksunlabel.c:438
#, c-format
msgid "Sector %d is already allocated\n"
msgstr ""

#: fdisks/fdisksunlabel.c:468
#, c-format
msgid ""
"You haven't covered the whole disk with the 3rd partition, but your value\n"
"%d %s covers some other partition. Your entry has been changed\n"
"to %d %s\n"
msgstr ""

#: fdisks/fdisksunlabel.c:495
#, c-format
msgid ""
"If you want to maintain SunOS/Solaris compatibility, consider leaving this\n"
"partition as Whole disk (5), starting at 0, with %u sectors\n"
msgstr ""

#: fdisks/fdisksunlabel.c:510
msgid ""
"It is highly recommended that the partition at offset 0\n"
"is UFS, EXT2FS filesystem or SunOS swap. Putting Linux swap\n"
"there may destroy your partition table and bootblock.\n"
"Type YES if you're very sure you would like that partition\n"
"tagged with 82 (Linux swap): "
msgstr ""

#: fdisks/fdisksunlabel.c:542
#, c-format
msgid ""
"\n"
"Disk %s (Sun disk label): %u heads, %llu sectors, %d rpm\n"
"%llu cylinders, %d alternate cylinders, %d physical cylinders\n"
"%d extra sects/cyl, interleave %d:1\n"
"Label ID: %s\n"
"Volume ID: %s\n"
"Units = %s of %d * 512 bytes\n"
"\n"
msgstr ""

#: fdisks/fdisksunlabel.c:558
#, c-format
msgid ""
"\n"
"Disk %s (Sun disk label): %u heads, %llu sectors, %llu cylinders\n"
"Units = %s of %d * 512 bytes\n"
"\n"
msgstr ""

#: fdisks/fdisksunlabel.c:563
#, c-format
msgid "%*s Flag    Start       End    Blocks   Id  System\n"
msgstr ""

#: fdisks/fdisksunlabel.c:591
msgid "Number of alternate cylinders"
msgstr ""

#: fdisks/fdisksunlabel.c:603
msgid "Extra sectors per cylinder"
msgstr ""

#: fdisks/fdisksunlabel.c:610
msgid "Interleave factor"
msgstr ""

#: fdisks/fdisksunlabel.c:617
msgid "Rotation speed (rpm)"
msgstr ""

#: fdisks/fdisksunlabel.c:624
msgid "Number of physical cylinders"
msgstr ""

#: fdisks/i386_sys_types.c:6
msgid "Empty"
msgstr ""

#: fdisks/i386_sys_types.c:7
msgid "FAT12"
msgstr ""

#: fdisks/i386_sys_types.c:8
msgid "XENIX root"
msgstr ""

#: fdisks/i386_sys_types.c:9
msgid "XENIX usr"
msgstr ""

#: fdisks/i386_sys_types.c:10
msgid "FAT16 <32M"
msgstr ""

#: fdisks/i386_sys_types.c:11
msgid "Extended"
msgstr ""

#: fdisks/i386_sys_types.c:12
msgid "FAT16"
msgstr ""

#: fdisks/i386_sys_types.c:13
msgid "HPFS/NTFS/exFAT"
msgstr ""

#: fdisks/i386_sys_types.c:14
msgid "AIX"
msgstr ""

#: fdisks/i386_sys_types.c:15
msgid "AIX bootable"
msgstr ""

#: fdisks/i386_sys_types.c:16
msgid "OS/2 Boot Manager"
msgstr ""

#: fdisks/i386_sys_types.c:17
msgid "W95 FAT32"
msgstr ""

#: fdisks/i386_sys_types.c:18
msgid "W95 FAT32 (LBA)"
msgstr ""

#: fdisks/i386_sys_types.c:19
msgid "W95 FAT16 (LBA)"
msgstr ""

#: fdisks/i386_sys_types.c:20
msgid "W95 Ext'd (LBA)"
msgstr ""

#: fdisks/i386_sys_types.c:21
msgid "OPUS"
msgstr ""

#: fdisks/i386_sys_types.c:22
msgid "Hidden FAT12"
msgstr ""

#: fdisks/i386_sys_types.c:23
msgid "Compaq diagnostics"
msgstr ""

#: fdisks/i386_sys_types.c:24
msgid "Hidden FAT16 <32M"
msgstr ""

#: fdisks/i386_sys_types.c:25
msgid "Hidden FAT16"
msgstr ""

#: fdisks/i386_sys_types.c:26
msgid "Hidden HPFS/NTFS"
msgstr ""

#: fdisks/i386_sys_types.c:27
msgid "AST SmartSleep"
msgstr ""

#: fdisks/i386_sys_types.c:28
msgid "Hidden W95 FAT32"
msgstr ""

#: fdisks/i386_sys_types.c:29
msgid "Hidden W95 FAT32 (LBA)"
msgstr ""

#: fdisks/i386_sys_types.c:30
msgid "Hidden W95 FAT16 (LBA)"
msgstr ""

#: fdisks/i386_sys_types.c:31
msgid "NEC DOS"
msgstr ""

#: fdisks/i386_sys_types.c:32
msgid "Hidden NTFS WinRE"
msgstr ""

#: fdisks/i386_sys_types.c:33
msgid "Plan 9"
msgstr ""

#: fdisks/i386_sys_types.c:34
msgid "PartitionMagic recovery"
msgstr ""

#: fdisks/i386_sys_types.c:35
msgid "Venix 80286"
msgstr ""

#: fdisks/i386_sys_types.c:36
msgid "PPC PReP Boot"
msgstr ""

#: fdisks/i386_sys_types.c:37
msgid "SFS"
msgstr ""

#: fdisks/i386_sys_types.c:38
msgid "QNX4.x"
msgstr ""

#: fdisks/i386_sys_types.c:39
msgid "QNX4.x 2nd part"
msgstr ""

#: fdisks/i386_sys_types.c:40
msgid "QNX4.x 3rd part"
msgstr ""

#: fdisks/i386_sys_types.c:41
msgid "OnTrack DM"
msgstr ""

#: fdisks/i386_sys_types.c:42
msgid "OnTrack DM6 Aux1"
msgstr ""

#: fdisks/i386_sys_types.c:43
msgid "CP/M"
msgstr ""

#: fdisks/i386_sys_types.c:44
msgid "OnTrack DM6 Aux3"
msgstr ""

#: fdisks/i386_sys_types.c:45
msgid "OnTrackDM6"
msgstr ""

#: fdisks/i386_sys_types.c:46
msgid "EZ-Drive"
msgstr ""

#: fdisks/i386_sys_types.c:47
msgid "Golden Bow"
msgstr ""

#: fdisks/i386_sys_types.c:48
msgid "Priam Edisk"
msgstr ""

#: fdisks/i386_sys_types.c:49 fdisks/i386_sys_types.c:93
#: fdisks/i386_sys_types.c:99 fdisks/i386_sys_types.c:100
msgid "SpeedStor"
msgstr ""

#: fdisks/i386_sys_types.c:50
msgid "GNU HURD or SysV"
msgstr ""

#: fdisks/i386_sys_types.c:51
msgid "Novell Netware 286"
msgstr ""

#: fdisks/i386_sys_types.c:52
msgid "Novell Netware 386"
msgstr ""

#: fdisks/i386_sys_types.c:53
msgid "DiskSecure Multi-Boot"
msgstr ""

#: fdisks/i386_sys_types.c:54
msgid "PC/IX"
msgstr ""

#: fdisks/i386_sys_types.c:55
msgid "Old Minix"
msgstr ""

#: fdisks/i386_sys_types.c:56
msgid "Minix / old Linux"
msgstr ""

#: fdisks/i386_sys_types.c:57
msgid "Linux swap / Solaris"
msgstr ""

#: fdisks/i386_sys_types.c:58
msgid "Linux"
msgstr ""

#: fdisks/i386_sys_types.c:59
msgid "OS/2 hidden C: drive"
msgstr ""

#: fdisks/i386_sys_types.c:60
msgid "Linux extended"
msgstr ""

#: fdisks/i386_sys_types.c:61 fdisks/i386_sys_types.c:62
msgid "NTFS volume set"
msgstr ""

#: fdisks/i386_sys_types.c:63
msgid "Linux plaintext"
msgstr ""

#: fdisks/i386_sys_types.c:65
msgid "Amoeba"
msgstr ""

#: fdisks/i386_sys_types.c:66
msgid "Amoeba BBT"
msgstr ""

#: fdisks/i386_sys_types.c:67
msgid "BSD/OS"
msgstr ""

#: fdisks/i386_sys_types.c:68
msgid "IBM Thinkpad hibernation"
msgstr ""

#: fdisks/i386_sys_types.c:69
msgid "FreeBSD"
msgstr ""

#: fdisks/i386_sys_types.c:70
msgid "OpenBSD"
msgstr ""

#: fdisks/i386_sys_types.c:71
msgid "NeXTSTEP"
msgstr ""

#: fdisks/i386_sys_types.c:72
msgid "Darwin UFS"
msgstr ""

#: fdisks/i386_sys_types.c:73
msgid "NetBSD"
msgstr ""

#: fdisks/i386_sys_types.c:74
msgid "Darwin boot"
msgstr ""

#: fdisks/i386_sys_types.c:75
msgid "HFS / HFS+"
msgstr ""

#: fdisks/i386_sys_types.c:76
msgid "BSDI fs"
msgstr ""

#: fdisks/i386_sys_types.c:77
msgid "BSDI swap"
msgstr ""

#: fdisks/i386_sys_types.c:78
msgid "Boot Wizard hidden"
msgstr ""

#: fdisks/i386_sys_types.c:79
msgid "Solaris boot"
msgstr ""

#: fdisks/i386_sys_types.c:80
msgid "Solaris"
msgstr ""

#: fdisks/i386_sys_types.c:81
msgid "DRDOS/sec (FAT-12)"
msgstr ""

#: fdisks/i386_sys_types.c:82
msgid "DRDOS/sec (FAT-16 < 32M)"
msgstr ""

#: fdisks/i386_sys_types.c:83
msgid "DRDOS/sec (FAT-16)"
msgstr ""

#: fdisks/i386_sys_types.c:84
msgid "Syrinx"
msgstr ""

#: fdisks/i386_sys_types.c:85
msgid "Non-FS data"
msgstr ""

#: fdisks/i386_sys_types.c:86
msgid "CP/M / CTOS / ..."
msgstr ""

#: fdisks/i386_sys_types.c:88
msgid "Dell Utility"
msgstr ""

#: fdisks/i386_sys_types.c:89
msgid "BootIt"
msgstr ""

#: fdisks/i386_sys_types.c:90
msgid "DOS access"
msgstr ""

#: fdisks/i386_sys_types.c:92
msgid "DOS R/O"
msgstr ""

#: fdisks/i386_sys_types.c:95
msgid "BeOS fs"
msgstr ""

#: fdisks/i386_sys_types.c:96
msgid "GPT"
msgstr ""

#: fdisks/i386_sys_types.c:97
msgid "EFI (FAT-12/16/32)"
msgstr ""

#: fdisks/i386_sys_types.c:98
msgid "Linux/PA-RISC boot"
msgstr ""

#: fdisks/i386_sys_types.c:101
msgid "DOS secondary"
msgstr ""

#: fdisks/i386_sys_types.c:102
msgid "VMware VMFS"
msgstr ""

#: fdisks/i386_sys_types.c:103
msgid "VMware VMKCORE"
msgstr ""

#: fdisks/i386_sys_types.c:107
msgid "LANstep"
msgstr ""

#: fdisks/i386_sys_types.c:108
msgid "BBT"
msgstr ""

#: fdisks/sfdisk.c:132
#, c-format
msgid "seek error on %s - cannot seek to %lu\n"
msgstr ""

#: fdisks/sfdisk.c:137
#, c-format
msgid "seek error: wanted 0x%08x%08x, got 0x%08x%08x\n"
msgstr ""

#: fdisks/sfdisk.c:187 fdisks/sfdisk.c:268
#, c-format
msgid "read error on %s - cannot read sector %lu\n"
msgstr ""

#: fdisks/sfdisk.c:218
#, c-format
msgid "write error on %s - cannot write sector %lu\n"
msgstr ""

#: fdisks/sfdisk.c:256
#, c-format
msgid "cannot open partition sector save file (%s)\n"
msgstr ""

#: fdisks/sfdisk.c:274
#, c-format
msgid "write error on %s\n"
msgstr ""

#: fdisks/sfdisk.c:300
#, c-format
msgid "cannot stat partition restore file (%s)\n"
msgstr ""

#: fdisks/sfdisk.c:305
msgid "partition restore file has wrong size - not restoring\n"
msgstr ""

#: fdisks/sfdisk.c:315
#, c-format
msgid "cannot open partition restore file (%s)\n"
msgstr ""

#: fdisks/sfdisk.c:321
#, c-format
msgid "error reading %s\n"
msgstr ""

#: fdisks/sfdisk.c:328
#, c-format
msgid "cannot open device %s for writing\n"
msgstr ""

#: fdisks/sfdisk.c:339
#, c-format
msgid "error writing sector %lu on %s\n"
msgstr ""

#: fdisks/sfdisk.c:407
#, c-format
msgid "Disk %s: cannot get geometry\n"
msgstr ""

#: fdisks/sfdisk.c:424
#, c-format
msgid "Disk %s: cannot get size\n"
msgstr ""

#: fdisks/sfdisk.c:456
#, c-format
msgid ""
"Warning: start=%lu - this looks like a partition rather than\n"
"the entire disk. Using fdisk on it is probably meaningless.\n"
"[Use the --force option if you really want this]\n"
msgstr ""

#: fdisks/sfdisk.c:464
#, c-format
msgid "Warning: HDIO_GETGEO says that there are %lu heads\n"
msgstr ""

#: fdisks/sfdisk.c:467
#, c-format
msgid "Warning: HDIO_GETGEO says that there are %lu sectors\n"
msgstr ""

#: fdisks/sfdisk.c:471
#, c-format
msgid "Warning: BLKGETSIZE/HDIO_GETGEO says that there are %lu cylinders\n"
msgstr ""

#: fdisks/sfdisk.c:476
#, c-format
msgid ""
"Warning: unlikely number of sectors (%lu) - usually at most 63\n"
"This will give problems with all software that uses C/H/S addressing.\n"
msgstr ""

#: fdisks/sfdisk.c:480
#, c-format
msgid ""
"\n"
"Disk %s: %lu cylinders, %lu heads, %lu sectors/track\n"
msgstr ""

#: fdisks/sfdisk.c:566
#, c-format
msgid ""
"%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n"
msgstr ""

#: fdisks/sfdisk.c:571
#, c-format
msgid ""
"%s of partition %s has impossible value for sector: %lu (should be in 1-"
"%lu)\n"
msgstr ""

#: fdisks/sfdisk.c:576
#, c-format
msgid ""
"%s of partition %s has impossible value for cylinders: %lu (should be in 0-"
"%lu)\n"
msgstr ""

#: fdisks/sfdisk.c:616
#, c-format
msgid ""
"Id  Name\n"
"\n"
msgstr ""

#: fdisks/sfdisk.c:775
#, c-format
msgid "Re-reading the partition table ...\n"
msgstr ""

#: fdisks/sfdisk.c:780
msgid ""
"The command to re-read the partition table failed.\n"
"Run partprobe(8), kpartx(8) or reboot your system now,\n"
"before using mkfs\n"
msgstr ""

#: fdisks/sfdisk.c:788
#, c-format
msgid "Error closing %s\n"
msgstr ""

#: fdisks/sfdisk.c:829
#, c-format
msgid "%s: no such partition\n"
msgstr ""

#: fdisks/sfdisk.c:852
msgid "unrecognized format - using sectors\n"
msgstr ""

#: fdisks/sfdisk.c:912
#, c-format
msgid "unimplemented format - using %s\n"
msgstr ""

#: fdisks/sfdisk.c:916
#, c-format
msgid ""
"Units: cylinders of %lu bytes, blocks of 1024 bytes, counting from %d\n"
"\n"
msgstr ""

#: fdisks/sfdisk.c:918
#, c-format
msgid "   Device Boot Start     End   #cyls    #blocks   Id  System\n"
msgstr ""

#: fdisks/sfdisk.c:923
#, c-format
msgid ""
"Units: sectors of 512 bytes, counting from %d\n"
"\n"
msgstr ""

#: fdisks/sfdisk.c:925
#, c-format
msgid "   Device Boot    Start       End   #sectors  Id  System\n"
msgstr ""

#: fdisks/sfdisk.c:928
#, c-format
msgid ""
"Units: blocks of 1024 bytes, counting from %d\n"
"\n"
msgstr ""

#: fdisks/sfdisk.c:930
#, c-format
msgid "   Device Boot   Start       End    #blocks   Id  System\n"
msgstr ""

#: fdisks/sfdisk.c:933
#, c-format
msgid ""
"Units: 1MiB = 1024*1024 bytes, blocks of 1024 bytes, counting from %d\n"
"\n"
msgstr ""

#: fdisks/sfdisk.c:935
#, c-format
msgid "   Device Boot Start   End    MiB    #blocks   Id  System\n"
msgstr ""

#: fdisks/sfdisk.c:1094
#, c-format
msgid "\t\tstart: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr ""

#: fdisks/sfdisk.c:1101
#, c-format
msgid "\t\tend: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr ""

#: fdisks/sfdisk.c:1104
#, c-format
msgid "partition ends on cylinder %ld, beyond the end of the disk\n"
msgstr ""

#: fdisks/sfdisk.c:1115
msgid "No partitions found\n"
msgstr ""

#: fdisks/sfdisk.c:1118
#, c-format
msgid ""
"Warning: The partition table looks like it was made\n"
"  for C/H/S=*/%ld/%ld (instead of %ld/%ld/%ld).\n"
"For this listing I'll assume that geometry.\n"
msgstr ""

#: fdisks/sfdisk.c:1166
#, fuzzy
msgid "no partition table present."
msgstr "重新读取分区表"

#: fdisks/sfdisk.c:1168
#, c-format
msgid "strange, only %d partitions defined."
msgstr ""

#: fdisks/sfdisk.c:1177
#, c-format
msgid "Warning: partition %s has size 0 but is not marked Empty\n"
msgstr ""

#: fdisks/sfdisk.c:1180
#, c-format
msgid "Warning: partition %s has size 0 and is bootable\n"
msgstr ""

#: fdisks/sfdisk.c:1183
#, c-format
msgid "Warning: partition %s has size 0 and nonzero start\n"
msgstr ""

#: fdisks/sfdisk.c:1195
#, c-format
msgid "Warning: partition %s is not contained in partition %s\n"
msgstr ""

#: fdisks/sfdisk.c:1207
#, c-format
msgid "Warning: partitions %s and %s overlap\n"
msgstr ""

#: fdisks/sfdisk.c:1219
#, c-format
msgid ""
"Warning: partition %s contains part of the partition table (sector %llu),\n"
"and will destroy it when filled\n"
msgstr ""

#: fdisks/sfdisk.c:1232
#, c-format
msgid "Warning: partition %s starts at sector 0\n"
msgstr ""

#: fdisks/sfdisk.c:1237
#, c-format
msgid "Warning: partition %s extends past end of disk\n"
msgstr ""

#: fdisks/sfdisk.c:1254
#, c-format
msgid ""
"Warning: partition %s has size %d.%d TB (%llu bytes),\n"
"which is larger than the %llu bytes limit imposed\n"
"by the DOS partition table for %d-byte sectors\n"
msgstr ""

#: fdisks/sfdisk.c:1270
#, c-format
msgid ""
"Warning: partition %s starts at sector %llu (%d.%d TB for %d-byte sectors),\n"
"which exceeds the DOS partition table limit of %llu sectors\n"
msgstr ""

#: fdisks/sfdisk.c:1290
msgid ""
"Among the primary partitions, at most one can be extended\n"
" (although this is not a problem under Linux)\n"
msgstr ""

#: fdisks/sfdisk.c:1310
#, c-format
msgid "Warning: partition %s does not start at a cylinder boundary\n"
msgstr ""

#: fdisks/sfdisk.c:1316
#, c-format
msgid "Warning: partition %s does not end at a cylinder boundary\n"
msgstr ""

#: fdisks/sfdisk.c:1335
msgid ""
"Warning: more than one primary partition is marked bootable (active)\n"
"This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
msgstr ""

#: fdisks/sfdisk.c:1342
msgid ""
"Warning: usually one can boot from primary partitions only\n"
"LILO disregards the `bootable' flag.\n"
msgstr ""

#: fdisks/sfdisk.c:1348
msgid ""
"Warning: no primary partition is marked bootable (active)\n"
"This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
msgstr ""

#: fdisks/sfdisk.c:1362
msgid "start"
msgstr ""

#: fdisks/sfdisk.c:1365
#, c-format
msgid ""
"partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr ""

#: fdisks/sfdisk.c:1371
msgid "end"
msgstr ""

#: fdisks/sfdisk.c:1374
#, c-format
msgid "partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr ""

#: fdisks/sfdisk.c:1377
#, c-format
msgid "partition %s ends on cylinder %ld, beyond the end of the disk\n"
msgstr ""

#: fdisks/sfdisk.c:1402
#, c-format
msgid ""
"Warning: shifted start of the extd partition from %lld to %lld\n"
"(For listing purposes only. Do not change its contents.)\n"
msgstr ""

#: fdisks/sfdisk.c:1407
msgid ""
"Warning: extended partition does not start at a cylinder boundary.\n"
"DOS and Linux will interpret the contents differently.\n"
msgstr ""

#: fdisks/sfdisk.c:1420
#, c-format
msgid "ERROR: sector %lu does not have an msdos signature\n"
msgstr ""

#: fdisks/sfdisk.c:1427 fdisks/sfdisk.c:1504
#, c-format
msgid "too many partitions - ignoring those past nr (%ld)\n"
msgstr ""

#: fdisks/sfdisk.c:1442
msgid "tree of partitions?\n"
msgstr ""

#: fdisks/sfdisk.c:1550
msgid "detected Disk Manager - unable to handle that\n"
msgstr ""

#: fdisks/sfdisk.c:1558
msgid "DM6 signature found - giving up\n"
msgstr ""

#: fdisks/sfdisk.c:1577
msgid "strange..., an extended partition of size 0?\n"
msgstr ""

#: fdisks/sfdisk.c:1584 fdisks/sfdisk.c:1595
msgid "strange..., a BSD partition of size 0?\n"
msgstr ""

#: fdisks/sfdisk.c:1639
#, c-format
msgid " %s: unrecognized partition table type\n"
msgstr ""

#: fdisks/sfdisk.c:1651
msgid "-n flag was given: Nothing changed\n"
msgstr ""

#: fdisks/sfdisk.c:1668
msgid "Failed saving the old sectors - aborting\n"
msgstr ""

#: fdisks/sfdisk.c:1673 fdisks/sfdisk.c:1678
#, c-format
msgid "Failed writing the partition on %s\n"
msgstr ""

#: fdisks/sfdisk.c:1756
msgid "long or incomplete input line - quitting"
msgstr ""

#: fdisks/sfdisk.c:1792
#, c-format
msgid "input error: `=' expected after %s field"
msgstr ""

#: fdisks/sfdisk.c:1799
#, c-format
msgid "input error: unexpected character %c after %s field"
msgstr ""

#: fdisks/sfdisk.c:1805
#, c-format
msgid "unrecognized input: %s"
msgstr ""

#: fdisks/sfdisk.c:1846 fdisks/sfdisk.c:1883
msgid "number too big\n"
msgstr ""

#: fdisks/sfdisk.c:1850 fdisks/sfdisk.c:1887
msgid "trailing junk after number\n"
msgstr ""

#: fdisks/sfdisk.c:2012
msgid "no room for partition descriptor\n"
msgstr ""

#: fdisks/sfdisk.c:2045
msgid "cannot build surrounding extended partition\n"
msgstr ""

#: fdisks/sfdisk.c:2096
msgid "too many input fields\n"
msgstr ""

#: fdisks/sfdisk.c:2130
msgid "No room for more\n"
msgstr ""

#: fdisks/sfdisk.c:2149
msgid "Illegal type\n"
msgstr ""

#: fdisks/sfdisk.c:2183
#, c-format
msgid "Warning: given size (%lu) exceeds max allowable size (%lu)\n"
msgstr ""

#: fdisks/sfdisk.c:2189
msgid "Warning: empty partition\n"
msgstr ""

#: fdisks/sfdisk.c:2203
#, c-format
msgid "Warning: bad partition start (earliest %lu)\n"
msgstr ""

#: fdisks/sfdisk.c:2216
msgid "unrecognized bootable flag - choose - or *\n"
msgstr ""

#: fdisks/sfdisk.c:2233 fdisks/sfdisk.c:2247
msgid "partial c,h,s specification?\n"
msgstr ""

#: fdisks/sfdisk.c:2258
msgid "Extended partition not where expected\n"
msgstr ""

#: fdisks/sfdisk.c:2290
msgid "bad input"
msgstr ""

#: fdisks/sfdisk.c:2313
msgid "too many partitions\n"
msgstr ""

#: fdisks/sfdisk.c:2346
msgid ""
"Input in the following format; absent fields get a default value.\n"
"<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>\n"
"Usually you only need to specify <start> and <size> (and perhaps <type>).\n"
msgstr ""

#: fdisks/sfdisk.c:2366 include/c.h:240 misc-utils/cal.c:784
#: misc-utils/getopt.c:314 misc-utils/logger.c:172 misc-utils/look.c:368
#: misc-utils/mcookie.c:68 misc-utils/namei.c:418 misc-utils/rename.c:65
#: misc-utils/uuidd.c:69 misc-utils/uuidgen.c:34 misc-utils/whereis.c:139
#: misc-utils/wipefs.c:359 sys-utils/dmesg.c:149 sys-utils/fsfreeze.c:41
#: sys-utils/hwclock.c:1380 sys-utils/renice.c:55 term-utils/mesg.c:70
#: term-utils/script.c:130 term-utils/scriptreplay.c:40
#: term-utils/setterm.c:676 term-utils/wall.c:81 term-utils/write.c:79
#, fuzzy
msgid ""
"\n"
"Usage:\n"
msgstr "用法:\n"

#: fdisks/sfdisk.c:2368
#, fuzzy, c-format
msgid " %s [options] <device> [...]\n"
msgstr "用法: %s [ -n ] device\n"

#: fdisks/sfdisk.c:2370 include/c.h:241 misc-utils/cal.c:789
#: misc-utils/getopt.c:322 misc-utils/logger.c:176 misc-utils/look.c:372
#: misc-utils/mcookie.c:72 misc-utils/namei.c:422 misc-utils/rename.c:70
#: misc-utils/uuidd.c:73 misc-utils/uuidgen.c:38 misc-utils/whereis.c:143
#: misc-utils/wipefs.c:363 sys-utils/dmesg.c:153 sys-utils/fsfreeze.c:45
#: sys-utils/hwclock.c:1400 sys-utils/renice.c:62 term-utils/mesg.c:76
#: term-utils/script.c:134 term-utils/scriptreplay.c:45
#: term-utils/setterm.c:680 term-utils/wall.c:85 term-utils/write.c:84
#: text-utils/column.c:92
#, c-format
msgid ""
"\n"
"Options:\n"
msgstr ""

#: fdisks/sfdisk.c:2371
msgid ""
" -s, --show-size           list size of a partition\n"
" -c, --id                  change or print partition Id\n"
"     --change-id           change Id\n"
"     --print-id            print Id\n"
msgstr ""

#: fdisks/sfdisk.c:2375
msgid ""
" -l, --list                list partitions of each device\n"
" -d, --dump                idem, but in a format suitable for later input\n"
" -i, --increment           number cylinders etc. from 1 instead of from 0\n"
" -u, --unit <letter>       units to be used; <letter> can be one of\n"
"                             S (sectors), C (cylinders), B (blocks), or M "
"(MB)\n"
msgstr ""

#: fdisks/sfdisk.c:2380
msgid ""
" -1, --one-only            reserved option that does nothing currently\n"
" -T, --list-types          list the known partition types\n"
" -D, --DOS                 for DOS-compatibility: waste a little space\n"
" -E, --DOS-extended        DOS extended partition compatibility\n"
" -R, --re-read             make the kernel reread the partition table\n"
msgstr ""

#: fdisks/sfdisk.c:2385
msgid ""
" -N <number>               change only the partition with this <number>\n"
" -n                        do not actually write to disk\n"
" -O <file>                 save the sectors that will be overwritten to "
"<file>\n"
" -I <file>                 restore sectors from <file>\n"
msgstr ""

#: fdisks/sfdisk.c:2389
msgid ""
" -V, --verify              check that the listed partitions are reasonable\n"
" -v, --version             display version information and exit\n"
" -h, --help                display this help text and exit\n"
msgstr ""

#: fdisks/sfdisk.c:2393
#, fuzzy
msgid ""
"\n"
"Dangerous options:\n"
msgstr "用法: %s [ -n ] device\n"

#: fdisks/sfdisk.c:2394
msgid ""
" -f, --force               disable all consistency checking\n"
"     --no-reread           do not check whether the partition is in use\n"
" -q, --quiet               suppress warning messages\n"
" -L, --Linux               do not complain about things irrelevant for "
"Linux\n"
msgstr ""

#: fdisks/sfdisk.c:2398
msgid ""
" -g, --show-geometry       print the kernel's idea of the geometry\n"
" -G, --show-pt-geometry    print geometry guessed from the partition table\n"
msgstr ""

#: fdisks/sfdisk.c:2400
msgid ""
" -A, --activate[=<device>] activate bootable flag\n"
" -U, --unhide[=<dev>]      set partition unhidden\n"
" -x, --show-extended       also list extended partitions in the output,\n"
"                             or expect descriptors for them in the input\n"
msgstr ""

#: fdisks/sfdisk.c:2404
msgid ""
"     --leave-last          do not allocate the last cylinder\n"
"     --IBM                 same as --leave-last\n"
msgstr ""

#: fdisks/sfdisk.c:2406
msgid ""
"     --in-order            partitions are in order\n"
"     --not-in-order        partitions are not in order\n"
"     --inside-outer        all logicals inside outermost extended\n"
"     --not-inside-outer    not all logicals inside outermost extended\n"
msgstr ""

#: fdisks/sfdisk.c:2410
msgid ""
"     --nested              every partition is disjoint from all others\n"
"     --chained             like nested, but extended partitions may lie "
"outside\n"
"     --onesector           partitions are mutually disjoint\n"
msgstr ""

#: fdisks/sfdisk.c:2414
msgid ""
"\n"
"Override the detected geometry using:\n"
" -C, --cylinders <number>  set the number of cylinders to use\n"
" -H, --heads <number>      set the number of heads to use\n"
" -S, --sectors <number>    set the number of sectors to use\n"
"\n"
msgstr ""

#: fdisks/sfdisk.c:2424
msgid "Usage:"
msgstr ""

#: fdisks/sfdisk.c:2425
#, c-format
msgid "%s device\t\t list active partitions on device\n"
msgstr ""

#: fdisks/sfdisk.c:2426
#, c-format
msgid "%s device n1 n2 ... activate partitions n1 ..., inactivate the rest\n"
msgstr ""

#: fdisks/sfdisk.c:2428
#, c-format
msgid "%s -An device\t activate partition n, inactivate the other ones\n"
msgstr ""

#: fdisks/sfdisk.c:2537
#, c-format
msgid ""
"\n"
"WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk "
"doesn't support GPT. Use GNU Parted.\n"
"\n"
msgstr ""

#: fdisks/sfdisk.c:2542
#, c-format
msgid "Use the --force flag to overrule this check.\n"
msgstr ""

#: fdisks/sfdisk.c:2582
#, fuzzy
msgid "no command?"
msgstr "%s: 未知命令: %s\n"

#: fdisks/sfdisk.c:2662
#, fuzzy
msgid "invalid number of partitions argument"
msgstr "不能读 inodes"

#: fdisks/sfdisk.c:2752
#, c-format
msgid "total: %llu blocks\n"
msgstr ""

#: fdisks/sfdisk.c:2795
#, fuzzy
msgid "usage: sfdisk --print-id device partition-number"
msgstr "在 write_block 中查找失败"

#: fdisks/sfdisk.c:2797
msgid "usage: sfdisk --change-id device partition-number Id"
msgstr ""

#: fdisks/sfdisk.c:2799
msgid "usage: sfdisk --id device partition-number [Id]"
msgstr ""

#: fdisks/sfdisk.c:2806
msgid "can specify only one device (except with -l or -s)"
msgstr ""

#: fdisks/sfdisk.c:2832
#, fuzzy, c-format
msgid "cannot open %s read-write"
msgstr "%s: 不能打开 %s\n"

#: fdisks/sfdisk.c:2834
#, fuzzy, c-format
msgid "cannot open %s for reading"
msgstr "%s: 不能打开 %s\n"

#: fdisks/sfdisk.c:2878 fdisks/sfdisk.c:2910
#, c-format
msgid "%s: %ld cylinders, %ld heads, %ld sectors/track\n"
msgstr ""

#: fdisks/sfdisk.c:2929
#, fuzzy, c-format
msgid "Cannot get size of %s"
msgstr "%s: 不能打开 %s\n"

#: fdisks/sfdisk.c:3010
#, c-format
msgid "bad active byte: 0x%x instead of 0x80\n"
msgstr ""

#: fdisks/sfdisk.c:3029 fdisks/sfdisk.c:3086 fdisks/sfdisk.c:3119
msgid ""
"Done\n"
"\n"
msgstr ""

#: fdisks/sfdisk.c:3038
#, c-format
msgid ""
"You have %d active primary partitions. This does not matter for LILO,\n"
"but the DOS MBR will only boot a disk with 1 active partition.\n"
msgstr ""

#: fdisks/sfdisk.c:3055
#, c-format
msgid "partition %s has id %x and is not hidden"
msgstr ""

#: fdisks/sfdisk.c:3115
#, c-format
msgid "Bad Id %lx"
msgstr ""

#: fdisks/sfdisk.c:3133
msgid "This disk is currently in use.\n"
msgstr ""

#: fdisks/sfdisk.c:3154
#, fuzzy, c-format
msgid "Fatal error: cannot find %s"
msgstr "%s: 不能打开 %s\n"

#: fdisks/sfdisk.c:3157
#, c-format
msgid "Warning: %s is not a block device\n"
msgstr ""

#: fdisks/sfdisk.c:3163
msgid "Checking that no-one is using this disk right now ...\n"
msgstr ""

#: fdisks/sfdisk.c:3165
msgid ""
"\n"
"This disk is currently in use - repartitioning is probably a bad idea.\n"
"Umount all file systems, and swapoff all swap partitions on this disk.\n"
"Use the --no-reread flag to suppress this check.\n"
msgstr ""

#: fdisks/sfdisk.c:3169
msgid "Use the --force flag to overrule all checks.\n"
msgstr ""

#: fdisks/sfdisk.c:3173
msgid "OK\n"
msgstr ""

#: fdisks/sfdisk.c:3182
#, c-format
msgid "Old situation:\n"
msgstr ""

#: fdisks/sfdisk.c:3186
#, c-format
msgid "Partition %d does not exist, cannot change it"
msgstr ""

#: fdisks/sfdisk.c:3194
#, c-format
msgid "New situation:\n"
msgstr ""

#: fdisks/sfdisk.c:3199
msgid ""
"I don't like these partitions - nothing changed.\n"
"(If you really want this, use the --force option.)"
msgstr ""

#: fdisks/sfdisk.c:3202
msgid "I don't like this - probably you should answer No\n"
msgstr ""

#. TRANSLATORS: sfdisk uses rpmatch which means the answers y and n
#. * should be translated, but that is not the case with q answer.
#: fdisks/sfdisk.c:3209
#, c-format
msgid "Are you satisfied with this? [ynq] "
msgstr ""

#: fdisks/sfdisk.c:3211
#, c-format
msgid "Do you want to write this to disk? [ynq] "
msgstr ""

#: fdisks/sfdisk.c:3214
msgid "Quitting - nothing changed"
msgstr ""

#: fdisks/sfdisk.c:3220
#, c-format
msgid "Please answer one of y,n,q\n"
msgstr ""

#: fdisks/sfdisk.c:3228
#, c-format
msgid ""
"Successfully wrote the new partition table\n"
"\n"
msgstr ""

#: fdisks/sfdisk.c:3236
msgid ""
"If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)\n"
"to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
"(See fdisk(8).)\n"
msgstr ""

#: include/c.h:242 sys-utils/ipcs.c:125 sys-utils/ipcs.c:131
msgid "\n"
msgstr ""

#: include/c.h:243
msgid " -h, --help     display this help and exit\n"
msgstr ""

#: include/c.h:244
msgid " -V, --version  output version information and exit\n"
msgstr ""

#: include/c.h:245
#, c-format
msgid ""
"\n"
"For more details see %s.\n"
msgstr ""

#: include/closestream.h:41 include/closestream.h:43 login-utils/vipw.c:289
#: mount-deprecated/mount_mntent.c:58 sys-utils/rtcwake.c:290
#: term-utils/script.c:288 term-utils/script.c:298 term-utils/script.c:411
#: term-utils/script.c:422 term-utils/script.c:484 term-utils/setterm.c:1118
#: term-utils/wall.c:278
#, fuzzy, c-format
msgid "write error"
msgstr "内部错误"

#: include/optutils.h:30
#, c-format
msgid "options %s are mutually exclusive"
msgstr ""

#: lib/pager.c:105
#, fuzzy, c-format
msgid "waitpid failed (%s)"
msgstr "查找失败"

#: lib/path.c:58 lib/path.c:70
#, fuzzy, c-format
msgid "error: cannot open %s"
msgstr "%s: 不能打开 %s\n"

#: lib/path.c:174 sys-utils/lscpu.c:1116
#, fuzzy
msgid "failed to callocate cpu set"
msgstr "不能为 inodes 分配缓冲区"

#: lib/path.c:178
#, fuzzy, c-format
msgid "failed to parse CPU list %s"
msgstr "不能读 inodes"

#: lib/path.c:181
#, fuzzy, c-format
msgid "failed to parse CPU mask %s"
msgstr "不能读 inodes"

#: login-utils/chfn.c:76 login-utils/chsh.c:64
#, fuzzy, c-format
msgid " %s [options] [username]\n"
msgstr "用法: %s [ -n ] device\n"

#: login-utils/chfn.c:78
msgid " -f, --full-name <full-name>  real name\n"
msgstr ""

#: login-utils/chfn.c:79
msgid " -o, --office <office>        office number\n"
msgstr ""

#: login-utils/chfn.c:80
msgid " -p, --office-phone <phone>   office phone number\n"
msgstr ""

#: login-utils/chfn.c:81
msgid " -h, --home-phone <phone>     home phone number\n"
msgstr ""

#: login-utils/chfn.c:83 login-utils/chsh.c:69
msgid " -u, --help     display this help and exit\n"
msgstr ""

#: login-utils/chfn.c:84 login-utils/chsh.c:70
msgid " -v, --version  output version information and exit\n"
msgstr ""

#: login-utils/chfn.c:121 login-utils/chsh.c:96
#, c-format
msgid "you (user %d) don't exist."
msgstr ""

#: login-utils/chfn.c:126 login-utils/chsh.c:101
#, c-format
msgid "user \"%s\" does not exist."
msgstr ""

#: login-utils/chfn.c:131
msgid "can only change local entries"
msgstr ""

#: login-utils/chfn.c:141
#, c-format
msgid "%s is not authorized to change the finger info of %s"
msgstr ""

#: login-utils/chfn.c:143 login-utils/chsh.c:119
msgid "Unknown user context"
msgstr ""

#: login-utils/chfn.c:149 login-utils/chsh.c:125
#, fuzzy, c-format
msgid "can't set default context for %s"
msgstr "%s: 不能打开 %s\n"

#: login-utils/chfn.c:159
#, c-format
msgid "Changing finger information for %s.\n"
msgstr ""

#: login-utils/chfn.c:196
#, c-format
msgid "Finger information not changed.\n"
msgstr ""

#: login-utils/chfn.c:252 login-utils/chfn.c:329
msgid "Office"
msgstr ""

#: login-utils/chfn.c:256 login-utils/chfn.c:330
msgid "Office Phone"
msgstr ""

#: login-utils/chfn.c:260 login-utils/chfn.c:331
msgid "Home Phone"
msgstr ""

#: login-utils/chfn.c:351 login-utils/chsh.c:265
#, fuzzy
msgid "Aborted."
msgstr "检查失败.\n"

#: login-utils/chfn.c:383
#, c-format
msgid "field %s is too long"
msgstr ""

#: login-utils/chfn.c:385
msgid "field is too long"
msgstr ""

#: login-utils/chfn.c:393
#, fuzzy, c-format
msgid "%s: '%c' is not allowed"
msgstr "%s 已经挂载.\t"

#: login-utils/chfn.c:395 login-utils/chsh.c:309
#, fuzzy, c-format
msgid "'%c' is not allowed"
msgstr "%s 已经挂载.\t"

#: login-utils/chfn.c:401
#, c-format
msgid "%s: control characters are not allowed"
msgstr ""

#: login-utils/chfn.c:404 login-utils/chsh.c:313
msgid "control characters are not allowed"
msgstr ""

#: login-utils/chfn.c:481
#, c-format
msgid "Finger information *NOT* changed.  Try again later.\n"
msgstr ""

#: login-utils/chfn.c:484
#, c-format
msgid "Finger information changed.\n"
msgstr ""

#: login-utils/chsh.c:66
msgid " -s, --shell <shell>  specify login shell\n"
msgstr ""

#: login-utils/chsh.c:67
msgid " -l, --list-shells    print list of shells and exit\n"
msgstr ""

#: login-utils/chsh.c:106
msgid "can only change local entries."
msgstr ""

#: login-utils/chsh.c:118
#, c-format
msgid "%s is not authorized to change the shell of %s"
msgstr ""

#: login-utils/chsh.c:137
msgid ""
"running UID doesn't match UID of user we're altering, shell change denied"
msgstr ""

#: login-utils/chsh.c:142
#, c-format
msgid "your shell is not in %s, shell change denied"
msgstr ""

#: login-utils/chsh.c:148
#, c-format
msgid "Changing shell for %s.\n"
msgstr ""

#: login-utils/chsh.c:182
msgid "New shell"
msgstr ""

#: login-utils/chsh.c:191
msgid "Shell not changed."
msgstr ""

#: login-utils/chsh.c:194
msgid ""
"setpwnam failed\n"
"Shell *NOT* changed.  Try again later."
msgstr ""

#: login-utils/chsh.c:198
#, c-format
msgid "Shell changed.\n"
msgstr ""

#: login-utils/chsh.c:294
msgid "shell must be a full path name"
msgstr ""

#: login-utils/chsh.c:298
#, c-format
msgid "\"%s\" does not exist"
msgstr ""

#: login-utils/chsh.c:302
#, c-format
msgid "\"%s\" is not executable"
msgstr ""

#: login-utils/chsh.c:321
#, fuzzy, c-format
msgid "Warning: \"%s\" is not listed in %s."
msgstr "%s 已经挂载.\t"

#: login-utils/chsh.c:325 login-utils/chsh.c:331
#, c-format
msgid ""
"\"%s\" is not listed in %s.\n"
"Use %s -l to see list."
msgstr ""

#: login-utils/chsh.c:355
msgid "No known shells."
msgstr ""

#: login-utils/islocal.c:87
#, c-format
msgid "Failed to open %s for reading, exiting."
msgstr ""

#: login-utils/last.c:155
msgid "usage: last [-#] [-f file] [-t tty] [-h hostname] [user ...]\n"
msgstr ""

#: login-utils/last.c:252
#, fuzzy, c-format
msgid "%s: mmap failed"
msgstr "%s 失败.\n"

#: login-utils/last.c:312
msgid "  still logged in"
msgstr ""

#: login-utils/last.c:334
#, c-format
msgid ""
"\n"
"wtmp begins %s"
msgstr ""

#: login-utils/last.c:431
#, fuzzy
msgid "gethostname failed"
msgstr "查找失败"

#: login-utils/last.c:477
#, c-format
msgid ""
"\n"
"interrupted %10.10s %5.5s \n"
msgstr ""

#. TRANSLATORS: The standard value for %u is 60.
#: login-utils/login.c:176
#, c-format
msgid "timed out after %u seconds"
msgstr ""

#: login-utils/login.c:284
#, c-format
msgid "FATAL: can't reopen tty: %m"
msgstr ""

#: login-utils/login.c:290
#, c-format
msgid "FATAL: %s is not a terminal"
msgstr ""

#: login-utils/login.c:308
#, c-format
msgid "chown (%s, %lu, %lu) failed: %m"
msgstr ""

#: login-utils/login.c:312
#, c-format
msgid "chmod (%s, %u) failed: %m"
msgstr ""

#: login-utils/login.c:374
msgid "FATAL: bad tty"
msgstr ""

#: login-utils/login.c:404
#, c-format
msgid "FATAL: %s: change permissions failed: %m"
msgstr ""

#: login-utils/login.c:523
#, c-format
msgid "Last login: %.*s "
msgstr ""

#: login-utils/login.c:525
#, c-format
msgid "from %.*s\n"
msgstr ""

#: login-utils/login.c:528
#, c-format
msgid "on %.*s\n"
msgstr ""

#: login-utils/login.c:545
#, fuzzy
msgid "write lastlog failed"
msgstr "查找失败"

#: login-utils/login.c:635
#, c-format
msgid "DIALUP AT %s BY %s"
msgstr ""

#: login-utils/login.c:640
#, c-format
msgid "ROOT LOGIN ON %s FROM %s"
msgstr ""

#: login-utils/login.c:643
#, c-format
msgid "ROOT LOGIN ON %s"
msgstr ""

#: login-utils/login.c:646
#, c-format
msgid "LOGIN ON %s BY %s FROM %s"
msgstr ""

#: login-utils/login.c:649
#, c-format
msgid "LOGIN ON %s BY %s"
msgstr ""

#: login-utils/login.c:710
msgid "login: "
msgstr ""

#: login-utils/login.c:736
#, c-format
msgid "PAM failure, aborting: %s"
msgstr ""

#: login-utils/login.c:737
#, c-format
msgid "Couldn't initialize PAM: %s"
msgstr ""

#: login-utils/login.c:809
#, c-format
msgid "FAILED LOGIN %u FROM %s FOR %s, %s"
msgstr ""

#: login-utils/login.c:817 login-utils/sulogin.c:602
#, c-format
msgid ""
"Login incorrect\n"
"\n"
msgstr ""

#: login-utils/login.c:832
#, c-format
msgid "TOO MANY LOGIN TRIES (%u) FROM %s FOR %s, %s"
msgstr ""

#: login-utils/login.c:838
#, c-format
msgid "FAILED LOGIN SESSION FROM %s FOR %s, %s"
msgstr ""

#: login-utils/login.c:846
#, c-format
msgid ""
"\n"
"Login incorrect\n"
msgstr ""

#: login-utils/login.c:874 login-utils/login.c:1326 login-utils/login.c:1350
msgid ""
"\n"
"Session setup problem, abort."
msgstr ""

#: login-utils/login.c:875
#, c-format
msgid "NULL user name in %s:%d. Abort."
msgstr ""

#: login-utils/login.c:1129
#, c-format
msgid "TIOCSCTTY failed: %m"
msgstr ""

#: login-utils/login.c:1270
#, c-format
msgid "login: -h for super-user only.\n"
msgstr ""

#: login-utils/login.c:1285
#, c-format
msgid "usage: login [ -p ] [ -h host ] [ -H ] [ -f username | username ]\n"
msgstr ""

#: login-utils/login.c:1327
#, c-format
msgid "Invalid user name \"%s\" in %s:%d. Abort."
msgstr ""

#: login-utils/login.c:1349
#, c-format
msgid "groups initialization failed: %m"
msgstr ""

#: login-utils/login.c:1374
#, fuzzy
msgid "setgid() failed"
msgstr "查找失败"

#: login-utils/login.c:1404
#, c-format
msgid "You have new mail.\n"
msgstr ""

#: login-utils/login.c:1406
#, c-format
msgid "You have mail.\n"
msgstr ""

#: login-utils/login.c:1420
msgid "setuid() failed"
msgstr ""

#: login-utils/login.c:1426 login-utils/sulogin.c:343
#, fuzzy, c-format
msgid "%s: change directory failed"
msgstr "查找失败"

#: login-utils/login.c:1433 login-utils/sulogin.c:344
#, c-format
msgid "Logging in with home = \"/\".\n"
msgstr ""

#: login-utils/login.c:1462
msgid "couldn't exec shell script"
msgstr ""

#: login-utils/login.c:1464
msgid "no shell"
msgstr ""

#: login-utils/logindefs.c:203
#, c-format
msgid "%s: %s contains invalid numerical value: %s"
msgstr ""

#: login-utils/newgrp.c:101 mount-deprecated/mount.c:1318
#: sys-utils/losetup.c:394 sys-utils/mount.c:122
msgid "Password: "
msgstr ""

#: login-utils/newgrp.c:113
#, c-format
msgid " %s <group>\n"
msgstr ""

#: login-utils/newgrp.c:150
msgid "who are you?"
msgstr ""

#: login-utils/newgrp.c:157 login-utils/newgrp.c:169
#, fuzzy
msgid "setgid failed"
msgstr "查找失败"

#: login-utils/newgrp.c:162 login-utils/newgrp.c:165
msgid "no such group"
msgstr ""

#: login-utils/newgrp.c:171 sys-utils/mount.c:419
msgid "permission denied"
msgstr ""

#: login-utils/newgrp.c:176
#, fuzzy
msgid "setuid failed"
msgstr "查找失败"

#: login-utils/newgrp.c:181 sys-utils/unshare.c:136
#, fuzzy, c-format
msgid "exec %s failed"
msgstr "%s 失败.\n"

#: login-utils/su.c:210
#, fuzzy, c-format
msgid "cannot not open session: %s"
msgstr "%s: 不能打开 %s\n"

#: login-utils/su.c:220
#, fuzzy
msgid "cannot create child process"
msgstr "%s 失败.\n"

#: login-utils/su.c:232
#, fuzzy, c-format
msgid "cannot change directory to %s"
msgstr "不能读 inodes"

#: login-utils/su.c:237
#, fuzzy
msgid "cannot block signals"
msgstr "%s: 不能打开 %s\n"

#: login-utils/su.c:251 login-utils/su.c:259 login-utils/su.c:265
#: sys-utils/cytune.c:170
#, fuzzy
msgid "cannot set signal handler"
msgstr "%s: 不能打开 %s\n"

#: login-utils/su.c:298
#, c-format
msgid ""
"\n"
"Session terminated, killing shell..."
msgstr ""

#: login-utils/su.c:308
#, fuzzy, c-format
msgid " ...killed.\n"
msgstr "%s 失败.\n"

#: login-utils/su.c:366
msgid "incorrect password"
msgstr ""

#: login-utils/su.c:492
#, fuzzy
msgid "failed to set PATH"
msgstr "不能读 inodes"

#: login-utils/su.c:565
#, fuzzy
msgid "cannot set groups"
msgstr "%s: 不能打开 %s\n"

#: login-utils/su.c:580 sys-utils/eject.c:656 sys-utils/unshare.c:129
msgid "cannot set group id"
msgstr ""

#: login-utils/su.c:582 sys-utils/unshare.c:132
#, fuzzy
msgid "cannot set user id"
msgstr "%s: 不能打开 %s\n"

#: login-utils/su.c:654 misc-utils/getopt.c:219
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr ""

#: login-utils/su.c:658
#, c-format
msgid "Usage: %s [OPTION]... [-] [USER [ARG]...]\n"
msgstr ""

#: login-utils/su.c:659
msgid ""
"Change the effective user id and group id to that of USER.\n"
"\n"
"  -, -l, --login               make the shell a login shell\n"
"  -c, --command=COMMAND        pass a single COMMAND to the shell with -c\n"
"  --session-command=COMMAND    pass a single COMMAND to the shell with -c\n"
"                               and do not create a new session\n"
"  -f, --fast                   pass -f to the shell (for csh or tcsh)\n"
"  -m, --preserve-environment   do not reset environment variables\n"
"  -p                           same as -m\n"
"  -s, --shell=SHELL            run SHELL if /etc/shells allows it\n"
"      --help     display this help and exit\n"
"      --version  output version information and exit\n"
"\n"
"A mere - implies -l.   If USER not given, assume root.\n"
msgstr ""

#: login-utils/su.c:759
#, c-format
msgid "user %s does not exist"
msgstr ""

#: login-utils/su.c:790
#, c-format
msgid "using restricted shell %s"
msgstr ""

#: login-utils/su.c:810
#, fuzzy, c-format
msgid "warning: cannot change directory to %s"
msgstr "不能读 inodes"

#: login-utils/sulogin.c:243
#, c-format
msgid "%s: no entry for root\n"
msgstr ""

#: login-utils/sulogin.c:270
#, c-format
msgid "%s: no entry for root"
msgstr ""

#: login-utils/sulogin.c:274
#, c-format
msgid "%s: root password garbled"
msgstr ""

#: login-utils/sulogin.c:293
#, c-format
msgid "Give root password for maintenance\n"
msgstr ""

#: login-utils/sulogin.c:295
#, c-format
msgid "Press enter for maintenance"
msgstr ""

#: login-utils/sulogin.c:296
#, fuzzy, c-format
msgid "(or type Control-D to continue): "
msgstr "你确认要继续"

#: login-utils/sulogin.c:347
#, fuzzy
msgid "change directory to system root failed"
msgstr "查找失败"

#: login-utils/sulogin.c:394
#, fuzzy
msgid "setexeccon failed"
msgstr "查找失败"

#: login-utils/sulogin.c:403 login-utils/sulogin.c:407
#, fuzzy, c-format
msgid "%s: exec failed"
msgstr "查找失败"

#: login-utils/sulogin.c:430
#, fuzzy
msgid "tcgetattr failed"
msgstr "%s 失败.\n"

#: login-utils/sulogin.c:437
#, fuzzy
msgid "tcsetattr failed"
msgstr "%s 失败.\n"

#: login-utils/sulogin.c:444
#, fuzzy, c-format
msgid " %s [options] [tty device]\n"
msgstr "用法: %s [ -n ] device\n"

#: login-utils/sulogin.c:447
msgid ""
" -p, --login-shell        start a login shell\n"
" -t, --timeout <seconds>  max time to wait for a password (default: no "
"limit)\n"
" -e, --force              examine password files directly if getpwnam(3) "
"fails\n"
msgstr ""

#: login-utils/sulogin.c:488 misc-utils/findmnt.c:1196 term-utils/wall.c:128
msgid "invalid timeout argument"
msgstr ""

#: login-utils/sulogin.c:510
msgid "only root can run this program."
msgstr ""

#: login-utils/sulogin.c:529
#, fuzzy, c-format
msgid "%s: not a tty"
msgstr "根 inode 不是一个目录"

#: login-utils/sulogin.c:577
#, fuzzy
msgid "TIOCSCTTY: ioctl failed"
msgstr "%s 失败.\n"

#: login-utils/sulogin.c:586
#, fuzzy
msgid "cannot open password database."
msgstr "%s: 不能打开 %s\n"

#: login-utils/vipw.c:150 term-utils/wall.c:193
#, fuzzy
msgid "can't open temporary file"
msgstr "%s: 不能打开 %s\n"

#: login-utils/vipw.c:166
#, fuzzy, c-format
msgid "%s: create a link to %s failed"
msgstr "%s 失败.\n"

#: login-utils/vipw.c:173
#, c-format
msgid "Can't get context for %s"
msgstr ""

#: login-utils/vipw.c:179
#, c-format
msgid "Can't set context for %s"
msgstr ""

#: login-utils/vipw.c:247
#, c-format
msgid "%s unchanged"
msgstr ""

#: login-utils/vipw.c:263
#, fuzzy
msgid "cannot get lock"
msgstr "%s: 不能打开 %s\n"

#: login-utils/vipw.c:267
#, fuzzy
msgid "cannot open file"
msgstr "%s: 不能打开 %s\n"

#: login-utils/vipw.c:278
#, fuzzy
msgid "no changes made"
msgstr "%s 失败.\n"

#: login-utils/vipw.c:287
#, fuzzy
msgid "cannot chmod file"
msgstr "%s: 不能打开 %s\n"

#: login-utils/vipw.c:328
#, c-format
msgid "You are using shadow groups on this system.\n"
msgstr ""

#: login-utils/vipw.c:329
#, c-format
msgid "You are using shadow passwords on this system.\n"
msgstr ""

#. TRANSLATORS: this program uses for y and n rpmatch(3),
#. * which means they can be translated.
#: login-utils/vipw.c:332
#, c-format
msgid "Would you like to edit %s now [y/n]? "
msgstr ""

#: misc-utils/cal.c:371
msgid "illegal day value"
msgstr ""

#: misc-utils/cal.c:373 misc-utils/cal.c:387
#, c-format
msgid "illegal day value: use 1-%d"
msgstr ""

#: misc-utils/cal.c:376 misc-utils/cal.c:378
msgid "illegal month value: use 1-12"
msgstr ""

#: misc-utils/cal.c:381 misc-utils/cal.c:383
msgid "illegal year value: use 1-9999"
msgstr ""

#: misc-utils/cal.c:471
#, c-format
msgid "%s %d"
msgstr ""

#: misc-utils/cal.c:786
#, fuzzy, c-format
msgid " %s [options] [[[day] month] year]\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/cal.c:790
msgid ""
" -1, --one        show only current month (default)\n"
" -3, --three      show previous, current and next month\n"
" -s, --sunday     Sunday as first day of week\n"
" -m, --monday     Monday as first day of week\n"
" -j, --julian     output Julian dates\n"
" -y, --year       show whole current year\n"
" -V, --version    display version information and exit\n"
" -h, --help       display this help text and exit\n"
"\n"
msgstr ""

#: misc-utils/ddate.c:207
#, c-format
msgid "usage: %s [+format] [day month year]\n"
msgstr ""

#: misc-utils/ddate.c:254
msgid "St. Tib's Day"
msgstr ""

#: misc-utils/findfs.c:22
#, c-format
msgid ""
" %1$s [options] LABEL=<label>\n"
" %1$s [options] UUID=<uuid>\n"
msgstr ""

#: misc-utils/findfs.c:64 misc-utils/logger.c:128
#, fuzzy, c-format
msgid "unable to resolve '%s'"
msgstr "不能读 inodes"

#: misc-utils/findmnt.c:103
#, fuzzy
msgid "source device"
msgstr "设置只读"

#: misc-utils/findmnt.c:104
msgid "mountpoint"
msgstr ""

#: misc-utils/findmnt.c:105 misc-utils/lsblk.c:112
#, fuzzy
msgid "filesystem type"
msgstr "Filesystem state=%d\n"

#: misc-utils/findmnt.c:106
#, fuzzy
msgid "all mount options"
msgstr "不能读 inodes"

#: misc-utils/findmnt.c:107
msgid "VFS specific mount options"
msgstr ""

#: misc-utils/findmnt.c:108
msgid "FS specific mount options"
msgstr ""

#: misc-utils/findmnt.c:109
#, fuzzy
msgid "filesystem label"
msgstr "Filesystem state=%d\n"

#: misc-utils/findmnt.c:110 misc-utils/lsblk.c:115
msgid "filesystem UUID"
msgstr ""

#: misc-utils/findmnt.c:111
#, fuzzy
msgid "partition label"
msgstr "重新读取分区表"

#: misc-utils/findmnt.c:113 misc-utils/lsblk.c:111
msgid "major:minor device number"
msgstr ""

#: misc-utils/findmnt.c:114
msgid "action detected by --poll"
msgstr ""

#: misc-utils/findmnt.c:115
msgid "old mount options saved by --poll"
msgstr ""

#: misc-utils/findmnt.c:116
msgid "old mountpoint saved by --poll"
msgstr ""

#: misc-utils/findmnt.c:117
#, fuzzy
msgid "filesystem size"
msgstr "Filesystem state=%d\n"

#: misc-utils/findmnt.c:118
#, fuzzy
msgid "filesystem size available"
msgstr "Filesystem state=%d\n"

#: misc-utils/findmnt.c:119
#, fuzzy
msgid "filesystem size used"
msgstr "Filesystem state=%d\n"

#: misc-utils/findmnt.c:120
#, fuzzy
msgid "filesystem use percentage"
msgstr "Filesystem state=%d\n"

#: misc-utils/findmnt.c:294
#, fuzzy, c-format
msgid "unknown action: %s"
msgstr "%s: 未知命令: %s\n"

#: misc-utils/findmnt.c:490
msgid "mount"
msgstr ""

#: misc-utils/findmnt.c:493
msgid "umount"
msgstr ""

#: misc-utils/findmnt.c:496
msgid "remount"
msgstr ""

#: misc-utils/findmnt.c:499
#, fuzzy
msgid "move"
msgstr " 删除"

#: misc-utils/findmnt.c:502 schedutils/ionice.c:79 sys-utils/hwclock.c:336
msgid "unknown"
msgstr ""

#: misc-utils/findmnt.c:616
#, fuzzy, c-format
msgid "%s: parse error at line %d"
msgstr "%s: %s ioctl 错误\n"

#: misc-utils/findmnt.c:637 misc-utils/findmnt.c:852 sys-utils/eject.c:710
#: sys-utils/mount.c:580
#, fuzzy
msgid "failed to initialize libmount table"
msgstr "不能为 inodes 分配缓冲区"

#: misc-utils/findmnt.c:664 text-utils/parse.c:64
#, fuzzy, c-format
msgid "can't read %s"
msgstr "%s 失败.\n"

#: misc-utils/findmnt.c:792 misc-utils/findmnt.c:858 sys-utils/mount.c:149
#: sys-utils/mount.c:195 sys-utils/swapoff.c:98 sys-utils/swapon.c:88
#: sys-utils/swapon.c:463 sys-utils/umount.c:241
msgid "failed to initialize libmount iterator"
msgstr ""

#: misc-utils/findmnt.c:864
#, fuzzy
msgid "failed to initialize libmount tabdiff"
msgstr "不能为 inodes 分配缓冲区"

#: misc-utils/findmnt.c:892
#, fuzzy
msgid "poll() failed"
msgstr "查找失败"

#: misc-utils/findmnt.c:954
#, c-format
msgid ""
" %1$s [options]\n"
" %1$s [options] <device> | <mountpoint>\n"
" %1$s [options] <device> <mountpoint>\n"
" %1$s [options] [--source <device>] [--target <mountpoint>]\n"
msgstr ""

#: misc-utils/findmnt.c:961
#, c-format
msgid ""
"\n"
"Options:\n"
" -s, --fstab            search in static table of filesystems\n"
" -m, --mtab             search in table of mounted filesystems\n"
" -k, --kernel           search in kernel table of mounted\n"
"                          filesystems (default)\n"
"\n"
msgstr ""

#: misc-utils/findmnt.c:968
#, c-format
msgid ""
" -p, --poll[=<list>]    monitor changes in table of mounted filesystems\n"
" -w, --timeout <num>    upper limit in milliseconds that --poll will block\n"
"\n"
msgstr ""

#: misc-utils/findmnt.c:972
#, c-format
msgid ""
" -A, --all              disable all built-in filters, print all filesystems\n"
" -a, --ascii            use ASCII chars for tree formatting\n"
" -c, --canonicalize     canonicalize printed paths\n"
" -D, --df               imitate the output of df(1)\n"
" -d, --direction <word> direction of search, 'forward' or 'backward'\n"
" -e, --evaluate         convert tags (LABEL,UUID,PARTUUID,PARTLABEL) \n"
"                          to device names\n"
" -F, --tab-file <path>  alternative file for --fstab, --mtab or --kernel "
"options\n"
" -f, --first-only       print the first found filesystem only\n"
msgstr ""

#: misc-utils/findmnt.c:983
#, c-format
msgid ""
" -i, --invert           invert the sense of matching\n"
" -l, --list             use list format output\n"
" -n, --noheadings       don't print column headings\n"
" -u, --notruncate       don't truncate text in columns\n"
msgstr ""

#: misc-utils/findmnt.c:988
#, c-format
msgid ""
" -O, --options <list>   limit the set of filesystems by mount options\n"
" -o, --output <list>    the output columns to be shown\n"
" -P, --pairs            use key=\"value\" output format\n"
" -r, --raw              use raw output format\n"
" -t, --types <list>     limit the set of filesystems by FS types\n"
msgstr ""

#: misc-utils/findmnt.c:994
#, c-format
msgid ""
" -v, --nofsroot         don't print [/dir] for bind or btrfs mounts\n"
" -R, --submounts        print all submounts for the matching filesystems\n"
" -S, --source <string>  the device to mount (by name, maj:min, \n"
"                          LABEL=, UUID=, PARTUUID=, PARTLABEL=)\n"
" -T, --target <string>  the mountpoint to use\n"
msgstr ""

#: misc-utils/findmnt.c:1004 sys-utils/lscpu.c:1229
#, fuzzy, c-format
msgid ""
"\n"
"Available columns:\n"
msgstr "可用的命令:\n"

#: misc-utils/findmnt.c:1106
#, fuzzy, c-format
msgid "unknown direction '%s'"
msgstr "%s: 未知命令: %s\n"

#: misc-utils/findmnt.c:1235
msgid "--poll accepts only one file, but more specified by --tab-file"
msgstr ""

#: misc-utils/findmnt.c:1240
msgid ""
"options --target and --source can't be used together with command line "
"element that is not an option"
msgstr ""

#: misc-utils/findmnt.c:1283
msgid "failed to initialize libmount cache"
msgstr ""

#: misc-utils/findmnt.c:1313
#, c-format
msgid "%s column is requested, but --poll is not enabled"
msgstr ""

#: misc-utils/getopt.c:288
msgid "empty long option after -l or --long argument"
msgstr ""

#: misc-utils/getopt.c:309
msgid "unknown shell after -s or --shell argument"
msgstr ""

#: misc-utils/getopt.c:317
#, c-format
msgid ""
" %1$s optstring parameters\n"
" %1$s [options] [--] optstring parameters\n"
" %1$s [options] -o|--options optstring [options] [--] parameters\n"
msgstr ""

#: misc-utils/getopt.c:323
msgid ""
" -a, --alternative            Allow long options starting with single -\n"
msgstr ""

#: misc-utils/getopt.c:324
msgid " -h, --help                   This small usage guide\n"
msgstr ""

#: misc-utils/getopt.c:325
msgid " -l, --longoptions <longopts> Long options to be recognized\n"
msgstr ""

#: misc-utils/getopt.c:326
msgid ""
" -n, --name <progname>        The name under which errors are reported\n"
msgstr ""

#: misc-utils/getopt.c:327
msgid " -o, --options <optstring>    Short options to be recognized\n"
msgstr ""

#: misc-utils/getopt.c:328
msgid " -q, --quiet                  Disable error reporting by getopt(3)\n"
msgstr ""

#: misc-utils/getopt.c:329
msgid " -Q, --quiet-output           No normal output\n"
msgstr ""

#: misc-utils/getopt.c:330
msgid " -s, --shell <shell>          Set shell quoting conventions\n"
msgstr ""

#: misc-utils/getopt.c:331
msgid " -T, --test                   Test for getopt(1) version\n"
msgstr ""

#: misc-utils/getopt.c:332
msgid " -u, --unquote                Do not quote the output\n"
msgstr ""

#: misc-utils/getopt.c:333
msgid " -V, --version                Output version information\n"
msgstr ""

#: misc-utils/getopt.c:383 misc-utils/getopt.c:444
msgid "missing optstring argument"
msgstr ""

#: misc-utils/getopt.c:439
msgid "internal error, contact the author."
msgstr ""

#: misc-utils/kill.c:211
#, c-format
msgid "%s: unknown signal %s\n"
msgstr ""

#: misc-utils/kill.c:244
#, fuzzy
msgid "invalid sigval argument"
msgstr "不能读 inodes"

#: misc-utils/kill.c:285
#, c-format
msgid "%s: can't find process \"%s\"\n"
msgstr ""

#: misc-utils/kill.c:365
#, c-format
msgid "%s: unknown signal %s; valid signals:\n"
msgstr ""

#: misc-utils/kill.c:413
#, c-format
msgid "usage: %s [ -s signal | -p ] [ -a ] pid ...\n"
msgstr ""

#: misc-utils/kill.c:414
#, c-format
msgid "       %s -l [ signal ]\n"
msgstr ""

#: misc-utils/logger.c:88
#, fuzzy, c-format
msgid "unknown facility name: %s."
msgstr "%s: 未知命令: %s\n"

#: misc-utils/logger.c:97
#, fuzzy, c-format
msgid "unknown priority name: %s."
msgstr "%s: 未知命令: %s\n"

#: misc-utils/logger.c:107
#, c-format
msgid "openlog %s: pathname too long"
msgstr ""

#: misc-utils/logger.c:113
#, c-format
msgid "socket %s"
msgstr ""

#: misc-utils/logger.c:116
#, c-format
msgid "connect %s"
msgstr ""

#: misc-utils/logger.c:131 misc-utils/uuidd.c:135
msgid "socket"
msgstr ""

#: misc-utils/logger.c:138 misc-utils/uuidd.c:146
msgid "connect"
msgstr ""

#: misc-utils/logger.c:174
#, fuzzy, c-format
msgid " %s [options] [message]\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/logger.c:177
msgid ""
" -d, --udp             use UDP (TCP is default)\n"
" -i, --id              log the process ID too\n"
" -f, --file <file>     log the contents of this file\n"
" -h, --help            display this help text and exit\n"
msgstr ""

#: misc-utils/logger.c:181
msgid ""
" -n, --server <name>   write to this remote syslog server\n"
" -P, --port <number>   use this UDP port\n"
" -p, --priority <prio> mark given message with this priority\n"
" -s, --stderr          output message to standard error as well\n"
msgstr ""

#: misc-utils/logger.c:185
msgid ""
" -t, --tag <tag>       mark every line with this tag\n"
" -u, --socket <socket> write to this Unix socket\n"
" -V, --version         output version information and exit\n"
"\n"
msgstr ""

#: misc-utils/logger.c:234
#, c-format
msgid "file %s"
msgstr ""

#: misc-utils/logger.c:261
#, fuzzy
msgid "invalid port number argument"
msgstr "查找失败"

#: misc-utils/look.c:370
#, fuzzy, c-format
msgid " %s [options] string [file]\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/look.c:373
msgid ""
" -a, --alternative      use alternate dictionary\n"
" -d, --alphanum         compare only alpha numeric characters\n"
" -f, --ignore-case      ignore when comparing\n"
" -t, --terminate <char> define string termination character\n"
" -V, --version          output version information and exit\n"
" -h, --help             display this help and exit\n"
"\n"
msgstr ""

#: misc-utils/lsblk.c:109
msgid "device name"
msgstr ""

#: misc-utils/lsblk.c:110
msgid "internal kernel device name"
msgstr ""

#: misc-utils/lsblk.c:113
msgid "where the device is mounted"
msgstr ""

#: misc-utils/lsblk.c:114
msgid "filesystem LABEL"
msgstr ""

#: misc-utils/lsblk.c:117
#, fuzzy
msgid "partition LABEL"
msgstr "重新读取分区表"

#: misc-utils/lsblk.c:120
#, fuzzy
msgid "read-only device"
msgstr "设置只读"

#: misc-utils/lsblk.c:121
msgid "removable device"
msgstr ""

#: misc-utils/lsblk.c:122
msgid "rotational device"
msgstr ""

#: misc-utils/lsblk.c:123
msgid "device identifier"
msgstr ""

#: misc-utils/lsblk.c:124
msgid "size of the device"
msgstr ""

#: misc-utils/lsblk.c:125
#, fuzzy
msgid "state of the device"
msgstr "%s:不是一个块设备\n"

#: misc-utils/lsblk.c:126
msgid "user name"
msgstr ""

#: misc-utils/lsblk.c:127
msgid "group name"
msgstr ""

#: misc-utils/lsblk.c:128
msgid "device node permissions"
msgstr ""

#: misc-utils/lsblk.c:129
msgid "alignment offset"
msgstr ""

#: misc-utils/lsblk.c:130
msgid "minimum I/O size"
msgstr ""

#: misc-utils/lsblk.c:131
msgid "optimal I/O size"
msgstr ""

#: misc-utils/lsblk.c:132
#, fuzzy
msgid "physical sector size"
msgstr "获得段大小"

#: misc-utils/lsblk.c:133
#, fuzzy
msgid "logical sector size"
msgstr "获得段大小"

#: misc-utils/lsblk.c:134
msgid "I/O scheduler name"
msgstr ""

#: misc-utils/lsblk.c:135
msgid "request queue size"
msgstr ""

#: misc-utils/lsblk.c:136
msgid "device type"
msgstr ""

#: misc-utils/lsblk.c:137
#, fuzzy
msgid "discard alignment offset"
msgstr "获得字节大小"

#: misc-utils/lsblk.c:138
msgid "discard granularity"
msgstr ""

#: misc-utils/lsblk.c:139
msgid "discard max bytes"
msgstr ""

#: misc-utils/lsblk.c:140
msgid "discard zeroes data"
msgstr ""

#: misc-utils/lsblk.c:797
#, fuzzy, c-format
msgid "%s: failed to get device path"
msgstr "%s:不是一个块设备\n"

#: misc-utils/lsblk.c:804
#, c-format
msgid "%s: unknown device name"
msgstr ""

#: misc-utils/lsblk.c:810 misc-utils/lsblk.c:817
#, fuzzy, c-format
msgid "%s: failed to initialize sysfs handler"
msgstr "不能为 inodes 分配缓冲区"

#: misc-utils/lsblk.c:838
#, fuzzy, c-format
msgid "%s: failed to get dm name"
msgstr "不能读 inodes"

#: misc-utils/lsblk.c:875
msgid "failed to open device directory in sysfs"
msgstr ""

#: misc-utils/lsblk.c:1050
#, fuzzy, c-format
msgid "%s: failed to get whole-disk device number"
msgstr "不能读 inodes"

#: misc-utils/lsblk.c:1068
#, fuzzy, c-format
msgid "failed to compose sysfs path for %s"
msgstr "不能读 inodes"

#: misc-utils/lsblk.c:1075
#, fuzzy, c-format
msgid "%s: failed to read link"
msgstr "不能读 inodes"

#: misc-utils/lsblk.c:1117 misc-utils/lsblk.c:1119 misc-utils/lsblk.c:1144
#: misc-utils/lsblk.c:1146
#, fuzzy, c-format
msgid "failed to parse list '%s'"
msgstr "不能读 inodes"

#. TRANSLATORS: The standard value for %d is 256.
#: misc-utils/lsblk.c:1124
#, c-format
msgid "the list of excluded devices is too large (limit is %d devices)"
msgstr ""

#. TRANSLATORS: The standard value for %d is 256.
#: misc-utils/lsblk.c:1151
#, c-format
msgid "the list of included devices is too large (limit is %d devices)"
msgstr ""

#: misc-utils/lsblk.c:1163
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options] [<device> ...]\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/lsblk.c:1167
#, c-format
msgid ""
"\n"
"Options:\n"
" -a, --all            print all devices\n"
" -b, --bytes          print SIZE in bytes rather than in human readable "
"format\n"
" -d, --nodeps         don't print slaves or holders\n"
" -D, --discard        print discard capabilities\n"
" -e, --exclude <list> exclude devices by major number (default: RAM disks)\n"
" -I, --include <list> show only devices with specified major numbers\n"
" -f, --fs             output info about filesystems\n"
" -h, --help           usage information (this)\n"
" -i, --ascii          use ascii characters only\n"
" -m, --perms          output info about permissions\n"
" -l, --list           use list format ouput\n"
" -n, --noheadings     don't print headings\n"
" -o, --output <list>  output columns\n"
" -P, --pairs          use key=\"value\" output format\n"
" -r, --raw            use raw output format\n"
" -s, --inverse        inverse dependencies\n"
" -t, --topology       output info about topology\n"
" -V, --version        output version information and exit\n"
msgstr ""

#: misc-utils/lsblk.c:1187 misc-utils/lslocks.c:489 sys-utils/prlimit.c:189
#, fuzzy, c-format
msgid ""
"\n"
"Available columns (for --output):\n"
msgstr "可用的命令:\n"

#: misc-utils/lsblk.c:1200
#, fuzzy, c-format
msgid "failed to access sysfs directory: %s"
msgstr "不能读 inodes"

#: misc-utils/lslocks.c:68
msgid "command of the process holding the lock"
msgstr ""

#: misc-utils/lslocks.c:69
msgid "PID of the process holding the lock"
msgstr ""

#: misc-utils/lslocks.c:70
msgid "kind of lock: FL_FLOCK or FL_POSIX."
msgstr ""

#: misc-utils/lslocks.c:71
#, fuzzy
msgid "size of the lock"
msgstr "%s:不是一个块设备\n"

#: misc-utils/lslocks.c:72
msgid "lock access mode"
msgstr ""

#: misc-utils/lslocks.c:73
msgid "mandatory state of the lock: 0 (none), 1 (set)"
msgstr ""

#: misc-utils/lslocks.c:74
msgid "relative byte offset of the lock"
msgstr ""

#: misc-utils/lslocks.c:75
msgid "ending offset of the lock"
msgstr ""

#: misc-utils/lslocks.c:76
#, fuzzy
msgid "path of the locked file"
msgstr "%s: 不能打开 %s\n"

#: misc-utils/lslocks.c:271
#, fuzzy
msgid "failed to parse pid"
msgstr "不能读 inodes"

#: misc-utils/lslocks.c:274
msgid "(unknown)"
msgstr ""

#: misc-utils/lslocks.c:283
#, fuzzy
msgid "failed to parse start"
msgstr "不能读 inodes"

#: misc-utils/lslocks.c:290
#, fuzzy
msgid "failed to parse end"
msgstr "不能读 inodes"

#: misc-utils/lslocks.c:478 misc-utils/mcookie.c:70 misc-utils/uuidd.c:71
#: misc-utils/uuidgen.c:36 sys-utils/arch.c:44 sys-utils/dmesg.c:151
#: sys-utils/ipcmk.c:67 sys-utils/lscpu.c:1216 sys-utils/readprofile.c:104
#: sys-utils/rtcwake.c:89 term-utils/setterm.c:678
#, fuzzy, c-format
msgid " %s [options]\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/lslocks.c:481
msgid ""
" -p, --pid <pid>        process id\n"
" -o, --output <list>    define which output columns to use\n"
" -n, --noheadings       don't print headings\n"
" -r  --raw              use the raw output format\n"
" -u, --notruncate       don't truncate text in columns\n"
" -h, --help             display this help and exit\n"
" -V, --version          output version information and exit\n"
msgstr ""

#: misc-utils/lslocks.c:524 schedutils/chrt.c:257 schedutils/ionice.c:165
#: schedutils/ionice.c:213 schedutils/ionice.c:223 schedutils/taskset.c:161
#: sys-utils/prlimit.c:589
#, fuzzy
msgid "invalid PID argument"
msgstr "%s 需要一个参数\n"

#: misc-utils/mcookie.c:73
msgid ""
" -f, --file <file> use file as a cookie seed\n"
" -v, --verbose     explain what is being done\n"
" -V, --version     output version information and exit\n"
" -h, --help        display this help and exit\n"
"\n"
msgstr ""

#: misc-utils/mcookie.c:147 misc-utils/mcookie.c:181
#, fuzzy, c-format
msgid "Could not open %s"
msgstr "%s: 不能打开 %s\n"

#: misc-utils/mcookie.c:152 misc-utils/mcookie.c:176
#, c-format
msgid "Got %d bytes from %s\n"
msgstr ""

#: misc-utils/mcookie.c:158
#, fuzzy, c-format
msgid "closing %s failed"
msgstr "%s 失败.\n"

#: misc-utils/namei.c:186
#, fuzzy, c-format
msgid "failed to read symlink: %s"
msgstr "不能读 inodes"

#: misc-utils/namei.c:231
#, c-format
msgid "could not stat '%s'"
msgstr ""

#: misc-utils/namei.c:370
#, fuzzy, c-format
msgid "%s - No such file or directory\n"
msgstr "根 inode 不是一个目录"

#: misc-utils/namei.c:420
#, fuzzy, c-format
msgid " %s [options] pathname [pathname ...]\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/namei.c:423
msgid ""
" -h, --help          displays this help text\n"
" -V, --version       output version information and exit\n"
" -x, --mountpoints   show mount point directories with a 'D'\n"
" -m, --modes         show the mode bits of each file\n"
" -o, --owners        show owner and group name of each file\n"
" -l, --long          use a long listing format (-m -o -v) \n"
" -n, --nosymlinks    don't follow symlinks\n"
" -v, --vertical      vertical align of modes and owners\n"
msgstr ""

#: misc-utils/namei.c:432
msgid ""
"\n"
"For more information see namei(1).\n"
msgstr ""

#: misc-utils/namei.c:493
msgid "pathname argument is missing"
msgstr ""

#: misc-utils/namei.c:517
#, c-format
msgid "%s: exceeded limit of symlinks"
msgstr ""

#: misc-utils/rename.c:54
#, fuzzy, c-format
msgid "renaming %s to %s failed"
msgstr "%s 失败.\n"

#: misc-utils/rename.c:67
#, fuzzy, c-format
msgid " %s [options] expression replacement file...\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/rename.c:71
msgid ""
" -v, --verbose    explain what is being done\n"
" -V, --version    output version information and exit\n"
" -h, --help       display this help and exit\n"
"\n"
msgstr ""

#: misc-utils/uuidd.c:74
msgid ""
" -p, --pid <path>        path to pid file\n"
" -s, --socket <path>     path to socket\n"
" -T, --timeout <sec>     specify inactivity timeout\n"
" -k, --kill              kill running daemon\n"
" -r, --random            test random-based generation\n"
" -t, --time              test time-based generation\n"
" -n, --uuids <num>       request number of uuids\n"
" -P, --no-pid            do not create pid file\n"
" -F, --no-fork           do not daemonize using double-fork\n"
" -S, --socket-activation do not create listening socket\n"
" -d, --debug             run in debugging mode\n"
" -q, --quiet             turn on quiet mode\n"
" -V, --version           output version information and exit\n"
" -h, --help              display this help and exit\n"
"\n"
msgstr ""

#: misc-utils/uuidd.c:128
msgid "bad arguments"
msgstr ""

#: misc-utils/uuidd.c:166
msgid "write"
msgstr ""

#: misc-utils/uuidd.c:174
msgid "read count"
msgstr ""

#: misc-utils/uuidd.c:180
msgid "bad response length"
msgstr ""

#: misc-utils/uuidd.c:220
#, fuzzy, c-format
msgid "Failed to open/create %s: %m\n"
msgstr "不能读 inodes"

#: misc-utils/uuidd.c:235
#, fuzzy, c-format
msgid "Failed to lock %s: %m\n"
msgstr "不能读 inodes"

#: misc-utils/uuidd.c:259
#, c-format
msgid "Couldn't create unix stream socket: %m"
msgstr ""

#: misc-utils/uuidd.c:285
#, c-format
msgid "Couldn't bind unix socket %s: %m\n"
msgstr ""

#: misc-utils/uuidd.c:323
#, c-format
msgid "uuidd daemon already running at pid %s\n"
msgstr ""

#: misc-utils/uuidd.c:334
#, c-format
msgid "Couldn't listen on unix socket %s: %m\n"
msgstr ""

#: misc-utils/uuidd.c:361
#, c-format
msgid "No or too many file descriptors received.\n"
msgstr ""

#: misc-utils/uuidd.c:386
#, c-format
msgid "Error reading from client, len = %d\n"
msgstr ""

#: misc-utils/uuidd.c:395
#, c-format
msgid "operation %d, incoming num = %d\n"
msgstr ""

#: misc-utils/uuidd.c:398
#, c-format
msgid "operation %d\n"
msgstr ""

#: misc-utils/uuidd.c:414
#, c-format
msgid "Generated time UUID: %s\n"
msgstr ""

#: misc-utils/uuidd.c:424
#, c-format
msgid "Generated random UUID: %s\n"
msgstr ""

#: misc-utils/uuidd.c:433
#, c-format
msgid "Generated time UUID %s and %d following\n"
msgid_plural "Generated time UUID %s and %d following\n"
msgstr[0] ""
msgstr[1] ""

#: misc-utils/uuidd.c:454
#, c-format
msgid "Generated %d UUID:\n"
msgid_plural "Generated %d UUIDs:\n"
msgstr[0] ""
msgstr[1] ""

#: misc-utils/uuidd.c:468
#, c-format
msgid "Invalid operation %d\n"
msgstr ""

#: misc-utils/uuidd.c:480
#, c-format
msgid "Unexpected reply length from server %d"
msgstr ""

#: misc-utils/uuidd.c:535 misc-utils/uuidd.c:575
#, c-format
msgid "Bad number: %s\n"
msgstr ""

#: misc-utils/uuidd.c:555
#, c-format
msgid "uuidd has been built without support for socket activation.\n"
msgstr ""

#: misc-utils/uuidd.c:592
#, c-format
msgid "Both --pid and --no-pid specified. Ignoring --no-pid.\n"
msgstr ""

#: misc-utils/uuidd.c:602
#, c-format
msgid "Both --socket-activation and --socket specified. Ignoring --socket\n"
msgstr ""

#: misc-utils/uuidd.c:609 misc-utils/uuidd.c:637
#, c-format
msgid "Error calling uuidd daemon (%s): %m\n"
msgstr ""

#: misc-utils/uuidd.c:618
#, c-format
msgid "%s and %d subsequent UUID\n"
msgid_plural "%s and %d subsequent UUIDs\n"
msgstr[0] ""
msgstr[1] ""

#: misc-utils/uuidd.c:622
#, c-format
msgid "List of UUIDs:\n"
msgstr ""

#: misc-utils/uuidd.c:656
#, c-format
msgid "Couldn't kill uuidd running at pid %d: %m\n"
msgstr ""

#: misc-utils/uuidd.c:661
#, c-format
msgid "Killed uuidd running at pid %d\n"
msgstr ""

#: misc-utils/uuidgen.c:39
msgid ""
" -r, --random     generate random-based uuid\n"
" -t, --time       generate time-based uuid\n"
" -V, --version    output version information and exit\n"
" -h, --help       display this help and exit\n"
"\n"
msgstr ""

#: misc-utils/whereis.c:144
msgid ""
" -f <file>  define search scope\n"
" -b         search only binaries\n"
" -B <dirs>  define binaries lookup path\n"
" -m         search only manual paths\n"
" -M <dirs>  define man lookup path\n"
" -s         search only sources path\n"
" -S <dirs>  define sources lookup path\n"
" -u         search from unusual entities\n"
" -V         output version information and exit\n"
" -h         display this help and exit\n"
"\n"
msgstr ""

#: misc-utils/whereis.c:155
msgid "See how to use file and dirs arguments from whereis(1) manual.\n"
msgstr ""

#: misc-utils/wipefs.c:248
#, c-format
msgid "error: %s: probing initialization failed"
msgstr ""

#: misc-utils/wipefs.c:292
#, fuzzy, c-format
msgid "%s: failed to erase %s magic string at offset 0x%08jx"
msgstr "不能读 inodes"

#: misc-utils/wipefs.c:298
#, c-format
msgid "%s: %zd bytes were erased at offset 0x%08jx (%s): "
msgstr ""

#: misc-utils/wipefs.c:344
#, fuzzy, c-format
msgid "%s: offset 0x%jx not found"
msgstr "%s: 不能打开 %s\n"

#: misc-utils/wipefs.c:364
msgid ""
" -a, --all           wipe all magic strings (BE CAREFUL!)\n"
" -h, --help          show this help text\n"
" -n, --no-act        do everything except the actual write() call\n"
" -o, --offset <num>  offset to erase, in bytes\n"
" -p, --parsable      print out in parsable instead of printable format\n"
" -q, --quiet         suppress output messages\n"
" -t, --types <list>  limit the set of filesystem, RAIDs or partition tables\n"
" -V, --version       output version information and exit\n"
msgstr ""

#: misc-utils/wipefs.c:373
#, c-format
msgid ""
"\n"
"For more information see wipefs(8).\n"
msgstr ""

#: misc-utils/wipefs.c:425
#, fuzzy
msgid "invalid offset argument"
msgstr "不能读 inodes"

#: mount-deprecated/fstab.c:145
#, c-format
msgid "warning: error reading %s: %s"
msgstr ""

#: mount-deprecated/fstab.c:172 mount-deprecated/fstab.c:197
#, c-format
msgid "warning: can't open %s: %s"
msgstr ""

#: mount-deprecated/fstab.c:177
#, c-format
msgid "mount: could not open %s - using %s instead\n"
msgstr ""

#: mount-deprecated/fstab.c:635
#, c-format
msgid "can't create lock file %s: %s (use -n flag to override)"
msgstr ""

#: mount-deprecated/fstab.c:661
#, c-format
msgid "can't link lock file %s: %s (use -n flag to override)"
msgstr ""

#: mount-deprecated/fstab.c:677
#, c-format
msgid "can't open lock file %s: %s (use -n flag to override)"
msgstr ""

#: mount-deprecated/fstab.c:692
#, c-format
msgid "Can't lock lock file %s: %s\n"
msgstr ""

#: mount-deprecated/fstab.c:706
#, c-format
msgid "can't lock lock file %s: %s"
msgstr ""

#: mount-deprecated/fstab.c:708
msgid "timed out"
msgstr ""

#: mount-deprecated/fstab.c:715
#, c-format
msgid ""
"Cannot create link %s\n"
"Perhaps there is a stale lock file?\n"
msgstr ""

#: mount-deprecated/fstab.c:857 mount-deprecated/fstab.c:914
#, c-format
msgid "cannot open %s (%s) - mtab not updated"
msgstr ""

#: mount-deprecated/fstab.c:922
#, c-format
msgid "error writing %s: %s"
msgstr ""

#: mount-deprecated/fstab.c:937
#, fuzzy, c-format
msgid "%s: cannot fflush changes: %s"
msgstr "%s: 不能打开 %s\n"

#: mount-deprecated/fstab.c:954
#, c-format
msgid "error changing mode of %s: %s\n"
msgstr ""

#: mount-deprecated/fstab.c:967
#, c-format
msgid "error changing owner of %s: %s\n"
msgstr ""

#: mount-deprecated/fstab.c:978
#, c-format
msgid "can't rename %s to %s: %s\n"
msgstr ""

#: mount-deprecated/mount.c:318
#, c-format
msgid ""
"\n"
"mount: warning: /etc/mtab is not writable (e.g. read-only filesystem).\n"
"       It's possible that information reported by mount(8) is not\n"
"       up to date. For actual information about system mount points\n"
"       check the /proc/mounts file.\n"
"\n"
msgstr ""

#: mount-deprecated/mount.c:368
#, c-format
msgid "mount: improperly quoted option string '%s'"
msgstr ""

#: mount-deprecated/mount.c:401
#, c-format
msgid "mount: translated %s '%s' to '%s'\n"
msgstr ""

#: mount-deprecated/mount.c:458
#, c-format
msgid "mount: SELinux *context= options are ignore on remount.\n"
msgstr ""

#: mount-deprecated/mount.c:654
#, c-format
msgid "mount: according to mtab, %s is already mounted on %s"
msgstr ""

#: mount-deprecated/mount.c:659
#, c-format
msgid "mount: according to mtab, %s is mounted on %s"
msgstr ""

#: mount-deprecated/mount.c:683
#, c-format
msgid "mount: can't open %s for writing: %s"
msgstr ""

#: mount-deprecated/mount.c:700
#, c-format
msgid "mount: error writing %s: %s"
msgstr ""

#: mount-deprecated/mount.c:708
#, c-format
msgid "mount: error changing mode of %s: %s"
msgstr ""

#: mount-deprecated/mount.c:810
#, fuzzy, c-format
msgid "mount: cannot set group id: %m"
msgstr "%s: 不能打开 %s\n"

#: mount-deprecated/mount.c:813
#, fuzzy, c-format
msgid "mount: cannot set user id: %m"
msgstr "%s: 不能打开 %s\n"

#: mount-deprecated/mount.c:860 mount-deprecated/mount.c:2167
#, c-format
msgid "mount: cannot fork: %s"
msgstr ""

#: mount-deprecated/mount.c:996
#, c-format
msgid "Trying %s\n"
msgstr ""

#: mount-deprecated/mount.c:1024
#, c-format
msgid "mount: you didn't specify a filesystem type for %s\n"
msgstr ""

#: mount-deprecated/mount.c:1027
#, c-format
msgid "       I will try all types mentioned in %s or %s\n"
msgstr ""

#: mount-deprecated/mount.c:1030
#, c-format
msgid "       and it looks like this is swapspace\n"
msgstr ""

#: mount-deprecated/mount.c:1032
#, c-format
msgid "       I will try type %s\n"
msgstr ""

#: mount-deprecated/mount.c:1057
#, c-format
msgid "%s looks like swapspace - not mounted"
msgstr ""

#: mount-deprecated/mount.c:1065
#, c-format
msgid ""
"mount: %s: more filesystems detected. This should not happen,\n"
"       use -t <type> to explicitly specify the filesystem type or\n"
"       use wipefs(8) to clean up the device.\n"
msgstr ""

#: mount-deprecated/mount.c:1153
msgid "mount failed"
msgstr ""

#: mount-deprecated/mount.c:1155
#, c-format
msgid "mount: only root can mount %s on %s"
msgstr ""

#: mount-deprecated/mount.c:1246
msgid "mount: loop device specified twice"
msgstr ""

#: mount-deprecated/mount.c:1251
msgid "mount: type specified twice"
msgstr ""

#: mount-deprecated/mount.c:1279
#, c-format
msgid "mount: skipping the setup of a loop device\n"
msgstr ""

#: mount-deprecated/mount.c:1290
#, c-format
msgid "mount: enabling autoclear loopdev flag\n"
msgstr ""

#: mount-deprecated/mount.c:1298
#, c-format
msgid "mount: invalid offset '%s' specified"
msgstr ""

#: mount-deprecated/mount.c:1302
#, c-format
msgid "mount: invalid sizelimit '%s' specified"
msgstr ""

#: mount-deprecated/mount.c:1307
#, c-format
msgid "mount: according to mtab %s is already mounted on %s as loop"
msgstr ""

#: mount-deprecated/mount.c:1314
msgid "mount: couldn't lock into memory"
msgstr ""

#: mount-deprecated/mount.c:1334
#, fuzzy
msgid "mount: failed to found free loop device"
msgstr "不能读 inodes"

#: mount-deprecated/mount.c:1339
#, c-format
msgid "mount: going to use the loop device %s\n"
msgstr ""

#: mount-deprecated/mount.c:1353
#, fuzzy, c-format
msgid "mount: %s: failed to set loopdev attributes"
msgstr "%s:不是一个块设备\n"

#: mount-deprecated/mount.c:1364
#, fuzzy, c-format
msgid "mount: %s: failed setting up loop device: %m"
msgstr "%s:不是一个块设备\n"

#: mount-deprecated/mount.c:1375
#, c-format
msgid "mount: stolen loop=%s ...trying again\n"
msgstr ""

#: mount-deprecated/mount.c:1380
#, c-format
msgid "mount: stolen loop=%s"
msgstr ""

#: mount-deprecated/mount.c:1387
#, c-format
msgid "mount: setup loop device successfully\n"
msgstr ""

#: mount-deprecated/mount.c:1435
#, c-format
msgid "mount: no %s found - creating it..\n"
msgstr ""

#: mount-deprecated/mount.c:1457
msgid "mount: argument to -p or --pass-fd must be a number"
msgstr ""

#: mount-deprecated/mount.c:1470
#, c-format
msgid "mount: cannot open %s for setting speed"
msgstr ""

#: mount-deprecated/mount.c:1473
#, fuzzy, c-format
msgid "mount: cannot set speed: %m"
msgstr "%s: 不能打开 %s\n"

#: mount-deprecated/mount.c:1564
#, c-format
msgid "mount: according to mtab, %s is already mounted on %s\n"
msgstr ""

#: mount-deprecated/mount.c:1643
#, c-format
msgid "mount: warning: %s seems to be mounted read-write.\n"
msgstr ""

#: mount-deprecated/mount.c:1655
#, c-format
msgid "mount: warning: %s seems to be mounted read-only.\n"
msgstr ""

#: mount-deprecated/mount.c:1691
msgid ""
"mount: I could not determine the filesystem type, and none was specified"
msgstr ""

#: mount-deprecated/mount.c:1694
msgid "mount: you must specify the filesystem type"
msgstr ""

#: mount-deprecated/mount.c:1697
msgid "mount: mount failed"
msgstr ""

#: mount-deprecated/mount.c:1703 mount-deprecated/mount.c:1740
#, c-format
msgid "mount: mount point %s is not a directory"
msgstr ""

#: mount-deprecated/mount.c:1705
msgid "mount: permission denied"
msgstr ""

#: mount-deprecated/mount.c:1707
msgid "mount: must be superuser to use mount"
msgstr ""

#: mount-deprecated/mount.c:1711 mount-deprecated/mount.c:1715
#, c-format
msgid "mount: %s is busy"
msgstr ""

#: mount-deprecated/mount.c:1717
msgid "mount: proc already mounted"
msgstr ""

#: mount-deprecated/mount.c:1719
#, c-format
msgid "mount: %s already mounted or %s busy"
msgstr ""

#: mount-deprecated/mount.c:1725
#, c-format
msgid "mount: mount point %s does not exist"
msgstr ""

#: mount-deprecated/mount.c:1727
#, c-format
msgid "mount: mount point %s is a symbolic link to nowhere"
msgstr ""

#: mount-deprecated/mount.c:1732
#, c-format
msgid "mount: special device %s does not exist"
msgstr ""

#: mount-deprecated/mount.c:1744
#, c-format
msgid ""
"mount: special device %s does not exist\n"
"       (a path prefix is not a directory)\n"
msgstr ""

#: mount-deprecated/mount.c:1756
#, c-format
msgid "mount: %s not mounted or bad option"
msgstr ""

#: mount-deprecated/mount.c:1758
#, c-format
msgid ""
"mount: wrong fs type, bad option, bad superblock on %s,\n"
"       missing codepage or helper program, or other error"
msgstr ""

#: mount-deprecated/mount.c:1765
msgid ""
"       (for several filesystems (e.g. nfs, cifs) you might\n"
"       need a /sbin/mount.<type> helper program)"
msgstr ""

#: mount-deprecated/mount.c:1774
msgid ""
"       (could this be the IDE device where you in fact use\n"
"       ide-scsi so that sr0 or sda or so is needed?)"
msgstr ""

#: mount-deprecated/mount.c:1779
msgid ""
"       (aren't you trying to mount an extended partition,\n"
"       instead of some logical partition inside?)"
msgstr ""

#: mount-deprecated/mount.c:1786
msgid ""
"       In some cases useful info is found in syslog - try\n"
"       dmesg | tail  or so\n"
msgstr ""

#: mount-deprecated/mount.c:1792 sys-utils/mount.c:503
msgid "mount table full"
msgstr ""

#: mount-deprecated/mount.c:1794
#, c-format
msgid "mount: %s: can't read superblock"
msgstr ""

#: mount-deprecated/mount.c:1800
#, c-format
msgid "mount: %s: unknown device"
msgstr ""

#: mount-deprecated/mount.c:1805
#, c-format
msgid "mount: unknown filesystem type '%s'"
msgstr ""

#: mount-deprecated/mount.c:1817
#, c-format
msgid "mount: probably you meant %s"
msgstr ""

#: mount-deprecated/mount.c:1820
msgid "mount: maybe you meant 'iso9660'?"
msgstr ""

#: mount-deprecated/mount.c:1823
msgid "mount: maybe you meant 'vfat'?"
msgstr ""

#: mount-deprecated/mount.c:1826
#, c-format
msgid "mount: %s has wrong device number or fs type %s not supported"
msgstr ""

#: mount-deprecated/mount.c:1834
#, c-format
msgid "mount: %s is not a block device, and stat fails?"
msgstr ""

#: mount-deprecated/mount.c:1836
#, c-format
msgid ""
"mount: the kernel does not recognize %s as a block device\n"
"       (maybe `modprobe driver'?)"
msgstr ""

#: mount-deprecated/mount.c:1839
#, c-format
msgid "mount: %s is not a block device (maybe try `-o loop'?)"
msgstr ""

#: mount-deprecated/mount.c:1842
#, c-format
msgid "mount: %s is not a block device"
msgstr ""

#: mount-deprecated/mount.c:1847
#, c-format
msgid "mount: %s is not a valid block device"
msgstr ""

#: mount-deprecated/mount.c:1850
msgid "block device "
msgstr ""

#: mount-deprecated/mount.c:1852
#, c-format
msgid "mount: cannot mount %s%s read-only"
msgstr ""

#: mount-deprecated/mount.c:1856
#, c-format
msgid "mount: %s%s is write-protected but explicit `-w' flag given"
msgstr ""

#: mount-deprecated/mount.c:1860
#, c-format
msgid "mount: cannot remount %s%s read-write, is write-protected"
msgstr ""

#: mount-deprecated/mount.c:1875
#, c-format
msgid "mount: %s%s is write-protected, mounting read-only"
msgstr ""

#: mount-deprecated/mount.c:1883
#, c-format
msgid "mount: no medium found on %s"
msgstr ""

#: mount-deprecated/mount.c:1901 sys-utils/mount.c:295
#, c-format
msgid ""
"mount: %s does not contain SELinux labels.\n"
"       You just mounted an file system that supports labels which does not\n"
"       contain labels, onto an SELinux box. It is likely that confined\n"
"       applications will generate AVC messages and not be allowed access to\n"
"       this file system.  For more details see restorecon(8) and mount(8).\n"
msgstr ""

#: mount-deprecated/mount.c:1981
#, c-format
msgid "mount: no type was given - I'll assume nfs because of the colon\n"
msgstr ""

#: mount-deprecated/mount.c:1987
#, c-format
msgid "mount: no type was given - I'll assume cifs because of the // prefix\n"
msgstr ""

#: mount-deprecated/mount.c:2055
#, c-format
msgid "mount: ignore %s (unparsable offset= option)\n"
msgstr ""

#: mount-deprecated/mount.c:2068
#, c-format
msgid "mount: %s already mounted on %s\n"
msgstr ""

#: mount-deprecated/mount.c:2249
#, c-format
msgid ""
"Usage: mount -V                 : print version\n"
"       mount -h                 : print this help\n"
"       mount                    : list mounted filesystems\n"
"       mount -l                 : idem, including volume labels\n"
"So far the informational part. Next the mounting.\n"
"The command is `mount [-t fstype] something somewhere'.\n"
"Details found in /etc/fstab may be omitted.\n"
"       mount -a [-t|-O] ...     : mount all stuff from /etc/fstab\n"
"       mount device             : mount device at the known place\n"
"       mount directory          : mount known device here\n"
"       mount -t type dev dir    : ordinary mount command\n"
"Note that one does not really mount a device, one mounts\n"
"a filesystem (of the given type) found on the device.\n"
"One can also mount an already visible directory tree elsewhere:\n"
"       mount --bind olddir newdir\n"
"or move a subtree:\n"
"       mount --move olddir newdir\n"
"One can change the type of mount containing the directory dir:\n"
"       mount --make-shared dir\n"
"       mount --make-slave dir\n"
"       mount --make-private dir\n"
"       mount --make-unbindable dir\n"
"One can change the type of all the mounts in a mount subtree\n"
"containing the directory dir:\n"
"       mount --make-rshared dir\n"
"       mount --make-rslave dir\n"
"       mount --make-rprivate dir\n"
"       mount --make-runbindable dir\n"
"A device can be given by name, say /dev/hda1 or /dev/cdrom,\n"
"or by label, using  -L label  or by uuid, using  -U uuid .\n"
"Other options: [-nfFrsvw] [-o options] [-p passwdfd].\n"
"For many more details, say  man 8 mount .\n"
msgstr ""

#: mount-deprecated/mount.c:2579
#, c-format
msgid "mount: only root can do that (effective UID is %u)"
msgstr ""

#: mount-deprecated/mount.c:2582
msgid "mount: only root can do that"
msgstr ""

#: mount-deprecated/mount.c:2593
msgid "nothing was mounted"
msgstr ""

#: mount-deprecated/mount.c:2611 mount-deprecated/mount.c:2637
msgid "mount: no such partition found"
msgstr ""

#: mount-deprecated/mount.c:2614
#, c-format
msgid "mount: can't find %s in %s or %s"
msgstr ""

#: mount-deprecated/mount_mntent.c:110
#, c-format
msgid "[mntent]: warning: no final newline at the end of %s\n"
msgstr ""

#: mount-deprecated/mount_mntent.c:160
#, c-format
msgid "[mntent]: line %d in %s is bad%s\n"
msgstr ""

#: mount-deprecated/mount_mntent.c:163
msgid "; rest of file ignored"
msgstr ""

#: mount-deprecated/sundries.c:30
msgid "bug in xstrndup call"
msgstr ""

#: mount-deprecated/sundries.c:225 mount-deprecated/sundries.c:283
#: mount-deprecated/sundries.c:298
msgid "not enough memory"
msgstr ""

#: mount-deprecated/umount.c:43
#, c-format
msgid "umount: compiled without support for -f\n"
msgstr ""

#: mount-deprecated/umount.c:139
#, fuzzy, c-format
msgid "umount: cannot set group id: %m"
msgstr "%s: 不能打开 %s\n"

#: mount-deprecated/umount.c:142
#, fuzzy, c-format
msgid "umount: cannot set user id: %m"
msgstr "%s: 不能打开 %s\n"

#: mount-deprecated/umount.c:171
#, c-format
msgid "umount: cannot fork: %s"
msgstr ""

#: mount-deprecated/umount.c:192
#, c-format
msgid "umount: %s: invalid block device"
msgstr ""

#: mount-deprecated/umount.c:194
#, c-format
msgid "umount: %s: not mounted"
msgstr ""

#: mount-deprecated/umount.c:196
#, c-format
msgid "umount: %s: can't write superblock"
msgstr ""

#: mount-deprecated/umount.c:200
#, c-format
msgid ""
"umount: %s: device is busy.\n"
"        (In some cases useful info about processes that use\n"
"         the device is found by lsof(8) or fuser(1))"
msgstr ""

#: mount-deprecated/umount.c:205
#, c-format
msgid "umount: %s: not found"
msgstr ""

#: mount-deprecated/umount.c:207
#, c-format
msgid "umount: %s: must be superuser to umount"
msgstr ""

#: mount-deprecated/umount.c:209
#, c-format
msgid "umount: %s: block devices not permitted on fs"
msgstr ""

#: mount-deprecated/umount.c:211
#, c-format
msgid "umount: %s: %s"
msgstr ""

#: mount-deprecated/umount.c:239
#, c-format
msgid "umount: internal error: invalid abs path: %s"
msgstr ""

#: mount-deprecated/umount.c:254
#, fuzzy, c-format
msgid "umount: failed to chdir to %s: %m"
msgstr "不能读 inodes"

#: mount-deprecated/umount.c:257
#, fuzzy, c-format
msgid "umount: failed to obtain current directory: %m"
msgstr "不能读 inodes"

#: mount-deprecated/umount.c:260
#, c-format
msgid "umount: mountpoint moved (%s -> %s)"
msgstr ""

#: mount-deprecated/umount.c:263
#, c-format
msgid "current directory moved to %s\n"
msgstr ""

#: mount-deprecated/umount.c:328
#, c-format
msgid "no umount2, trying umount...\n"
msgstr ""

#: mount-deprecated/umount.c:348
#, c-format
msgid "umount: %s busy - remounted read-only\n"
msgstr ""

#: mount-deprecated/umount.c:366
#, c-format
msgid "umount: could not remount %s read-only\n"
msgstr ""

#: mount-deprecated/umount.c:375
#, fuzzy, c-format
msgid "%s has been unmounted\n"
msgstr "%s 已经挂载.\t"

#: mount-deprecated/umount.c:482
msgid "umount: cannot find list of filesystems to unmount"
msgstr ""

#: mount-deprecated/umount.c:514
#, c-format
msgid ""
"Usage: umount -h | -V\n"
"       umount -a [-d] [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n"
"       umount [-d] [-f] [-r] [-n] [-v] special | node...\n"
msgstr ""

#: mount-deprecated/umount.c:558
#, fuzzy, c-format
msgid "failed to parse 'offset=%s' options\n"
msgstr "不能读 inodes"

#: mount-deprecated/umount.c:566
#, c-format
msgid "device %s is associated with %s\n"
msgstr ""

#: mount-deprecated/umount.c:572
#, c-format
msgid "device %s is not associated with %s\n"
msgstr ""

#: mount-deprecated/umount.c:606
msgid "Cannot unmount \"\"\n"
msgstr ""

#: mount-deprecated/umount.c:614
#, c-format
msgid "Trying to unmount %s\n"
msgstr ""

#: mount-deprecated/umount.c:628
msgid "umount: confused when analyzing mtab"
msgstr ""

#: mount-deprecated/umount.c:634
#, c-format
msgid "umount: cannot unmount %s -- %s is mounted over it on the same point"
msgstr ""

#: mount-deprecated/umount.c:642
#, c-format
msgid "Could not find %s in mtab\n"
msgstr ""

#: mount-deprecated/umount.c:652
#, c-format
msgid "%s is associated with %s\n"
msgstr ""

#: mount-deprecated/umount.c:658
#, c-format
msgid "umount: warning: %s is associated with more than one loop device\n"
msgstr ""

#: mount-deprecated/umount.c:676
#, c-format
msgid "umount: %s is not mounted (according to mtab)"
msgstr ""

#: mount-deprecated/umount.c:690
#, c-format
msgid "umount: it seems %s is mounted multiple times"
msgstr ""

#: mount-deprecated/umount.c:704
#, c-format
msgid "umount: %s is not in the fstab (and you are not root)"
msgstr ""

#: mount-deprecated/umount.c:710
#, c-format
msgid "umount: %s mount disagrees with the fstab"
msgstr ""

#: mount-deprecated/umount.c:751
#, c-format
msgid "umount: only %s can unmount %s from %s"
msgstr ""

#: mount-deprecated/umount.c:848
msgid "umount: only root can do that"
msgstr ""

#: schedutils/chrt.c:63
#, c-format
msgid ""
"\n"
"chrt - manipulate real-time attributes of a process\n"
"\n"
"Set policy:\n"
"  chrt [options] <policy> <priority> {<pid> | <command> [<arg> ...]}\n"
"\n"
"Get policy:\n"
"  chrt [options] {<pid> | <command> [<arg> ...]}\n"
msgstr ""

#: schedutils/chrt.c:70
#, c-format
msgid ""
"\n"
"Scheduling policies:\n"
"  -b | --batch         set policy to SCHED_BATCH\n"
"  -f | --fifo          set policy to SCHED_FIFO\n"
"  -i | --idle          set policy to SCHED_IDLE\n"
"  -o | --other         set policy to SCHED_OTHER\n"
"  -r | --rr            set policy to SCHED_RR (default)\n"
msgstr ""

#: schedutils/chrt.c:79
#, c-format
msgid ""
"\n"
"Scheduling flags:\n"
"  -R | --reset-on-fork set SCHED_RESET_ON_FORK for FIFO or RR\n"
msgstr ""

#: schedutils/chrt.c:83
#, c-format
msgid ""
"\n"
"Options:\n"
"  -a | --all-tasks     operate on all the tasks (threads) for a given pid\n"
"  -h | --help          display this help\n"
"  -m | --max           show min and max valid priorities\n"
"  -p | --pid           operate on existing given pid\n"
"  -v | --verbose       display status information\n"
"  -V | --version       output version information\n"
"\n"
msgstr ""

#: schedutils/chrt.c:105
#, c-format
msgid "failed to get pid %d's policy"
msgstr ""

#: schedutils/chrt.c:108
#, c-format
msgid "pid %d's new scheduling policy: "
msgstr ""

#: schedutils/chrt.c:110
#, c-format
msgid "pid %d's current scheduling policy: "
msgstr ""

#: schedutils/chrt.c:143
msgid "unknown scheduling policy"
msgstr ""

#: schedutils/chrt.c:147
#, c-format
msgid "failed to get pid %d's attributes"
msgstr ""

#: schedutils/chrt.c:150
#, c-format
msgid "pid %d's new scheduling priority: %d\n"
msgstr ""

#: schedutils/chrt.c:153
#, c-format
msgid "pid %d's current scheduling priority: %d\n"
msgstr ""

#: schedutils/chrt.c:188
#, c-format
msgid "SCHED_%s min/max priority\t: %d/%d\n"
msgstr ""

#: schedutils/chrt.c:191
#, c-format
msgid "SCHED_%s not supported?\n"
msgstr ""

#: schedutils/chrt.c:287 schedutils/chrt.c:320
msgid "cannot obtain the list of tasks"
msgstr ""

#: schedutils/chrt.c:299
#, fuzzy
msgid "invalid priority argument"
msgstr "%s 需要一个参数\n"

#: schedutils/chrt.c:305
msgid ""
"SCHED_RESET_ON_FORK flag is suppoted for SCHED_FIFO and SCHED_RR policies "
"only"
msgstr ""

#: schedutils/chrt.c:323
#, fuzzy, c-format
msgid "failed to set tid %d's policy"
msgstr "不能读 inodes"

#: schedutils/chrt.c:326
#, c-format
msgid "failed to set pid %d's policy"
msgstr ""

#: schedutils/chrt.c:335 sys-utils/switch_root.c:223 term-utils/script.c:451
#, c-format
msgid "failed to execute %s"
msgstr ""

#: schedutils/ionice.c:76
msgid "ioprio_get failed"
msgstr ""

#: schedutils/ionice.c:98
#, fuzzy
msgid "ioprio_set failed"
msgstr "查找失败"

#: schedutils/ionice.c:104
#, c-format
msgid ""
"\n"
"%1$s - sets or gets process io scheduling class and priority.\n"
"\n"
"Usage:\n"
"  %1$s [OPTION] -p PID [PID...]\n"
"  %1$s [OPTION] COMMAND\n"
"\n"
"Options:\n"
"  -c, --class <class>   scheduling class name or number\n"
"                           0: none, 1: realtime, 2: best-effort, 3: idle\n"
"  -n, --classdata <num> scheduling class data\n"
"                           0-7 for realtime and best-effort classes\n"
"  -p, --pid=PID         view or modify already running process\n"
"  -t, --ignore          ignore failures\n"
"  -V, --version         output version information and exit\n"
"  -h, --help            display this help and exit\n"
"\n"
msgstr ""

#: schedutils/ionice.c:148
msgid "invalid class data argument"
msgstr ""

#: schedutils/ionice.c:154
#, fuzzy
msgid "invalid class argument"
msgstr "不能读 inodes"

#: schedutils/ionice.c:159
#, fuzzy, c-format
msgid "unknown scheduling class: '%s'"
msgstr "%s: 未知命令: %s\n"

#: schedutils/ionice.c:183
msgid "ignoring given class data for none class"
msgstr ""

#: schedutils/ionice.c:191
msgid "ignoring given class data for idle class"
msgstr ""

#: schedutils/ionice.c:196
#, fuzzy, c-format
msgid "unknown prio class %d"
msgstr "%s: 未知命令: %s\n"

#: schedutils/ionice.c:232 schedutils/taskset.c:238 sys-utils/prlimit.c:646
#, fuzzy, c-format
msgid "executing %s failed"
msgstr "%s 失败.\n"

#: schedutils/taskset.c:52
#, c-format
msgid ""
"Usage: %s [options] [mask | cpu-list] [pid|cmd [args...]]\n"
"\n"
msgstr ""

#: schedutils/taskset.c:56
#, c-format
msgid ""
"Options:\n"
" -a, --all-tasks         operate on all the tasks (threads) for a given pid\n"
" -p, --pid               operate on existing given pid\n"
" -c, --cpu-list          display and specify cpus in list format\n"
" -h, --help              display this help\n"
" -V, --version           output version information\n"
"\n"
msgstr ""

#: schedutils/taskset.c:64
#, c-format
msgid ""
"The default behavior is to run a new command:\n"
"    %1$s 03 sshd -b 1024\n"
"You can retrieve the mask of an existing task:\n"
"    %1$s -p 700\n"
"Or set it:\n"
"    %1$s -p 03 700\n"
"List format uses a comma-separated list instead of a mask:\n"
"    %1$s -pc 0,3,7-11 700\n"
"Ranges in list format can take a stride argument:\n"
"    e.g. 0-31:2 is equivalent to mask 0x55555555\n"
msgstr ""

#: schedutils/taskset.c:76
#, c-format
msgid ""
"\n"
"For more information see taskset(1).\n"
msgstr ""

#: schedutils/taskset.c:87
#, c-format
msgid "pid %d's new affinity list: %s\n"
msgstr ""

#: schedutils/taskset.c:88
#, c-format
msgid "pid %d's current affinity list: %s\n"
msgstr ""

#: schedutils/taskset.c:91
#, c-format
msgid "pid %d's new affinity mask: %s\n"
msgstr ""

#: schedutils/taskset.c:92
#, c-format
msgid "pid %d's current affinity mask: %s\n"
msgstr ""

#: schedutils/taskset.c:97
#, fuzzy
msgid "conversion from cpuset to string failed"
msgstr "查找失败"

#: schedutils/taskset.c:107 schedutils/taskset.c:123
#, fuzzy, c-format
msgid "failed to get pid %d's affinity"
msgstr "不能读 inodes"

#: schedutils/taskset.c:117
#, fuzzy, c-format
msgid "failed to set pid %d's affinity"
msgstr "不能读 inodes"

#: schedutils/taskset.c:185 sys-utils/chcpu.c:267
msgid "cannot determine NR_CPUS; aborting"
msgstr ""

#: schedutils/taskset.c:194 schedutils/taskset.c:207 sys-utils/chcpu.c:273
#, fuzzy
msgid "cpuset_alloc failed"
msgstr "查找失败"

#: schedutils/taskset.c:214 sys-utils/chcpu.c:209
#, fuzzy, c-format
msgid "failed to parse CPU list: %s"
msgstr "不能读 inodes"

#: schedutils/taskset.c:217
#, fuzzy, c-format
msgid "failed to parse CPU mask: %s"
msgstr "不能读 inodes"

#: sys-utils/arch.c:79
#, fuzzy
msgid "uname failed"
msgstr "查找失败"

#: sys-utils/chcpu.c:79 sys-utils/chcpu.c:161
#, c-format
msgid "CPU %d does not exist\n"
msgstr ""

#: sys-utils/chcpu.c:83
#, c-format
msgid "CPU %d is not hot pluggable\n"
msgstr ""

#: sys-utils/chcpu.c:88
#, fuzzy, c-format
msgid "CPU %d is already enabled\n"
msgstr "%s 已经挂载.\t"

#: sys-utils/chcpu.c:92
#, c-format
msgid "CPU %d is already disabled\n"
msgstr ""

#: sys-utils/chcpu.c:100
#, c-format
msgid "CPU %d enable failed (CPU is deconfigured)\n"
msgstr ""

#: sys-utils/chcpu.c:103
#, c-format
msgid "CPU %d enable failed (%m)\n"
msgstr ""

#: sys-utils/chcpu.c:105
#, c-format
msgid "CPU %d enabled\n"
msgstr ""

#: sys-utils/chcpu.c:108
#, c-format
msgid "CPU %d disable failed (last enabled CPU)\n"
msgstr ""

#: sys-utils/chcpu.c:114
#, c-format
msgid "CPU %d disable failed (%m)\n"
msgstr ""

#: sys-utils/chcpu.c:116
#, c-format
msgid "CPU %d disabled\n"
msgstr ""

#: sys-utils/chcpu.c:128
msgid "This system does not support rescanning of CPUs"
msgstr ""

#: sys-utils/chcpu.c:130
msgid "Failed to trigger rescan of CPUs"
msgstr ""

#: sys-utils/chcpu.c:131
#, c-format
msgid "Triggered rescan of CPUs\n"
msgstr ""

#: sys-utils/chcpu.c:138
msgid "This system does not support setting the dispatching mode of CPUs"
msgstr ""

#: sys-utils/chcpu.c:142
#, fuzzy
msgid "Failed to set horizontal dispatch mode"
msgstr "不能读 inodes"

#: sys-utils/chcpu.c:143
#, c-format
msgid "Succesfully set horizontal dispatching mode\n"
msgstr ""

#: sys-utils/chcpu.c:146
#, fuzzy
msgid "Failed to set vertical dispatch mode"
msgstr "不能读 inodes"

#: sys-utils/chcpu.c:147
#, c-format
msgid "Succesfully set vertical dispatching mode\n"
msgstr ""

#: sys-utils/chcpu.c:165
#, c-format
msgid "CPU %d is not configurable\n"
msgstr ""

#: sys-utils/chcpu.c:170
#, fuzzy, c-format
msgid "CPU %d is already configured\n"
msgstr "%s 已经挂载.\t"

#: sys-utils/chcpu.c:174
#, c-format
msgid "CPU %d is already deconfigured\n"
msgstr ""

#: sys-utils/chcpu.c:179
#, c-format
msgid "CPU %d deconfigure failed (CPU is enabled)\n"
msgstr ""

#: sys-utils/chcpu.c:186
#, c-format
msgid "CPU %d configure failed (%m)\n"
msgstr ""

#: sys-utils/chcpu.c:188
#, c-format
msgid "CPU %d configured\n"
msgstr ""

#: sys-utils/chcpu.c:192
#, c-format
msgid "CPU %d deconfigure failed (%m)\n"
msgstr ""

#: sys-utils/chcpu.c:194
#, c-format
msgid "CPU %d deconfigured\n"
msgstr ""

#: sys-utils/chcpu.c:208
#, fuzzy, c-format
msgid "invalid CPU number in CPU list: %s"
msgstr "不能读 inodes"

#: sys-utils/chcpu.c:215 text-utils/col.c:121
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options]\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/chcpu.c:218
msgid ""
"\n"
"Options:\n"
"  -h, --help                    print this help\n"
"  -e, --enable <cpu-list>       enable cpus\n"
"  -d, --disable <cpu-list>      disable cpus\n"
"  -c, --configure <cpu-list>    configure cpus\n"
"  -g, --deconfigure <cpu-list>  deconfigure cpus\n"
"  -p, --dispatch <mode>         set dispatching mode\n"
"  -r, --rescan                  trigger rescan of cpus\n"
"  -V, --version                 output version information and exit\n"
msgstr ""

#: sys-utils/chcpu.c:306
#, fuzzy, c-format
msgid "unsupported argument: %s"
msgstr "%s 需要一个参数\n"

#: sys-utils/ctrlaltdel.c:21
#, fuzzy, c-format
msgid " %s <hard|soft>\n"
msgstr "用法:\n"

#: sys-utils/ctrlaltdel.c:56
msgid "You must be root to set the Ctrl-Alt-Del behaviour"
msgstr ""

#: sys-utils/cytune.c:92
#, fuzzy, c-format
msgid " %s [options] <tty> [...]\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/cytune.c:94
#, c-format
msgid " -s, --set-threshold <num>          set interruption threshold value\n"
msgstr ""

#: sys-utils/cytune.c:95
#, c-format
msgid " -g, --get-threshold                display current threshold value\n"
msgstr ""

#: sys-utils/cytune.c:96
#, c-format
msgid " -S, --set-default-threshold <num>  set default threshold value\n"
msgstr ""

#: sys-utils/cytune.c:97
#, c-format
msgid " -t, --set-flush <num>              set flush timeout to value\n"
msgstr ""

#: sys-utils/cytune.c:98
#, c-format
msgid ""
" -G, --get-glush                    display default flush timeout value\n"
msgstr ""

#: sys-utils/cytune.c:99
#, c-format
msgid ""
" -T, --set-default-flush <num>      set the default flush timeout to value\n"
msgstr ""

#: sys-utils/cytune.c:100
#, c-format
msgid " -q, --stats                        display statistics about the tty\n"
msgstr ""

#: sys-utils/cytune.c:101
#, c-format
msgid ""
" -i, --interval <seconds>           gather statistics every <seconds> "
"interval\n"
msgstr ""

#: sys-utils/cytune.c:132
#, c-format
msgid ""
"File %s, For threshold value %lu, Maximum characters in fifo were %d,\n"
"and the maximum transfer rate in characters/second was %f"
msgstr ""

#: sys-utils/cytune.c:141
#, c-format
msgid ""
"File %s, For threshold value %lu and timeout value %lu, Maximum characters "
"in fifo were %d,\n"
"and the maximum transfer rate in characters/second was %f"
msgstr ""

#: sys-utils/cytune.c:172 sys-utils/cytune.c:196 sys-utils/dmesg.c:346
msgid "gettimeofday failed"
msgstr ""

#: sys-utils/cytune.c:181 sys-utils/cytune.c:204
#, c-format
msgid "cannot issue CYGETMON on %s"
msgstr ""

#: sys-utils/cytune.c:186 sys-utils/cytune.c:209 sys-utils/cytune.c:439
#, fuzzy, c-format
msgid "cannot get threshold for %s"
msgstr "%s 失败.\n"

#: sys-utils/cytune.c:189 sys-utils/cytune.c:214 sys-utils/cytune.c:444
#, fuzzy, c-format
msgid "cannot get timeout for %s"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/cytune.c:247
#, c-format
msgid ""
"%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
msgstr ""

#: sys-utils/cytune.c:253
#, c-format
msgid "   %f int/sec; %f rec, %f send (char/sec)\n"
msgstr ""

#: sys-utils/cytune.c:256
#, c-format
msgid ""
"%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
msgstr ""

#: sys-utils/cytune.c:261
#, c-format
msgid "   %f int/sec; %f rec (char/sec)\n"
msgstr ""

#: sys-utils/cytune.c:326
msgid "Invalid interval value"
msgstr ""

#: sys-utils/cytune.c:328
#, c-format
msgid "Invalid interval value: %d"
msgstr ""

#: sys-utils/cytune.c:335
msgid "Invalid set value"
msgstr ""

#: sys-utils/cytune.c:337
#, c-format
msgid "Invalid set value: %d"
msgstr ""

#: sys-utils/cytune.c:344
msgid "Invalid default value"
msgstr ""

#: sys-utils/cytune.c:346
#, c-format
msgid "Invalid default value: %d"
msgstr ""

#: sys-utils/cytune.c:354
#, fuzzy
msgid "Invalid set time value"
msgstr "不能读 inodes"

#: sys-utils/cytune.c:356
#, fuzzy, c-format
msgid "Invalid set time value: %d"
msgstr "不能读 inodes"

#: sys-utils/cytune.c:364
msgid "Invalid default time value"
msgstr ""

#: sys-utils/cytune.c:366
#, c-format
msgid "Invalid default time value: %d"
msgstr ""

#: sys-utils/cytune.c:409
#, fuzzy, c-format
msgid "cannot set %s to threshold %d"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/cytune.c:423
#, fuzzy, c-format
msgid "cannot set %s to time threshold %d"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/cytune.c:447
#, c-format
msgid "%s: %ld current threshold and %ld current timeout\n"
msgstr ""

#: sys-utils/cytune.c:450
#, c-format
msgid "%s: %ld default threshold and %ld default timeout\n"
msgstr ""

#: sys-utils/dmesg.c:73
msgid "system is unusable"
msgstr ""

#: sys-utils/dmesg.c:74
msgid "action must be taken immediately"
msgstr ""

#: sys-utils/dmesg.c:75
msgid "critical conditions"
msgstr ""

#: sys-utils/dmesg.c:76
#, fuzzy
msgid "error conditions"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/dmesg.c:77
msgid "warning conditions"
msgstr ""

#: sys-utils/dmesg.c:78
msgid "normal but significant condition"
msgstr ""

#: sys-utils/dmesg.c:79
msgid "informational"
msgstr ""

#: sys-utils/dmesg.c:80
msgid "debug-level messages"
msgstr ""

#: sys-utils/dmesg.c:94
msgid "kernel messages"
msgstr ""

#: sys-utils/dmesg.c:95
msgid "random user-level messages"
msgstr ""

#: sys-utils/dmesg.c:96
#, fuzzy
msgid "mail system"
msgstr "Filesystem state=%d\n"

#: sys-utils/dmesg.c:97
msgid "system daemons"
msgstr ""

#: sys-utils/dmesg.c:98
msgid "security/authorization messages"
msgstr ""

#: sys-utils/dmesg.c:99
msgid "messages generated internally by syslogd"
msgstr ""

#: sys-utils/dmesg.c:100
msgid "line printer subsystem"
msgstr ""

#: sys-utils/dmesg.c:101
msgid "network news subsystem"
msgstr ""

#: sys-utils/dmesg.c:102
msgid "UUCP subsystem"
msgstr ""

#: sys-utils/dmesg.c:103
msgid "clock daemon"
msgstr ""

#: sys-utils/dmesg.c:104
msgid "security/authorization messages (private)"
msgstr ""

#: sys-utils/dmesg.c:105
msgid "ftp daemon"
msgstr ""

#: sys-utils/dmesg.c:154
msgid ""
" -C, --clear                 clear the kernel ring buffer\n"
" -c, --read-clear            read and clear all messages\n"
" -D, --console-off           disable printing messages to console\n"
" -d, --show-delta            show time delta between printed messages\n"
" -E, --console-on            enable printing messages to console\n"
" -F, --file <file>           use the file instead of the kernel log buffer\n"
" -f, --facility <list>       restrict output to defined facilities\n"
" -h, --help                  display this help and exit\n"
" -k, --kernel                display kernel messages\n"
" -l, --level <list>          restrict output to defined levels\n"
" -n, --console-level <level> set level of messages printed to console\n"
" -r, --raw                   print the raw message buffer\n"
" -s, --buffer-size <size>    buffer size to query the kernel ring buffer\n"
" -T, --ctime                 show human readable timestamp (could be \n"
"                             inaccurate if you have used SUSPEND/RESUME)\n"
" -t, --notime                don't print messages timestamp\n"
" -u, --userspace             display userspace messages\n"
" -V, --version               output version information and exit\n"
" -x, --decode                decode facility and level to readable string\n"
msgstr ""

#: sys-utils/dmesg.c:174
msgid ""
"\n"
"Supported log facilities:\n"
msgstr ""

#: sys-utils/dmesg.c:181
msgid ""
"\n"
"Supported log levels (priorities):\n"
msgstr ""

#: sys-utils/dmesg.c:225
#, fuzzy, c-format
msgid "failed to parse level '%s'"
msgstr "不能读 inodes"

#: sys-utils/dmesg.c:227
#, fuzzy, c-format
msgid "unknown level '%s'"
msgstr "%s: 未知命令: %s\n"

#: sys-utils/dmesg.c:263
#, fuzzy, c-format
msgid "failed to parse facility '%s'"
msgstr "不能读 inodes"

#: sys-utils/dmesg.c:265
#, fuzzy, c-format
msgid "unknown facility '%s'"
msgstr "%s: 未知命令: %s\n"

#: sys-utils/dmesg.c:344
#, fuzzy
msgid "sysinfo failed"
msgstr "查找失败"

#: sys-utils/dmesg.c:362
#, fuzzy, c-format
msgid "cannot open: %s"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/dmesg.c:364
#, fuzzy, c-format
msgid "cannot stat: %s"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/dmesg.c:368
#, fuzzy, c-format
msgid "cannot mmap: %s"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/dmesg.c:462 term-utils/script.c:304 term-utils/script.c:396
#, fuzzy
msgid "write failed"
msgstr "%s 失败.\n"

#: sys-utils/dmesg.c:760
#, fuzzy
msgid "invalid buffer size argument"
msgstr "不能读 inodes"

#: sys-utils/dmesg.c:801
msgid ""
"--raw can't be used together with level, facility, decode, delta, ctime or "
"notime options"
msgstr ""

#: sys-utils/dmesg.c:805
msgid "--notime can't be used together with ctime "
msgstr ""

#: sys-utils/dmesg.c:832
msgid "unsupported command"
msgstr ""

#: sys-utils/dmesg.c:837
#, fuzzy
msgid "klogctl failed"
msgstr "%s 失败.\n"

#: sys-utils/eject.c:135
#, fuzzy, c-format
msgid " %s [options] [<device>|<mountpoint>]\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/eject.c:138
msgid ""
" -a, --auto <on|off>         turn auto-eject feature on or off\n"
" -c, --changerslot <slot>    switch discs on a CD-ROM changer\n"
" -d, --default               display default device\n"
" -f, --floppy                eject floppy\n"
" -F, --force                 don't care about device type\n"
" -i, --manualeject <on|off>  toggle manual eject protection on/off\n"
" -m, --no-unmount            do not unmount device even if it is mounted\n"
" -M, --no-partitions-unmount do not unmount another partitions\n"
" -n, --noop                  don't eject, just show device found\n"
" -p, --proc                  use /proc/mounts instead of /etc/mtab\n"
" -q, --tape                  eject tape\n"
" -r, --cdrom                 eject CD-ROM\n"
" -s, --scsi                  eject SCSI device\n"
" -t, --trayclose             close tray\n"
" -T, --traytoggle            toggle tray\n"
" -v, --verbose               enable verbose output\n"
" -x, --cdspeed <speed>       set CD-ROM max speed\n"
" -X, --listspeed             list CD-ROM available speeds\n"
msgstr ""

#: sys-utils/eject.c:162
msgid ""
"\n"
"By default tries -r, -s, -f, and -q in order until success.\n"
msgstr ""

#: sys-utils/eject.c:208
msgid "invalid argument to --auto/-a option"
msgstr ""

#: sys-utils/eject.c:212
msgid "invalid argument to --changerslot/-c option"
msgstr ""

#: sys-utils/eject.c:216
msgid "invalid argument to --cdspeed/-x option"
msgstr ""

#: sys-utils/eject.c:237
msgid "invalid argument to --manualeject/-i option"
msgstr ""

#: sys-utils/eject.c:332
msgid "CD-ROM auto-eject command failed"
msgstr ""

#: sys-utils/eject.c:349
msgid "CD-ROM lock door command failed"
msgstr ""

#: sys-utils/eject.c:352
msgid "CD-Drive may NOT be ejected with device button"
msgstr ""

#: sys-utils/eject.c:354
msgid "CD-Drive may be ejected with device button"
msgstr ""

#: sys-utils/eject.c:365
msgid "CD-ROM select disc command failed"
msgstr ""

#: sys-utils/eject.c:369
msgid "CD-ROM load from slot command failed"
msgstr ""

#: sys-utils/eject.c:371
msgid "IDE/ATAPI CD-ROM changer not supported by this kernel\n"
msgstr ""

#: sys-utils/eject.c:389
msgid "CD-ROM tray close command failed"
msgstr ""

#: sys-utils/eject.c:391
msgid "CD-ROM tray close command not supported by this kernel\n"
msgstr ""

#: sys-utils/eject.c:405
msgid "CD-ROM eject unsupported"
msgstr ""

#: sys-utils/eject.c:436 sys-utils/eject.c:457 sys-utils/eject.c:1097
msgid "CD-ROM eject command failed"
msgstr ""

#: sys-utils/eject.c:439
msgid "no CD-ROM information available"
msgstr ""

#: sys-utils/eject.c:442
msgid "CD-ROM drive is not ready"
msgstr ""

#: sys-utils/eject.c:482
msgid "CD-ROM select speed command failed"
msgstr ""

#: sys-utils/eject.c:484 sys-utils/eject.c:571
msgid "CD-ROM select speed command not supported by this kernel"
msgstr ""

#: sys-utils/eject.c:521
#, fuzzy, c-format
msgid "%s: failed to finding CD-ROM name"
msgstr "不能读 inodes"

#: sys-utils/eject.c:537
#, fuzzy, c-format
msgid "%s: failed to read speed"
msgstr "不能读 inodes"

#: sys-utils/eject.c:545
#, fuzzy
msgid "failed to read speed"
msgstr "不能读 inodes"

#: sys-utils/eject.c:589
#, fuzzy
msgid "not an sg device, or old sg driver"
msgstr "%s:不是一个块设备\n"

#: sys-utils/eject.c:651
#, fuzzy, c-format
msgid "%s: unmounting"
msgstr "%s 失败.\n"

#: sys-utils/eject.c:659
#, fuzzy
msgid "eject: cannot set user id"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/eject.c:666
#, fuzzy, c-format
msgid "unable to exec /bin/umount of `%s'"
msgstr "不能读 inodes"

#: sys-utils/eject.c:669
#, fuzzy
msgid "unable to fork"
msgstr "不能读 inodes"

#: sys-utils/eject.c:676
#, fuzzy, c-format
msgid "unmount of `%s' did not exit normally"
msgstr "根 inode 不是一个目录"

#: sys-utils/eject.c:679
#, fuzzy, c-format
msgid "unmount of `%s' failed\n"
msgstr "%s 失败.\n"

#: sys-utils/eject.c:720
#, fuzzy
msgid "failed to parse mount table"
msgstr "不能读 inodes"

#: sys-utils/eject.c:781 sys-utils/eject.c:978
#, fuzzy, c-format
msgid "%s: mounted on %s"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/eject.c:878
#, fuzzy, c-format
msgid "%s: is removable device"
msgstr "%s:不是一个块设备\n"

#: sys-utils/eject.c:897
#, c-format
msgid "%s: connected by hotplug subsystem: %s"
msgstr ""

#: sys-utils/eject.c:918
msgid "setting CD-ROM speed to auto"
msgstr ""

#: sys-utils/eject.c:920
#, c-format
msgid "setting CD-ROM speed to %ldX"
msgstr ""

#: sys-utils/eject.c:947
#, c-format
msgid "default device: `%s'"
msgstr ""

#: sys-utils/eject.c:953
#, c-format
msgid "using default device `%s'"
msgstr ""

#: sys-utils/eject.c:972
#, fuzzy, c-format
msgid "%s: unable to find device"
msgstr "%s:不是一个块设备\n"

#: sys-utils/eject.c:974
#, c-format
msgid "device name is `%s'"
msgstr ""

#: sys-utils/eject.c:980 sys-utils/umount.c:205
#, fuzzy, c-format
msgid "%s: not mounted"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/eject.c:984
#, c-format
msgid "%s: disc device: %s (disk device will be used for eject)"
msgstr ""

#: sys-utils/eject.c:992
#, c-format
msgid "%s: not found mountpoint or device with the given name"
msgstr ""

#: sys-utils/eject.c:995
#, fuzzy, c-format
msgid "%s: is whole-disk device"
msgstr "不能读 inodes"

#: sys-utils/eject.c:999
#, fuzzy, c-format
msgid "%s: is not hot-pluggable device"
msgstr "%s:不是一个块设备\n"

#: sys-utils/eject.c:1003
#, c-format
msgid "device is `%s'"
msgstr ""

#: sys-utils/eject.c:1004
msgid "exiting due to -n/--noop option"
msgstr ""

#: sys-utils/eject.c:1018
#, c-format
msgid "%s: enabling auto-eject mode"
msgstr ""

#: sys-utils/eject.c:1020
#, c-format
msgid "%s: disabling auto-eject mode"
msgstr ""

#: sys-utils/eject.c:1028
#, c-format
msgid "%s: closing tray"
msgstr ""

#: sys-utils/eject.c:1037
#, c-format
msgid "%s: toggling tray"
msgstr ""

#: sys-utils/eject.c:1046
#, c-format
msgid "%s: listing CD-ROM speed"
msgstr ""

#: sys-utils/eject.c:1072
#, c-format
msgid "error: %s: device in use"
msgstr ""

#: sys-utils/eject.c:1078
#, c-format
msgid "%s: selecting CD-ROM disc #%ld"
msgstr ""

#: sys-utils/eject.c:1094
#, c-format
msgid "%s: trying to eject using CD-ROM eject command"
msgstr ""

#: sys-utils/eject.c:1096
msgid "CD-ROM eject command succeeded"
msgstr ""

#: sys-utils/eject.c:1101
#, c-format
msgid "%s: trying to eject using SCSI commands"
msgstr ""

#: sys-utils/eject.c:1103
#, fuzzy
msgid "SCSI eject succeeded"
msgstr "%s 成功.\n"

#: sys-utils/eject.c:1104
#, fuzzy
msgid "SCSI eject failed"
msgstr "查找失败"

#: sys-utils/eject.c:1108
#, c-format
msgid "%s: trying to eject using floppy eject command"
msgstr ""

#: sys-utils/eject.c:1110
msgid "floppy eject command succeeded"
msgstr ""

#: sys-utils/eject.c:1111
msgid "floppy eject command failed"
msgstr ""

#: sys-utils/eject.c:1115
#, c-format
msgid "%s: trying to eject using tape offline command"
msgstr ""

#: sys-utils/eject.c:1117
msgid "tape offline command succeeded"
msgstr ""

#: sys-utils/eject.c:1118
msgid "tape offline command failed"
msgstr ""

#: sys-utils/eject.c:1122
#, fuzzy
msgid "unable to eject"
msgstr "不能读 inodes"

#: sys-utils/fallocate.c:60
#, fuzzy, c-format
msgid " %s [options] <filename>\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/fallocate.c:62
msgid ""
" -n, --keep-size     don't modify the length of the file\n"
" -p, --punch-hole    punch holes in the file\n"
" -o, --offset <num>  offset of the allocation, in bytes\n"
" -l, --length <num>  length of the allocation, in bytes\n"
msgstr ""

#: sys-utils/fallocate.c:136
msgid "no length argument specified"
msgstr ""

#: sys-utils/fallocate.c:138
msgid "invalid length value specified"
msgstr ""

#: sys-utils/fallocate.c:140
msgid "invalid offset value specified"
msgstr ""

#: sys-utils/fallocate.c:142
msgid "no filename specified."
msgstr ""

#: sys-utils/fallocate.c:147 sys-utils/fsfreeze.c:98 sys-utils/fstrim.c:131
msgid "unexpected number of arguments"
msgstr ""

#: sys-utils/fallocate.c:167
msgid "keep size mode (-n option) unsupported"
msgstr ""

#: sys-utils/fallocate.c:168
#, c-format
msgid "%s: fallocate failed"
msgstr ""

#: sys-utils/flock.c:51
#, c-format
msgid ""
" %1$s [options] <file descriptor number>\n"
" %1$s [options] <file> -c <command>\n"
" %1$s [options} <directory> -c <command>\n"
msgstr ""

#: sys-utils/flock.c:56
msgid " -s  --shared             get a shared lock\n"
msgstr ""

#: sys-utils/flock.c:57
msgid " -x  --exclusive          get an exclusive lock (default)\n"
msgstr ""

#: sys-utils/flock.c:58
msgid " -u  --unlock             remove a lock\n"
msgstr ""

#: sys-utils/flock.c:59
msgid " -n  --nonblock           fail rather than wait\n"
msgstr ""

#: sys-utils/flock.c:60
msgid " -w  --timeout <secs>     wait for a limited amount of time\n"
msgstr ""

#: sys-utils/flock.c:61
msgid ""
" -E  --conflict-exit-code <number>  exit code after conflict or timeout\n"
msgstr ""

#: sys-utils/flock.c:62
msgid ""
" -o  --close              close file descriptor before running command\n"
msgstr ""

#: sys-utils/flock.c:63
msgid ""
" -c  --command <command>  run a single command string through the shell\n"
msgstr ""

#: sys-utils/flock.c:86
msgid "timeout cannot be zero"
msgstr ""

#: sys-utils/flock.c:123
#, fuzzy, c-format
msgid "cannot open lock file %s"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/flock.c:206
#, fuzzy
msgid "invalid exit code"
msgstr "查找失败"

#: sys-utils/flock.c:226
#, fuzzy, c-format
msgid "%s requires exactly one command argument"
msgstr "%s 需要一个参数\n"

#: sys-utils/flock.c:247
#, fuzzy
msgid "requires file descriptor, file or directory"
msgstr "根 inode 不是一个目录"

#: sys-utils/flock.c:331 sys-utils/swapon.c:143
msgid "waitpid failed"
msgstr ""

#: sys-utils/fsfreeze.c:43 sys-utils/fstrim.c:58
#, fuzzy, c-format
msgid " %s [options] <mount point>\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/fsfreeze.c:46
msgid ""
" -h, --help        this help\n"
" -f, --freeze      freeze the filesystem\n"
" -u, --unfreeze    unfreeze the filesystem\n"
msgstr ""

#: sys-utils/fsfreeze.c:50
msgid ""
"\n"
"For more information see fsfreeze(8).\n"
msgstr ""

#: sys-utils/fsfreeze.c:92
msgid "no action specified"
msgstr ""

#: sys-utils/fsfreeze.c:94
msgid "no filename specified"
msgstr ""

#: sys-utils/fsfreeze.c:107
#, fuzzy, c-format
msgid "%s: fstat failed"
msgstr "%s 失败.\n"

#: sys-utils/fsfreeze.c:112
#, fuzzy, c-format
msgid "%s: is not a directory"
msgstr "根 inode 不是一个目录"

#: sys-utils/fsfreeze.c:118
#, fuzzy, c-format
msgid "%s: freeze failed"
msgstr "%s 失败.\n"

#: sys-utils/fsfreeze.c:123
#, fuzzy, c-format
msgid "%s: unfreeze failed"
msgstr "%s 失败.\n"

#: sys-utils/fstrim.c:60
msgid ""
" -o, --offset <num>  offset in bytes to discard from\n"
" -l, --length <num>  length of bytes to discard from the offset\n"
" -m, --minimum <num> minimum extent length to discard\n"
" -v, --verbose       print number of discarded bytes\n"
msgstr ""

#: sys-utils/fstrim.c:106 text-utils/hexsyntax.c:86
#, fuzzy
msgid "failed to parse length"
msgstr "不能读 inodes"

#: sys-utils/fstrim.c:110 sys-utils/losetup.c:307 text-utils/hexsyntax.c:93
#, fuzzy
msgid "failed to parse offset"
msgstr "不能读 inodes"

#: sys-utils/fstrim.c:114
#, fuzzy
msgid "failed to parse minimum extent length"
msgstr "不能读 inodes"

#: sys-utils/fstrim.c:126
msgid "no mountpoint specified."
msgstr ""

#: sys-utils/fstrim.c:138 sys-utils/mountpoint.c:196
#, fuzzy, c-format
msgid "%s: not a directory"
msgstr "根 inode 不是一个目录"

#: sys-utils/fstrim.c:145
#, fuzzy, c-format
msgid "%s: FITRIM ioctl failed"
msgstr "%s 失败.\n"

#. TRANSLATORS: The standard value here is a very large number.
#: sys-utils/fstrim.c:149
#, c-format
msgid "%s: %<PRIu64> bytes were trimmed\n"
msgstr ""

#: sys-utils/hwclock.c:174 sys-utils/hwclock.c:176
#, fuzzy, c-format
msgid "cannot write %s"
msgstr "不能写 inodes"

#: sys-utils/hwclock.c:245
#, c-format
msgid "Assuming hardware clock is kept in %s time.\n"
msgstr ""

#: sys-utils/hwclock.c:246 sys-utils/hwclock.c:336
msgid "UTC"
msgstr ""

#: sys-utils/hwclock.c:246 sys-utils/hwclock.c:335
msgid "local"
msgstr ""

#: sys-utils/hwclock.c:320
msgid ""
"Warning: unrecognized third line in adjtime file\n"
"(Expected: `UTC' or `LOCAL' or nothing.)"
msgstr ""

#: sys-utils/hwclock.c:329
#, c-format
msgid "Last drift adjustment done at %ld seconds after 1969\n"
msgstr ""

#: sys-utils/hwclock.c:331
#, c-format
msgid "Last calibration done at %ld seconds after 1969\n"
msgstr ""

#: sys-utils/hwclock.c:333
#, c-format
msgid "Hardware clock is on %s time\n"
msgstr ""

#: sys-utils/hwclock.c:360
#, c-format
msgid "Waiting for clock tick...\n"
msgstr ""

#: sys-utils/hwclock.c:366
#, c-format
msgid "...synchronization failed\n"
msgstr ""

#: sys-utils/hwclock.c:368
#, c-format
msgid "...got clock tick\n"
msgstr ""

#: sys-utils/hwclock.c:424
#, c-format
msgid "Invalid values in hardware clock: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
msgstr ""

#: sys-utils/hwclock.c:433
#, c-format
msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n"
msgstr ""

#: sys-utils/hwclock.c:467
#, c-format
msgid "Time read from Hardware Clock: %4d/%.2d/%.2d %02d:%02d:%02d\n"
msgstr ""

#: sys-utils/hwclock.c:495
#, c-format
msgid "Setting Hardware Clock to %.2d:%.2d:%.2d = %ld seconds since 1969\n"
msgstr ""

#: sys-utils/hwclock.c:501
#, c-format
msgid "Clock not changed - testing only.\n"
msgstr ""

#: sys-utils/hwclock.c:559
#, c-format
msgid ""
"Time elapsed since reference time has been %.6f seconds.\n"
"Delaying further to reach the new time.\n"
msgstr ""

#: sys-utils/hwclock.c:595
msgid ""
"The Hardware Clock registers contain values that are either invalid (e.g. "
"50th day of month) or beyond the range we can handle (e.g. Year 2095)."
msgstr ""

#: sys-utils/hwclock.c:605
#, c-format
msgid "%s  %.6f seconds\n"
msgstr ""

#: sys-utils/hwclock.c:636
msgid "No --date option specified."
msgstr ""

#: sys-utils/hwclock.c:642
msgid "--date argument too long"
msgstr ""

#: sys-utils/hwclock.c:649
msgid ""
"The value of the --date option is not a valid date.\n"
"In particular, it contains quotation marks."
msgstr ""

#: sys-utils/hwclock.c:657
#, c-format
msgid "Issuing date command: %s\n"
msgstr ""

#: sys-utils/hwclock.c:661
msgid "Unable to run 'date' program in /bin/sh shell. popen() failed"
msgstr ""

#: sys-utils/hwclock.c:669
#, c-format
msgid "response from date command = %s\n"
msgstr ""

#: sys-utils/hwclock.c:671
#, c-format
msgid ""
"The date command issued by %s returned unexpected results.\n"
"The command was:\n"
"  %s\n"
"The response was:\n"
"  %s"
msgstr ""

#: sys-utils/hwclock.c:682
#, c-format
msgid ""
"The date command issued by %s returned something other than an integer where "
"the converted time value was expected.\n"
"The command was:\n"
"  %s\n"
"The response was:\n"
" %s\n"
msgstr ""

#: sys-utils/hwclock.c:694
#, c-format
msgid "date string %s equates to %ld seconds since 1969.\n"
msgstr ""

#: sys-utils/hwclock.c:726
msgid ""
"The Hardware Clock does not contain a valid time, so we cannot set the "
"System Time from it."
msgstr ""

#: sys-utils/hwclock.c:748 sys-utils/hwclock.c:829
#, c-format
msgid "Calling settimeofday:\n"
msgstr ""

#: sys-utils/hwclock.c:749 sys-utils/hwclock.c:831
#, c-format
msgid "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
msgstr ""

#: sys-utils/hwclock.c:751 sys-utils/hwclock.c:833
#, c-format
msgid "\ttz.tz_minuteswest = %d\n"
msgstr ""

#: sys-utils/hwclock.c:755 sys-utils/hwclock.c:837
#, c-format
msgid "Not setting system clock because running in test mode.\n"
msgstr ""

#: sys-utils/hwclock.c:764 sys-utils/hwclock.c:846
msgid "Must be superuser to set system clock."
msgstr ""

#: sys-utils/hwclock.c:767 sys-utils/hwclock.c:849
msgid "settimeofday() failed"
msgstr ""

#: sys-utils/hwclock.c:804
#, c-format
msgid "Current system time: %ld = %s\n"
msgstr ""

#: sys-utils/hwclock.c:830
#, c-format
msgid "\tUTC: %s\n"
msgstr ""

#: sys-utils/hwclock.c:878
#, c-format
msgid ""
"Not adjusting drift factor because the Hardware Clock previously contained "
"garbage.\n"
msgstr ""

#: sys-utils/hwclock.c:883
#, c-format
msgid ""
"Not adjusting drift factor because last calibration time is zero,\n"
"so history is bad and calibration startover is necessary.\n"
msgstr ""

#: sys-utils/hwclock.c:889
#, c-format
msgid ""
"Not adjusting drift factor because it has been less than a day since the "
"last calibration.\n"
msgstr ""

#: sys-utils/hwclock.c:937
#, c-format
msgid ""
"Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor "
"of %f seconds/day.\n"
"Adjusting drift factor by %f seconds/day\n"
msgstr ""

#: sys-utils/hwclock.c:983
#, c-format
msgid "Time since last adjustment is %d seconds\n"
msgstr ""

#: sys-utils/hwclock.c:985
#, c-format
msgid "Need to insert %d seconds and refer time back %.6f seconds ago\n"
msgstr ""

#: sys-utils/hwclock.c:1015
#, c-format
msgid "Not updating adjtime file because of testing mode.\n"
msgstr ""

#: sys-utils/hwclock.c:1016
#, c-format
msgid ""
"Would have written the following to %s:\n"
"%s"
msgstr ""

#: sys-utils/hwclock.c:1025
#, c-format
msgid ""
"Could not open file with the clock adjustment parameters in it (%s) for "
"writing"
msgstr ""

#: sys-utils/hwclock.c:1031 sys-utils/hwclock.c:1038
#, c-format
msgid "Could not update file with the clock adjustment parameters (%s) in it"
msgstr ""

#: sys-utils/hwclock.c:1046
msgid "Drift adjustment parameters not updated."
msgstr ""

#: sys-utils/hwclock.c:1085
msgid ""
"The Hardware Clock does not contain a valid time, so we cannot adjust it."
msgstr ""

#: sys-utils/hwclock.c:1094
#, c-format
msgid ""
"Not setting clock because last adjustment time is zero, so history is bad."
msgstr ""

#: sys-utils/hwclock.c:1116
#, c-format
msgid "Needed adjustment is less than one second, so not setting clock.\n"
msgstr ""

#: sys-utils/hwclock.c:1141
#, c-format
msgid "Using %s.\n"
msgstr ""

#: sys-utils/hwclock.c:1143
#, c-format
msgid "No usable clock interface found.\n"
msgstr ""

#: sys-utils/hwclock.c:1272 sys-utils/hwclock.c:1278
#, c-format
msgid "Unable to set system clock.\n"
msgstr ""

#: sys-utils/hwclock.c:1291
#, c-format
msgid ""
"At %ld seconds after 1969, RTC is predicted to read %ld seconds after 1969.\n"
msgstr ""

#: sys-utils/hwclock.c:1320
msgid ""
"The kernel keeps an epoch value for the Hardware Clock only on an Alpha "
"machine.\n"
"This copy of hwclock was built for a machine other than Alpha\n"
"(and thus is presumably not running on an Alpha now).  No action taken."
msgstr ""

#: sys-utils/hwclock.c:1337
msgid "Unable to get the epoch value from the kernel."
msgstr ""

#: sys-utils/hwclock.c:1339
#, c-format
msgid "Kernel is assuming an epoch value of %lu\n"
msgstr ""

#: sys-utils/hwclock.c:1344
msgid ""
"To set the epoch value, you must use the 'epoch' option to tell to what "
"value to set it."
msgstr ""

#: sys-utils/hwclock.c:1348
#, c-format
msgid "Not setting the epoch to %d - testing only.\n"
msgstr ""

#: sys-utils/hwclock.c:1352
#, c-format
msgid "Unable to set the epoch value in the kernel.\n"
msgstr ""

#: sys-utils/hwclock.c:1381
msgid " hwclock [function] [option...]\n"
msgstr ""

#: sys-utils/hwclock.c:1383
msgid ""
"\n"
"Functions:\n"
msgstr ""

#: sys-utils/hwclock.c:1384
msgid ""
" -h, --help           show this help text and exit\n"
" -r, --show           read hardware clock and print result\n"
"     --set            set the RTC to the time given with --date\n"
msgstr ""

#: sys-utils/hwclock.c:1387
msgid ""
" -s, --hctosys        set the system time from the hardware clock\n"
" -w, --systohc        set the hardware clock from the current system time\n"
"     --systz          set the system time based on the current timezone\n"
"     --adjust         adjust the RTC to account for systematic drift since\n"
"                        the clock was last set or adjusted\n"
msgstr ""

#: sys-utils/hwclock.c:1393
msgid ""
"     --getepoch       print out the kernel's hardware clock epoch value\n"
"     --setepoch       set the kernel's hardware clock epoch value to the \n"
"                        value given with --epoch\n"
msgstr ""

#: sys-utils/hwclock.c:1397
msgid ""
"     --predict        predict RTC reading at time given with --date\n"
" -V, --version        display version information and exit\n"
msgstr ""

#: sys-utils/hwclock.c:1401
msgid ""
" -u, --utc            the hardware clock is kept in UTC\n"
"     --localtime      the hardware clock is kept in local time\n"
msgstr ""

#: sys-utils/hwclock.c:1404
msgid " -f, --rtc <file>     special /dev/... file to use instead of default\n"
msgstr ""

#: sys-utils/hwclock.c:1407
#, c-format
msgid ""
"     --directisa      access the ISA bus directly instead of %s\n"
"     --badyear        ignore RTC's year because the BIOS is broken\n"
"     --date <time>    specifies the time to which to set the hardware clock\n"
"     --epoch <year>   specifies the year which is the beginning of the\n"
"                        hardware clock's epoch value\n"
msgstr ""

#: sys-utils/hwclock.c:1413
#, c-format
msgid ""
"     --noadjfile      do not access %s; this requires the use of\n"
"                        either --utc or --localtime\n"
"     --adjfile <file> specifies the path to the adjust file;\n"
"                        the default is %s\n"
msgstr ""

#: sys-utils/hwclock.c:1417
msgid ""
"     --test           do not update anything, just show what would happen\n"
" -D, --debug          debugging mode\n"
"\n"
msgstr ""

#: sys-utils/hwclock.c:1420
msgid ""
" -J|--jensen, -A|--arc, -S|--srm, -F|--funky-toy\n"
"      tell hwclock the type of Alpha you have (see hwclock(8))\n"
"\n"
msgstr ""

#: sys-utils/hwclock.c:1539
msgid "Unable to connect to audit system"
msgstr ""

#: sys-utils/hwclock.c:1641
#, fuzzy
msgid "invalid epoch argument"
msgstr "%s 需要一个参数\n"

#: sys-utils/hwclock.c:1683
#, c-format
msgid "%s takes no non-option arguments.  You supplied %d.\n"
msgstr ""

#: sys-utils/hwclock.c:1692
msgid "With --noadjfile, you must specify either --utc or --localtime"
msgstr ""

#: sys-utils/hwclock.c:1705
msgid "No usable set-to time.  Cannot set clock."
msgstr ""

#: sys-utils/hwclock.c:1720
msgid "Sorry, only the superuser can change the Hardware Clock."
msgstr ""

#: sys-utils/hwclock.c:1724
msgid "Sorry, only the superuser can change the System Clock."
msgstr ""

#: sys-utils/hwclock.c:1728
msgid ""
"Sorry, only the superuser can change the Hardware Clock epoch in the kernel."
msgstr ""

#: sys-utils/hwclock.c:1751
msgid "Cannot access the Hardware Clock via any known method."
msgstr ""

#: sys-utils/hwclock.c:1754
msgid ""
"Use the --debug option to see the details of our search for an access method."
msgstr ""

#: sys-utils/hwclock-cmos.c:217
#, c-format
msgid "booted from MILO\n"
msgstr ""

#: sys-utils/hwclock-cmos.c:229
#, c-format
msgid "Ruffian BCD clock\n"
msgstr ""

#: sys-utils/hwclock-cmos.c:248
#, c-format
msgid "clockport adjusted to 0x%x\n"
msgstr ""

#: sys-utils/hwclock-cmos.c:264
#, c-format
msgid "funky TOY!\n"
msgstr ""

#: sys-utils/hwclock-cmos.c:292
#, c-format
msgid "atomic %s failed for 1000 iterations!"
msgstr ""

#: sys-utils/hwclock-cmos.c:319
#, c-format
msgid "cmos_read(): write to control address %X failed: %m\n"
msgstr ""

#: sys-utils/hwclock-cmos.c:324
#, c-format
msgid "cmos_read(): read data address %X failed: %m\n"
msgstr ""

#: sys-utils/hwclock-cmos.c:362
#, c-format
msgid "cmos_write(): write to control address %X failed: %m\n"
msgstr ""

#: sys-utils/hwclock-cmos.c:368
#, c-format
msgid "cmos_write(): write to data address %X failed: %m\n"
msgstr ""

#: sys-utils/hwclock-cmos.c:637
msgid "Cannot open /dev/port"
msgstr ""

#: sys-utils/hwclock-cmos.c:644
#, fuzzy
msgid "I failed to get permission because I didn't try."
msgstr "在 write_block 中查找失败"

#: sys-utils/hwclock-cmos.c:647
msgid "unable to get I/O port access:  the iopl(3) call failed."
msgstr ""

#: sys-utils/hwclock-cmos.c:650
msgid "Probably you need root privileges.\n"
msgstr ""

#: sys-utils/hwclock-kd.c:50
#, c-format
msgid "Waiting in loop for time from KDGHWCLK to change\n"
msgstr ""

#: sys-utils/hwclock-kd.c:53
msgid "KDGHWCLK ioctl to read time failed"
msgstr ""

#: sys-utils/hwclock-kd.c:75
msgid "KDGHWCLK ioctl to read time failed in loop"
msgstr ""

#: sys-utils/hwclock-kd.c:82 sys-utils/hwclock-rtc.c:236
msgid "Timed out waiting for time change."
msgstr ""

#: sys-utils/hwclock-kd.c:101
#, c-format
msgid "ioctl() failed to read time from %s"
msgstr ""

#: sys-utils/hwclock-kd.c:137
msgid "ioctl KDSHWCLK failed"
msgstr ""

#: sys-utils/hwclock-kd.c:173
msgid "Can't open /dev/tty1 or /dev/vc/1"
msgstr ""

#: sys-utils/hwclock-kd.c:177
msgid "KDGHWCLK ioctl failed"
msgstr ""

#: sys-utils/hwclock-rtc.c:162 sys-utils/hwclock-rtc.c:256
#, c-format
msgid "open() of %s failed"
msgstr ""

#: sys-utils/hwclock-rtc.c:195
#, fuzzy, c-format
msgid "ioctl(%s) to %s to read the time failed"
msgstr "查找失败"

#: sys-utils/hwclock-rtc.c:217
#, c-format
msgid "Waiting in loop for time from %s to change\n"
msgstr ""

#: sys-utils/hwclock-rtc.c:280
#, c-format
msgid "%s does not have interrupt functions. "
msgstr ""

#: sys-utils/hwclock-rtc.c:292
#, c-format
msgid "read() to %s to wait for clock tick failed"
msgstr ""

#: sys-utils/hwclock-rtc.c:317
#, c-format
msgid "select() to %s to wait for clock tick failed"
msgstr ""

#: sys-utils/hwclock-rtc.c:321
#, c-format
msgid "select() to %s to wait for clock tick timed out"
msgstr ""

#: sys-utils/hwclock-rtc.c:331
#, c-format
msgid "ioctl() to %s to turn off update interrupts failed"
msgstr ""

#: sys-utils/hwclock-rtc.c:335
#, c-format
msgid "ioctl() to %s to turn on update interrupts failed unexpectedly"
msgstr ""

#: sys-utils/hwclock-rtc.c:389
#, c-format
msgid "ioctl(%s) to %s to set the time failed."
msgstr ""

#: sys-utils/hwclock-rtc.c:395
#, c-format
msgid "ioctl(%s) was successful.\n"
msgstr ""

#: sys-utils/hwclock-rtc.c:420
#, c-format
msgid "Open of %s failed"
msgstr ""

#: sys-utils/hwclock-rtc.c:436 sys-utils/hwclock-rtc.c:483
#, c-format
msgid ""
"To manipulate the epoch value in the kernel, we must access the Linux 'rtc' "
"device driver via the device special file %s.  This file does not exist on "
"this system."
msgstr ""

#: sys-utils/hwclock-rtc.c:441 sys-utils/hwclock-rtc.c:488
#, c-format
msgid "Unable to open %s"
msgstr ""

#: sys-utils/hwclock-rtc.c:448
#, c-format
msgid "ioctl(RTC_EPOCH_READ) to %s failed"
msgstr ""

#: sys-utils/hwclock-rtc.c:454
#, c-format
msgid "we have read epoch %ld from %s with RTC_EPOCH_READ ioctl.\n"
msgstr ""

#: sys-utils/hwclock-rtc.c:474
#, c-format
msgid "The epoch value may not be less than 1900.  You requested %ld"
msgstr ""

#: sys-utils/hwclock-rtc.c:493
#, c-format
msgid "setting epoch to %ld with RTC_EPOCH_SET ioctl to %s.\n"
msgstr ""

#: sys-utils/hwclock-rtc.c:499
#, c-format
msgid "The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl."
msgstr ""

#: sys-utils/hwclock-rtc.c:503
#, c-format
msgid "ioctl(RTC_EPOCH_SET) to %s failed"
msgstr ""

#: sys-utils/ipcmk.c:70
msgid " -M, --shmem <size>       create shared memory segment of size <size>\n"
msgstr ""

#: sys-utils/ipcmk.c:71
msgid ""
" -S, --semaphore <nsems>  create semaphore array with <nsems> elements\n"
msgstr ""

#: sys-utils/ipcmk.c:72
msgid " -Q, --queue              create message queue\n"
msgstr ""

#: sys-utils/ipcmk.c:73
msgid ""
" -p, --mode <mode>        permission for the resource (default is 0644)\n"
msgstr ""

#: sys-utils/ipcmk.c:107 sys-utils/losetup.c:327
#, fuzzy
msgid "failed to parse size"
msgstr "不能读 inodes"

#: sys-utils/ipcmk.c:114
#, fuzzy
msgid "failed to parse elements"
msgstr "不能读 inodes"

#: sys-utils/ipcmk.c:138
msgid "create share memory failed"
msgstr ""

#: sys-utils/ipcmk.c:140
#, c-format
msgid "Shared memory id: %d\n"
msgstr ""

#: sys-utils/ipcmk.c:146
msgid "create message queue failed"
msgstr ""

#: sys-utils/ipcmk.c:148
#, c-format
msgid "Message queue id: %d\n"
msgstr ""

#: sys-utils/ipcmk.c:154
msgid "create semaphore failed"
msgstr ""

#: sys-utils/ipcmk.c:156
#, c-format
msgid "Semaphore id: %d\n"
msgstr ""

#: sys-utils/ipcrm.c:53
msgid " -m, --shmem-id <id>        remove shared memory segment by shmid\n"
msgstr ""

#: sys-utils/ipcrm.c:54
msgid " -M, --shmem-key <key>      remove shared memory segment by key\n"
msgstr ""

#: sys-utils/ipcrm.c:55
msgid " -q, --queue-id <id>        remove message queue by id\n"
msgstr ""

#: sys-utils/ipcrm.c:56
msgid " -Q, --queue-key <key>      remove message queue by key\n"
msgstr ""

#: sys-utils/ipcrm.c:57
msgid " -s, --semaphore-id <id>    remove semaphore by id\n"
msgstr ""

#: sys-utils/ipcrm.c:58
msgid " -S, --semaphore-key <key>  remove semaphore by key\n"
msgstr ""

#: sys-utils/ipcrm.c:59
msgid " -a, --all[=<shm|msg|sem>]  remove all\n"
msgstr ""

#: sys-utils/ipcrm.c:60
msgid " -v, --verbose              explain what is being done\n"
msgstr ""

#: sys-utils/ipcrm.c:80
#, c-format
msgid "removing shared memory segment id `%d'\n"
msgstr ""

#: sys-utils/ipcrm.c:85
#, c-format
msgid "removing message queue id `%d'\n"
msgstr ""

#: sys-utils/ipcrm.c:90
#, c-format
msgid "removing semaphore id `%d'\n"
msgstr ""

#: sys-utils/ipcrm.c:102 sys-utils/ipcrm.c:216
msgid "permission denied for key"
msgstr ""

#: sys-utils/ipcrm.c:102
msgid "permission denied for id"
msgstr ""

#: sys-utils/ipcrm.c:105 sys-utils/ipcrm.c:222
msgid "invalid key"
msgstr ""

#: sys-utils/ipcrm.c:105
msgid "invalid id"
msgstr ""

#: sys-utils/ipcrm.c:108 sys-utils/ipcrm.c:219
msgid "already removed key"
msgstr ""

#: sys-utils/ipcrm.c:108
msgid "already removed id"
msgstr ""

#: sys-utils/ipcrm.c:111 sys-utils/ipcrm.c:225
#, fuzzy
msgid "key failed"
msgstr "查找失败"

#: sys-utils/ipcrm.c:111
#, fuzzy
msgid "id failed"
msgstr "查找失败"

#: sys-utils/ipcrm.c:128
#, fuzzy, c-format
msgid "invalid id: %s"
msgstr "查找失败"

#: sys-utils/ipcrm.c:154 term-utils/agetty.c:685 term-utils/agetty.c:694
#, fuzzy
msgid "not enough arguments"
msgstr "%s 需要一个参数\n"

#: sys-utils/ipcrm.c:161
#, c-format
msgid "resource(s) deleted\n"
msgstr ""

#: sys-utils/ipcrm.c:194
#, c-format
msgid "illegal key (%s)"
msgstr ""

#: sys-utils/ipcrm.c:252
msgid "kernel not configured for shared memory"
msgstr ""

#: sys-utils/ipcrm.c:265
msgid "kernel not configured for semaphores"
msgstr ""

#: sys-utils/ipcrm.c:279
msgid "kernel not configured for message queues"
msgstr ""

#: sys-utils/ipcrm.c:381 sys-utils/ipcrm.c:405
#, fuzzy, c-format
msgid "unknown argument: %s"
msgstr "%s: 未知命令: %s\n"

#: sys-utils/ipcs.c:122
msgid " -i, --id <id>  print details on resource identified by id\n"
msgstr ""

#: sys-utils/ipcs.c:126
#, fuzzy
msgid "Resource options:\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/ipcs.c:127
msgid " -m, --shmems      shared memory segments\n"
msgstr ""

#: sys-utils/ipcs.c:128
msgid " -q, --queues      message queues\n"
msgstr ""

#: sys-utils/ipcs.c:129
msgid " -s, --semaphores  semaphores\n"
msgstr ""

#: sys-utils/ipcs.c:130
msgid " -a, --all         all (default)\n"
msgstr ""

#: sys-utils/ipcs.c:132
msgid "Output format:\n"
msgstr ""

#: sys-utils/ipcs.c:133
msgid " -t, --time        show attach, detach and change times\n"
msgstr ""

#: sys-utils/ipcs.c:134
msgid " -p, --pid         show creator and last operations PIDs\n"
msgstr ""

#: sys-utils/ipcs.c:135
msgid " -c, --creator     show creator and owner\n"
msgstr ""

#: sys-utils/ipcs.c:136
msgid " -l, --limits      show resource limits\n"
msgstr ""

#: sys-utils/ipcs.c:137
msgid " -u, --summary     show status summary\n"
msgstr ""

#: sys-utils/ipcs.c:278
#, c-format
msgid "kernel not configured for shared memory\n"
msgstr ""

#: sys-utils/ipcs.c:284
#, c-format
msgid "------ Shared Memory Limits --------\n"
msgstr ""

#: sys-utils/ipcs.c:291
#, c-format
msgid "max number of segments = %lu\n"
msgstr ""

#: sys-utils/ipcs.c:293
#, c-format
msgid "max seg size (kbytes) = %lu\n"
msgstr ""

#: sys-utils/ipcs.c:295
#, c-format
msgid "max total shared memory (kbytes) = %llu\n"
msgstr ""

#: sys-utils/ipcs.c:297
#, c-format
msgid "min seg size (bytes) = %lu\n"
msgstr ""

#: sys-utils/ipcs.c:302
#, c-format
msgid "------ Shared Memory Status --------\n"
msgstr ""

#: sys-utils/ipcs.c:314
#, c-format
msgid ""
"segments allocated %d\n"
"pages allocated %ld\n"
"pages resident  %ld\n"
"pages swapped   %ld\n"
"Swap performance: %ld attempts\t %ld successes\n"
msgstr ""

#: sys-utils/ipcs.c:327
#, c-format
msgid "------ Shared Memory Segment Creators/Owners --------\n"
msgstr ""

#: sys-utils/ipcs.c:329 sys-utils/ipcs.c:335 sys-utils/ipcs.c:342
#: sys-utils/ipcs.c:348
msgid "shmid"
msgstr ""

#: sys-utils/ipcs.c:329 sys-utils/ipcs.c:348 sys-utils/ipcs.c:448
#: sys-utils/ipcs.c:463 sys-utils/ipcs.c:545 sys-utils/ipcs.c:563
msgid "perms"
msgstr ""

#: sys-utils/ipcs.c:329 sys-utils/ipcs.c:448 sys-utils/ipcs.c:545
msgid "cuid"
msgstr ""

#: sys-utils/ipcs.c:329 sys-utils/ipcs.c:448 sys-utils/ipcs.c:545
msgid "cgid"
msgstr ""

#: sys-utils/ipcs.c:329 sys-utils/ipcs.c:448 sys-utils/ipcs.c:545
msgid "uid"
msgstr ""

#: sys-utils/ipcs.c:329 sys-utils/ipcs.c:448 sys-utils/ipcs.c:545
msgid "gid"
msgstr ""

#: sys-utils/ipcs.c:333
#, c-format
msgid "------ Shared Memory Attach/Detach/Change Times --------\n"
msgstr ""

#: sys-utils/ipcs.c:335 sys-utils/ipcs.c:342 sys-utils/ipcs.c:348
#: sys-utils/ipcs.c:454 sys-utils/ipcs.c:463 sys-utils/ipcs.c:551
#: sys-utils/ipcs.c:557 sys-utils/ipcs.c:563
msgid "owner"
msgstr ""

#: sys-utils/ipcs.c:335
msgid "attached"
msgstr ""

#: sys-utils/ipcs.c:335
msgid "detached"
msgstr ""

#: sys-utils/ipcs.c:336
msgid "changed"
msgstr ""

#: sys-utils/ipcs.c:340
#, c-format
msgid "------ Shared Memory Creator/Last-op PIDs --------\n"
msgstr ""

#: sys-utils/ipcs.c:342
msgid "cpid"
msgstr ""

#: sys-utils/ipcs.c:342
msgid "lpid"
msgstr ""

#: sys-utils/ipcs.c:346
#, c-format
msgid "------ Shared Memory Segments --------\n"
msgstr ""

#: sys-utils/ipcs.c:348 sys-utils/ipcs.c:463 sys-utils/ipcs.c:563
msgid "key"
msgstr ""

#: sys-utils/ipcs.c:348 sys-utils/prlimit.c:71 sys-utils/prlimit.c:74
#: sys-utils/prlimit.c:77 sys-utils/prlimit.c:78 sys-utils/prlimit.c:86
msgid "bytes"
msgstr ""

#: sys-utils/ipcs.c:349
msgid "nattch"
msgstr ""

#: sys-utils/ipcs.c:349
msgid "status"
msgstr ""

#: sys-utils/ipcs.c:370 sys-utils/ipcs.c:372 sys-utils/ipcs.c:374
#: sys-utils/ipcs.c:484 sys-utils/ipcs.c:486 sys-utils/ipcs.c:584
#: sys-utils/ipcs.c:586 sys-utils/ipcs.c:588 sys-utils/ipcs.c:638
#: sys-utils/ipcs.c:640 sys-utils/ipcs.c:667 sys-utils/ipcs.c:669
#: sys-utils/ipcs.c:671 sys-utils/ipcs.c:694
msgid "Not set"
msgstr ""

#: sys-utils/ipcs.c:402
msgid "dest"
msgstr ""

#: sys-utils/ipcs.c:403
msgid "locked"
msgstr ""

#: sys-utils/ipcs.c:422
#, c-format
msgid "kernel not configured for semaphores\n"
msgstr ""

#: sys-utils/ipcs.c:428
#, c-format
msgid "------ Semaphore Limits --------\n"
msgstr ""

#: sys-utils/ipcs.c:432
#, c-format
msgid "max number of arrays = %d\n"
msgstr ""

#: sys-utils/ipcs.c:433
#, c-format
msgid "max semaphores per array = %d\n"
msgstr ""

#: sys-utils/ipcs.c:434
#, c-format
msgid "max semaphores system wide = %d\n"
msgstr ""

#: sys-utils/ipcs.c:435
#, c-format
msgid "max ops per semop call = %d\n"
msgstr ""

#: sys-utils/ipcs.c:436
#, c-format
msgid "semaphore max value = %d\n"
msgstr ""

#: sys-utils/ipcs.c:440
#, c-format
msgid "------ Semaphore Status --------\n"
msgstr ""

#: sys-utils/ipcs.c:441
#, c-format
msgid "used arrays = %d\n"
msgstr ""

#: sys-utils/ipcs.c:442
#, c-format
msgid "allocated semaphores = %d\n"
msgstr ""

#: sys-utils/ipcs.c:446
#, c-format
msgid "------ Semaphore Arrays Creators/Owners --------\n"
msgstr ""

#: sys-utils/ipcs.c:448 sys-utils/ipcs.c:454 sys-utils/ipcs.c:463
msgid "semid"
msgstr ""

#: sys-utils/ipcs.c:452
#, c-format
msgid "------ Semaphore Operation/Change Times --------\n"
msgstr ""

#: sys-utils/ipcs.c:454
msgid "last-op"
msgstr ""

#: sys-utils/ipcs.c:454
msgid "last-changed"
msgstr ""

#: sys-utils/ipcs.c:461
#, c-format
msgid "------ Semaphore Arrays --------\n"
msgstr ""

#: sys-utils/ipcs.c:463
msgid "nsems"
msgstr ""

#: sys-utils/ipcs.c:521
#, c-format
msgid "kernel not configured for message queues\n"
msgstr ""

#: sys-utils/ipcs.c:529
#, c-format
msgid "------ Messages Limits --------\n"
msgstr ""

#: sys-utils/ipcs.c:530
#, c-format
msgid "max queues system wide = %d\n"
msgstr ""

#: sys-utils/ipcs.c:531
#, c-format
msgid "max size of message (bytes) = %d\n"
msgstr ""

#: sys-utils/ipcs.c:532
#, c-format
msgid "default max size of queue (bytes) = %d\n"
msgstr ""

#: sys-utils/ipcs.c:536
#, c-format
msgid "------ Messages Status --------\n"
msgstr ""

#: sys-utils/ipcs.c:537
#, c-format
msgid "allocated queues = %d\n"
msgstr ""

#: sys-utils/ipcs.c:538
#, c-format
msgid "used headers = %d\n"
msgstr ""

#: sys-utils/ipcs.c:539
#, c-format
msgid "used space = %d bytes\n"
msgstr ""

#: sys-utils/ipcs.c:543
#, c-format
msgid "------ Message Queues Creators/Owners --------\n"
msgstr ""

#: sys-utils/ipcs.c:545 sys-utils/ipcs.c:551 sys-utils/ipcs.c:557
#: sys-utils/ipcs.c:563
msgid "msqid"
msgstr ""

#: sys-utils/ipcs.c:549
#, c-format
msgid "------ Message Queues Send/Recv/Change Times --------\n"
msgstr ""

#: sys-utils/ipcs.c:551
msgid "send"
msgstr ""

#: sys-utils/ipcs.c:551
msgid "recv"
msgstr ""

#: sys-utils/ipcs.c:551
msgid "change"
msgstr ""

#: sys-utils/ipcs.c:555
#, c-format
msgid "------ Message Queues PIDs --------\n"
msgstr ""

#: sys-utils/ipcs.c:557
msgid "lspid"
msgstr ""

#: sys-utils/ipcs.c:557
msgid "lrpid"
msgstr ""

#: sys-utils/ipcs.c:561
#, c-format
msgid "------ Message Queues --------\n"
msgstr ""

#: sys-utils/ipcs.c:564
msgid "used-bytes"
msgstr ""

#: sys-utils/ipcs.c:564
msgid "messages"
msgstr ""

#: sys-utils/ipcs.c:627
#, fuzzy
msgid "shmctl failed"
msgstr "%s 失败.\n"

#: sys-utils/ipcs.c:629
#, c-format
msgid ""
"\n"
"Shared memory Segment shmid=%d\n"
msgstr ""

#: sys-utils/ipcs.c:630
#, c-format
msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\n"
msgstr ""

#: sys-utils/ipcs.c:632
#, c-format
msgid "mode=%#o\taccess_perms=%#o\n"
msgstr ""

#: sys-utils/ipcs.c:634
#, c-format
msgid "bytes=%lu\tlpid=%d\tcpid=%d\tnattch=%ld\n"
msgstr ""

#: sys-utils/ipcs.c:637
#, c-format
msgid "att_time=%-26.24s\n"
msgstr ""

#: sys-utils/ipcs.c:639
#, c-format
msgid "det_time=%-26.24s\n"
msgstr ""

#: sys-utils/ipcs.c:641 sys-utils/ipcs.c:670
#, c-format
msgid "change_time=%-26.24s\n"
msgstr ""

#: sys-utils/ipcs.c:653
#, fuzzy
msgid "msgctl failed"
msgstr "%s 失败.\n"

#: sys-utils/ipcs.c:655
#, c-format
msgid ""
"\n"
"Message Queue msqid=%d\n"
msgstr ""

#: sys-utils/ipcs.c:656
#, c-format
msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\tmode=%#o\n"
msgstr ""

#: sys-utils/ipcs.c:658
#, c-format
msgid "cbytes=%ld\tqbytes=%ld\tqnum=%ld\tlspid=%d\tlrpid=%d\n"
msgstr ""

#: sys-utils/ipcs.c:666
#, c-format
msgid "send_time=%-26.24s\n"
msgstr ""

#: sys-utils/ipcs.c:668
#, c-format
msgid "rcv_time=%-26.24s\n"
msgstr ""

#: sys-utils/ipcs.c:685 sys-utils/ipcs.c:707
#, fuzzy
msgid "semctl failed"
msgstr "查找失败"

#: sys-utils/ipcs.c:687
#, c-format
msgid ""
"\n"
"Semaphore Array semid=%d\n"
msgstr ""

#: sys-utils/ipcs.c:688
#, c-format
msgid "uid=%u\t gid=%u\t cuid=%u\t cgid=%u\n"
msgstr ""

#: sys-utils/ipcs.c:690
#, c-format
msgid "mode=%#o, access_perms=%#o\n"
msgstr ""

#: sys-utils/ipcs.c:692
#, c-format
msgid "nsems = %ld\n"
msgstr ""

#: sys-utils/ipcs.c:693
#, c-format
msgid "otime = %-26.24s\n"
msgstr ""

#: sys-utils/ipcs.c:695
#, c-format
msgid "ctime = %-26.24s\n"
msgstr ""

#: sys-utils/ipcs.c:698
msgid "semnum"
msgstr ""

#: sys-utils/ipcs.c:698
msgid "value"
msgstr ""

#: sys-utils/ipcs.c:698
msgid "ncount"
msgstr ""

#: sys-utils/ipcs.c:698
msgid "zcount"
msgstr ""

#: sys-utils/ipcs.c:698
msgid "pid"
msgstr ""

#: sys-utils/ldattach.c:144
msgid "invalid iflag"
msgstr ""

#: sys-utils/ldattach.c:160
#, fuzzy, c-format
msgid " %s [options] <ldisc> <device>\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/ldattach.c:163
msgid " -d, --debug             print verbose messages to stderr\n"
msgstr ""

#: sys-utils/ldattach.c:164
msgid " -s, --speed <value>     set serial line speed\n"
msgstr ""

#: sys-utils/ldattach.c:165
msgid " -7, --sevenbits         set character size to 7 bits\n"
msgstr ""

#: sys-utils/ldattach.c:166
msgid " -8, --eightbits         set character size to 8 bits\n"
msgstr ""

#: sys-utils/ldattach.c:167
msgid " -n, --noparity          set parity to none\n"
msgstr ""

#: sys-utils/ldattach.c:168
msgid " -e, --evenparity        set parity to even\n"
msgstr ""

#: sys-utils/ldattach.c:169
msgid " -o, --oddparity         set parity to odd\n"
msgstr ""

#: sys-utils/ldattach.c:170
msgid " -1, --onestopbit        set stop bits to one\n"
msgstr ""

#: sys-utils/ldattach.c:171
msgid " -2, --twostopbits       set stop bits to two\n"
msgstr ""

#: sys-utils/ldattach.c:172
msgid " -i, --iflag [-]<iflag>  set input mode flag\n"
msgstr ""

#: sys-utils/ldattach.c:177
msgid ""
"\n"
"Known <ldisc> names:\n"
msgstr ""

#: sys-utils/ldattach.c:179
msgid ""
"\n"
"Known <iflag> names:\n"
msgstr ""

#: sys-utils/ldattach.c:266
#, fuzzy
msgid "invalid speed argument"
msgstr "不能读 inodes"

#: sys-utils/ldattach.c:277
msgid "invalid option"
msgstr ""

#: sys-utils/ldattach.c:288
msgid "invalid line discipline argument"
msgstr ""

#: sys-utils/ldattach.c:295
#, c-format
msgid "%s is not a serial line"
msgstr ""

#: sys-utils/ldattach.c:302
#, c-format
msgid "cannot get terminal attributes for %s"
msgstr ""

#: sys-utils/ldattach.c:305
#, c-format
msgid "speed %d unsupported"
msgstr ""

#: sys-utils/ldattach.c:354
#, c-format
msgid "cannot set terminal attributes for %s"
msgstr ""

#: sys-utils/ldattach.c:361
msgid "cannot set line discipline"
msgstr ""

#: sys-utils/ldattach.c:367
msgid "cannot daemonize"
msgstr ""

#: sys-utils/losetup.c:64 sys-utils/losetup.c:76
#, c-format
msgid ", offset %ju"
msgstr ""

#: sys-utils/losetup.c:67 sys-utils/losetup.c:79
#, c-format
msgid ", sizelimit %ju"
msgstr ""

#: sys-utils/losetup.c:87
#, c-format
msgid ", encryption %s (type %u)"
msgstr ""

#: sys-utils/losetup.c:122
#, fuzzy, c-format
msgid "%s: set capacity failed"
msgstr "%s 失败.\n"

#: sys-utils/losetup.c:132
#, fuzzy, c-format
msgid "%s: detach failed"
msgstr "%s 失败.\n"

#: sys-utils/losetup.c:158
#, c-format
msgid ""
" %1$s [options] [<loopdev>]\n"
" %1$s [options] -f | <loopdev> <file>\n"
msgstr ""

#: sys-utils/losetup.c:163
msgid ""
" -a, --all                     list all used devices\n"
" -d, --detach <loopdev> [...]  detach one or more devices\n"
" -D, --detach-all              detach all used devices\n"
" -f, --find                    find first unused device\n"
" -c, --set-capacity <loopdev>  resize device\n"
" -j, --associated <file>       list all devices associated with <file>\n"
msgstr ""

#: sys-utils/losetup.c:171
msgid ""
" -e, --encryption <type>       enable encryption with specified <name/num>\n"
" -o, --offset <num>            start at offset <num> into file\n"
"     --sizelimit <num>         device limited to <num> bytes of the file\n"
" -p, --pass-fd <num>           read passphrase from file descriptor <num>\n"
" -P, --partscan                create partitioned loop device\n"
" -r, --read-only               setup read-only loop device\n"
"     --show                    print device name after setup (with -f)\n"
" -v, --verbose                 verbose mode\n"
msgstr ""

#: sys-utils/losetup.c:200
#, c-format
msgid ""
"%s: warning: file smaller than 512 bytes, the loop device maybe be useless "
"or invisible for system tools."
msgstr ""

#: sys-utils/losetup.c:204
#, c-format
msgid ""
"%s: warning: file does not fit into a 512-byte sector the end of the file "
"will be ignored."
msgstr ""

#: sys-utils/losetup.c:273 sys-utils/losetup.c:283 sys-utils/losetup.c:351
#: sys-utils/losetup.c:441
#, fuzzy, c-format
msgid "%s: failed to use device"
msgstr "%s:不是一个块设备\n"

#: sys-utils/losetup.c:312 sys-utils/mount.c:803
msgid "invalid passphrase file descriptor"
msgstr ""

#: sys-utils/losetup.c:362
msgid "no loop device specified"
msgstr ""

#: sys-utils/losetup.c:364
#, fuzzy, c-format
msgid "%s failed to use device"
msgstr "%s:不是一个块设备\n"

#: sys-utils/losetup.c:369
msgid "no file specified"
msgstr ""

#: sys-utils/losetup.c:376
#, c-format
msgid "the options %s are allowed to loop device setup only"
msgstr ""

#: sys-utils/losetup.c:381
msgid "the option --offset is not allowed in this context."
msgstr ""

#: sys-utils/losetup.c:392 sys-utils/mount.c:118
msgid "couldn't lock into memory"
msgstr ""

#: sys-utils/losetup.c:401
msgid "not found unused device"
msgstr ""

#: sys-utils/losetup.c:413
#, fuzzy, c-format
msgid "%s: failed to use backing file"
msgstr "重新读取分区表"

#: sys-utils/losetup.c:452
#, fuzzy
msgid "find unused loop device failed"
msgstr "查找失败"

#: sys-utils/losetup.c:462 sys-utils/umount.c:227
#, c-format
msgid "%s"
msgstr ""

#: sys-utils/lscpu.c:65
#, fuzzy
msgid "none"
msgstr "完成\n"

#: sys-utils/lscpu.c:66
msgid "para"
msgstr ""

#: sys-utils/lscpu.c:67
msgid "full"
msgstr ""

#: sys-utils/lscpu.c:110
msgid "horizontal"
msgstr ""

#: sys-utils/lscpu.c:111
msgid "vertical"
msgstr ""

#: sys-utils/lscpu.c:237
msgid "logical CPU number"
msgstr ""

#: sys-utils/lscpu.c:238
#, fuzzy
msgid "logical core number"
msgstr "获得段大小"

#: sys-utils/lscpu.c:239
#, fuzzy
msgid "logical socket number"
msgstr "获得段大小"

#: sys-utils/lscpu.c:240
msgid "logical NUMA node number"
msgstr ""

#: sys-utils/lscpu.c:241
msgid "logical book number"
msgstr ""

#: sys-utils/lscpu.c:242
msgid "shows how caches are shared between CPUs"
msgstr ""

#: sys-utils/lscpu.c:243
msgid "CPU dispatching mode on virtual hardware"
msgstr ""

#: sys-utils/lscpu.c:244
msgid "physical address of a CPU"
msgstr ""

#: sys-utils/lscpu.c:245
msgid "shows if the hypervisor has allocated the CPU"
msgstr ""

#: sys-utils/lscpu.c:246
msgid "shows if Linux currently makes use of the CPU"
msgstr ""

#: sys-utils/lscpu.c:338
#, fuzzy
msgid "error: uname failed"
msgstr "查找失败"

#: sys-utils/lscpu.c:549
#, fuzzy
msgid "failed to allocate memory"
msgstr "不能为 inodes 分配缓冲区"

#: sys-utils/lscpu.c:861 sys-utils/lscpu.c:871
#, c-format
msgid "Y"
msgstr ""

#: sys-utils/lscpu.c:861 sys-utils/lscpu.c:871
#, c-format
msgid "N"
msgstr ""

#: sys-utils/lscpu.c:945
#, c-format
msgid ""
"# The following is the parsable format, which can be fed to other\n"
"# programs. Each different item in every column has an unique ID\n"
"# starting from zero.\n"
msgstr ""

#: sys-utils/lscpu.c:1079
msgid "Architecture:"
msgstr ""

#: sys-utils/lscpu.c:1093
msgid "CPU op-mode(s):"
msgstr ""

#: sys-utils/lscpu.c:1096 sys-utils/lscpu.c:1098
msgid "Byte Order:"
msgstr ""

#: sys-utils/lscpu.c:1100
msgid "CPU(s):"
msgstr ""

#: sys-utils/lscpu.c:1103
msgid "On-line CPU(s) mask:"
msgstr ""

#: sys-utils/lscpu.c:1104
msgid "On-line CPU(s) list:"
msgstr ""

#: sys-utils/lscpu.c:1122
msgid "Off-line CPU(s) mask:"
msgstr ""

#: sys-utils/lscpu.c:1123
msgid "Off-line CPU(s) list:"
msgstr ""

#: sys-utils/lscpu.c:1154
msgid "Thread(s) per core:"
msgstr ""

#: sys-utils/lscpu.c:1155
msgid "Core(s) per socket:"
msgstr ""

#: sys-utils/lscpu.c:1158
msgid "Socket(s) per book:"
msgstr ""

#: sys-utils/lscpu.c:1160
msgid "Book(s):"
msgstr ""

#: sys-utils/lscpu.c:1162
msgid "Socket(s):"
msgstr ""

#: sys-utils/lscpu.c:1166
msgid "NUMA node(s):"
msgstr ""

#: sys-utils/lscpu.c:1168
msgid "Vendor ID:"
msgstr ""

#: sys-utils/lscpu.c:1170
msgid "CPU family:"
msgstr ""

#: sys-utils/lscpu.c:1172
msgid "Model:"
msgstr ""

#: sys-utils/lscpu.c:1174
msgid "Stepping:"
msgstr ""

#: sys-utils/lscpu.c:1176
msgid "CPU MHz:"
msgstr ""

#: sys-utils/lscpu.c:1178
msgid "BogoMIPS:"
msgstr ""

#: sys-utils/lscpu.c:1181 sys-utils/lscpu.c:1183
msgid "Virtualization:"
msgstr ""

#: sys-utils/lscpu.c:1186
msgid "Hypervisor:"
msgstr ""

#: sys-utils/lscpu.c:1188
msgid "Hypervisor vendor:"
msgstr ""

#: sys-utils/lscpu.c:1189
msgid "Virtualization type:"
msgstr ""

#: sys-utils/lscpu.c:1192
msgid "Dispatching mode:"
msgstr ""

#: sys-utils/lscpu.c:1199
#, c-format
msgid "%s cache:"
msgstr ""

#: sys-utils/lscpu.c:1205
#, c-format
msgid "NUMA node%d CPU(s):"
msgstr ""

#: sys-utils/lscpu.c:1219
msgid ""
" -a, --all               print online and offline CPUs (default for -e)\n"
" -b, --online            print online CPUs only (default for -p)\n"
" -c, --offline           print offline CPUs only\n"
" -e, --extended[=<list>] print out an extended readable format\n"
" -h, --help              print this help\n"
" -p, --parse[=<list>]    print out a parsable format\n"
" -s, --sysroot <dir>     use directory DIR as system root\n"
" -V, --version           print version information and exit\n"
" -x, --hex               print hexadecimal masks rather than lists of CPUs\n"
msgstr ""

#: sys-utils/lscpu.c:1234
#, c-format
msgid ""
"\n"
"For more details see lscpu(1).\n"
msgstr ""

#: sys-utils/mount.c:70 sys-utils/umount.c:112
#, c-format
msgid "only root can use \"--%s\" option (effective UID is %u)"
msgstr ""

#: sys-utils/mount.c:73 sys-utils/umount.c:115
#, c-format
msgid "only root can do that (effective UID is %u)"
msgstr ""

#: sys-utils/mount.c:77 sys-utils/umount.c:119
#, c-format
msgid "only root can use \"--%s\" option"
msgstr ""

#: sys-utils/mount.c:78 sys-utils/umount.c:120
msgid "only root can do that"
msgstr ""

#: sys-utils/mount.c:89 sys-utils/umount.c:57
#, c-format
msgid "%s from %s (libmount %s"
msgstr ""

#: sys-utils/mount.c:106 sys-utils/umount.c:43
#, fuzzy, c-format
msgid "%s: parse error: ignore entry at line %d."
msgstr "%s: %s ioctl 错误\n"

#: sys-utils/mount.c:145
#, fuzzy
msgid "failed to read mtab"
msgstr "不能读 inodes"

#: sys-utils/mount.c:205 sys-utils/umount.c:251
#, c-format
msgid "%-25s: ignored\n"
msgstr ""

#: sys-utils/mount.c:206
#, fuzzy, c-format
msgid "%-25s: already mounted\n"
msgstr "%s 已经挂载.\t"

#: sys-utils/mount.c:352
#, c-format
msgid "only root can mount %s on %s"
msgstr ""

#: sys-utils/mount.c:355
#, fuzzy, c-format
msgid "%s is already mounted"
msgstr "%s 已经挂载.\t"

#: sys-utils/mount.c:358
#, fuzzy, c-format
msgid "can't find %s in %s"
msgstr "%s 失败.\n"

#: sys-utils/mount.c:363
msgid "I could not determine the filesystem type, and none was specified"
msgstr ""

#: sys-utils/mount.c:366
msgid "you must specify the filesystem type"
msgstr ""

#: sys-utils/mount.c:370
#, fuzzy, c-format
msgid "can't find %s"
msgstr "%s 失败.\n"

#: sys-utils/mount.c:372
#, fuzzy
msgid "mount source not defined"
msgstr "%s 失败.\n"

#: sys-utils/mount.c:376 sys-utils/mount.c:378
#, fuzzy
msgid "failed to parse mount options"
msgstr "不能读 inodes"

#: sys-utils/mount.c:384
#, fuzzy, c-format
msgid "%s: failed to setup loop device (probably unknown encryption type)"
msgstr "%s:不是一个块设备\n"

#: sys-utils/mount.c:390
#, fuzzy, c-format
msgid "%s: mount failed"
msgstr "%s 失败.\n"

#: sys-utils/mount.c:400
#, c-format
msgid "%s: filesystem mounted, but mount(8) failed"
msgstr ""

#: sys-utils/mount.c:417 sys-utils/mount.c:469
#, fuzzy, c-format
msgid "mount point %s is not a directory"
msgstr "根 inode 不是一个目录"

#: sys-utils/mount.c:421
msgid "must be superuser to use mount"
msgstr ""

#: sys-utils/mount.c:429
#, c-format
msgid "%s is busy"
msgstr ""

#: sys-utils/mount.c:433
#, fuzzy, c-format
msgid "%s is already mounted or %s busy"
msgstr "%s 已经挂载.\t"

#: sys-utils/mount.c:445
#, fuzzy, c-format
msgid "       %s is already mounted on %s\n"
msgstr "%s 已经挂载.\t"

#: sys-utils/mount.c:453
#, c-format
msgid "mount point %s does not exist"
msgstr ""

#: sys-utils/mount.c:455
#, c-format
msgid "mount point %s is a symbolic link to nowhere"
msgstr ""

#: sys-utils/mount.c:460
#, c-format
msgid "special device %s does not exist"
msgstr ""

#: sys-utils/mount.c:463 sys-utils/mount.c:478
#, fuzzy
msgid "mount(2) failed"
msgstr "查找失败"

#: sys-utils/mount.c:474
#, c-format
msgid "special device %s does not exist (a path prefix is not a directory)"
msgstr ""

#: sys-utils/mount.c:484
#, c-format
msgid "%s not mounted or bad option"
msgstr ""

#: sys-utils/mount.c:486
#, fuzzy, c-format
msgid "%s is not mountpoint or bad option"
msgstr "根 inode 不是一个目录"

#: sys-utils/mount.c:488
#, c-format
msgid ""
"wrong fs type, bad option, bad superblock on %s,\n"
"       missing codepage or helper program, or other error"
msgstr ""

#: sys-utils/mount.c:494
#, c-format
msgid ""
"       (for several filesystems (e.g. nfs, cifs) you might\n"
"       need a /sbin/mount.<type> helper program)\n"
msgstr ""

#: sys-utils/mount.c:498
#, c-format
msgid ""
"       In some cases useful info is found in syslog - try\n"
"       dmesg | tail or so\n"
msgstr ""

#: sys-utils/mount.c:507
#, fuzzy, c-format
msgid "%s: can't read superblock"
msgstr "不能写超级块"

#: sys-utils/mount.c:511
#, fuzzy, c-format
msgid "unknown filesystem type '%s'"
msgstr "%s: 未知命令: %s\n"

#: sys-utils/mount.c:519
#, fuzzy, c-format
msgid "%s is not a block device, and stat(2) fails?"
msgstr "%s:不是一个块设备\n"

#: sys-utils/mount.c:521
#, c-format
msgid ""
"the kernel does not recognize %s as a block device\n"
"       (maybe `modprobe driver'?)"
msgstr ""

#: sys-utils/mount.c:524
#, fuzzy, c-format
msgid "%s is not a block device (maybe try `-o loop'?)"
msgstr "%s:不是一个块设备\n"

#: sys-utils/mount.c:526
#, fuzzy, c-format
msgid " %s is not a block device"
msgstr "%s:不是一个块设备\n"

#: sys-utils/mount.c:533
#, fuzzy, c-format
msgid "%s is not a valid block device"
msgstr "%s:不是一个块设备\n"

#: sys-utils/mount.c:539
#, c-format
msgid "cannot mount %s read-only"
msgstr ""

#: sys-utils/mount.c:542
#, c-format
msgid "%s is write-protected but explicit `-w' flag given"
msgstr ""

#: sys-utils/mount.c:545
#, c-format
msgid "cannot remount %s read-write, is write-protected"
msgstr ""

#: sys-utils/mount.c:548
#, c-format
msgid "%s is write-protected, mounting read-only"
msgstr ""

#: sys-utils/mount.c:561
#, c-format
msgid "no medium found on %s"
msgstr ""

#: sys-utils/mount.c:565
#, fuzzy, c-format
msgid "mount %s on %s failed"
msgstr "%s 失败.\n"

#: sys-utils/mount.c:587
#, fuzzy, c-format
msgid "%s: failed to parse"
msgstr "不能读 inodes"

#: sys-utils/mount.c:596
#, c-format
msgid ""
" %1$s [-lhV]\n"
" %1$s -a [options]\n"
" %1$s [options] <source> | <directory>\n"
" %1$s [options] <source> <directory>\n"
" %1$s <operation> <mountpoint> [<target>]\n"
msgstr ""

#: sys-utils/mount.c:605
#, c-format
msgid ""
" -a, --all               mount all filesystems mentioned in fstab\n"
" -c, --no-canonicalize   don't canonicalize paths\n"
" -f, --fake              dry run; skip the mount(2) syscall\n"
" -F, --fork              fork off for each device (use with -a)\n"
" -T, --fstab <path>      alternative file to /etc/fstab\n"
msgstr ""

#: sys-utils/mount.c:611
#, c-format
msgid ""
" -h, --help              display this help text and exit\n"
" -i, --internal-only     don't call the mount.<type> helpers\n"
" -l, --show-labels       lists all mounts with LABELs\n"
" -n, --no-mtab           don't write to /etc/mtab\n"
msgstr ""

#: sys-utils/mount.c:616
#, c-format
msgid ""
" -o, --options <list>    comma-separated list of mount options\n"
" -O, --test-opts <list>  limit the set of filesystems (use with -a)\n"
" -p, --pass-fd <num>     read the passphrase from file descriptor\n"
" -r, --read-only         mount the filesystem read-only (same as -o ro)\n"
" -t, --types <list>      limit the set of filesystem types\n"
msgstr ""

#: sys-utils/mount.c:622
#, c-format
msgid ""
" -v, --verbose           say what is being done\n"
" -V, --version           display version information and exit\n"
" -w, --read-write        mount the filesystem read-write (default)\n"
msgstr ""

#: sys-utils/mount.c:631
#, c-format
msgid ""
"\n"
"Source:\n"
" -L, --label <label>     synonym for LABEL=<label>\n"
" -U, --uuid <uuid>       synonym for UUID=<uuid>\n"
" LABEL=<label>           specifies device by filesystem label\n"
" UUID=<uuid>             specifies device by filesystem UUID\n"
" PARTLABEL=<label>       specifies device by partition label\n"
" PARTUUID=<uuid>         specifies device by partition UUID\n"
msgstr ""

#: sys-utils/mount.c:640
#, c-format
msgid ""
" <device>                specifies device by path\n"
" <directory>             mountpoint for bind mounts (see --bind/rbind)\n"
" <file>                  regular file for loopdev setup\n"
msgstr ""

#: sys-utils/mount.c:645
#, c-format
msgid ""
"\n"
"Operations:\n"
" -B, --bind              mount a subtree somewhere else (same as -o bind)\n"
" -M, --move              move a subtree to some other place\n"
" -R, --rbind             mount a subtree and all submounts somewhere else\n"
msgstr ""

#: sys-utils/mount.c:650
#, c-format
msgid ""
" --make-shared           mark a subtree as shared\n"
" --make-slave            mark a subtree as slave\n"
" --make-private          mark a subtree as private\n"
" --make-unbindable       mark a subtree as unbindable\n"
msgstr ""

#: sys-utils/mount.c:655
#, c-format
msgid ""
" --make-rshared          recursively mark a whole subtree as shared\n"
" --make-rslave           recursively mark a whole subtree as slave\n"
" --make-rprivate         recursively mark a whole subtree as private\n"
" --make-runbindable      recursively mark a whole subtree as unbindable\n"
msgstr ""

#: sys-utils/mount.c:744 sys-utils/umount.c:318
msgid "libmount context allocation failed"
msgstr ""

#: sys-utils/mount.c:779 sys-utils/mount.c:790 sys-utils/mount.c:795
#, fuzzy
msgid "failed to append options"
msgstr "不能读 inodes"

#: sys-utils/mount.c:799 sys-utils/umount.c:363
#, fuzzy
msgid "failed to set options pattern"
msgstr "不能读 inodes"

#: sys-utils/mount.c:808
msgid "only one <source> may be specified"
msgstr ""

#: sys-utils/mount.c:811
#, fuzzy
msgid "failed to allocate source buffer"
msgstr "不能为 inodes 分配缓冲区"

#: sys-utils/mountpoint.c:118
#, c-format
msgid ""
" %1$s [-qd] /path/to/directory\n"
" %1$s -x /dev/device\n"
msgstr ""

#: sys-utils/mountpoint.c:122
msgid ""
" -q, --quiet        quiet mode - don't print anything\n"
" -d, --fs-devno     print maj:min device number of the filesystem\n"
" -x, --devno        print maj:min device number of the block device\n"
msgstr ""

#: sys-utils/mountpoint.c:202
#, fuzzy, c-format
msgid "%s is not a mountpoint\n"
msgstr "根 inode 不是一个目录"

#: sys-utils/mountpoint.c:208
#, fuzzy, c-format
msgid "%s is a mountpoint\n"
msgstr "%s 已经挂载.\t"

#: sys-utils/pivot_root.c:33
#, fuzzy, c-format
msgid " %s [options] new_root put_old\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/pivot_root.c:71
#, fuzzy, c-format
msgid "failed to change root from `%s' to `%s'"
msgstr "不能读 inodes"

#: sys-utils/prlimit.c:71
msgid "address space limit"
msgstr ""

#: sys-utils/prlimit.c:72
#, fuzzy
msgid "max core file size"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/prlimit.c:72 sys-utils/prlimit.c:75
#, fuzzy
msgid "blocks"
msgstr "%ld 块\n"

#: sys-utils/prlimit.c:73
msgid "CPU time"
msgstr ""

#: sys-utils/prlimit.c:73
msgid "seconds"
msgstr ""

#: sys-utils/prlimit.c:74
msgid "max data size"
msgstr ""

#: sys-utils/prlimit.c:75
msgid "max file size"
msgstr ""

#: sys-utils/prlimit.c:76
msgid "max number of file locks held"
msgstr ""

#: sys-utils/prlimit.c:77
msgid "max locked-in-memory address space"
msgstr ""

#: sys-utils/prlimit.c:78
msgid "max bytes in POSIX mqueues"
msgstr ""

#: sys-utils/prlimit.c:79
msgid "max nice prio allowed to raise"
msgstr ""

#: sys-utils/prlimit.c:80
#, fuzzy
msgid "max number of open files"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/prlimit.c:81
msgid "max number of processes"
msgstr ""

#: sys-utils/prlimit.c:82
msgid "max resident set size"
msgstr ""

#: sys-utils/prlimit.c:82
msgid "pages"
msgstr ""

#: sys-utils/prlimit.c:83
msgid "max real-time priority"
msgstr ""

#: sys-utils/prlimit.c:84
msgid "timeout for real-time tasks"
msgstr ""

#: sys-utils/prlimit.c:84
msgid "microsecs"
msgstr ""

#: sys-utils/prlimit.c:85
msgid "max number of pending signals"
msgstr ""

#: sys-utils/prlimit.c:86
msgid "max stack size"
msgstr ""

#: sys-utils/prlimit.c:117
#, fuzzy
msgid "resource name"
msgstr "设置只读"

#: sys-utils/prlimit.c:118
#, fuzzy
msgid "resource description"
msgstr "设置只读"

#: sys-utils/prlimit.c:119
msgid "soft limit"
msgstr ""

#: sys-utils/prlimit.c:120
msgid "hard limit (ceiling)"
msgstr ""

#: sys-utils/prlimit.c:121
msgid "units"
msgstr ""

#: sys-utils/prlimit.c:157
#, fuzzy, c-format
msgid " %s [options] [-p PID]\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/prlimit.c:159
#, fuzzy, c-format
msgid " %s [options] COMMAND\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/prlimit.c:161
#, fuzzy
msgid ""
"\n"
"General Options:\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/prlimit.c:162
msgid ""
" -p, --pid <pid>        process id\n"
" -o, --output <list>    define which output columns to use\n"
"     --noheadings       don't print headings\n"
"     --raw              use the raw output format\n"
"     --verbose          verbose output\n"
" -h, --help             display this help and exit\n"
" -V, --version          output version information and exit\n"
msgstr ""

#: sys-utils/prlimit.c:170
#, fuzzy
msgid ""
"\n"
"Resources Options:\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/prlimit.c:171
msgid ""
" -c, --core             maximum size of core files created\n"
" -d, --data             maximum size of a process's data segment\n"
" -e, --nice             maximum nice priority allowed to raise\n"
" -f, --fsize            maximum size of files written by the process\n"
" -i, --sigpending       maximum number of pending signals\n"
" -l, --memlock          maximum size a process may lock into memory\n"
" -m, --rss              maximum resident set size\n"
" -n, --nofile           maximum number of open files\n"
" -q, --msgqueue         maximum bytes in POSIX message queues\n"
" -r, --rtprio           maximum real-time scheduling priority\n"
" -s, --stack            maximum stack size\n"
" -t, --cpu              maximum amount of CPU time in seconds\n"
" -u, --nproc            maximum number of user processes\n"
" -v, --as               size of virtual memory\n"
" -x, --locks            maximum number of file locks\n"
" -y, --rttime           CPU time in microseconds a process scheduled\n"
"                        under real-time scheduling\n"
msgstr ""

#: sys-utils/prlimit.c:321
#, fuzzy, c-format
msgid "failed to get old %s limit"
msgstr "不能读 inodes"

#: sys-utils/prlimit.c:345
#, c-format
msgid "the soft limit %s cannot exceed the hard limit"
msgstr ""

#: sys-utils/prlimit.c:352
#, c-format
msgid "New %s limit: "
msgstr ""

#: sys-utils/prlimit.c:354 sys-utils/prlimit.c:359
msgid "unlimited"
msgstr ""

#: sys-utils/prlimit.c:366
#, fuzzy, c-format
msgid "failed to set the %s resource limit"
msgstr "不能读 inodes"

#: sys-utils/prlimit.c:367
#, fuzzy, c-format
msgid "failed to get the %s resource limit"
msgstr "不能读 inodes"

#: sys-utils/prlimit.c:446
#, fuzzy, c-format
msgid "failed to parse %s limit"
msgstr "不能读 inodes"

#: sys-utils/prlimit.c:588
msgid "--pid and --pid"
msgstr ""

#: sys-utils/prlimit.c:620
msgid "--pid and COMMAND"
msgstr ""

#: sys-utils/readprofile.c:108
#, c-format
msgid " -m, --mapfile <mapfile>   (defaults: \"%s\" and\n"
msgstr ""

#: sys-utils/readprofile.c:110
#, c-format
msgid "                                      \"%s\")\n"
msgstr ""

#: sys-utils/readprofile.c:112
#, c-format
msgid " -p, --profile <pro-file>  (default:  \"%s\")\n"
msgstr ""

#: sys-utils/readprofile.c:113
msgid " -M, --multiplier <mult>   set the profiling multiplier to <mult>\n"
msgstr ""

#: sys-utils/readprofile.c:114
msgid " -i, --info                print only info about the sampling step\n"
msgstr ""

#: sys-utils/readprofile.c:115
msgid " -v, --verbose             print verbose data\n"
msgstr ""

#: sys-utils/readprofile.c:116
msgid " -a, --all                 print all symbols, even if count is 0\n"
msgstr ""

#: sys-utils/readprofile.c:117
msgid " -b, --histbin             print individual histogram-bin counts\n"
msgstr ""

#: sys-utils/readprofile.c:118
msgid " -s, --counters            print individual counters within functions\n"
msgstr ""

#: sys-utils/readprofile.c:119
msgid " -r, --reset               reset all the counters (root only)\n"
msgstr ""

#: sys-utils/readprofile.c:120
msgid " -n, --no-auto             disable byte order auto-detection\n"
msgstr ""

#: sys-utils/readprofile.c:237
#, fuzzy, c-format
msgid "error writing %s"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/readprofile.c:268
msgid "Assuming reversed byte order. Use -n to force native byte order."
msgstr ""

#: sys-utils/readprofile.c:283
#, c-format
msgid "Sampling_step: %i\n"
msgstr ""

#: sys-utils/readprofile.c:299 sys-utils/readprofile.c:320
#, c-format
msgid "%s(%i): wrong map line"
msgstr ""

#: sys-utils/readprofile.c:310
#, c-format
msgid "can't find \"_stext\" in %s"
msgstr ""

#: sys-utils/readprofile.c:343
msgid "profile address out of range. Wrong map file?"
msgstr ""

#: sys-utils/readprofile.c:401
msgid "total"
msgstr ""

#: sys-utils/renice.c:57
#, c-format
msgid ""
" %1$s [-n] <priority> [-p] <pid> [<pid>  ...]\n"
" %1$s [-n] <priority>  -g <pgrp> [<pgrp> ...]\n"
" %1$s [-n] <priority>  -u <user> [<user> ...]\n"
msgstr ""

#: sys-utils/renice.c:63
msgid ""
" -g, --pgrp <id>        interpret as process group ID\n"
" -h, --help             print help\n"
" -n, --priority <num>   set the nice increment value\n"
" -p, --pid <id>         force to be interpreted as process ID\n"
" -u, --user <name|id>   interpret as username or user ID\n"
" -v, --version          print version\n"
msgstr ""

#: sys-utils/renice.c:70
msgid ""
"\n"
"For more information see renice(1).\n"
msgstr ""

#: sys-utils/renice.c:102
#, c-format
msgid "renice from %s\n"
msgstr ""

#: sys-utils/renice.c:139
#, fuzzy, c-format
msgid "unknown user %s"
msgstr "%s: 未知命令: %s\n"

#: sys-utils/renice.c:146
#, c-format
msgid "bad value %s"
msgstr ""

#: sys-utils/renice.c:158
msgid "process ID"
msgstr ""

#: sys-utils/renice.c:161
msgid "user ID"
msgstr ""

#: sys-utils/renice.c:163
msgid "process group ID"
msgstr ""

#: sys-utils/renice.c:168 sys-utils/renice.c:178
#, fuzzy, c-format
msgid "failed to get priority for %d (%s)"
msgstr "不能读 inodes"

#: sys-utils/renice.c:172
#, fuzzy, c-format
msgid "failed to set priority for %d (%s)"
msgstr "不能读 inodes"

#: sys-utils/renice.c:182
#, c-format
msgid "%d (%s) old priority %d, new priority %d\n"
msgstr ""

#: sys-utils/rtcwake.c:92
msgid ""
" -d, --device <device>    select rtc device (rtc0|rtc1|...)\n"
" -n, --dry-run            does everything, but suspend\n"
" -l, --local              RTC uses local timezone\n"
" -m, --mode <mode>        standby|mem|... sleep mode\n"
" -s, --seconds <seconds>  seconds to sleep\n"
" -t, --time <time_t>      time to wake\n"
" -u, --utc                RTC uses UTC\n"
" -v, --verbose            verbose messages\n"
msgstr ""

#: sys-utils/rtcwake.c:156
#, fuzzy
msgid "read rtc time failed"
msgstr "查找失败"

#: sys-utils/rtcwake.c:161
#, fuzzy
msgid "read system time failed"
msgstr "查找失败"

#: sys-utils/rtcwake.c:179
#, fuzzy
msgid "convert rtc time failed"
msgstr "查找失败"

#: sys-utils/rtcwake.c:239
#, fuzzy
msgid "set rtc alarm failed"
msgstr "查找失败"

#: sys-utils/rtcwake.c:243
msgid "enable rtc alarm failed"
msgstr ""

#: sys-utils/rtcwake.c:248
msgid "set rtc wake alarm failed"
msgstr ""

#: sys-utils/rtcwake.c:351
#, fuzzy
msgid "read rtc alarm failed"
msgstr "查找失败"

#: sys-utils/rtcwake.c:357
#, c-format
msgid "alarm: off\n"
msgstr ""

#: sys-utils/rtcwake.c:374
#, fuzzy
msgid "convert time failed"
msgstr "查找失败"

#: sys-utils/rtcwake.c:381
#, c-format
msgid "alarm: on  %s"
msgstr ""

#: sys-utils/rtcwake.c:438
#, c-format
msgid "unrecognized suspend state '%s'"
msgstr ""

#: sys-utils/rtcwake.c:448
#, fuzzy
msgid "invalid seconds argument"
msgstr "%s 需要一个参数\n"

#: sys-utils/rtcwake.c:455
#, fuzzy
msgid "invalid time argument"
msgstr "不能读 inodes"

#: sys-utils/rtcwake.c:479
#, c-format
msgid "%s: assuming RTC uses UTC ...\n"
msgstr ""

#: sys-utils/rtcwake.c:485
#, c-format
msgid "Using UTC time.\n"
msgstr ""

#: sys-utils/rtcwake.c:486
#, c-format
msgid "Using local time.\n"
msgstr ""

#: sys-utils/rtcwake.c:491
msgid "must provide wake time (see -t and -s options)"
msgstr ""

#: sys-utils/rtcwake.c:508
#, fuzzy, c-format
msgid "%s not enabled for wakeup events"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/rtcwake.c:523
#, c-format
msgid "alarm %ld, sys_time %ld, rtc_time %ld, seconds %u\n"
msgstr ""

#: sys-utils/rtcwake.c:529
#, c-format
msgid "suspend to \"%s\" unavailable"
msgstr ""

#: sys-utils/rtcwake.c:537
#, c-format
msgid "time doesn't go backward to %s"
msgstr ""

#: sys-utils/rtcwake.c:547
#, c-format
msgid "%s: wakeup using %s at %s"
msgstr ""

#: sys-utils/rtcwake.c:551
#, c-format
msgid "%s: wakeup from \"%s\" using %s at %s"
msgstr ""

#: sys-utils/rtcwake.c:560
#, c-format
msgid "suspend mode: no; leaving\n"
msgstr ""

#: sys-utils/rtcwake.c:568
#, c-format
msgid "suspend mode: off; executing %s\n"
msgstr ""

#: sys-utils/rtcwake.c:578
#, fuzzy, c-format
msgid "unable to execute %s"
msgstr "不能读 inodes"

#: sys-utils/rtcwake.c:586
#, c-format
msgid "suspend mode: on; reading rtc\n"
msgstr ""

#: sys-utils/rtcwake.c:592
#, fuzzy
msgid "rtc read failed"
msgstr "查找失败"

#: sys-utils/rtcwake.c:603
#, c-format
msgid "suspend mode: disable; disabling alarm\n"
msgstr ""

#: sys-utils/rtcwake.c:607
#, c-format
msgid "suspend mode: show; printing alarm info\n"
msgstr ""

#: sys-utils/rtcwake.c:614
#, c-format
msgid "suspend mode: %s; suspending system\n"
msgstr ""

#: sys-utils/rtcwake.c:620
msgid "disable rtc alarm interrupt failed"
msgstr ""

#: sys-utils/setarch.c:52
#, c-format
msgid "Switching on %s.\n"
msgstr ""

#: sys-utils/setarch.c:94
#, fuzzy, c-format
msgid " %s%s [options] [program [program arguments]]\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/setarch.c:100
#, c-format
msgid ""
" -v, --verbose            says what options are being switched on\n"
" -R, --addr-no-randomize  disables randomization of the virtual address "
"space\n"
" -F, --fdpic-funcptrs     makes function pointers point to descriptors\n"
" -Z, --mmap-page-zero     turns on MMAP_PAGE_ZERO\n"
" -L, --addr-compat-layout changes the way virtual memory is allocated\n"
" -X, --read-implies-exec  turns on READ_IMPLIES_EXEC\n"
" -B, --32bit              turns on ADDR_LIMIT_32BIT\n"
" -I, --short-inode        turns on SHORT_INODE\n"
" -S, --whole-seconds      turns on WHOLE_SECONDS\n"
" -T, --sticky-timeouts    turns on STICKY_TIMEOUTS\n"
" -3, --3gb                limits the used address space to a maximum of 3 "
"GB\n"
"     --4gb                ignored (for backward compatibility only)\n"
"     --uname-2.6          turns on UNAME26\n"
msgstr ""

#: sys-utils/setarch.c:126
#, c-format
msgid ""
"%s\n"
"Try `%s --help' for more information."
msgstr ""

#: sys-utils/setarch.c:128
#, c-format
msgid "Try `%s --help' for more information."
msgstr ""

#: sys-utils/setarch.c:205 sys-utils/setarch.c:220
#, c-format
msgid "%s: Unrecognized architecture"
msgstr ""

#: sys-utils/setarch.c:261 sys-utils/setarch.c:267
msgid "Not enough arguments"
msgstr ""

#: sys-utils/setarch.c:279 sys-utils/setarch.c:340
#, c-format
msgid "Failed to set personality to %s"
msgstr ""

#: sys-utils/setsid.c:28
#, fuzzy, c-format
msgid " %s [options] <program> [arguments ...]\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/setsid.c:32
msgid " -c, --ctty     set the controlling terminal to the current one\n"
msgstr ""

#: sys-utils/setsid.c:79
msgid "fork"
msgstr ""

#: sys-utils/setsid.c:90
#, fuzzy
msgid "setsid failed"
msgstr "查找失败"

#: sys-utils/setsid.c:94
#, fuzzy
msgid "failed to set the controlling terminal"
msgstr "不能读 inodes"

#: sys-utils/setsid.c:97
#, fuzzy
msgid "execvp failed"
msgstr "查找失败"

#: sys-utils/swapoff.c:32
#, c-format
msgid "swapoff %s\n"
msgstr ""

#: sys-utils/swapoff.c:44
msgid "Not superuser."
msgstr ""

#: sys-utils/swapoff.c:47
#, fuzzy, c-format
msgid "%s: swapoff failed"
msgstr "%s 失败.\n"

#: sys-utils/swapoff.c:68 sys-utils/swapon.c:499
#, fuzzy, c-format
msgid " %s [options] [<spec>]\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/swapoff.c:71
msgid ""
" -a, --all              disable all swaps from /proc/swaps\n"
" -v, --verbose          verbose mode\n"
msgstr ""

#: sys-utils/swapoff.c:78
msgid ""
"\n"
"The <spec> parameter:\n"
" -L <label>             LABEL of device to be used\n"
" -U <uuid>              UUID of device to be used\n"
" LABEL=<label>          LABEL of device to be used\n"
" UUID=<uuid>            UUID of device to be used\n"
" <device>               name of device to be used\n"
" <file>                 name of file to be used\n"
msgstr ""

#: sys-utils/swapon.c:91
#, c-format
msgid "%-39s\tType\tSize\tUsed\tPriority\n"
msgstr ""

#: sys-utils/swapon.c:91
msgid "Filename"
msgstr ""

#: sys-utils/swapon.c:115
#, c-format
msgid "%s: reinitializing the swap."
msgstr ""

#: sys-utils/swapon.c:135
#, fuzzy
msgid "execv failed"
msgstr "查找失败"

#: sys-utils/swapon.c:167
#, fuzzy, c-format
msgid "%s: lseek failed"
msgstr "查找失败"

#: sys-utils/swapon.c:173
#, c-format
msgid "%s: write signature failed"
msgstr ""

#: sys-utils/swapon.c:257
#, c-format
msgid "%s: found swap signature: version %d, page-size %d, %s byte order"
msgstr ""

#: sys-utils/swapon.c:262
msgid "different"
msgstr ""

#: sys-utils/swapon.c:262
msgid "same"
msgstr ""

#: sys-utils/swapon.c:308
#, c-format
msgid "%s: insecure permissions %04o, %04o suggested."
msgstr ""

#: sys-utils/swapon.c:313
#, c-format
msgid "%s: insecure file owner %d, 0 (root) suggested."
msgstr ""

#: sys-utils/swapon.c:320
#, c-format
msgid "%s: skipping - it appears to have holes."
msgstr ""

#: sys-utils/swapon.c:334
#, fuzzy, c-format
msgid "%s: get size failed"
msgstr "查找失败"

#: sys-utils/swapon.c:340
#, c-format
msgid "%s: read swap header failed"
msgstr ""

#: sys-utils/swapon.c:350
#, c-format
msgid "%s: pagesize=%d, swapsize=%llu, devsize=%llu"
msgstr ""

#: sys-utils/swapon.c:355
#, c-format
msgid "%s: last_page 0x%08llx is larger than actual size of swapspace"
msgstr ""

#: sys-utils/swapon.c:365
#, c-format
msgid "%s: swap format pagesize does not match."
msgstr ""

#: sys-utils/swapon.c:373
#, c-format
msgid ""
"%s: swap format pagesize does not match. (Use --fixpgsz to reinitialize it.)"
msgstr ""

#: sys-utils/swapon.c:382
#, c-format
msgid "%s: software suspend data detected. Rewriting the swap signature."
msgstr ""

#: sys-utils/swapon.c:407
#, c-format
msgid "swapon %s\n"
msgstr ""

#: sys-utils/swapon.c:432
#, fuzzy, c-format
msgid "%s: swapon failed"
msgstr "%s 失败.\n"

#: sys-utils/swapon.c:459
#, fuzzy, c-format
msgid "failed to parse %s"
msgstr "不能读 inodes"

#: sys-utils/swapon.c:502
msgid ""
" -a, --all              enable all swaps from /etc/fstab\n"
" -d, --discard          discard freed pages before they are reused\n"
" -e, --ifexists         silently skip devices that do not exis\n"
" -f, --fixpgsz          reinitialize the swap space if necessary\n"
" -p, --priority <prio>  specify the priority of the swap device\n"
" -s, --summary          display summary about used swap devices and exit\n"
" -v, --verbose          verbose mode\n"
msgstr ""

#: sys-utils/swapon.c:514
msgid ""
"\n"
"The <spec> parameter:\n"
" -L <label>             synonym for LABEL=<label>\n"
" -U <uuid>              synonym for UUID=<uuid>\n"
" LABEL=<label>          specifies device by swap area label\n"
" UUID=<uuid>            specifies device by swap area UUID\n"
" PARTLABEL=<label>      specifies device by partition label\n"
" PARTUUID=<uuid>        specifies device by partition UUID\n"
" <device>               name of device to be used\n"
" <file>                 name of file to be used\n"
msgstr ""

#: sys-utils/swapon-common.c:62
#, c-format
msgid "cannot find the device for %s"
msgstr ""

#: sys-utils/switch_root.c:57
#, fuzzy
msgid "failed to open directory"
msgstr "不能读 inodes"

#: sys-utils/switch_root.c:65
#, fuzzy
msgid "failed to stat directory"
msgstr "不能读 inodes"

#: sys-utils/switch_root.c:75
#, fuzzy
msgid "failed to read directory"
msgstr "根 inode 不是一个目录"

#: sys-utils/switch_root.c:88
#, fuzzy, c-format
msgid "failed to stat %s"
msgstr "不能读 inodes"

#: sys-utils/switch_root.c:107
#, fuzzy, c-format
msgid "failed to unlink %s"
msgstr "不能读 inodes"

#: sys-utils/switch_root.c:128
#, fuzzy, c-format
msgid "failed to stat directory %s"
msgstr "根 inode 不是一个目录"

#: sys-utils/switch_root.c:144
#, fuzzy, c-format
msgid "failed to mount moving %s to %s"
msgstr "不能读 inodes"

#: sys-utils/switch_root.c:146
#, c-format
msgid "forcing unmount of %s"
msgstr ""

#: sys-utils/switch_root.c:152
#, fuzzy, c-format
msgid "failed to change directory to %s"
msgstr "不能读 inodes"

#: sys-utils/switch_root.c:160
#, fuzzy, c-format
msgid "failed to mount moving %s to /"
msgstr "不能读 inodes"

#: sys-utils/switch_root.c:166
#, fuzzy
msgid "failed to change root"
msgstr "不能为 inodes 分配缓冲区"

#: sys-utils/switch_root.c:185
#, fuzzy, c-format
msgid " %s [options] <newrootdir> <init> <args to init>\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/switch_root.c:217
#, fuzzy
msgid "failed. Sorry."
msgstr "%s 失败.\n"

#: sys-utils/switch_root.c:220
#, fuzzy, c-format
msgid "cannot access %s"
msgstr "%s:不是一个块设备\n"

#: sys-utils/tunelp.c:83
msgid " -i, --irq <num>              specify parallel port irq\n"
msgstr ""

#: sys-utils/tunelp.c:84
msgid " -t, --time <ms>              driver wait time in milliseconds\n"
msgstr ""

#: sys-utils/tunelp.c:85
msgid ""
" -c, --chars <num>            number of output characters before sleep\n"
msgstr ""

#: sys-utils/tunelp.c:86
msgid " -w, --wait <us>              strobe wait in micro seconds\n"
msgstr ""

#. TRANSLATORS: do not translate <on|off> arguments. The
#. argument reader does not recognize locale, unless `on' is
#. exactly that very same string.
#: sys-utils/tunelp.c:90
msgid " -a, --abort <on|off>         abort on error\n"
msgstr ""

#: sys-utils/tunelp.c:91
msgid " -o, --check-status <on|off>  check printer status before printing\n"
msgstr ""

#: sys-utils/tunelp.c:92
msgid " -C, --careful <on|off>       extra checking to status check\n"
msgstr ""

#: sys-utils/tunelp.c:93
msgid " -s, --status                 query printer status\n"
msgstr ""

#: sys-utils/tunelp.c:94
msgid " -T, --trust-irq <on|off>     make driver to trust irq\n"
msgstr ""

#: sys-utils/tunelp.c:95
msgid " -r, --reset                  reset the port\n"
msgstr ""

#: sys-utils/tunelp.c:96
msgid " -q, --print-irq <on|off>     display current irq setting\n"
msgstr ""

#: sys-utils/tunelp.c:109
msgid "bad value"
msgstr ""

#: sys-utils/tunelp.c:271
#, fuzzy, c-format
msgid "%s not an lp device"
msgstr "%s:不是一个块设备\n"

#: sys-utils/tunelp.c:291
msgid "LPGETSTATUS error"
msgstr ""

#: sys-utils/tunelp.c:296
#, c-format
msgid "%s status is %d"
msgstr ""

#: sys-utils/tunelp.c:298
#, c-format
msgid ", busy"
msgstr ""

#: sys-utils/tunelp.c:300
#, c-format
msgid ", ready"
msgstr ""

#: sys-utils/tunelp.c:302
#, c-format
msgid ", out of paper"
msgstr ""

#: sys-utils/tunelp.c:304
#, c-format
msgid ", on-line"
msgstr ""

#: sys-utils/tunelp.c:306
#, c-format
msgid ", error"
msgstr ""

#: sys-utils/tunelp.c:312
#, fuzzy
msgid "ioctl failed"
msgstr "%s 失败.\n"

#: sys-utils/tunelp.c:322
msgid "LPGETIRQ error"
msgstr ""

#: sys-utils/tunelp.c:327
#, c-format
msgid "%s using IRQ %d\n"
msgstr ""

#: sys-utils/tunelp.c:329
#, c-format
msgid "%s using polling\n"
msgstr ""

#: sys-utils/umount.c:73
#, c-format
msgid ""
" %1$s [-hV]\n"
" %1$s -a [options]\n"
" %1$s [options] <source> | <directory>\n"
msgstr ""

#: sys-utils/umount.c:80
#, c-format
msgid ""
" -a, --all               umount all filesystems\n"
" -c, --no-canonicalize   don't canonicalize paths\n"
" -d, --detach-loop       if mounted loop device, also free this loop device\n"
"     --fake              dry run; skip the umount(2) syscall\n"
" -f, --force             force unmount (in case of an unreachable NFS "
"system)\n"
msgstr ""

#: sys-utils/umount.c:86
#, c-format
msgid ""
" -i, --internal-only     don't call the umount.<type> helpers\n"
" -n, --no-mtab           don't write to /etc/mtab\n"
" -l, --lazy              detach the filesystem now, and cleanup all later\n"
msgstr ""

#: sys-utils/umount.c:90
#, c-format
msgid ""
" -O, --test-opts <list>  limit the set of filesystems (use with -a)\n"
" -r, --read-only         In case unmounting fails, try to remount read-only\n"
" -t, --types <list>      limit the set of filesystem types\n"
" -v, --verbose           say what is being done\n"
msgstr ""

#: sys-utils/umount.c:179
#, fuzzy, c-format
msgid "%s: umount failed"
msgstr "%s 失败.\n"

#: sys-utils/umount.c:188
#, c-format
msgid "%s: filesystem umounted, but mount(8) failed"
msgstr ""

#: sys-utils/umount.c:202
#, fuzzy, c-format
msgid "%s: invalid block device"
msgstr "%s:不是一个块设备\n"

#: sys-utils/umount.c:208
#, fuzzy, c-format
msgid "%s: can't write superblock"
msgstr "不能写超级块"

#: sys-utils/umount.c:211
#, c-format
msgid ""
"%s: target is busy.\n"
"        (In some cases useful info about processes that use\n"
"         the device is found by lsof(8) or fuser(1))"
msgstr ""

#: sys-utils/umount.c:220
#, c-format
msgid "%s: must be superuser to umount"
msgstr ""

#: sys-utils/umount.c:223
#, c-format
msgid "%s: block devices not permitted on fs"
msgstr ""

#: sys-utils/umount.c:272
#, fuzzy
msgid "failed to set umount target"
msgstr "不能读 inodes"

#: sys-utils/unshare.c:60
#, fuzzy, c-format
msgid " %s [options] <program> [args...]\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/unshare.c:63
msgid ""
" -m, --mount       unshare mounts namespace\n"
" -u, --uts         unshare UTS namespace (hostname etc)\n"
" -i, --ipc         unshare System V IPC namespace\n"
" -n, --net         unshare network namespace\n"
msgstr ""

#: sys-utils/unshare.c:125
#, fuzzy
msgid "unshare failed"
msgstr "查找失败"

#: sys-utils/wdctl.c:44
msgid "Card previously reset the CPU"
msgstr ""

#: sys-utils/wdctl.c:45
msgid "External relay 1"
msgstr ""

#: sys-utils/wdctl.c:46
msgid "External relay 2"
msgstr ""

#: sys-utils/wdctl.c:47
#, fuzzy
msgid "Fan failed"
msgstr "%s 失败.\n"

#: sys-utils/wdctl.c:48
msgid "Keep alive ping reply"
msgstr ""

#: sys-utils/wdctl.c:49
msgid "Supports magic close char"
msgstr ""

#: sys-utils/wdctl.c:50
msgid "Reset due to CPU overheat"
msgstr ""

#: sys-utils/wdctl.c:51
msgid "Power over voltage"
msgstr ""

#: sys-utils/wdctl.c:52
msgid "Power bad/power fault"
msgstr ""

#: sys-utils/wdctl.c:53
msgid "Pretimeout (in seconds)"
msgstr ""

#: sys-utils/wdctl.c:54
msgid "Set timeout (in seconds)"
msgstr ""

#: sys-utils/wdctl.c:70
msgid "flag name"
msgstr ""

#: sys-utils/wdctl.c:71
#, fuzzy
msgid "flag description"
msgstr "设置只读"

#: sys-utils/wdctl.c:72
msgid "flag status"
msgstr ""

#: sys-utils/wdctl.c:73
#, fuzzy
msgid "flag boot status"
msgstr "不能读 inodes"

#: sys-utils/wdctl.c:74
msgid "watchdog device name"
msgstr ""

#: sys-utils/wdctl.c:108
#, fuzzy, c-format
msgid "unknown flag: %s"
msgstr "%s: 未知命令: %s\n"

#: sys-utils/wdctl.c:145
#, fuzzy, c-format
msgid " %s [options] [<device> ...]\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/wdctl.c:149
msgid ""
" -f, --flags <list>    print selected flags only\n"
" -F, --noflags         don't print information about flags\n"
" -I, --noident         don't print watchdog identity information\n"
" -n, --noheadings      don't print headings for flags table\n"
" -O, --oneline         print all information on one line\n"
" -o, --output <list>   output columns of the flags\n"
" -r, --raw             use raw output format for flags table\n"
" -T, --notimeouts      don't print watchdog timeouts\n"
" -x, --flags-only      print only flags table (same as -I -T)\n"
msgstr ""

#: sys-utils/wdctl.c:164
#, c-format
msgid "The default device is %s.\n"
msgstr ""

#: sys-utils/wdctl.c:167
#, fuzzy
msgid "Available columns:\n"
msgstr "可用的命令:\n"

#: sys-utils/wdctl.c:253
#, c-format
msgid "%s: unknown flags 0x%x\n"
msgstr ""

#: sys-utils/wdctl.c:283
#, c-format
msgid "%s: watchdog already in use, terminating."
msgstr ""

#: sys-utils/wdctl.c:290
#, fuzzy, c-format
msgid "%s: failed to get information about watchdog"
msgstr "在 write_block 中查找失败"

#: sys-utils/wdctl.c:311
#, fuzzy, c-format
msgid "%s: failed to disarm watchdog"
msgstr "%s:不是一个块设备\n"

#: sys-utils/wdctl.c:371 sys-utils/wdctl.c:373 sys-utils/wdctl.c:375
#, c-format
msgid "%-15s%2i seconds\n"
msgstr ""

#: sys-utils/wdctl.c:371
msgid "Timeout:"
msgstr ""

#: sys-utils/wdctl.c:373
msgid "Pre-timeout:"
msgstr ""

#: sys-utils/wdctl.c:375
msgid "Timeleft:"
msgstr ""

#: sys-utils/wdctl.c:497
msgid "Device:"
msgstr ""

#: sys-utils/wdctl.c:498
#, c-format
msgid "%-15s%s [version %x]\n"
msgstr ""

#: term-utils/agetty.c:435
#, fuzzy, c-format
msgid "%s: can't change root directory %s: %m"
msgstr "查找失败"

#: term-utils/agetty.c:440
#, fuzzy, c-format
msgid "%s: can't change working directory %s: %m"
msgstr "查找失败"

#: term-utils/agetty.c:445
#, c-format
msgid "%s: can't change process priority: %m"
msgstr ""

#: term-utils/agetty.c:451
#, c-format
msgid "%s: can't exec %s: %m"
msgstr ""

#: term-utils/agetty.c:480 term-utils/agetty.c:737 term-utils/agetty.c:749
#: term-utils/agetty.c:1457 term-utils/agetty.c:1817
#, fuzzy, c-format
msgid "failed to allocate memory: %m"
msgstr "不能为 inodes 分配缓冲区"

#: term-utils/agetty.c:654
#, c-format
msgid "bad timeout value: %s"
msgstr ""

#: term-utils/agetty.c:767
#, c-format
msgid "bad speed: %s"
msgstr ""

#: term-utils/agetty.c:769
msgid "too many alternate speeds"
msgstr ""

#: term-utils/agetty.c:890 term-utils/agetty.c:907 term-utils/agetty.c:942
#, c-format
msgid "/dev/%s: cannot open as standard input: %m"
msgstr ""

#: term-utils/agetty.c:911 term-utils/agetty.c:915
#, c-format
msgid "/dev/%s: not a character device"
msgstr ""

#: term-utils/agetty.c:956
#, c-format
msgid "%s: not open for read/write"
msgstr ""

#: term-utils/agetty.c:973
#, c-format
msgid "%s: dup problem: %m"
msgstr ""

#: term-utils/agetty.c:1268
msgid "Num Lock off"
msgstr ""

#: term-utils/agetty.c:1271
msgid "Num Lock on"
msgstr ""

#: term-utils/agetty.c:1274
msgid "Caps Lock on"
msgstr ""

#: term-utils/agetty.c:1277
msgid "Scroll Lock on"
msgstr ""

#: term-utils/agetty.c:1280
#, c-format
msgid ""
"Hint: %s\n"
"\n"
msgstr ""

#: term-utils/agetty.c:1383
#, c-format
msgid "%s: read: %m"
msgstr ""

#: term-utils/agetty.c:1437
#, c-format
msgid "%s: input overrun"
msgstr ""

#: term-utils/agetty.c:1587
#, c-format
msgid ""
"\n"
"Usage:\n"
" %1$s [options] line baud_rate,... [termtype]\n"
" %1$s [options] baud_rate,... line [termtype]\n"
msgstr ""

#: term-utils/agetty.c:1592
#, c-format
msgid ""
"\n"
"Options:\n"
" -8, --8bits                assume 8-bit tty\n"
" -a, --autologin <user>     login the specified user automatically\n"
" -c, --noreset              do not reset control mode\n"
" -f, --issue-file <file>    display issue file\n"
" -h, --flow-control         enable hardware flow control\n"
" -H, --host <hostname>      specify login host\n"
" -i, --noissue              do not display issue file\n"
" -I, --init-string <string> set init string\n"
" -l, --login-program <file> specify login program\n"
" -L, --local-line           force local line\n"
" -m, --extract-baud         extract baud rate during connect\n"
" -n, --skip-login           do not prompt for login\n"
" -o, --login-options <opts> options that are passed to login\n"
" -p, --loginpause           wait for any key before the login\n"
" -R, --hangup               do virtually hangup on the tty\n"
" -s, --keep-baud            try to keep baud rate after break\n"
" -t, --timeout <number>     login process timeout\n"
" -U, --detect-case          detect uppercase terminal\n"
" -w, --wait-cr              wait carriage-return\n"
"     --noclear              do not clear the screen before prompt\n"
"     --nohints              do not print hints\n"
"     --nonewline            do not print a newline before issue\n"
"     --no-hostname          no hostname at all will be shown\n"
"     --long-hostname        show full qualified hostname\n"
"     --version              output version information and exit\n"
"     --help                 display this help and exit\n"
"\n"
msgstr ""

#: term-utils/agetty.c:1801
#, c-format
msgid "user"
msgstr ""

#: term-utils/agetty.c:1801
#, c-format
msgid "users"
msgstr ""

#: term-utils/mesg.c:74
#, fuzzy, c-format
msgid " %s [options] [y | n]\n"
msgstr "用法: %s [ -n ] device\n"

#: term-utils/mesg.c:77
msgid ""
" -v, --verbose      explain what is being done\n"
" -V, --version      output version information and exit\n"
" -h, --help         output help screen and exit\n"
"\n"
msgstr ""

#: term-utils/mesg.c:121
#, fuzzy
msgid "ttyname failed"
msgstr "查找失败"

#: term-utils/mesg.c:124
#, fuzzy, c-format
msgid "stat %s failed"
msgstr "%s 失败.\n"

#: term-utils/mesg.c:128
msgid "is y"
msgstr ""

#: term-utils/mesg.c:131
msgid "is n"
msgstr ""

#: term-utils/mesg.c:142 term-utils/mesg.c:148
#, fuzzy, c-format
msgid "change %s mode failed"
msgstr "%s 失败.\n"

#: term-utils/mesg.c:144
msgid "write access to your terminal is allowed"
msgstr ""

#: term-utils/mesg.c:150
msgid "write access to your terminal is denied"
msgstr ""

#: term-utils/mesg.c:153
#, fuzzy, c-format
msgid "invalid argument: %s"
msgstr "查找失败"

#: term-utils/script.c:122
#, c-format
msgid ""
"output file `%s' is a link\n"
"Use --force if you really want to use it.\n"
"Program not started."
msgstr ""

#: term-utils/script.c:132
#, fuzzy, c-format
msgid " %s [options] [file]\n"
msgstr "用法: %s [ -n ] device\n"

#: term-utils/script.c:135
msgid ""
" -a, --append            append the output\n"
" -c, --command <command> run command rather than interactive shell\n"
" -e, --return            return exit code of the child process\n"
" -f, --flush             run flush after each write\n"
"     --force             use output file even when it is a link\n"
" -q, --quiet             be quiet\n"
" -t, --timing[=<file>]   output timing data to stderr (or to FILE)\n"
" -V, --version           output version information and exit\n"
" -h, --help              display this help and exit\n"
"\n"
msgstr ""

#: term-utils/script.c:208 term-utils/scriptreplay.c:197
#, c-format
msgid "cannot open timing file %s"
msgstr ""

#: term-utils/script.c:243
#, c-format
msgid "Script started, file is %s\n"
msgstr ""

#: term-utils/script.c:365
#, c-format
msgid "Script started on %s"
msgstr ""

#: term-utils/script.c:401
#, fuzzy
msgid "cannot write script file"
msgstr "%s: 不能打开 %s\n"

#: term-utils/script.c:481
#, c-format
msgid ""
"\n"
"Script done on %s"
msgstr ""

#: term-utils/script.c:491
#, c-format
msgid "Script done, file is %s\n"
msgstr ""

#: term-utils/script.c:513
#, fuzzy
msgid "openpty failed"
msgstr "查找失败"

#: term-utils/script.c:549
msgid "out of pty's"
msgstr ""

#: term-utils/scriptreplay.c:42
#, c-format
msgid " %s [-t] timingfile [typescript] [divisor]\n"
msgstr ""

#: term-utils/scriptreplay.c:46
msgid ""
" -t, --timing <file>     script timing output file\n"
" -s, --typescript <file> script terminal session output file\n"
" -d, --divisor <num>     speed up or slow down execution with time divisor\n"
" -V, --version           output version information and exit\n"
" -h, --help              display this help and exit\n"
"\n"
msgstr ""

#: term-utils/scriptreplay.c:65
#, c-format
msgid "expected a number, but got '%s'"
msgstr ""

#: term-utils/scriptreplay.c:68 term-utils/scriptreplay.c:72
#, c-format
msgid "divisor '%s'"
msgstr ""

#: term-utils/scriptreplay.c:116
msgid "write to stdout failed"
msgstr ""

#: term-utils/scriptreplay.c:122
#, c-format
msgid "unexpected end of file on %s"
msgstr ""

#: term-utils/scriptreplay.c:124
#, c-format
msgid "failed to read typescript file %s"
msgstr ""

#: term-utils/scriptreplay.c:185
msgid "wrong number of arguments"
msgstr ""

#: term-utils/scriptreplay.c:200
#, c-format
msgid "cannot open typescript file %s"
msgstr ""

#: term-utils/scriptreplay.c:215
#, c-format
msgid "failed to read timing file %s"
msgstr ""

#: term-utils/scriptreplay.c:217
#, c-format
msgid "timings file %s: %lu: unexpected format"
msgstr ""

#: term-utils/setterm.c:674
#, fuzzy
msgid "Argument error."
msgstr "内部错误"

#: term-utils/setterm.c:681
msgid ""
" -term <terminal_name>\n"
" -reset\n"
" -initialize\n"
" -cursor <on|off>\n"
" -repeat <on|off>\n"
" -appcursorkeys <on|off>\n"
" -linewrap <on|off>\n"
" -default\n"
" -foreground <black|blue|green|cyan|red|magenta|yellow|white|default>\n"
" -background <black|blue|green|cyan|red|magenta|yellow|white|default>\n"
" -ulcolor <black|grey|blue|green|cyan|red|magenta|yellow|white>\n"
" -ulcolor <bright blue|green|cyan|red|magenta|yellow|white>\n"
" -hbcolor <black|grey|blue|green|cyan|red|magenta|yellow|white>\n"
" -hbcolor <bright blue|green|cyan|red|magenta|yellow|white>\n"
" -inversescreen <on|off>\n"
" -bold <on|off>\n"
" -half-bright <on|off>\n"
" -blink <on|off>\n"
" -reverse <on|off>\n"
" -underline <on|off>\n"
" -store >\n"
" -clear <all|rest>\n"
" -tabs < tab1 tab2 tab3 ... >      (tabn = 1-160)\n"
" -clrtabs < tab1 tab2 tab3 ... >   (tabn = 1-160)\n"
" -regtabs <1-160>\n"
" -blank <0-60|force|poke>\n"
" -dump   <1-NR_CONSOLES>\n"
" -append <1-NR_CONSOLES>\n"
" -file dumpfilename\n"
" -msg <on|off>\n"
" -msglevel <0-8>\n"
" -powersave <on|vsync|hsync|powerdown|off>\n"
" -powerdown <0-60>\n"
" -blength <0-2000>\n"
" -bfreq freqnumber\n"
" -version\n"
" -help\n"
msgstr ""

#: term-utils/setterm.c:1072
msgid "cannot force blank"
msgstr ""

#: term-utils/setterm.c:1076
msgid "cannot force unblank"
msgstr ""

#: term-utils/setterm.c:1082
msgid "cannot get blank status"
msgstr ""

#: term-utils/setterm.c:1094
#, fuzzy
msgid "cannot (un)set powersave mode"
msgstr "%s: 不能打开 %s\n"

#: term-utils/setterm.c:1114
#, fuzzy, c-format
msgid "can not open dump file %s for output"
msgstr "%s: 不能打开 %s\n"

#: term-utils/setterm.c:1131 term-utils/setterm.c:1139
#, fuzzy
msgid "klogctl error"
msgstr "内部错误"

#: term-utils/setterm.c:1205
msgid "Error writing screendump"
msgstr ""

#: term-utils/setterm.c:1212
#, fuzzy, c-format
msgid "Couldn't read %s"
msgstr "%s 失败.\n"

#: term-utils/setterm.c:1266
msgid "$TERM is not defined."
msgstr ""

#: term-utils/setterm.c:1274
msgid "terminfo database cannot be found"
msgstr ""

#: term-utils/setterm.c:1276
#, c-format
msgid "%s: unknown terminal type"
msgstr ""

#: term-utils/setterm.c:1278
msgid "terminal is hardcopy"
msgstr ""

#: term-utils/ttymsg.c:77
msgid "too many iov's (change code in wall/ttymsg.c)"
msgstr ""

#: term-utils/ttymsg.c:87
#, c-format
msgid "excessively long line arg"
msgstr ""

#: term-utils/ttymsg.c:142
#, c-format
msgid "cannot fork"
msgstr ""

#: term-utils/ttymsg.c:146
#, c-format
msgid "fork: %s"
msgstr ""

#: term-utils/ttymsg.c:176
#, c-format
msgid "%s: BAD ERROR, message is far too long"
msgstr ""

#: term-utils/wall.c:83
#, fuzzy, c-format
msgid " %s [options] [<file>]\n"
msgstr "用法: %s [ -n ] device\n"

#: term-utils/wall.c:86
msgid ""
" -n, --nobanner          do not print banner, works only for root\n"
" -t, --timeout <timeout> write timeout in seconds\n"
" -V, --version           output version information and exit\n"
" -h, --help              display this help and exit\n"
"\n"
msgstr ""

#: term-utils/wall.c:125
msgid "--nobanner is available only for root"
msgstr ""

#: term-utils/wall.c:130
#, c-format
msgid "invalid timeout argument: %s"
msgstr ""

#: term-utils/wall.c:202
#, fuzzy
msgid "cannot get passwd uid"
msgstr "%s: 不能打开 %s\n"

#: term-utils/wall.c:207
msgid "cannot get tty name"
msgstr ""

#: term-utils/wall.c:223
#, c-format
msgid "Broadcast Message from %s@%s"
msgstr ""

#: term-utils/wall.c:243
#, c-format
msgid "will not read %s - use stdin."
msgstr ""

#: term-utils/wall.c:269
#, fuzzy
msgid "fstat failed"
msgstr "%s 失败.\n"

#: term-utils/wall.c:275
#, fuzzy
msgid "fread failed"
msgstr "查找失败"

#: term-utils/write.c:81
#, fuzzy, c-format
msgid " %s [options] <user> [<ttyname>]\n"
msgstr "用法: %s [ -n ] device\n"

#: term-utils/write.c:85
msgid ""
" -V, --version    output version information and exit\n"
" -h, --help       display this help and exit\n"
"\n"
msgstr ""

#: term-utils/write.c:137
msgid "can't find your tty's name"
msgstr ""

#: term-utils/write.c:150
msgid "you have write permission turned off"
msgstr ""

#: term-utils/write.c:168
#, fuzzy, c-format
msgid "%s is not logged in on %s"
msgstr "%s 已经挂载.\t"

#: term-utils/write.c:174
#, c-format
msgid "%s has messages disabled on %s"
msgstr ""

#: term-utils/write.c:269
#, fuzzy, c-format
msgid "%s is not logged in"
msgstr "%s 已经挂载.\t"

#: term-utils/write.c:276
#, c-format
msgid "%s has messages disabled"
msgstr ""

#: term-utils/write.c:278
#, c-format
msgid "%s is logged in more than once; writing to %s"
msgstr ""

#: term-utils/write.c:326
#, c-format
msgid "tty path %s too long"
msgstr ""

#: term-utils/write.c:342
#, c-format
msgid "Message from %s@%s (as %s) on %s at %s ..."
msgstr ""

#: term-utils/write.c:345
#, c-format
msgid "Message from %s@%s on %s at %s ..."
msgstr ""

#: term-utils/write.c:372
#, fuzzy
msgid "carefulputc failed"
msgstr "查找失败"

#: text-utils/col.c:125
#, c-format
msgid ""
"\n"
"Options:\n"
" -b, --no-backspaces    do not output backspaces\n"
" -f, --fine             permit forward half line feeds\n"
" -p, --pass             pass unknown control sequences\n"
" -h, --tabs             convert spaces to tabs\n"
" -x, --spaces           convert tabs to spaces\n"
" -l, --lines NUM        buffer at least NUM lines\n"
" -V, --version          output version information and exit\n"
" -H, --help             display this help and exit\n"
"\n"
msgstr ""

#: text-utils/col.c:136 text-utils/colrm.c:67
#, c-format
msgid ""
"%s reads from standard input and writes to standard output\n"
"\n"
msgstr ""

#: text-utils/col.c:144
#, fuzzy
msgid "write error."
msgstr "内部错误"

#: text-utils/col.c:199
msgid "bad -l argument"
msgstr ""

#: text-utils/col.c:324
#, c-format
msgid "warning: can't back up %s."
msgstr ""

#: text-utils/col.c:325
msgid "past first line"
msgstr ""

#: text-utils/col.c:325
msgid "-- line already flushed"
msgstr ""

#: text-utils/colcrt.c:314
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options] [file ...]\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/colcrt.c:318
#, c-format
msgid ""
" -,  --no-underlining  suppress all underlining\n"
" -2, --half-lines      print all half-lines\n"
" -V, --version         output version information and exit\n"
" -h, --help            display this help and exit\n"
"\n"
msgstr ""

#: text-utils/colrm.c:59
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [startcol [endcol]]\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/colrm.c:63
#, c-format
msgid ""
"\n"
"Options:\n"
" -V, --version   output version information and exit\n"
" -h, --help      display this help and exit\n"
"\n"
msgstr ""

#: text-utils/colrm.c:185
#, fuzzy
msgid "first argument"
msgstr "%s 需要一个参数\n"

#: text-utils/colrm.c:187
#, fuzzy
msgid "second argument"
msgstr "%s 需要一个参数\n"

#: text-utils/column.c:90
#, fuzzy, c-format
msgid ""
"\n"
"Usage: %s [options] [file ...]\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/column.c:95
#, c-format
msgid ""
" -h, --help               displays this help text\n"
" -V, --version            output version information and exit\n"
" -c, --columns <width>    width of output in number of characters\n"
" -t, --table              create a table\n"
" -s, --separator <string> table delimeter\n"
" -x, --fillrows           fill rows before columns\n"
msgstr ""

#: text-utils/column.c:102
#, c-format
msgid ""
"\n"
"For more information see column(1).\n"
msgstr ""

#: text-utils/column.c:150
#, fuzzy
msgid "invalid columns argument"
msgstr "不能读 inodes"

#: text-utils/column.c:351
#, c-format
msgid "line %d is too long, output will be truncated"
msgstr ""

#: text-utils/display.c:262
#, fuzzy
msgid "all input file arguments failed"
msgstr "查找失败"

#: text-utils/hexdump.c:66
msgid ""
"calling hexdump as od has been deprecated in favour to GNU coreutils od."
msgstr ""

#: text-utils/hexsyntax.c:123
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options] file...\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/hexsyntax.c:127
#, c-format
msgid ""
"\n"
"Options:\n"
" -b              one-byte octal display\n"
" -c              one-byte character display\n"
" -C              canonical hex+ASCII display\n"
" -d              two-byte decimal display\n"
" -o              two-byte octal display\n"
" -x              two-byte hexadecimal display\n"
" -e format       format string to be used for displaying data\n"
" -f format_file  file that contains format strings\n"
" -n length       interpret only length bytes of input\n"
" -s offset       skip offset bytes from the beginning\n"
" -v              display without squeezing similar lines\n"
" -V              output version information and exit\n"
"\n"
msgstr ""

#: text-utils/more.c:300
#, fuzzy, c-format
msgid ""
"Usage: %s [options] file...\n"
"\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/more.c:303
#, c-format
msgid ""
"Options:\n"
"  -d        display help instead of ring bell\n"
"  -f        count logical, rather than screen lines\n"
"  -l        suppress pause after form feed\n"
"  -p        suppress scroll, clean screen and display text\n"
"  -c        suppress scroll, display text and clean line ends\n"
"  -u        suppress underlining\n"
"  -s        squeeze multiple blank lines into one\n"
"  -NUM      specify the number of lines per screenful\n"
"  +NUM      display file beginning from line number NUM\n"
"  +/STRING  display file beginning from search string match\n"
"  -V        output version information and exit\n"
msgstr ""

#: text-utils/more.c:540
#, fuzzy, c-format
msgid "more (%s)\n"
msgstr "%s (%s)\n"

#: text-utils/more.c:544
#, fuzzy, c-format
msgid "unknown option -%s"
msgstr "%s: 未知命令: %s\n"

#: text-utils/more.c:575
#, c-format
msgid ""
"\n"
"*** %s: directory ***\n"
"\n"
msgstr ""

#: text-utils/more.c:619
#, c-format
msgid ""
"\n"
"******** %s: Not a text file ********\n"
"\n"
msgstr ""

#: text-utils/more.c:723
#, c-format
msgid "[Use q or Q to quit]"
msgstr ""

#: text-utils/more.c:798
#, c-format
msgid "--More--"
msgstr ""

#: text-utils/more.c:800
#, c-format
msgid "(Next file: %s)"
msgstr ""

#: text-utils/more.c:805
#, c-format
msgid "[Press space to continue, 'q' to quit.]"
msgstr ""

#: text-utils/more.c:1238
#, c-format
msgid "...back %d pages"
msgstr ""

#: text-utils/more.c:1240
msgid "...back 1 page"
msgstr ""

#: text-utils/more.c:1283
msgid "...skipping one line"
msgstr ""

#: text-utils/more.c:1285
#, c-format
msgid "...skipping %d lines"
msgstr ""

#: text-utils/more.c:1322
msgid ""
"\n"
"***Back***\n"
"\n"
msgstr ""

#: text-utils/more.c:1338
msgid "No previous regular expression"
msgstr ""

#: text-utils/more.c:1367
msgid ""
"\n"
"Most commands optionally preceded by integer argument k.  Defaults in "
"brackets.\n"
"Star (*) indicates argument becomes new default.\n"
msgstr ""

#: text-utils/more.c:1374
msgid ""
"<space>                 Display next k lines of text [current screen size]\n"
"z                       Display next k lines of text [current screen size]*\n"
"<return>                Display next k lines of text [1]*\n"
"d or ctrl-D             Scroll k lines [current scroll size, initially 11]*\n"
"q or Q or <interrupt>   Exit from more\n"
"s                       Skip forward k lines of text [1]\n"
"f                       Skip forward k screenfuls of text [1]\n"
"b or ctrl-B             Skip backwards k screenfuls of text [1]\n"
"'                       Go to place where previous search started\n"
"=                       Display current line number\n"
"/<regular expression>   Search for kth occurrence of regular expression [1]\n"
"n                       Search for kth occurrence of last r.e [1]\n"
"!<cmd> or :!<cmd>       Execute <cmd> in a subshell\n"
"v                       Start up /usr/bin/vi at current line\n"
"ctrl-L                  Redraw screen\n"
":n                      Go to kth next file [1]\n"
":p                      Go to kth previous file [1]\n"
":f                      Display current file name and line number\n"
".                       Repeat previous command\n"
msgstr ""

#: text-utils/more.c:1443 text-utils/more.c:1448
#, c-format
msgid "[Press 'h' for instructions.]"
msgstr ""

#: text-utils/more.c:1482
#, c-format
msgid "\"%s\" line %d"
msgstr ""

#: text-utils/more.c:1484
#, c-format
msgid "[Not a file] line %d"
msgstr ""

#: text-utils/more.c:1568
msgid "  Overflow\n"
msgstr ""

#: text-utils/more.c:1618
msgid "...skipping\n"
msgstr ""

#: text-utils/more.c:1654
msgid ""
"\n"
"Pattern not found\n"
msgstr ""

#: text-utils/more.c:1657 text-utils/pg.c:1130 text-utils/pg.c:1281
msgid "Pattern not found"
msgstr ""

#: text-utils/more.c:1706
msgid "exec failed\n"
msgstr ""

#: text-utils/more.c:1720
msgid "can't fork\n"
msgstr ""

#: text-utils/more.c:1759
msgid ""
"\n"
"...Skipping "
msgstr ""

#: text-utils/more.c:1763
msgid "...Skipping to file "
msgstr ""

#: text-utils/more.c:1765
msgid "...Skipping back to file "
msgstr ""

#: text-utils/more.c:2041
msgid "Line too long"
msgstr ""

#: text-utils/more.c:2076
msgid "No previous command to substitute for"
msgstr ""

#: text-utils/parse.c:67
msgid "line too long"
msgstr ""

#: text-utils/parse.c:400
msgid "byte count with multiple conversion characters"
msgstr ""

#: text-utils/parse.c:479
#, c-format
msgid "bad byte count for conversion character %s"
msgstr ""

#: text-utils/parse.c:484
#, c-format
msgid "%%s requires a precision or a byte count"
msgstr ""

#: text-utils/parse.c:489
#, c-format
msgid "bad format {%s}"
msgstr ""

#: text-utils/parse.c:494
#, c-format
msgid "bad conversion character %%%s"
msgstr ""

#: text-utils/pg.c:147
msgid ""
"-------------------------------------------------------\n"
"  h                       this screen\n"
"  q or Q                  quit program\n"
"  <newline>               next page\n"
"  f                       skip a page forward\n"
"  d or ^D                 next halfpage\n"
"  l                       next line\n"
"  $                       last page\n"
"  /regex/                 search forward for regex\n"
"  ?regex? or ^regex^      search backward for regex\n"
"  . or ^L                 redraw screen\n"
"  w or z                  set page size and go to next page\n"
"  s filename              save current file to filename\n"
"  !command                shell escape\n"
"  p                       go to previous file\n"
"  n                       go to next file\n"
"\n"
"Many commands accept preceding numbers, for example:\n"
"+1<newline> (next page); -1<newline> (previous page); 1<newline> (first "
"page).\n"
"\n"
"See pg(1) for more information.\n"
"-------------------------------------------------------\n"
msgstr ""

#: text-utils/pg.c:224
#, fuzzy, c-format
msgid " %s [options] [+line] [+/pattern/] [files]\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/pg.c:227
msgid " -number      lines per page\n"
msgstr ""

#: text-utils/pg.c:228
msgid " -c           clear screen before displaying\n"
msgstr ""

#: text-utils/pg.c:229
msgid " -e           do not pause at end of a file\n"
msgstr ""

#: text-utils/pg.c:230
msgid " -f           do not split long lines\n"
msgstr ""

#: text-utils/pg.c:231
msgid " -n           terminate command with new line\n"
msgstr ""

#: text-utils/pg.c:232
msgid " -p <prompt>  specify prompt\n"
msgstr ""

#: text-utils/pg.c:233
msgid " -r           disallow shell escape\n"
msgstr ""

#: text-utils/pg.c:234
msgid " -s           print messages to stdout\n"
msgstr ""

#: text-utils/pg.c:235
msgid " +number      start at the given line\n"
msgstr ""

#: text-utils/pg.c:236
msgid " +/pattern/   start at the line containing pattern\n"
msgstr ""

#: text-utils/pg.c:237
msgid " -h           display this help and exit\n"
msgstr ""

#: text-utils/pg.c:238
msgid " -V           output version information and exit\n"
msgstr ""

#: text-utils/pg.c:246
#, c-format
msgid "%s: option requires an argument -- %s\n"
msgstr ""

#: text-utils/pg.c:254
#, c-format
msgid "%s: illegal option -- %s\n"
msgstr ""

#: text-utils/pg.c:371
msgid "...skipping forward\n"
msgstr ""

#: text-utils/pg.c:373
msgid "...skipping backward\n"
msgstr ""

#: text-utils/pg.c:395
msgid "No next file"
msgstr ""

#: text-utils/pg.c:399
msgid "No previous file"
msgstr ""

#: text-utils/pg.c:934
#, c-format
msgid "%s: Read error from %s file\n"
msgstr ""

#: text-utils/pg.c:940
#, c-format
msgid "%s: Unexpected EOF in %s file\n"
msgstr ""

#: text-utils/pg.c:943
#, c-format
msgid "%s: Unknown error in %s file\n"
msgstr ""

#: text-utils/pg.c:1038
#, c-format
msgid "%s: Cannot create tempfile\n"
msgstr ""

#: text-utils/pg.c:1047 text-utils/pg.c:1222 text-utils/pg.c:1249
msgid "RE error: "
msgstr ""

#: text-utils/pg.c:1204
msgid "(EOF)"
msgstr ""

#: text-utils/pg.c:1230 text-utils/pg.c:1257
msgid "No remembered search string"
msgstr ""

#: text-utils/pg.c:1313
msgid "Cannot open "
msgstr ""

#: text-utils/pg.c:1361
msgid "saved"
msgstr ""

#: text-utils/pg.c:1468
msgid ": !command not allowed in rflag mode.\n"
msgstr ""

#: text-utils/pg.c:1500
msgid "fork() failed, try again later\n"
msgstr ""

#: text-utils/pg.c:1592
#, c-format
msgid "%s %s Copyright (c) 2000-2001 Gunnar Ritter. All rights reserved.\n"
msgstr ""

#: text-utils/pg.c:1717
msgid "(Next file: "
msgstr ""

#: text-utils/rev.c:77
#, fuzzy, c-format
msgid "Usage: %s [options] [file ...]\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/rev.c:80
#, c-format
msgid ""
"\n"
"Options:\n"
" -V, --version   output version information and exit\n"
" -h, --help      display this help and exit\n"
msgstr ""

#: text-utils/rev.c:84
#, c-format
msgid ""
"\n"
"For more information see rev(1).\n"
msgstr ""

#: text-utils/tailf.c:62 text-utils/tailf.c:99
#, c-format
msgid "cannot open \"%s\" for read"
msgstr ""

#: text-utils/tailf.c:102 text-utils/tailf.c:280
#, c-format
msgid "cannot stat \"%s\""
msgstr ""

#: text-utils/tailf.c:115
#, c-format
msgid "incomplete write to \"%s\" (written %zd, expected %zd)\n"
msgstr ""

#: text-utils/tailf.c:161
#, c-format
msgid "%s: cannot add inotify watch (limit of inotify watches was reached)."
msgstr ""

#: text-utils/tailf.c:165
#, c-format
msgid "%s: cannot add inotify watch."
msgstr ""

#: text-utils/tailf.c:174
#, fuzzy, c-format
msgid "%s: cannot read inotify events"
msgstr "%s: 不能打开 %s\n"

#: text-utils/tailf.c:198
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [option] file\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/tailf.c:203
#, c-format
msgid ""
"\n"
"Options:\n"
" -n, --lines NUMBER  output the last NUMBER lines\n"
" -NUMBER             same as `-n NUMBER'\n"
" -V, --version       output version information and exit\n"
" -h, --help          display this help and exit\n"
"\n"
msgstr ""

#: text-utils/tailf.c:221 text-utils/tailf.c:262
#, fuzzy
msgid "failed to parse number of lines"
msgstr "不能读 inodes"

#: text-utils/tailf.c:275
msgid "no input file specified"
msgstr ""

#: text-utils/ul.c:136
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options] [file...]\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/ul.c:140
#, c-format
msgid ""
"\n"
"Options:\n"
" -t, --terminal TERMINAL    override the TERM environment variable\n"
" -i, --indicated            underlining is indicated via a separate line\n"
" -V, --version              output version information and exit\n"
" -h, --help                 display this help and exit\n"
"\n"
msgstr ""

#: text-utils/ul.c:210
msgid "trouble reading terminfo"
msgstr ""

#: text-utils/ul.c:215
#, c-format
msgid "terminal `%s' is not known, defaulting to `dumb'"
msgstr ""

#: text-utils/ul.c:311
#, c-format
msgid "unknown escape sequence in input: %o, %o"
msgstr ""

#: text-utils/ul.c:648
msgid "Input line too long."
msgstr ""

#~ msgid ""
#~ "usage: %s [-hv] [-x dir] file\n"
#~ " -h         print this help\n"
#~ " -x dir     extract into dir\n"
#~ " -v         be more verbose\n"
#~ " file       file to test\n"
#~ msgstr ""
#~ "用法: %s [-hv] [-x dir] file\n"
#~ " -h         打印帮助信息\n"
#~ " -x dir     解开到 dir 目录\n"
#~ " -v         更多输出信息\n"
#~ " file       用于测试的文件\n"

#~ msgid "Usage: %s [-larvsmf] /dev/name\n"
#~ msgstr "用法: %s [-larvsmf] /dev/name\n"

#, fuzzy
#~ msgid "failed to parse blocksize argument"
#~ msgstr "不能读 inodes"

#, fuzzy
#~ msgid ""
#~ "Usage: %s [options] <device>\n"
#~ "\n"
#~ "Options:\n"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid "failed to parse epoch"
#~ msgstr "不能读 inodes"

#, fuzzy
#~ msgid "cannot lock group file"
#~ msgstr "%s: 不能打开 %s\n"

#, fuzzy
#~ msgid "failed to parse timeout"
#~ msgstr "不能读 inodes"

#, fuzzy
#~ msgid "failed to parse sigval"
#~ msgstr "不能读 inodes"

#, fuzzy
#~ msgid "failed to parse port number"
#~ msgstr "不能读 inodes"

#, fuzzy
#~ msgid "warning: failed to read mtab"
#~ msgstr "不能读 inodes"

#, fuzzy
#~ msgid "failed to parse class data"
#~ msgstr "不能读 inodes"

#, fuzzy
#~ msgid "failed to parse class"
#~ msgstr "不能读 inodes"

#, fuzzy
#~ msgid "failed to parse buffer size"
#~ msgstr "不能读 inodes"

#, fuzzy
#~ msgid "failed to setup loop device"
#~ msgstr "%s:不是一个块设备\n"

#, fuzzy
#~ msgid "cannot parse PID"
#~ msgstr "%s: 不能打开 %s\n"

#, fuzzy
#~ msgid "failed to parse seconds value"
#~ msgstr "不能读 inodes"

#, fuzzy
#~ msgid "failed to parse time_t value"
#~ msgstr "不能读 inodes"

#, fuzzy
#~ msgid "%s: %d: parse error -- line ignored.\n"
#~ msgstr "%s: %s ioctl 错误\n"

#, fuzzy
#~ msgid "warning: failed to parse %s"
#~ msgstr "不能读 inodes"

#, fuzzy
#~ msgid "%-25s: failed: %s\n"
#~ msgstr "%s 失败.\n"

#, fuzzy
#~ msgid "%-25s: failed\n"
#~ msgstr "%s 失败.\n"

#, fuzzy
#~ msgid "setpwnam failed"
#~ msgstr "查找失败"

#, fuzzy
#~ msgid "%s: write failed"
#~ msgstr "%s 失败.\n"

#, fuzzy
#~ msgid "%s: cannot open lock file %s: %s\n"
#~ msgstr "%s: 不能打开 %s\n"

#, fuzzy
#~ msgid "%s: fork failed: %s\n"
#~ msgstr "%s 失败.\n"

#, fuzzy
#~ msgid ""
#~ "\n"
#~ "Usage:\n"
#~ "  %s [options] device [...]\n"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid ""
#~ "Usage: %s [options]\n"
#~ "\n"
#~ "Options:\n"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid ""
#~ "\n"
#~ "Usage:\n"
#~ " %s [options] [file]\n"
#~ msgstr "用法: %s [ -n ] device\n"

#~ msgid "  %s --report [devices]\n"
#~ msgstr "  %s --report [devices]\n"

#~ msgid "  %s [-v|-q] commands devices\n"
#~ msgstr "  %s [-v|-q] commands devices\n"

#~ msgid "Available commands:\n"
#~ msgstr "可用的命令:\n"

#~ msgid "usage: %s [ -n ] device\n"
#~ msgstr "用法: %s [ -n ] device\n"

#~ msgid "%s: not a block device\n"
#~ msgstr "%s:不是一个块设备\n"

#, fuzzy
#~ msgid "%s: calloc() failed: %s\n"
#~ msgstr "%s 失败.\n"

#, fuzzy
#~ msgid ""
#~ "Usage:\n"
#~ "  %s "
#~ msgstr "用法:\n"

#, fuzzy
#~ msgid "%s: Unable to allocate memory for fsck_path\n"
#~ msgstr "不能为 inodes 分配缓冲区"

#, fuzzy
#~ msgid "Usage: %s [y | n]"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid "usage: %s [-n] [file]\n"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid "can't read: %s"
#~ msgstr "%s 失败.\n"

#, fuzzy
#~ msgid "Usage: %s [-r] [-t]\n"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid "error: calloc failed"
#~ msgstr "查找失败"

#, fuzzy
#~ msgid "usage: %s [-bfpx] [-l nline]"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid "Usage: %s [file ...]\n"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid "Usage: %s [ -i ] [ -tTerm ] file...\n"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid "strdup failed"
#~ msgstr "%s 失败.\n"