# translation of util-linux-ng-2.14.1-rc2.po to
# Copyright (C) 2008
# This file is distributed under the same license as the util-linux package.
#
# Ray Wang <wanglei1123@gmail.com>, 2008.
msgid ""
msgstr ""
"Project-Id-Version: util-linux-ng-2.14.1-rc2\n"
"Report-Msgid-Bugs-To: util-linux@vger.kernel.org\n"
"POT-Creation-Date: 2011-08-29 12:13+0200\n"
"PO-Revision-Date: 2008-08-23 23:20+0800\n"
"Last-Translator: Ray Wang <wanglei1123@gmail.com>\n"
"Language-Team: Chinese (simplified) <i18n-zh@googlegroups.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: poedit-1.3.9-3.3\n"

#: disk-utils/blockdev.c:61
msgid "set read-only"
msgstr "设置只读"

#: disk-utils/blockdev.c:68
msgid "set read-write"
msgstr "设置读写"

#: disk-utils/blockdev.c:74
msgid "get read-only"
msgstr "获得只读"

#: disk-utils/blockdev.c:80
msgid "get discard zeroes support status"
msgstr ""

#: disk-utils/blockdev.c:86
#, fuzzy
msgid "get logical block (sector) size"
msgstr "获得段大小"

#: disk-utils/blockdev.c:92
#, fuzzy
msgid "get physical block (sector) size"
msgstr "获得段大小"

#: disk-utils/blockdev.c:98
msgid "get minimum I/O size"
msgstr ""

#: disk-utils/blockdev.c:104
msgid "get optimal I/O size"
msgstr ""

#: disk-utils/blockdev.c:110
#, fuzzy
msgid "get alignment offset in bytes"
msgstr "获得字节大小"

#: disk-utils/blockdev.c:116
msgid "get max sectors per request"
msgstr ""

#: disk-utils/blockdev.c:122
msgid "get blocksize"
msgstr "获得块大小"

#: disk-utils/blockdev.c:129
msgid "set blocksize"
msgstr "设置块大小"

#: disk-utils/blockdev.c:135
#, fuzzy
msgid "get 32-bit sector count (deprecated, use --getsz)"
msgstr "获得 32-bit 段数量"

#: disk-utils/blockdev.c:141
msgid "get size in bytes"
msgstr "获得字节大小"

# fuzzy
#: disk-utils/blockdev.c:148
msgid "set readahead"
msgstr "设置 readahead"

# fuzzy
#: disk-utils/blockdev.c:154
msgid "get readahead"
msgstr "获取 readahead"

# fuzzy
#: disk-utils/blockdev.c:161
msgid "set filesystem readahead"
msgstr "设置文件系统 readahead"

# fuzzy
#: disk-utils/blockdev.c:167
msgid "get filesystem readahead"
msgstr "获取文件系统 readahead"

#: disk-utils/blockdev.c:171
msgid "flush buffers"
msgstr "刷新缓存"

#: disk-utils/blockdev.c:175
msgid "reread partition table"
msgstr "重新读取分区表"

#: disk-utils/blockdev.c:182
#, c-format
msgid ""
"\n"
"Usage:\n"
" %1$s -V\n"
" %1$s --report [devices]\n"
" %1$s [-v|-q] commands devices\n"
"\n"
"Available commands:\n"
msgstr ""

#: disk-utils/blockdev.c:188
#, fuzzy, c-format
msgid " %-25s get size in 512-byte sectors\n"
msgstr "获得512字节的段大小"

#: disk-utils/blockdev.c:230 disk-utils/fsck.minix.c:1272
#: disk-utils/isosize.c:196 disk-utils/mkfs.c:59 disk-utils/mkfs.minix.c:662
#: misc-utils/ddate.c:181 mount/swapon.c:721 mount/swapon.c:773
#: sys-utils/readprofile.c:184 sys-utils/tunelp.c:86
#, c-format
msgid "%s (%s)\n"
msgstr "%s (%s)\n"

#: disk-utils/blockdev.c:274 disk-utils/blockdev.c:418
#: disk-utils/blockdev.c:443 disk-utils/mkfs.bfs.c:178
#: disk-utils/mkfs.cramfs.c:788 sys-utils/ldattach.c:273
#, c-format
msgid "cannot open %s"
msgstr ""

#: disk-utils/blockdev.c:309
msgid "could not get device size"
msgstr ""

#: disk-utils/blockdev.c:315
#, fuzzy, c-format
msgid "Unknown command: %s"
msgstr "%s: 未知命令: %s\n"

#: disk-utils/blockdev.c:331
#, fuzzy, c-format
msgid "%s requires an argument"
msgstr "%s 需要一个参数\n"

#: disk-utils/blockdev.c:368
#, c-format
msgid "%s failed.\n"
msgstr "%s 失败.\n"

#: disk-utils/blockdev.c:375
#, c-format
msgid "%s succeeded.\n"
msgstr "%s 成功.\n"

#: disk-utils/blockdev.c:459
#, fuzzy, c-format
msgid "ioctl error on %s"
msgstr "%s: %s ioctl 错误\n"

#: disk-utils/blockdev.c:467
#, c-format
msgid "RO    RA   SSZ   BSZ   StartSec            Size   Device\n"
msgstr "RO    RA   SSZ   BSZ   开始段            大小   设备\n"

#: disk-utils/elvtune.c:48
#, c-format
msgid "usage:\n"
msgstr "用法:\n"

#: disk-utils/elvtune.c:53
#, c-format
msgid "\tNOTE: elvtune only works with 2.4 kernels\n"
msgstr ""

#: disk-utils/elvtune.c:107
#, c-format
msgid "missing blockdevice, use -h for help\n"
msgstr ""

#: disk-utils/elvtune.c:128
#, c-format
msgid ""
"\n"
"elvtune is only useful on older kernels;\n"
"for 2.6 use IO scheduler sysfs tunables instead..\n"
msgstr ""

#: disk-utils/fdformat.c:27
#, c-format
msgid "Formatting ... "
msgstr "正在格式化 ... "

#: disk-utils/fdformat.c:47 disk-utils/fdformat.c:87
#, c-format
msgid "done\n"
msgstr "完成\n"

#: disk-utils/fdformat.c:58
#, c-format
msgid "Verifying ... "
msgstr "正在验证 ... "

#: disk-utils/fdformat.c:61 disk-utils/fdformat.c:153
#: disk-utils/mkfs.cramfs.c:663 term-utils/wall.c:262
#, fuzzy, c-format
msgid "cannot open file %s"
msgstr "%s: 不能打开 %s\n"

#: disk-utils/fdformat.c:70
msgid "Read: "
msgstr "读: "

#: disk-utils/fdformat.c:72
#, c-format
msgid "Problem reading cylinder %d, expected %d, read %d\n"
msgstr "读柱面 %d 时有问题, 期望 %d, 读取 %d\n"

#: disk-utils/fdformat.c:80
#, c-format
msgid ""
"bad data in cyl %d\n"
"Continuing ... "
msgstr ""
"不正确的数据在柱面 %d\n"
"继续 ... "

#: disk-utils/fdformat.c:94
#, fuzzy, c-format
msgid "Usage: %s [options] device\n"
msgstr "用法: %s [ -n ] device\n"

#: disk-utils/fdformat.c:97
#, c-format
msgid ""
"\n"
"Options:\n"
" -n, --no-verify  disable the verification after the format\n"
" -V, --version    output version information and exit\n"
" -h, --help       display this help and exit\n"
"\n"
msgstr ""

#: disk-utils/fdformat.c:129 disk-utils/mkfs.bfs.c:88
#: disk-utils/mkfs.cramfs.c:767 disk-utils/mkswap.c:498 fdisk/sfdisk.c:2614
#: fsck/fsck.c:1414 getopt/getopt.c:430 hwclock/hwclock.c:1354
#: misc-utils/cal.c:351 misc-utils/kill.c:195 misc-utils/logger.c:234
#: misc-utils/look.c:124 misc-utils/mcookie.c:116 misc-utils/namei.c:458
#: misc-utils/rename.c:99 misc-utils/uuidd.c:508 misc-utils/uuidgen.c:75
#: misc-utils/whereis.c:403 misc-utils/wipefs.c:361 schedutils/ionice.c:169
#: sys-utils/dmesg.c:685 term-utils/agetty.c:664 term-utils/mesg.c:103
#: term-utils/script.c:212 term-utils/scriptreplay.c:170
#: term-utils/setterm.c:811 term-utils/wall.c:139 term-utils/write.c:110
#: text-utils/col.c:210 text-utils/colcrt.c:116 text-utils/colrm.c:171
#: text-utils/column.c:149 text-utils/hexsyntax.c:114 text-utils/rev.c:112
#: text-utils/tailf.c:263 text-utils/ul.c:193
#, c-format
msgid "%s from %s\n"
msgstr ""

#: disk-utils/fdformat.c:144
#, fuzzy, c-format
msgid "cannot stat file %s"
msgstr "%s 失败.\n"

#: disk-utils/fdformat.c:147 misc-utils/lsblk.c:788 partx/partx.c:803
#: sys-utils/mountpoint.c:70
#, fuzzy, c-format
msgid "%s: not a block device"
msgstr "%s:不是一个块设备\n"

#: disk-utils/fdformat.c:149
#, fuzzy, c-format
msgid "cannot access file %s"
msgstr "%s:不是一个块设备\n"

#: disk-utils/fdformat.c:155
msgid "Could not determine current format type"
msgstr "不能决定当前格式类型"

#: disk-utils/fdformat.c:157
#, c-format
msgid "%s-sided, %d tracks, %d sec/track. Total capacity %d kB.\n"
msgstr "%s-面, %d 磁道, %d 秒/磁道. 总容量 %d kB.\n"

#: disk-utils/fdformat.c:158
msgid "Double"
msgstr ""

#: disk-utils/fdformat.c:158
msgid "Single"
msgstr ""

#: disk-utils/fsck.cramfs.c:113
#, c-format
msgid ""
"usage: %s [-hv] [-x dir] file\n"
" -h         print this help\n"
" -x dir     extract into dir\n"
" -v         be more verbose\n"
" file       file to test\n"
msgstr ""
"用法: %s [-hv] [-x dir] file\n"
" -h         打印帮助信息\n"
" -x dir     解开到 dir 目录\n"
" -v         更多输出信息\n"
" file       用于测试的文件\n"

#: disk-utils/fsck.cramfs.c:141
#, fuzzy, c-format
msgid "stat failed: %s"
msgstr "%s 失败.\n"

#: disk-utils/fsck.cramfs.c:145 disk-utils/fsck.cramfs.c:497
#: sys-utils/rtcwake.c:115 sys-utils/rtcwake.c:274 sys-utils/rtcwake.c:513
#: term-utils/script.c:233 term-utils/script.c:554
#, fuzzy, c-format
msgid "open failed: %s"
msgstr "查找失败"

#: disk-utils/fsck.cramfs.c:151
#, c-format
msgid "ioctl failed: unable to determine device size: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:157
#, fuzzy, c-format
msgid "not a block device or file: %s"
msgstr "%s:不是一个块设备\n"

#: disk-utils/fsck.cramfs.c:160 disk-utils/fsck.cramfs.c:194
msgid "file length too short"
msgstr ""

#: disk-utils/fsck.cramfs.c:164 disk-utils/fsck.cramfs.c:170
#: disk-utils/fsck.cramfs.c:226 disk-utils/fsck.cramfs.c:243
#, fuzzy, c-format
msgid "read failed: %s"
msgstr "查找失败"

#: disk-utils/fsck.cramfs.c:174 disk-utils/fsck.cramfs.c:176
msgid "superblock magic not found"
msgstr ""

#: disk-utils/fsck.cramfs.c:179
#, c-format
msgid "cramfs endianness is %s\n"
msgstr ""

#: disk-utils/fsck.cramfs.c:180
msgid "big"
msgstr ""

#: disk-utils/fsck.cramfs.c:180
msgid "little"
msgstr ""

# fuzzy
#: disk-utils/fsck.cramfs.c:184
#, fuzzy
msgid "unsupported filesystem features"
msgstr "设置文件系统 readahead"

#: disk-utils/fsck.cramfs.c:187
#, c-format
msgid "superblock size (%d) too small"
msgstr ""

#: disk-utils/fsck.cramfs.c:192
msgid "zero file count"
msgstr ""

#: disk-utils/fsck.cramfs.c:197
#, c-format
msgid "warning: file extends past end of filesystem\n"
msgstr ""

#: disk-utils/fsck.cramfs.c:199
#, c-format
msgid "warning: old cramfs format\n"
msgstr ""

#: disk-utils/fsck.cramfs.c:211
msgid "unable to test CRC: old cramfs format"
msgstr ""

#: disk-utils/fsck.cramfs.c:262
#, fuzzy
msgid "crc error"
msgstr "内部错误"

#: disk-utils/fsck.cramfs.c:323
#, fuzzy
msgid "root inode is not directory"
msgstr "根 inode 不是一个目录"

#: disk-utils/fsck.cramfs.c:327
#, c-format
msgid "bad root offset (%lu)"
msgstr ""

#: disk-utils/fsck.cramfs.c:345
msgid "data block too large"
msgstr ""

#: disk-utils/fsck.cramfs.c:349
#, c-format
msgid "decompression error %p(%d): %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:375
#, c-format
msgid "  hole at %ld (%zd)\n"
msgstr ""

#: disk-utils/fsck.cramfs.c:382 disk-utils/fsck.cramfs.c:536
#, c-format
msgid "  uncompressing block at %ld to %ld (%ld)\n"
msgstr ""

#: disk-utils/fsck.cramfs.c:389
#, c-format
msgid "non-block (%ld) bytes"
msgstr ""

#: disk-utils/fsck.cramfs.c:393
#, c-format
msgid "non-size (%ld vs %ld) bytes"
msgstr ""

#: disk-utils/fsck.cramfs.c:399
#, c-format
msgid "write failed: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:411
#, c-format
msgid "lchown failed: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:415
#, c-format
msgid "chown failed: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:420
#, c-format
msgid "utime failed: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:432
#, c-format
msgid "directory inode has zero offset and non-zero size: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:447
#, c-format
msgid "mkdir failed: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:463
msgid "filename length is zero"
msgstr ""

#: disk-utils/fsck.cramfs.c:465
msgid "bad filename length"
msgstr ""

#: disk-utils/fsck.cramfs.c:471
msgid "bad inode offset"
msgstr ""

#: disk-utils/fsck.cramfs.c:486
msgid "file inode has zero offset and non-zero size"
msgstr ""

#: disk-utils/fsck.cramfs.c:489
msgid "file inode has zero size and non-zero offset"
msgstr ""

#: disk-utils/fsck.cramfs.c:517
msgid "symbolic link has zero offset"
msgstr ""

#: disk-utils/fsck.cramfs.c:519
msgid "symbolic link has zero size"
msgstr ""

#: disk-utils/fsck.cramfs.c:528
#, c-format
msgid "size error in symlink: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:542
#, fuzzy, c-format
msgid "symlink failed: %s"
msgstr "查找失败"

#: disk-utils/fsck.cramfs.c:555
#, c-format
msgid "special file has non-zero offset: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:565
#, c-format
msgid "fifo has non-zero size: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:571
#, c-format
msgid "socket has non-zero size: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:574
#, c-format
msgid "bogus mode: %s (%o)"
msgstr ""

#: disk-utils/fsck.cramfs.c:583
#, c-format
msgid "mknod failed: %s"
msgstr ""

#: disk-utils/fsck.cramfs.c:615
#, c-format
msgid "directory data start (%ld) < sizeof(struct cramfs_super) + start (%ld)"
msgstr ""

#: disk-utils/fsck.cramfs.c:619
#, c-format
msgid "directory data end (%ld) != file data start (%ld)"
msgstr ""

#: disk-utils/fsck.cramfs.c:624
msgid "invalid file data offset"
msgstr ""

#: disk-utils/fsck.cramfs.c:658
msgid "compiled without -x support"
msgstr ""

#: disk-utils/fsck.cramfs.c:676 fdisk/sfdisk.c:2840
#, c-format
msgid "%s: OK\n"
msgstr ""

#: disk-utils/fsck.minix.c:196
#, c-format
msgid "Usage: %s [-larvsmf] /dev/name\n"
msgstr "用法: %s [-larvsmf] /dev/name\n"

#: disk-utils/fsck.minix.c:293
#, c-format
msgid "%s is mounted.\t "
msgstr "%s 已经挂载.\t"

#: disk-utils/fsck.minix.c:295
msgid "Do you really want to continue"
msgstr "你确认要继续"

#: disk-utils/fsck.minix.c:299
#, c-format
msgid "check aborted.\n"
msgstr "检查失败.\n"

#: disk-utils/fsck.minix.c:318 disk-utils/fsck.minix.c:341
#, c-format
msgid "Zone nr < FIRSTZONE in file `%s'."
msgstr ""

#: disk-utils/fsck.minix.c:322 disk-utils/fsck.minix.c:345
#, c-format
msgid "Zone nr >= ZONES in file `%s'."
msgstr ""

#: disk-utils/fsck.minix.c:327 disk-utils/fsck.minix.c:350
msgid "Remove block"
msgstr "删除块"

#: disk-utils/fsck.minix.c:368
#, c-format
msgid "Read error: unable to seek to block in file '%s'\n"
msgstr "读取错误: 不能在文件 '%s' 中查找到该块\n"

#: disk-utils/fsck.minix.c:374
#, c-format
msgid "Read error: bad block in file '%s'\n"
msgstr "读取错误: 文件 '%s' 中有坏块\n"

#: disk-utils/fsck.minix.c:389
#, c-format
msgid ""
"Internal error: trying to write bad block\n"
"Write request ignored\n"
msgstr ""
"内部错误: 试图写坏块\n"
"写请求忽略\n"

#: disk-utils/fsck.minix.c:395
msgid "seek failed in write_block"
msgstr "在 write_block 中查找失败"

#: disk-utils/fsck.minix.c:398
#, c-format
msgid "Write error: bad block in file '%s'\n"
msgstr "写入错误: 文件 '%s' 中有坏块\n"

#: disk-utils/fsck.minix.c:514
msgid "seek failed in write_super_block"
msgstr "在 write_super_block 中查找失败"

#: disk-utils/fsck.minix.c:516
msgid "unable to write super-block"
msgstr "不能写超级块"

#: disk-utils/fsck.minix.c:529
#, fuzzy
msgid "Unable to write inode map"
msgstr "不能写 inode map"

#: disk-utils/fsck.minix.c:532
msgid "Unable to write zone map"
msgstr "不能写 zone map"

#: disk-utils/fsck.minix.c:535
msgid "Unable to write inodes"
msgstr "不能写 inodes"

#: disk-utils/fsck.minix.c:563
msgid "seek failed"
msgstr "查找失败"

#: disk-utils/fsck.minix.c:567
#, fuzzy
msgid "unable to alloc buffer for superblock"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/fsck.minix.c:570
msgid "unable to read super block"
msgstr "不能读超级块"

#: disk-utils/fsck.minix.c:588
msgid "bad magic number in super-block"
msgstr ""

#: disk-utils/fsck.minix.c:590
msgid "Only 1k blocks/zones supported"
msgstr "只支持 1k 块/区"

#: disk-utils/fsck.minix.c:592
msgid "bad s_imap_blocks field in super-block"
msgstr "不正确的 s_imap_blocks 域在超级块中"

#: disk-utils/fsck.minix.c:594
msgid "bad s_zmap_blocks field in super-block"
msgstr "不正确的 s_zmap_blocks 域在超级块中"

#: disk-utils/fsck.minix.c:610
msgid "Unable to allocate buffer for inode map"
msgstr "不能为 inode map 分配缓冲区"

#: disk-utils/fsck.minix.c:613
msgid "Unable to allocate buffer for zone map"
msgstr "不能为 zone map 分配缓冲区"

#: disk-utils/fsck.minix.c:618
msgid "Unable to allocate buffer for inodes"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/fsck.minix.c:621
msgid "Unable to allocate buffer for inode count"
msgstr "不能为 inode count 分配缓冲区"

#: disk-utils/fsck.minix.c:624
msgid "Unable to allocate buffer for zone count"
msgstr "不能为 zone count 分配缓冲区"

#: disk-utils/fsck.minix.c:628
msgid "Unable to read inode map"
msgstr "不能读 inode map"

#: disk-utils/fsck.minix.c:632
msgid "Unable to read zone map"
msgstr "不能读 zone map"

#: disk-utils/fsck.minix.c:636
msgid "Unable to read inodes"
msgstr "不能读 inodes"

#: disk-utils/fsck.minix.c:638
#, c-format
msgid "Warning: Firstzone != Norm_firstzone\n"
msgstr "警告: Firstzone != Norm_firstzone\n"

#: disk-utils/fsck.minix.c:643
#, c-format
msgid "%ld inodes\n"
msgstr "%ld inodes\n"

#: disk-utils/fsck.minix.c:644
#, c-format
msgid "%ld blocks\n"
msgstr "%ld 块\n"

#: disk-utils/fsck.minix.c:645 disk-utils/mkfs.minix.c:541
#, c-format
msgid "Firstdatazone=%ld (%ld)\n"
msgstr "Firstdatazone=%ld (%ld)\n"

#: disk-utils/fsck.minix.c:646 disk-utils/mkfs.minix.c:542
#, c-format
msgid "Zonesize=%d\n"
msgstr "Zonesize=%d\n"

#: disk-utils/fsck.minix.c:647
#, c-format
msgid "Maxsize=%ld\n"
msgstr "Maxsize=%ld\n"

#: disk-utils/fsck.minix.c:648
#, c-format
msgid "Filesystem state=%d\n"
msgstr "Filesystem state=%d\n"

#: disk-utils/fsck.minix.c:649
#, fuzzy, c-format
msgid ""
"namelen=%zd\n"
"\n"
msgstr ""
"namelen=%d\n"
"\n"

#: disk-utils/fsck.minix.c:664 disk-utils/fsck.minix.c:715
#, c-format
msgid "Inode %d marked unused, but used for file '%s'\n"
msgstr "Inode %d 标记为未使用, 但用于文件 '%s'\n"

#: disk-utils/fsck.minix.c:668 disk-utils/fsck.minix.c:719
msgid "Mark in use"
msgstr "标记为已使用"

#: disk-utils/fsck.minix.c:690 disk-utils/fsck.minix.c:739
#, c-format
msgid "The file `%s' has mode %05o\n"
msgstr "文件 `%s' 的模式 %05o\n"

#: disk-utils/fsck.minix.c:697 disk-utils/fsck.minix.c:745
#, c-format
msgid "Warning: inode count too big.\n"
msgstr "警告: inode 计数太大.\n"

#: disk-utils/fsck.minix.c:757 disk-utils/fsck.minix.c:765
msgid "root inode isn't a directory"
msgstr "根 inode 不是一个目录"

#: disk-utils/fsck.minix.c:777 disk-utils/fsck.minix.c:808
#, c-format
msgid "Block has been used before. Now in file `%s'."
msgstr "块已经被使用, 现在在文件 `%s' 中."

#: disk-utils/fsck.minix.c:779 disk-utils/fsck.minix.c:810
#: disk-utils/fsck.minix.c:1133 disk-utils/fsck.minix.c:1143
#: disk-utils/fsck.minix.c:1189 disk-utils/fsck.minix.c:1198
msgid "Clear"
msgstr "清除"

#: disk-utils/fsck.minix.c:789 disk-utils/fsck.minix.c:820
#, c-format
msgid "Block %d in file `%s' is marked not in use."
msgstr "文件中块 %d `%s' 标记为没有使用."

#: disk-utils/fsck.minix.c:791 disk-utils/fsck.minix.c:822
msgid "Correct"
msgstr "正确"

#: disk-utils/fsck.minix.c:961 disk-utils/fsck.minix.c:1028
#, c-format
msgid "The directory '%s' contains a bad inode number for file '%.*s'."
msgstr "目录 '%s' 包含了一个不正确的 inode number 文件 '%.*s'. "

#: disk-utils/fsck.minix.c:964 disk-utils/fsck.minix.c:1031
msgid " Remove"
msgstr " 删除"

#: disk-utils/fsck.minix.c:978 disk-utils/fsck.minix.c:1045
#, c-format
msgid "%s: bad directory: '.' isn't first\n"
msgstr "%s: 不正确的目录: '.' 不是第一个\n"

#: disk-utils/fsck.minix.c:986 disk-utils/fsck.minix.c:1054
#, fuzzy, c-format
msgid "%s: bad directory: '..' isn't second\n"
msgstr "%s: 不正确的目录: '.' 不是第一个\n"

#: disk-utils/fsck.minix.c:1088 disk-utils/fsck.minix.c:1106
msgid "internal error"
msgstr "内部错误"

#: disk-utils/fsck.minix.c:1091 disk-utils/fsck.minix.c:1109
#, c-format
msgid "%s: bad directory: size < 32"
msgstr "%s: 不正确的目录: 大小 < 32"

#: disk-utils/fsck.minix.c:1122
msgid "seek failed in bad_zone"
msgstr ""

#: disk-utils/fsck.minix.c:1132 disk-utils/fsck.minix.c:1188
#, c-format
msgid "Inode %lu mode not cleared."
msgstr ""

#: disk-utils/fsck.minix.c:1141 disk-utils/fsck.minix.c:1197
#, c-format
msgid "Inode %lu not used, marked used in the bitmap."
msgstr ""

#: disk-utils/fsck.minix.c:1148 disk-utils/fsck.minix.c:1203
#, c-format
msgid "Inode %lu used, marked unused in the bitmap."
msgstr ""

#: disk-utils/fsck.minix.c:1150 disk-utils/fsck.minix.c:1204
msgid "Set"
msgstr ""

#: disk-utils/fsck.minix.c:1154 disk-utils/fsck.minix.c:1208
#, c-format
msgid "Inode %lu (mode = %07o), i_nlinks=%d, counted=%d."
msgstr ""

#: disk-utils/fsck.minix.c:1156 disk-utils/fsck.minix.c:1210
msgid "Set i_nlinks to count"
msgstr ""

#: disk-utils/fsck.minix.c:1168 disk-utils/fsck.minix.c:1222
#, c-format
msgid "Zone %lu: marked in use, no file uses it."
msgstr ""

#: disk-utils/fsck.minix.c:1169 disk-utils/fsck.minix.c:1224
msgid "Unmark"
msgstr ""

#: disk-utils/fsck.minix.c:1174 disk-utils/fsck.minix.c:1229
#, c-format
msgid "Zone %lu: in use, counted=%d\n"
msgstr ""

#: disk-utils/fsck.minix.c:1177 disk-utils/fsck.minix.c:1232
#, c-format
msgid "Zone %lu: not in use, counted=%d\n"
msgstr ""

#: disk-utils/fsck.minix.c:1277
msgid "bad inode size"
msgstr ""

#: disk-utils/fsck.minix.c:1279
msgid "bad v2 inode size"
msgstr ""

#: disk-utils/fsck.minix.c:1305
msgid "need terminal for interactive repairs"
msgstr ""

#: disk-utils/fsck.minix.c:1309
#, c-format
msgid "unable to open '%s': %s"
msgstr ""

#: disk-utils/fsck.minix.c:1324
#, c-format
msgid "%s is clean, no check.\n"
msgstr ""

#: disk-utils/fsck.minix.c:1328
#, c-format
msgid "Forcing filesystem check on %s.\n"
msgstr ""

#: disk-utils/fsck.minix.c:1330
#, c-format
msgid "Filesystem on %s is dirty, needs checking.\n"
msgstr ""

#: disk-utils/fsck.minix.c:1363
#, c-format
msgid ""
"\n"
"%6ld inodes used (%ld%%)\n"
msgstr ""

#: disk-utils/fsck.minix.c:1368
#, c-format
msgid "%6ld zones used (%ld%%)\n"
msgstr ""

#: disk-utils/fsck.minix.c:1370
#, c-format
msgid ""
"\n"
"%6d regular files\n"
"%6d directories\n"
"%6d character device files\n"
"%6d block device files\n"
"%6d links\n"
"%6d symbolic links\n"
"------\n"
"%6d files\n"
msgstr ""

#: disk-utils/fsck.minix.c:1383
#, c-format
msgid ""
"----------------------------\n"
"FILE SYSTEM HAS BEEN CHANGED\n"
"----------------------------\n"
msgstr ""

#: disk-utils/isosize.c:125
#, fuzzy, c-format
msgid "failed to open %s"
msgstr "不能读 inodes"

#: disk-utils/isosize.c:128
#, fuzzy, c-format
msgid "seek error on %s"
msgstr "%s: %s ioctl 错误\n"

#: disk-utils/isosize.c:131
#, fuzzy, c-format
msgid "read error on %s"
msgstr "%s: %s ioctl 错误\n"

#: disk-utils/isosize.c:138
#, c-format
msgid "sector count: %d, sector size: %d\n"
msgstr ""

#: disk-utils/isosize.c:155
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options] iso9660_image_file\n"
msgstr "用法: %s [ -n ] device\n"

#: disk-utils/isosize.c:159
#, c-format
msgid ""
"\n"
"Options:\n"
" -d, --divisor=NUM      devide bytes NUM\n"
" -x, --sectors          show sector count and size\n"
" -V, --version          output version information and exit\n"
" -H, --help             display this help and exit\n"
"\n"
msgstr ""

#: disk-utils/isosize.c:190
msgid "invalid divisor argument"
msgstr ""

#: disk-utils/mkfs.bfs.c:70
#, fuzzy, c-format
msgid "Usage: %s [options] device [block-count]\n"
msgstr "用法: %s [ -n ] device\n"

#: disk-utils/mkfs.bfs.c:72
#, c-format
msgid ""
"\n"
"Options:\n"
" -N, --inodes=NUM    specify desired number of inodes\n"
" -V, --vname=NAME    specify volume name\n"
" -F, --fname=NAME    specify file system name\n"
" -v, --verbose       explain what is being done\n"
" -c                  this option is silently ignored\n"
" -l                  this option is silently ignored\n"
" -V, --version       output version information and exit\n"
"                     -V as version must be only option\n"
" -h, --help          display this help and exit\n"
"\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:130
msgid "invalid number of inodes"
msgstr ""

#: disk-utils/mkfs.bfs.c:136
msgid "volume name too long"
msgstr ""

#: disk-utils/mkfs.bfs.c:143
msgid "fsname name too long"
msgstr ""

#: disk-utils/mkfs.bfs.c:171
#, c-format
msgid "cannot stat device %s"
msgstr ""

#: disk-utils/mkfs.bfs.c:174
#, c-format
msgid "%s is not a block special device"
msgstr ""

#: disk-utils/mkfs.bfs.c:182
msgid "invalid block-count"
msgstr ""

#: disk-utils/mkfs.bfs.c:188
#, c-format
msgid "cannot get size of %s"
msgstr ""

#: disk-utils/mkfs.bfs.c:193
#, c-format
msgid "blocks argument too large, max is %llu"
msgstr ""

#: disk-utils/mkfs.bfs.c:208
msgid "too many inodes - max is 512"
msgstr ""

#: disk-utils/mkfs.bfs.c:218
#, c-format
msgid "not enough space, need at least %llu blocks"
msgstr ""

#: disk-utils/mkfs.bfs.c:230 fdisk/fdisk.c:2680
#, c-format
msgid "Device: %s\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:231
#, c-format
msgid "Volume: <%-6s>\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:232
#, c-format
msgid "FSname: <%-6s>\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:233
#, c-format
msgid "BlockSize: %d\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:235
#, c-format
msgid "Inodes: %lu (in 1 block)\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:238
#, c-format
msgid "Inodes: %lu (in %llu blocks)\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:240
#, c-format
msgid "Blocks: %lld\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:241
#, c-format
msgid "Inode end: %d, Data end: %d\n"
msgstr ""

#: disk-utils/mkfs.bfs.c:246
msgid "error writing superblock"
msgstr ""

#: disk-utils/mkfs.bfs.c:266
msgid "error writing root inode"
msgstr ""

#: disk-utils/mkfs.bfs.c:271
msgid "error writing inode"
msgstr ""

#: disk-utils/mkfs.bfs.c:274
msgid "seek error"
msgstr ""

#: disk-utils/mkfs.bfs.c:280
msgid "error writing . entry"
msgstr ""

#: disk-utils/mkfs.bfs.c:284
msgid "error writing .. entry"
msgstr ""

#: disk-utils/mkfs.bfs.c:287
#, c-format
msgid "error closing %s"
msgstr ""

#: disk-utils/mkfs.c:38
#, fuzzy, c-format
msgid "Usage: %s [options] [-t type fs-options] device [size]\n"
msgstr "用法: %s [ -n ] device\n"

#: disk-utils/mkfs.c:41
#, c-format
msgid ""
"\n"
"Options:\n"
" -t, --type=TYPE  file system type, when undefined ext2 is used\n"
"     fs-options   parameters to real file system builder\n"
"     device       path to a device\n"
"     size         number of blocks on the device\n"
" -V, --verbose    explain what is done\n"
"                  defining -V more than once will cause a dry-run\n"
" -V, --version    output version information and exit\n"
"                  -V as version must be only option\n"
" -h, --help       display this help and exit\n"
msgstr ""

#: disk-utils/mkfs.c:52
#, c-format
msgid ""
"\n"
"For more information see mkfs(8).\n"
msgstr ""

#: disk-utils/mkfs.c:129
#, c-format
msgid "mkfs (%s)\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:125
#, c-format
msgid ""
"usage: %s [-h] [-v] [-b blksize] [-e edition] [-N endian] [-i file] [-n "
"name] dirname outfile\n"
" -h         print this help\n"
" -v         be verbose\n"
" -E         make all warnings errors (non-zero exit status)\n"
" -b blksize use this blocksize, must equal page size\n"
" -e edition set edition number (part of fsid)\n"
" -N endian  set cramfs endianness (big|little|host), default host\n"
" -i file    insert a file image into the filesystem (requires >= 2.4.0)\n"
" -n name    set name of cramfs filesystem\n"
" -p         pad by %d bytes for boot code\n"
" -s         sort directory entries (old option, ignored)\n"
" -z         make explicit holes (requires >= 2.3.39)\n"
" dirname    root of the filesystem to be compressed\n"
" outfile    output file\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:298
#, fuzzy, c-format
msgid "could not read directory %s"
msgstr "根 inode 不是一个目录"

#: disk-utils/mkfs.cramfs.c:323
#, c-format
msgid ""
"Very long (%zu bytes) filename `%s' found.\n"
" Please increase MAX_INPUT_NAMELEN in mkcramfs.c and recompile.  Exiting."
msgstr ""

#: disk-utils/mkfs.cramfs.c:445
msgid "filesystem too big.  Exiting."
msgstr ""

#: disk-utils/mkfs.cramfs.c:604
#, c-format
msgid "AIEEE: block \"compressed\" to > 2*blocklength (%ld)\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:623
#, c-format
msgid "%6.2f%% (%+ld bytes)\t%s\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:668
#, fuzzy, c-format
msgid "cannot close file %s"
msgstr "%s: 不能打开 %s\n"

#: disk-utils/mkfs.cramfs.c:728
#, fuzzy
msgid "failed to parse blocksize argument"
msgstr "不能读 inodes"

#: disk-utils/mkfs.cramfs.c:736
#, fuzzy
msgid "edition number argument failed"
msgstr "查找失败"

#: disk-utils/mkfs.cramfs.c:746
msgid "invalid endianness given. Must be 'big', 'little', or 'host'"
msgstr ""

#: disk-utils/mkfs.cramfs.c:752 disk-utils/mkfs.cramfs.c:785
#, fuzzy, c-format
msgid "cannot stat %s"
msgstr "%s: 不能打开 %s\n"

#: disk-utils/mkfs.cramfs.c:803
#, c-format
msgid ""
"warning: guestimate of required size (upper bound) is %lldMB, but maximum "
"image size is %uMB.  We might die prematurely."
msgstr ""

#: disk-utils/mkfs.cramfs.c:830
msgid "ROM image map"
msgstr ""

#: disk-utils/mkfs.cramfs.c:842
#, c-format
msgid "Including: %s\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:848
#, c-format
msgid "Directory data: %zd bytes\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:856
#, c-format
msgid "Everything: %zd kilobytes\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:861
#, c-format
msgid "Super block: %zd bytes\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:868
#, c-format
msgid "CRC: %x\n"
msgstr ""

#: disk-utils/mkfs.cramfs.c:873
#, c-format
msgid "not enough space allocated for ROM image (%lld allocated, %zu used)"
msgstr ""

#: disk-utils/mkfs.cramfs.c:879
msgid "ROM image"
msgstr ""

#: disk-utils/mkfs.cramfs.c:881
#, c-format
msgid "ROM image write failed (%zd %zd)"
msgstr ""

#: disk-utils/mkfs.cramfs.c:891
#, fuzzy
msgid "warning: filenames truncated to 255 bytes."
msgstr "不能读 inodes"

#: disk-utils/mkfs.cramfs.c:893
msgid "warning: files were skipped due to errors."
msgstr ""

#: disk-utils/mkfs.cramfs.c:895
#, c-format
msgid "warning: file sizes truncated to %luMB (minus 1 byte)."
msgstr ""

#: disk-utils/mkfs.cramfs.c:899
#, c-format
msgid "warning: uids truncated to %u bits.  (This may be a security concern.)"
msgstr ""

#: disk-utils/mkfs.cramfs.c:902
#, c-format
msgid "warning: gids truncated to %u bits.  (This may be a security concern.)"
msgstr ""

#: disk-utils/mkfs.cramfs.c:905
#, c-format
msgid ""
"WARNING: device numbers truncated to %u bits.  This almost certainly means\n"
"that some device files will be wrong."
msgstr ""

#: disk-utils/mkfs.minix.c:149
#, c-format
msgid "Usage: %s [-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
msgstr ""

#: disk-utils/mkfs.minix.c:171
#, c-format
msgid "%s is mounted; will not make a filesystem here!"
msgstr ""

#: disk-utils/mkfs.minix.c:195
#, fuzzy, c-format
msgid "%s: seek to boot block failed  in write_tables"
msgstr "在 write_block 中查找失败"

#: disk-utils/mkfs.minix.c:198
#, fuzzy, c-format
msgid "%s: unable to clear boot sector"
msgstr "不能读超级块"

#: disk-utils/mkfs.minix.c:200
#, fuzzy, c-format
msgid "%s: seek failed in write_tables"
msgstr "在 write_block 中查找失败"

#: disk-utils/mkfs.minix.c:203
#, fuzzy, c-format
msgid "%s: unable to write super-block"
msgstr "不能写超级块"

#: disk-utils/mkfs.minix.c:206
#, fuzzy, c-format
msgid "%s: unable to write inode map"
msgstr "不能写 inode map"

#: disk-utils/mkfs.minix.c:209
#, fuzzy, c-format
msgid "%s: unable to write zone map"
msgstr "不能写 zone map"

#: disk-utils/mkfs.minix.c:212
#, fuzzy, c-format
msgid "%s: unable to write inodes"
msgstr "不能写 inodes"

#: disk-utils/mkfs.minix.c:217
#, fuzzy, c-format
msgid "%s: seek failed in write_block"
msgstr "在 write_block 中查找失败"

#: disk-utils/mkfs.minix.c:220
#, fuzzy, c-format
msgid "%s: write failed in write_block"
msgstr "在 write_block 中查找失败"

#: disk-utils/mkfs.minix.c:229 disk-utils/mkfs.minix.c:304
#: disk-utils/mkfs.minix.c:353
#, fuzzy, c-format
msgid "%s: too many bad blocks"
msgstr "%s:不是一个块设备\n"

#: disk-utils/mkfs.minix.c:237
#, c-format
msgid "%s: not enough good blocks"
msgstr ""

#: disk-utils/mkfs.minix.c:482
#, fuzzy, c-format
msgid "%s: unable to alloc buffer for superblock"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/mkfs.minix.c:526
#, fuzzy, c-format
msgid "%s: unable to allocate buffers for maps"
msgstr "不能为 zone map 分配缓冲区"

#: disk-utils/mkfs.minix.c:536
#, fuzzy, c-format
msgid "%s: unable to allocate buffer for inodes"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/mkfs.minix.c:539
#, fuzzy, c-format
msgid "%lu inodes\n"
msgstr "%ld inodes\n"

#: disk-utils/mkfs.minix.c:540
#, fuzzy, c-format
msgid "%lu blocks\n"
msgstr "%ld 块\n"

#: disk-utils/mkfs.minix.c:543
#, c-format
msgid ""
"Maxsize=%ld\n"
"\n"
msgstr ""

#: disk-utils/mkfs.minix.c:556
#, fuzzy, c-format
msgid "%s: seek failed during testing of blocks"
msgstr "在 write_block 中查找失败"

#: disk-utils/mkfs.minix.c:563
#, c-format
msgid "Weird values in do_check: probably bugs\n"
msgstr ""

#: disk-utils/mkfs.minix.c:596
#, fuzzy, c-format
msgid "%s: seek failed in check_blocks"
msgstr "在 write_block 中查找失败"

#: disk-utils/mkfs.minix.c:606
#, c-format
msgid "%s: bad blocks before data-area: cannot make fs"
msgstr ""

#: disk-utils/mkfs.minix.c:613 disk-utils/mkfs.minix.c:639
#, c-format
msgid "%d bad blocks\n"
msgstr ""

#: disk-utils/mkfs.minix.c:615 disk-utils/mkfs.minix.c:641
#, c-format
msgid "one bad block\n"
msgstr ""

#: disk-utils/mkfs.minix.c:624
#, fuzzy, c-format
msgid "%s: can't open file of bad blocks"
msgstr "%s: 不能打开 %s\n"

#: disk-utils/mkfs.minix.c:629
#, c-format
msgid "badblock number input error on line %d\n"
msgstr ""

#: disk-utils/mkfs.minix.c:630
#, fuzzy, c-format
msgid "%s: cannot read badblocks file"
msgstr "%s: 不能打开 %s\n"

#: disk-utils/mkfs.minix.c:667 disk-utils/mkfs.minix.c:669
#, fuzzy, c-format
msgid "%s: bad inode size"
msgstr "%s: 不正确的目录: 大小 < 32"

#: disk-utils/mkfs.minix.c:718
#, c-format
msgid "strtol error: number of blocks not specified"
msgstr ""

#: disk-utils/mkfs.minix.c:737 mount/swapon.c:423 partx/partx.c:758
#: sys-utils/fstrim.c:135
#, fuzzy, c-format
msgid "%s: stat failed"
msgstr "%s 失败.\n"

#: disk-utils/mkfs.minix.c:744 login-utils/last.c:240 login-utils/vipw.c:154
#: misc-utils/findmnt.c:687 misc-utils/wipefs.c:260 mount/swapon.c:221
#: mount/swapon.c:306 mount/swapon.c:454 mount/swapon.c:620 mount/swapon.c:825
#: partx/partx.c:806 sys-utils/fallocate.c:138 sys-utils/fsfreeze.c:102
#: sys-utils/fstrim.c:141 text-utils/rev.c:129 text-utils/ul.c:229
#, fuzzy, c-format
msgid "%s: open failed"
msgstr "%s 失败.\n"

#: disk-utils/mkfs.minix.c:753
#, c-format
msgid "%s: device is misaligned"
msgstr ""

#: disk-utils/mkfs.minix.c:756
#, c-format
msgid "block size smaller than physical sector size of %s"
msgstr ""

#: disk-utils/mkfs.minix.c:760
#, c-format
msgid "cannot determine size of %s"
msgstr ""

#: disk-utils/mkfs.minix.c:769
#, c-format
msgid "will not try to make filesystem on '%s'"
msgstr ""

#: disk-utils/mkfs.minix.c:771
#, c-format
msgid "%s: number of blocks too small"
msgstr ""

#: disk-utils/mkswap.c:160
#, c-format
msgid "Bad user-specified page size %lu"
msgstr ""

#: disk-utils/mkswap.c:166
#, c-format
msgid "Using user-specified page size %d, instead of the system value %d"
msgstr ""

#: disk-utils/mkswap.c:189
msgid "Bad swap header size, no label written."
msgstr ""

#: disk-utils/mkswap.c:199
msgid "Label was truncated."
msgstr ""

#: disk-utils/mkswap.c:205
#, c-format
msgid "no label, "
msgstr ""

#: disk-utils/mkswap.c:213
#, c-format
msgid "no uuid\n"
msgstr ""

#: disk-utils/mkswap.c:278
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options] device [size]\n"
msgstr "用法: %s [ -n ] device\n"

#: disk-utils/mkswap.c:283
#, c-format
msgid ""
"\n"
"Options:\n"
" -c, --check               check bad blocks before creating the swap area\n"
" -f, --force               allow swap size area be larger than device\n"
" -p, --pagesize SIZE       specify page size in bytes\n"
" -L, --label LABEL         specify label\n"
" -v, --swapversion NUM     specify swap-space version number\n"
" -U, --uuid UUID           specify the uuid to use\n"
" -V, --version             output version information and exit\n"
" -h, --help                display this help and exit\n"
"\n"
msgstr ""

#: disk-utils/mkswap.c:302
msgid "too many bad pages"
msgstr ""

#: disk-utils/mkswap.c:319
msgid "seek failed in check_blocks"
msgstr ""

#: disk-utils/mkswap.c:325
#, c-format
msgid "one bad page\n"
msgstr ""

#: disk-utils/mkswap.c:327
#, c-format
msgid "%lu bad pages\n"
msgstr ""

#: disk-utils/mkswap.c:382 disk-utils/mkswap.c:419 disk-utils/mkswap.c:627
msgid "unable to rewind swap-device"
msgstr ""

#: disk-utils/mkswap.c:393
#, fuzzy
msgid "unable to alloc new libblkid probe"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/mkswap.c:395
#, fuzzy
msgid "unable to assign device to libblkid probe"
msgstr "不能为 inodes 分配缓冲区"

#: disk-utils/mkswap.c:423
#, fuzzy
msgid "unable to erase bootbits sectors"
msgstr "不能读超级块"

#: disk-utils/mkswap.c:427
#, fuzzy, c-format
msgid "%s: warning: don't erase bootbits sectors"
msgstr "不能读超级块"

#: disk-utils/mkswap.c:430
#, c-format
msgid "        (%s partition table detected). "
msgstr ""

#: disk-utils/mkswap.c:432
#, c-format
msgid "        on whole disk. "
msgstr ""

#: disk-utils/mkswap.c:434
#, c-format
msgid "        (compiled without libblkid). "
msgstr ""

#: disk-utils/mkswap.c:481
#, fuzzy
msgid "parse page size failed"
msgstr "查找失败"

#: disk-utils/mkswap.c:487
#, fuzzy
msgid "parse version number failed"
msgstr "查找失败"

#: disk-utils/mkswap.c:493
#, c-format
msgid "warning: ignore -U (UUIDs are unsupported by %s)"
msgstr ""

#: disk-utils/mkswap.c:518
#, c-format
msgid "does not support swapspace version %lu."
msgstr ""

#: disk-utils/mkswap.c:524
msgid "error: UUID parsing failed"
msgstr ""

#: disk-utils/mkswap.c:533
msgid "error: Nowhere to set up swap on?"
msgstr ""

#: disk-utils/mkswap.c:551
#, c-format
msgid "error: size %llu KiB is larger than device size %llu KiB"
msgstr ""

#: disk-utils/mkswap.c:557
#, c-format
msgid "error: swap area needs to be at least %ld KiB"
msgstr ""

#: disk-utils/mkswap.c:573
#, c-format
msgid "warning: truncating swap area to %llu KiB"
msgstr ""

#: disk-utils/mkswap.c:595
#, c-format
msgid "error: will not try to make swapdevice on '%s'"
msgstr ""

#: disk-utils/mkswap.c:599
#, c-format
msgid "error: %s is mounted; will not make swapspace."
msgstr ""

#: disk-utils/mkswap.c:603
#, c-format
msgid "warning: %s is misaligned"
msgstr ""

#: disk-utils/mkswap.c:616
msgid "Unable to set up swap-space: unreadable"
msgstr ""

#: disk-utils/mkswap.c:619
#, c-format
msgid "Setting up swapspace version 1, size = %llu KiB\n"
msgstr ""

#: disk-utils/mkswap.c:631
#, fuzzy, c-format
msgid "%s: unable to write signature page"
msgstr "不能写 inode map"

#: disk-utils/mkswap.c:640
msgid "fsync failed"
msgstr ""

#: disk-utils/mkswap.c:652
#, fuzzy, c-format
msgid "%s: unable to obtain selinux file label"
msgstr "%s:不是一个块设备\n"

#: disk-utils/mkswap.c:655
msgid "unable to matchpathcon()"
msgstr ""

#: disk-utils/mkswap.c:658
msgid "unable to create new selinux context"
msgstr ""

#: disk-utils/mkswap.c:660
msgid "couldn't compute selinux context"
msgstr ""

#: disk-utils/mkswap.c:666
#, fuzzy, c-format
msgid "unable to relabel %s to %s"
msgstr "不能读 inodes"

#: disk-utils/raw.c:50
#, c-format
msgid ""
"Usage:\n"
"  %1$s %2$srawN <major> <minor>\n"
"  %1$s %2$srawN /dev/<blockdevice>\n"
"  %1$s -q %2$srawN\n"
"  %1$s -qa\n"
msgstr ""

#: disk-utils/raw.c:125
#, c-format
msgid ""
"Device '%s' is the control raw device (use raw<N> where <N> is greater than "
"zero)\n"
msgstr ""

#: disk-utils/raw.c:145
#, fuzzy, c-format
msgid "Cannot locate block device '%s' (%s)\n"
msgstr "%s:不是一个块设备\n"

#: disk-utils/raw.c:151
#, fuzzy, c-format
msgid "Device '%s' is not a block device\n"
msgstr "%s:不是一个块设备\n"

#: disk-utils/raw.c:186
#, fuzzy, c-format
msgid "Cannot open master raw device '%s' (%s)\n"
msgstr "%s:不是一个块设备\n"

#: disk-utils/raw.c:204
#, c-format
msgid "Cannot locate raw device '%s' (%s)\n"
msgstr ""

#: disk-utils/raw.c:210
#, c-format
msgid "Raw device '%s' is not a character dev\n"
msgstr ""

#: disk-utils/raw.c:215
#, c-format
msgid "Device '%s' is not a raw dev\n"
msgstr ""

#: disk-utils/raw.c:230
#, c-format
msgid "Error querying raw device (%s)\n"
msgstr ""

#: disk-utils/raw.c:240 disk-utils/raw.c:260
#, c-format
msgid "%sraw%d:  bound to major %d, minor %d\n"
msgstr ""

#: disk-utils/raw.c:256
#, c-format
msgid "Error setting raw device (%s)\n"
msgstr ""

#: disk-utils/swaplabel.c:49 disk-utils/swaplabel.c:62
#, fuzzy, c-format
msgid "%s: unable to probe device"
msgstr "%s:不是一个块设备\n"

#: disk-utils/swaplabel.c:64
#, c-format
msgid "%s: ambivalent probing result, use wipefs(8)"
msgstr ""

#: disk-utils/swaplabel.c:66
#, c-format
msgid "%s: not a valid swap partition"
msgstr ""

#: disk-utils/swaplabel.c:72
#, c-format
msgid "%s: unsupported swap version '%s'"
msgstr ""

#: disk-utils/swaplabel.c:103
#, fuzzy, c-format
msgid "%s: failed to open"
msgstr "不能读 inodes"

#: disk-utils/swaplabel.c:112
#, fuzzy, c-format
msgid "failed to parse UUID: %s"
msgstr "不能读 inodes"

#: disk-utils/swaplabel.c:116
#, c-format
msgid "%s: failed to seek to swap UUID"
msgstr ""

#: disk-utils/swaplabel.c:120
#, fuzzy, c-format
msgid "%s: failed to write UUID"
msgstr "不能读 inodes"

#: disk-utils/swaplabel.c:131
#, c-format
msgid "%s: failed to seek to swap label "
msgstr ""

#: disk-utils/swaplabel.c:138
#, c-format
msgid "label is too long. Truncating it to '%s'"
msgstr ""

#: disk-utils/swaplabel.c:141
#, fuzzy, c-format
msgid "%s: failed to write label"
msgstr "在 write_block 中查找失败"

#: disk-utils/swaplabel.c:156
#, fuzzy, c-format
msgid ""
"Usage: %s [options] <device>\n"
"\n"
"Options:\n"
msgstr "用法: %s [ -n ] device\n"

#: disk-utils/swaplabel.c:160
#, c-format
msgid ""
" -h, --help          this help\n"
" -L, --label <label> specify a new label\n"
" -U, --uuid <uuid>   specify a new uuid\n"
msgstr ""

#: disk-utils/swaplabel.c:164
#, c-format
msgid ""
"\n"
"For more information see swaplabel(8).\n"
msgstr ""

#: disk-utils/swaplabel.c:198
msgid "ignore -U (UUIDs are unsupported)"
msgstr ""

#: fdisk/cfdisk.c:362
#, c-format
msgid "%s: Out of memory!\n"
msgstr ""

#: fdisk/cfdisk.c:387 fdisk/cfdisk.c:1900
msgid "Unusable"
msgstr ""

#: fdisk/cfdisk.c:389 fdisk/cfdisk.c:1902
msgid "Free Space"
msgstr ""

#: fdisk/cfdisk.c:404
#, c-format
msgid "Disk has been changed.\n"
msgstr ""

#: fdisk/cfdisk.c:406
#, c-format
msgid "Reboot the system to ensure the partition table is correctly updated.\n"
msgstr ""

#: fdisk/cfdisk.c:410
#, c-format
msgid ""
"\n"
"WARNING: If you have created or modified any\n"
"DOS 6.x partitions, please see the cfdisk manual\n"
"page for additional information.\n"
msgstr ""

#: fdisk/cfdisk.c:554
msgid "FATAL ERROR"
msgstr ""

#: fdisk/cfdisk.c:555
msgid "Press any key to exit cfdisk"
msgstr ""

#: fdisk/cfdisk.c:602 fdisk/cfdisk.c:610
msgid "Cannot seek on disk drive"
msgstr ""

#: fdisk/cfdisk.c:604
msgid "Cannot read disk drive"
msgstr ""

#: fdisk/cfdisk.c:612
msgid "Cannot write disk drive"
msgstr ""

#: fdisk/cfdisk.c:820
msgid "Too many partitions"
msgstr ""

#: fdisk/cfdisk.c:825
msgid "Partition begins before sector 0"
msgstr ""

#: fdisk/cfdisk.c:830
msgid "Partition ends before sector 0"
msgstr ""

#: fdisk/cfdisk.c:835
msgid "Partition begins after end-of-disk"
msgstr ""

#: fdisk/cfdisk.c:840
msgid "Partition ends after end-of-disk"
msgstr ""

#: fdisk/cfdisk.c:864
msgid "logical partitions not in disk order"
msgstr ""

#: fdisk/cfdisk.c:867
msgid "logical partitions overlap"
msgstr ""

#: fdisk/cfdisk.c:871
msgid "enlarged logical partitions overlap"
msgstr ""

#: fdisk/cfdisk.c:901
msgid ""
"!!!! Internal error creating logical drive with no extended partition !!!!"
msgstr ""

#: fdisk/cfdisk.c:912 fdisk/cfdisk.c:924
msgid ""
"Cannot create logical drive here -- would create two extended partitions"
msgstr ""

#: fdisk/cfdisk.c:1058
msgid "Menu item too long. Menu may look odd."
msgstr ""

#: fdisk/cfdisk.c:1173
msgid "Illegal key"
msgstr ""

#: fdisk/cfdisk.c:1198
msgid "Press a key to continue"
msgstr ""

#: fdisk/cfdisk.c:1245 fdisk/cfdisk.c:1871 fdisk/cfdisk.c:2403
#: fdisk/cfdisk.c:2405
msgid "Primary"
msgstr ""

#: fdisk/cfdisk.c:1245
msgid "Create a new primary partition"
msgstr ""

#: fdisk/cfdisk.c:1246 fdisk/cfdisk.c:1871 fdisk/cfdisk.c:2402
#: fdisk/cfdisk.c:2405
msgid "Logical"
msgstr ""

#: fdisk/cfdisk.c:1246
msgid "Create a new logical partition"
msgstr ""

#: fdisk/cfdisk.c:1247 fdisk/cfdisk.c:1302 fdisk/cfdisk.c:2076
msgid "Cancel"
msgstr ""

#: fdisk/cfdisk.c:1247 fdisk/cfdisk.c:1302
msgid "Don't create a partition"
msgstr ""

#: fdisk/cfdisk.c:1263
msgid "!!! Internal error !!!"
msgstr ""

#: fdisk/cfdisk.c:1266
msgid "Size (in MB): "
msgstr ""

#: fdisk/cfdisk.c:1300
msgid "Beginning"
msgstr ""

#: fdisk/cfdisk.c:1300
msgid "Add partition at beginning of free space"
msgstr ""

#: fdisk/cfdisk.c:1301
msgid "End"
msgstr ""

#: fdisk/cfdisk.c:1301
msgid "Add partition at end of free space"
msgstr ""

#: fdisk/cfdisk.c:1319
msgid "No room to create the extended partition"
msgstr ""

#: fdisk/cfdisk.c:1388
msgid "No partition table.\n"
msgstr ""

#: fdisk/cfdisk.c:1392
msgid "No partition table. Starting with zero table."
msgstr ""

#: fdisk/cfdisk.c:1402
msgid "Bad signature on partition table"
msgstr ""

#: fdisk/cfdisk.c:1406
msgid "Unknown partition table type"
msgstr ""

#: fdisk/cfdisk.c:1408
msgid "Do you wish to start with a zero table [y/N] ?"
msgstr ""

#: fdisk/cfdisk.c:1455
msgid "You specified more cylinders than fit on disk"
msgstr ""

#: fdisk/cfdisk.c:1491
msgid "Cannot open disk drive"
msgstr ""

#: fdisk/cfdisk.c:1493 fdisk/cfdisk.c:1682
msgid "Opened disk read-only - you have no permission to write"
msgstr ""

#: fdisk/cfdisk.c:1504
msgid ""
"Warning!!  Unsupported GPT (GUID Partition Table) detected. Use GNU Parted."
msgstr ""

#: fdisk/cfdisk.c:1523
msgid "Cannot get disk size"
msgstr ""

#: fdisk/cfdisk.c:1549
msgid "Bad primary partition"
msgstr ""

#: fdisk/cfdisk.c:1579
msgid "Bad logical partition"
msgstr ""

#: fdisk/cfdisk.c:1694
msgid "Warning!!  This may destroy data on your disk!"
msgstr ""

#: fdisk/cfdisk.c:1698
msgid ""
"Are you sure you want to write the partition table to disk? (yes or no): "
msgstr ""

#: fdisk/cfdisk.c:1704
msgid "no"
msgstr ""

#: fdisk/cfdisk.c:1706
msgid "Did not write partition table to disk"
msgstr ""

#: fdisk/cfdisk.c:1708
msgid "yes"
msgstr ""

#: fdisk/cfdisk.c:1712
msgid "Please enter `yes' or `no'"
msgstr ""

#: fdisk/cfdisk.c:1716
msgid "Writing partition table to disk..."
msgstr ""

#: fdisk/cfdisk.c:1741 fdisk/cfdisk.c:1745
msgid "Wrote partition table to disk"
msgstr ""

#: fdisk/cfdisk.c:1743
msgid ""
"Wrote partition table, but re-read table failed.  Run partprobe(8), kpartx"
"(8) or reboot to update table."
msgstr ""

#: fdisk/cfdisk.c:1753
msgid "No primary partitions are marked bootable. DOS MBR cannot boot this."
msgstr ""

#: fdisk/cfdisk.c:1755
msgid ""
"More than one primary partition is marked bootable. DOS MBR cannot boot this."
msgstr ""

#: fdisk/cfdisk.c:1813 fdisk/cfdisk.c:1932 fdisk/cfdisk.c:2016
msgid "Enter filename or press RETURN to display on screen: "
msgstr ""

#: fdisk/cfdisk.c:1822 fdisk/cfdisk.c:1940 fdisk/cfdisk.c:2024
#, c-format
msgid "Cannot open file '%s'"
msgstr ""

#: fdisk/cfdisk.c:1833
#, c-format
msgid "Disk Drive: %s\n"
msgstr ""

#: fdisk/cfdisk.c:1835
msgid "Sector 0:\n"
msgstr ""

#: fdisk/cfdisk.c:1842
#, c-format
msgid "Sector %d:\n"
msgstr ""

#: fdisk/cfdisk.c:1862
msgid "   None   "
msgstr ""

#: fdisk/cfdisk.c:1864
msgid "   Pri/Log"
msgstr ""

#: fdisk/cfdisk.c:1866
msgid "   Primary"
msgstr ""

#: fdisk/cfdisk.c:1868
msgid "   Logical"
msgstr ""

#: fdisk/cfdisk.c:1906 fdisk/fdisk.c:1800 fdisk/fdisk.c:2138
#: fdisk/fdisksgilabel.c:228 fdisk/fdisksunlabel.c:615 fdisk/sfdisk.c:645
msgid "Unknown"
msgstr ""

#: fdisk/cfdisk.c:1912 fdisk/cfdisk.c:2380 fdisk/fdisksunlabel.c:39
msgid "Boot"
msgstr ""

#: fdisk/cfdisk.c:1914
#, c-format
msgid "(%02X)"
msgstr ""

#: fdisk/cfdisk.c:1916
msgid "None"
msgstr ""

#: fdisk/cfdisk.c:1951 fdisk/cfdisk.c:2035
#, c-format
msgid "Partition Table for %s\n"
msgstr ""

#: fdisk/cfdisk.c:1953
msgid "               First       Last\n"
msgstr ""

#: fdisk/cfdisk.c:1954
msgid ""
" # Type       Sector      Sector   Offset    Length   Filesystem Type (ID) "
"Flag\n"
msgstr ""

#: fdisk/cfdisk.c:1955
msgid ""
"-- ------- ----------- ----------- ------ ----------- -------------------- "
"----\n"
msgstr ""

#: fdisk/cfdisk.c:2038
msgid "         ---Starting----      ----Ending-----    Start     Number of\n"
msgstr ""

#: fdisk/cfdisk.c:2039
msgid " # Flags Head Sect  Cyl   ID  Head Sect  Cyl     Sector    Sectors\n"
msgstr ""

#: fdisk/cfdisk.c:2040
msgid "-- ----- ---- ---- ----- ---- ---- ---- ----- ----------- -----------\n"
msgstr ""

#: fdisk/cfdisk.c:2073
msgid "Raw"
msgstr ""

#: fdisk/cfdisk.c:2073
msgid "Print the table using raw data format"
msgstr ""

#: fdisk/cfdisk.c:2074 fdisk/cfdisk.c:2177
msgid "Sectors"
msgstr ""

#: fdisk/cfdisk.c:2074
msgid "Print the table ordered by sectors"
msgstr ""

#: fdisk/cfdisk.c:2075
msgid "Table"
msgstr ""

#: fdisk/cfdisk.c:2075
msgid "Just print the partition table"
msgstr ""

#: fdisk/cfdisk.c:2076
msgid "Don't print the table"
msgstr ""

#: fdisk/cfdisk.c:2104
msgid "Help Screen for cfdisk"
msgstr ""

#: fdisk/cfdisk.c:2106
msgid "This is cfdisk, a curses based disk partitioning program, which"
msgstr ""

#: fdisk/cfdisk.c:2107
msgid "allows you to create, delete and modify partitions on your hard"
msgstr ""

#: fdisk/cfdisk.c:2108
msgid "disk drive."
msgstr ""

#: fdisk/cfdisk.c:2110
msgid "Copyright (C) 1994-1999 Kevin E. Martin & aeb"
msgstr ""

#: fdisk/cfdisk.c:2112
msgid "Command      Meaning"
msgstr ""

#: fdisk/cfdisk.c:2113
msgid "-------      -------"
msgstr ""

#: fdisk/cfdisk.c:2114
msgid "  b          Toggle bootable flag of the current partition"
msgstr ""

#: fdisk/cfdisk.c:2115
msgid "  d          Delete the current partition"
msgstr ""

#: fdisk/cfdisk.c:2116
msgid "  g          Change cylinders, heads, sectors-per-track parameters"
msgstr ""

#: fdisk/cfdisk.c:2117
msgid "             WARNING: This option should only be used by people who"
msgstr ""

#: fdisk/cfdisk.c:2118
msgid "             know what they are doing."
msgstr ""

#: fdisk/cfdisk.c:2119
msgid "  h          Print this screen"
msgstr ""

#: fdisk/cfdisk.c:2120
msgid "  m          Maximize disk usage of the current partition"
msgstr ""

#: fdisk/cfdisk.c:2121
msgid "             Note: This may make the partition incompatible with"
msgstr ""

#: fdisk/cfdisk.c:2122
msgid "             DOS, OS/2, ..."
msgstr ""

#: fdisk/cfdisk.c:2123
msgid "  n          Create new partition from free space"
msgstr ""

#: fdisk/cfdisk.c:2124
msgid "  p          Print partition table to the screen or to a file"
msgstr ""

#: fdisk/cfdisk.c:2125
msgid "             There are several different formats for the partition"
msgstr ""

#: fdisk/cfdisk.c:2126
msgid "             that you can choose from:"
msgstr ""

#: fdisk/cfdisk.c:2127
msgid "                r - Raw data (exactly what would be written to disk)"
msgstr ""

#: fdisk/cfdisk.c:2128
msgid "                s - Table ordered by sectors"
msgstr ""

#: fdisk/cfdisk.c:2129
msgid "                t - Table in raw format"
msgstr ""

#: fdisk/cfdisk.c:2130
msgid "  q          Quit program without writing partition table"
msgstr ""

#: fdisk/cfdisk.c:2131
msgid "  t          Change the filesystem type"
msgstr ""

#: fdisk/cfdisk.c:2132
msgid "  u          Change units of the partition size display"
msgstr ""

#: fdisk/cfdisk.c:2133
msgid "             Rotates through MB, sectors and cylinders"
msgstr ""

#: fdisk/cfdisk.c:2134
msgid "  W          Write partition table to disk (must enter upper case W)"
msgstr ""

#: fdisk/cfdisk.c:2135
msgid "             Since this might destroy data on the disk, you must"
msgstr ""

#: fdisk/cfdisk.c:2136
msgid "             either confirm or deny the write by entering `yes' or"
msgstr ""

#: fdisk/cfdisk.c:2137
msgid "             `no'"
msgstr ""

#: fdisk/cfdisk.c:2138
msgid "Up Arrow     Move cursor to the previous partition"
msgstr ""

#: fdisk/cfdisk.c:2139
msgid "Down Arrow   Move cursor to the next partition"
msgstr ""

#: fdisk/cfdisk.c:2140
msgid "CTRL-L       Redraws the screen"
msgstr ""

#: fdisk/cfdisk.c:2141
msgid "  ?          Print this screen"
msgstr ""

#: fdisk/cfdisk.c:2143
msgid "Note: All of the commands can be entered with either upper or lower"
msgstr ""

#: fdisk/cfdisk.c:2144
msgid "case letters (except for Writes)."
msgstr ""

#: fdisk/cfdisk.c:2175 fdisk/fdisksunlabel.c:230
msgid "Cylinders"
msgstr ""

#: fdisk/cfdisk.c:2175
msgid "Change cylinder geometry"
msgstr ""

#: fdisk/cfdisk.c:2176 fdisk/fdisksunlabel.c:228
msgid "Heads"
msgstr ""

#: fdisk/cfdisk.c:2176
msgid "Change head geometry"
msgstr ""

#: fdisk/cfdisk.c:2177
msgid "Change sector geometry"
msgstr ""

#: fdisk/cfdisk.c:2178
msgid "Done"
msgstr ""

#: fdisk/cfdisk.c:2178
msgid "Done with changing geometry"
msgstr ""

#: fdisk/cfdisk.c:2191
msgid "Enter the number of cylinders: "
msgstr ""

#: fdisk/cfdisk.c:2202 fdisk/cfdisk.c:2779
msgid "Illegal cylinders value"
msgstr ""

#: fdisk/cfdisk.c:2208
msgid "Enter the number of heads: "
msgstr ""

#: fdisk/cfdisk.c:2215 fdisk/cfdisk.c:2789
msgid "Illegal heads value"
msgstr ""

#: fdisk/cfdisk.c:2221
msgid "Enter the number of sectors per track: "
msgstr ""

#: fdisk/cfdisk.c:2228 fdisk/cfdisk.c:2796
msgid "Illegal sectors value"
msgstr ""

#: fdisk/cfdisk.c:2331
msgid "Enter filesystem type: "
msgstr ""

#: fdisk/cfdisk.c:2349
msgid "Cannot change FS Type to empty"
msgstr ""

#: fdisk/cfdisk.c:2351
msgid "Cannot change FS Type to extended"
msgstr ""

#: fdisk/cfdisk.c:2382
#, c-format
msgid "Unk(%02X)"
msgstr ""

#: fdisk/cfdisk.c:2385 fdisk/cfdisk.c:2388
msgid ", NC"
msgstr ""

#: fdisk/cfdisk.c:2393 fdisk/cfdisk.c:2396
msgid "NC"
msgstr ""

#: fdisk/cfdisk.c:2404
msgid "Pri/Log"
msgstr ""

#: fdisk/cfdisk.c:2411
#, c-format
msgid "Unknown (%02X)"
msgstr ""

#: fdisk/cfdisk.c:2480
#, c-format
msgid "Disk Drive: %s"
msgstr ""

#: fdisk/cfdisk.c:2487
#, c-format
msgid "Size: %lld bytes, %lld MB"
msgstr ""

#: fdisk/cfdisk.c:2490
#, c-format
msgid "Size: %lld bytes, %lld.%lld GB"
msgstr ""

#: fdisk/cfdisk.c:2494
#, c-format
msgid "Heads: %d   Sectors per Track: %d   Cylinders: %lld"
msgstr ""

#: fdisk/cfdisk.c:2498 login-utils/chfn.c:358
msgid "Name"
msgstr ""

#: fdisk/cfdisk.c:2499
msgid "Flags"
msgstr ""

#: fdisk/cfdisk.c:2500
msgid "Part Type"
msgstr ""

#: fdisk/cfdisk.c:2501
msgid "FS Type"
msgstr ""

#: fdisk/cfdisk.c:2502
msgid "[Label]"
msgstr ""

#: fdisk/cfdisk.c:2504
msgid "    Sectors"
msgstr ""

#: fdisk/cfdisk.c:2506
msgid "  Cylinders"
msgstr ""

#: fdisk/cfdisk.c:2508
msgid "  Size (MB)"
msgstr ""

#: fdisk/cfdisk.c:2510
msgid "  Size (GB)"
msgstr ""

#: fdisk/cfdisk.c:2532
msgid "No more partitions"
msgstr ""

#: fdisk/cfdisk.c:2565
msgid "Bootable"
msgstr ""

#: fdisk/cfdisk.c:2565
msgid "Toggle bootable flag of the current partition"
msgstr ""

#: fdisk/cfdisk.c:2566
msgid "Delete"
msgstr ""

#: fdisk/cfdisk.c:2566
msgid "Delete the current partition"
msgstr ""

#: fdisk/cfdisk.c:2567
msgid "Geometry"
msgstr ""

#: fdisk/cfdisk.c:2567
msgid "Change disk geometry (experts only)"
msgstr ""

#: fdisk/cfdisk.c:2568
msgid "Help"
msgstr ""

#: fdisk/cfdisk.c:2568
msgid "Print help screen"
msgstr ""

#: fdisk/cfdisk.c:2569
msgid "Maximize"
msgstr ""

#: fdisk/cfdisk.c:2569
msgid "Maximize disk usage of the current partition (experts only)"
msgstr ""

#: fdisk/cfdisk.c:2570
msgid "New"
msgstr ""

#: fdisk/cfdisk.c:2570
msgid "Create new partition from free space"
msgstr ""

#: fdisk/cfdisk.c:2571
msgid "Print"
msgstr ""

#: fdisk/cfdisk.c:2571
msgid "Print partition table to the screen or to a file"
msgstr ""

#: fdisk/cfdisk.c:2572
msgid "Quit"
msgstr ""

#: fdisk/cfdisk.c:2572
msgid "Quit program without writing partition table"
msgstr ""

#: fdisk/cfdisk.c:2573
msgid "Type"
msgstr ""

#: fdisk/cfdisk.c:2573
msgid "Change the filesystem type (DOS, Linux, OS/2 and so on)"
msgstr ""

#: fdisk/cfdisk.c:2574
msgid "Units"
msgstr ""

#: fdisk/cfdisk.c:2574
msgid "Change units of the partition size display (MB, sect, cyl)"
msgstr ""

#: fdisk/cfdisk.c:2575
msgid "Write"
msgstr ""

#: fdisk/cfdisk.c:2575
msgid "Write partition table to disk (this might destroy data)"
msgstr ""

#: fdisk/cfdisk.c:2622
msgid "Cannot make this partition bootable"
msgstr ""

#: fdisk/cfdisk.c:2632
msgid "Cannot delete an empty partition"
msgstr ""

#: fdisk/cfdisk.c:2652 fdisk/cfdisk.c:2654
msgid "Cannot maximize this partition"
msgstr ""

#: fdisk/cfdisk.c:2662
msgid "This partition is unusable"
msgstr ""

#: fdisk/cfdisk.c:2664
msgid "This partition is already in use"
msgstr ""

#: fdisk/cfdisk.c:2681
msgid "Cannot change the type of an empty partition"
msgstr ""

#: fdisk/cfdisk.c:2725
msgid "Illegal command"
msgstr ""

#: fdisk/cfdisk.c:2735
#, c-format
msgid "Copyright (C) 1994-2002 Kevin E. Martin & aeb\n"
msgstr ""

#: fdisk/cfdisk.c:2742
#, c-format
msgid ""
"\n"
"Usage:\n"
"Print version:\n"
"        %s -v\n"
"Print partition table:\n"
"        %s -P {r|s|t} [options] device\n"
"Interactive use:\n"
"        %s [options] device\n"
"\n"
"Options:\n"
"-a: Use arrow instead of highlighting;\n"
"-z: Start with a zero partition table, instead of reading the pt from disk;\n"
"-c C -h H -s S: Override the kernel's idea of the number of cylinders,\n"
"                the number of heads and the number of sectors/track.\n"
"\n"
msgstr ""

#: fdisk/fdiskaixlabel.c:27
msgid ""
"\n"
"\tThere is a valid AIX label on this disk.\n"
"\tUnfortunately Linux cannot handle these\n"
"\tdisks at the moment.  Nevertheless some\n"
"\tadvice:\n"
"\t1. fdisk will destroy its contents on write.\n"
"\t2. Be sure that this disk is NOT a still vital\n"
"\t   part of a volume group. (Otherwise you may\n"
"\t   erase the other disks as well, if unmirrored.)\n"
"\t3. Before deleting this physical volume be sure\n"
"\t   to remove the disk logically from your AIX\n"
"\t   machine.  (Otherwise you become an AIXpert)."
msgstr ""

#: fdisk/fdiskbsdlabel.c:121
#, c-format
msgid ""
"\n"
"BSD label for device: %s\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:128 fdisk/fdisk.c:379 fdisk/fdisk.c:398
#: fdisk/fdisk.c:416 fdisk/fdisk.c:423 fdisk/fdisk.c:446 fdisk/fdisk.c:464
#: fdisk/fdisk.c:480 fdisk/fdisk.c:496
msgid "Command action"
msgstr ""

#: fdisk/fdiskbsdlabel.c:129
msgid "   d   delete a BSD partition"
msgstr ""

#: fdisk/fdiskbsdlabel.c:130
msgid "   e   edit drive data"
msgstr ""

#: fdisk/fdiskbsdlabel.c:131
msgid "   i   install bootstrap"
msgstr ""

#: fdisk/fdiskbsdlabel.c:132
msgid "   l   list known filesystem types"
msgstr ""

#: fdisk/fdiskbsdlabel.c:133 fdisk/fdisk.c:385 fdisk/fdisk.c:404
#: fdisk/fdisk.c:417 fdisk/fdisk.c:429 fdisk/fdisk.c:454 fdisk/fdisk.c:471
#: fdisk/fdisk.c:487 fdisk/fdisk.c:505
msgid "   m   print this menu"
msgstr ""

#: fdisk/fdiskbsdlabel.c:134
msgid "   n   add a new BSD partition"
msgstr ""

#: fdisk/fdiskbsdlabel.c:135
msgid "   p   print BSD partition table"
msgstr ""

#: fdisk/fdiskbsdlabel.c:136 fdisk/fdisk.c:389 fdisk/fdisk.c:408
#: fdisk/fdisk.c:419 fdisk/fdisk.c:433 fdisk/fdisk.c:456 fdisk/fdisk.c:473
#: fdisk/fdisk.c:489 fdisk/fdisk.c:507
msgid "   q   quit without saving changes"
msgstr ""

#: fdisk/fdiskbsdlabel.c:137 fdisk/fdisk.c:457 fdisk/fdisk.c:474
#: fdisk/fdisk.c:490 fdisk/fdisk.c:508
msgid "   r   return to main menu"
msgstr ""

#: fdisk/fdiskbsdlabel.c:138
msgid "   s   show complete disklabel"
msgstr ""

#: fdisk/fdiskbsdlabel.c:139
msgid "   t   change a partition's filesystem id"
msgstr ""

#: fdisk/fdiskbsdlabel.c:140
msgid "   u   change units (cylinders/sectors)"
msgstr ""

#: fdisk/fdiskbsdlabel.c:141
msgid "   w   write disklabel to disk"
msgstr ""

#: fdisk/fdiskbsdlabel.c:143
msgid "   x   link BSD partition to non-BSD partition"
msgstr ""

#: fdisk/fdiskbsdlabel.c:175
#, c-format
msgid "Partition %s has invalid starting sector 0.\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:179
#, c-format
msgid "Reading disklabel of %s at sector %d.\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:189
#, c-format
msgid "There is no *BSD partition on %s.\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:203
msgid "BSD disklabel command (m for help): "
msgstr ""

#: fdisk/fdiskbsdlabel.c:283 fdisk/fdisk.c:2360 fdisk/fdisksgilabel.c:642
#: fdisk/fdisksunlabel.c:425
#, c-format
msgid "First %s"
msgstr ""

#: fdisk/fdiskbsdlabel.c:290 fdisk/fdisksunlabel.c:482
#, c-format
msgid "Last %s or +size or +sizeM or +sizeK"
msgstr ""

#: fdisk/fdiskbsdlabel.c:317
#, c-format
msgid "type: %s\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:319
#, c-format
msgid "type: %d\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:320
#, c-format
msgid "disk: %.*s\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:321
#, c-format
msgid "label: %.*s\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:322
#, c-format
msgid "flags:"
msgstr ""

#: fdisk/fdiskbsdlabel.c:324
#, c-format
msgid " removable"
msgstr ""

#: fdisk/fdiskbsdlabel.c:326
#, c-format
msgid " ecc"
msgstr ""

#: fdisk/fdiskbsdlabel.c:328
#, c-format
msgid " badsect"
msgstr ""

#: fdisk/fdiskbsdlabel.c:332
#, c-format
msgid "bytes/sector: %ld\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:333
#, c-format
msgid "sectors/track: %ld\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:334
#, c-format
msgid "tracks/cylinder: %ld\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:335
#, c-format
msgid "sectors/cylinder: %ld\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:336
#, c-format
msgid "cylinders: %ld\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:337
#, c-format
msgid "rpm: %d\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:338
#, c-format
msgid "interleave: %d\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:339
#, c-format
msgid "trackskew: %d\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:340
#, c-format
msgid "cylinderskew: %d\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:341
#, c-format
msgid "headswitch: %ld\t\t# milliseconds\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:343
#, c-format
msgid "track-to-track seek: %ld\t# milliseconds\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:345
#, c-format
msgid "drivedata: "
msgstr ""

#: fdisk/fdiskbsdlabel.c:354
#, c-format
msgid ""
"\n"
"%d partitions:\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:355
#, c-format
msgid "#       start       end      size     fstype   [fsize bsize   cpg]\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:404 fdisk/fdiskbsdlabel.c:407
#, c-format
msgid "Writing disklabel to %s.\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:419 fdisk/fdiskbsdlabel.c:421
#, c-format
msgid "%s contains no disklabel.\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:426
msgid "Do you want to create a disklabel? (y/n) "
msgstr ""

#: fdisk/fdiskbsdlabel.c:466
msgid "bytes/sector"
msgstr ""

#: fdisk/fdiskbsdlabel.c:467
msgid "sectors/track"
msgstr ""

#: fdisk/fdiskbsdlabel.c:468
msgid "tracks/cylinder"
msgstr ""

#: fdisk/fdiskbsdlabel.c:469 fdisk/fdisk.c:735 fdisk/fdisk.c:1622
#: fdisk/sfdisk.c:955
msgid "cylinders"
msgstr ""

#: fdisk/fdiskbsdlabel.c:476
msgid "sectors/cylinder"
msgstr ""

#: fdisk/fdiskbsdlabel.c:480
#, c-format
msgid "Must be <= sectors/track * tracks/cylinder (default).\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:482
msgid "rpm"
msgstr ""

#: fdisk/fdiskbsdlabel.c:483
msgid "interleave"
msgstr ""

#: fdisk/fdiskbsdlabel.c:484
msgid "trackskew"
msgstr ""

#: fdisk/fdiskbsdlabel.c:485
msgid "cylinderskew"
msgstr ""

#: fdisk/fdiskbsdlabel.c:486
msgid "headswitch"
msgstr ""

#: fdisk/fdiskbsdlabel.c:487
msgid "track-to-track seek"
msgstr ""

#: fdisk/fdiskbsdlabel.c:528
#, c-format
msgid "Bootstrap: %sboot -> boot%s (%s): "
msgstr ""

#: fdisk/fdiskbsdlabel.c:553
#, c-format
msgid "Bootstrap overlaps with disk label!\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:574 fdisk/fdiskbsdlabel.c:576
#, c-format
msgid "Bootstrap installed on %s.\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:598
#, c-format
msgid "Partition (a-%c): "
msgstr ""

#: fdisk/fdiskbsdlabel.c:617 fdisk/fdisk.c:2522
#, c-format
msgid "The maximum number of partitions has been created\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:629
#, c-format
msgid "This partition already exists.\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:757
#, c-format
msgid "Warning: too many partitions (%d, maximum is %d).\n"
msgstr ""

#: fdisk/fdiskbsdlabel.c:805
#, c-format
msgid ""
"\n"
"Syncing disks.\n"
msgstr ""

#: fdisk/fdisk.c:246
#, c-format
msgid ""
"Usage:\n"
" %1$s [options] <disk>    change partition table\n"
" %1$s [options] -l <disk> list partition table(s)\n"
" %1$s -s <partition>      give partition size(s) in blocks\n"
"\n"
"Options:\n"
" -b <size>             sector size (512, 1024, 2048 or 4096)\n"
" -c[=<mode>]           compatible mode: 'dos' or 'nondos' (default)\n"
" -h                    print this help text\n"
" -u[=<unit>]           display units: 'cylinders' or 'sectors' (default)\n"
" -v                    print program version\n"
" -C <number>           specify the number of cylinders\n"
" -H <number>           specify the number of heads\n"
" -S <number>           specify the number of sectors per track\n"
"\n"
msgstr ""

#: fdisk/fdisk.c:272
#, c-format
msgid "unable to open %s"
msgstr ""

#: fdisk/fdisk.c:275
#, fuzzy, c-format
msgid "unable to read %s"
msgstr "不能读 inodes"

#: fdisk/fdisk.c:278
#, fuzzy, c-format
msgid "unable to seek on %s"
msgstr "不能读 inodes"

#: fdisk/fdisk.c:281
#, fuzzy, c-format
msgid "unable to write %s"
msgstr "不能写 inodes"

#: fdisk/fdisk.c:284
#, c-format
msgid "BLKGETSIZE ioctl failed on %s"
msgstr ""

#: fdisk/fdisk.c:287
#, fuzzy
msgid "fatal error"
msgstr "内部错误"

#: fdisk/fdisk.c:380
msgid "   a   toggle a read only flag"
msgstr ""

#: fdisk/fdisk.c:381 fdisk/fdisk.c:425
msgid "   b   edit bsd disklabel"
msgstr ""

#: fdisk/fdisk.c:382
msgid "   c   toggle the mountable flag"
msgstr ""

#: fdisk/fdisk.c:383 fdisk/fdisk.c:402 fdisk/fdisk.c:427
msgid "   d   delete a partition"
msgstr ""

#: fdisk/fdisk.c:384 fdisk/fdisk.c:403 fdisk/fdisk.c:428
msgid "   l   list known partition types"
msgstr ""

#: fdisk/fdisk.c:386 fdisk/fdisk.c:405 fdisk/fdisk.c:430
msgid "   n   add a new partition"
msgstr ""

#: fdisk/fdisk.c:387 fdisk/fdisk.c:406 fdisk/fdisk.c:418 fdisk/fdisk.c:431
msgid "   o   create a new empty DOS partition table"
msgstr ""

#: fdisk/fdisk.c:388 fdisk/fdisk.c:407 fdisk/fdisk.c:432 fdisk/fdisk.c:455
#: fdisk/fdisk.c:472 fdisk/fdisk.c:488 fdisk/fdisk.c:506
msgid "   p   print the partition table"
msgstr ""

#: fdisk/fdisk.c:390 fdisk/fdisk.c:409 fdisk/fdisk.c:420 fdisk/fdisk.c:434
msgid "   s   create a new empty Sun disklabel"
msgstr ""

#: fdisk/fdisk.c:391 fdisk/fdisk.c:410 fdisk/fdisk.c:435
msgid "   t   change a partition's system id"
msgstr ""

#: fdisk/fdisk.c:392 fdisk/fdisk.c:411 fdisk/fdisk.c:436
msgid "   u   change display/entry units"
msgstr ""

#: fdisk/fdisk.c:393 fdisk/fdisk.c:412 fdisk/fdisk.c:437 fdisk/fdisk.c:459
#: fdisk/fdisk.c:476 fdisk/fdisk.c:492 fdisk/fdisk.c:510
msgid "   v   verify the partition table"
msgstr ""

#: fdisk/fdisk.c:394 fdisk/fdisk.c:413 fdisk/fdisk.c:438 fdisk/fdisk.c:460
#: fdisk/fdisk.c:477 fdisk/fdisk.c:493 fdisk/fdisk.c:511
msgid "   w   write table to disk and exit"
msgstr ""

#: fdisk/fdisk.c:395 fdisk/fdisk.c:439
msgid "   x   extra functionality (experts only)"
msgstr ""

#: fdisk/fdisk.c:399
msgid "   a   select bootable partition"
msgstr ""

#: fdisk/fdisk.c:400
msgid "   b   edit bootfile entry"
msgstr ""

#: fdisk/fdisk.c:401
msgid "   c   select sgi swap partition"
msgstr ""

#: fdisk/fdisk.c:424
msgid "   a   toggle a bootable flag"
msgstr ""

#: fdisk/fdisk.c:426
msgid "   c   toggle the dos compatibility flag"
msgstr ""

#: fdisk/fdisk.c:447
msgid "   a   change number of alternate cylinders"
msgstr ""

#: fdisk/fdisk.c:448 fdisk/fdisk.c:466 fdisk/fdisk.c:482 fdisk/fdisk.c:498
msgid "   c   change number of cylinders"
msgstr ""

#: fdisk/fdisk.c:449 fdisk/fdisk.c:467 fdisk/fdisk.c:483 fdisk/fdisk.c:499
msgid "   d   print the raw data in the partition table"
msgstr ""

#: fdisk/fdisk.c:450
msgid "   e   change number of extra sectors per cylinder"
msgstr ""

#: fdisk/fdisk.c:451 fdisk/fdisk.c:470 fdisk/fdisk.c:486 fdisk/fdisk.c:503
msgid "   h   change number of heads"
msgstr ""

#: fdisk/fdisk.c:452
msgid "   i   change interleave factor"
msgstr ""

#: fdisk/fdisk.c:453
msgid "   o   change rotation speed (rpm)"
msgstr ""

#: fdisk/fdisk.c:458 fdisk/fdisk.c:475 fdisk/fdisk.c:491 fdisk/fdisk.c:509
msgid "   s   change number of sectors/track"
msgstr ""

#: fdisk/fdisk.c:461
msgid "   y   change number of physical cylinders"
msgstr ""

#: fdisk/fdisk.c:465 fdisk/fdisk.c:481 fdisk/fdisk.c:497
msgid "   b   move beginning of data in a partition"
msgstr ""

#: fdisk/fdisk.c:468 fdisk/fdisk.c:484 fdisk/fdisk.c:500
msgid "   e   list extended partitions"
msgstr ""

#: fdisk/fdisk.c:469 fdisk/fdisk.c:485 fdisk/fdisk.c:502
msgid "   g   create an IRIX (SGI) partition table"
msgstr ""

#: fdisk/fdisk.c:501
msgid "   f   fix partition order"
msgstr ""

#: fdisk/fdisk.c:504
msgid "   i   change the disk identifier"
msgstr ""

#: fdisk/fdisk.c:630
#, c-format
msgid "You must set"
msgstr ""

#: fdisk/fdisk.c:731
msgid "heads"
msgstr ""

#: fdisk/fdisk.c:733 fdisk/fdisk.c:1622 fdisk/sfdisk.c:955
msgid "sectors"
msgstr ""

#: fdisk/fdisk.c:739
#, c-format
msgid ""
"%s%s.\n"
"You can do this from the extra functions menu.\n"
msgstr ""

#: fdisk/fdisk.c:740
msgid " and "
msgstr ""

#: fdisk/fdisk.c:761
#, c-format
msgid ""
"\n"
"WARNING: The size of this disk is %d.%d TB (%llu bytes).\n"
"DOS partition table format can not be used on drives for volumes\n"
"larger than (%llu bytes) for %d-byte sectors. Use parted(1) and GUID \n"
"partition table format (GPT).\n"
"\n"
msgstr ""

#: fdisk/fdisk.c:779
#, c-format
msgid ""
"\n"
"The device presents a logical sector size that is smaller than\n"
"the physical sector size. Aligning to a physical sector (or optimal\n"
"I/O) size boundary is recommended, or performance may be impacted.\n"
msgstr ""

#: fdisk/fdisk.c:785
#, c-format
msgid ""
"\n"
"WARNING: DOS-compatible mode is deprecated. It's strongly recommended to\n"
"         switch off the mode (with command 'c')."
msgstr ""

#: fdisk/fdisk.c:790
#, c-format
msgid ""
"\n"
"WARNING: cylinders as display units are deprecated. Use command 'u' to\n"
"         change units to sectors.\n"
msgstr ""

#: fdisk/fdisk.c:809
#, c-format
msgid "Bad offset in primary extended partition\n"
msgstr ""

#: fdisk/fdisk.c:823
#, c-format
msgid ""
"Warning: omitting partitions after #%d.\n"
"They will be deleted if you save this partition table.\n"
msgstr ""

#: fdisk/fdisk.c:842
#, c-format
msgid "Warning: extra link pointer in partition table %d\n"
msgstr ""

#: fdisk/fdisk.c:850
#, c-format
msgid "Warning: ignoring extra data in partition table %d\n"
msgstr ""

#: fdisk/fdisk.c:883
#, c-format
msgid "omitting empty partition (%d)\n"
msgstr ""

#: fdisk/fdisk.c:902
#, c-format
msgid "Disk identifier: 0x%08x\n"
msgstr ""

#: fdisk/fdisk.c:911
#, c-format
msgid "New disk identifier (current 0x%08x): "
msgstr ""

#: fdisk/fdisk.c:931
#, c-format
msgid ""
"Building a new DOS disklabel with disk identifier 0x%08x.\n"
"Changes will remain in memory only, until you decide to write them.\n"
"After that, of course, the previous content won't be recoverable.\n"
"\n"
msgstr ""

#: fdisk/fdisk.c:1008
#, c-format
msgid "Note: sector size is %d (not %d)\n"
msgstr ""

#: fdisk/fdisk.c:1203
#, c-format
msgid "You will not be able to write the partition table.\n"
msgstr ""

#: fdisk/fdisk.c:1236
#, c-format
msgid ""
"This disk has both DOS and BSD magic.\n"
"Give the 'b' command to go to BSD mode.\n"
msgstr ""

#: fdisk/fdisk.c:1246
#, c-format
msgid ""
"Device contains neither a valid DOS partition table, nor Sun, SGI or OSF "
"disklabel\n"
msgstr ""

#: fdisk/fdisk.c:1263
#, c-format
msgid "Internal error\n"
msgstr ""

#: fdisk/fdisk.c:1273
#, c-format
msgid "Ignoring extra extended partition %d\n"
msgstr ""

#: fdisk/fdisk.c:1285
#, c-format
msgid ""
"Warning: invalid flag 0x%04x of partition table %d will be corrected by w"
"(rite)\n"
msgstr ""

#: fdisk/fdisk.c:1318
#, fuzzy, c-format
msgid "Do you really want to quit? "
msgstr "你确认要继续"

#: fdisk/fdisk.c:1379
msgid "Hex code (type L to list codes): "
msgstr ""

#: fdisk/fdisk.c:1411
#, c-format
msgid "%s (%u-%u, default %u): "
msgstr ""

#: fdisk/fdisk.c:1481
#, c-format
msgid "Unsupported suffix: '%s'.\n"
msgstr ""

#: fdisk/fdisk.c:1482
#, c-format
msgid ""
"Supported: 10^N: KB (KiloByte), MB (MegaByte), GB (GigaByte)\n"
"            2^N: K  (KibiByte), M  (MebiByte), G  (GibiByte)\n"
msgstr ""

#: fdisk/fdisk.c:1510
#, c-format
msgid "Using default value %u\n"
msgstr ""

#: fdisk/fdisk.c:1514
#, c-format
msgid "Value out of range.\n"
msgstr ""

#: fdisk/fdisk.c:1539
msgid "Partition number"
msgstr ""

#: fdisk/fdisk.c:1550
#, c-format
msgid "Warning: partition %d has empty type\n"
msgstr ""

#: fdisk/fdisk.c:1578 fdisk/fdisk.c:1607
#, c-format
msgid "Selected partition %d\n"
msgstr ""

#: fdisk/fdisk.c:1581
#, c-format
msgid "No partition is defined yet!\n"
msgstr ""

#: fdisk/fdisk.c:1610
#, c-format
msgid "All primary partitions have been defined already!\n"
msgstr ""

#: fdisk/fdisk.c:1620
msgid "cylinder"
msgstr ""

#: fdisk/fdisk.c:1620
msgid "sector"
msgstr ""

#: fdisk/fdisk.c:1631
#, c-format
msgid "Changing display/entry units to cylinders (DEPRECATED!)\n"
msgstr ""

#: fdisk/fdisk.c:1633
#, c-format
msgid "Changing display/entry units to sectors\n"
msgstr ""

#: fdisk/fdisk.c:1643
#, c-format
msgid "WARNING: Partition %d is an extended partition\n"
msgstr ""

#: fdisk/fdisk.c:1653
#, c-format
msgid "DOS Compatibility flag is set (DEPRECATED!)\n"
msgstr ""

#: fdisk/fdisk.c:1655
#, c-format
msgid "DOS Compatibility flag is not set\n"
msgstr ""

#: fdisk/fdisk.c:1756
#, c-format
msgid "Partition %d does not exist yet!\n"
msgstr ""

#: fdisk/fdisk.c:1761
#, c-format
msgid ""
"Type 0 means free space to many systems\n"
"(but not to Linux). Having partitions of\n"
"type 0 is probably unwise. You can delete\n"
"a partition using the `d' command.\n"
msgstr ""

#: fdisk/fdisk.c:1770
#, c-format
msgid ""
"You cannot change a partition into an extended one or vice versa\n"
"Delete it first.\n"
msgstr ""

#: fdisk/fdisk.c:1779
#, c-format
msgid ""
"Consider leaving partition 3 as Whole disk (5),\n"
"as SunOS/Solaris expects it and even Linux likes it.\n"
"\n"
msgstr ""

#: fdisk/fdisk.c:1785
#, c-format
msgid ""
"Consider leaving partition 9 as volume header (0),\n"
"and partition 11 as entire volume (6), as IRIX expects it.\n"
"\n"
msgstr ""

#: fdisk/fdisk.c:1802
#, c-format
msgid "Changed system type of partition %d to %x (%s)\n"
msgstr ""

#: fdisk/fdisk.c:1805
#, c-format
msgid "System type of partition %d is unchanged: %x (%s)\n"
msgstr ""

#: fdisk/fdisk.c:1860
#, c-format
msgid "Partition %d has different physical/logical beginnings (non-Linux?):\n"
msgstr ""

#: fdisk/fdisk.c:1862 fdisk/fdisk.c:1870 fdisk/fdisk.c:1879 fdisk/fdisk.c:1889
#, c-format
msgid "     phys=(%d, %d, %d) "
msgstr ""

#: fdisk/fdisk.c:1863 fdisk/fdisk.c:1871
#, c-format
msgid "logical=(%d, %d, %d)\n"
msgstr ""

#: fdisk/fdisk.c:1868
#, c-format
msgid "Partition %d has different physical/logical endings:\n"
msgstr ""

#: fdisk/fdisk.c:1877
#, c-format
msgid "Partition %i does not start on cylinder boundary:\n"
msgstr ""

#: fdisk/fdisk.c:1880
#, c-format
msgid "should be (%d, %d, 1)\n"
msgstr ""

#: fdisk/fdisk.c:1886
#, c-format
msgid "Partition %i does not end on cylinder boundary.\n"
msgstr ""

#: fdisk/fdisk.c:1890
#, c-format
msgid "should be (%d, %d, %d)\n"
msgstr ""

#: fdisk/fdisk.c:1900
#, c-format
msgid "Partition %i does not start on physical sector boundary.\n"
msgstr ""

#: fdisk/fdisk.c:1910
#, c-format
msgid ""
"\n"
"Disk %s: %ld MB, %lld bytes\n"
msgstr ""

#: fdisk/fdisk.c:1914
#, c-format
msgid ""
"\n"
"Disk %s: %ld.%ld GB, %llu bytes\n"
msgstr ""

#: fdisk/fdisk.c:1917
#, c-format
msgid "%d heads, %llu sectors/track, %d cylinders"
msgstr ""

#: fdisk/fdisk.c:1920
#, c-format
msgid ", total %llu sectors"
msgstr ""

#: fdisk/fdisk.c:1922
#, c-format
msgid "Units = %s of %d * %d = %d bytes\n"
msgstr ""

#: fdisk/fdisk.c:1926
#, c-format
msgid "Sector size (logical/physical): %u bytes / %lu bytes\n"
msgstr ""

#: fdisk/fdisk.c:1928
#, c-format
msgid "I/O size (minimum/optimal): %lu bytes / %lu bytes\n"
msgstr ""

#: fdisk/fdisk.c:1931
#, c-format
msgid "Alignment offset: %lu bytes\n"
msgstr ""

#: fdisk/fdisk.c:2040
#, c-format
msgid ""
"Nothing to do. Ordering is correct already.\n"
"\n"
msgstr ""

#: fdisk/fdisk.c:2068
#, fuzzy, c-format
msgid "Done.\n"
msgstr "完成\n"

#: fdisk/fdisk.c:2096
#, c-format
msgid ""
"This doesn't look like a partition table\n"
"Probably you selected the wrong device.\n"
"\n"
msgstr ""

#: fdisk/fdisk.c:2109
#, c-format
msgid "%*s Boot      Start         End      Blocks   Id  System\n"
msgstr ""

#: fdisk/fdisk.c:2110 fdisk/fdisksgilabel.c:211 fdisk/fdisksunlabel.c:597
msgid "Device"
msgstr ""

#: fdisk/fdisk.c:2148
#, c-format
msgid ""
"\n"
"Partition table entries are not in disk order\n"
msgstr ""

#: fdisk/fdisk.c:2158
#, c-format
msgid ""
"\n"
"Disk %s: %d heads, %llu sectors, %d cylinders\n"
"\n"
msgstr ""

#: fdisk/fdisk.c:2160
#, c-format
msgid "Nr AF  Hd Sec  Cyl  Hd Sec  Cyl     Start      Size ID\n"
msgstr ""

#: fdisk/fdisk.c:2208
#, c-format
msgid "Warning: partition %d contains sector 0\n"
msgstr ""

#: fdisk/fdisk.c:2211
#, c-format
msgid "Partition %d: head %d greater than maximum %d\n"
msgstr ""

#: fdisk/fdisk.c:2214
#, c-format
msgid "Partition %d: sector %d greater than maximum %llu\n"
msgstr ""

#: fdisk/fdisk.c:2217
#, c-format
msgid "Partitions %d: cylinder %d greater than maximum %d\n"
msgstr ""

#: fdisk/fdisk.c:2221
#, c-format
msgid "Partition %d: previous sectors %d disagrees with total %d\n"
msgstr ""

#: fdisk/fdisk.c:2255
#, c-format
msgid "Warning: bad start-of-data in partition %d\n"
msgstr ""

#: fdisk/fdisk.c:2263
#, c-format
msgid "Warning: partition %d overlaps partition %d.\n"
msgstr ""

#: fdisk/fdisk.c:2283
#, c-format
msgid "Warning: partition %d is empty\n"
msgstr ""

#: fdisk/fdisk.c:2288
#, c-format
msgid "Logical partition %d not entirely in partition %d\n"
msgstr ""

#: fdisk/fdisk.c:2294
#, c-format
msgid "Total allocated sectors %llu greater than the maximum %llu\n"
msgstr ""

#: fdisk/fdisk.c:2297
#, c-format
msgid "Remaining %lld unallocated %d-byte sectors\n"
msgstr ""

#: fdisk/fdisk.c:2332 fdisk/fdisksgilabel.c:624 fdisk/fdisksunlabel.c:410
#, c-format
msgid "Partition %d is already defined.  Delete it before re-adding it.\n"
msgstr ""

#: fdisk/fdisk.c:2378
#, c-format
msgid "Sector %llu is already allocated\n"
msgstr ""

#: fdisk/fdisk.c:2414
#, c-format
msgid "No free sectors available\n"
msgstr ""

#: fdisk/fdisk.c:2425
#, c-format
msgid "Last %1$s, +%2$s or +size{K,M,G}"
msgstr ""

#: fdisk/fdisk.c:2479
#, c-format
msgid "Adding logical partition %d\n"
msgstr ""

#: fdisk/fdisk.c:2501
#, c-format
msgid ""
"\tSorry - this fdisk cannot handle AIX disk labels.\n"
"\tIf you want to add DOS-type partitions, create\n"
"\ta new empty DOS partition table first. (Use o.)\n"
"\tWARNING: This will destroy the present disk contents.\n"
msgstr ""

#: fdisk/fdisk.c:2510
#, c-format
msgid ""
"\tSorry - this fdisk cannot handle Mac disk labels.\n"
"\tIf you want to add DOS-type partitions, create\n"
"\ta new empty DOS partition table first. (Use o.)\n"
"\tWARNING: This will destroy the present disk contents.\n"
msgstr ""

#: fdisk/fdisk.c:2528
#, c-format
msgid "All primary partitions are in use\n"
msgstr ""

#: fdisk/fdisk.c:2531
#, c-format
msgid ""
"If you want to create more than four partitions, you must replace a\n"
"primary partition with an extended partition first.\n"
msgstr ""

#: fdisk/fdisk.c:2534
#, c-format
msgid "All logical partitions are in use\n"
msgstr ""

#: fdisk/fdisk.c:2535
#, c-format
msgid "Adding a primary partition\n"
msgstr ""

#: fdisk/fdisk.c:2542
#, c-format
msgid ""
"Partition type:\n"
"   p   primary (%d primary, %d extended, %d free)\n"
"%s\n"
"Select (default %c): "
msgstr ""

#: fdisk/fdisk.c:2547
msgid "   l   logical (numbered from 5)"
msgstr ""

#: fdisk/fdisk.c:2547
msgid "   e   extended"
msgstr ""

#: fdisk/fdisk.c:2553
#, c-format
msgid "Using default response %c\n"
msgstr ""

#: fdisk/fdisk.c:2569
#, fuzzy, c-format
msgid "Invalid partition type `%c'\n"
msgstr "重新读取分区表"

#: fdisk/fdisk.c:2611
#, c-format
msgid ""
"The partition table has been altered!\n"
"\n"
msgstr ""

#: fdisk/fdisk.c:2624
#, c-format
msgid "Calling ioctl() to re-read partition table.\n"
msgstr ""

#: fdisk/fdisk.c:2633
#, c-format
msgid ""
"\n"
"WARNING: Re-reading the partition table failed with error %d: %s.\n"
"The kernel still uses the old table. The new table will be used at\n"
"the next reboot or after you run partprobe(8) or kpartx(8)\n"
msgstr ""

#: fdisk/fdisk.c:2641
#, c-format
msgid ""
"\n"
"WARNING: If you have created or modified any DOS 6.x\n"
"partitions, please see the fdisk manual page for additional\n"
"information.\n"
msgstr ""

#: fdisk/fdisk.c:2647
#, c-format
msgid ""
"\n"
"Error closing file\n"
msgstr ""

#: fdisk/fdisk.c:2651
#, c-format
msgid "Syncing disks.\n"
msgstr ""

#: fdisk/fdisk.c:2697
#, c-format
msgid "Partition %d has no data area\n"
msgstr ""

#: fdisk/fdisk.c:2726
msgid "New beginning of data"
msgstr ""

#: fdisk/fdisk.c:2742
msgid "Expert command (m for help): "
msgstr ""

#: fdisk/fdisk.c:2755
msgid "Number of cylinders"
msgstr ""

#: fdisk/fdisk.c:2780
msgid "Number of heads"
msgstr ""

#: fdisk/fdisk.c:2807
msgid "Number of sectors"
msgstr ""

#: fdisk/fdisk.c:2809
#, c-format
msgid "Warning: setting sector offset for DOS compatiblity\n"
msgstr ""

#: fdisk/fdisk.c:2868
#, c-format
msgid ""
"\n"
"WARNING: GPT (GUID Partition Table) detected on '%s'! The util fdisk doesn't "
"support GPT. Use GNU Parted.\n"
"\n"
msgstr ""

#: fdisk/fdisk.c:2890
#, c-format
msgid "Disk %s doesn't contain a valid partition table\n"
msgstr ""

#: fdisk/fdisk.c:2901
#, c-format
msgid "Cannot open %s\n"
msgstr ""

#: fdisk/fdisk.c:2920 fdisk/sfdisk.c:2713
#, c-format
msgid "cannot open %s\n"
msgstr ""

#: fdisk/fdisk.c:2944
#, c-format
msgid "%c: unknown command\n"
msgstr ""

#: fdisk/fdisk.c:3019
#, c-format
msgid "This kernel finds the sector size itself - -b option ignored\n"
msgstr ""

#: fdisk/fdisk.c:3023
#, c-format
msgid ""
"Warning: the -b (set sector size) option should be used with one specified "
"device\n"
msgstr ""

#: fdisk/fdisk.c:3083
#, c-format
msgid "Detected an OSF/1 disklabel on %s, entering disklabel mode.\n"
msgstr ""

#: fdisk/fdisk.c:3093
msgid "Command (m for help): "
msgstr ""

#: fdisk/fdisk.c:3109
#, c-format
msgid ""
"\n"
"The current boot file is: %s\n"
msgstr ""

#: fdisk/fdisk.c:3111
msgid "Please enter the name of the new boot file: "
msgstr ""

#: fdisk/fdisk.c:3113
#, c-format
msgid "Boot file unchanged\n"
msgstr ""

#: fdisk/fdisk.c:3186
#, c-format
msgid ""
"\n"
"\tSorry, no experts menu for SGI partition tables available.\n"
"\n"
msgstr ""

#: fdisk/fdiskmaclabel.c:30
msgid ""
"\n"
"\tThere is a valid Mac label on this disk.\n"
"\tUnfortunately fdisk(1) cannot handle these disks.\n"
"\tUse either pdisk or parted to modify the partition table.\n"
"\tNevertheless some advice:\n"
"\t1. fdisk will destroy its contents on write.\n"
"\t2. Be sure that this disk is NOT a still vital\n"
"\t   part of a volume group. (Otherwise you may\n"
"\t   erase the other disks as well, if unmirrored.)\n"
msgstr ""

#: fdisk/fdisksgilabel.c:84
msgid "SGI volhdr"
msgstr ""

#: fdisk/fdisksgilabel.c:85
msgid "SGI trkrepl"
msgstr ""

#: fdisk/fdisksgilabel.c:86
msgid "SGI secrepl"
msgstr ""

#: fdisk/fdisksgilabel.c:87
msgid "SGI raw"
msgstr ""

#: fdisk/fdisksgilabel.c:88
msgid "SGI bsd"
msgstr ""

#: fdisk/fdisksgilabel.c:89
msgid "SGI sysv"
msgstr ""

#: fdisk/fdisksgilabel.c:90
msgid "SGI volume"
msgstr ""

#: fdisk/fdisksgilabel.c:91
msgid "SGI efs"
msgstr ""

#: fdisk/fdisksgilabel.c:92
msgid "SGI lvol"
msgstr ""

#: fdisk/fdisksgilabel.c:93
msgid "SGI rlvol"
msgstr ""

#: fdisk/fdisksgilabel.c:94
msgid "SGI xfs"
msgstr ""

#: fdisk/fdisksgilabel.c:95
msgid "SGI xfslog"
msgstr ""

#: fdisk/fdisksgilabel.c:96
msgid "SGI xlv"
msgstr ""

#: fdisk/fdisksgilabel.c:97
msgid "SGI xvm"
msgstr ""

#: fdisk/fdisksgilabel.c:98 fdisk/fdisksunlabel.c:50
msgid "Linux swap"
msgstr ""

#: fdisk/fdisksgilabel.c:99 fdisk/fdisksunlabel.c:51
msgid "Linux native"
msgstr ""

#: fdisk/fdisksgilabel.c:100 fdisk/fdisksunlabel.c:52
#: fdisk/i386_sys_types.c:64
msgid "Linux LVM"
msgstr ""

#: fdisk/fdisksgilabel.c:101
msgid "Linux RAID"
msgstr ""

#: fdisk/fdisksgilabel.c:153
#, c-format
msgid ""
"According to MIPS Computer Systems, Inc the Label must not contain more than "
"512 bytes\n"
msgstr ""

#: fdisk/fdisksgilabel.c:171
#, c-format
msgid "Detected sgi disklabel with wrong checksum.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:189
#, c-format
msgid ""
"\n"
"Disk %s (SGI disk label): %d heads, %llu sectors\n"
"%d cylinders, %d physical cylinders\n"
"%d extra sects/cyl, interleave %d:1\n"
"%s\n"
"Units = %s of %d * %d bytes\n"
"\n"
msgstr ""

#: fdisk/fdisksgilabel.c:202
#, c-format
msgid ""
"\n"
"Disk %s (SGI disk label): %d heads, %llu sectors, %d cylinders\n"
"Units = %s of %d * %d bytes\n"
"\n"
msgstr ""

#: fdisk/fdisksgilabel.c:209
#, c-format
msgid ""
"----- partitions -----\n"
"Pt# %*s  Info     Start       End   Sectors  Id  System\n"
msgstr ""

#: fdisk/fdisksgilabel.c:231
#, c-format
msgid ""
"----- Bootinfo -----\n"
"Bootfile: %s\n"
"----- Directory Entries -----\n"
msgstr ""

#: fdisk/fdisksgilabel.c:239
#, c-format
msgid "%2d: %-10s sector%5u size%8u\n"
msgstr ""

#: fdisk/fdisksgilabel.c:293
#, c-format
msgid ""
"\n"
"Invalid Bootfile!\n"
"\tThe bootfile must be an absolute non-zero pathname,\n"
"\te.g. \"/unix\" or \"/unix.save\".\n"
msgstr ""

#: fdisk/fdisksgilabel.c:299
#, c-format
msgid ""
"\n"
"\tName of Bootfile too long:  16 bytes maximum.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:304
#, c-format
msgid ""
"\n"
"\tBootfile must have a fully qualified pathname.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:311
#, c-format
msgid ""
"\n"
"\tBe aware, that the bootfile is not checked for existence.\n"
"\tSGI's default is \"/unix\" and for backup \"/unix.save\".\n"
msgstr ""

#: fdisk/fdisksgilabel.c:337
#, c-format
msgid ""
"\n"
"\tBootfile is changed to \"%s\".\n"
msgstr ""

#: fdisk/fdisksgilabel.c:427
#, c-format
msgid "More than one entire disk entry present.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:434 fdisk/fdisksunlabel.c:381
#, c-format
msgid "No partitions defined\n"
msgstr ""

#: fdisk/fdisksgilabel.c:440
#, c-format
msgid "IRIX likes when Partition 11 covers the entire disk.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:442
#, c-format
msgid ""
"The entire disk partition should start at block 0,\n"
"not at diskblock %d.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:448
#, c-format
msgid ""
"The entire disk partition is only %d diskblock large,\n"
"but the disk is %d diskblocks long.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:454
#, c-format
msgid "One Partition (#11) should cover the entire disk.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:464
#, c-format
msgid "Partition %d does not start on cylinder boundary.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:470
#, c-format
msgid "Partition %d does not end on cylinder boundary.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:477
#, c-format
msgid "The Partition %d and %d overlap by %d sectors.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:485 fdisk/fdisksgilabel.c:506
#, c-format
msgid "Unused gap of %8u sectors - sectors %8u-%u\n"
msgstr ""

#: fdisk/fdisksgilabel.c:517
#, c-format
msgid ""
"\n"
"The boot partition does not exist.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:520
#, c-format
msgid ""
"\n"
"The swap partition does not exist.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:524
#, c-format
msgid ""
"\n"
"The swap partition has no swap type.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:527
#, c-format
msgid "\tYou have chosen an unusual boot file name.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:536
#, c-format
msgid "Sorry, only for non-empty partitions you can change the tag.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:542
msgid ""
"It is highly recommended that the partition at offset 0\n"
"is of type \"SGI volhdr\", the IRIX system will rely on it to\n"
"retrieve from its directory standalone tools like sash and fx.\n"
"Only the \"SGI volume\" entire disk section may violate this.\n"
"Type YES if you are sure about tagging this partition differently.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:547 fdisk/fdisksunlabel.c:548
msgid "YES\n"
msgstr ""

#: fdisk/fdisksgilabel.c:572
#, c-format
msgid "Do You know, You got a partition overlap on the disk?\n"
msgstr ""

#: fdisk/fdisksgilabel.c:630
#, c-format
msgid "Attempting to generate entire disk entry automatically.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:635
#, c-format
msgid "The entire disk is already covered with partitions.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:639
#, c-format
msgid "You got a partition overlap on the disk. Fix it first!\n"
msgstr ""

#: fdisk/fdisksgilabel.c:648 fdisk/fdisksgilabel.c:677
#, c-format
msgid ""
"It is highly recommended that eleventh partition\n"
"covers the entire disk and is of type `SGI volume'\n"
msgstr ""

#: fdisk/fdisksgilabel.c:664
#, c-format
msgid "You will get a partition overlap on the disk. Fix it first!\n"
msgstr ""

#: fdisk/fdisksgilabel.c:669
#, c-format
msgid " Last %s"
msgstr ""

#: fdisk/fdisksgilabel.c:699
#, c-format
msgid ""
"Building a new SGI disklabel. Changes will remain in memory only,\n"
"until you decide to write them. After that, of course, the previous\n"
"content will be unrecoverably lost.\n"
"\n"
msgstr ""

#: fdisk/fdisksgilabel.c:722 fdisk/fdisksunlabel.c:220
#, c-format
msgid ""
"Warning:  BLKGETSIZE ioctl failed on %s.  Using geometry cylinder value of "
"%d.\n"
"This value may be truncated for devices > 33.8 GB.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:736
#, c-format
msgid "Trying to keep parameters of partition %d.\n"
msgstr ""

#: fdisk/fdisksgilabel.c:738
#, c-format
msgid "ID=%02x\tSTART=%d\tLENGTH=%d\n"
msgstr ""

#: fdisk/fdisksunlabel.c:38
msgid "Unassigned"
msgstr ""

#: fdisk/fdisksunlabel.c:40
msgid "SunOS root"
msgstr ""

#: fdisk/fdisksunlabel.c:41
msgid "SunOS swap"
msgstr ""

#: fdisk/fdisksunlabel.c:42
msgid "SunOS usr"
msgstr ""

#: fdisk/fdisksunlabel.c:43
msgid "Whole disk"
msgstr ""

#: fdisk/fdisksunlabel.c:44
msgid "SunOS stand"
msgstr ""

#: fdisk/fdisksunlabel.c:45
msgid "SunOS var"
msgstr ""

#: fdisk/fdisksunlabel.c:46
msgid "SunOS home"
msgstr ""

#: fdisk/fdisksunlabel.c:47
msgid "SunOS alt sectors"
msgstr ""

#: fdisk/fdisksunlabel.c:48
msgid "SunOS cachefs"
msgstr ""

#: fdisk/fdisksunlabel.c:49
msgid "SunOS reserved"
msgstr ""

#: fdisk/fdisksunlabel.c:53 fdisk/i386_sys_types.c:104
msgid "Linux raid autodetect"
msgstr ""

#: fdisk/fdisksunlabel.c:134
#, c-format
msgid ""
"Detected sun disklabel with wrong checksum.\n"
"Probably you'll have to set all the values,\n"
"e.g. heads, sectors, cylinders and partitions\n"
"or force a fresh label (s command in main menu)\n"
msgstr ""

#: fdisk/fdisksunlabel.c:146
#, c-format
msgid "Detected sun disklabel with wrong version [0x%08x].\n"
msgstr ""

#: fdisk/fdisksunlabel.c:151
#, c-format
msgid "Detected sun disklabel with wrong sanity [0x%08x].\n"
msgstr ""

#: fdisk/fdisksunlabel.c:156
#, c-format
msgid "Detected sun disklabel with wrong num_partitions [%u].\n"
msgstr ""

#: fdisk/fdisksunlabel.c:161
#, c-format
msgid ""
"Warning: Wrong values need to be fixed up and will be corrected by w(rite)\n"
msgstr ""

#: fdisk/fdisksunlabel.c:191
#, c-format
msgid ""
"Building a new sun disklabel. Changes will remain in memory only,\n"
"until you decide to write them. After that, of course, the previous\n"
"content won't be recoverable.\n"
"\n"
msgstr ""

#: fdisk/fdisksunlabel.c:229
msgid "Sectors/track"
msgstr ""

#: fdisk/fdisksunlabel.c:344
#, c-format
msgid "Partition %d doesn't end on cylinder boundary\n"
msgstr ""

#: fdisk/fdisksunlabel.c:364
#, c-format
msgid "Partition %d overlaps with others in sectors %d-%d\n"
msgstr ""

#: fdisk/fdisksunlabel.c:386
#, c-format
msgid "Unused gap - sectors 0-%d\n"
msgstr ""

#: fdisk/fdisksunlabel.c:388 fdisk/fdisksunlabel.c:394
#, c-format
msgid "Unused gap - sectors %d-%d\n"
msgstr ""

#: fdisk/fdisksunlabel.c:420
#, c-format
msgid ""
"Other partitions already cover the whole disk.\n"
"Delete some/shrink them before retry.\n"
msgstr ""

#: fdisk/fdisksunlabel.c:443
#, c-format
msgid ""
"It is highly recommended that the third partition covers the whole disk\n"
"and is of type `Whole disk'\n"
msgstr ""

#: fdisk/fdisksunlabel.c:471
#, c-format
msgid "Sector %d is already allocated\n"
msgstr ""

#: fdisk/fdisksunlabel.c:501
#, c-format
msgid ""
"You haven't covered the whole disk with the 3rd partition, but your value\n"
"%d %s covers some other partition. Your entry has been changed\n"
"to %d %s\n"
msgstr ""

#: fdisk/fdisksunlabel.c:528
#, c-format
msgid ""
"If you want to maintain SunOS/Solaris compatibility, consider leaving this\n"
"partition as Whole disk (5), starting at 0, with %u sectors\n"
msgstr ""

#: fdisk/fdisksunlabel.c:543
msgid ""
"It is highly recommended that the partition at offset 0\n"
"is UFS, EXT2FS filesystem or SunOS swap. Putting Linux swap\n"
"there may destroy your partition table and bootblock.\n"
"Type YES if you're very sure you would like that partition\n"
"tagged with 82 (Linux swap): "
msgstr ""

#: fdisk/fdisksunlabel.c:575
#, c-format
msgid ""
"\n"
"Disk %s (Sun disk label): %u heads, %llu sectors, %d rpm\n"
"%u cylinders, %d alternate cylinders, %d physical cylinders\n"
"%d extra sects/cyl, interleave %d:1\n"
"Label ID: %s\n"
"Volume ID: %s\n"
"Units = %s of %d * 512 bytes\n"
"\n"
msgstr ""

#: fdisk/fdisksunlabel.c:591
#, c-format
msgid ""
"\n"
"Disk %s (Sun disk label): %u heads, %llu sectors, %u cylinders\n"
"Units = %s of %d * 512 bytes\n"
"\n"
msgstr ""

#: fdisk/fdisksunlabel.c:596
#, c-format
msgid "%*s Flag    Start       End    Blocks   Id  System\n"
msgstr ""

#: fdisk/fdisksunlabel.c:624
msgid "Number of alternate cylinders"
msgstr ""

#: fdisk/fdisksunlabel.c:636
msgid "Extra sectors per cylinder"
msgstr ""

#: fdisk/fdisksunlabel.c:643
msgid "Interleave factor"
msgstr ""

#: fdisk/fdisksunlabel.c:650
msgid "Rotation speed (rpm)"
msgstr ""

#: fdisk/fdisksunlabel.c:657
msgid "Number of physical cylinders"
msgstr ""

#: fdisk/i386_sys_types.c:6
msgid "Empty"
msgstr ""

#: fdisk/i386_sys_types.c:7
msgid "FAT12"
msgstr ""

#: fdisk/i386_sys_types.c:8
msgid "XENIX root"
msgstr ""

#: fdisk/i386_sys_types.c:9
msgid "XENIX usr"
msgstr ""

#: fdisk/i386_sys_types.c:10
msgid "FAT16 <32M"
msgstr ""

#: fdisk/i386_sys_types.c:11
msgid "Extended"
msgstr ""

#: fdisk/i386_sys_types.c:12
msgid "FAT16"
msgstr ""

#: fdisk/i386_sys_types.c:13
msgid "HPFS/NTFS/exFAT"
msgstr ""

#: fdisk/i386_sys_types.c:14
msgid "AIX"
msgstr ""

#: fdisk/i386_sys_types.c:15
msgid "AIX bootable"
msgstr ""

#: fdisk/i386_sys_types.c:16
msgid "OS/2 Boot Manager"
msgstr ""

#: fdisk/i386_sys_types.c:17
msgid "W95 FAT32"
msgstr ""

#: fdisk/i386_sys_types.c:18
msgid "W95 FAT32 (LBA)"
msgstr ""

#: fdisk/i386_sys_types.c:19
msgid "W95 FAT16 (LBA)"
msgstr ""

#: fdisk/i386_sys_types.c:20
msgid "W95 Ext'd (LBA)"
msgstr ""

#: fdisk/i386_sys_types.c:21
msgid "OPUS"
msgstr ""

#: fdisk/i386_sys_types.c:22
msgid "Hidden FAT12"
msgstr ""

#: fdisk/i386_sys_types.c:23
msgid "Compaq diagnostics"
msgstr ""

#: fdisk/i386_sys_types.c:24
msgid "Hidden FAT16 <32M"
msgstr ""

#: fdisk/i386_sys_types.c:25
msgid "Hidden FAT16"
msgstr ""

#: fdisk/i386_sys_types.c:26
msgid "Hidden HPFS/NTFS"
msgstr ""

#: fdisk/i386_sys_types.c:27
msgid "AST SmartSleep"
msgstr ""

#: fdisk/i386_sys_types.c:28
msgid "Hidden W95 FAT32"
msgstr ""

#: fdisk/i386_sys_types.c:29
msgid "Hidden W95 FAT32 (LBA)"
msgstr ""

#: fdisk/i386_sys_types.c:30
msgid "Hidden W95 FAT16 (LBA)"
msgstr ""

#: fdisk/i386_sys_types.c:31
msgid "NEC DOS"
msgstr ""

#: fdisk/i386_sys_types.c:32
msgid "Hidden NTFS WinRE"
msgstr ""

#: fdisk/i386_sys_types.c:33
msgid "Plan 9"
msgstr ""

#: fdisk/i386_sys_types.c:34
msgid "PartitionMagic recovery"
msgstr ""

#: fdisk/i386_sys_types.c:35
msgid "Venix 80286"
msgstr ""

#: fdisk/i386_sys_types.c:36
msgid "PPC PReP Boot"
msgstr ""

#: fdisk/i386_sys_types.c:37
msgid "SFS"
msgstr ""

#: fdisk/i386_sys_types.c:38
msgid "QNX4.x"
msgstr ""

#: fdisk/i386_sys_types.c:39
msgid "QNX4.x 2nd part"
msgstr ""

#: fdisk/i386_sys_types.c:40
msgid "QNX4.x 3rd part"
msgstr ""

#: fdisk/i386_sys_types.c:41
msgid "OnTrack DM"
msgstr ""

#: fdisk/i386_sys_types.c:42
msgid "OnTrack DM6 Aux1"
msgstr ""

#: fdisk/i386_sys_types.c:43
msgid "CP/M"
msgstr ""

#: fdisk/i386_sys_types.c:44
msgid "OnTrack DM6 Aux3"
msgstr ""

#: fdisk/i386_sys_types.c:45
msgid "OnTrackDM6"
msgstr ""

#: fdisk/i386_sys_types.c:46
msgid "EZ-Drive"
msgstr ""

#: fdisk/i386_sys_types.c:47
msgid "Golden Bow"
msgstr ""

#: fdisk/i386_sys_types.c:48
msgid "Priam Edisk"
msgstr ""

#: fdisk/i386_sys_types.c:49 fdisk/i386_sys_types.c:93
#: fdisk/i386_sys_types.c:99 fdisk/i386_sys_types.c:100
msgid "SpeedStor"
msgstr ""

#: fdisk/i386_sys_types.c:50
msgid "GNU HURD or SysV"
msgstr ""

#: fdisk/i386_sys_types.c:51
msgid "Novell Netware 286"
msgstr ""

#: fdisk/i386_sys_types.c:52
msgid "Novell Netware 386"
msgstr ""

#: fdisk/i386_sys_types.c:53
msgid "DiskSecure Multi-Boot"
msgstr ""

#: fdisk/i386_sys_types.c:54
msgid "PC/IX"
msgstr ""

#: fdisk/i386_sys_types.c:55
msgid "Old Minix"
msgstr ""

#: fdisk/i386_sys_types.c:56
msgid "Minix / old Linux"
msgstr ""

#: fdisk/i386_sys_types.c:57
msgid "Linux swap / Solaris"
msgstr ""

#: fdisk/i386_sys_types.c:58
msgid "Linux"
msgstr ""

#: fdisk/i386_sys_types.c:59
msgid "OS/2 hidden C: drive"
msgstr ""

#: fdisk/i386_sys_types.c:60
msgid "Linux extended"
msgstr ""

#: fdisk/i386_sys_types.c:61 fdisk/i386_sys_types.c:62
msgid "NTFS volume set"
msgstr ""

#: fdisk/i386_sys_types.c:63
msgid "Linux plaintext"
msgstr ""

#: fdisk/i386_sys_types.c:65
msgid "Amoeba"
msgstr ""

#: fdisk/i386_sys_types.c:66
msgid "Amoeba BBT"
msgstr ""

#: fdisk/i386_sys_types.c:67
msgid "BSD/OS"
msgstr ""

#: fdisk/i386_sys_types.c:68
msgid "IBM Thinkpad hibernation"
msgstr ""

#: fdisk/i386_sys_types.c:69
msgid "FreeBSD"
msgstr ""

#: fdisk/i386_sys_types.c:70
msgid "OpenBSD"
msgstr ""

#: fdisk/i386_sys_types.c:71
msgid "NeXTSTEP"
msgstr ""

#: fdisk/i386_sys_types.c:72
msgid "Darwin UFS"
msgstr ""

#: fdisk/i386_sys_types.c:73
msgid "NetBSD"
msgstr ""

#: fdisk/i386_sys_types.c:74
msgid "Darwin boot"
msgstr ""

#: fdisk/i386_sys_types.c:75
msgid "HFS / HFS+"
msgstr ""

#: fdisk/i386_sys_types.c:76
msgid "BSDI fs"
msgstr ""

#: fdisk/i386_sys_types.c:77
msgid "BSDI swap"
msgstr ""

#: fdisk/i386_sys_types.c:78
msgid "Boot Wizard hidden"
msgstr ""

#: fdisk/i386_sys_types.c:79
msgid "Solaris boot"
msgstr ""

#: fdisk/i386_sys_types.c:80
msgid "Solaris"
msgstr ""

#: fdisk/i386_sys_types.c:81
msgid "DRDOS/sec (FAT-12)"
msgstr ""

#: fdisk/i386_sys_types.c:82
msgid "DRDOS/sec (FAT-16 < 32M)"
msgstr ""

#: fdisk/i386_sys_types.c:83
msgid "DRDOS/sec (FAT-16)"
msgstr ""

#: fdisk/i386_sys_types.c:84
msgid "Syrinx"
msgstr ""

#: fdisk/i386_sys_types.c:85
msgid "Non-FS data"
msgstr ""

#: fdisk/i386_sys_types.c:86
msgid "CP/M / CTOS / ..."
msgstr ""

#: fdisk/i386_sys_types.c:88
msgid "Dell Utility"
msgstr ""

#: fdisk/i386_sys_types.c:89
msgid "BootIt"
msgstr ""

#: fdisk/i386_sys_types.c:90
msgid "DOS access"
msgstr ""

#: fdisk/i386_sys_types.c:92
msgid "DOS R/O"
msgstr ""

#: fdisk/i386_sys_types.c:95
msgid "BeOS fs"
msgstr ""

#: fdisk/i386_sys_types.c:96
msgid "GPT"
msgstr ""

#: fdisk/i386_sys_types.c:97
msgid "EFI (FAT-12/16/32)"
msgstr ""

#: fdisk/i386_sys_types.c:98
msgid "Linux/PA-RISC boot"
msgstr ""

#: fdisk/i386_sys_types.c:101
msgid "DOS secondary"
msgstr ""

#: fdisk/i386_sys_types.c:102
msgid "VMware VMFS"
msgstr ""

#: fdisk/i386_sys_types.c:103
msgid "VMware VMKCORE"
msgstr ""

#: fdisk/i386_sys_types.c:107
msgid "LANstep"
msgstr ""

#: fdisk/i386_sys_types.c:108
msgid "BBT"
msgstr ""

#: fdisk/sfdisk.c:166
#, c-format
msgid "seek error on %s - cannot seek to %lu\n"
msgstr ""

#: fdisk/sfdisk.c:171
#, c-format
msgid "seek error: wanted 0x%08x%08x, got 0x%08x%08x\n"
msgstr ""

#: fdisk/sfdisk.c:217
msgid "out of memory - giving up\n"
msgstr ""

#: fdisk/sfdisk.c:222 fdisk/sfdisk.c:305
#, c-format
msgid "read error on %s - cannot read sector %lu\n"
msgstr ""

#: fdisk/sfdisk.c:240
#, c-format
msgid "ERROR: sector %lu does not have an msdos signature\n"
msgstr ""

#: fdisk/sfdisk.c:255
#, c-format
msgid "write error on %s - cannot write sector %lu\n"
msgstr ""

#: fdisk/sfdisk.c:293
#, c-format
msgid "cannot open partition sector save file (%s)\n"
msgstr ""

#: fdisk/sfdisk.c:311
#, c-format
msgid "write error on %s\n"
msgstr ""

#: fdisk/sfdisk.c:337
#, c-format
msgid "cannot stat partition restore file (%s)\n"
msgstr ""

#: fdisk/sfdisk.c:342
msgid "partition restore file has wrong size - not restoring\n"
msgstr ""

#: fdisk/sfdisk.c:346
msgid "out of memory?\n"
msgstr ""

#: fdisk/sfdisk.c:352
#, c-format
msgid "cannot open partition restore file (%s)\n"
msgstr ""

#: fdisk/sfdisk.c:358
#, c-format
msgid "error reading %s\n"
msgstr ""

#: fdisk/sfdisk.c:365
#, c-format
msgid "cannot open device %s for writing\n"
msgstr ""

#: fdisk/sfdisk.c:377
#, c-format
msgid "error writing sector %lu on %s\n"
msgstr ""

#: fdisk/sfdisk.c:443
#, c-format
msgid "Disk %s: cannot get geometry\n"
msgstr ""

#: fdisk/sfdisk.c:460
#, c-format
msgid "Disk %s: cannot get size\n"
msgstr ""

#: fdisk/sfdisk.c:492
#, c-format
msgid ""
"Warning: start=%lu - this looks like a partition rather than\n"
"the entire disk. Using fdisk on it is probably meaningless.\n"
"[Use the --force option if you really want this]\n"
msgstr ""

#: fdisk/sfdisk.c:500
#, c-format
msgid "Warning: HDIO_GETGEO says that there are %lu heads\n"
msgstr ""

#: fdisk/sfdisk.c:503
#, c-format
msgid "Warning: HDIO_GETGEO says that there are %lu sectors\n"
msgstr ""

#: fdisk/sfdisk.c:507
#, c-format
msgid "Warning: BLKGETSIZE/HDIO_GETGEO says that there are %lu cylinders\n"
msgstr ""

#: fdisk/sfdisk.c:512
#, c-format
msgid ""
"Warning: unlikely number of sectors (%lu) - usually at most 63\n"
"This will give problems with all software that uses C/H/S addressing.\n"
msgstr ""

#: fdisk/sfdisk.c:516
#, c-format
msgid ""
"\n"
"Disk %s: %lu cylinders, %lu heads, %lu sectors/track\n"
msgstr ""

#: fdisk/sfdisk.c:602
#, c-format
msgid ""
"%s of partition %s has impossible value for head: %lu (should be in 0-%lu)\n"
msgstr ""

#: fdisk/sfdisk.c:607
#, c-format
msgid ""
"%s of partition %s has impossible value for sector: %lu (should be in 1-"
"%lu)\n"
msgstr ""

#: fdisk/sfdisk.c:612
#, c-format
msgid ""
"%s of partition %s has impossible value for cylinders: %lu (should be in 0-"
"%lu)\n"
msgstr ""

#: fdisk/sfdisk.c:652
#, c-format
msgid ""
"Id  Name\n"
"\n"
msgstr ""

#: fdisk/sfdisk.c:818
#, c-format
msgid "Re-reading the partition table ...\n"
msgstr ""

#: fdisk/sfdisk.c:823
msgid ""
"The command to re-read the partition table failed.\n"
"Run partprobe(8), kpartx(8) or reboot your system now,\n"
"before using mkfs\n"
msgstr ""

#: fdisk/sfdisk.c:831
#, c-format
msgid "Error closing %s\n"
msgstr ""

#: fdisk/sfdisk.c:872
#, c-format
msgid "%s: no such partition\n"
msgstr ""

#: fdisk/sfdisk.c:895
msgid "unrecognized format - using sectors\n"
msgstr ""

#: fdisk/sfdisk.c:954
#, c-format
msgid "unimplemented format - using %s\n"
msgstr ""

#: fdisk/sfdisk.c:958
#, c-format
msgid ""
"Units = cylinders of %lu bytes, blocks of 1024 bytes, counting from %d\n"
"\n"
msgstr ""

#: fdisk/sfdisk.c:960
#, c-format
msgid "   Device Boot Start     End   #cyls    #blocks   Id  System\n"
msgstr ""

#: fdisk/sfdisk.c:965
#, c-format
msgid ""
"Units = sectors of 512 bytes, counting from %d\n"
"\n"
msgstr ""

#: fdisk/sfdisk.c:967
#, c-format
msgid "   Device Boot    Start       End   #sectors  Id  System\n"
msgstr ""

#: fdisk/sfdisk.c:970
#, c-format
msgid ""
"Units = blocks of 1024 bytes, counting from %d\n"
"\n"
msgstr ""

#: fdisk/sfdisk.c:972
#, c-format
msgid "   Device Boot   Start       End    #blocks   Id  System\n"
msgstr ""

#: fdisk/sfdisk.c:975
#, c-format
msgid ""
"Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from %d\n"
"\n"
msgstr ""

#: fdisk/sfdisk.c:977
#, c-format
msgid "   Device Boot Start   End    MiB    #blocks   Id  System\n"
msgstr ""

#: fdisk/sfdisk.c:1136
#, c-format
msgid "\t\tstart: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr ""

#: fdisk/sfdisk.c:1143
#, c-format
msgid "\t\tend: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr ""

#: fdisk/sfdisk.c:1146
#, c-format
msgid "partition ends on cylinder %ld, beyond the end of the disk\n"
msgstr ""

#: fdisk/sfdisk.c:1156
msgid "No partitions found\n"
msgstr ""

#: fdisk/sfdisk.c:1159
#, c-format
msgid ""
"Warning: The partition table looks like it was made\n"
"  for C/H/S=*/%ld/%ld (instead of %ld/%ld/%ld).\n"
"For this listing I'll assume that geometry.\n"
msgstr ""

#: fdisk/sfdisk.c:1207
msgid "no partition table present.\n"
msgstr ""

#: fdisk/sfdisk.c:1209
#, c-format
msgid "strange, only %d partitions defined.\n"
msgstr ""

#: fdisk/sfdisk.c:1218
#, c-format
msgid "Warning: partition %s has size 0 but is not marked Empty\n"
msgstr ""

#: fdisk/sfdisk.c:1221
#, c-format
msgid "Warning: partition %s has size 0 and is bootable\n"
msgstr ""

#: fdisk/sfdisk.c:1224
#, c-format
msgid "Warning: partition %s has size 0 and nonzero start\n"
msgstr ""

#: fdisk/sfdisk.c:1236
#, c-format
msgid "Warning: partition %s is not contained in partition %s\n"
msgstr ""

#: fdisk/sfdisk.c:1248
#, c-format
msgid "Warning: partitions %s and %s overlap\n"
msgstr ""

#: fdisk/sfdisk.c:1260
#, c-format
msgid ""
"Warning: partition %s contains part of the partition table (sector %lu),\n"
"and will destroy it when filled\n"
msgstr ""

#: fdisk/sfdisk.c:1273
#, c-format
msgid "Warning: partition %s starts at sector 0\n"
msgstr ""

#: fdisk/sfdisk.c:1278
#, c-format
msgid "Warning: partition %s extends past end of disk\n"
msgstr ""

#: fdisk/sfdisk.c:1294
msgid ""
"Among the primary partitions, at most one can be extended\n"
" (although this is not a problem under Linux)\n"
msgstr ""

#: fdisk/sfdisk.c:1314
#, c-format
msgid "Warning: partition %s does not start at a cylinder boundary\n"
msgstr ""

#: fdisk/sfdisk.c:1319
#, c-format
msgid "Warning: partition %s does not end at a cylinder boundary\n"
msgstr ""

#: fdisk/sfdisk.c:1337
msgid ""
"Warning: more than one primary partition is marked bootable (active)\n"
"This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
msgstr ""

#: fdisk/sfdisk.c:1344
msgid ""
"Warning: usually one can boot from primary partitions only\n"
"LILO disregards the `bootable' flag.\n"
msgstr ""

#: fdisk/sfdisk.c:1350
msgid ""
"Warning: no primary partition is marked bootable (active)\n"
"This does not matter for LILO, but the DOS MBR will not boot this disk.\n"
msgstr ""

#: fdisk/sfdisk.c:1364
msgid "start"
msgstr ""

#: fdisk/sfdisk.c:1367
#, c-format
msgid ""
"partition %s: start: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr ""

#: fdisk/sfdisk.c:1373
msgid "end"
msgstr ""

#: fdisk/sfdisk.c:1376
#, c-format
msgid "partition %s: end: (c,h,s) expected (%ld,%ld,%ld) found (%ld,%ld,%ld)\n"
msgstr ""

#: fdisk/sfdisk.c:1379
#, c-format
msgid "partition %s ends on cylinder %ld, beyond the end of the disk\n"
msgstr ""

#: fdisk/sfdisk.c:1404
#, c-format
msgid ""
"Warning: shifted start of the extd partition from %ld to %ld\n"
"(For listing purposes only. Do not change its contents.)\n"
msgstr ""

#: fdisk/sfdisk.c:1409
msgid ""
"Warning: extended partition does not start at a cylinder boundary.\n"
"DOS and Linux will interpret the contents differently.\n"
msgstr ""

#: fdisk/sfdisk.c:1427 fdisk/sfdisk.c:1504
#, c-format
msgid "too many partitions - ignoring those past nr (%d)\n"
msgstr ""

#: fdisk/sfdisk.c:1442
msgid "tree of partitions?\n"
msgstr ""

#: fdisk/sfdisk.c:1550
msgid "detected Disk Manager - unable to handle that\n"
msgstr ""

#: fdisk/sfdisk.c:1558
msgid "DM6 signature found - giving up\n"
msgstr ""

#: fdisk/sfdisk.c:1578
msgid "strange..., an extended partition of size 0?\n"
msgstr ""

#: fdisk/sfdisk.c:1585 fdisk/sfdisk.c:1596
msgid "strange..., a BSD partition of size 0?\n"
msgstr ""

#: fdisk/sfdisk.c:1639
#, c-format
msgid " %s: unrecognized partition table type\n"
msgstr ""

#: fdisk/sfdisk.c:1651
msgid "-n flag was given: Nothing changed\n"
msgstr ""

#: fdisk/sfdisk.c:1668
msgid "Failed saving the old sectors - aborting\n"
msgstr ""

#: fdisk/sfdisk.c:1673 fdisk/sfdisk.c:1678
#, c-format
msgid "Failed writing the partition on %s\n"
msgstr ""

#: fdisk/sfdisk.c:1756
msgid "long or incomplete input line - quitting\n"
msgstr ""

#: fdisk/sfdisk.c:1792
#, c-format
msgid "input error: `=' expected after %s field\n"
msgstr ""

#: fdisk/sfdisk.c:1799
#, c-format
msgid "input error: unexpected character %c after %s field\n"
msgstr ""

#: fdisk/sfdisk.c:1805
#, c-format
msgid "unrecognized input: %s\n"
msgstr ""

#: fdisk/sfdisk.c:1846
msgid "number too big\n"
msgstr ""

#: fdisk/sfdisk.c:1850
msgid "trailing junk after number\n"
msgstr ""

#: fdisk/sfdisk.c:1974
msgid "no room for partition descriptor\n"
msgstr ""

#: fdisk/sfdisk.c:2007
msgid "cannot build surrounding extended partition\n"
msgstr ""

#: fdisk/sfdisk.c:2058
msgid "too many input fields\n"
msgstr ""

#: fdisk/sfdisk.c:2092
msgid "No room for more\n"
msgstr ""

#: fdisk/sfdisk.c:2111
msgid "Illegal type\n"
msgstr ""

#: fdisk/sfdisk.c:2145
#, c-format
msgid "Warning: given size (%lu) exceeds max allowable size (%lu)\n"
msgstr ""

#: fdisk/sfdisk.c:2151
msgid "Warning: empty partition\n"
msgstr ""

#: fdisk/sfdisk.c:2165
#, c-format
msgid "Warning: bad partition start (earliest %lu)\n"
msgstr ""

#: fdisk/sfdisk.c:2178
msgid "unrecognized bootable flag - choose - or *\n"
msgstr ""

#: fdisk/sfdisk.c:2195 fdisk/sfdisk.c:2209
msgid "partial c,h,s specification?\n"
msgstr ""

#: fdisk/sfdisk.c:2220
msgid "Extended partition not where expected\n"
msgstr ""

#: fdisk/sfdisk.c:2252
msgid "bad input\n"
msgstr ""

#: fdisk/sfdisk.c:2275
msgid "too many partitions\n"
msgstr ""

#: fdisk/sfdisk.c:2308
msgid ""
"Input in the following format; absent fields get a default value.\n"
"<start> <size> <type [E,S,L,X,hex]> <bootable [-,*]> <c,h,s> <c,h,s>\n"
"Usually you only need to specify <start> and <size> (and perhaps <type>).\n"
msgstr ""

#: fdisk/sfdisk.c:2328 getopt/getopt.c:314 hwclock/hwclock.c:1374
#: misc-utils/cal.c:786 misc-utils/logger.c:138 misc-utils/look.c:366
#: misc-utils/mcookie.c:66 misc-utils/namei.c:411 misc-utils/rename.c:64
#: misc-utils/uuidd.c:54 misc-utils/uuidgen.c:33 misc-utils/whereis.c:132
#: misc-utils/wipefs.c:303 mount/lomount.c:1015 mount/swapon.c:103
#: mount/swapon.c:124 partx/partx.c:581 sys-utils/dmesg.c:132
#: sys-utils/fallocate.c:53 sys-utils/flock.c:65 sys-utils/fsfreeze.c:40
#: sys-utils/fstrim.c:55 sys-utils/ipcmk.c:86 sys-utils/ldattach.c:149
#: sys-utils/lscpu.c:1036 sys-utils/mountpoint.c:79 sys-utils/renice.c:54
#: sys-utils/rtcwake.c:86 sys-utils/unshare.c:57 term-utils/mesg.c:68
#: term-utils/script.c:130 term-utils/scriptreplay.c:39
#: term-utils/setterm.c:675 term-utils/wall.c:87 term-utils/write.c:78
#, fuzzy
msgid ""
"\n"
"Usage:\n"
msgstr "用法:\n"

#: fdisk/sfdisk.c:2330
#, fuzzy, c-format
msgid " %s [options] <device> [...]\n"
msgstr "用法: %s [ -n ] device\n"

#: fdisk/sfdisk.c:2332 getopt/getopt.c:322 hwclock/hwclock.c:1394
#: misc-utils/cal.c:791 misc-utils/logger.c:142 misc-utils/look.c:370
#: misc-utils/mcookie.c:70 misc-utils/namei.c:415 misc-utils/rename.c:69
#: misc-utils/uuidd.c:58 misc-utils/uuidgen.c:37 misc-utils/whereis.c:136
#: misc-utils/wipefs.c:307 mount/lomount.c:1026 mount/swapon.c:106
#: mount/swapon.c:127 partx/partx.c:586 sys-utils/dmesg.c:136
#: sys-utils/fallocate.c:57 sys-utils/flock.c:71 sys-utils/fsfreeze.c:44
#: sys-utils/fstrim.c:59 sys-utils/ipcmk.c:90 sys-utils/lscpu.c:1040
#: sys-utils/mountpoint.c:84 sys-utils/renice.c:61 sys-utils/rtcwake.c:90
#: sys-utils/unshare.c:61 term-utils/mesg.c:72 term-utils/script.c:134
#: term-utils/scriptreplay.c:44 term-utils/setterm.c:679 term-utils/wall.c:91
#: term-utils/write.c:83 text-utils/column.c:91
#, c-format
msgid ""
"\n"
"Options:\n"
msgstr ""

#: fdisk/sfdisk.c:2333
msgid ""
" -s, --show-size           list size of a partition\n"
" -c, --id                  change or print partition Id\n"
"     --change-id           change Id\n"
"     --print-id            print Id\n"
msgstr ""

#: fdisk/sfdisk.c:2337
msgid ""
" -l, --list                list partitions of each device\n"
" -d, --dump                idem, but in a format suitable for later input\n"
" -i, --increment           number cylinders etc. from 1 instead of from 0\n"
" -u, --unit <letter>       units to be used; <letter> can be one of\n"
"                             S (sectors), C (cylinders), B (blocks), or M "
"(MB)\n"
msgstr ""

#: fdisk/sfdisk.c:2342
msgid ""
" -1, --one-only            reserved option that does nothing currently\n"
" -T, --list-types          list the known partition types\n"
" -D, --DOS                 for DOS-compatibility: waste a little space\n"
" -E, --DOS-extended        DOS extended partition compatibility\n"
" -R, --re-read             make the kernel reread the partition table\n"
msgstr ""

#: fdisk/sfdisk.c:2347
msgid ""
" -N <number>               change only the partition with this <number>\n"
" -n                        do not actually write to disk\n"
" -O <file>                 save the sectors that will be overwritten to "
"<file>\n"
" -I <file>                 restore sectors from <file>\n"
msgstr ""

#: fdisk/sfdisk.c:2351
msgid ""
" -V, --verify              check that the listed partitions are reasonable\n"
" -v, --version             display version information and exit\n"
" -h, --help                display this help text and exit\n"
msgstr ""

#: fdisk/sfdisk.c:2355
#, fuzzy
msgid ""
"\n"
"Dangerous options:\n"
msgstr "用法: %s [ -n ] device\n"

#: fdisk/sfdisk.c:2356
msgid ""
" -f, --force               disable all consistency checking\n"
"     --no-reread           do not check whether the partition is in use\n"
" -q, --quiet               suppress warning messages\n"
" -L, --Linux               do not complain about things irrelevant for "
"Linux\n"
msgstr ""

#: fdisk/sfdisk.c:2360
msgid ""
" -g, --show-geometry       print the kernel's idea of the geometry\n"
" -G, --show-pt-geometry    print geometry guessed from the partition table\n"
msgstr ""

#: fdisk/sfdisk.c:2362
msgid ""
" -A, --activate[=<device>] activate bootable flag\n"
" -U, --unhide[=<dev>]      set partition unhidden\n"
" -x, --show-extended       also list extended partitions in the output,\n"
"                             or expect descriptors for them in the input\n"
msgstr ""

#: fdisk/sfdisk.c:2366
msgid ""
"     --leave-last          do not allocate the last cylinder\n"
"     --IBM                 same as --leave-last\n"
msgstr ""

#: fdisk/sfdisk.c:2368
msgid ""
"     --in-order            partitions are in order\n"
"     --not-in-order        partitions are not in order\n"
"     --inside-outer        all logicals inside outermost extended\n"
"     --not-inside-outer    not all logicals inside outermost extended\n"
msgstr ""

#: fdisk/sfdisk.c:2372
msgid ""
"     --nested              every partition is disjoint from all others\n"
"     --chained             like nested, but extended partitions may lie "
"outside\n"
"     --onesector           partitions are mutually disjoint\n"
msgstr ""

#: fdisk/sfdisk.c:2376
msgid ""
"\n"
"Override the detected geometry using:\n"
" -C, --cylinders <number>  set the number of cylinders to use\n"
" -H, --heads <number>      set the number of heads to use\n"
" -S, --sectors <number>    set the number of sectors to use\n"
"\n"
msgstr ""

#: fdisk/sfdisk.c:2386
msgid "Usage:"
msgstr ""

#: fdisk/sfdisk.c:2387
#, c-format
msgid "%s device\t\t list active partitions on device\n"
msgstr ""

#: fdisk/sfdisk.c:2388
#, c-format
msgid "%s device n1 n2 ... activate partitions n1 ..., inactivate the rest\n"
msgstr ""

#: fdisk/sfdisk.c:2390
#, c-format
msgid "%s -An device\t activate partition n, inactivate the other ones\n"
msgstr ""

#: fdisk/sfdisk.c:2519
#, c-format
msgid ""
"\n"
"WARNING: GPT (GUID Partition Table) detected on '%s'! The util sfdisk "
"doesn't support GPT. Use GNU Parted.\n"
"\n"
msgstr ""

#: fdisk/sfdisk.c:2524
#, c-format
msgid "Use the --force flag to overrule this check.\n"
msgstr ""

#: fdisk/sfdisk.c:2563
msgid "no command?\n"
msgstr ""

#: fdisk/sfdisk.c:2733
#, c-format
msgid "total: %llu blocks\n"
msgstr ""

#: fdisk/sfdisk.c:2776
msgid "usage: sfdisk --print-id device partition-number\n"
msgstr ""

#: fdisk/sfdisk.c:2778
msgid "usage: sfdisk --change-id device partition-number Id\n"
msgstr ""

#: fdisk/sfdisk.c:2780
msgid "usage: sfdisk --id device partition-number [Id]\n"
msgstr ""

#: fdisk/sfdisk.c:2787
msgid "can specify only one device (except with -l or -s)\n"
msgstr ""

#: fdisk/sfdisk.c:2813
#, c-format
msgid "cannot open %s read-write\n"
msgstr ""

#: fdisk/sfdisk.c:2815
#, c-format
msgid "cannot open %s for reading\n"
msgstr ""

#: fdisk/sfdisk.c:2859 fdisk/sfdisk.c:2891
#, c-format
msgid "%s: %ld cylinders, %ld heads, %ld sectors/track\n"
msgstr ""

#: fdisk/sfdisk.c:2910
#, c-format
msgid "Cannot get size of %s\n"
msgstr ""

#: fdisk/sfdisk.c:2990
#, c-format
msgid "bad active byte: 0x%x instead of 0x80\n"
msgstr ""

#: fdisk/sfdisk.c:3009 fdisk/sfdisk.c:3066 fdisk/sfdisk.c:3099
msgid ""
"Done\n"
"\n"
msgstr ""

#: fdisk/sfdisk.c:3018
#, c-format
msgid ""
"You have %d active primary partitions. This does not matter for LILO,\n"
"but the DOS MBR will only boot a disk with 1 active partition.\n"
msgstr ""

#: fdisk/sfdisk.c:3035
#, c-format
msgid "partition %s has id %x and is not hidden\n"
msgstr ""

#: fdisk/sfdisk.c:3095
#, c-format
msgid "Bad Id %lx\n"
msgstr ""

#: fdisk/sfdisk.c:3112
msgid "This disk is currently in use.\n"
msgstr ""

#: fdisk/sfdisk.c:3133
#, c-format
msgid "Fatal error: cannot find %s\n"
msgstr ""

#: fdisk/sfdisk.c:3136
#, c-format
msgid "Warning: %s is not a block device\n"
msgstr ""

#: fdisk/sfdisk.c:3142
msgid "Checking that no-one is using this disk right now ...\n"
msgstr ""

#: fdisk/sfdisk.c:3144
msgid ""
"\n"
"This disk is currently in use - repartitioning is probably a bad idea.\n"
"Umount all file systems, and swapoff all swap partitions on this disk.\n"
"Use the --no-reread flag to suppress this check.\n"
msgstr ""

#: fdisk/sfdisk.c:3148
msgid "Use the --force flag to overrule all checks.\n"
msgstr ""

#: fdisk/sfdisk.c:3152
msgid "OK\n"
msgstr ""

#: fdisk/sfdisk.c:3161
#, c-format
msgid "Old situation:\n"
msgstr ""

#: fdisk/sfdisk.c:3165
#, c-format
msgid "Partition %d does not exist, cannot change it\n"
msgstr ""

#: fdisk/sfdisk.c:3173
#, c-format
msgid "New situation:\n"
msgstr ""

#: fdisk/sfdisk.c:3178
msgid ""
"I don't like these partitions - nothing changed.\n"
"(If you really want this, use the --force option.)\n"
msgstr ""

#: fdisk/sfdisk.c:3181
msgid "I don't like this - probably you should answer No\n"
msgstr ""

#: fdisk/sfdisk.c:3186
#, c-format
msgid "Are you satisfied with this? [ynq] "
msgstr ""

#: fdisk/sfdisk.c:3188
#, c-format
msgid "Do you want to write this to disk? [ynq] "
msgstr ""

#: fdisk/sfdisk.c:3193
#, c-format
msgid ""
"\n"
"sfdisk: premature end of input\n"
msgstr ""

#: fdisk/sfdisk.c:3195
msgid "Quitting - nothing changed\n"
msgstr ""

#: fdisk/sfdisk.c:3201
#, c-format
msgid "Please answer one of y,n,q\n"
msgstr ""

#: fdisk/sfdisk.c:3209
#, c-format
msgid ""
"Successfully wrote the new partition table\n"
"\n"
msgstr ""

#: fdisk/sfdisk.c:3216
msgid ""
"If you created or changed a DOS partition, /dev/foo7, say, then use dd(1)\n"
"to zero the first 512 bytes:  dd if=/dev/zero of=/dev/foo7 bs=512 count=1\n"
"(See fdisk(8).)\n"
msgstr ""

#: fsck/fsck.c:253 sys-utils/lscpu.c:242 sys-utils/lscpu.c:263
#: sys-utils/lscpu.c:295
#, fuzzy, c-format
msgid "failed to read: %s"
msgstr "不能读 inodes"

#: fsck/fsck.c:255 sys-utils/lscpu.c:265
#, c-format
msgid "parse error: %s"
msgstr ""

#: fsck/fsck.c:275
#, c-format
msgid "Locking disk %s ... "
msgstr ""

#: fsck/fsck.c:285
#, c-format
msgid "(waiting) "
msgstr ""

#. TRANSLATORS: These are followups to "Locking disk...".
#: fsck/fsck.c:295
#, fuzzy
msgid "succeeded"
msgstr "%s 成功.\n"

#: fsck/fsck.c:295
#, fuzzy
msgid "failed"
msgstr "%s 失败.\n"

#: fsck/fsck.c:424
#, c-format
msgid "WARNING: couldn't open %s"
msgstr ""

#: fsck/fsck.c:433
#, c-format
msgid "WARNING: bad format on line %d of %s"
msgstr ""

#: fsck/fsck.c:449
msgid ""
"WARNING: Your /etc/fstab does not contain the fsck passno\n"
"\tfield.  I will kludge around things for you, but you\n"
"\tshould fix your /etc/fstab file as soon as you can.\n"
msgstr ""

#: fsck/fsck.c:554
#, fuzzy, c-format
msgid "%s: not found"
msgstr "%s: 不能打开 %s\n"

#: fsck/fsck.c:674
msgid "wait: no more child process?!?"
msgstr ""

#: fsck/fsck.c:695
#, c-format
msgid "Warning... %s for device %s exited with signal %d."
msgstr ""

#: fsck/fsck.c:701
#, c-format
msgid "%s %s: status is %x, should never happen."
msgstr ""

#: fsck/fsck.c:740
#, c-format
msgid "Finished with %s (exit status %d)\n"
msgstr ""

#: fsck/fsck.c:800
#, c-format
msgid "error %d while executing fsck.%s for %s"
msgstr ""

#: fsck/fsck.c:871
msgid ""
"Either all or none of the filesystem types passed to -t must be prefixed\n"
"with 'no' or '!'."
msgstr ""

#: fsck/fsck.c:972
#, c-format
msgid ""
"%s: skipping bad line in /etc/fstab: bind mount with nonzero fsck pass number"
msgstr ""

#: fsck/fsck.c:984
#, c-format
msgid "%s: skipping nonexistent device\n"
msgstr ""

#: fsck/fsck.c:989
#, c-format
msgid ""
"%s: nonexistent device (\"nofail\" fstab option may be used to skip this "
"device)\n"
msgstr ""

#: fsck/fsck.c:1016
#, c-format
msgid "cannot check %s: fsck.%s not found"
msgstr ""

#: fsck/fsck.c:1102
msgid "Checking all file systems.\n"
msgstr ""

#: fsck/fsck.c:1193
#, c-format
msgid "--waiting-- (pass %d)\n"
msgstr ""

#: fsck/fsck.c:1213
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [fsck-options] [fs-options] [filesys ...]\n"
msgstr "用法: %s [ -n ] device\n"

#: fsck/fsck.c:1217
msgid ""
"\n"
"Options:\n"
" -A         check all filesystems\n"
" -R         skip root filesystem; useful only with `-A'\n"
" -M         do not check mounted filesystems\n"
" -t <type>  specify filesystem types to be checked;\n"
"              type is allowed to be comma-separated list\n"
" -P         check filesystems in parallel, including root\n"
" -s         serialize fsck operations\n"
" -l         lock the device using flock()\n"
" -N         do not execute, just show what would be done\n"
" -T         do not show the title on startup\n"
" -C <fd>    display progress bar; file descriptor is for GUIs\n"
" -V         explain what is being done\n"
" -?         display this help and exit\n"
"\n"
"See fsck.* commands for fs-options."
msgstr ""

#: fsck/fsck.c:1268
#, fuzzy
msgid "too many devices"
msgstr "%s:不是一个块设备\n"

#: fsck/fsck.c:1276
#, fuzzy, c-format
msgid "couldn't open %s"
msgstr "%s: 不能打开 %s\n"

#: fsck/fsck.c:1278
#, fuzzy
msgid "Is /proc mounted?"
msgstr "%s 已经挂载.\t"

#: fsck/fsck.c:1286
#, c-format
msgid "must be root to scan for matching filesystems: %s"
msgstr ""

#: fsck/fsck.c:1290
#, c-format
msgid "couldn't find matching filesystem: %s"
msgstr ""

#: fsck/fsck.c:1298 fsck/fsck.c:1383
#, fuzzy
msgid "too many arguments"
msgstr "%s 需要一个参数\n"

#: fsck/fsck.c:1436
msgid "the -l option can be used with one device only -- ignore"
msgstr ""

#: getopt/getopt.c:219
#, c-format
msgid "Try `%s --help' for more information.\n"
msgstr ""

#: getopt/getopt.c:288
msgid "empty long option after -l or --long argument"
msgstr ""

#: getopt/getopt.c:309
msgid "unknown shell after -s or --shell argument"
msgstr ""

#: getopt/getopt.c:317
#, c-format
msgid ""
" %1$s optstring parameters\n"
" %1$s [options] [--] optstring parameters\n"
" %1$s [options] -o|--options optstring [options] [--] parameters\n"
msgstr ""

#: getopt/getopt.c:323
msgid ""
" -a, --alternative            Allow long options starting with single -\n"
msgstr ""

#: getopt/getopt.c:324
msgid " -h, --help                   This small usage guide\n"
msgstr ""

#: getopt/getopt.c:325
msgid " -l, --longoptions <longopts> Long options to be recognized\n"
msgstr ""

#: getopt/getopt.c:326
msgid ""
" -n, --name <progname>        The name under which errors are reported\n"
msgstr ""

#: getopt/getopt.c:327
msgid " -o, --options <optstring>    Short options to be recognized\n"
msgstr ""

#: getopt/getopt.c:328
msgid " -q, --quiet                  Disable error reporting by getopt(3)\n"
msgstr ""

#: getopt/getopt.c:329
msgid " -Q, --quiet-output           No normal output\n"
msgstr ""

#: getopt/getopt.c:330
msgid " -s, --shell <shell>          Set shell quoting conventions\n"
msgstr ""

#: getopt/getopt.c:331
msgid " -T, --test                   Test for getopt(1) version\n"
msgstr ""

#: getopt/getopt.c:332
msgid " -u, --unquote                Do not quote the output\n"
msgstr ""

#: getopt/getopt.c:333
msgid " -V, --version                Output version information\n"
msgstr ""

#: getopt/getopt.c:382 getopt/getopt.c:443
msgid "missing optstring argument"
msgstr ""

#: getopt/getopt.c:438
msgid "internal error, contact the author."
msgstr ""

#: hwclock/cmos.c:217
#, c-format
msgid "booted from MILO\n"
msgstr ""

#: hwclock/cmos.c:229
#, c-format
msgid "Ruffian BCD clock\n"
msgstr ""

#: hwclock/cmos.c:248
#, c-format
msgid "clockport adjusted to 0x%x\n"
msgstr ""

#: hwclock/cmos.c:264
#, c-format
msgid "funky TOY!\n"
msgstr ""

#: hwclock/cmos.c:292
#, c-format
msgid "atomic %s failed for 1000 iterations!"
msgstr ""

#: hwclock/cmos.c:319
#, c-format
msgid "cmos_read(): write to control address %X failed: %s\n"
msgstr ""

#: hwclock/cmos.c:324
#, c-format
msgid "cmos_read(): read data address %X failed: %s\n"
msgstr ""

#: hwclock/cmos.c:362
#, c-format
msgid "cmos_write(): write to control address %X failed: %s\n"
msgstr ""

#: hwclock/cmos.c:368
#, c-format
msgid "cmos_write(): write to data address %X failed: %s\n"
msgstr ""

#: hwclock/cmos.c:637
msgid "Cannot open /dev/port"
msgstr ""

#: hwclock/cmos.c:644
#, fuzzy
msgid "I failed to get permission because I didn't try."
msgstr "在 write_block 中查找失败"

#: hwclock/cmos.c:647
msgid "unable to get I/O port access:  the iopl(3) call failed."
msgstr ""

#: hwclock/cmos.c:650
msgid "Probably you need root privileges.\n"
msgstr ""

#: hwclock/hwclock.c:169
#, fuzzy, c-format
msgid "cannot write %s"
msgstr "不能写 inodes"

#: hwclock/hwclock.c:238
#, c-format
msgid "Assuming hardware clock is kept in %s time.\n"
msgstr ""

#: hwclock/hwclock.c:239 hwclock/hwclock.c:329
msgid "UTC"
msgstr ""

#: hwclock/hwclock.c:239 hwclock/hwclock.c:328
msgid "local"
msgstr ""

#: hwclock/hwclock.c:313
msgid ""
"Warning: unrecognized third line in adjtime file\n"
"(Expected: `UTC' or `LOCAL' or nothing.)"
msgstr ""

#: hwclock/hwclock.c:322
#, c-format
msgid "Last drift adjustment done at %ld seconds after 1969\n"
msgstr ""

#: hwclock/hwclock.c:324
#, c-format
msgid "Last calibration done at %ld seconds after 1969\n"
msgstr ""

#: hwclock/hwclock.c:326
#, c-format
msgid "Hardware clock is on %s time\n"
msgstr ""

#: hwclock/hwclock.c:329 misc-utils/findmnt.c:373 schedutils/ionice.c:78
msgid "unknown"
msgstr ""

#: hwclock/hwclock.c:353
#, c-format
msgid "Waiting for clock tick...\n"
msgstr ""

#: hwclock/hwclock.c:359
#, c-format
msgid "...synchronization failed\n"
msgstr ""

#: hwclock/hwclock.c:361
#, c-format
msgid "...got clock tick\n"
msgstr ""

#: hwclock/hwclock.c:417
#, c-format
msgid "Invalid values in hardware clock: %4d/%.2d/%.2d %.2d:%.2d:%.2d\n"
msgstr ""

#: hwclock/hwclock.c:426
#, c-format
msgid "Hw clock time : %4d/%.2d/%.2d %.2d:%.2d:%.2d = %ld seconds since 1969\n"
msgstr ""

#: hwclock/hwclock.c:460
#, c-format
msgid "Time read from Hardware Clock: %4d/%.2d/%.2d %02d:%02d:%02d\n"
msgstr ""

#: hwclock/hwclock.c:488
#, c-format
msgid "Setting Hardware Clock to %.2d:%.2d:%.2d = %ld seconds since 1969\n"
msgstr ""

#: hwclock/hwclock.c:494
#, c-format
msgid "Clock not changed - testing only.\n"
msgstr ""

#: hwclock/hwclock.c:552
#, c-format
msgid ""
"Time elapsed since reference time has been %.6f seconds.\n"
"Delaying further to reach the new time.\n"
msgstr ""

#: hwclock/hwclock.c:588
msgid ""
"The Hardware Clock registers contain values that are either invalid (e.g. "
"50th day of month) or beyond the range we can handle (e.g. Year 2095)."
msgstr ""

#: hwclock/hwclock.c:598
#, c-format
msgid "%s  %.6f seconds\n"
msgstr ""

#: hwclock/hwclock.c:629
msgid "No --date option specified."
msgstr ""

#: hwclock/hwclock.c:635
msgid "--date argument too long"
msgstr ""

#: hwclock/hwclock.c:642
msgid ""
"The value of the --date option is not a valid date.\n"
"In particular, it contains quotation marks."
msgstr ""

#: hwclock/hwclock.c:650
#, c-format
msgid "Issuing date command: %s\n"
msgstr ""

#: hwclock/hwclock.c:654
msgid "Unable to run 'date' program in /bin/sh shell. popen() failed"
msgstr ""

#: hwclock/hwclock.c:662
#, c-format
msgid "response from date command = %s\n"
msgstr ""

#: hwclock/hwclock.c:664
#, c-format
msgid ""
"The date command issued by %s returned unexpected results.\n"
"The command was:\n"
"  %s\n"
"The response was:\n"
"  %s"
msgstr ""

#: hwclock/hwclock.c:675
#, c-format
msgid ""
"The date command issued by %s returned something other than an integer where "
"the converted time value was expected.\n"
"The command was:\n"
"  %s\n"
"The response was:\n"
" %s\n"
msgstr ""

#: hwclock/hwclock.c:687
#, c-format
msgid "date string %s equates to %ld seconds since 1969.\n"
msgstr ""

#: hwclock/hwclock.c:719
msgid ""
"The Hardware Clock does not contain a valid time, so we cannot set the "
"System Time from it."
msgstr ""

#: hwclock/hwclock.c:741 hwclock/hwclock.c:822
#, c-format
msgid "Calling settimeofday:\n"
msgstr ""

#: hwclock/hwclock.c:742 hwclock/hwclock.c:824
#, c-format
msgid "\ttv.tv_sec = %ld, tv.tv_usec = %ld\n"
msgstr ""

#: hwclock/hwclock.c:744 hwclock/hwclock.c:826
#, c-format
msgid "\ttz.tz_minuteswest = %d\n"
msgstr ""

#: hwclock/hwclock.c:748 hwclock/hwclock.c:830
#, c-format
msgid "Not setting system clock because running in test mode.\n"
msgstr ""

#: hwclock/hwclock.c:757 hwclock/hwclock.c:839
msgid "Must be superuser to set system clock."
msgstr ""

#: hwclock/hwclock.c:760 hwclock/hwclock.c:842
msgid "settimeofday() failed"
msgstr ""

#: hwclock/hwclock.c:797
#, c-format
msgid "Current system time: %ld = %s\n"
msgstr ""

#: hwclock/hwclock.c:823
#, c-format
msgid "\tUTC: %s\n"
msgstr ""

#: hwclock/hwclock.c:871
#, c-format
msgid ""
"Not adjusting drift factor because the Hardware Clock previously contained "
"garbage.\n"
msgstr ""

#: hwclock/hwclock.c:876
#, c-format
msgid ""
"Not adjusting drift factor because last calibration time is zero,\n"
"so history is bad and calibration startover is necessary.\n"
msgstr ""

#: hwclock/hwclock.c:882
#, c-format
msgid ""
"Not adjusting drift factor because it has been less than a day since the "
"last calibration.\n"
msgstr ""

#: hwclock/hwclock.c:930
#, c-format
msgid ""
"Clock drifted %.1f seconds in the past %d seconds in spite of a drift factor "
"of %f seconds/day.\n"
"Adjusting drift factor by %f seconds/day\n"
msgstr ""

#: hwclock/hwclock.c:976
#, c-format
msgid "Time since last adjustment is %d seconds\n"
msgstr ""

#: hwclock/hwclock.c:978
#, c-format
msgid "Need to insert %d seconds and refer time back %.6f seconds ago\n"
msgstr ""

#: hwclock/hwclock.c:1008
#, c-format
msgid "Not updating adjtime file because of testing mode.\n"
msgstr ""

#: hwclock/hwclock.c:1009
#, c-format
msgid ""
"Would have written the following to %s:\n"
"%s"
msgstr ""

#: hwclock/hwclock.c:1018
#, c-format
msgid ""
"Could not open file with the clock adjustment parameters in it (%s) for "
"writing"
msgstr ""

#: hwclock/hwclock.c:1024 hwclock/hwclock.c:1031
#, c-format
msgid "Could not update file with the clock adjustment parameters (%s) in it"
msgstr ""

#: hwclock/hwclock.c:1039
msgid "Drift adjustment parameters not updated."
msgstr ""

#: hwclock/hwclock.c:1078
msgid ""
"The Hardware Clock does not contain a valid time, so we cannot adjust it."
msgstr ""

#: hwclock/hwclock.c:1087
#, c-format
msgid ""
"Not setting clock because last adjustment time is zero, so history is bad."
msgstr ""

#: hwclock/hwclock.c:1109
#, c-format
msgid "Needed adjustment is less than one second, so not setting clock.\n"
msgstr ""

#: hwclock/hwclock.c:1134
#, c-format
msgid "Using %s.\n"
msgstr ""

#: hwclock/hwclock.c:1136
#, c-format
msgid "No usable clock interface found.\n"
msgstr ""

#: hwclock/hwclock.c:1266 hwclock/hwclock.c:1272
#, c-format
msgid "Unable to set system clock.\n"
msgstr ""

#: hwclock/hwclock.c:1285
#, c-format
msgid ""
"At %ld seconds after 1969, RTC is predicted to read %ld seconds after 1969.\n"
msgstr ""

#: hwclock/hwclock.c:1314
msgid ""
"The kernel keeps an epoch value for the Hardware Clock only on an Alpha "
"machine.\n"
"This copy of hwclock was built for a machine other than Alpha\n"
"(and thus is presumably not running on an Alpha now).  No action taken."
msgstr ""

#: hwclock/hwclock.c:1331
msgid "Unable to get the epoch value from the kernel."
msgstr ""

#: hwclock/hwclock.c:1333
#, c-format
msgid "Kernel is assuming an epoch value of %lu\n"
msgstr ""

#: hwclock/hwclock.c:1338
msgid ""
"To set the epoch value, you must use the 'epoch' option to tell to what "
"value to set it."
msgstr ""

#: hwclock/hwclock.c:1342
#, c-format
msgid "Not setting the epoch to %d - testing only.\n"
msgstr ""

#: hwclock/hwclock.c:1346
#, c-format
msgid "Unable to set the epoch value in the kernel.\n"
msgstr ""

#: hwclock/hwclock.c:1375
msgid " hwclock [function] [option...]\n"
msgstr ""

#: hwclock/hwclock.c:1377
msgid ""
"\n"
"Functions:\n"
msgstr ""

#: hwclock/hwclock.c:1378
msgid ""
" -h, --help           show this help text and exit\n"
" -r, --show           read hardware clock and print result\n"
"     --set            set the RTC to the time given with --date\n"
msgstr ""

#: hwclock/hwclock.c:1381
msgid ""
" -s, --hctosys        set the system time from the hardware clock\n"
" -w, --systohc        set the hardware clock from the current system time\n"
"     --systz          set the system time based on the current timezone\n"
"     --adjust         adjust the RTC to account for systematic drift since\n"
"                        the clock was last set or adjusted\n"
msgstr ""

#: hwclock/hwclock.c:1387
msgid ""
"     --getepoch       print out the kernel's hardware clock epoch value\n"
"     --setepoch       set the kernel's hardware clock epoch value to the \n"
"                        value given with --epoch\n"
msgstr ""

#: hwclock/hwclock.c:1391
msgid ""
"     --predict        predict RTC reading at time given with --date\n"
" -V, --version        display version information and exit\n"
msgstr ""

#: hwclock/hwclock.c:1395
msgid ""
" -u, --utc            the hardware clock is kept in UTC\n"
"     --localtime      the hardware clock is kept in local time\n"
msgstr ""

#: hwclock/hwclock.c:1398
msgid " -f, --rtc <file>     special /dev/... file to use instead of default\n"
msgstr ""

#: hwclock/hwclock.c:1401
#, c-format
msgid ""
"     --directisa      access the ISA bus directly instead of %s\n"
"     --badyear        ignore RTC's year because the BIOS is broken\n"
"     --date <time>    specifies the time to which to set the hardware clock\n"
"     --epoch <year>   specifies the year which is the beginning of the\n"
"                        hardware clock's epoch value\n"
msgstr ""

#: hwclock/hwclock.c:1407
#, c-format
msgid ""
"     --noadjfile      do not access %s; this requires the use of\n"
"                        either --utc or --localtime\n"
"     --adjfile <file> specifies the path to the adjust file;\n"
"                        the default is %s\n"
msgstr ""

#: hwclock/hwclock.c:1411
msgid ""
"     --test           do not update anything, just show what would happen\n"
" -D, --debug          debugging mode\n"
"\n"
msgstr ""

#: hwclock/hwclock.c:1414
msgid ""
" -J|--jensen, -A|--arc, -S|--srm, -F|--funky-toy\n"
"      tell hwclock the type of Alpha you have (see hwclock(8))\n"
"\n"
msgstr ""

#: hwclock/hwclock.c:1511
msgid "Unable to connect to audit system"
msgstr ""

#: hwclock/hwclock.c:1602
#, fuzzy
msgid "failed to parse epoch"
msgstr "不能读 inodes"

#: hwclock/hwclock.c:1641
#, c-format
msgid "%s takes no non-option arguments.  You supplied %d.\n"
msgstr ""

#: hwclock/hwclock.c:1648
msgid ""
"You have specified multiple functions.\n"
"You can only perform one function at a time."
msgstr ""

#: hwclock/hwclock.c:1654
msgid ""
"The --utc and --localtime options are mutually exclusive.  You specified "
"both."
msgstr ""

#: hwclock/hwclock.c:1660
msgid ""
"The --adjust and --noadjfile options are mutually exclusive.  You specified "
"both."
msgstr ""

#: hwclock/hwclock.c:1666
msgid ""
"The --adjfile and --noadjfile options are mutually exclusive.  You specified "
"both."
msgstr ""

#: hwclock/hwclock.c:1674
msgid "With --noadjfile, you must specify either --utc or --localtime"
msgstr ""

#: hwclock/hwclock.c:1687
msgid "No usable set-to time.  Cannot set clock."
msgstr ""

#: hwclock/hwclock.c:1702
msgid "Sorry, only the superuser can change the Hardware Clock."
msgstr ""

#: hwclock/hwclock.c:1706
msgid "Sorry, only the superuser can change the System Clock."
msgstr ""

#: hwclock/hwclock.c:1710
msgid ""
"Sorry, only the superuser can change the Hardware Clock epoch in the kernel."
msgstr ""

#: hwclock/hwclock.c:1733
msgid "Cannot access the Hardware Clock via any known method."
msgstr ""

#: hwclock/hwclock.c:1736
msgid ""
"Use the --debug option to see the details of our search for an access method."
msgstr ""

#: hwclock/kd.c:49
#, c-format
msgid "Waiting in loop for time from KDGHWCLK to change\n"
msgstr ""

#: hwclock/kd.c:52
msgid "KDGHWCLK ioctl to read time failed"
msgstr ""

#: hwclock/kd.c:74
msgid "KDGHWCLK ioctl to read time failed in loop"
msgstr ""

#: hwclock/kd.c:81 hwclock/rtc.c:235
msgid "Timed out waiting for time change."
msgstr ""

#: hwclock/kd.c:100
#, c-format
msgid "ioctl() failed to read time from %s"
msgstr ""

#: hwclock/kd.c:136
msgid "ioctl KDSHWCLK failed"
msgstr ""

#: hwclock/kd.c:172
msgid "Can't open /dev/tty1 or /dev/vc/1"
msgstr ""

#: hwclock/kd.c:176
msgid "KDGHWCLK ioctl failed"
msgstr ""

#: hwclock/rtc.c:161 hwclock/rtc.c:255
#, c-format
msgid "open() of %s failed"
msgstr ""

#: hwclock/rtc.c:194
#, fuzzy, c-format
msgid "ioctl(%s) to %s to read the time failed"
msgstr "查找失败"

#: hwclock/rtc.c:216
#, c-format
msgid "Waiting in loop for time from %s to change\n"
msgstr ""

#: hwclock/rtc.c:279
#, c-format
msgid "%s does not have interrupt functions. "
msgstr ""

#: hwclock/rtc.c:291
#, c-format
msgid "read() to %s to wait for clock tick failed"
msgstr ""

#: hwclock/rtc.c:316
#, c-format
msgid "select() to %s to wait for clock tick failed"
msgstr ""

#: hwclock/rtc.c:320
#, c-format
msgid "select() to %s to wait for clock tick timed out"
msgstr ""

#: hwclock/rtc.c:330
#, c-format
msgid "ioctl() to %s to turn off update interrupts failed"
msgstr ""

#: hwclock/rtc.c:334
#, c-format
msgid "ioctl() to %s to turn on update interrupts failed unexpectedly"
msgstr ""

#: hwclock/rtc.c:388
#, c-format
msgid "ioctl(%s) to %s to set the time failed."
msgstr ""

#: hwclock/rtc.c:394
#, c-format
msgid "ioctl(%s) was successful.\n"
msgstr ""

#: hwclock/rtc.c:419
#, c-format
msgid "Open of %s failed"
msgstr ""

#: hwclock/rtc.c:435 hwclock/rtc.c:482
#, c-format
msgid ""
"To manipulate the epoch value in the kernel, we must access the Linux 'rtc' "
"device driver via the device special file %s.  This file does not exist on "
"this system."
msgstr ""

#: hwclock/rtc.c:440 hwclock/rtc.c:487
#, c-format
msgid "Unable to open %s"
msgstr ""

#: hwclock/rtc.c:447
#, c-format
msgid "ioctl(RTC_EPOCH_READ) to %s failed"
msgstr ""

#: hwclock/rtc.c:453
#, c-format
msgid "we have read epoch %ld from %s with RTC_EPOCH_READ ioctl.\n"
msgstr ""

#: hwclock/rtc.c:473
#, c-format
msgid "The epoch value may not be less than 1900.  You requested %ld"
msgstr ""

#: hwclock/rtc.c:492
#, c-format
msgid "setting epoch to %ld with RTC_EPOCH_SET ioctl to %s.\n"
msgstr ""

#: hwclock/rtc.c:498
#, c-format
msgid "The kernel device driver for %s does not have the RTC_EPOCH_SET ioctl."
msgstr ""

#: hwclock/rtc.c:502
#, c-format
msgid "ioctl(RTC_EPOCH_SET) to %s failed"
msgstr ""

#: libmount/samples/mount.c:60
#, c-format
msgid "only root can use \"--%s\" option (effective UID is %u)"
msgstr ""

#: libmount/samples/mount.c:63
#, c-format
msgid "only root can do that (effective UID is %u)"
msgstr ""

#: libmount/samples/mount.c:67
#, c-format
msgid "only root can use \"--%s\" option"
msgstr ""

#: libmount/samples/mount.c:68
msgid "only root can do that"
msgstr ""

#: libmount/samples/mount.c:86
#, fuzzy, c-format
msgid "%s: parse error: ignore entry at line %d."
msgstr "%s: %s ioctl 错误\n"

#: libmount/samples/mount.c:109
#, fuzzy
msgid "failed to read mtab"
msgstr "不能读 inodes"

#: libmount/samples/mount.c:113 libmount/samples/mount.c:158
#: misc-utils/findmnt.c:605 misc-utils/findmnt.c:671
msgid "failed to initialize libmount iterator"
msgstr ""

#: libmount/samples/mount.c:168
#, c-format
msgid "%-20s: ignored\n"
msgstr ""

#: libmount/samples/mount.c:169
#, fuzzy, c-format
msgid "%-20s: already mounted\n"
msgstr "%s 已经挂载.\t"

#: libmount/samples/mount.c:174
#, fuzzy, c-format
msgid "%-20s: failed: %s\n"
msgstr "%s 失败.\n"

#: libmount/samples/mount.c:178
#, fuzzy, c-format
msgid "%-20s: failed\n"
msgstr "%s 失败.\n"

#: libmount/samples/mount.c:194
#, c-format
msgid ""
"Usage:\n"
" %1$s [-lhV]\n"
" %1$s -a [options]\n"
" %1$s [options] <source> | <directory>\n"
" %1$s [options] <source> <directory>\n"
" %1$s <operation> <mountpoint> [<target>]\n"
msgstr ""

#: libmount/samples/mount.c:203
#, c-format
msgid ""
"\n"
"Options:\n"
" -a, --all               mount all filesystems mentioned in fstab\n"
" -c, --no-canonicalize   don't canonicalize paths\n"
" -f, --fake              dry run; skip the mount(2) syscall\n"
" -F, --fork              fork off for each device (use with -a)\n"
msgstr ""

#: libmount/samples/mount.c:209
#, c-format
msgid ""
" -h, --help              display this help text and exit\n"
" -i, --internal-only     don't call the mount.<type> helpers\n"
" -l, --show-labels       lists all mounts with LABELs\n"
" -n, --no-mtab           don't write to /etc/mtab\n"
msgstr ""

#: libmount/samples/mount.c:214
#, c-format
msgid ""
" -o, --options <list>    comma-separated list of mount options\n"
" -O, --test-opts <list>  limit the set of filesystems (use with -a)\n"
" -r, --read-only         mount the filesystem read-only (same as -o ro)\n"
" -t, --types <list>      limit the set of filesystem types\n"
msgstr ""

#: libmount/samples/mount.c:219
#, c-format
msgid ""
" -v, --verbose           say what is being done\n"
" -V, --version           display version information and exit\n"
" -w, --read-write        mount the filesystem read-write (default)\n"
msgstr ""

#: libmount/samples/mount.c:224
#, c-format
msgid ""
"\n"
"Source:\n"
" -L, --label <label>     synonym for LABEL=<label>\n"
" -U, --uuid <uuid>       synonym for UUID=<uuid>\n"
" LABEL=<label>           specifies device by filesystem label\n"
" UUID=<uuid>             specifies device by filesystem UUID\n"
msgstr ""

#: libmount/samples/mount.c:230
#, c-format
msgid ""
" <device>                specifies device by path\n"
" <directory>             mountpoint for bind mounts (see --bind/rbind)\n"
" <file>                  regular file for loopdev setup\n"
msgstr ""

#: libmount/samples/mount.c:235
#, c-format
msgid ""
"\n"
"Operations:\n"
" -B, --bind              mount a subtree somewhere else (same as -o bind)\n"
" -M, --move              move a subtree to some other place\n"
" -R, --rbind             mount a subtree and all submounts somewhere else\n"
msgstr ""

#: libmount/samples/mount.c:240
#, c-format
msgid ""
" --make-shared           mark a subtree as shared\n"
" --make-slave            mark a subtree as slave\n"
" --make-private          mark a subtree as private\n"
" --make-unbindable       mark a subtree as unbindable\n"
msgstr ""

#: libmount/samples/mount.c:245
#, c-format
msgid ""
" --make-rshared          recursively mark a whole subtree as shared\n"
" --make-rslave           recursively mark a whole subtree as slave\n"
" --make-rprivate         recursively mark a whole subtree as private\n"
" --make-runbindable      recursively mark a whole subtree as unbindable\n"
msgstr ""

#: libmount/samples/mount.c:250
#, c-format
msgid ""
"\n"
"For more information see mount(8).\n"
msgstr ""

#: libmount/samples/mount.c:304
msgid "libmount context allocation failed"
msgstr ""

#: libmount/samples/mount.c:339 libmount/samples/mount.c:349
#: libmount/samples/mount.c:353
#, fuzzy
msgid "failed to append options"
msgstr "不能读 inodes"

#: libmount/samples/mount.c:357
#, fuzzy
msgid "failed to set options pattern"
msgstr "不能读 inodes"

#: libmount/samples/mount.c:362
msgid "only one <source> may be specified"
msgstr ""

#: libmount/samples/mount.c:365
#, fuzzy
msgid "failed to allocate source buffer"
msgstr "不能为 inodes 分配缓冲区"

#: login-utils/checktty.c:94 login-utils/checktty.c:115
#, c-format
msgid "login: memory low, login may fail\n"
msgstr ""

#: login-utils/checktty.c:95
msgid "can't malloc for ttyclass"
msgstr ""

#: login-utils/checktty.c:116
msgid "can't malloc for grplist"
msgstr ""

#: login-utils/checktty.c:566
#, c-format
msgid "Login on %s from %s denied by default.\n"
msgstr ""

#: login-utils/checktty.c:577
#, c-format
msgid "Login on %s from %s denied.\n"
msgstr ""

#: login-utils/chfn.c:100
#, c-format
msgid "Usage: %s [ -f full-name ] [ -o office ] "
msgstr ""

#: login-utils/chfn.c:101
#, c-format
msgid ""
"[ -p office-phone ]\n"
"\t[ -h home-phone ] "
msgstr ""

#: login-utils/chfn.c:102
#, c-format
msgid "[ --help ] [ --version ]\n"
msgstr ""

#: login-utils/chfn.c:143 login-utils/chsh.c:123
#, c-format
msgid "%s: you (user %d) don't exist."
msgstr ""

#: login-utils/chfn.c:148 login-utils/chsh.c:128
#, c-format
msgid "%s: user \"%s\" does not exist."
msgstr ""

#: login-utils/chfn.c:153
msgid "can only change local entries"
msgstr ""

#: login-utils/chfn.c:163
#, c-format
msgid "%s: %s is not authorized to change the finger info of %s"
msgstr ""

#: login-utils/chfn.c:165 login-utils/chsh.c:144
msgid "Unknown user context"
msgstr ""

#: login-utils/chfn.c:170
msgid "can't set default context for /etc/passwd"
msgstr ""

#: login-utils/chfn.c:180
#, c-format
msgid "Changing finger information for %s.\n"
msgstr ""

#: login-utils/chfn.c:191 login-utils/chsh.c:183
#, c-format
msgid "%s: PAM failure, aborting: %s"
msgstr ""

#: login-utils/chfn.c:212 login-utils/chsh.c:204 login-utils/login.c:835
#: login-utils/newgrp.c:82 mount/lomount.c:863 mount/lomount.c:866
msgid "Password: "
msgstr ""

#: login-utils/chfn.c:215 login-utils/chsh.c:207
msgid "Incorrect password."
msgstr ""

#: login-utils/chfn.c:226
#, c-format
msgid "Finger information not changed.\n"
msgstr ""

#: login-utils/chfn.c:359
msgid "Office"
msgstr ""

#: login-utils/chfn.c:360
msgid "Office Phone"
msgstr ""

#: login-utils/chfn.c:361
msgid "Home Phone"
msgstr ""

#: login-utils/chfn.c:382 login-utils/chsh.c:300
#, c-format
msgid ""
"\n"
"Aborted.\n"
msgstr ""

#: login-utils/chfn.c:415
#, c-format
msgid "field is too long.\n"
msgstr ""

#: login-utils/chfn.c:423
#, c-format
msgid "'%c' is not allowed.\n"
msgstr ""

#: login-utils/chfn.c:428
#, c-format
msgid "Control characters are not allowed.\n"
msgstr ""

#: login-utils/chfn.c:493
#, c-format
msgid "Finger information *NOT* changed.  Try again later.\n"
msgstr ""

#: login-utils/chfn.c:496
#, c-format
msgid "Finger information changed.\n"
msgstr ""

#: login-utils/chsh.c:90
#, c-format
msgid ""
"Usage: %1$s [-s shell] [username]\n"
"   or: %1$s (--list-shells | --help | --version)\n"
msgstr ""

#: login-utils/chsh.c:133
#, c-format
msgid "%s: can only change local entries."
msgstr ""

#: login-utils/chsh.c:143
#, c-format
msgid "%s: %s is not authorized to change the shell of %s"
msgstr ""

#: login-utils/chsh.c:149
#, c-format
msgid "%s: can't set default context for /etc/passwd"
msgstr ""

#: login-utils/chsh.c:161
#, c-format
msgid ""
"%s: running UID doesn't match UID of user we're altering, shell change denied"
msgstr ""

#: login-utils/chsh.c:166
#, c-format
msgid "%s: your shell is not in /etc/shells, shell change denied"
msgstr ""

#: login-utils/chsh.c:172
#, c-format
msgid "Changing shell for %s.\n"
msgstr ""

#: login-utils/chsh.c:215
msgid "New shell"
msgstr ""

#: login-utils/chsh.c:224
#, c-format
msgid "Shell not changed.\n"
msgstr ""

#: login-utils/chsh.c:229
#, fuzzy
msgid "setpwnam failed"
msgstr "查找失败"

#: login-utils/chsh.c:230
#, c-format
msgid "Shell *NOT* changed.  Try again later.\n"
msgstr ""

#: login-utils/chsh.c:233
#, c-format
msgid "Shell changed.\n"
msgstr ""

#: login-utils/chsh.c:328
#, c-format
msgid "%s: shell must be a full path name.\n"
msgstr ""

#: login-utils/chsh.c:332
#, c-format
msgid "%s: \"%s\" does not exist.\n"
msgstr ""

#: login-utils/chsh.c:336
#, c-format
msgid "%s: \"%s\" is not executable.\n"
msgstr ""

#: login-utils/chsh.c:343
#, c-format
msgid "%s: '%c' is not allowed.\n"
msgstr ""

#: login-utils/chsh.c:347
#, c-format
msgid "%s: Control characters are not allowed.\n"
msgstr ""

#: login-utils/chsh.c:354 login-utils/chsh.c:364
#, c-format
msgid "Warning: \"%s\" is not listed in /etc/shells.\n"
msgstr ""

#: login-utils/chsh.c:356
#, c-format
msgid "%s: \"%s\" is not listed in /etc/shells.\n"
msgstr ""

#: login-utils/chsh.c:358
#, c-format
msgid "%s: Use -l option to see list.\n"
msgstr ""

#: login-utils/chsh.c:365
#, c-format
msgid "Use %s -l to see list.\n"
msgstr ""

#: login-utils/chsh.c:386
#, c-format
msgid "No known shells.\n"
msgstr ""

#: login-utils/islocal.c:87
#, c-format
msgid "Failed to open %s for reading, exiting."
msgstr ""

#: login-utils/last.c:150
msgid "usage: last [-#] [-f file] [-t tty] [-h hostname] [user ...]\n"
msgstr ""

#: login-utils/last.c:247
#, fuzzy, c-format
msgid "%s: mmap failed"
msgstr "%s 失败.\n"

#: login-utils/last.c:307
msgid "  still logged in"
msgstr ""

#: login-utils/last.c:329
#, c-format
msgid ""
"\n"
"wtmp begins %s"
msgstr ""

#: login-utils/last.c:424
#, fuzzy
msgid "gethostname failed"
msgstr "查找失败"

#: login-utils/last.c:470
#, c-format
msgid ""
"\n"
"interrupted %10.10s %5.5s \n"
msgstr ""

#: login-utils/login.c:201
#, c-format
msgid "FATAL: can't reopen tty: %s"
msgstr ""

#: login-utils/login.c:208
#, c-format
msgid "FATAL: %s is not a terminal"
msgstr ""

#: login-utils/login.c:241
msgid "FATAL: bad tty"
msgstr ""

#: login-utils/login.c:448
#, c-format
msgid "login: -h for super-user only.\n"
msgstr ""

#: login-utils/login.c:491
#, c-format
msgid "usage: login [-fp] [username]\n"
msgstr ""

#: login-utils/login.c:586
#, c-format
msgid "PAM failure, aborting: %s"
msgstr ""

#: login-utils/login.c:587
#, c-format
msgid "Couldn't initialize PAM: %s"
msgstr ""

#: login-utils/login.c:604
msgid "login: "
msgstr ""

#: login-utils/login.c:648
#, c-format
msgid "FAILED LOGIN %d FROM %s FOR %s, %s"
msgstr ""

#: login-utils/login.c:653
#, c-format
msgid ""
"Login incorrect\n"
"\n"
msgstr ""

#: login-utils/login.c:662
#, c-format
msgid "TOO MANY LOGIN TRIES (%d) FROM %s FOR %s, %s"
msgstr ""

#: login-utils/login.c:666
#, c-format
msgid "FAILED LOGIN SESSION FROM %s FOR %s, %s"
msgstr ""

#: login-utils/login.c:671
#, c-format
msgid ""
"\n"
"Login incorrect\n"
msgstr ""

#: login-utils/login.c:699 login-utils/login.c:706 login-utils/login.c:740
msgid ""
"\n"
"Session setup problem, abort."
msgstr ""

#: login-utils/login.c:700
#, c-format
msgid "NULL user name in %s:%d. Abort."
msgstr ""

#: login-utils/login.c:707
#, c-format
msgid "Invalid user name \"%s\" in %s:%d. Abort."
msgstr ""

#: login-utils/login.c:726
msgid "out of memory"
msgstr ""

#: login-utils/login.c:770
msgid "Illegal username"
msgstr ""

#: login-utils/login.c:812
#, c-format
msgid "%s login refused on this terminal."
msgstr ""

#: login-utils/login.c:817
#, c-format
msgid "LOGIN %s REFUSED FROM %s ON TTY %s"
msgstr ""

#: login-utils/login.c:821
#, c-format
msgid "LOGIN %s REFUSED ON TTY %s"
msgstr ""

#: login-utils/login.c:875
#, c-format
msgid "Login incorrect\n"
msgstr ""

#: login-utils/login.c:1026 login-utils/login.c:1036 login-utils/login.c:1038
msgid "change terminal owner failed"
msgstr ""

#: login-utils/login.c:1046
#, fuzzy
msgid "setgid() failed"
msgstr "查找失败"

#: login-utils/login.c:1110
#, c-format
msgid "DIALUP AT %s BY %s"
msgstr ""

#: login-utils/login.c:1117
#, c-format
msgid "ROOT LOGIN ON %s FROM %s"
msgstr ""

#: login-utils/login.c:1120
#, c-format
msgid "ROOT LOGIN ON %s"
msgstr ""

#: login-utils/login.c:1123
#, c-format
msgid "LOGIN ON %s BY %s FROM %s"
msgstr ""

#: login-utils/login.c:1126
#, c-format
msgid "LOGIN ON %s BY %s"
msgstr ""

#: login-utils/login.c:1147
#, c-format
msgid "You have new mail.\n"
msgstr ""

#: login-utils/login.c:1149
#, c-format
msgid "You have mail.\n"
msgstr ""

#: login-utils/login.c:1192
msgid "failure forking"
msgstr ""

#: login-utils/login.c:1239
#, c-format
msgid "TIOCSCTTY failed: %m"
msgstr ""

#: login-utils/login.c:1245
msgid "setuid() failed"
msgstr ""

#: login-utils/login.c:1251
#, fuzzy, c-format
msgid "%s: change directory failed"
msgstr "查找失败"

#: login-utils/login.c:1255
#, c-format
msgid "Logging in with home = \"/\".\n"
msgstr ""

#: login-utils/login.c:1283
msgid "couldn't exec shell script"
msgstr ""

#: login-utils/login.c:1285
msgid "no shell"
msgstr ""

#: login-utils/login.c:1300
#, c-format
msgid ""
"\n"
"%s login: "
msgstr ""

#: login-utils/login.c:1311
msgid "NAME too long"
msgstr ""

#: login-utils/login.c:1312
msgid "login name much too long."
msgstr ""

#: login-utils/login.c:1317
msgid "login names may not start with '-'."
msgstr ""

#: login-utils/login.c:1327
msgid "EXCESSIVE linefeeds"
msgstr ""

#: login-utils/login.c:1328
msgid "too many bare linefeeds."
msgstr ""

#. TRANSLATORS: The standard value for %d is 60.
#: login-utils/login.c:1360
#, c-format
msgid "timed out after %d seconds"
msgstr ""

#: login-utils/login.c:1454
#, c-format
msgid "Last login: %.*s "
msgstr ""

#: login-utils/login.c:1458
#, c-format
msgid "from %.*s\n"
msgstr ""

#: login-utils/login.c:1461
#, c-format
msgid "on %.*s\n"
msgstr ""

#: login-utils/login.c:1479
#, fuzzy
msgid "write lastlog failed"
msgstr "查找失败"

#: login-utils/login.c:1488
#, c-format
msgid "LOGIN FAILURE FROM %s, %s"
msgstr ""

#: login-utils/login.c:1491
#, c-format
msgid "LOGIN FAILURE ON %s, %s"
msgstr ""

#: login-utils/login.c:1495
#, c-format
msgid "%d LOGIN FAILURES FROM %s, %s"
msgstr ""

#: login-utils/login.c:1498
#, c-format
msgid "%d LOGIN FAILURES ON %s, %s"
msgstr ""

#: login-utils/newgrp.c:102
msgid "who are you?"
msgstr ""

#: login-utils/newgrp.c:108 login-utils/newgrp.c:119
#, fuzzy
msgid "setgid failed"
msgstr "查找失败"

#: login-utils/newgrp.c:113 login-utils/newgrp.c:115
msgid "no such group"
msgstr ""

#: login-utils/newgrp.c:121
msgid "permission denied"
msgstr ""

#: login-utils/newgrp.c:126
#, fuzzy
msgid "setuid failed"
msgstr "查找失败"

#: login-utils/newgrp.c:130 sys-utils/unshare.c:127
#, fuzzy, c-format
msgid "exec %s failed"
msgstr "%s 失败.\n"

#: login-utils/vipw.c:144
#, c-format
msgid "%s: the password file is busy.\n"
msgstr ""

#: login-utils/vipw.c:147
#, c-format
msgid "%s: the group file is busy.\n"
msgstr ""

#: login-utils/vipw.c:161
#, c-format
msgid "%s: the %s file is busy (%s present)\n"
msgstr ""

#: login-utils/vipw.c:167
#, c-format
msgid "%s: can't link %s: %s\n"
msgstr ""

#: login-utils/vipw.c:196
#, fuzzy, c-format
msgid "%s: create a link to %s failed"
msgstr "%s 失败.\n"

#: login-utils/vipw.c:203
#, c-format
msgid "%s: Can't get context for %s"
msgstr ""

#: login-utils/vipw.c:209
#, c-format
msgid "%s: Can't set context for %s"
msgstr ""

#: login-utils/vipw.c:218
#, c-format
msgid "%s: can't unlock %s: %s (your changes are still in %s)\n"
msgstr ""

#: login-utils/vipw.c:241 mount/swapon.c:263 term-utils/script.c:264
#: term-utils/script.c:274
#, fuzzy
msgid "fork failed"
msgstr "查找失败"

#: login-utils/vipw.c:278
#, c-format
msgid "%s: %s unchanged\n"
msgstr ""

#: login-utils/vipw.c:299
#, c-format
msgid "%s: no changes made\n"
msgstr ""

#: login-utils/vipw.c:352
#, c-format
msgid "You are using shadow groups on this system.\n"
msgstr ""

#: login-utils/vipw.c:353
#, c-format
msgid "You are using shadow passwords on this system.\n"
msgstr ""

#: login-utils/vipw.c:354
#, c-format
msgid "Would you like to edit %s now [y/n]? "
msgstr ""

#: misc-utils/cal.c:369
msgid "illegal day value"
msgstr ""

#: misc-utils/cal.c:371 misc-utils/cal.c:385
#, c-format
msgid "illegal day value: use 1-%d"
msgstr ""

#: misc-utils/cal.c:374 misc-utils/cal.c:376
msgid "illegal month value: use 1-12"
msgstr ""

#: misc-utils/cal.c:379 misc-utils/cal.c:381
msgid "illegal year value: use 1-9999"
msgstr ""

#: misc-utils/cal.c:469
#, c-format
msgid "%s %d"
msgstr ""

#: misc-utils/cal.c:788
#, fuzzy, c-format
msgid " %s [options] [[[day] month] year]\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/cal.c:792
msgid ""
" -1, --one        show only current month (default)\n"
" -3, --three      show previous, current and next month\n"
" -s, --sunday     Sunday as first day of week\n"
" -m, --monday     Monday as first day of week\n"
" -j, --julian     output Julian dates\n"
" -y, --year       show whole current year\n"
" -V, --version    display version information and exit\n"
" -h, --help       display this help text and exit\n"
"\n"
msgstr ""

#: misc-utils/ddate.c:205
#, c-format
msgid "usage: %s [+format] [day month year]\n"
msgstr ""

#: misc-utils/ddate.c:252
msgid "St. Tib's Day"
msgstr ""

#: misc-utils/findfs.c:24
#, c-format
msgid "Usage: %s LABEL=<label>|UUID=<uuid>\n"
msgstr ""

#: misc-utils/findfs.c:55 misc-utils/logger.c:94
#, fuzzy, c-format
msgid "unable to resolve '%s'"
msgstr "不能读 inodes"

#: misc-utils/findmnt.c:83
#, fuzzy
msgid "source device"
msgstr "设置只读"

#: misc-utils/findmnt.c:84
msgid "mountpoint"
msgstr ""

#: misc-utils/findmnt.c:85 misc-utils/lsblk.c:104
#, fuzzy
msgid "filesystem type"
msgstr "Filesystem state=%d\n"

#: misc-utils/findmnt.c:86
#, fuzzy
msgid "all mount options"
msgstr "不能读 inodes"

#: misc-utils/findmnt.c:87
msgid "VFS specific mount options"
msgstr ""

#: misc-utils/findmnt.c:88
msgid "FS specific mount options"
msgstr ""

#: misc-utils/findmnt.c:89
#, fuzzy
msgid "filesystem label"
msgstr "Filesystem state=%d\n"

#: misc-utils/findmnt.c:90 misc-utils/lsblk.c:107
msgid "filesystem UUID"
msgstr ""

#: misc-utils/findmnt.c:91 misc-utils/lsblk.c:103
msgid "major:minor device number"
msgstr ""

#: misc-utils/findmnt.c:92
msgid "action detected by --poll"
msgstr ""

#: misc-utils/findmnt.c:93
msgid "old mount options saved by --poll"
msgstr ""

#: misc-utils/findmnt.c:94
msgid "old mountpoint saved by --poll"
msgstr ""

#: misc-utils/findmnt.c:212
#, fuzzy, c-format
msgid "unknown action: %s"
msgstr "%s: 未知命令: %s\n"

#: misc-utils/findmnt.c:255 misc-utils/lsblk.c:210 partx/partx.c:118
#: sys-utils/lscpu.c:191
#, fuzzy, c-format
msgid "unknown column: %s"
msgstr "%s: 未知命令: %s\n"

#: misc-utils/findmnt.c:361
msgid "mount"
msgstr ""

#: misc-utils/findmnt.c:364
msgid "umount"
msgstr ""

#: misc-utils/findmnt.c:367
msgid "remount"
msgstr ""

#: misc-utils/findmnt.c:370
#, fuzzy
msgid "move"
msgstr " 删除"

#: misc-utils/findmnt.c:405 misc-utils/findmnt.c:422 partx/partx.c:382
#, fuzzy
msgid "failed to add line to output"
msgstr "不能为 inodes 分配缓冲区"

#: misc-utils/findmnt.c:487
#, fuzzy, c-format
msgid "%s: parse error at line %d"
msgstr "%s: %s ioctl 错误\n"

#: misc-utils/findmnt.c:498 misc-utils/findmnt.c:665
#, fuzzy
msgid "failed to initialize libmount table"
msgstr "不能为 inodes 分配缓冲区"

#: misc-utils/findmnt.c:513 text-utils/parse.c:64
#, fuzzy, c-format
msgid "can't read %s"
msgstr "%s 失败.\n"

#: misc-utils/findmnt.c:677
#, fuzzy
msgid "failed to initialize libmount tabdiff"
msgstr "不能为 inodes 分配缓冲区"

#: misc-utils/findmnt.c:705
#, fuzzy
msgid "poll() failed"
msgstr "查找失败"

#: misc-utils/findmnt.c:764
#, c-format
msgid ""
"\n"
"Usage:\n"
" %1$s [options]\n"
" %1$s [options] <device> | <mountpoint>\n"
" %1$s [options] <device> <mountpoint>\n"
" %1$s [options] [--source <device>] [--target <mountpoint>]\n"
msgstr ""

#: misc-utils/findmnt.c:772
#, c-format
msgid ""
"\n"
"Options:\n"
" -s, --fstab            search in static table of filesystems\n"
" -m, --mtab             search in table of mounted filesystems\n"
" -k, --kernel           search in kernel table of mounted\n"
"                          filesystems (default)\n"
"\n"
msgstr ""

#: misc-utils/findmnt.c:779
#, c-format
msgid ""
" -p, --poll[=<list>]    monitor changes in table of mounted filesystems\n"
" -w, --timeout <num>    upper limit in milliseconds that --poll will block\n"
"\n"
msgstr ""

#: misc-utils/findmnt.c:783
#, c-format
msgid ""
" -a, --ascii            use ASCII chars for tree formatting\n"
" -c, --canonicalize     canonicalize printed paths\n"
" -d, --direction <word> direction of search, 'forward' or 'backward'\n"
" -e, --evaluate         convert tags (LABEL/UUID) to device names\n"
" -f, --first-only       print the first found filesystem only\n"
msgstr ""

#: misc-utils/findmnt.c:790
#, c-format
msgid ""
" -h, --help             display this help text and exit\n"
" -i, --invert           invert the sense of matching\n"
" -l, --list             use list format output\n"
" -n, --noheadings       don't print column headings\n"
" -u, --notruncate       don't truncate text in columns\n"
msgstr ""

#: misc-utils/findmnt.c:796
#, c-format
msgid ""
" -O, --options <list>   limit the set of filesystems by mount options\n"
" -o, --output <list>    the output columns to be shown\n"
" -P, --pairs            use key=\"value\" output format\n"
" -r, --raw              use raw output format\n"
" -t, --types <list>     limit the set of filesystems by FS types\n"
msgstr ""

#: misc-utils/findmnt.c:802
#, c-format
msgid ""
" -v, --nofsroot         don't print [/dir] for bind or btrfs mounts\n"
" -R, --submounts        print all submounts for the matching filesystems\n"
" -S, --source <string>  the device to mount (by name, LABEL= or UUID=)\n"
" -T, --target <string>  the mountpoint to use\n"
"\n"
msgstr ""

#: misc-utils/findmnt.c:808 misc-utils/lsblk.c:893
#, fuzzy, c-format
msgid ""
"\n"
"Available columns:\n"
msgstr "可用的命令:\n"

#: misc-utils/findmnt.c:814
#, c-format
msgid ""
"\n"
"For more information see findmnt(1).\n"
msgstr ""

#: misc-utils/findmnt.c:822 misc-utils/lsblk.c:906
msgid "options are mutually exclusive"
msgstr ""

#: misc-utils/findmnt.c:890
#, fuzzy, c-format
msgid "unknown direction '%s'"
msgstr "%s: 未知命令: %s\n"

#: misc-utils/findmnt.c:981
#, fuzzy
msgid "failed to parse timeout"
msgstr "不能读 inodes"

#: misc-utils/findmnt.c:1011
msgid ""
"options --target and --source can't be used together with command line "
"element that is not an option"
msgstr ""

#: misc-utils/findmnt.c:1050
msgid "failed to initialize libmount cache"
msgstr ""

#: misc-utils/findmnt.c:1060 misc-utils/lsblk.c:1039 partx/partx.c:470
#, fuzzy
msgid "failed to initialize output table"
msgstr "不能为 inodes 分配缓冲区"

#: misc-utils/findmnt.c:1072
#, c-format
msgid "%s column is requested, but --poll is not enabled"
msgstr ""

#: misc-utils/findmnt.c:1078 misc-utils/lsblk.c:1049 partx/partx.c:478
msgid "failed to initialize output column"
msgstr ""

#: misc-utils/kill.c:213
#, c-format
msgid "%s: unknown signal %s\n"
msgstr ""

#: misc-utils/kill.c:246
#, fuzzy
msgid "failed to parse sigval"
msgstr "不能读 inodes"

#: misc-utils/kill.c:287
#, c-format
msgid "%s: can't find process \"%s\"\n"
msgstr ""

#: misc-utils/kill.c:367
#, c-format
msgid "%s: unknown signal %s; valid signals:\n"
msgstr ""

#: misc-utils/kill.c:415
#, c-format
msgid "usage: %s [ -s signal | -p ] [ -a ] pid ...\n"
msgstr ""

#: misc-utils/kill.c:416
#, c-format
msgid "       %s -l [ signal ]\n"
msgstr ""

#: misc-utils/logger.c:73
#, c-format
msgid "openlog %s: pathname too long"
msgstr ""

#: misc-utils/logger.c:79
#, c-format
msgid "socket %s"
msgstr ""

#: misc-utils/logger.c:82
#, c-format
msgid "connect %s"
msgstr ""

#: misc-utils/logger.c:97 misc-utils/uuidd.c:140
msgid "socket"
msgstr ""

#: misc-utils/logger.c:104 misc-utils/uuidd.c:151
msgid "connect"
msgstr ""

#: misc-utils/logger.c:140
#, fuzzy, c-format
msgid " %s [options] [message]\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/logger.c:143
msgid ""
" -d, --udp             use UDP (TCP is default)\n"
" -i, --id              log the process ID too\n"
" -f, --file <file>     log the contents of this file\n"
" -h, --help            display this help text and exit\n"
msgstr ""

#: misc-utils/logger.c:147
msgid ""
" -n, --server <name>   write to this remote syslog server\n"
" -P, --port <number>   use this UDP port\n"
" -p, --priority <prio> mark given message with this priority\n"
" -s, --stderr          output message to standard error as well\n"
msgstr ""

#: misc-utils/logger.c:151
msgid ""
" -t, --tag <tag>       mark every line with this tag\n"
" -u, --socket <socket> write to this Unix socket\n"
" -V, --version         output version information and exit\n"
"\n"
msgstr ""

#: misc-utils/logger.c:200
#, c-format
msgid "file %s"
msgstr ""

#: misc-utils/logger.c:227
#, fuzzy
msgid "failed to parse port number"
msgstr "不能读 inodes"

#: misc-utils/logger.c:229
#, c-format
msgid "port `%ld' out of range"
msgstr ""

#: misc-utils/logger.c:328
#, fuzzy, c-format
msgid "unknown facility name: %s."
msgstr "%s: 未知命令: %s\n"

#: misc-utils/logger.c:338
#, fuzzy, c-format
msgid "unknown priority name: %s."
msgstr "%s: 未知命令: %s\n"

#: misc-utils/look.c:368
#, fuzzy, c-format
msgid " %s [options] string [file]\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/look.c:371
msgid ""
" -a, --alternative      use alternate dictionary\n"
" -d, --alphanum         compare only alpha numeric characters\n"
" -f, --ignore-case      ignore when comparing\n"
" -t, --terminate <char> define string termination character\n"
" -V, --version          output version information and exit\n"
" -h, --help             display this help and exit\n"
"\n"
msgstr ""

#: misc-utils/lsblk.c:101
msgid "device name"
msgstr ""

#: misc-utils/lsblk.c:102
msgid "internal kernel device name"
msgstr ""

#: misc-utils/lsblk.c:105
msgid "where the device is mounted"
msgstr ""

#: misc-utils/lsblk.c:106
msgid "filesystem LABEL"
msgstr ""

#: misc-utils/lsblk.c:108
#, fuzzy
msgid "read-only device"
msgstr "设置只读"

#: misc-utils/lsblk.c:109
msgid "removable device"
msgstr ""

#: misc-utils/lsblk.c:110
msgid "rotational device"
msgstr ""

#: misc-utils/lsblk.c:111
msgid "device identifier"
msgstr ""

#: misc-utils/lsblk.c:112
msgid "size of the device"
msgstr ""

#: misc-utils/lsblk.c:113
#, fuzzy
msgid "state of the device"
msgstr "%s:不是一个块设备\n"

#: misc-utils/lsblk.c:114
msgid "user name"
msgstr ""

#: misc-utils/lsblk.c:115
msgid "group name"
msgstr ""

#: misc-utils/lsblk.c:116
msgid "device node permissions"
msgstr ""

#: misc-utils/lsblk.c:117
msgid "alignment offset"
msgstr ""

#: misc-utils/lsblk.c:118
msgid "minimum I/O size"
msgstr ""

#: misc-utils/lsblk.c:119
msgid "optimal I/O size"
msgstr ""

#: misc-utils/lsblk.c:120
#, fuzzy
msgid "physical sector size"
msgstr "获得段大小"

#: misc-utils/lsblk.c:121
#, fuzzy
msgid "logical sector size"
msgstr "获得段大小"

#: misc-utils/lsblk.c:122
msgid "I/O scheduler name"
msgstr ""

#: misc-utils/lsblk.c:123
msgid "request queue size"
msgstr ""

#: misc-utils/lsblk.c:124
msgid "device type"
msgstr ""

#: misc-utils/lsblk.c:125
#, fuzzy
msgid "discard alignment offset"
msgstr "获得字节大小"

#: misc-utils/lsblk.c:126
msgid "discard granularity"
msgstr ""

#: misc-utils/lsblk.c:127
msgid "discard max bytes"
msgstr ""

#: misc-utils/lsblk.c:128
msgid "discard zeroes data"
msgstr ""

#: misc-utils/lsblk.c:649
#, fuzzy, c-format
msgid "%s: failed to get device path"
msgstr "%s:不是一个块设备\n"

#: misc-utils/lsblk.c:656
#, c-format
msgid "%s: unknown device name"
msgstr ""

#: misc-utils/lsblk.c:661
#, fuzzy, c-format
msgid "%s: failed to initialize sysfs handler"
msgstr "不能为 inodes 分配缓冲区"

#: misc-utils/lsblk.c:680
#, fuzzy, c-format
msgid "%s: failed to get dm name"
msgstr "不能读 inodes"

#: misc-utils/lsblk.c:712
msgid "failed to open device directory in sysfs"
msgstr ""

#: misc-utils/lsblk.c:792
#, fuzzy, c-format
msgid "%s: failed to get whole-disk device number"
msgstr "不能读 inodes"

#: misc-utils/lsblk.c:809
#, fuzzy, c-format
msgid "failed to compose sysfs path for %s"
msgstr "不能读 inodes"

#: misc-utils/lsblk.c:816
#, fuzzy, c-format
msgid "%s: failed to read link"
msgstr "不能读 inodes"

#: misc-utils/lsblk.c:855
#, fuzzy, c-format
msgid "failed to parse list '%s'"
msgstr "不能读 inodes"

#. TRANSLATORS: The standard value for %d is 256.
#: misc-utils/lsblk.c:860
#, c-format
msgid "the list of excluded devices is too large (limit is %d devices)"
msgstr ""

#: misc-utils/lsblk.c:872
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options] [<device> ...]\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/lsblk.c:876
#, c-format
msgid ""
"\n"
"Options:\n"
" -a, --all            print all devices\n"
" -b, --bytes          print SIZE in bytes rather than in human readable "
"format\n"
" -d, --nodeps         don't print slaves or holders\n"
" -D, --discard        print discard capabilities\n"
" -e, --exclude <list> exclude devices by major number (default: RAM disks)\n"
" -f, --fs             output info about filesystems\n"
" -h, --help           usage information (this)\n"
" -i, --ascii          use ascii characters only\n"
" -m, --perms          output info about permissions\n"
" -l, --list           use list format ouput\n"
" -n, --noheadings     don't print headings\n"
" -o, --output <list>  output columns\n"
" -P, --pairs          use key=\"value\" output format\n"
" -r, --raw            use raw output format\n"
" -t, --topology       output info about topology\n"
msgstr ""

#: misc-utils/lsblk.c:898
#, c-format
msgid ""
"\n"
"For more information see lsblk(8).\n"
msgstr ""

#: misc-utils/mcookie.c:68 misc-utils/uuidd.c:56 misc-utils/uuidgen.c:35
#: sys-utils/dmesg.c:134 sys-utils/ipcmk.c:88 sys-utils/lscpu.c:1038
#: sys-utils/rtcwake.c:88 term-utils/setterm.c:677
#, fuzzy, c-format
msgid " %s [options]\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/mcookie.c:71
msgid ""
" -f, --file <file> use file as a cookie seed\n"
" -v, --verbose     explain what is being done\n"
" -V, --version     output version information and exit\n"
" -h, --help        display this help and exit\n"
"\n"
msgstr ""

#: misc-utils/mcookie.c:144 misc-utils/mcookie.c:178
#, fuzzy, c-format
msgid "Could not open %s"
msgstr "%s: 不能打开 %s\n"

#: misc-utils/mcookie.c:149 misc-utils/mcookie.c:173
#, c-format
msgid "Got %d bytes from %s\n"
msgstr ""

#: misc-utils/mcookie.c:155
#, fuzzy, c-format
msgid "closing %s failed"
msgstr "%s 失败.\n"

#: misc-utils/namei.c:185
#, fuzzy, c-format
msgid "failed to read symlink: %s"
msgstr "不能读 inodes"

#: misc-utils/namei.c:224
#, c-format
msgid "could not stat '%s'"
msgstr ""

#: misc-utils/namei.c:363
#, fuzzy, c-format
msgid "%s - No such file or directory\n"
msgstr "根 inode 不是一个目录"

#: misc-utils/namei.c:413
#, fuzzy, c-format
msgid " %s [options] pathname [pathname ...]\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/namei.c:416
msgid ""
" -h, --help          displays this help text\n"
" -V, --version       output version information and exit\n"
" -x, --mountpoints   show mount point directories with a 'D'\n"
" -m, --modes         show the mode bits of each file\n"
" -o, --owners        show owner and group name of each file\n"
" -l, --long          use a long listing format (-m -o -v) \n"
" -n, --nosymlinks    don't follow symlinks\n"
" -v, --vertical      vertical align of modes and owners\n"
msgstr ""

#: misc-utils/namei.c:425
msgid ""
"\n"
"For more information see namei(1).\n"
msgstr ""

#: misc-utils/namei.c:485
msgid "pathname argument is missing"
msgstr ""

#: misc-utils/namei.c:509
#, c-format
msgid "%s: exceeded limit of symlinks"
msgstr ""

#: misc-utils/rename.c:53
#, fuzzy, c-format
msgid "renaming %s to %s failed"
msgstr "%s 失败.\n"

#: misc-utils/rename.c:66
#, fuzzy, c-format
msgid " %s [options] expression replacement file...\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/rename.c:70
msgid ""
" -v, --verbose    explain what is being done\n"
" -V, --version    output version information and exit\n"
" -h, --help       display this help and exit\n"
"\n"
msgstr ""

#: misc-utils/uuidd.c:59
msgid ""
" -p, --pid <path>    path to pid file\n"
" -s, --socket <path> path to socket\n"
" -T, --timeout <sec> specify inactivity timeout\n"
" -k, --kill          kill running daemon\n"
" -r, --random        test random-based generation\n"
" -t, --time          test time-based generation\n"
" -n, --uuids <num>   request number of uuids\n"
" -d, --debug         run in debugging mode\n"
" -q, --quiet         turn on quiet mode\n"
" -V, --version       output version information and exit\n"
" -h, --help          display this help and exit\n"
"\n"
msgstr ""

#: misc-utils/uuidd.c:133
msgid "bad arguments"
msgstr ""

#: misc-utils/uuidd.c:171
msgid "write"
msgstr ""

#: misc-utils/uuidd.c:179
msgid "read count"
msgstr ""

#: misc-utils/uuidd.c:185
msgid "bad response length"
msgstr ""

#: misc-utils/uuidd.c:226
#, fuzzy, c-format
msgid "Failed to open/create %s: %s\n"
msgstr "不能读 inodes"

#: misc-utils/uuidd.c:243
#, fuzzy, c-format
msgid "Failed to lock %s: %s\n"
msgstr "不能读 inodes"

#: misc-utils/uuidd.c:250
#, c-format
msgid "uuidd daemon already running at pid %s\n"
msgstr ""

#: misc-utils/uuidd.c:258
#, c-format
msgid "Couldn't create unix stream socket: %s"
msgstr ""

#: misc-utils/uuidd.c:285
#, c-format
msgid "Couldn't bind unix socket %s: %s\n"
msgstr ""

#: misc-utils/uuidd.c:293
#, c-format
msgid "Couldn't listen on unix socket %s: %s\n"
msgstr ""

#: misc-utils/uuidd.c:333
#, c-format
msgid "Error reading from client, len = %d\n"
msgstr ""

#: misc-utils/uuidd.c:342
#, c-format
msgid "operation %d, incoming num = %d\n"
msgstr ""

#: misc-utils/uuidd.c:345
#, c-format
msgid "operation %d\n"
msgstr ""

#: misc-utils/uuidd.c:361
#, c-format
msgid "Generated time UUID: %s\n"
msgstr ""

#: misc-utils/uuidd.c:371
#, c-format
msgid "Generated random UUID: %s\n"
msgstr ""

#: misc-utils/uuidd.c:380
#, c-format
msgid "Generated time UUID %s and %d following\n"
msgid_plural "Generated time UUID %s and %d following\n"
msgstr[0] ""
msgstr[1] ""

#: misc-utils/uuidd.c:401
#, c-format
msgid "Generated %d UUID:\n"
msgid_plural "Generated %d UUIDs:\n"
msgstr[0] ""
msgstr[1] ""

#: misc-utils/uuidd.c:415
#, c-format
msgid "Invalid operation %d\n"
msgstr ""

#: misc-utils/uuidd.c:427
#, c-format
msgid "Unexpected reply length from server %d"
msgstr ""

#: misc-utils/uuidd.c:478 misc-utils/uuidd.c:503
#, c-format
msgid "Bad number: %s\n"
msgstr ""

#: misc-utils/uuidd.c:541 misc-utils/uuidd.c:570
#, c-format
msgid "Error calling uuidd daemon (%s): %s\n"
msgstr ""

#: misc-utils/uuidd.c:551
#, c-format
msgid "%s and %d subsequent UUID\n"
msgid_plural "%s and %d subsequent UUIDs\n"
msgstr[0] ""
msgstr[1] ""

#: misc-utils/uuidd.c:555
#, c-format
msgid "List of UUIDs:\n"
msgstr ""

#: misc-utils/uuidd.c:590
#, c-format
msgid "Couldn't kill uuidd running at pid %d: %s\n"
msgstr ""

#: misc-utils/uuidd.c:596
#, c-format
msgid "Killed uuidd running at pid %d\n"
msgstr ""

#: misc-utils/uuidgen.c:38
msgid ""
" -r, --random     generate random-based uuid\n"
" -t, --time       generate time-based uuid\n"
" -V, --version    output version information and exit\n"
" -h, --help       display this help and exit\n"
"\n"
msgstr ""

#: misc-utils/whereis.c:134
#, fuzzy, c-format
msgid " %s [options] file\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/whereis.c:137
msgid ""
" -f <file>  define search scope\n"
" -b         search only binaries\n"
" -B <dirs>  define binaries lookup path\n"
" -m         search only manual paths\n"
" -M <dirs>  define man lookup path\n"
" -s         search only sources path\n"
" -S <dirs>  define sources lookup path\n"
" -u         search from unusual enties\n"
" -V         output version information and exit\n"
" -h         display this help and exit\n"
"\n"
msgstr ""

#: misc-utils/whereis.c:148
msgid "See how to use file and dirs arguments from whereis(1) manual.\n"
msgstr ""

#: misc-utils/wipefs.c:132
msgid "calloc failed"
msgstr ""

#: misc-utils/wipefs.c:186
#, c-format
msgid "error: %s: probing initialization failed"
msgstr ""

#: misc-utils/wipefs.c:197
#, c-format
msgid "WARNING: %s: appears to contain '%s' partition table"
msgstr ""

#: misc-utils/wipefs.c:224
#, c-format
msgid "no magic string found at offset 0x%jx -- ignored"
msgstr ""

#: misc-utils/wipefs.c:231
#, c-format
msgid "%s: failed to seek to offset 0x%jx"
msgstr ""

#: misc-utils/wipefs.c:238
#, fuzzy, c-format
msgid "%s: write failed"
msgstr "%s 失败.\n"

#: misc-utils/wipefs.c:240
#, c-format
msgid ""
"%zd bytes were erased at offset 0x%jx (%s)\n"
"they were: "
msgstr ""

#: misc-utils/wipefs.c:295
#, c-format
msgid "invalid offset value '%s' specified"
msgstr ""

#: misc-utils/wipefs.c:305
#, fuzzy, c-format
msgid " %s [options] <device>\n"
msgstr "用法: %s [ -n ] device\n"

#: misc-utils/wipefs.c:308
msgid ""
" -a, --all           wipe all magic strings (BE CAREFUL!)\n"
" -h, --help          show this help text\n"
" -n, --no-act        do everything except the actual write() call\n"
" -o, --offset <num>  offset to erase, in bytes\n"
" -p, --parsable      print out in parsable instead of printable format\n"
" -V, --version       output version information and exit\n"
msgstr ""

#: misc-utils/wipefs.c:315
#, c-format
msgid ""
"\n"
"For more information see wipefs(8).\n"
msgstr ""

#: misc-utils/wipefs.c:371
msgid "--offset and --all are mutually exclusive"
msgstr ""

#: misc-utils/wipefs.c:378
msgid "only one device as argument is currently supported."
msgstr ""

#: mount/fstab.c:144
#, c-format
msgid "warning: error reading %s: %s"
msgstr ""

#: mount/fstab.c:189
#, fuzzy
msgid "warning: failed to read mtab"
msgstr "不能读 inodes"

#: mount/fstab.c:217 mount/fstab.c:243
#, c-format
msgid "warning: can't open %s: %s"
msgstr ""

#: mount/fstab.c:222
#, c-format
msgid "mount: could not open %s - using %s instead\n"
msgstr ""

#: mount/fstab.c:674
#, c-format
msgid "can't create lock file %s: %s (use -n flag to override)"
msgstr ""

#: mount/fstab.c:700
#, c-format
msgid "can't link lock file %s: %s (use -n flag to override)"
msgstr ""

#: mount/fstab.c:716
#, c-format
msgid "can't open lock file %s: %s (use -n flag to override)"
msgstr ""

#: mount/fstab.c:731
#, c-format
msgid "Can't lock lock file %s: %s\n"
msgstr ""

#: mount/fstab.c:745
#, c-format
msgid "can't lock lock file %s: %s"
msgstr ""

#: mount/fstab.c:747
msgid "timed out"
msgstr ""

#: mount/fstab.c:754
#, c-format
msgid ""
"Cannot create link %s\n"
"Perhaps there is a stale lock file?\n"
msgstr ""

#: mount/fstab.c:896 mount/fstab.c:953
#, c-format
msgid "cannot open %s (%s) - mtab not updated"
msgstr ""

#: mount/fstab.c:961
#, c-format
msgid "error writing %s: %s"
msgstr ""

#: mount/fstab.c:976
#, fuzzy, c-format
msgid "%s: cannot fflush changes: %s"
msgstr "%s: 不能打开 %s\n"

#: mount/fstab.c:993
#, c-format
msgid "error changing mode of %s: %s\n"
msgstr ""

#: mount/fstab.c:1006
#, c-format
msgid "error changing owner of %s: %s\n"
msgstr ""

#: mount/fstab.c:1017
#, c-format
msgid "can't rename %s to %s: %s\n"
msgstr ""

#: mount/lomount.c:430 mount/lomount.c:568 mount/lomount.c:600
#: mount/lomount.c:663 mount/lomount.c:708
#, c-format
msgid "%s: /dev directory does not exist."
msgstr ""

#: mount/lomount.c:469
#, c-format
msgid "loop: can't set capacity on device %s: %s\n"
msgstr ""

#: mount/lomount.c:506
#, c-format
msgid ", offset %<PRIu64>"
msgstr ""

#: mount/lomount.c:509
#, c-format
msgid ", sizelimit %<PRIu64>"
msgstr ""

#: mount/lomount.c:517
#, c-format
msgid ", encryption %s (type %<PRIu32>)"
msgstr ""

#: mount/lomount.c:530
#, c-format
msgid ", offset %d"
msgstr ""

#: mount/lomount.c:533
#, c-format
msgid ", encryption type %d\n"
msgstr ""

#: mount/lomount.c:541
#, c-format
msgid "loop: can't get info on device %s: %s\n"
msgstr ""

#: mount/lomount.c:552
#, c-format
msgid "loop: can't open device %s: %s\n"
msgstr ""

#: mount/lomount.c:579 mount/lomount.c:721
#, c-format
msgid "%s: no permission to look at /dev/loop%s<N>"
msgstr ""

#: mount/lomount.c:724
#, c-format
msgid "%s: could not find any free loop device"
msgstr ""

#: mount/lomount.c:727
#, c-format
msgid ""
"%s: Could not find any loop device. Maybe this kernel does not know\n"
"       about the loop device? (If so, recompile or `modprobe loop'.)"
msgstr ""

#: mount/lomount.c:757
msgid "Out of memory while reading passphrase"
msgstr ""

#: mount/lomount.c:800
#, c-format
msgid "warning: %s is already associated with %s\n"
msgstr ""

#: mount/lomount.c:816
#, c-format
msgid "warning: %s: is write-protected, using read-only.\n"
msgstr ""

#: mount/lomount.c:852
#, c-format
msgid "Couldn't lock into memory, exiting.\n"
msgstr ""

#: mount/lomount.c:879
#, c-format
msgid "ioctl LOOP_SET_FD failed: %s\n"
msgstr ""

#: mount/lomount.c:936
#, c-format
msgid "set_loop(%s,%s,%llu,%llu): success\n"
msgstr ""

#: mount/lomount.c:957
#, c-format
msgid "del_loop(%s): success\n"
msgstr ""

#: mount/lomount.c:961
#, c-format
msgid "loop: can't delete device %s: %s\n"
msgstr ""

#: mount/lomount.c:972
#, c-format
msgid "This mount was compiled without loop support. Please recompile.\n"
msgstr ""

#: mount/lomount.c:1017
#, c-format
msgid ""
" %1$s loop_device                             give info\n"
" %1$s -a | --all                              list all used\n"
" %1$s -d | --detach <loopdev> [<loopdev> ...] delete\n"
" %1$s -f | --find                             find unused\n"
" %1$s -c | --set-capacity <loopdev>           resize\n"
" %1$s -j | --associated <file> [-o <num>]     list all associated with "
"<file>\n"
" %1$s [options] {-f|--find|loopdev} <file>    setup\n"
msgstr ""

#: mount/lomount.c:1027
msgid ""
" -e, --encryption <type> enable data encryption with specified <name/num>\n"
" -h, --help              this help\n"
" -o, --offset <num>      start at offset <num> into file\n"
"     --sizelimit <num>   loop limited to only <num> bytes of the file\n"
" -p, --pass-fd <num>     read passphrase from file descriptor <num>\n"
" -r, --read-only         setup read-only loop device\n"
"     --show              print device name (with -f <file>)\n"
" -v, --verbose           verbose mode\n"
"\n"
msgstr ""

#: mount/lomount.c:1153
#, c-format
msgid "%s: invalid offset '%s' specified"
msgstr ""

#: mount/lomount.c:1157
#, c-format
msgid "%s: invalid sizelimit '%s' specified"
msgstr ""

#: mount/lomount.c:1172 mount/lomount.c:1212
#, c-format
msgid "Loop device is %s\n"
msgstr ""

#: mount/lomount.c:1199
#, c-format
msgid "stolen loop=%s...trying again\n"
msgstr ""

#: mount/lomount.c:1209
#, c-format
msgid "%s: %s: device is busy"
msgstr ""

#: mount/lomount.c:1226
#, c-format
msgid "No loop support was available at compile time. Please recompile.\n"
msgstr ""

#: mount/mount.c:313
#, c-format
msgid ""
"\n"
"mount: warning: /etc/mtab is not writable (e.g. read-only filesystem).\n"
"       It's possible that information reported by mount(8) is not\n"
"       up to date. For actual information about system mount points\n"
"       check the /proc/mounts file.\n"
"\n"
msgstr ""

#: mount/mount.c:363
#, c-format
msgid "mount: improperly quoted option string '%s'"
msgstr ""

#: mount/mount.c:396
#, c-format
msgid "mount: translated %s '%s' to '%s'\n"
msgstr ""

#: mount/mount.c:452
#, c-format
msgid "mount: SELinux *context= options are ignore on remount.\n"
msgstr ""

#: mount/mount.c:625
#, c-format
msgid "mount: according to mtab, %s is already mounted on %s"
msgstr ""

#: mount/mount.c:630
#, c-format
msgid "mount: according to mtab, %s is mounted on %s"
msgstr ""

#: mount/mount.c:654
#, c-format
msgid "mount: can't open %s for writing: %s"
msgstr ""

#: mount/mount.c:671
#, c-format
msgid "mount: error writing %s: %s"
msgstr ""

#: mount/mount.c:679
#, c-format
msgid "mount: error changing mode of %s: %s"
msgstr ""

#: mount/mount.c:785
#, c-format
msgid "mount: cannot set group id: %s"
msgstr ""

#: mount/mount.c:788
#, c-format
msgid "mount: cannot set user id: %s"
msgstr ""

#: mount/mount.c:835 mount/mount.c:2213
#, c-format
msgid "mount: cannot fork: %s"
msgstr ""

#: mount/mount.c:971
#, c-format
msgid "Trying %s\n"
msgstr ""

#: mount/mount.c:999
#, c-format
msgid "mount: you didn't specify a filesystem type for %s\n"
msgstr ""

#: mount/mount.c:1002
#, c-format
msgid "       I will try all types mentioned in %s or %s\n"
msgstr ""

#: mount/mount.c:1005
#, c-format
msgid "       and it looks like this is swapspace\n"
msgstr ""

#: mount/mount.c:1007
#, c-format
msgid "       I will try type %s\n"
msgstr ""

#: mount/mount.c:1032
#, c-format
msgid "%s looks like swapspace - not mounted"
msgstr ""

#: mount/mount.c:1040
#, c-format
msgid ""
"mount: %s: more filesystems detected. This should not happen,\n"
"       use -t <type> to explicitly specify the filesystem type or\n"
"       use wipefs(8) to clean up the device.\n"
msgstr ""

#: mount/mount.c:1128
msgid "mount failed"
msgstr ""

#: mount/mount.c:1130
#, c-format
msgid "mount: only root can mount %s on %s"
msgstr ""

#: mount/mount.c:1217
msgid "mount: loop device specified twice"
msgstr ""

#: mount/mount.c:1222
msgid "mount: type specified twice"
msgstr ""

#: mount/mount.c:1250
#, c-format
msgid "mount: skipping the setup of a loop device\n"
msgstr ""

#: mount/mount.c:1262
#, c-format
msgid "mount: enabling autoclear loopdev flag\n"
msgstr ""

#: mount/mount.c:1270
#, c-format
msgid "mount: invalid offset '%s' specified"
msgstr ""

#: mount/mount.c:1274
#, c-format
msgid "mount: invalid sizelimit '%s' specified"
msgstr ""

#: mount/mount.c:1279
#, c-format
msgid "mount: according to mtab %s is already mounted on %s as loop"
msgstr ""

#: mount/mount.c:1289
#, c-format
msgid "mount: going to use the loop device %s\n"
msgstr ""

#: mount/mount.c:1298
#, c-format
msgid "mount: stolen loop=%s ...trying again\n"
msgstr ""

#: mount/mount.c:1303
#, c-format
msgid "mount: stolen loop=%s"
msgstr ""

#: mount/mount.c:1308
#, c-format
msgid "mount: failed setting up loop device\n"
msgstr ""

#: mount/mount.c:1319
#, c-format
msgid "mount: setup loop device successfully\n"
msgstr ""

#: mount/mount.c:1403 mount/mount.c:1435
#, c-format
msgid "mount: no %s found - creating it..\n"
msgstr ""

#: mount/mount.c:1458
msgid "mount: argument to -p or --pass-fd must be a number"
msgstr ""

#: mount/mount.c:1471
#, c-format
msgid "mount: cannot open %s for setting speed"
msgstr ""

#: mount/mount.c:1474
#, c-format
msgid "mount: cannot set speed: %s"
msgstr ""

#: mount/mount.c:1566
#, c-format
msgid "mount: according to mtab, %s is already mounted on %s\n"
msgstr ""

#: mount/mount.c:1653
#, c-format
msgid "mount: warning: %s seems to be mounted read-write.\n"
msgstr ""

#: mount/mount.c:1665
#, c-format
msgid "mount: warning: %s seems to be mounted read-only.\n"
msgstr ""

#: mount/mount.c:1706
msgid ""
"mount: I could not determine the filesystem type, and none was specified"
msgstr ""

#: mount/mount.c:1709
msgid "mount: you must specify the filesystem type"
msgstr ""

#: mount/mount.c:1712
msgid "mount: mount failed"
msgstr ""

#: mount/mount.c:1718 mount/mount.c:1755
#, c-format
msgid "mount: mount point %s is not a directory"
msgstr ""

#: mount/mount.c:1720
msgid "mount: permission denied"
msgstr ""

#: mount/mount.c:1722
msgid "mount: must be superuser to use mount"
msgstr ""

#: mount/mount.c:1726 mount/mount.c:1730
#, c-format
msgid "mount: %s is busy"
msgstr ""

#: mount/mount.c:1732
msgid "mount: proc already mounted"
msgstr ""

#: mount/mount.c:1734
#, c-format
msgid "mount: %s already mounted or %s busy"
msgstr ""

#: mount/mount.c:1740
#, c-format
msgid "mount: mount point %s does not exist"
msgstr ""

#: mount/mount.c:1742
#, c-format
msgid "mount: mount point %s is a symbolic link to nowhere"
msgstr ""

#: mount/mount.c:1747
#, c-format
msgid "mount: special device %s does not exist"
msgstr ""

#: mount/mount.c:1759
#, c-format
msgid ""
"mount: special device %s does not exist\n"
"       (a path prefix is not a directory)\n"
msgstr ""

#: mount/mount.c:1771
#, c-format
msgid "mount: %s not mounted or bad option"
msgstr ""

#: mount/mount.c:1773
#, c-format
msgid ""
"mount: wrong fs type, bad option, bad superblock on %s,\n"
"       missing codepage or helper program, or other error"
msgstr ""

#: mount/mount.c:1780
msgid ""
"       (for several filesystems (e.g. nfs, cifs) you might\n"
"       need a /sbin/mount.<type> helper program)"
msgstr ""

#: mount/mount.c:1789
msgid ""
"       (could this be the IDE device where you in fact use\n"
"       ide-scsi so that sr0 or sda or so is needed?)"
msgstr ""

#: mount/mount.c:1794
msgid ""
"       (aren't you trying to mount an extended partition,\n"
"       instead of some logical partition inside?)"
msgstr ""

#: mount/mount.c:1801
msgid ""
"       In some cases useful info is found in syslog - try\n"
"       dmesg | tail  or so\n"
msgstr ""

#: mount/mount.c:1807
msgid "mount table full"
msgstr ""

#: mount/mount.c:1809
#, c-format
msgid "mount: %s: can't read superblock"
msgstr ""

#: mount/mount.c:1815
#, c-format
msgid "mount: %s: unknown device"
msgstr ""

#: mount/mount.c:1820
#, c-format
msgid "mount: unknown filesystem type '%s'"
msgstr ""

#: mount/mount.c:1832
#, c-format
msgid "mount: probably you meant %s"
msgstr ""

#: mount/mount.c:1835
msgid "mount: maybe you meant 'iso9660'?"
msgstr ""

#: mount/mount.c:1838
msgid "mount: maybe you meant 'vfat'?"
msgstr ""

#: mount/mount.c:1841
#, c-format
msgid "mount: %s has wrong device number or fs type %s not supported"
msgstr ""

#: mount/mount.c:1849
#, c-format
msgid "mount: %s is not a block device, and stat fails?"
msgstr ""

#: mount/mount.c:1851
#, c-format
msgid ""
"mount: the kernel does not recognize %s as a block device\n"
"       (maybe `modprobe driver'?)"
msgstr ""

#: mount/mount.c:1854
#, c-format
msgid "mount: %s is not a block device (maybe try `-o loop'?)"
msgstr ""

#: mount/mount.c:1857
#, c-format
msgid "mount: %s is not a block device"
msgstr ""

#: mount/mount.c:1862
#, c-format
msgid "mount: %s is not a valid block device"
msgstr ""

#: mount/mount.c:1865
msgid "block device "
msgstr ""

#: mount/mount.c:1867
#, c-format
msgid "mount: cannot mount %s%s read-only"
msgstr ""

#: mount/mount.c:1871
#, c-format
msgid "mount: %s%s is write-protected but explicit `-w' flag given"
msgstr ""

#: mount/mount.c:1875
#, c-format
msgid "mount: cannot remount %s%s read-write, is write-protected"
msgstr ""

#: mount/mount.c:1890
#, c-format
msgid "mount: %s%s is write-protected, mounting read-only"
msgstr ""

#: mount/mount.c:1898
#, c-format
msgid "mount: no medium found on %s"
msgstr ""

#: mount/mount.c:1916
#, c-format
msgid ""
"mount: %s does not contain SELinux labels.\n"
"       You just mounted an file system that supports labels which does not\n"
"       contain labels, onto an SELinux box. It is likely that confined\n"
"       applications will generate AVC messages and not be allowed access to\n"
"       this file system.  For more details see restorecon(8) and mount(8).\n"
msgstr ""

#: mount/mount.c:1996
#, c-format
msgid "mount: no type was given - I'll assume nfs because of the colon\n"
msgstr ""

#: mount/mount.c:2002
#, c-format
msgid "mount: no type was given - I'll assume cifs because of the // prefix\n"
msgstr ""

#: mount/mount.c:2101
#, c-format
msgid "mount: ignore %s (unparsable offset= option)\n"
msgstr ""

#: mount/mount.c:2114
#, c-format
msgid "mount: %s already mounted on %s\n"
msgstr ""

#: mount/mount.c:2295
#, c-format
msgid ""
"Usage: mount -V                 : print version\n"
"       mount -h                 : print this help\n"
"       mount                    : list mounted filesystems\n"
"       mount -l                 : idem, including volume labels\n"
"So far the informational part. Next the mounting.\n"
"The command is `mount [-t fstype] something somewhere'.\n"
"Details found in /etc/fstab may be omitted.\n"
"       mount -a [-t|-O] ...     : mount all stuff from /etc/fstab\n"
"       mount device             : mount device at the known place\n"
"       mount directory          : mount known device here\n"
"       mount -t type dev dir    : ordinary mount command\n"
"Note that one does not really mount a device, one mounts\n"
"a filesystem (of the given type) found on the device.\n"
"One can also mount an already visible directory tree elsewhere:\n"
"       mount --bind olddir newdir\n"
"or move a subtree:\n"
"       mount --move olddir newdir\n"
"One can change the type of mount containing the directory dir:\n"
"       mount --make-shared dir\n"
"       mount --make-slave dir\n"
"       mount --make-private dir\n"
"       mount --make-unbindable dir\n"
"One can change the type of all the mounts in a mount subtree\n"
"containing the directory dir:\n"
"       mount --make-rshared dir\n"
"       mount --make-rslave dir\n"
"       mount --make-rprivate dir\n"
"       mount --make-runbindable dir\n"
"A device can be given by name, say /dev/hda1 or /dev/cdrom,\n"
"or by label, using  -L label  or by uuid, using  -U uuid .\n"
"Other options: [-nfFrsvw] [-o options] [-p passwdfd].\n"
"For many more details, say  man 8 mount .\n"
msgstr ""

#: mount/mount.c:2627
#, c-format
msgid "mount: only root can do that (effective UID is %u)"
msgstr ""

#: mount/mount.c:2630
msgid "mount: only root can do that"
msgstr ""

#: mount/mount.c:2641
msgid "nothing was mounted"
msgstr ""

#: mount/mount.c:2659 mount/mount.c:2685
msgid "mount: no such partition found"
msgstr ""

#: mount/mount.c:2662
#, c-format
msgid "mount: can't find %s in %s or %s"
msgstr ""

#: mount/mount_mntent.c:108
#, c-format
msgid "[mntent]: warning: no final newline at the end of %s\n"
msgstr ""

#: mount/mount_mntent.c:158
#, c-format
msgid "[mntent]: line %d in %s is bad%s\n"
msgstr ""

#: mount/mount_mntent.c:161
msgid "; rest of file ignored"
msgstr ""

#: mount/sundries.c:31
msgid "bug in xstrndup call"
msgstr ""

#: mount/sundries.c:226 mount/sundries.c:284 mount/sundries.c:299
#: mount/xmalloc.c:11
msgid "not enough memory"
msgstr ""

#: mount/swapon.c:93
msgid ""
"\n"
"The <spec> parameter:\n"
" -L <label>             LABEL of device to be used\n"
" -U <uuid>              UUID of device to be used\n"
" LABEL=<label>          LABEL of device to be used\n"
" UUID=<uuid>            UUID of device to be used\n"
" <device>               name of device to be used\n"
" <file>                 name of file to be used\n"
"\n"
msgstr ""

#: mount/swapon.c:104 mount/swapon.c:125
#, fuzzy, c-format
msgid " %s [options] [<spec>]\n"
msgstr "用法: %s [ -n ] device\n"

#: mount/swapon.c:107
msgid ""
" -a, --all              enable all swaps from /etc/fstab\n"
" -d, --discard          discard freed pages before they are reused\n"
" -e, --ifexists         silently skip devices that do not exis\n"
" -f, --fixpgsz          reinitialize the swap space if necessary\n"
" -h, --help             display help and exit\n"
" -p, --priority <prio>  specify the priority of the swap device.\n"
" -s, --summary          display summary about used swap devices and exit\n"
" -v, --verbose          verbose mode\n"
" -V, --version          display version and exit\n"
msgstr ""

#: mount/swapon.c:128
msgid ""
" -a, --all              disable all swaps from /proc/swaps\n"
" -h, --help             display help and exit\n"
" -v, --verbose          verbose mode\n"
" -V, --version          display version and exit\n"
msgstr ""

#: mount/swapon.c:162
#, c-format
msgid "%s: unexpected file format"
msgstr ""

#: mount/swapon.c:259
#, c-format
msgid "%s: reinitializing the swap."
msgstr ""

#: mount/swapon.c:279
#, fuzzy
msgid "execv failed"
msgstr "查找失败"

#: mount/swapon.c:287
msgid "waitpid failed"
msgstr ""

#: mount/swapon.c:311
#, fuzzy, c-format
msgid "%s: lseek failed"
msgstr "查找失败"

#: mount/swapon.c:317
#, c-format
msgid "%s: write signature failed"
msgstr ""

#: mount/swapon.c:403
#, c-format
msgid "%s: found swap signature: version %d, page-size %d, %s byte order"
msgstr ""

#: mount/swapon.c:408
msgid "different"
msgstr ""

#: mount/swapon.c:408
msgid "same"
msgstr ""

#: mount/swapon.c:433
#, c-format
msgid "%s: insecure permissions %04o, %04o suggested."
msgstr ""

#: mount/swapon.c:438
#, c-format
msgid "%s: insecure file owner %d, 0 (root) suggested."
msgstr ""

#: mount/swapon.c:445
#, c-format
msgid "%s: skipping - it appears to have holes."
msgstr ""

#: mount/swapon.c:459
#, fuzzy, c-format
msgid "%s: get size failed"
msgstr "查找失败"

#: mount/swapon.c:465
#, c-format
msgid "%s: read swap header failed"
msgstr ""

#: mount/swapon.c:475
#, c-format
msgid "%s: pagesize=%d, swapsize=%llu, devsize=%llu"
msgstr ""

#: mount/swapon.c:480
#, c-format
msgid "%s: last_page 0x%08llx is larger than actual size of swapspace"
msgstr ""

#: mount/swapon.c:485
#, c-format
msgid "%s: swap format pagesize does not match."
msgstr ""

#: mount/swapon.c:490
#, c-format
msgid ""
"%s: swap format pagesize does not match. (Use --fixpgsz to reinitialize it.)"
msgstr ""

#: mount/swapon.c:499
#, c-format
msgid "%s: software suspend data detected. Rewriting the swap signature."
msgstr ""

#: mount/swapon.c:523 mount/swapon.c:578
#, c-format
msgid "%s on %s\n"
msgstr ""

#: mount/swapon.c:548
#, fuzzy, c-format
msgid "%s: swapon failed"
msgstr "%s 失败.\n"

#: mount/swapon.c:555
#, c-format
msgid "cannot find the device for %s"
msgstr ""

#: mount/swapon.c:590
msgid "Not superuser."
msgstr ""

#: mount/swapon.c:593
#, fuzzy, c-format
msgid "%s: swapoff failed"
msgstr "%s 失败.\n"

#: mount/swapon.c:864
#, c-format
msgid "'%s' is unsupported program name (must be 'swapon' or 'swapoff')."
msgstr ""

#: mount/umount.c:42
#, c-format
msgid "umount: compiled without support for -f\n"
msgstr ""

#: mount/umount.c:131
#, c-format
msgid "umount: cannot set group id: %s"
msgstr ""

#: mount/umount.c:134
#, c-format
msgid "umount: cannot set user id: %s"
msgstr ""

#: mount/umount.c:163
#, c-format
msgid "umount: cannot fork: %s"
msgstr ""

#: mount/umount.c:184
#, c-format
msgid "umount: %s: invalid block device"
msgstr ""

#: mount/umount.c:186
#, c-format
msgid "umount: %s: not mounted"
msgstr ""

#: mount/umount.c:188
#, c-format
msgid "umount: %s: can't write superblock"
msgstr ""

#: mount/umount.c:192
#, c-format
msgid ""
"umount: %s: device is busy.\n"
"        (In some cases useful info about processes that use\n"
"         the device is found by lsof(8) or fuser(1))"
msgstr ""

#: mount/umount.c:197
#, c-format
msgid "umount: %s: not found"
msgstr ""

#: mount/umount.c:199
#, c-format
msgid "umount: %s: must be superuser to umount"
msgstr ""

#: mount/umount.c:201
#, c-format
msgid "umount: %s: block devices not permitted on fs"
msgstr ""

#: mount/umount.c:203
#, c-format
msgid "umount: %s: %s"
msgstr ""

#: mount/umount.c:231
#, c-format
msgid "umount: internal error: invalid abs path: %s"
msgstr ""

#: mount/umount.c:246
#, fuzzy, c-format
msgid "umount: failed to chdir to %s: %s"
msgstr "不能读 inodes"

#: mount/umount.c:250
#, c-format
msgid "umount: failed to obtain current directory: %s"
msgstr ""

#: mount/umount.c:254
#, c-format
msgid "umount: mountpoint moved (%s -> %s)"
msgstr ""

#: mount/umount.c:257
#, c-format
msgid "current directory moved to %s\n"
msgstr ""

#: mount/umount.c:329
#, c-format
msgid "no umount2, trying umount...\n"
msgstr ""

#: mount/umount.c:349
#, c-format
msgid "umount: %s busy - remounted read-only\n"
msgstr ""

#: mount/umount.c:367
#, c-format
msgid "umount: could not remount %s read-only\n"
msgstr ""

#: mount/umount.c:376
#, fuzzy, c-format
msgid "%s has been unmounted\n"
msgstr "%s 已经挂载.\t"

#: mount/umount.c:482
msgid "umount: cannot find list of filesystems to unmount"
msgstr ""

#: mount/umount.c:514
#, c-format
msgid ""
"Usage: umount -h | -V\n"
"       umount -a [-d] [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts]\n"
"       umount [-d] [-f] [-r] [-n] [-v] special | node...\n"
msgstr ""

#: mount/umount.c:558
#, fuzzy, c-format
msgid "failed to parse 'offset=%s' options\n"
msgstr "不能读 inodes"

#: mount/umount.c:566
#, c-format
msgid "device %s is associated with %s\n"
msgstr ""

#: mount/umount.c:572
#, c-format
msgid "device %s is not associated with %s\n"
msgstr ""

#: mount/umount.c:606
msgid "Cannot unmount \"\"\n"
msgstr ""

#: mount/umount.c:614
#, c-format
msgid "Trying to unmount %s\n"
msgstr ""

#: mount/umount.c:628
msgid "umount: confused when analyzing mtab"
msgstr ""

#: mount/umount.c:634
#, c-format
msgid "umount: cannot unmount %s -- %s is mounted over it on the same point"
msgstr ""

#: mount/umount.c:642
#, c-format
msgid "Could not find %s in mtab\n"
msgstr ""

#: mount/umount.c:651
#, c-format
msgid "%s is associated with %s\n"
msgstr ""

#: mount/umount.c:658
#, c-format
msgid "%s is associated with more than one loop device: not unmounting\n"
msgstr ""

#: mount/umount.c:678
#, c-format
msgid "umount: %s is not mounted (according to mtab)"
msgstr ""

#: mount/umount.c:692
#, c-format
msgid "umount: it seems %s is mounted multiple times"
msgstr ""

#: mount/umount.c:706
#, c-format
msgid "umount: %s is not in the fstab (and you are not root)"
msgstr ""

#: mount/umount.c:712
#, c-format
msgid "umount: %s mount disagrees with the fstab"
msgstr ""

#: mount/umount.c:753
#, c-format
msgid "umount: only %s can unmount %s from %s"
msgstr ""

#: mount/umount.c:849
msgid "umount: only root can do that"
msgstr ""

#: partx/partx.c:75
#, fuzzy
msgid "partition number"
msgstr "重新读取分区表"

#: partx/partx.c:76
msgid "start of the partition in sectors"
msgstr ""

#: partx/partx.c:77
msgid "end of the partition in sectors"
msgstr ""

#: partx/partx.c:78
msgid "number of sectors"
msgstr ""

#: partx/partx.c:79
msgid "human readable size"
msgstr ""

#: partx/partx.c:80
#, fuzzy
msgid "partition name"
msgstr "重新读取分区表"

#: partx/partx.c:81
msgid "partition UUID"
msgstr ""

#: partx/partx.c:82
msgid "partition table type (dos, gpt, ...)"
msgstr ""

#: partx/partx.c:83
msgid "partition flags"
msgstr ""

#: partx/partx.c:84
msgid "partition type hex or uuid"
msgstr ""

#: partx/partx.c:161
#, fuzzy, c-format
msgid "%s: failed to get partition number"
msgstr "在 write_block 中查找失败"

#: partx/partx.c:226
#, c-format
msgid "%s: error deleting partition %d"
msgstr ""

#: partx/partx.c:228
#, c-format
msgid "%s: error deleting partitions %d-%d"
msgstr ""

#: partx/partx.c:252 partx/partx.c:828
#, c-format
msgid "specified range <%d:%d> does not make sense"
msgstr ""

#: partx/partx.c:260
#, c-format
msgid "%s: partition #%d removed\n"
msgstr ""

#: partx/partx.c:265
#, fuzzy, c-format
msgid "%s: deleting partition #%d failed"
msgstr "%s 失败.\n"

#: partx/partx.c:284
#, c-format
msgid "%s: error adding partition %d"
msgstr ""

#: partx/partx.c:286
#, c-format
msgid "%s: error adding partitions %d-%d"
msgstr ""

#: partx/partx.c:323
#, c-format
msgid "%s: partition #%d added\n"
msgstr ""

#: partx/partx.c:328
#, fuzzy, c-format
msgid "%s: adding partition #%d failed"
msgstr "%s 失败.\n"

#: partx/partx.c:365
#, c-format
msgid "#%2d: %9ju-%9ju (%9ju sectors, %6ju MB)\n"
msgstr ""

#: partx/partx.c:551
#, fuzzy, c-format
msgid "failed to initialize blkid filter for '%s'"
msgstr "不能为 inodes 分配缓冲区"

#: partx/partx.c:559
#, fuzzy, c-format
msgid "%s: failed to read partition table"
msgstr "重新读取分区表"

#: partx/partx.c:565
#, c-format
msgid "%s: partition table type '%s' detected\n"
msgstr ""

#: partx/partx.c:569
#, c-format
msgid "%s: %s partition table does not contains usable partitions"
msgstr ""

#: partx/partx.c:583
#, c-format
msgid " %s [-a|-d|-s] [--nr <n:m> | <partition>] <disk>\n"
msgstr ""

#: partx/partx.c:587
msgid ""
" -a, --add            add specified partitions or all of them\n"
" -d, --delete         delete specified partitions or all of them\n"
" -l, --list           list partitions (DEPRECATED)\n"
" -s, --show           list partitions\n"
"\n"
" -b, --bytes          print SIZE in bytes rather than in human readable "
"format\n"
" -g, --noheadings     don't print headings for --show\n"
" -P, --pairs          use key=\"value\" output format\n"
" -r, --raw            use raw output format\n"
" -t, --type <type>    specify the partition type (dos, bsd, solaris, etc.)\n"
" -n, --nr <n:m>       specify the range of partitions (e.g. --nr 2:4)\n"
" -o, --output <type>  define which output columns to use\n"
" -h, --help           print this help\n"
msgstr ""

#: partx/partx.c:601
#, fuzzy
msgid ""
"\n"
"Available columns (for --show, --raw or --pairs):\n"
msgstr "可用的命令:\n"

#: partx/partx.c:606
#, c-format
msgid ""
"\n"
"For more information see partx(8).\n"
msgstr ""

#: partx/partx.c:614
#, c-format
msgid "the options %s are mutually exclusive"
msgstr ""

#: partx/partx.c:679
#, fuzzy
msgid "failed to parse --nr <M-N> range"
msgstr "不能读 inodes"

#: partx/partx.c:777
msgid "--nr and <partition> are mutually exclusive"
msgstr ""

#: partx/partx.c:796
#, c-format
msgid "partition: %s, disk: %s, lower: %d, upper: %d\n"
msgstr ""

#: partx/partx.c:815
#, fuzzy, c-format
msgid "%s: failed to initialize blkid prober"
msgstr "不能为 inodes 分配缓冲区"

#: schedutils/chrt.c:63
#, c-format
msgid ""
"\n"
"chrt - manipulate real-time attributes of a process\n"
"\n"
"Set policy:\n"
"  chrt [options] <policy> <priority> {<pid> | <command> [<arg> ...]}\n"
"\n"
"Get policy:\n"
"  chrt [options] {<pid> | <command> [<arg> ...]}\n"
msgstr ""

#: schedutils/chrt.c:70
#, c-format
msgid ""
"\n"
"Scheduling policies:\n"
"  -b | --batch         set policy to SCHED_BATCH\n"
"  -f | --fifo          set policy to SCHED_FIFO\n"
"  -i | --idle          set policy to SCHED_IDLE\n"
"  -o | --other         set policy to SCHED_OTHER\n"
"  -r | --rr            set policy to SCHED_RR (default)\n"
msgstr ""

#: schedutils/chrt.c:79
#, c-format
msgid ""
"\n"
"Scheduling flags:\n"
"  -R | --reset-on-fork set SCHED_RESET_ON_FORK for FIFO or RR\n"
msgstr ""

#: schedutils/chrt.c:83
#, c-format
msgid ""
"\n"
"Options:\n"
"  -a | --all-tasks     operate on all the tasks (threads) for a given pid\n"
"  -h | --help          display this help\n"
"  -m | --max           show min and max valid priorities\n"
"  -p | --pid           operate on existing given pid\n"
"  -v | --verbose       display status information\n"
"  -V | --version       output version information\n"
"\n"
msgstr ""

#: schedutils/chrt.c:105
#, c-format
msgid "failed to get pid %d's policy"
msgstr ""

#: schedutils/chrt.c:108
#, c-format
msgid "pid %d's new scheduling policy: "
msgstr ""

#: schedutils/chrt.c:110
#, c-format
msgid "pid %d's current scheduling policy: "
msgstr ""

#: schedutils/chrt.c:143
msgid "unknown scheduling policy"
msgstr ""

#: schedutils/chrt.c:147
#, c-format
msgid "failed to get pid %d's attributes"
msgstr ""

#: schedutils/chrt.c:150
#, c-format
msgid "pid %d's new scheduling priority: %d\n"
msgstr ""

#: schedutils/chrt.c:153
#, c-format
msgid "pid %d's current scheduling priority: %d\n"
msgstr ""

#: schedutils/chrt.c:188
#, c-format
msgid "SCHED_%s min/max priority\t: %d/%d\n"
msgstr ""

#: schedutils/chrt.c:191
#, c-format
msgid "SCHED_%s not supported?\n"
msgstr ""

#: schedutils/chrt.c:256 schedutils/ionice.c:163 schedutils/ionice.c:211
#: schedutils/ionice.c:221 schedutils/taskset.c:159
#, fuzzy
msgid "failed to parse pid"
msgstr "不能读 inodes"

#: schedutils/chrt.c:285 schedutils/chrt.c:318
msgid "cannot obtain the list of tasks"
msgstr ""

#: schedutils/chrt.c:297
msgid "failed to parse priority"
msgstr ""

#: schedutils/chrt.c:303
msgid ""
"SCHED_RESET_ON_FORK flag is suppoted for SCHED_FIFO and SCHED_RR policies "
"only"
msgstr ""

#: schedutils/chrt.c:321
#, fuzzy, c-format
msgid "failed to set tid %d's policy"
msgstr "不能读 inodes"

#: schedutils/chrt.c:324
#, c-format
msgid "failed to set pid %d's policy"
msgstr ""

#: schedutils/chrt.c:333 term-utils/script.c:446
#, c-format
msgid "failed to execute %s"
msgstr ""

#: schedutils/ionice.c:75
msgid "ioprio_get failed"
msgstr ""

#: schedutils/ionice.c:97
#, fuzzy
msgid "ioprio_set failed"
msgstr "查找失败"

#: schedutils/ionice.c:103
#, c-format
msgid ""
"\n"
"%1$s - sets or gets process io scheduling class and priority.\n"
"\n"
"Usage:\n"
"  %1$s [OPTION] -p PID [PID...]\n"
"  %1$s [OPTION] COMMAND\n"
"\n"
"Options:\n"
"  -c, --class <class>   scheduling class name or number\n"
"                           0: none, 1: realtime, 2: best-effort, 3: idle\n"
"  -n, --classdata <num> scheduling class data\n"
"                           0-7 for realtime and best-effort classes\n"
"  -p, --pid=PID         view or modify already running process\n"
"  -t, --ignore          ignore failures\n"
"  -V, --version         output version information and exit\n"
"  -h, --help            display this help and exit\n"
"\n"
msgstr ""

#: schedutils/ionice.c:146
#, fuzzy
msgid "failed to parse class data"
msgstr "不能读 inodes"

#: schedutils/ionice.c:152
#, fuzzy
msgid "failed to parse class"
msgstr "不能读 inodes"

#: schedutils/ionice.c:157
#, fuzzy, c-format
msgid "unknown scheduling class: '%s'"
msgstr "%s: 未知命令: %s\n"

#: schedutils/ionice.c:181
msgid "ignoring given class data for none class"
msgstr ""

#: schedutils/ionice.c:189
msgid "ignoring given class data for idle class"
msgstr ""

#: schedutils/ionice.c:194
#, fuzzy, c-format
msgid "unknown prio class %d"
msgstr "%s: 未知命令: %s\n"

#: schedutils/ionice.c:230 schedutils/taskset.c:236
#, fuzzy, c-format
msgid "executing %s failed"
msgstr "%s 失败.\n"

#: schedutils/taskset.c:51
#, c-format
msgid ""
"Usage: %s [options] [mask | cpu-list] [pid|cmd [args...]]\n"
"\n"
msgstr ""

#: schedutils/taskset.c:55
#, c-format
msgid ""
"Options:\n"
" -a, --all-tasks         operate on all the tasks (threads) for a given pid\n"
" -p, --pid               operate on existing given pid\n"
" -c, --cpu-list          display and specify cpus in list format\n"
" -h, --help              display this help\n"
" -V, --version           output version information\n"
"\n"
msgstr ""

#: schedutils/taskset.c:63
#, c-format
msgid ""
"The default behavior is to run a new command:\n"
"    %1$s 03 sshd -b 1024\n"
"You can retrieve the mask of an existing task:\n"
"    %1$s -p 700\n"
"Or set it:\n"
"    %1$s -p 03 700\n"
"List format uses a comma-separated list instead of a mask:\n"
"    %1$s -pc 0,3,7-11 700\n"
"Ranges in list format can take a stride argument:\n"
"    e.g. 0-31:2 is equivalent to mask 0x55555555\n"
msgstr ""

#: schedutils/taskset.c:75
#, c-format
msgid ""
"\n"
"For more information see taskset(1).\n"
msgstr ""

#: schedutils/taskset.c:86
#, c-format
msgid "pid %d's new affinity list: %s\n"
msgstr ""

#: schedutils/taskset.c:87
#, c-format
msgid "pid %d's current affinity list: %s\n"
msgstr ""

#: schedutils/taskset.c:90
#, c-format
msgid "pid %d's new affinity mask: %s\n"
msgstr ""

#: schedutils/taskset.c:91
#, c-format
msgid "pid %d's current affinity mask: %s\n"
msgstr ""

#: schedutils/taskset.c:96
#, fuzzy
msgid "conversion from cpuset to string failed"
msgstr "查找失败"

#: schedutils/taskset.c:106 schedutils/taskset.c:122
#, fuzzy, c-format
msgid "failed to get pid %d's affinity"
msgstr "不能读 inodes"

#: schedutils/taskset.c:116
#, fuzzy, c-format
msgid "failed to set pid %d's affinity"
msgstr "不能读 inodes"

#: schedutils/taskset.c:183
msgid "cannot determine NR_CPUS; aborting"
msgstr ""

#: schedutils/taskset.c:192 schedutils/taskset.c:205
#, fuzzy
msgid "cpuset_alloc failed"
msgstr "查找失败"

#: schedutils/taskset.c:212
#, fuzzy, c-format
msgid "failed to parse CPU list: %s"
msgstr "不能读 inodes"

#: schedutils/taskset.c:215
#, fuzzy, c-format
msgid "failed to parse CPU mask: %s"
msgstr "不能读 inodes"

#: sys-utils/ctrlaltdel.c:24
msgid "You must be root to set the Ctrl-Alt-Del behaviour"
msgstr ""

#: sys-utils/ctrlaltdel.c:33
#, fuzzy, c-format
msgid "Usage: %s hard|soft"
msgstr "用法:\n"

#: sys-utils/cytune.c:112
#, c-format
msgid ""
"File %s, For threshold value %lu, Maximum characters in fifo were %d,\n"
"and the maximum transfer rate in characters/second was %f\n"
msgstr ""

#: sys-utils/cytune.c:123
#, c-format
msgid ""
"File %s, For threshold value %lu and timrout value %lu, Maximum characters "
"in fifo were %d,\n"
"and the maximum transfer rate in characters/second was %f\n"
msgstr ""

#: sys-utils/cytune.c:187
#, c-format
msgid "Invalid interval value: %s\n"
msgstr ""

#: sys-utils/cytune.c:195
#, c-format
msgid "Invalid set value: %s\n"
msgstr ""

#: sys-utils/cytune.c:203
#, c-format
msgid "Invalid default value: %s\n"
msgstr ""

#: sys-utils/cytune.c:211
#, c-format
msgid "Invalid set time value: %s\n"
msgstr ""

#: sys-utils/cytune.c:219
#, c-format
msgid "Invalid default time value: %s\n"
msgstr ""

#: sys-utils/cytune.c:236
#, c-format
msgid ""
"Usage: %s [-q [-i interval]] ([-s value]|[-S value]) ([-t value]|[-T value]) "
"[-g|-G] file [file...]\n"
msgstr ""

#: sys-utils/cytune.c:248 sys-utils/cytune.c:267 sys-utils/cytune.c:287
#: sys-utils/cytune.c:333
#, c-format
msgid "Can't open %s: %s\n"
msgstr ""

#: sys-utils/cytune.c:255
#, c-format
msgid "Can't set %s to threshold %d: %s\n"
msgstr ""

#: sys-utils/cytune.c:274
#, c-format
msgid "Can't set %s to time threshold %d: %s\n"
msgstr ""

#: sys-utils/cytune.c:292 sys-utils/cytune.c:345 sys-utils/cytune.c:376
#, c-format
msgid "Can't get threshold for %s: %s\n"
msgstr ""

#: sys-utils/cytune.c:298 sys-utils/cytune.c:351 sys-utils/cytune.c:382
#, c-format
msgid "Can't get timeout for %s: %s\n"
msgstr ""

#: sys-utils/cytune.c:304
#, c-format
msgid "%s: %ld current threshold and %ld current timeout\n"
msgstr ""

#: sys-utils/cytune.c:307
#, c-format
msgid "%s: %ld default threshold and %ld default timeout\n"
msgstr ""

#: sys-utils/cytune.c:321
msgid "Can't set signal handler"
msgstr ""

#: sys-utils/cytune.c:325 sys-utils/cytune.c:360 sys-utils/dmesg.c:328
msgid "gettimeofday failed"
msgstr ""

#: sys-utils/cytune.c:338 sys-utils/cytune.c:370
#, c-format
msgid "Can't issue CYGETMON on %s: %s\n"
msgstr ""

#: sys-utils/cytune.c:413
#, c-format
msgid ""
"%s: %lu ints, %lu/%lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
msgstr ""

#: sys-utils/cytune.c:419
#, c-format
msgid "   %f int/sec; %f rec, %f send (char/sec)\n"
msgstr ""

#: sys-utils/cytune.c:424
#, c-format
msgid ""
"%s: %lu ints, %lu chars; fifo: %lu thresh, %lu tmout, %lu max, %lu now\n"
msgstr ""

#: sys-utils/cytune.c:430
#, c-format
msgid "   %f int/sec; %f rec (char/sec)\n"
msgstr ""

#: sys-utils/dmesg.c:64
msgid "system is unusable"
msgstr ""

#: sys-utils/dmesg.c:65
msgid "action must be taken immediately"
msgstr ""

#: sys-utils/dmesg.c:66
msgid "critical conditions"
msgstr ""

#: sys-utils/dmesg.c:67
#, fuzzy
msgid "error conditions"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/dmesg.c:68
msgid "warning conditions"
msgstr ""

#: sys-utils/dmesg.c:69
msgid "normal but significant condition"
msgstr ""

#: sys-utils/dmesg.c:70
msgid "informational"
msgstr ""

#: sys-utils/dmesg.c:71
msgid "debug-level messages"
msgstr ""

#: sys-utils/dmesg.c:85
msgid "kernel messages"
msgstr ""

#: sys-utils/dmesg.c:86
msgid "random user-level messages"
msgstr ""

#: sys-utils/dmesg.c:87
#, fuzzy
msgid "mail system"
msgstr "Filesystem state=%d\n"

#: sys-utils/dmesg.c:88
msgid "system daemons"
msgstr ""

#: sys-utils/dmesg.c:89
msgid "security/authorization messages"
msgstr ""

#: sys-utils/dmesg.c:90
msgid "messages generated internally by syslogd"
msgstr ""

#: sys-utils/dmesg.c:91
msgid "line printer subsystem"
msgstr ""

#: sys-utils/dmesg.c:92
msgid "network news subsystem"
msgstr ""

#: sys-utils/dmesg.c:93
msgid "UUCP subsystem"
msgstr ""

#: sys-utils/dmesg.c:94
msgid "clock daemon"
msgstr ""

#: sys-utils/dmesg.c:95
msgid "security/authorization messages (private)"
msgstr ""

#: sys-utils/dmesg.c:96
msgid "ftp daemon"
msgstr ""

#: sys-utils/dmesg.c:137
msgid ""
" -C, --clear                 clear the kernel ring buffer\n"
" -c, --read-clear            read and clear all messages\n"
" -D, --console-off           disable printing messages to console\n"
" -d, --show-delta            show time delta between printed messages\n"
" -E, --console-on            enable printing messages to console\n"
" -f, --facility <list>       restrict output to defined facilities\n"
" -h, --help                  display this help and exit\n"
" -k, --kernel                display kernel messages\n"
" -l, --level <list>          restrict output to defined levels\n"
" -n, --console-level <level> set level of messages printed to console\n"
" -r, --raw                   print the raw message buffer\n"
" -s, --buffer-size <size>    buffer size to query the kernel ring buffer\n"
" -T, --ctime                 show human readable timestamp (could be \n"
"                             inaccurate if you have used SUSPEND/RESUME)\n"
" -t, --notime                don't print messages timestamp\n"
" -u, --userspace             display userspace messages\n"
" -V, --version               output version information and exit\n"
" -x, --decode                decode facility and level to readable string\n"
msgstr ""

#: sys-utils/dmesg.c:156
msgid ""
"\n"
"Supported log facilities:\n"
msgstr ""

#: sys-utils/dmesg.c:163
msgid ""
"\n"
"Supported log levels (priorities):\n"
msgstr ""

#: sys-utils/dmesg.c:207
#, fuzzy, c-format
msgid "failed to parse level '%s'"
msgstr "不能读 inodes"

#: sys-utils/dmesg.c:209
#, fuzzy, c-format
msgid "unknown level '%s'"
msgstr "%s: 未知命令: %s\n"

#: sys-utils/dmesg.c:245
#, fuzzy, c-format
msgid "failed to parse facility '%s'"
msgstr "不能读 inodes"

#: sys-utils/dmesg.c:247
#, fuzzy, c-format
msgid "unknown facility '%s'"
msgstr "%s: 未知命令: %s\n"

#: sys-utils/dmesg.c:326
#, fuzzy
msgid "sysinfo failed"
msgstr "查找失败"

#: sys-utils/dmesg.c:420 term-utils/script.c:302 term-utils/script.c:394
#, fuzzy
msgid "write failed"
msgstr "%s 失败.\n"

#: sys-utils/dmesg.c:619
msgid ""
"clear, read-clear, console-level, console-on, and console-off options are "
"mutually exclusive"
msgstr ""

#: sys-utils/dmesg.c:667
#, fuzzy
msgid "failed to parse buffer size"
msgstr "不能读 inodes"

#: sys-utils/dmesg.c:708
msgid ""
"--raw can't be used together with level, facility, decode, delta, ctime or "
"notime options"
msgstr ""

#: sys-utils/dmesg.c:712
msgid "--notime can't be used together with ctime "
msgstr ""

#: sys-utils/dmesg.c:733
msgid "unsupported command"
msgstr ""

#: sys-utils/dmesg.c:738
#, fuzzy
msgid "klogctl failed"
msgstr "%s 失败.\n"

#: sys-utils/fallocate.c:55
#, fuzzy, c-format
msgid " %s [options] <filename>\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/fallocate.c:58
msgid ""
" -h, --help          this help\n"
" -n, --keep-size     don't modify the length of the file\n"
" -o, --offset <num>  offset of the allocation, in bytes\n"
" -l, --length <num>  length of the allocation, in bytes\n"
msgstr ""

#: sys-utils/fallocate.c:63
#, c-format
msgid ""
"\n"
"For more information see fallocate(1).\n"
msgstr ""

#: sys-utils/fallocate.c:121
msgid "no length argument specified"
msgstr ""

#: sys-utils/fallocate.c:123
msgid "invalid length value specified"
msgstr ""

#: sys-utils/fallocate.c:125
msgid "invalid offset value specified"
msgstr ""

#: sys-utils/fallocate.c:127
msgid "no filename specified."
msgstr ""

#: sys-utils/fallocate.c:132 sys-utils/fsfreeze.c:96 sys-utils/fstrim.c:130
msgid "unexpected number of arguments"
msgstr ""

#: sys-utils/fallocate.c:152
msgid "keep size mode (-n option) unsupported"
msgstr ""

#: sys-utils/fallocate.c:153
#, c-format
msgid "%s: fallocate failed"
msgstr ""

#: sys-utils/flock.c:67
#, c-format
msgid ""
" %1$s [-sxun][-w #] fd#\n"
" %1$s [-sxon][-w #] file [-c] command...\n"
" %1$s [-sxon][-w #] directory [-c] command...\n"
msgstr ""

#: sys-utils/flock.c:72
msgid ""
" -s  --shared     Get a shared lock\n"
" -x  --exclusive  Get an exclusive lock\n"
" -u  --unlock     Remove a lock\n"
" -n  --nonblock   Fail rather than wait\n"
" -w  --timeout    Wait for a limited amount of time\n"
" -o  --close      Close file descriptor before running command\n"
" -c  --command    Run a single command string through the shell\n"
" -h  --help       Display this text\n"
" -V  --version    Display version\n"
"\n"
msgstr ""

#: sys-utils/flock.c:195
#, fuzzy, c-format
msgid "%s: %s requires exactly one command argument\n"
msgstr "%s 需要一个参数\n"

#: sys-utils/flock.c:222
#, fuzzy, c-format
msgid "%s: cannot open lock file %s: %s\n"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/flock.c:234
#, c-format
msgid "%s: bad number: %s\n"
msgstr ""

#: sys-utils/flock.c:241
#, c-format
msgid "%s: requires file descriptor, file or directory\n"
msgstr ""

#: sys-utils/flock.c:299
#, fuzzy, c-format
msgid "%s: fork failed: %s\n"
msgstr "%s 失败.\n"

#: sys-utils/fsfreeze.c:42 sys-utils/fstrim.c:57
#, fuzzy, c-format
msgid " %s [options] <mount point>\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/fsfreeze.c:45
msgid ""
" -h, --help        this help\n"
" -f, --freeze      freeze the filesystem\n"
" -u, --unfreeze    unfreeze the filesystem\n"
msgstr ""

#: sys-utils/fsfreeze.c:49
msgid ""
"\n"
"For more information see fsfreeze(8).\n"
msgstr ""

#: sys-utils/fsfreeze.c:90
msgid "no action specified"
msgstr ""

#: sys-utils/fsfreeze.c:92
msgid "no filename specified"
msgstr ""

#: sys-utils/fsfreeze.c:105
#, fuzzy, c-format
msgid "%s: fstat failed"
msgstr "%s 失败.\n"

#: sys-utils/fsfreeze.c:110
#, fuzzy, c-format
msgid "%s: is not a directory"
msgstr "根 inode 不是一个目录"

#: sys-utils/fsfreeze.c:116
#, fuzzy, c-format
msgid "%s: freeze failed"
msgstr "%s 失败.\n"

#: sys-utils/fsfreeze.c:121
#, fuzzy, c-format
msgid "%s: unfreeze failed"
msgstr "%s 失败.\n"

#: sys-utils/fstrim.c:60
msgid ""
" -h, --help          this help\n"
" -o, --offset <num>  offset in bytes to discard from\n"
" -l, --length <num>  length of bytes to discard from the offset\n"
" -m, --minimum <num> minimum extent length to discard\n"
" -v, --verbose       print number of discarded bytes\n"
msgstr ""

#: sys-utils/fstrim.c:66
msgid ""
"\n"
"For more information see fstrim(1).\n"
msgstr ""

#: sys-utils/fstrim.c:102
#, fuzzy, c-format
msgid "failed to parse length: %s"
msgstr "不能读 inodes"

#: sys-utils/fstrim.c:107
#, fuzzy, c-format
msgid "failed to parse offset: %s"
msgstr "不能读 inodes"

#: sys-utils/fstrim.c:112
#, fuzzy, c-format
msgid "failed to parse minimum extent length: %s"
msgstr "不能读 inodes"

#: sys-utils/fstrim.c:125
msgid "no mountpoint specified."
msgstr ""

#: sys-utils/fstrim.c:137 sys-utils/mountpoint.c:153
#, fuzzy, c-format
msgid "%s: not a directory"
msgstr "根 inode 不是一个目录"

#: sys-utils/fstrim.c:144
#, fuzzy, c-format
msgid "%s: FITRIM ioctl failed"
msgstr "%s 失败.\n"

#. TRANSLATORS: The standard value here is a very large number.
#: sys-utils/fstrim.c:148
#, c-format
msgid "%s: %<PRIu64> bytes were trimmed\n"
msgstr ""

#: sys-utils/ipcmk.c:91
msgid ""
" -M <size>     create shared memory segment of size <size>\n"
" -S <nsems>    create semaphore array with <nsems> elements\n"
" -Q            create message queue\n"
" -p <mode>     permission for the resource (default is 0644)\n"
msgstr ""

#: sys-utils/ipcmk.c:96
msgid ""
"\n"
"For more information see ipcmk(1).\n"
msgstr ""

#: sys-utils/ipcmk.c:148
msgid "create share memory failed"
msgstr ""

#: sys-utils/ipcmk.c:150
#, c-format
msgid "Shared memory id: %d\n"
msgstr ""

#: sys-utils/ipcmk.c:156
msgid "create message queue failed"
msgstr ""

#: sys-utils/ipcmk.c:158
#, c-format
msgid "Message queue id: %d\n"
msgstr ""

#: sys-utils/ipcmk.c:164
msgid "create semaphore failed"
msgstr ""

#: sys-utils/ipcmk.c:166
#, c-format
msgid "Semaphore id: %d\n"
msgstr ""

#: sys-utils/ipcrm.c:64
#, c-format
msgid "invalid id: %s\n"
msgstr ""

#: sys-utils/ipcrm.c:82
#, c-format
msgid "cannot remove id %s (%s)\n"
msgstr ""

#: sys-utils/ipcrm.c:97
#, c-format
msgid "deprecated usage: %s {shm | msg | sem} id ...\n"
msgstr ""

#: sys-utils/ipcrm.c:124
#, c-format
msgid "unknown resource type: %s\n"
msgstr ""

#: sys-utils/ipcrm.c:128
#, c-format
msgid "resource(s) deleted\n"
msgstr ""

#: sys-utils/ipcrm.c:138
#, c-format
msgid ""
"usage: %s [ [-q msqid] [-m shmid] [-s semid]\n"
"          [-Q msgkey] [-M shmkey] [-S semkey] ... ]\n"
msgstr ""

#: sys-utils/ipcrm.c:189
#, c-format
msgid "%s: illegal key (%s)\n"
msgstr ""

#: sys-utils/ipcrm.c:204 sys-utils/ipcrm.c:236
msgid "permission denied for key"
msgstr ""

#: sys-utils/ipcrm.c:207 sys-utils/ipcrm.c:246
msgid "already removed key"
msgstr ""

#: sys-utils/ipcrm.c:210 sys-utils/ipcrm.c:241
msgid "invalid key"
msgstr ""

#: sys-utils/ipcrm.c:213 sys-utils/ipcrm.c:251
msgid "unknown error in key"
msgstr ""

#: sys-utils/ipcrm.c:237
msgid "permission denied for id"
msgstr ""

#: sys-utils/ipcrm.c:242
msgid "invalid id"
msgstr ""

#: sys-utils/ipcrm.c:247
msgid "already removed id"
msgstr ""

#: sys-utils/ipcrm.c:252
msgid "unknown error in id"
msgstr ""

#: sys-utils/ipcrm.c:255
#, c-format
msgid "%s: %s (%s)\n"
msgstr ""

#: sys-utils/ipcrm.c:263
#, c-format
msgid "%s: unknown argument: %s\n"
msgstr ""

#: sys-utils/ipcs.c:114
#, c-format
msgid ""
"Usage: %1$s [-asmq] [-t|-c|-l|-u|-p]\n"
"       %1$s [-s|-m|-q] -i id\n"
"       %1$s -h for help\n"
msgstr ""

#: sys-utils/ipcs.c:123
#, c-format
msgid ""
"Usage: %1$s [resource]... [output-format]\n"
"       %1$s [resource] -i id\n"
"\n"
msgstr ""

#: sys-utils/ipcs.c:127
#, c-format
msgid ""
"Provide information on IPC facilities for which you have read access.\n"
"\n"
msgstr ""

#: sys-utils/ipcs.c:131
#, c-format
msgid ""
"    -h      display this help\n"
"    -i id   print details on resource identified by id\n"
"\n"
msgstr ""

#: sys-utils/ipcs.c:134
#, c-format
msgid ""
"Resource options:\n"
"    -m      shared memory segments\n"
"    -q      message queues\n"
"    -s      semaphores\n"
"    -a      all (default)\n"
"\n"
msgstr ""

#: sys-utils/ipcs.c:140
#, c-format
msgid ""
"Output format:\n"
"    -t      time\n"
"    -p      pid\n"
"    -c      creator\n"
"    -l      limits\n"
"    -u      summary\n"
msgstr ""

#: sys-utils/ipcs.c:269
#, c-format
msgid "kernel not configured for shared memory\n"
msgstr ""

#: sys-utils/ipcs.c:275
#, c-format
msgid "------ Shared Memory Limits --------\n"
msgstr ""

#: sys-utils/ipcs.c:280
#, c-format
msgid "max number of segments = %lu\n"
msgstr ""

#: sys-utils/ipcs.c:282
#, c-format
msgid "max seg size (kbytes) = %lu\n"
msgstr ""

#: sys-utils/ipcs.c:284
#, c-format
msgid "max total shared memory (kbytes) = %llu\n"
msgstr ""

#: sys-utils/ipcs.c:286
#, c-format
msgid "min seg size (bytes) = %lu\n"
msgstr ""

#: sys-utils/ipcs.c:291
#, c-format
msgid "------ Shared Memory Status --------\n"
msgstr ""

#. TRANSLATORS: This output format is mantained for backward compatibility
#. as ipcs is used in scripts. For consistency with the rest, the translated
#. form can follow this model:
#.
#. "segments allocated = %d\n"
#. "pages allocated = %ld\n"
#. "pages resident = %ld\n"
#. "pages swapped = %ld\n"
#. "swap performance = %ld attempts, %ld successes\n"
#.
#: sys-utils/ipcs.c:302
#, c-format
msgid ""
"segments allocated %d\n"
"pages allocated %ld\n"
"pages resident  %ld\n"
"pages swapped   %ld\n"
"Swap performance: %ld attempts\t %ld successes\n"
msgstr ""

#: sys-utils/ipcs.c:315
#, c-format
msgid "------ Shared Memory Segment Creators/Owners --------\n"
msgstr ""

#: sys-utils/ipcs.c:317 sys-utils/ipcs.c:323 sys-utils/ipcs.c:330
#: sys-utils/ipcs.c:336
msgid "shmid"
msgstr ""

#: sys-utils/ipcs.c:317 sys-utils/ipcs.c:336 sys-utils/ipcs.c:437
#: sys-utils/ipcs.c:452 sys-utils/ipcs.c:535 sys-utils/ipcs.c:553
msgid "perms"
msgstr ""

#: sys-utils/ipcs.c:317 sys-utils/ipcs.c:437 sys-utils/ipcs.c:535
msgid "cuid"
msgstr ""

#: sys-utils/ipcs.c:317 sys-utils/ipcs.c:437 sys-utils/ipcs.c:535
msgid "cgid"
msgstr ""

#: sys-utils/ipcs.c:317 sys-utils/ipcs.c:437 sys-utils/ipcs.c:535
msgid "uid"
msgstr ""

#: sys-utils/ipcs.c:317 sys-utils/ipcs.c:437 sys-utils/ipcs.c:535
msgid "gid"
msgstr ""

#: sys-utils/ipcs.c:321
#, c-format
msgid "------ Shared Memory Attach/Detach/Change Times --------\n"
msgstr ""

#: sys-utils/ipcs.c:323 sys-utils/ipcs.c:330 sys-utils/ipcs.c:336
#: sys-utils/ipcs.c:443 sys-utils/ipcs.c:452 sys-utils/ipcs.c:541
#: sys-utils/ipcs.c:547 sys-utils/ipcs.c:553
msgid "owner"
msgstr ""

#: sys-utils/ipcs.c:323
msgid "attached"
msgstr ""

#: sys-utils/ipcs.c:323
msgid "detached"
msgstr ""

#: sys-utils/ipcs.c:324
msgid "changed"
msgstr ""

#: sys-utils/ipcs.c:328
#, c-format
msgid "------ Shared Memory Creator/Last-op PIDs --------\n"
msgstr ""

#: sys-utils/ipcs.c:330
msgid "cpid"
msgstr ""

#: sys-utils/ipcs.c:330
msgid "lpid"
msgstr ""

#: sys-utils/ipcs.c:334
#, c-format
msgid "------ Shared Memory Segments --------\n"
msgstr ""

#: sys-utils/ipcs.c:336 sys-utils/ipcs.c:452 sys-utils/ipcs.c:553
msgid "key"
msgstr ""

#: sys-utils/ipcs.c:336
msgid "bytes"
msgstr ""

#: sys-utils/ipcs.c:337
msgid "nattch"
msgstr ""

#: sys-utils/ipcs.c:337
msgid "status"
msgstr ""

#: sys-utils/ipcs.c:358 sys-utils/ipcs.c:360 sys-utils/ipcs.c:362
#: sys-utils/ipcs.c:473 sys-utils/ipcs.c:475 sys-utils/ipcs.c:574
#: sys-utils/ipcs.c:576 sys-utils/ipcs.c:578 sys-utils/ipcs.c:629
#: sys-utils/ipcs.c:631 sys-utils/ipcs.c:659 sys-utils/ipcs.c:661
#: sys-utils/ipcs.c:663 sys-utils/ipcs.c:686
msgid "Not set"
msgstr ""

#: sys-utils/ipcs.c:390
msgid "dest"
msgstr ""

#: sys-utils/ipcs.c:391
msgid "locked"
msgstr ""

#: sys-utils/ipcs.c:411
#, c-format
msgid "kernel not configured for semaphores\n"
msgstr ""

#: sys-utils/ipcs.c:417
#, c-format
msgid "------ Semaphore Limits --------\n"
msgstr ""

#: sys-utils/ipcs.c:421
#, c-format
msgid "max number of arrays = %d\n"
msgstr ""

#: sys-utils/ipcs.c:422
#, c-format
msgid "max semaphores per array = %d\n"
msgstr ""

#: sys-utils/ipcs.c:423
#, c-format
msgid "max semaphores system wide = %d\n"
msgstr ""

#: sys-utils/ipcs.c:424
#, c-format
msgid "max ops per semop call = %d\n"
msgstr ""

#: sys-utils/ipcs.c:425
#, c-format
msgid "semaphore max value = %d\n"
msgstr ""

#: sys-utils/ipcs.c:429
#, c-format
msgid "------ Semaphore Status --------\n"
msgstr ""

#: sys-utils/ipcs.c:430
#, c-format
msgid "used arrays = %d\n"
msgstr ""

#: sys-utils/ipcs.c:431
#, c-format
msgid "allocated semaphores = %d\n"
msgstr ""

#: sys-utils/ipcs.c:435
#, c-format
msgid "------ Semaphore Arrays Creators/Owners --------\n"
msgstr ""

#: sys-utils/ipcs.c:437 sys-utils/ipcs.c:443 sys-utils/ipcs.c:452
msgid "semid"
msgstr ""

#: sys-utils/ipcs.c:441
#, c-format
msgid "------ Semaphore Operation/Change Times --------\n"
msgstr ""

#: sys-utils/ipcs.c:443
msgid "last-op"
msgstr ""

#: sys-utils/ipcs.c:443
msgid "last-changed"
msgstr ""

#: sys-utils/ipcs.c:450
#, c-format
msgid "------ Semaphore Arrays --------\n"
msgstr ""

#: sys-utils/ipcs.c:452
msgid "nsems"
msgstr ""

#: sys-utils/ipcs.c:511
#, c-format
msgid "kernel not configured for message queues\n"
msgstr ""

#: sys-utils/ipcs.c:519
#, c-format
msgid "------ Messages Limits --------\n"
msgstr ""

#: sys-utils/ipcs.c:520
#, c-format
msgid "max queues system wide = %d\n"
msgstr ""

#: sys-utils/ipcs.c:521
#, c-format
msgid "max size of message (bytes) = %d\n"
msgstr ""

#: sys-utils/ipcs.c:522
#, c-format
msgid "default max size of queue (bytes) = %d\n"
msgstr ""

#: sys-utils/ipcs.c:526
#, c-format
msgid "------ Messages Status --------\n"
msgstr ""

#: sys-utils/ipcs.c:527
#, c-format
msgid "allocated queues = %d\n"
msgstr ""

#: sys-utils/ipcs.c:528
#, c-format
msgid "used headers = %d\n"
msgstr ""

#: sys-utils/ipcs.c:529
#, c-format
msgid "used space = %d bytes\n"
msgstr ""

#: sys-utils/ipcs.c:533
#, c-format
msgid "------ Message Queues Creators/Owners --------\n"
msgstr ""

#: sys-utils/ipcs.c:535 sys-utils/ipcs.c:541 sys-utils/ipcs.c:547
#: sys-utils/ipcs.c:553
msgid "msqid"
msgstr ""

#: sys-utils/ipcs.c:539
#, c-format
msgid "------ Message Queues Send/Recv/Change Times --------\n"
msgstr ""

#: sys-utils/ipcs.c:541
msgid "send"
msgstr ""

#: sys-utils/ipcs.c:541
msgid "recv"
msgstr ""

#: sys-utils/ipcs.c:541
msgid "change"
msgstr ""

#: sys-utils/ipcs.c:545
#, c-format
msgid "------ Message Queues PIDs --------\n"
msgstr ""

#: sys-utils/ipcs.c:547
msgid "lspid"
msgstr ""

#: sys-utils/ipcs.c:547
msgid "lrpid"
msgstr ""

#: sys-utils/ipcs.c:551
#, c-format
msgid "------ Message Queues --------\n"
msgstr ""

#: sys-utils/ipcs.c:554
msgid "used-bytes"
msgstr ""

#: sys-utils/ipcs.c:554
msgid "messages"
msgstr ""

#: sys-utils/ipcs.c:618
#, fuzzy
msgid "shmctl failed"
msgstr "%s 失败.\n"

#: sys-utils/ipcs.c:620
#, c-format
msgid ""
"\n"
"Shared memory Segment shmid=%d\n"
msgstr ""

#: sys-utils/ipcs.c:621
#, c-format
msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\n"
msgstr ""

#: sys-utils/ipcs.c:623
#, c-format
msgid "mode=%#o\taccess_perms=%#o\n"
msgstr ""

#: sys-utils/ipcs.c:625
#, c-format
msgid "bytes=%lu\tlpid=%d\tcpid=%d\tnattch=%ld\n"
msgstr ""

#: sys-utils/ipcs.c:628
#, c-format
msgid "att_time=%-26.24s\n"
msgstr ""

#: sys-utils/ipcs.c:630
#, c-format
msgid "det_time=%-26.24s\n"
msgstr ""

#: sys-utils/ipcs.c:632 sys-utils/ipcs.c:662
#, c-format
msgid "change_time=%-26.24s\n"
msgstr ""

#: sys-utils/ipcs.c:644
#, fuzzy
msgid "msgctl failed"
msgstr "%s 失败.\n"

#: sys-utils/ipcs.c:646
#, c-format
msgid ""
"\n"
"Message Queue msqid=%d\n"
msgstr ""

#: sys-utils/ipcs.c:647
#, c-format
msgid "uid=%u\tgid=%u\tcuid=%u\tcgid=%u\tmode=%#o\n"
msgstr ""

#: sys-utils/ipcs.c:649
#, c-format
msgid "cbytes=%ld\tqbytes=%ld\tqnum=%ld\tlspid=%d\tlrpid=%d\n"
msgstr ""

#: sys-utils/ipcs.c:658
#, c-format
msgid "send_time=%-26.24s\n"
msgstr ""

#: sys-utils/ipcs.c:660
#, c-format
msgid "rcv_time=%-26.24s\n"
msgstr ""

#: sys-utils/ipcs.c:677 sys-utils/ipcs.c:699
#, fuzzy
msgid "semctl failed"
msgstr "查找失败"

#: sys-utils/ipcs.c:679
#, c-format
msgid ""
"\n"
"Semaphore Array semid=%d\n"
msgstr ""

#: sys-utils/ipcs.c:680
#, c-format
msgid "uid=%u\t gid=%u\t cuid=%u\t cgid=%u\n"
msgstr ""

#: sys-utils/ipcs.c:682
#, c-format
msgid "mode=%#o, access_perms=%#o\n"
msgstr ""

#: sys-utils/ipcs.c:684
#, c-format
msgid "nsems = %ld\n"
msgstr ""

#: sys-utils/ipcs.c:685
#, c-format
msgid "otime = %-26.24s\n"
msgstr ""

#: sys-utils/ipcs.c:687
#, c-format
msgid "ctime = %-26.24s\n"
msgstr ""

#: sys-utils/ipcs.c:690
msgid "semnum"
msgstr ""

#: sys-utils/ipcs.c:690
msgid "value"
msgstr ""

#: sys-utils/ipcs.c:690
msgid "ncount"
msgstr ""

#: sys-utils/ipcs.c:690
msgid "zcount"
msgstr ""

#: sys-utils/ipcs.c:690
msgid "pid"
msgstr ""

#: sys-utils/ldattach.c:132
#, c-format
msgid "invalid iflag: %s"
msgstr ""

#: sys-utils/ldattach.c:151
#, c-format
msgid " %s [ -dhV78neo12 ] [ -s <speed> ] [ -i [-]<iflag> ] <ldisc> <device>\n"
msgstr ""

#: sys-utils/ldattach.c:154
msgid ""
"\n"
"Known <ldisc> names:\n"
msgstr ""

#: sys-utils/ldattach.c:157
msgid ""
"\n"
"Known <iflag> names:\n"
msgstr ""

#: sys-utils/ldattach.c:243
#, c-format
msgid "invalid speed: %s"
msgstr ""

#: sys-utils/ldattach.c:249
#, c-format
msgid "ldattach from %s\n"
msgstr ""

#: sys-utils/ldattach.c:254
msgid "invalid option"
msgstr ""

#: sys-utils/ldattach.c:267
#, c-format
msgid "invalid line discipline: %s"
msgstr ""

#: sys-utils/ldattach.c:275
#, c-format
msgid "%s is not a serial line"
msgstr ""

#: sys-utils/ldattach.c:281
#, c-format
msgid "cannot get terminal attributes for %s"
msgstr ""

#: sys-utils/ldattach.c:284
#, c-format
msgid "speed %d unsupported"
msgstr ""

#: sys-utils/ldattach.c:319
#, c-format
msgid "cannot set terminal attributes for %s"
msgstr ""

#: sys-utils/ldattach.c:326
msgid "cannot set line discipline"
msgstr ""

#: sys-utils/ldattach.c:332
msgid "cannot daemonize"
msgstr ""

#: sys-utils/lscpu.c:61
#, fuzzy
msgid "none"
msgstr "完成\n"

#: sys-utils/lscpu.c:62
msgid "para"
msgstr ""

#: sys-utils/lscpu.c:63
msgid "full"
msgstr ""

#: sys-utils/lscpu.c:214
#, fuzzy, c-format
msgid "error: cannot open %s"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/lscpu.c:304 sys-utils/lscpu.c:971
#, fuzzy
msgid "failed to callocate cpu set"
msgstr "不能为 inodes 分配缓冲区"

#: sys-utils/lscpu.c:308
#, fuzzy, c-format
msgid "failed to parse CPU list %s"
msgstr "不能读 inodes"

#: sys-utils/lscpu.c:311
#, fuzzy, c-format
msgid "failed to parse CPU mask %s"
msgstr "不能读 inodes"

#: sys-utils/lscpu.c:417
#, fuzzy
msgid "error: uname failed"
msgstr "查找失败"

#: sys-utils/lscpu.c:859
#, c-format
msgid ""
"# The following is the parsable format, which can be fed to other\n"
"# programs. Each different item in every column has an unique ID\n"
"# starting from zero.\n"
msgstr ""

#: sys-utils/lscpu.c:934
msgid "Architecture:"
msgstr ""

#: sys-utils/lscpu.c:948
msgid "CPU op-mode(s):"
msgstr ""

#: sys-utils/lscpu.c:951 sys-utils/lscpu.c:953
msgid "Byte Order:"
msgstr ""

#: sys-utils/lscpu.c:955
msgid "CPU(s):"
msgstr ""

#: sys-utils/lscpu.c:958
msgid "On-line CPU(s) mask:"
msgstr ""

#: sys-utils/lscpu.c:959
msgid "On-line CPU(s) list:"
msgstr ""

#: sys-utils/lscpu.c:977
msgid "Off-line CPU(s) mask:"
msgstr ""

#: sys-utils/lscpu.c:978
msgid "Off-line CPU(s) list:"
msgstr ""

#: sys-utils/lscpu.c:984
msgid "Thread(s) per core:"
msgstr ""

#: sys-utils/lscpu.c:985
msgid "Core(s) per socket:"
msgstr ""

#: sys-utils/lscpu.c:987
msgid "Socket(s) per book:"
msgstr ""

#: sys-utils/lscpu.c:988
msgid "Book(s):"
msgstr ""

#: sys-utils/lscpu.c:990
msgid "Socket(s):"
msgstr ""

#: sys-utils/lscpu.c:994
msgid "NUMA node(s):"
msgstr ""

#: sys-utils/lscpu.c:996
msgid "Vendor ID:"
msgstr ""

#: sys-utils/lscpu.c:998
msgid "CPU family:"
msgstr ""

#: sys-utils/lscpu.c:1000
msgid "Model:"
msgstr ""

#: sys-utils/lscpu.c:1002
msgid "Stepping:"
msgstr ""

#: sys-utils/lscpu.c:1004
msgid "CPU MHz:"
msgstr ""

#: sys-utils/lscpu.c:1006
msgid "BogoMIPS:"
msgstr ""

#: sys-utils/lscpu.c:1009 sys-utils/lscpu.c:1011
msgid "Virtualization:"
msgstr ""

#: sys-utils/lscpu.c:1014
msgid "Hypervisor vendor:"
msgstr ""

#: sys-utils/lscpu.c:1015
msgid "Virtualization type:"
msgstr ""

#: sys-utils/lscpu.c:1023
#, c-format
msgid "%s cache:"
msgstr ""

#: sys-utils/lscpu.c:1029
#, c-format
msgid "NUMA node%d CPU(s):"
msgstr ""

#: sys-utils/lscpu.c:1041
msgid ""
" -h, --help          print this help\n"
" -p, --parse <list>  print out a parsable instead of a readable format\n"
" -s, --sysroot <dir> use directory DIR as system root\n"
" -x, --hex           print hexadecimal masks rather than lists of CPUs\n"
"\n"
msgstr ""

#: sys-utils/mountpoint.c:81
#, c-format
msgid ""
" %1$s [-qd] /path/to/directory\n"
" %1$s -x /dev/device\n"
msgstr ""

#: sys-utils/mountpoint.c:85
msgid ""
" -q, --quiet        quiet mode - don't print anything\n"
" -d, --fs-devno     print maj:min device number of the filesystem\n"
" -x, --devno        print maj:min device number of the block device\n"
" -h, --help         this help\n"
msgstr ""

#: sys-utils/mountpoint.c:90
#, c-format
msgid ""
"\n"
"For more information see mountpoint(1).\n"
msgstr ""

#: sys-utils/mountpoint.c:159
#, fuzzy, c-format
msgid "%s is not a mountpoint\n"
msgstr "根 inode 不是一个目录"

#: sys-utils/mountpoint.c:165
#, fuzzy, c-format
msgid "%s is a mountpoint\n"
msgstr "%s 已经挂载.\t"

#: sys-utils/readprofile.c:104
#, c-format
msgid ""
"%s: Usage: \"%s [options]\n"
"\t -m <mapfile>  (defaults: \"%s\" and\n"
"\t\t\t\t  \"%s\")\n"
"\t -p <pro-file> (default: \"%s\")\n"
"\t -M <mult>     set the profiling multiplier to <mult>\n"
"\t -i            print only info about the sampling step\n"
"\t -v            print verbose data\n"
"\t -a            print all symbols, even if count is 0\n"
"\t -b            print individual histogram-bin counts\n"
"\t -s            print individual counters within functions\n"
"\t -r            reset all the counters (root only)\n"
"\t -n            disable byte order auto-detection\n"
"\t -V            print version and exit\n"
msgstr ""

#: sys-utils/readprofile.c:214
#, c-format
msgid "readprofile: error writing %s: %s\n"
msgstr ""

#: sys-utils/readprofile.c:254
#, c-format
msgid "Assuming reversed byte order. Use -n to force native byte order.\n"
msgstr ""

#: sys-utils/readprofile.c:270
#, c-format
msgid "Sampling_step: %i\n"
msgstr ""

#: sys-utils/readprofile.c:291 sys-utils/readprofile.c:317
#, c-format
msgid "%s: %s(%i): wrong map line\n"
msgstr ""

#: sys-utils/readprofile.c:304
#, c-format
msgid "%s: can't find \"_stext\" in %s\n"
msgstr ""

#: sys-utils/readprofile.c:340
#, c-format
msgid "%s: profile address out of range. Wrong map file?\n"
msgstr ""

#: sys-utils/readprofile.c:400
msgid "total"
msgstr ""

#: sys-utils/renice.c:56
#, c-format
msgid ""
" %1$s [-n] <priority> [-p] <pid> [<pid>  ...]\n"
" %1$s [-n] <priority>  -g <pgrp> [<pgrp> ...]\n"
" %1$s [-n] <priority>  -u <user> [<user> ...]\n"
msgstr ""

#: sys-utils/renice.c:62
msgid ""
" -g, --pgrp <id>        interpret as process group ID\n"
" -h, --help             print help\n"
" -n, --priority <num>   set the nice increment value\n"
" -p, --pid <id>         force to be interpreted as process ID\n"
" -u, --user <name|id>   interpret as username or user ID\n"
" -v, --version          print version\n"
msgstr ""

#: sys-utils/renice.c:69
msgid ""
"\n"
"For more information see renice(1).\n"
msgstr ""

#: sys-utils/renice.c:100
#, c-format
msgid "renice from %s\n"
msgstr ""

#: sys-utils/renice.c:137
#, fuzzy, c-format
msgid "unknown user %s"
msgstr "%s: 未知命令: %s\n"

#: sys-utils/renice.c:144
#, c-format
msgid "bad value %s"
msgstr ""

#: sys-utils/renice.c:156
msgid "process ID"
msgstr ""

#: sys-utils/renice.c:159
msgid "user ID"
msgstr ""

#: sys-utils/renice.c:161
msgid "process group ID"
msgstr ""

#: sys-utils/renice.c:166 sys-utils/renice.c:176
#, fuzzy, c-format
msgid "failed to get priority for %d (%s)"
msgstr "不能读 inodes"

#: sys-utils/renice.c:170
#, fuzzy, c-format
msgid "failed to set priority for %d (%s)"
msgstr "不能读 inodes"

#: sys-utils/renice.c:180
#, c-format
msgid "%d (%s) old priority %d, new priority %d\n"
msgstr ""

#: sys-utils/rtcwake.c:91
msgid ""
" -d, --device <device>    select rtc device (rtc0|rtc1|...)\n"
" -n, --dry-run            does everything, but suspend\n"
" -l, --local              RTC uses local timezone\n"
" -m, --mode <mode>        standby|mem|... sleep mode\n"
" -s, --seconds <seconds>  seconds to sleep\n"
" -t, --time <time_t>      time to wake\n"
" -u, --utc                RTC uses UTC\n"
" -v, --verbose            verbose messages\n"
" -V, --version            show version\n"
msgstr ""

#: sys-utils/rtcwake.c:101
msgid ""
"\n"
"For more information see rtcwake(8).\n"
msgstr ""

#: sys-utils/rtcwake.c:152
#, fuzzy
msgid "read rtc time failed"
msgstr "查找失败"

#: sys-utils/rtcwake.c:157
#, fuzzy
msgid "read system time failed"
msgstr "查找失败"

#: sys-utils/rtcwake.c:175
#, fuzzy
msgid "convert rtc time failed"
msgstr "查找失败"

#: sys-utils/rtcwake.c:235
#, fuzzy
msgid "set rtc alarm failed"
msgstr "查找失败"

#: sys-utils/rtcwake.c:239
msgid "enable rtc alarm failed"
msgstr ""

#: sys-utils/rtcwake.c:243
msgid "set rtc wake alarm failed"
msgstr ""

#: sys-utils/rtcwake.c:345
#, fuzzy
msgid "read rtc alarm failed"
msgstr "查找失败"

#: sys-utils/rtcwake.c:351
#, c-format
msgid "alarm: off\n"
msgstr ""

#: sys-utils/rtcwake.c:368
#, fuzzy
msgid "convert time failed"
msgstr "查找失败"

#: sys-utils/rtcwake.c:375
#, c-format
msgid "alarm: on  %s"
msgstr ""

#: sys-utils/rtcwake.c:431
#, c-format
msgid "unrecognized suspend state '%s'"
msgstr ""

#: sys-utils/rtcwake.c:442
#, fuzzy
msgid "failed to parse seconds value"
msgstr "不能读 inodes"

#: sys-utils/rtcwake.c:450
#, fuzzy
msgid "failed to parse time_t value"
msgstr "不能读 inodes"

#: sys-utils/rtcwake.c:474
#, c-format
msgid "%s: assuming RTC uses UTC ...\n"
msgstr ""

#: sys-utils/rtcwake.c:480
#, c-format
msgid "Using UTC time.\n"
msgstr ""

#: sys-utils/rtcwake.c:481
#, c-format
msgid "Using local time.\n"
msgstr ""

#: sys-utils/rtcwake.c:486
msgid "must provide wake time (see -t and -s options)"
msgstr ""

#: sys-utils/rtcwake.c:504
#, fuzzy, c-format
msgid "%s not enabled for wakeup events"
msgstr "%s: 不能打开 %s\n"

#: sys-utils/rtcwake.c:519
#, c-format
msgid "alarm %ld, sys_time %ld, rtc_time %ld, seconds %u\n"
msgstr ""

#: sys-utils/rtcwake.c:525
#, c-format
msgid "suspend to \"%s\" unavailable"
msgstr ""

#: sys-utils/rtcwake.c:533
#, c-format
msgid "time doesn't go backward to %s"
msgstr ""

#: sys-utils/rtcwake.c:543
#, c-format
msgid "%s: wakeup using %s at %s"
msgstr ""

#: sys-utils/rtcwake.c:547
#, c-format
msgid "%s: wakeup from \"%s\" using %s at %s"
msgstr ""

#: sys-utils/rtcwake.c:556
#, c-format
msgid "suspend mode: no; leaving\n"
msgstr ""

#: sys-utils/rtcwake.c:564
#, c-format
msgid "suspend mode: off; executing %s\n"
msgstr ""

#: sys-utils/rtcwake.c:574
#, fuzzy, c-format
msgid "unable to execute %s"
msgstr "不能读 inodes"

#: sys-utils/rtcwake.c:582
#, c-format
msgid "suspend mode: on; reading rtc\n"
msgstr ""

#: sys-utils/rtcwake.c:588
#, fuzzy
msgid "rtc read failed"
msgstr "查找失败"

#: sys-utils/rtcwake.c:599
#, c-format
msgid "suspend mode: disable; disabling alarm\n"
msgstr ""

#: sys-utils/rtcwake.c:603
#, c-format
msgid "suspend mode: show; printing alarm info\n"
msgstr ""

#: sys-utils/rtcwake.c:610
#, c-format
msgid "suspend mode: %s; suspending system\n"
msgstr ""

#: sys-utils/rtcwake.c:616
msgid "disable rtc alarm interrupt failed"
msgstr ""

#: sys-utils/setarch.c:51
#, c-format
msgid "Switching on %s.\n"
msgstr ""

#: sys-utils/setarch.c:118
#, c-format
msgid ""
"Usage: %s%s [options] [program [program arguments]]\n"
"\n"
"Options:\n"
msgstr ""

#: sys-utils/setarch.c:122
#, c-format
msgid ""
" -h, --help               displays this help text\n"
" -v, --verbose            says what options are being switched on\n"
" -R, --addr-no-randomize  disables randomization of the virtual address "
"space\n"
" -F, --fdpic-funcptrs     makes function pointers point to descriptors\n"
" -Z, --mmap-page-zero     turns on MMAP_PAGE_ZERO\n"
" -L, --addr-compat-layout changes the way virtual memory is allocated\n"
" -X, --read-implies-exec  turns on READ_IMPLIES_EXEC\n"
" -B, --32bit              turns on ADDR_LIMIT_32BIT\n"
" -I, --short-inode        turns on SHORT_INODE\n"
" -S, --whole-seconds      turns on WHOLE_SECONDS\n"
" -T, --sticky-timeouts    turns on STICKY_TIMEOUTS\n"
" -3, --3gb                limits the used address space to a maximum of 3 "
"GB\n"
"     --4gb                ignored (for backward compatibility only)\n"
msgstr ""

#: sys-utils/setarch.c:137
#, c-format
msgid "     --uname-2.6          turns on UNAME26\n"
msgstr ""

#: sys-utils/setarch.c:139
#, c-format
msgid ""
"\n"
"For more information see setarch(8).\n"
msgstr ""

#: sys-utils/setarch.c:151
#, c-format
msgid ""
"%s: %s\n"
"Try `%s --help' for more information.\n"
msgstr ""

#: sys-utils/setarch.c:223 sys-utils/setarch.c:238
#, c-format
msgid "%s: Unrecognized architecture"
msgstr ""

#: sys-utils/setarch.c:256 sys-utils/setarch.c:263
msgid "Not enough arguments"
msgstr ""

#: sys-utils/setarch.c:272 sys-utils/setarch.c:328
#, c-format
msgid "Failed to set personality to %s"
msgstr ""

#: sys-utils/setsid.c:26
#, c-format
msgid "usage: %s program [arg ...]\n"
msgstr ""

#: sys-utils/tunelp.c:77
#, c-format
msgid ""
"Usage: %s <device> [ -i <IRQ> | -t <TIME> | -c <CHARS> | -w <WAIT> | \n"
"          -a [on|off] | -o [on|off] | -C [on|off] | -q [on|off] | -s | \n"
"          -T [on|off] ]\n"
msgstr ""

#: sys-utils/tunelp.c:95
#, c-format
msgid "%s: bad value\n"
msgstr ""

#: sys-utils/tunelp.c:234
#, c-format
msgid "%s: %s not an lp device.\n"
msgstr ""

#: sys-utils/tunelp.c:251
msgid "LPGETSTATUS error"
msgstr ""

#: sys-utils/tunelp.c:255
#, c-format
msgid "%s status is %d"
msgstr ""

#: sys-utils/tunelp.c:256
#, c-format
msgid ", busy"
msgstr ""

#: sys-utils/tunelp.c:257
#, c-format
msgid ", ready"
msgstr ""

#: sys-utils/tunelp.c:258
#, c-format
msgid ", out of paper"
msgstr ""

#: sys-utils/tunelp.c:259
#, c-format
msgid ", on-line"
msgstr ""

#: sys-utils/tunelp.c:260
#, c-format
msgid ", error"
msgstr ""

#: sys-utils/tunelp.c:266
#, fuzzy
msgid "tunelp: ioctl failed"
msgstr "查找失败"

#: sys-utils/tunelp.c:277
msgid "LPGETIRQ error"
msgstr ""

#: sys-utils/tunelp.c:283
#, c-format
msgid "%s using IRQ %d\n"
msgstr ""

#: sys-utils/tunelp.c:285
#, c-format
msgid "%s using polling\n"
msgstr ""

#: sys-utils/unshare.c:59
#, fuzzy, c-format
msgid " %s [options] <program> [args...]\n"
msgstr "用法: %s [ -n ] device\n"

#: sys-utils/unshare.c:62
msgid ""
" -h, --help        usage information (this)\n"
" -m, --mount       unshare mounts namespace\n"
" -u, --uts         unshare UTS namespace (hostname etc)\n"
" -i, --ipc         unshare System V IPC namespace\n"
" -n, --net         unshare network namespace\n"
msgstr ""

#: sys-utils/unshare.c:68
msgid ""
"\n"
"For more information see unshare(1).\n"
msgstr ""

#: sys-utils/unshare.c:116
#, fuzzy
msgid "unshare failed"
msgstr "查找失败"

#: sys-utils/unshare.c:120
msgid "cannot set group id"
msgstr ""

#: sys-utils/unshare.c:123
#, fuzzy
msgid "cannot set user id"
msgstr "%s: 不能打开 %s\n"

#: term-utils/agetty.c:434
#, fuzzy, c-format
msgid "%s: can't change root directory %s: %m"
msgstr "查找失败"

#: term-utils/agetty.c:439
#, fuzzy, c-format
msgid "%s: can't change working directory %s: %m"
msgstr "查找失败"

#: term-utils/agetty.c:444
#, c-format
msgid "%s: can't change process priority: %m"
msgstr ""

#: term-utils/agetty.c:450
#, c-format
msgid "%s: can't exec %s: %m"
msgstr ""

#: term-utils/agetty.c:479 term-utils/agetty.c:729 term-utils/agetty.c:741
#: term-utils/agetty.c:1502 term-utils/agetty.c:1858
#, fuzzy, c-format
msgid "failed to allocate memory: %m"
msgstr "不能为 inodes 分配缓冲区"

#: term-utils/agetty.c:649
#, c-format
msgid "bad timeout value: %s"
msgstr ""

#: term-utils/agetty.c:677 term-utils/agetty.c:686
#, fuzzy
msgid "not enough arguments"
msgstr "%s 需要一个参数\n"

#: term-utils/agetty.c:759
#, c-format
msgid "bad speed: %s"
msgstr ""

#: term-utils/agetty.c:761
msgid "too many alternate speeds"
msgstr ""

#: term-utils/agetty.c:882 term-utils/agetty.c:899 term-utils/agetty.c:933
#, c-format
msgid "/dev/%s: cannot open as standard input: %m"
msgstr ""

#: term-utils/agetty.c:903 term-utils/agetty.c:907
#, c-format
msgid "/dev/%s: not a character device"
msgstr ""

#: term-utils/agetty.c:947
#, c-format
msgid "%s: not open for read/write"
msgstr ""

#: term-utils/agetty.c:964
#, c-format
msgid "%s: dup problem: %m"
msgstr ""

#: term-utils/agetty.c:1313
msgid "Num Lock off"
msgstr ""

#: term-utils/agetty.c:1316
msgid "Num Lock on"
msgstr ""

#: term-utils/agetty.c:1319
msgid "Caps Lock on"
msgstr ""

#: term-utils/agetty.c:1322
msgid "Scroll Lock on"
msgstr ""

#: term-utils/agetty.c:1325
#, c-format
msgid ""
"Hint: %s\n"
"\n"
msgstr ""

#: term-utils/agetty.c:1428
#, c-format
msgid "%s: read: %m"
msgstr ""

#: term-utils/agetty.c:1482
#, c-format
msgid "%s: input overrun"
msgstr ""

#: term-utils/agetty.c:1632
#, c-format
msgid ""
"\n"
"Usage:\n"
" %1$s [options] line baud_rate,... [termtype]\n"
" %1$s [options] baud_rate,... line [termtype]\n"
msgstr ""

#: term-utils/agetty.c:1637
#, c-format
msgid ""
"\n"
"Options:\n"
" -8, --8bits                assume 8-bit tty\n"
" -a, --autologin <user>     login the specified user automatically\n"
" -c, --noreset              do not reset control mode\n"
" -f, --issue-file <file>    display issue file\n"
" -h, --flow-control         enable hardware flow control\n"
" -H, --host <hostname>      specify login host\n"
" -i, --noissue              do not display issue file\n"
" -I, --init-string <string> set init string\n"
" -l, --login-program <file> specify login program\n"
" -L, --local-line           force local line\n"
" -m, --extract-baud         extract baud rate during connect\n"
" -n, --skip-login           do not prompt for login\n"
" -o, --login-options <opts> options that are passed to login\n"
" -p, --loginpause           wait for any key before the login\n"
" -R, --hangup               do virtually hangup on the tty\n"
" -s, --keep-baud            try to keep baud rate after break\n"
" -t, --timeout <number>     login process timeout\n"
" -U, --detect-case          detect uppercase terminal\n"
" -w, --wait-cr              wait carriage-return\n"
"     --noclear              do not clear the screen before prompt\n"
"     --nonewline            do not print a newline before issue\n"
"     --no-hostname          no hostname at all will be shown\n"
"     --long-hostname        show full qualified hostname\n"
"     --version              output version information and exit\n"
"     --help                 display this help and exit\n"
"\n"
msgstr ""

#: term-utils/agetty.c:1842
#, c-format
msgid "user"
msgstr ""

#: term-utils/agetty.c:1842
#, c-format
msgid "users"
msgstr ""

#: term-utils/mesg.c:70
#, fuzzy, c-format
msgid " %s [options] [y | n]\n"
msgstr "用法: %s [ -n ] device\n"

#: term-utils/mesg.c:73
msgid ""
" -v, --verbose      explain what is being done\n"
" -V, --version      output version information and exit\n"
" -h, --help         output help screen and exit\n"
"\n"
msgstr ""

#: term-utils/mesg.c:116
#, fuzzy
msgid "ttyname failed"
msgstr "查找失败"

#: term-utils/mesg.c:119
#, fuzzy, c-format
msgid "stat %s failed"
msgstr "%s 失败.\n"

#: term-utils/mesg.c:123
msgid "is y"
msgstr ""

#: term-utils/mesg.c:126
msgid "is n"
msgstr ""

#: term-utils/mesg.c:137 term-utils/mesg.c:143
#, fuzzy, c-format
msgid "change %s mode failed"
msgstr "%s 失败.\n"

#: term-utils/mesg.c:139
msgid "write access to your terminal is allowed"
msgstr ""

#: term-utils/mesg.c:145
msgid "write access to your terminal is denied"
msgstr ""

#: term-utils/mesg.c:148
#, c-format
msgid "invalid argument: %c"
msgstr ""

#: term-utils/script.c:122
#, c-format
msgid ""
"output file `%s' is a link\n"
"Use --force if you really want to use it.\n"
"Program not started."
msgstr ""

#: term-utils/script.c:132
#, fuzzy, c-format
msgid " %s [options] [file]\n"
msgstr "用法: %s [ -n ] device\n"

#: term-utils/script.c:135
msgid ""
" -a, --append            append the output\n"
" -c, --command <command> run command rather than interactive shell\n"
" -r, --return            return exit code of the child process\n"
" -f, --flush             run flush after each write\n"
"     --force             use output file even when it is a link\n"
" -q, --quiet             be quiet\n"
" -t, --timing[=<file>]   output timing data to stderr (or to FILE)\n"
" -V, --version           output version information and exit\n"
" -h, --help              display this help and exit\n"
"\n"
msgstr ""

#: term-utils/script.c:208 term-utils/scriptreplay.c:195
#, c-format
msgid "cannot open timing file %s"
msgstr ""

#: term-utils/script.c:243
#, c-format
msgid "Script started, file is %s\n"
msgstr ""

#: term-utils/script.c:363
#, c-format
msgid "Script started on %s"
msgstr ""

#: term-utils/script.c:399
#, fuzzy
msgid "cannot write script file"
msgstr "%s: 不能打开 %s\n"

#: term-utils/script.c:476
#, c-format
msgid ""
"\n"
"Script done on %s"
msgstr ""

#: term-utils/script.c:485
#, c-format
msgid "Script done, file is %s\n"
msgstr ""

#: term-utils/script.c:507
#, fuzzy
msgid "openpty failed"
msgstr "查找失败"

#: term-utils/script.c:543
msgid "out of pty's"
msgstr ""

#: term-utils/scriptreplay.c:41
#, c-format
msgid " %s [-t] timingfile [typescript] [divisor]\n"
msgstr ""

#: term-utils/scriptreplay.c:45
msgid ""
" -t, --timing <file>     script timing output file\n"
" -s, --typescript <file> script terminal session output file\n"
" -d, --divisor <num>     speed up or slow down execution with time divisor\n"
" -V, --version           output version information and exit\n"
" -h, --help              display this help and exit\n"
"\n"
msgstr ""

#: term-utils/scriptreplay.c:64
#, c-format
msgid "expected a number, but got '%s'"
msgstr ""

#: term-utils/scriptreplay.c:67 term-utils/scriptreplay.c:71
#, c-format
msgid "divisor '%s'"
msgstr ""

#: term-utils/scriptreplay.c:115
msgid "write to stdout failed"
msgstr ""

#: term-utils/scriptreplay.c:121
#, c-format
msgid "unexpected end of file on %s"
msgstr ""

#: term-utils/scriptreplay.c:123
#, c-format
msgid "failed to read typescript file %s"
msgstr ""

#: term-utils/scriptreplay.c:183
msgid "wrong number of arguments"
msgstr ""

#: term-utils/scriptreplay.c:198
#, c-format
msgid "cannot open typescript file %s"
msgstr ""

#: term-utils/scriptreplay.c:214
#, c-format
msgid "failed to read timing file %s"
msgstr ""

#: term-utils/scriptreplay.c:216
#, c-format
msgid "timings file %s: %lu: unexpected format"
msgstr ""

#: term-utils/setterm.c:673
#, fuzzy
msgid "Argument error."
msgstr "内部错误"

#: term-utils/setterm.c:680
msgid ""
" -term <terminal_name>\n"
" -reset\n"
" -initialize\n"
" -cursor <on|off>\n"
" -repeat <on|off>\n"
" -appcursorkeys <on|off>\n"
" -linewrap <on|off>\n"
" -default\n"
" -foreground <black|blue|green|cyan|red|magenta|yellow|white|default>\n"
" -background <black|blue|green|cyan|red|magenta|yellow|white|default>\n"
" -ulcolor <black|grey|blue|green|cyan|red|magenta|yellow|white>\n"
" -ulcolor <bright blue|green|cyan|red|magenta|yellow|white>\n"
" -hbcolor <black|grey|blue|green|cyan|red|magenta|yellow|white>\n"
" -hbcolor <bright blue|green|cyan|red|magenta|yellow|white>\n"
" -inversescreen <on|off>\n"
" -bold <on|off>\n"
" -half-bright <on|off>\n"
" -blink <on|off>\n"
" -reverse <on|off>\n"
" -underline <on|off>\n"
" -store >\n"
" -clear <all|rest>\n"
" -tabs < tab1 tab2 tab3 ... >      (tabn = 1-160)\n"
" -clrtabs < tab1 tab2 tab3 ... >   (tabn = 1-160)\n"
" -regtabs <1-160>\n"
" -blank <0-60|force|poke>\n"
" -dump   <1-NR_CONSOLES>\n"
" -append <1-NR_CONSOLES>\n"
" -file dumpfilename\n"
" -msg <on|off>\n"
" -msglevel <0-8>\n"
" -powersave <on|vsync|hsync|powerdown|off>\n"
" -powerdown <0-60>\n"
" -blength <0-2000>\n"
" -bfreq freqnumber\n"
" -version\n"
" -help\n"
msgstr ""

#: term-utils/setterm.c:718
#, c-format
msgid ""
"\n"
"For more information see lsblk(1).\n"
msgstr ""

#: term-utils/setterm.c:1071
msgid "cannot force blank"
msgstr ""

#: term-utils/setterm.c:1075
msgid "cannot force unblank"
msgstr ""

#: term-utils/setterm.c:1081
msgid "cannot get blank status"
msgstr ""

#: term-utils/setterm.c:1093
#, fuzzy
msgid "cannot (un)set powersave mode"
msgstr "%s: 不能打开 %s\n"

#: term-utils/setterm.c:1113
#, fuzzy, c-format
msgid "can not open dump file %s for output"
msgstr "%s: 不能打开 %s\n"

#: term-utils/setterm.c:1129 term-utils/setterm.c:1137
#, fuzzy
msgid "klogctl error"
msgstr "内部错误"

#: term-utils/setterm.c:1203
msgid "Error writing screendump"
msgstr ""

#: term-utils/setterm.c:1210
#, fuzzy, c-format
msgid "Couldn't read %s"
msgstr "%s 失败.\n"

#: term-utils/setterm.c:1263
msgid "$TERM is not defined."
msgstr ""

#: term-utils/setterm.c:1271
msgid "terminfo database cannot be found"
msgstr ""

#: term-utils/setterm.c:1273
#, c-format
msgid "%s: unknown terminal type"
msgstr ""

#: term-utils/setterm.c:1275
msgid "terminal is hardcopy"
msgstr ""

#: term-utils/ttymsg.c:76
msgid "too many iov's (change code in wall/ttymsg.c)"
msgstr ""

#: term-utils/ttymsg.c:86
#, c-format
msgid "excessively long line arg"
msgstr ""

#: term-utils/ttymsg.c:141
#, c-format
msgid "cannot fork"
msgstr ""

#: term-utils/ttymsg.c:145
#, c-format
msgid "fork: %s"
msgstr ""

#: term-utils/ttymsg.c:175
#, c-format
msgid "%s: BAD ERROR, message is far too long"
msgstr ""

#: term-utils/wall.c:89
#, fuzzy, c-format
msgid " %s [options] [<file>]\n"
msgstr "用法: %s [ -n ] device\n"

#: term-utils/wall.c:92
msgid ""
" -n, --nobanner          do not print banner, works only for root\n"
" -t, --timeout <timeout> write timeout in seconds\n"
" -V, --version           output version information and exit\n"
" -h, --help              display this help and exit\n"
"\n"
msgstr ""

#: term-utils/wall.c:131
msgid "--nobanner is available only for root"
msgstr ""

#: term-utils/wall.c:134
msgid "invalid timeout argument"
msgstr ""

#: term-utils/wall.c:136
#, c-format
msgid "invalid timeout argument: %s"
msgstr ""

#: term-utils/wall.c:208
#, fuzzy, c-format
msgid "can't open temporary file %s"
msgstr "%s: 不能打开 %s\n"

#: term-utils/wall.c:217
#, fuzzy
msgid "cannot get passwd uid"
msgstr "%s: 不能打开 %s\n"

#: term-utils/wall.c:222
msgid "cannot get tty name"
msgstr ""

#: term-utils/wall.c:238
#, c-format
msgid "Broadcast Message from %s@%s"
msgstr ""

#: term-utils/wall.c:258
#, c-format
msgid "will not read %s - use stdin."
msgstr ""

#: term-utils/wall.c:284
#, fuzzy
msgid "fstat failed"
msgstr "%s 失败.\n"

#: term-utils/wall.c:290
#, fuzzy
msgid "fread failed"
msgstr "查找失败"

#: term-utils/write.c:80
#, fuzzy, c-format
msgid " %s [options] <user> [<ttyname>]\n"
msgstr "用法: %s [ -n ] device\n"

#: term-utils/write.c:84
msgid ""
" -V, --version    output version information and exit\n"
" -h, --help       display this help and exit\n"
"\n"
msgstr ""

#: term-utils/write.c:135
msgid "can't find your tty's name"
msgstr ""

#: term-utils/write.c:148
msgid "you have write permission turned off"
msgstr ""

#: term-utils/write.c:166
#, fuzzy, c-format
msgid "%s is not logged in on %s"
msgstr "%s 已经挂载.\t"

#: term-utils/write.c:172
#, c-format
msgid "%s has messages disabled on %s"
msgstr ""

#: term-utils/write.c:267
#, fuzzy, c-format
msgid "%s is not logged in"
msgstr "%s 已经挂载.\t"

#: term-utils/write.c:274
#, c-format
msgid "%s has messages disabled"
msgstr ""

#: term-utils/write.c:276
#, c-format
msgid "%s is logged in more than once; writing to %s"
msgstr ""

#: term-utils/write.c:324
#, c-format
msgid "tty path %s too long"
msgstr ""

#: term-utils/write.c:340
#, c-format
msgid "Message from %s@%s (as %s) on %s at %s ..."
msgstr ""

#: term-utils/write.c:343
#, c-format
msgid "Message from %s@%s on %s at %s ..."
msgstr ""

#: term-utils/write.c:370
#, fuzzy
msgid "carefulputc failed"
msgstr "查找失败"

#: text-utils/col.c:120
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options]\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/col.c:124
#, c-format
msgid ""
"\n"
"Options:\n"
" -b, --no-backspaces    do not output backspaces\n"
" -f, --fine             permit forward half line feeds\n"
" -p, --pass             pass unknown control sequences\n"
" -h, --tabs             convert spaces to tabs\n"
" -x, --spaces           convert tabs to spaces\n"
" -l, --lines NUM        buffer at least NUM lines\n"
" -V, --version          output version information and exit\n"
" -H, --help             display this help and exit\n"
"\n"
msgstr ""

#: text-utils/col.c:135 text-utils/colrm.c:65
#, c-format
msgid ""
"%s reads from standard input and writes to standard output\n"
"\n"
msgstr ""

#: text-utils/col.c:143
#, fuzzy
msgid "write error."
msgstr "内部错误"

#: text-utils/col.c:198
msgid "bad -l argument"
msgstr ""

#: text-utils/col.c:200
#, c-format
msgid "argument %lu is too large"
msgstr ""

#: text-utils/col.c:326
#, c-format
msgid "warning: can't back up %s."
msgstr ""

#: text-utils/col.c:327
msgid "past first line"
msgstr ""

#: text-utils/col.c:327
msgid "-- line already flushed"
msgstr ""

#: text-utils/colcrt.c:314
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options] [file ...]\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/colcrt.c:318
#, c-format
msgid ""
" -,  --no-underlining  suppress all underlining\n"
" -2, --half-lines      print all half-lines\n"
" -V, --version         output version information and exit\n"
" -h, --help            display this help and exit\n"
"\n"
msgstr ""

#: text-utils/colrm.c:57
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [startcol [endcol]]\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/colrm.c:61
#, c-format
msgid ""
"\n"
"Options:\n"
" -V, --version   output version information and exit\n"
" -h, --help      display this help and exit\n"
"\n"
msgstr ""

#: text-utils/colrm.c:182
#, fuzzy
msgid "first argument"
msgstr "%s 需要一个参数\n"

#: text-utils/colrm.c:184
#, fuzzy
msgid "second argument"
msgstr "%s 需要一个参数\n"

#: text-utils/column.c:89
#, fuzzy, c-format
msgid ""
"\n"
"Usage: %s [options] [file ...]\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/column.c:94
#, c-format
msgid ""
" -h, --help               displays this help text\n"
" -V, --version            output version information and exit\n"
" -c, --columns <width>    width of output in number of characters\n"
" -t, --table              create a table\n"
" -s, --separator <string> table delimeter\n"
" -x, --fillrows           fill rows before columns\n"
msgstr ""

#: text-utils/column.c:101
#, c-format
msgid ""
"\n"
"For more information see column(1).\n"
msgstr ""

#: text-utils/column.c:139
msgid "terminal environment COLUMNS failed"
msgstr ""

#: text-utils/column.c:154
msgid "bad columns width value"
msgstr ""

#: text-utils/column.c:157
#, c-format
msgid "-%c positive integer expected as an argument"
msgstr ""

#: text-utils/column.c:361
#, c-format
msgid "line %d is too long, output will be truncated"
msgstr ""

#: text-utils/hexdump.c:64
msgid ""
"calling hexdump as od has been deprecated in favour to GNU coreutils od."
msgstr ""

#: text-utils/hexsyntax.c:85
msgid "bad length value"
msgstr ""

#: text-utils/hexsyntax.c:93
msgid "bad skip value"
msgstr ""

#: text-utils/hexsyntax.c:134
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options] file...\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/hexsyntax.c:138
#, c-format
msgid ""
"\n"
"Options:\n"
" -b              one-byte octal display\n"
" -c              one-byte character display\n"
" -C              canonical hex+ASCII display\n"
" -d              two-byte decimal display\n"
" -o              two-byte octal display\n"
" -x              two-byte hexadecimal display\n"
" -e format       format string to be used for displaying data\n"
" -f format_file  file that contains format strings\n"
" -n length       interpret only length bytes of input\n"
" -s offset       skip offset bytes from the beginning\n"
" -v              display without squeezing similar lines\n"
" -V              output version information and exit\n"
"\n"
msgstr ""

#: text-utils/more.c:299
#, fuzzy, c-format
msgid ""
"Usage: %s [options] file...\n"
"\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/more.c:302
#, c-format
msgid ""
"Options:\n"
"  -d        display help instead of ring bell\n"
"  -f        count logical, rather than screen lines\n"
"  -l        suppress pause after form feed\n"
"  -p        suppress scroll, clean screen and disblay text\n"
"  -c        suppress scroll, display text and clean line ends\n"
"  -u        suppress underlining\n"
"  -s        squeeze multiple blank lines into one\n"
"  -NUM      specify the number of lines per screenful\n"
"  +NUM      display file beginning from line number NUM\n"
"  +/STRING  display file beginning from search string match\n"
"  -V        output version information and exit\n"
msgstr ""

#: text-utils/more.c:537
#, fuzzy, c-format
msgid "more (%s)\n"
msgstr "%s (%s)\n"

#: text-utils/more.c:541
#, fuzzy, c-format
msgid "unknown option -%s"
msgstr "%s: 未知命令: %s\n"

#: text-utils/more.c:572
#, c-format
msgid ""
"\n"
"*** %s: directory ***\n"
"\n"
msgstr ""

#: text-utils/more.c:616
#, c-format
msgid ""
"\n"
"******** %s: Not a text file ********\n"
"\n"
msgstr ""

#: text-utils/more.c:720
#, c-format
msgid "[Use q or Q to quit]"
msgstr ""

#: text-utils/more.c:795
#, c-format
msgid "--More--"
msgstr ""

#: text-utils/more.c:797
#, c-format
msgid "(Next file: %s)"
msgstr ""

#: text-utils/more.c:802
#, c-format
msgid "[Press space to continue, 'q' to quit.]"
msgstr ""

#: text-utils/more.c:1235
#, c-format
msgid "...back %d pages"
msgstr ""

#: text-utils/more.c:1237
msgid "...back 1 page"
msgstr ""

#: text-utils/more.c:1280
msgid "...skipping one line"
msgstr ""

#: text-utils/more.c:1282
#, c-format
msgid "...skipping %d lines"
msgstr ""

#: text-utils/more.c:1319
msgid ""
"\n"
"***Back***\n"
"\n"
msgstr ""

#: text-utils/more.c:1357
msgid ""
"\n"
"Most commands optionally preceded by integer argument k.  Defaults in "
"brackets.\n"
"Star (*) indicates argument becomes new default.\n"
msgstr ""

#: text-utils/more.c:1364
msgid ""
"<space>                 Display next k lines of text [current screen size]\n"
"z                       Display next k lines of text [current screen size]*\n"
"<return>                Display next k lines of text [1]*\n"
"d or ctrl-D             Scroll k lines [current scroll size, initially 11]*\n"
"q or Q or <interrupt>   Exit from more\n"
"s                       Skip forward k lines of text [1]\n"
"f                       Skip forward k screenfuls of text [1]\n"
"b or ctrl-B             Skip backwards k screenfuls of text [1]\n"
"'                       Go to place where previous search started\n"
"=                       Display current line number\n"
"/<regular expression>   Search for kth occurrence of regular expression [1]\n"
"n                       Search for kth occurrence of last r.e [1]\n"
"!<cmd> or :!<cmd>       Execute <cmd> in a subshell\n"
"v                       Start up /usr/bin/vi at current line\n"
"ctrl-L                  Redraw screen\n"
":n                      Go to kth next file [1]\n"
":p                      Go to kth previous file [1]\n"
":f                      Display current file name and line number\n"
".                       Repeat previous command\n"
msgstr ""

#: text-utils/more.c:1433 text-utils/more.c:1438
#, c-format
msgid "[Press 'h' for instructions.]"
msgstr ""

#: text-utils/more.c:1472
#, c-format
msgid "\"%s\" line %d"
msgstr ""

#: text-utils/more.c:1474
#, c-format
msgid "[Not a file] line %d"
msgstr ""

#: text-utils/more.c:1558
msgid "  Overflow\n"
msgstr ""

#: text-utils/more.c:1605
msgid "...skipping\n"
msgstr ""

#: text-utils/more.c:1634
msgid "Regular expression botch"
msgstr ""

#: text-utils/more.c:1642
msgid ""
"\n"
"Pattern not found\n"
msgstr ""

#: text-utils/more.c:1645 text-utils/pg.c:1116 text-utils/pg.c:1267
msgid "Pattern not found"
msgstr ""

#: text-utils/more.c:1692
msgid "exec failed\n"
msgstr ""

#: text-utils/more.c:1706
msgid "can't fork\n"
msgstr ""

#: text-utils/more.c:1745
msgid ""
"\n"
"...Skipping "
msgstr ""

#: text-utils/more.c:1749
msgid "...Skipping to file "
msgstr ""

#: text-utils/more.c:1751
msgid "...Skipping back to file "
msgstr ""

#: text-utils/more.c:2027
msgid "Line too long"
msgstr ""

#: text-utils/more.c:2062
msgid "No previous command to substitute for"
msgstr ""

#: text-utils/parse.c:67
msgid "line too long"
msgstr ""

#: text-utils/parse.c:399
msgid "byte count with multiple conversion characters"
msgstr ""

#: text-utils/parse.c:478
#, c-format
msgid "bad byte count for conversion character %s"
msgstr ""

#: text-utils/parse.c:483
#, c-format
msgid "%%s requires a precision or a byte count"
msgstr ""

#: text-utils/parse.c:488
#, c-format
msgid "bad format {%s}"
msgstr ""

#: text-utils/parse.c:493
#, c-format
msgid "bad conversion character %%%s"
msgstr ""

#: text-utils/pg.c:147
msgid ""
"All rights reserved.\n"
"-------------------------------------------------------\n"
"  h                       this screen\n"
"  q or Q                  quit program\n"
"  <newline>               next page\n"
"  f                       skip a page forward\n"
"  d or ^D                 next halfpage\n"
"  l                       next line\n"
"  $                       last page\n"
"  /regex/                 search forward for regex\n"
"  ?regex? or ^regex^      search backward for regex\n"
"  . or ^L                 redraw screen\n"
"  w or z                  set page size and go to next page\n"
"  s filename              save current file to filename\n"
"  !command                shell escape\n"
"  p                       go to previous file\n"
"  n                       go to next file\n"
"\n"
"Many commands accept preceding numbers, for example:\n"
"+1<newline> (next page); -1<newline> (previous page); 1<newline> (first "
"page).\n"
"\n"
"See pg(1) for more information.\n"
"-------------------------------------------------------\n"
msgstr ""

#: text-utils/pg.c:223
#, c-format
msgid ""
"%s: Usage: %s [-number] [-p string] [-cefnrs] [+line] [+/pattern/] [files]\n"
msgstr ""

#: text-utils/pg.c:232
#, c-format
msgid "%s: option requires an argument -- %s\n"
msgstr ""

#: text-utils/pg.c:240
#, c-format
msgid "%s: illegal option -- %s\n"
msgstr ""

#: text-utils/pg.c:357
msgid "...skipping forward\n"
msgstr ""

#: text-utils/pg.c:359
msgid "...skipping backward\n"
msgstr ""

#: text-utils/pg.c:381
msgid "No next file"
msgstr ""

#: text-utils/pg.c:385
msgid "No previous file"
msgstr ""

#: text-utils/pg.c:920
#, c-format
msgid "%s: Read error from %s file\n"
msgstr ""

#: text-utils/pg.c:926
#, c-format
msgid "%s: Unexpected EOF in %s file\n"
msgstr ""

#: text-utils/pg.c:929
#, c-format
msgid "%s: Unknown error in %s file\n"
msgstr ""

#: text-utils/pg.c:1024
#, c-format
msgid "%s: Cannot create tempfile\n"
msgstr ""

#: text-utils/pg.c:1033 text-utils/pg.c:1208 text-utils/pg.c:1235
msgid "RE error: "
msgstr ""

#: text-utils/pg.c:1190
msgid "(EOF)"
msgstr ""

#: text-utils/pg.c:1216 text-utils/pg.c:1243
msgid "No remembered search string"
msgstr ""

#: text-utils/pg.c:1299
msgid "Cannot open "
msgstr ""

#: text-utils/pg.c:1347
msgid "saved"
msgstr ""

#: text-utils/pg.c:1454
msgid ": !command not allowed in rflag mode.\n"
msgstr ""

#: text-utils/pg.c:1486
msgid "fork() failed, try again later\n"
msgstr ""

#: text-utils/pg.c:1694
msgid "(Next file: "
msgstr ""

#: text-utils/rev.c:76
#, fuzzy, c-format
msgid "Usage: %s [options] [file ...]\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/rev.c:79
#, c-format
msgid ""
"\n"
"Options:\n"
" -V, --version   output version information and exit\n"
" -h, --help      display this help and exit\n"
msgstr ""

#: text-utils/rev.c:83
#, c-format
msgid ""
"\n"
"For more information see rev(1).\n"
msgstr ""

#: text-utils/tailf.c:61 text-utils/tailf.c:98
#, c-format
msgid "cannot open \"%s\" for read"
msgstr ""

#: text-utils/tailf.c:101 text-utils/tailf.c:278
#, c-format
msgid "cannot stat \"%s\""
msgstr ""

#: text-utils/tailf.c:114
#, c-format
msgid "incomplete write to \"%s\" (written %zd, expected %zd)\n"
msgstr ""

#: text-utils/tailf.c:160
#, c-format
msgid "%s: cannot add inotify watch (limit of inotify watches was reached)."
msgstr ""

#: text-utils/tailf.c:164
#, c-format
msgid "%s: cannot add inotify watch."
msgstr ""

#: text-utils/tailf.c:173
#, fuzzy, c-format
msgid "%s: cannot read inotify events"
msgstr "%s: 不能打开 %s\n"

#: text-utils/tailf.c:197
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [option] file\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/tailf.c:202
#, c-format
msgid ""
"\n"
"Options:\n"
" -n, --lines NUMBER  output the last NUMBER lines\n"
" -NUMBER             same as `-n NUMBER'\n"
" -V, --version       output version information and exit\n"
" -h, --help          display this help and exit\n"
"\n"
msgstr ""

#: text-utils/tailf.c:220 text-utils/tailf.c:260
#, fuzzy
msgid "failed to parse number of lines"
msgstr "不能读 inodes"

#: text-utils/tailf.c:273
msgid "no input file specified"
msgstr ""

#: text-utils/ul.c:135
#, fuzzy, c-format
msgid ""
"\n"
"Usage:\n"
" %s [options] [file...]\n"
msgstr "用法: %s [ -n ] device\n"

#: text-utils/ul.c:139
#, c-format
msgid ""
"\n"
"Options:\n"
" -t, --terminal TERMINAL    override the TERM environment variable\n"
" -i, --indicated            underlining is indicated via a separate line\n"
" -V, --version              output version information and exit\n"
" -h, --help                 display this help and exit\n"
"\n"
msgstr ""

#: text-utils/ul.c:208
msgid "trouble reading terminfo"
msgstr ""

#: text-utils/ul.c:213
#, c-format
msgid "terminal `%s' is not known, defaulting to `dumb'"
msgstr ""

#: text-utils/ul.c:312
#, c-format
msgid "unknown escape sequence in input: %o, %o"
msgstr ""

#: text-utils/ul.c:649
msgid "Input line too long."
msgstr ""

#, fuzzy
#~ msgid ""
#~ "\n"
#~ "Usage:\n"
#~ "  %s [options] device [...]\n"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid ""
#~ "Usage: %s [options]\n"
#~ "\n"
#~ "Options:\n"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid ""
#~ "\n"
#~ "Usage:\n"
#~ " %s [options] [file]\n"
#~ msgstr "用法: %s [ -n ] device\n"

#~ msgid "  %s --report [devices]\n"
#~ msgstr "  %s --report [devices]\n"

#~ msgid "  %s [-v|-q] commands devices\n"
#~ msgstr "  %s [-v|-q] commands devices\n"

#~ msgid "Available commands:\n"
#~ msgstr "可用的命令:\n"

#~ msgid "usage: %s [ -n ] device\n"
#~ msgstr "用法: %s [ -n ] device\n"

#~ msgid "%s: not a block device\n"
#~ msgstr "%s:不是一个块设备\n"

#, fuzzy
#~ msgid "%s: calloc() failed: %s\n"
#~ msgstr "%s 失败.\n"

#, fuzzy
#~ msgid ""
#~ "Usage:\n"
#~ "  %s "
#~ msgstr "用法:\n"

#, fuzzy
#~ msgid "%s: Unable to allocate memory for fsck_path\n"
#~ msgstr "不能为 inodes 分配缓冲区"

#, fuzzy
#~ msgid "Usage: %s [y | n]"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid "usage: %s [-n] [file]\n"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid "can't read: %s"
#~ msgstr "%s 失败.\n"

#, fuzzy
#~ msgid "Usage: %s [-r] [-t]\n"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid "error: calloc failed"
#~ msgstr "查找失败"

#, fuzzy
#~ msgid "usage: %s [-bfpx] [-l nline]"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid "Usage: %s [file ...]\n"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid "Usage: %s [ -i ] [ -tTerm ] file...\n"
#~ msgstr "用法: %s [ -n ] device\n"

#, fuzzy
#~ msgid "strdup failed"
#~ msgstr "%s 失败.\n"

#, fuzzy
#~ msgid "cannot parse number '%s'"
#~ msgstr "%s: 不能打开 %s\n"

#, fuzzy
#~ msgid "execvp failed"
#~ msgstr "查找失败"