+ /*
+ * gd->ram_size has the total size of DDR memory, less reserved secure
+ * memory. The DDR extends from low region to high region(s) presuming
+ * no hole is created with DDR configuration. gd->arch.secure_ram tracks
+ * the location of secure memory. gd->arch.resv_ram tracks the location
+ * of reserved memory for Management Complex (MC).
+ */
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
+ gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
+ gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
+ gd->bd->bi_dram[1].size = gd->ram_size -
+ CONFIG_SYS_DDR_BLOCK1_SIZE;
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+ if (gd->bi_dram[1].size > CONFIG_SYS_DDR_BLOCK2_SIZE) {
+ gd->bd->bi_dram[2].start = CONFIG_SYS_DDR_BLOCK3_BASE;
+ gd->bd->bi_dram[2].size = gd->bd->bi_dram[1].size -
+ CONFIG_SYS_DDR_BLOCK2_SIZE;
+ gd->bd->bi_dram[1].size = CONFIG_SYS_DDR_BLOCK2_SIZE;
+ }
+#endif
+ } else {
+ gd->bd->bi_dram[0].size = gd->ram_size;
+ }
+#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+ if (gd->bd->bi_dram[2].size >= CONFIG_SYS_MEM_RESERVE_SECURE) {
+ gd->bd->bi_dram[2].size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+ gd->arch.secure_ram = gd->bd->bi_dram[2].start +
+ gd->bd->bi_dram[2].size;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+ } else
+#endif
+ {
+ if (gd->bd->bi_dram[1].size >= CONFIG_SYS_MEM_RESERVE_SECURE) {
+ gd->bd->bi_dram[1].size -=
+ CONFIG_SYS_MEM_RESERVE_SECURE;
+ gd->arch.secure_ram = gd->bd->bi_dram[1].start +
+ gd->bd->bi_dram[1].size;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+ } else if (gd->bd->bi_dram[0].size >
+ CONFIG_SYS_MEM_RESERVE_SECURE) {
+ gd->bd->bi_dram[0].size -=
+ CONFIG_SYS_MEM_RESERVE_SECURE;
+ gd->arch.secure_ram = gd->bd->bi_dram[0].start +
+ gd->bd->bi_dram[0].size;
+ gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
+ gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
+ }
+ }
+#endif /* CONFIG_SYS_MEM_RESERVE_SECURE */
+
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
+ /* Assign memory for MC */
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+ if (gd->bd->bi_dram[2].size >=
+ board_reserve_ram_top(gd->bd->bi_dram[2].size)) {
+ gd->arch.resv_ram = gd->bd->bi_dram[2].start +
+ gd->bd->bi_dram[2].size -
+ board_reserve_ram_top(gd->bd->bi_dram[2].size);
+ } else
+#endif
+ {
+ if (gd->bd->bi_dram[1].size >=
+ board_reserve_ram_top(gd->bd->bi_dram[1].size)) {
+ gd->arch.resv_ram = gd->bd->bi_dram[1].start +
+ gd->bd->bi_dram[1].size -
+ board_reserve_ram_top(gd->bd->bi_dram[1].size);
+ } else if (gd->bd->bi_dram[0].size >
+ board_reserve_ram_top(gd->bd->bi_dram[0].size)) {
+ gd->arch.resv_ram = gd->bd->bi_dram[0].start +
+ gd->bd->bi_dram[0].size -
+ board_reserve_ram_top(gd->bd->bi_dram[0].size);
+ }
+ }
+#endif /* CONFIG_FSL_MC_ENET */
+
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+#error "This SoC shouldn't have DP DDR"
+#endif
+ if (soc_has_dp_ddr()) {
+ /* initialize DP-DDR here */
+ puts("DP-DDR: ");
+ /*
+ * DDR controller use 0 as the base address for binding.
+ * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
+ */
+ dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
+ CONFIG_DP_DDR_CTRL,
+ CONFIG_DP_DDR_NUM_CTRLS,
+ CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
+ NULL, NULL, NULL);
+ if (dp_ddr_size) {
+ gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
+ gd->bd->bi_dram[2].size = dp_ddr_size;
+ } else {
+ puts("Not detected");
+ }
+ }
+#endif
+
+ return 0;
+}
+
+#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD)
+void efi_add_known_memory(void)
+{
+ int i;
+ phys_addr_t ram_start, start;
+ phys_size_t ram_size;
+ u64 pages;
+
+ /* Add RAM */
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+#error "This SoC shouldn't have DP DDR"
+#endif
+ if (i == 2)
+ continue; /* skip DP-DDR */
+#endif
+ ram_start = gd->bd->bi_dram[i].start;
+ ram_size = gd->bd->bi_dram[i].size;
+#ifdef CONFIG_RESV_RAM
+ if (gd->arch.resv_ram >= ram_start &&
+ gd->arch.resv_ram < ram_start + ram_size)
+ ram_size = gd->arch.resv_ram - ram_start;
+#endif
+ start = (ram_start + EFI_PAGE_MASK) & ~EFI_PAGE_MASK;
+ pages = (ram_size + EFI_PAGE_MASK) >> EFI_PAGE_SHIFT;
+
+ efi_add_memory_map(start, pages, EFI_CONVENTIONAL_MEMORY,
+ false);
+ }
+}
+#endif
+
+/*
+ * Before DDR size is known, early MMU table have DDR mapped as device memory
+ * to avoid speculative access. To relocate U-Boot to DDR, "normal memory"
+ * needs to be set for these mappings.
+ * If a special case configures DDR with holes in the mapping, the holes need
+ * to be marked as invalid. This is not implemented in this function.
+ */
+void update_early_mmu_table(void)
+{
+ if (!gd->arch.tlb_addr)
+ return;
+
+ if (gd->ram_size <= CONFIG_SYS_FSL_DRAM_SIZE1) {
+ mmu_change_region_attr(
+ CONFIG_SYS_SDRAM_BASE,
+ gd->ram_size,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+ } else {
+ mmu_change_region_attr(
+ CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_DDR_BLOCK1_SIZE,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
+#ifndef CONFIG_SYS_DDR_BLOCK2_SIZE
+#error "Missing CONFIG_SYS_DDR_BLOCK2_SIZE"
+#endif
+ if (gd->ram_size - CONFIG_SYS_DDR_BLOCK1_SIZE >
+ CONFIG_SYS_DDR_BLOCK2_SIZE) {
+ mmu_change_region_attr(
+ CONFIG_SYS_DDR_BLOCK2_BASE,
+ CONFIG_SYS_DDR_BLOCK2_SIZE,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+ mmu_change_region_attr(
+ CONFIG_SYS_DDR_BLOCK3_BASE,
+ gd->ram_size -
+ CONFIG_SYS_DDR_BLOCK1_SIZE -
+ CONFIG_SYS_DDR_BLOCK2_SIZE,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+ } else
+#endif
+ {
+ mmu_change_region_attr(
+ CONFIG_SYS_DDR_BLOCK2_BASE,
+ gd->ram_size -
+ CONFIG_SYS_DDR_BLOCK1_SIZE,
+ PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_OUTER_SHARE |
+ PTE_BLOCK_NS |
+ PTE_TYPE_VALID);
+ }
+ }
+}
+
+__weak int dram_init(void)
+{
+ fsl_initdram();
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+ /* This will break-before-make MMU for DDR */
+ update_early_mmu_table();
+#endif
+
+ return 0;