Changes for U-Boot 1.1.4:
======================================================================
+* Cleanup
+
+* Update ARM Integrator boards:
+ Correct addessing errors in platform files.
+ Split off common core module data from Integrator header files to
+ include/armcoremodule.h.
+ Patch by Peter Pearse, 04 Oct 2005
+
+* Make sure only supported compiler options are used
+ Import "cc-option" shell function from kernel and
+ use it to get the correct ARM GCC options for individual CPUs
+ Patch by Peter Pearse, 30 Jun 2005
+
+* Fix 440GR to print correct cpu revision
+ Patch by Stefan Roese, 04 Oct 2005
+
+* Change board message on AMCC Yosemite & Yellowstone to common style
+ Patch by Stefan Roese, 03 Oct 2005
+
+* Fix compiler warning
+
+* Fix FEC PHY addresses for TQM85xx boards
+
+* Fix uninitialized variable problem in hush shell
+ Patch by Lars Rostock, 26 Sep 2005
+
+* Undo change of f6e20fc6ca... to include/configs/trab.h
+ (Must have been an accident?)
+
+* Add support for AT91RM9200 OHCI Controller.
+ Patch by Eric Benard, 07 Apr 2005
+
+* Update ARM mach-types.h
+ Patch by Eric Benard, 07 Apr 2005
+
+* Add support for MP2USB board.
+ Patch by Eric Benard, 07 Apr 2005
+
+* Add board support for armadillo HT1070
+ Patch by Rowel Atienza, 06 Apr 2005
+
+* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
+ Patch by Vitaly Bordug, 30 Mar 2005
+
+* Add iopset command on mpc8xx
+ Patch by Daniel Eisenhut, 25 Mar 2005
+
+* Add support for MII in eepro100 driver.
+ Patch by Gleb Natapov, 21 Mar 2005
+
+* Fixes to the Lubbock (PXA 25x) support:
+ - Resolve the FIXME with respect to saving the u-boot environment.
+ - Make the default load address land in real memory.
+ - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
+ Patch by David Brownell, 10 Mar 2005
+
+* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
+ Patch by Marc Leeman, 04 Mar 2005
+
+* OMAP242x H4 board update
+ - fix for ES2 differences.
+ - switch to using the cfi_flash driver.
+ - fix SRAM build address.
+ - fix for GP device operation.
+ - unlock SRAM for GP devices.
+ - display more device information.
+ - fix potential deadlock in omap24xx_i2c driver.
+ - fix DLL load values to match dpllout*1 operation.
+ - fix 2nd chip select init for combo DDR device.
+ - add support for CFI Intel 28F256L18 on H4 board.
+ Patch by Richard Woodruff, 03 Mar 2005
+
+* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
+ Patch by Steven Scholz, 02 Mar 2005
+
+* Fix typo in eth.c
+ Patch by Ara Avanesyan, 24 Feb 2005
+
+* Remove unneeded #include <malloc.h>
+ Patch by Ladislav Michl, 22 Feb 2005
+
+* Add cramfs support for m68k
+ Patch by Zachary Landau, 21 Feb 2005
+
+* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
+ Patch by Jeff Angielski, 21 Feb 2005
+
+* Fix au1x00_serial baud rate calculation:
+ remove hardcoded cpu clock divisor and use register instead;
+ round up instead of truncate
+ Patch by Andrew Dyer, 15 Feb 2005
+
+* Add Xilinx Spartan3 family FPGA support
+ Patch by Kurt Stremerch, 14 Feb 2005
+
+* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
+ Patch by Zachary Landau, 11 Feb 2005
+
+* Fix VOH405 Support
+ Patch by Matthias Fuchs, 25 Sep 2005
+
+* Added support for PCI bridge on MPC8272ADS
+ Patch by Vitaly Bordug, Feb 09 2005
+
+* Update multicore CM9XX support for Integrator AP to allow booting from flash
+ Patch by Jean-Paul Saman, 8 Feb 2005
+
+* Fix strswab() to reliably find end of string
+ Patch by Andrew Dyer, 08 Feb 2005
+
+* Fix typos in include/ppc440.h
+ Patch by Andrew E Mileski, 04 Feb 2005
+
+* Add Vibren (was Accelent) PXA255 IDP Support
+ Patch by Cliff Brake, 04 Feb 2005
+
+* Fix tools/bmp_logo.c using incorrect offset to pixel data
+ Patch by Andrew Dyer, 31 Jan 2005
+
+* Add ARM946E cpu and core module targets; remap memory to 0x00000000
+ Patch by Peter Pearse, 2 Feb 2005
+
+* Fix error handling in tools/env/fw_env.c
+ Patch by Ara Avanesyan, 01 Feb 2005
+
+* Fix MGT5100 PSC baudrate calculation
+ Patch by Sebastian Schau, 27 Jan 2005
+
+* OMAP242x fix for GP device booting
+ - Add SRAM unlock for GP devices.
+ - Change DDR DLL unlock value to allow DPLLout*1 operation.
+ Patches by Richard Woodruff, 21 Jan 2005:
+
+* Add support for AMD's Pb1x00 eval board;
+ add MII routines to the au1x00 ethernet driver;
+ add USB ohci driver (work in progress)
+ Patch by Thomas Sailer, 20 Jan 2005
+
+* Update omap5912osk board
+ Use drivers/cfi_flash.c instead of private flash driver;
+ Remove hardcoded personalized settings from omap5912osk.h;
+ Fix spacing with (RO) marks in 'flinfo' output.
+ Patch by Michael Bendzick, 14 Jan 2005
+
+* Fix warnings for PCI code on ixp
+ Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
+
+* virtex2 fix for bogus download error messages
+ The virtex2 FPGA download code watches for init going active during
+ a download of config data as an error condition. init also goes
+ active after a configuration is finished in concert with the done
+ signal. So far, the code does not check for done active until all
+ of the configuration data is sent. If configuration data has a few
+ extra pad bytes at the end, this would cause an error message even
+ though the download had suceeded.
+ NOTE: virtex2 slave serial and spartan2 versions may still have the
+ same problem.
+ Patch by Andrew Dyer, 12 Jan 2005
+
+* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
+ Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
+ message when probing for nonexistent flash in little endian mode.
+ As a side effect more efficient and smaller code is generated,
+ which is always a Good Thing (TM).
+ Patch by Ladislav Michl, 24 Sep 2005
+
+* Update for TFTP using a fixed UDP port
+ Use the approved environment variable names. Added "tftpdstp" to
+ allow ports other than 69 per Tolunay Orkun's recommendation.
+ Patch by Jerry Van Baren, 12 Jan 2005
+
+* Allow to force TFTP to use a fixed UDP port
+ (Add a configuration option CONFIG_TFTP_PORT and optional env
+ variable tftpport)
+ Patch by Jerry Van Baren, 10 Jan 2005
+
+* Fix ethernet timeouts on dbau1550 and other au1x00 systems
+ Patch by Leif Lindholm, 29 Dec 2004
+
+* Cleanup: fix broken builds
+
+* Fix PHY address argument passing with mii info command
+ Patch by Andrew Dyer, 28 Dec 2004
+
+* Cleanup (PPC4xx is AMCC now)
+
+* esd CPCI2DP board added
+ Patch by Matthias Fuchs, 22 Sep 2005
+
+* esd PMC405 board updated
+ Patch by Matthias Fuchs, 22 Sep 2005
+
+* Add SM501 support to HH405 board.
+ Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
+ Add support for eeprom write-enable (CFG_EEPROM_WREN).
+ Patch by Stefan Roese, 22 Sep 2005
+
+* Fix autonegotiation in tsec ethernet driver
+ Patch by Stefan Roese, 21 Sep 2005
+
+* Fix bug in auto_update (trab board)
+ Patch by Martin Krause, 16 Sep 2005
+
+* Fix computation of framebuffer palette for 8bpp LCD bitmaps
+ Patch by Francesco Mandracci, 16 Sep 2005
+
+* Update configuration for INKA4x0 board
+
+* Update configuration for PM854 board
+ Based on patch by R. Loeffl, 20 Jul 2005
+
+* Add PCI support to TQM8540 and TQM8560 boards
+ Patch by Stefan Roese, 15 Sep 2005
+
+* Update AMCC Yosemite to get a consistent setup for all AMCC eval
+ boards (baudrate, environment...). Flash driver fixed.
+ Patch by Stefan Roese, 15 Sep 2005
+
+* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
+ ethernet port on ebony.
+ Patch by Stefan Roese, 7 Sep 2005
+
+* Added support for mtddevnum and mtddevname variables (mtdparts command)
+
+* Change default console baud rate for stxxtc board
+
+* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
+ Patch by Stefan Roese, 31 Aug 2005
+
+* Fix default command set (don't include CFG_CMD_DISPLAY command)
+ Patch by Pantelis Antoniou, 02 Sep 2005
+
+* Cleanup
+
+* Enable SM712 driver support for HMI1001 board.
+
+* Fix problems with ld version 2.16 (dot outside sections problem)
+ Pointed out by Gerhard Jaeger, 31 Aug 2005;
+ cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
+
+* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
+
+* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
+
+* Add keyboard and dot matrix display support for HMI1001 board.
+
+* Prepare U-Boot for gcc-4.x
+
+* Fixed Bamboo port to enable running without DDR-DIMM
+ (Bamboo has also 64MB onboard DDR)
+ Patch by Stefan Roese, 24 Aug 2005
+
+* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
+ now handling all 4xx cpu's
+ Patch by Stefan Roese, 16 Aug 2005
+
+* Fix make dependencies for at91rm9200 and ks8695 cpus
+ Patch by Steven Scholz, 23 Aug 2005
+
+* Add JFFS2 support for TQM5200 board
+
+* Add esd cpci5200 and pf5200 boards
+ Patch by Reinhard Arlt, 22 Aug 2005
+
+* Fix sysclock for TQM8540 and TQM8560 boards
+ Patch by Martin Krause, 25 Jul 2005
+
* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
Patch by Martin Krause, 08 Jun 2005