# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
SUBDIRS = tools \
- examples \
- api_examples
+ examples/standalone \
+ examples/api
.PHONY : $(SUBDIRS)
include $(obj)include/config.mk
export ARCH CPU BOARD VENDOR SOC
-ifndef CROSS_COMPILE
+# set default to nothing for native builds
ifeq ($(HOSTARCH),$(ARCH))
-CROSS_COMPILE =
-else
-ifeq ($(ARCH),ppc)
-CROSS_COMPILE = ppc_8xx-
-endif
-ifeq ($(ARCH),arm)
-CROSS_COMPILE = arm-linux-
-endif
-ifeq ($(ARCH),i386)
-CROSS_COMPILE = i386-linux-
-endif
-ifeq ($(ARCH),mips)
-CROSS_COMPILE = mips_4KC-
-endif
-ifeq ($(ARCH),nios)
-CROSS_COMPILE = nios-elf-
-endif
-ifeq ($(ARCH),nios2)
-CROSS_COMPILE = nios2-elf-
-endif
-ifeq ($(ARCH),m68k)
-CROSS_COMPILE = m68k-elf-
-endif
-ifeq ($(ARCH),microblaze)
-CROSS_COMPILE = mb-
-endif
-ifeq ($(ARCH),blackfin)
-CROSS_COMPILE = bfin-uclinux-
-endif
-ifeq ($(ARCH),avr32)
-CROSS_COMPILE = avr32-linux-
+CROSS_COMPILE ?=
endif
-ifeq ($(ARCH),sh)
-CROSS_COMPILE = sh4-linux-
-endif
-ifeq ($(ARCH),sparc)
-CROSS_COMPILE = sparc-elf-
-endif # sparc
-endif # HOSTARCH,ARCH
-endif # CROSS_COMPILE
-
-export CROSS_COMPILE
# load other configuration
include $(TOPDIR)/config.mk
LIBS += drivers/mmc/libmmc.a
LIBS += drivers/mtd/libmtd.a
LIBS += drivers/mtd/nand/libnand.a
-LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
LIBS += drivers/mtd/onenand/libonenand.a
LIBS += drivers/mtd/ubi/libubi.a
LIBS += drivers/mtd/spi/libspi_flash.a
$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT)
$(GEN_UBOOT)
ifeq ($(CONFIG_KALLSYMS),y)
- smap=`$(call SYSTEM_MAP,u-boot) | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\0"}'` ; \
+ smap=`$(call SYSTEM_MAP,u-boot) | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
$(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" -c common/system_map.c -o $(obj)common/system_map.o
$(GEN_UBOOT) $(obj)common/system_map.o
endif
TAG_SUBDIRS += drivers/mmc
TAG_SUBDIRS += drivers/mtd
TAG_SUBDIRS += drivers/mtd/nand
-TAG_SUBDIRS += drivers/mtd/nand_legacy
TAG_SUBDIRS += drivers/mtd/onenand
TAG_SUBDIRS += drivers/mtd/spi
TAG_SUBDIRS += drivers/net
mv $@.tmp $@
sinclude $(obj)include/autoconf.mk.dep
+sinclude $(obj)include/autoconf.mk
#########################################################################
else # !config.mk
o2dnt_config: unconfig
@$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
+pcm030_config \
+pcm030_LOWBOOT_config: unconfig
+ @mkdir -p $(obj)include $(obj)board/phytec/pcm030
+ @ >$(obj)include/config.h
+ @[ -z "$(findstring LOWBOOT_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \
+ echo "... with LOWBOOT configuration" ; \
+ }
+ @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec
+
pf5200_config: unconfig
@$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd
sbc8641d_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
+XPEDITE5170_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes
+
#########################################################################
## 74xx/7xx Systems
#########################################################################
at91sam9261ek_nandflash_config \
at91sam9261ek_dataflash_cs0_config \
at91sam9261ek_dataflash_cs3_config \
-at91sam9261ek_config : unconfig
- @mkdir -p $(obj)include
+at91sam9261ek_config \
+at91sam9g10ek_nandflash_config \
+at91sam9g10ek_dataflash_cs0_config \
+at91sam9g10ek_dataflash_cs3_config \
+at91sam9g10ek_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring 9g10,$@)" ] ; then \
+ echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... 9G10 Variant" ; \
+ else \
+ echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \
+ fi;
@if [ "$(findstring _nandflash,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in NAND FLASH" ; \
- elif [ "$(findstring dataflash_cs3,$@)" ] ; then \
+ elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \
$(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
else \
pm9261_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
+at91sam9m10g45ek_nandflash_config \
+at91sam9m10g45ek_dataflash_config \
+at91sam9m10g45ek_dataflash_cs0_config \
+at91sam9m10g45ek_config \
+at91sam9g45ekes_nandflash_config \
+at91sam9g45ekes_dataflash_config \
+at91sam9g45ekes_dataflash_cs0_config \
+at91sam9g45ekes_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring 9m10,$@)" ] ; then \
+ echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... 9M10G45 Variant" ; \
+ else \
+ echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
+ fi;
+
+ @if [ "$(findstring _nandflash,$@)" ] ; then \
+ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in NAND FLASH" ; \
+ else \
+ echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \
+ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+ fi;
+ @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
+
pm9263_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
@ > $(obj)include/config.h
@if [ "$(findstring _onenand, $@)" ] ; then \
echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
- $(XECHO) "... configured for OneNand Flash"; \
+ $(XECHO) "... configured to boot from OneNand Flash"; \
else \
- $(XECHO) "... configured for Nand Flash"; \
+ $(XECHO) "... configured to boot from Nand Flash"; \
fi
@$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik
mx31ads_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
-mx31pdk_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 mx31pdk freescale mx31
+mx31pdk_config \
+mx31pdk_nand_config : unconfig
+ @mkdir -p $(obj)include
+ @if [ -n "$(findstring _nand_,$@)" ]; then \
+ echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \
+ else \
+ echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \
+ echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \
+ fi
+ @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31
omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
sh7785lcr_32bit_config \
sh7785lcr_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_SH7785LCR 1" >> include/config.h
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/renesas/sh7785lcr
+ @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
@if [ "$(findstring 32bit, $@)" ] ; then \
echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
- cp $(obj)board/renesas/sh7785lcr/u-boot_32bit \
- $(obj)board/renesas/sh7785lcr/u-boot.lds ; \
echo "TEXT_BASE = 0x8ff80000" > \
$(obj)board/renesas/sh7785lcr/config.tmp ; \
$(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
- else \
- cp $(obj)board/renesas/sh7785lcr/u-boot_29bit \
- $(obj)board/renesas/sh7785lcr/u-boot.lds ; \
fi
@$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
@echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
+espt_config : unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
+
#========================================================================
# SPARC
#========================================================================
#########################################################################
clean:
- @rm -f $(obj)examples/82559_eeprom $(obj)examples/eepro100_eeprom \
- $(obj)examples/hello_world $(obj)examples/interrupt \
- $(obj)examples/mem_to_mem_idma2intr \
- $(obj)examples/sched $(obj)examples/smc91111_eeprom \
- $(obj)examples/test_burst $(obj)examples/timer
+ @rm -f $(obj)examples/standalone/82559_eeprom \
+ $(obj)examples/standalone/eepro100_eeprom \
+ $(obj)examples/standalone/hello_world \
+ $(obj)examples/standalone/interrupt \
+ $(obj)examples/standalone/mem_to_mem_idma2intr \
+ $(obj)examples/standalone/sched \
+ $(obj)examples/standalone/smc91111_eeprom \
+ $(obj)examples/standalone/test_burst \
+ $(obj)examples/standalone/timer
+ @rm -f $(obj)examples/api/demo{,.bin}
@rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \
$(obj)tools/env/{fw_printenv,fw_setenv} \
$(obj)tools/envcrc \
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map}
@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map}
- @rm -f $(obj)api_examples/demo $(TIMESTAMP_FILE) $(VERSION_FILE)
+ @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
-o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \
@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f
@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f
- @[ ! -d $(obj)api_examples ] || find $(obj)api_examples -name "*" -type l -print | xargs rm -f
ifeq ($(OBJTREE),$(SRCTREE))
mrproper \
projects / people / ms / u-boot.git / blobdiff