pinctrl: uniphier: fix Ethernet (RMII) pin-mux setting for LD20

[people/ms/u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index f5f82d203cca20662b7110038a9c45a62442b1d5..262df7cd63ba782093da71da8625842268a8bbca 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -5,7 +5,7 @@
 VERSION = 2017
 PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 NAME =
 
 # *DOCUMENTATION*
@@ -763,7 +763,11 @@ ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
 endif
 endif
 ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
+ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy)
+ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
+else
 ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
+endif
 ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
 ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
 ifeq ($(CONFIG_SPL_FRAMEWORK),y)
@@ -809,9 +813,11 @@ cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 quiet_cmd_efipayload = OBJCOPY $@
 cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
 
+MKIMAGEOUTPUT ?= /dev/null
+
 quiet_cmd_mkimage = MKIMAGE $@
 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
-       $(if $(KBUILD_VERBOSE:1=), >/dev/null)
+       $(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT))
 
 quiet_cmd_cat = CAT     $@
 cmd_cat = cat $(filter-out $(PHONY), $^) > $@
@@ -938,6 +944,11 @@ else
 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
        -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
+       -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+       -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
+CLEAN_FILES += u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log
 endif
 
 MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
@@ -951,7 +962,7 @@ MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
 MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
                -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
 
-u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl: \
+u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
                $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
        $(call if_changed,mkimage)
 
@@ -1053,50 +1064,11 @@ endif
 
 # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
 # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
-# the middle.
+# the middle. This is handled by binman based on an image description in the
+# board's device tree.
 ifneq ($(CONFIG_X86_RESET_VECTOR),)
 rom: u-boot.rom FORCE
 
-IFDTOOL=$(objtree)/tools/ifdtool
-IFDTOOL_FLAGS  = -f 0:$(objtree)/u-boot.dtb
-IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
-IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-nodtb.bin
-IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
-IFDTOOL_FLAGS += -C
-
-ifneq ($(CONFIG_HAVE_INTEL_ME),)
-IFDTOOL_ME_FLAGS  = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
-IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
-endif
-
-ifneq ($(CONFIG_HAVE_MRC),)
-IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
-endif
-
-ifneq ($(CONFIG_HAVE_FSP),)
-IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_CMC),)
-IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_VGA_BIOS),)
-IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_REFCODE),)
-IFDTOOL_FLAGS += -w $(CONFIG_X86_REFCODE_ADDR):refcode.bin
-endif
-
-quiet_cmd_ifdtool = IFDTOOL $@
-cmd_ifdtool  = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
-ifneq ($(CONFIG_HAVE_INTEL_ME),)
-cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
-endif
-cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
-cmd_ifdtool += mv u-boot.tmp $@
-
 refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
        $(call if_changed,copy)
 
@@ -1106,7 +1078,7 @@ cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
 
 u-boot.rom: u-boot-x86-16bit.bin u-boot.bin FORCE \
                $(if $(CONFIG_HAVE_REFCODE),refcode.bin)
-       $(call if_changed,ifdtool)
+       $(call if_changed,binman)
 
 OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
 u-boot-x86-16bit.bin: u-boot FORCE