#
VERSION = 2009
-PATCHLEVEL = 01
+PATCHLEVEL = 03
SUBLEVEL =
EXTRAVERSION =
ifneq "$(SUBLEVEL)" ""
LIBS = lib_generic/libgeneric.a
LIBS += lib_generic/lzma/liblzma.a
+LIBS += lib_generic/lzo/liblzo.a
LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
"board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
LIBS += cpu/$(CPU)/lib$(CPU).a
endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
- fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a
+ fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \
+ fs/ubifs/libubifs.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += drivers/bios_emulator/libatibiosemu.a
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(obj)u-boot.ldr: $(obj)u-boot
- $(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS)
+ $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
cpci5200_config: unconfig
@$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
+digsy_mtc_config \
+digsy_mtc_LOWBOOT_config \
+digsy_mtc_RAMBOOT_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/digsy_mtc
+ @ >$(obj)include/config.h
+ @[ -z "$(findstring LOWBOOT_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp ; \
+ echo "... with LOWBOOT configuration" ; \
+ }
+ @[ -z "$(findstring RAMBOOT_,$@)" ] || \
+ { echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp ; \
+ echo "... with RAMBOOT configuration" ; \
+ }
+ @$(MKCONFIG) -a digsy_mtc ppc mpc5xxx digsy_mtc
+
hmi1001_config: unconfig
@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
}
@$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
+kmsupx4_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
+
KUP4K_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
mgsuvd_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd keymile
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx km8xx keymile
MHPC_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
TQM8540_config \
TQM8541_config \
TQM8548_config \
+TQM8548_AG_config \
+TQM8548_BE_config \
TQM8555_config \
TQM8560_config: unconfig
@mkdir -p $(obj)include
- @CTYPE=$(subst TQM,,$(@:_config=)); \
- $(XECHO) "... TQM"$${CTYPE}; \
+ @BTYPE=$(@:_config=); \
+ CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
+ $(XECHO) "... "$${BTYPE}" (MPC"$${CTYPE}")"; \
echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
- echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
+ echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
- echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h;
+ echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx tqc
+ @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
XPEDITE5200_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx xpedite5200 xes
ap920t_config \
ap926ejs_config \
ap946es_config: unconfig
- @board/integratorap/split_by_variant.sh $@
+ @board/armltd/integratorap/split_by_variant.sh $@
integratorcp_config \
cp_config \
cp922_config \
cp922_XA10_config \
cp1026_config: unconfig
- @board/integratorcp/split_by_variant.sh $@
+ @board/armltd/integratorcp/split_by_variant.sh $@
davinci_dvevm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci
netstar_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t netstar
+nmdk8815_config \
+nmdk8815_onenand_config: unconfig
+ @mkdir -p $(obj)include
+ @ > $(obj)include/config.h
+ @if [ "$(findstring _onenand, $@)" ] ; then \
+ echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \
+ $(XECHO) "... configured for OneNand Flash"; \
+ else \
+ $(XECHO) "... configured for Nand Flash"; \
+ fi
+ @$(MKCONFIG) -a nmdk8815 arm arm926ejs nmdk8815 st nomadik
+
omap1510inn_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
@$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
smdk2400_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0
smdk2410_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 samsung s3c24x0
-SX1_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm925t sx1
+SX1_stdout_serial_config \
+SX1_config: unconfig
+ @mkdir -p $(obj)include
+ @if [ "$(findstring _stdout_serial_, $@)" ] ; then \
+ echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
+ $(XECHO) "... configured for stdout serial"; \
+ else \
+ echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
+ $(XECHO) "... configured for stdout usbtty"; \
+ fi;
+ @$(MKCONFIG) SX1 arm arm925t sx1
# TRAB default configuration: 8 MB Flash, 32 MB RAM
xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
versatile_config \
versatileab_config \
versatilepb_config : unconfig
- @board/versatile/split_by_variant.sh $@
+ @board/armltd/versatile/split_by_variant.sh $@
voiceblue_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
SMN42_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
+#########################################################################
+## ARM CORTEX Systems
+#########################################################################
+
+omap3_beagle_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 beagle omap3 omap3
+
+omap3_overo_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 overo omap3 omap3
+
+omap3_evm_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 evm omap3 omap3
+
+omap3_pandora_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 pandora omap3 omap3
+
+omap3_zoom1_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 zoom1 omap3 omap3
+
#########################################################################
## XScale Systems
#########################################################################
imx31_litekit_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31
+imx31_phycore_eet_config \
imx31_phycore_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31
+ @if [ -n "$(findstring _eet_,$@)" ]; then \
+ echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \
+ fi
+ @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
mx31ads_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx
+qong_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31
+
+
#########################################################################
## ARM1176 Systems
#########################################################################
#########################################################################
rsk7203_config: unconfig
@mkdir -p $(obj)include
- @echo "#define CONFIG_RSK7203 1" > $(obj)/include/config.h
+ @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh2 rsk7203 renesas
#########################################################################
@echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp renesas
+xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
+sh7785lcr_32bit_config \
sh7785lcr_config : unconfig
@ >include/config.h
@echo "#define CONFIG_SH7785LCR 1" >> include/config.h
- @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr renesas
+ @if [ "$(findstring 32bit, $@)" ] ; then \
+ echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
+ cp $(obj)board/renesas/sh7785lcr/u-boot_32bit \
+ $(obj)board/renesas/sh7785lcr/u-boot.lds ; \
+ echo "TEXT_BASE = 0x8ff80000" > \
+ $(obj)board/renesas/sh7785lcr/config.tmp ; \
+ $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
+ else \
+ cp $(obj)board/renesas/sh7785lcr/u-boot_29bit \
+ $(obj)board/renesas/sh7785lcr/u-boot.lds ; \
+ fi
+ @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
ap325rxa_config : unconfig
@mkdir -p $(obj)include
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \
- $(obj)board/{integratorap,integratorcp}/u-boot.lds \
+ $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \
$(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds \
$(obj)cpu/blackfin/bootrom-asm-offsets.[chs]
@rm -f $(obj)include/bmp_logo.h