VERSION = 2014
PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
ifneq "$(SUBLEVEL)" ""
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
else
include $(TOPDIR)/config.mk
# Targets which don't build the source code
-NON_BUILD_TARGETS = backup clean clobber distclean mkproper tidy unconfig
+NON_BUILD_TARGETS = backup clean clobber distclean mrproper tidy unconfig
# Only do the generic board check when actually building, not configuring
ifeq ($(filter $(NON_BUILD_TARGETS),$(MAKECMDGOALS)),)
BOARD_SIZE_CHECK =
endif
+# Statically apply RELA-style relocations (currently arm64 only)
+ifneq ($(CONFIG_STATIC_RELA),)
+# $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
+DO_STATIC_RELA = \
+ start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
+ end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
+ $(obj)tools/relocate-rela $(2) $(3) $$start $$end
+else
+DO_STATIC_RELA =
+endif
+
# Always append ALL so that arch config.mk's can add custom ones
ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map
ifneq ($(CONFIG_SPL_TARGET),)
ALL-$(CONFIG_SPL) += $(obj)$(CONFIG_SPL_TARGET:"%"=%)
endif
+ALL-$(CONFIG_REMAKE_ELF) += $(obj)u-boot.elf
# enable combined SPL/u-boot/dtb rules for tegra
ifneq ($(CONFIG_TEGRA),)
+ifeq ($(CONFIG_SPL),y)
ifeq ($(CONFIG_OF_SEPARATE),y)
ALL-y += $(obj)u-boot-dtb-tegra.bin
else
ALL-y += $(obj)u-boot-nodtb-tegra.bin
endif
endif
+endif
build := -f $(TOPDIR)/scripts/Makefile.build -C
$(obj)u-boot.bin: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+ $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
$(BOARD_SIZE_CHECK)
$(obj)u-boot.ldr: $(obj)u-boot
$(obj)u-boot.spr: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin
$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER \
- -d $(obj)spl/u-boot-spl.bin $(obj)spl/u-boot-spl.img
- tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_SPL_PAD_TO) \
- of=$(obj)spl/u-boot-spl-pad.img 2>/dev/null
- dd if=$(obj)spl/u-boot-spl.img of=$(obj)spl/u-boot-spl-pad.img \
- conv=notrunc 2>/dev/null
- cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@
+ -d $(obj)spl/u-boot-spl.bin $@
+ $(OBJCOPY) -I binary -O binary \
+ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff $@
+ cat $(obj)u-boot.img >> $@
ifneq ($(CONFIG_TEGRA),)
$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
# at the start padded up to the start of the SPL image. And then concat
# the SPL image to the end.
$(obj)u-boot-img-spl-at-end.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img
- tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_UBOOT_PAD_TO) \
- of=$(obj)u-boot-pad.img 2>/dev/null
- dd if=$(obj)u-boot.img of=$(obj)u-boot-pad.img \
- conv=notrunc 2>/dev/null
- cat $(obj)u-boot-pad.img $(obj)spl/u-boot-spl.bin > $@
+ $(OBJCOPY) -I binary -O binary --pad-to=$(CONFIG_UBOOT_PAD_TO) \
+ --gap-fill=0xff $(obj)u-boot.img $@
+ cat $(obj)spl/u-boot-spl.bin >> $@
+
+# Create a new ELF from a raw binary file. This is useful for arm64
+# where static relocation needs to be performed on the raw binary,
+# but certain simulators only accept an ELF file (but don't do the
+# relocation).
+# FIXME refactor dts/Makefile to share target/arch detection
+$(obj)u-boot.elf: $(obj)u-boot.bin
+ @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \
+ $< $(obj)u-boot-elf.o
+ @$(LD) $(obj)u-boot-elf.o -o $@ \
+ --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \
+ -Ttext=$(CONFIG_SYS_TEXT_BASE)
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
$(MAKE) -C $@ all
endif # config.mk
-# ARM relocations should all be R_ARM_RELATIVE.
+# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
+# R_AARCH64_RELATIVE (64-bit).
checkarmreloc: $(obj)u-boot
- @if test "R_ARM_RELATIVE" != \
- "`$(CROSS_COMPILE)readelf -r $< | cut -d ' ' -f 4 | grep R_ARM | sort -u`"; \
- then echo "$< contains relocations other than \
- R_ARM_RELATIVE"; false; fi
+ @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
+ grep R_A | sort -u`"; \
+ if test "$$RELOC" != "R_ARM_RELATIVE" -a \
+ "$$RELOC" != "R_AARCH64_RELATIVE"; then \
+ echo "$< contains unexpected relocations: $$RELOC"; \
+ false; \
+ fi
$(VERSION_FILE):
@mkdir -p $(dir $(VERSION_FILE))
#########################################################################
clean:
- @rm -f $(obj)examples/standalone/82559_eeprom \
- $(obj)examples/standalone/atmel_df_pow2 \
- $(obj)examples/standalone/eepro100_eeprom \
+ @rm -f $(obj)examples/standalone/atmel_df_pow2 \
$(obj)examples/standalone/hello_world \
$(obj)examples/standalone/interrupt \
$(obj)examples/standalone/mem_to_mem_idma2intr \
$(obj)examples/standalone/timer
@rm -f $(obj)examples/api/demo{,.bin}
@rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \
- $(obj)tools/env/{fw_printenv,fw_setenv} \
+ $(obj)tools/env/fw_printenv \
$(obj)tools/envcrc \
- $(obj)tools/gdb/{astest,gdbcont,gdbsend} \
+ $(obj)tools/gdb/{gdbcont,gdbsend} \
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
$(obj)tools/dump{env,}image \
$(obj)tools/mk{env,}image $(obj)tools/mpc86x_clk \
$(obj)tools/proftool
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/matrix_vision/*/bootscript.img \
- $(obj)board/voiceblue/eeprom \
$(obj)u-boot.lds \
$(obj)arch/blackfin/cpu/init.{lds,elf}
@rm -f $(obj)include/bmp_logo.h
@rm -f $(obj)u-boot.ais
@rm -f $(obj)u-boot.dtb
@rm -f $(obj)u-boot.sb
- @rm -f $(obj)u-boot.bd
@rm -f $(obj)u-boot.spr
@rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}