systemd System and Service Manager
-CHANGES WITH 232 in spe
+CHANGES WITH 232:
* The new RemoveIPC= option can be used to remove IPC objects owned by
the user or group of a service when that service exits.
* The new ProtectKernelModules= option can be used to disable explicit
- load and unload operations of kernel modules by a service.
+ load and unload operations of kernel modules by a service. In
+ addition access to /usr/lib/modules is removed if this option is set.
* ProtectSystem= option gained a new value "strict", which causes the
whole file system tree with the exception of /dev, /proc, and /sys,
ProtectSystem=strict enabled, so they are not able to make any
permanent modifications to the system.
- The nss-systemd module also always resolves root and nobody, making
+ * The nss-systemd module also always resolves root and nobody, making
it possible to have no /etc/passwd or /etc/group files in minimal
- container systems.
+ container or chroot environments.
* Services may be started with their own user namespace using the new
- PrivateUsers= option. Only root, nobody, and the uid/gid under which
- the service is running are mapped. All other users are mapped to
- nobody.
+ boolean PrivateUsers= option. Only root, nobody, and the uid/gid
+ under which the service is running are mapped. All other users are
+ mapped to nobody.
* Support for the cgroup namespace has been added to systemd-nspawn. If
supported by kernel, the container system started by systemd-nspawn
options. This controller requires out-of-tree patches for the kernel
and the support is provisional.
- * .automount units may now be transient.
-
- * systemd-mount is a new tool which wraps mount(8) to pull in
- additional dependencies through transient .mount and .automount
- units. For example, this automatically runs fsck on the block device
- before mounting, and allows the automount logic to be used.
+ * Mount and automount units may now be created transiently
+ (i.e. dynamically at runtime via the bus API, instead of requiring
+ unit files in the file system).
+
+ * systemd-mount is a new tool which may mount file systems – much like
+ mount(8), optionally pulling in additional dependencies through
+ transient .mount and .automount units. For example, this tool
+ automatically runs fsck on a backing block device before mounting,
+ and allows the automount logic to be used dynamically from the
+ command line for establishing mount points. This tool is particularly
+ useful when dealing with removable media, as it will ensure fsck is
+ run – if necessary – before the first access and that the file system
+ is quickly unmounted after each access by utilizing the automount
+ logic. This maximizes the chance that the file system on the
+ removable media stays in a clean state, and if it isn't in a clean
+ state is fixed automatically.
* LazyUnmount=yes option for mount units has been added to expose the
umount --lazy option. Similarly, ForceUnmount=yes exposes the --force
mount the EFI partition on systems where /boot is used for something
else.
+ * When operating on GPT disk images for containers, systemd-nspawn will
+ now mount the ESP to /boot or /efi according to the same rules as PID
+ 1 running on a host. This allows tools like "bootctl" to operate
+ correctly within such containers, in order to make container images
+ bootable on physical systems.
+
* disk/by-id and disk/by-path symlinks are now created for NVMe drives.
* Two new user session targets have been added to support running
the top of the process hierarchy (which is usually the init process
of the container).
- * systemd-journal-gatewayd learned the --directory option to serve
+ * systemd-journal-gatewayd learned the --directory= option to serve
files from the specified location.
* journalctl --root=… can be used to peruse the journal in the
a click rate that is different than the one for the vertical wheel.
* systemd-run gained a new --wait option that makes service execution
- synchronous.
+ synchronous. (Specifically, the command will not return until the
+ specified service binary exited.)
- systemctl gained a new --wait option that causes the start command to
+ * systemctl gained a new --wait option that causes the start command to
wait until the units being started have terminated again.
- * A new journal output mode "short-full" has been added which uses
+ * A new journal output mode "short-full" has been added which displays
timestamps with abbreviated English day names and adds a timezone
- suffix. Those timestamps include more information and can be parsed
- by journalctl.
+ suffix. Those timestamps include more information than the default
+ "short" output mode, and can be passed directly to journalctl's
+ --since= and --until= options.
* /etc/resolv.conf will be bind-mounted into containers started by
systemd-nspawn, if possible, so any changes to resolv.conf contents
are automatically propagated to the container.
* The number of instances for socket-activated services originating
- from a single IP can be limited with MaxConnectionsPerSource=,
- extending the existing setting of MaxConnections.
+ from a single IP address can be limited with
+ MaxConnectionsPerSource=, extending the existing setting of
+ MaxConnections=.
* systemd-networkd gained support for vcan ("Virtual CAN") interface
configuration.
GenericReceiveOffload=, LargeReceiveOffload= options in the
[Link] section of .link files.
- Spanning Tree Protocol enablement, Priority, Aging Time, and the
- Default Port VLAN ID can be configured for bridge devices using the
- new STP=, Priority=, AgeingTimeSec=, and DefaultPVID= settings in the
- [Bridge] section of .netdev files.
+ * The Spanning Tree Protocol, Priority, Aging Time, and the Default
+ Port VLAN ID can be configured for bridge devices using the new STP=,
+ Priority=, AgeingTimeSec=, and DefaultPVID= settings in the [Bridge]
+ section of .netdev files.
- The route table to which routes received over DHCP or RA should be
+ * The route table to which routes received over DHCP or RA should be
added can be configured with the new RouteTable= option in the [DHCP]
and [IPv6AcceptRA] sections of .network files.
- Address Resolution Protocol can be disabled on links managed by
+ * The Address Resolution Protocol can be disabled on links managed by
systemd-networkd using the ARP=no setting in the [Link] section of
.network files.
- * $SERVICE_RESULT, $EXIT_CODE, $EXIT_STATUS are set for ExecStop= and
- ExecStopPost= commands.
+ * New environment variables $SERVICE_RESULT, $EXIT_CODE and
+ $EXIT_STATUS are set for ExecStop= and ExecStopPost= commands, and
+ encode information about the result and exit codes of the current
+ service runtime cycle.
* systemd-sysctl will now configure kernel parameters in the order
they occur in the configuration files. This matches what sysctl
$SYSTEMD_NSPAWN_SHARE_NS_UTS may be used to control the unsharing of
individual namespaces.
+ * "machinectl list" now shows the IP address of running containers in
+ the output, as well as OS release information.
+
+ * "loginctl list" now shows the TTY of each session in the output.
+
+ * sd-bus gained new API calls sd_bus_track_set_recursive(),
+ sd_bus_track_get_recursive(), sd_bus_track_count_name(),
+ sd_bus_track_count_sender(). They permit usage of sd_bus_track peer
+ tracking objects in a "recursive" mode, where a single client can be
+ counted multiple times, if it takes multiple references.
+
+ * sd-bus gained new API calls sd_bus_set_exit_on_disconnect() and
+ sd_bus_get_exit_on_disconnect(). They may be used to to make a
+ process using sd-bus automatically exit if the bus connection is
+ severed.
+
+ * Bus clients of the service manager may now "pin" loaded units into
+ memory, by taking an explicit reference on them. This is useful to
+ ensure the client can retrieve runtime data about the service even
+ after the service completed execution. Taking such a reference is
+ available only for privileged clients and should be helpful to watch
+ running services in a race-free manner, and in particular collect
+ information about exit statuses and results.
+
+ * The nss-resolve module has been changed to strictly return UNAVAIL
+ when communication via D-Bus with resolved failed, and NOTFOUND when
+ a lookup completed but was negative. This means it is now possible to
+ neatly configure fallbacks using nsswitch.conf result checking
+ expressions. Taking benefit of this, the new recommended
+ configuration line for the "hosts" entry in /etc/nsswitch.conf is:
+
+ hosts: files mymachines resolve [!UNAVAIL=return] dns myhostname
+
+ * A new setting CtrlAltDelBurstAction= has been added to
+ /etc/systemd/system.conf which may be used to configure the precise
+ behaviour if the user on the console presses Ctrl-Alt-Del more often
+ than 7 times in 2s. Previously this would unconditionally result in
+ an expedited, immediate reboot. With this new setting the precise
+ operation may be configured in more detail, and also turned off
+ entirely.
+
+ * In .netdev files two new settings RemoteChecksumTx= and
+ RemoteChecksumRx= are now understood that permit configuring the
+ remote checksumming logic for VXLAN networks.
+
+ * The service manager learnt a new "invocation ID" concept for invoked
+ services. Each runtime cycle of a service will get a new invocation
+ ID (a 128bit random UUID) assigned that identifies the current
+ run of the service uniquely and globally. A new invocation ID
+ is generated each time a service starts up. The journal will store
+ the invocation ID of a service along with any logged messages, thus
+ making the invocation ID useful for matching the online runtime of a
+ service with the offline log data it generated in a safe way without
+ relying on synchronized timestamps. In many ways this new service
+ invocation ID concept is similar to the kernel's boot ID concept that
+ uniquely and globally identifies the runtime of each boot. The
+ invocation ID of a service is passed to the service itself via an
+ environment variable ($INVOCATION_ID). A new bus call
+ GetUnitByInvocationID() has been added that is similar to GetUnit()
+ but instead of retrieving the bus path for a unit by its name
+ retrieves it by its invocation ID. The returned path is valid only as
+ long as the passed invocation ID is current.
+
+ * systemd-resolved gained a new "DNSStubListener" setting in
+ resolved.conf. It either takes a boolean value or the special values
+ "udp" and "tcp", and configures whether to enable the stub DNS
+ listener on 127.0.0.53:53.
+
+ * IP addresses configured via networkd may now carry additional
+ configuration settings supported by the kernel. New options include:
+ HomeAddress=, DuplicateAddressDetection=, ManageTemporaryAddress=,
+ PrefixRoute=, AutoJoin=.
+
+ * The PAM configuration fragment file for "user@.service" shipped with
+ systemd (i.e. the --user instance of systemd) has been stripped to
+ the minimum necessary to make the system boot. Previously, it
+ contained Fedora-specific stanzas that did not apply to other
+ distributions. It is expected that downstream distributions add
+ additional configuration lines, matching their needs to this file,
+ using it only as rough template of what systemd itself needs. Note
+ that this reduced fragment does not even include an invocation of
+ pam_limits which most distributions probably want to add, even though
+ systemd itself does not need it. (There's also the new build time
+ option --with-pamconfdir=no to disable installation of the PAM
+ fragment entirely.)
+
+ * If PrivateDevices=yes is set for a service the CAP_SYS_RAWIO
+ capability is now also dropped from its set (in addition to
+ CAP_SYS_MKNOD as before).
+
+ * In service unit files it is now possible to connect a specific named
+ file descriptor with stdin/stdout/stdout of an executed service. The
+ name may be specified in matching .socket units using the
+ FileDescriptorName= setting.
+
+ * A number of journal settings may now be configured on the kernel
+ command line. Specifically, the following options are now understood:
+ systemd.journald.max_level_console=,
+ systemd.journald.max_level_store=,
+ systemd.journald.max_level_syslog=, systemd.journald.max_level_kmsg=,
+ systemd.journald.max_level_wall=.
+
+ * "systemctl is-enabled --full" will now show by which symlinks a unit
+ file is enabled in the unit dependency tree.
+
+ * Support for VeraCrypt encrypted partitions has been added to the
+ "cryptsetup" logic and /etc/crypttab.
+
+ * systemd-detect-virt gained support for a new --private-users switch
+ that checks whether the invoking processes are running inside a user
+ namespace. Similar, a new special value "private-users" for the
+ existing ConditionVirtualization= setting has been added, permitting
+ skipping of specific units in user namespace environments.
+
+ Contributions from: Alban Crequy, Alexander Kuleshov, Alfie John,
+ Andreas Henriksson, Andrew Jeddeloh, Balázs Úr, Bart Rulon, Benjamin
+ Richter, Ben Gamari, Ben Harris, Brian J. Murrell, Christian Brauner,
+ Christian Rebischke, Clinton Roy, Colin Walters, Cristian Rodríguez,
+ Daniel Hahler, Daniel Mack, Daniel Maixner, Daniel Rusek, Dan Dedrick,
+ Davide Cavalca, David Herrmann, David Michael, Dennis Wassenberg,
+ Djalal Harouni, Dongsu Park, Douglas Christman, Elias Probst, Eric
+ Cook, Erik Karlsson, Evgeny Vereshchagin, Felipe Sateler, Felix Zhang,
+ Franck Bui, George Hilliard, Giuseppe Scrivano, HATAYAMA Daisuke,
+ Heikki Kemppainen, Hendrik Brueckner, hi117, Ismo Puustinen, Ivan
+ Shapovalov, Jakub Filak, Jakub Wilk, Jan Synacek, Jason Kölker,
+ Jean-Sébastien Bour, Jiří Pírko, Jonathan Boulle, Jorge Niedbalski,
+ Keith Busch, kristbaum, Kyle Russell, Lans Zhang, Lennart Poettering,
+ Leonardo Brondani Schenkel, Lucas Werkmeister, Luca Bruno, Lukáš
+ Nykrýn, Maciek Borzecki, Mantas Mikulėnas, Marc-Antoine Perennou,
+ Marcel Holtmann, Marcos Mello, Martin Ejdestig, Martin Pitt, Matej
+ Habrnal, Maxime de Roucy, Michael Biebl, Michael Chapman, Michael Hoy,
+ Michael Olbrich, Michael Pope, Michal Sekletar, Michal Soltys, Mike
+ Gilbert, Nick Owens, Patrik Flykt, Paweł Szewczyk, Peter Hutterer,
+ Piotr Drąg, Reid Price, Richard W.M. Jones, Roman Stingler, Ronny
+ Chevalier, Seraphime Kirkovski, Stefan Schweter, Steve Muir, Susant
+ Sahani, Tejun Heo, Thomas Blume, Thomas H. P. Andersen, Tiago Levit,
+ Tobias Jungel, Tomáš Janoušek, Topi Miettinen, Torstein Husebø, Umut
+ Tezduyar Lindskog, Vito Caputo, WaLyong Cho, Wilhelm Schuster, Yann
+ E. MORIN, Yi EungJun, Yuki Inoguchi, Yu Watanabe, Zbigniew
+ Jędrzejewski-Szmek, Zeal Jagannatha
+
+ — Santa Fe, 2016-11-03
+
CHANGES WITH 231:
* In service units the various ExecXYZ= settings have been extended
files.
* systemd now provides a way to store file descriptors
- per-service in PID 1.This is useful for daemons to ensure
+ per-service in PID 1. This is useful for daemons to ensure
that fds they require are not lost during a daemon
restart. The fds are passed to the daemon on the next
invocation in the same way socket activation fds are
projects / thirdparty / systemd.git / blobdiff