systemd System and Service Manager
-CHANGES WITH 233 in spe
+CHANGES WITH 236:
+
+ * The modprobe.d/ drop-in for the bonding.ko kernel module introduced
+ in v235 has been extended to also set the dummy.ko module option
+ numdummies=0, preventing the kernel from automatically creating
+ dummy0. All dummy interfaces must now be explicitly created.
+
+ * Unknown '%' specifiers in configuration files are now rejected. This
+ applies to units and tmpfiles.d configuration. Any percent characters
+ that are followed by a letter or digit that are not supposed to be
+ interpreted as the beginning of a specifier should be escaped by
+ doubling ("%%"). (So "size=5%" is still accepted, as well as
+ "size=5%,foo=bar", but not "LABEL=x%y%z" since %y and %z are not
+ valid specifiers today.)
+
+ * systemd-resolved now maintains a new dynamic
+ /run/systemd/resolve/stub-resolv.conf compatibility file. It is
+ recommended to make /etc/resolv.conf a symlink to it. This file
+ points at the systemd-resolved stub DNS 127.0.0.53 resolver and
+ includes dynamically acquired search domains, achieving more correct
+ DNS resolution by software that bypasses local DNS APIs such as NSS.
+
+ * The "uaccess" udev tag has been dropped from /dev/kvm and
+ /dev/dri/renderD*. These devices now have the 0666 permissions by
+ default (but this may be changed at build-time). /dev/dri/renderD*
+ will now be owned by the "render" group along with /dev/kfd.
+
+ * "DynamicUser=yes" has been enabled for systemd-timesyncd.service,
+ systemd-journal-gatewayd.service and
+ systemd-journal-upload.service. This means "nss-systemd" must be
+ enabled in /etc/nsswitch.conf to ensure the UIDs assigned to these
+ services are resolved properly.
+
+ * In /etc/fstab two new mount options are now understood:
+ x-systemd.makefs and x-systemd.growfs. The former has the effect that
+ the configured file system is formatted before it is mounted, the
+ latter that the file system is resized to the full block device size
+ after it is mounted (i.e. if the file system is smaller than the
+ partition it resides on, it's grown). This is similar to the fsck
+ logic in /etc/fstab, and pulls in systemd-makefs@.service and
+ systemd-growfs@.service as necessary, similar to
+ systemd-fsck@.service. Resizing is currently only supported on ext4
+ and btrfs.
+
+ * In systemd-networkd, the IPv6 RA logic now optionally may announce
+ DNS server and domain information.
+
+ * Support for the LUKS2 on-disk format for encrypted partitions has
+ been added. This requires libcryptsetup2 during compilation and
+ runtime.
+
+ * The systemd --user instance will now signal "readiness" when its
+ basic.target unit has been reached, instead of when the run queue ran
+ empty for the first time.
+
+ * Tmpfiles.d with user configuration are now also supported.
+ systemd-tmpfiles gained a new --user switch, and snippets placed in
+ ~/.config/user-tmpfiles.d/ and corresponding directories will be
+ executed by systemd-tmpfiles --user running in the new
+ systemd-tmpfiles-setup.service and systemd-tmpfiles-clean.service
+ running in the user session.
+
+ * Unit files and tmpfiles.d snippets learnt three new % specifiers:
+ %S resolves to the top-level state directory (/var/lib for the system
+ instance, $XDG_CONFIG_HOME for the user instance), %C resolves to the
+ top-level cache directory (/var/cache for the system instance,
+ $XDG_CACHE_HOME for the user instance), %L resolves to the top-level
+ logs directory (/var/log for the system instance,
+ $XDG_CONFIG_HOME/log/ for the user instance). This matches the
+ existing %t specifier, that resolves to the top-level runtime
+ directory (/run for the system instance, and $XDG_RUNTIME_DIR for the
+ user instance).
+
+ * journalctl learnt a new parameter --output-fields= for limiting the
+ set of journal fields to output in verbose and JSON output modes.
+
+ * systemd-timesyncd's configuration file gained a new option
+ RootDistanceMaxSec= for setting the maximum root distance of servers
+ it'll use, as well as the new options PollIntervalMinSec= and
+ PollIntervalMaxSec= to tweak the minimum and maximum poll interval.
+
+ * bootctl gained a new command "list" for listing all available boot
+ menu items on systems that follow the boot loader specification.
+
+ * systemctl gained a new --dry-run switch that shows what would be done
+ instead of doing it, and is currently supported by the shutdown and
+ sleep verbs.
+
+ * ConditionSecurity= can now detect the TOMOYO security module.
+
+ * Unit file [Install] sections are now also respected in unit drop-in
+ files. This is intended to be used by drop-ins under /usr/lib/.
+
+ * systemd-firstboot may now also set the initial keyboard mapping.
+
+ * Udev "changed" events for devices which are exposed as systemd
+ .device units are now propagated to units specified in
+ ReloadPropagatedFrom= as reload requests.
+
+ * If a udev device has a SYSTEMD_WANTS= property containing a systemd
+ unit template name (i.e. a name in the form of 'foobar@.service',
+ without the instance component between the '@' and - the '.'), then
+ the escaped sysfs path of the device is automatically used as the
+ instance.
+
+ * SystemCallFilter= in unit files has been extended so that an "errno"
+ can be specified individually for each system call. Example:
+ SystemCallFilter=~uname:EILSEQ.
+
+ * The cgroup delegation logic has been substantially updated. Delegate=
+ now optionally takes a list of controllers (instead of a boolean, as
+ before), which lists the controllers to delegate at least.
+
+ * The networkd DHCPv6 client now implements the FQDN option (RFC 4704).
+
+ * A new LogLevelMax= setting configures the maximum log level any
+ process of the service may log at (i.e. anything with a lesser
+ priority than what is specified is automatically dropped). A new
+ LogExtraFields= setting allows configuration of additional journal
+ fields to attach to all log records generated by any of the unit's
+ processes.
+
+ * New StandardInputData= and StandardInputText= settings along with the
+ new option StandardInput=data may be used to configure textual or
+ binary data that shall be passed to the executed service process via
+ standard input, encoded in-line in the unit file.
+
+ * StandardInput=, StandardOutput= and StandardError= may now be used to
+ connect stdin/stdout/stderr of executed processes directly with a
+ file or AF_UNIX socket in the file system, using the new "file:" option.
+
+ * A new unit file option CollectMode= has been added, that allows
+ tweaking the garbage collection logic for units. It may be used to
+ tell systemd to garbage collect units that have failed automatically
+ (normally it only GCs units that exited successfully). systemd-run
+ and systemd-mount expose this new functionality with a new -G option.
+
+ * "machinectl bind" may now be used to bind mount non-directories
+ (i.e. regularfiles, devices, fifos, sockets).
+
+ * systemd-analyze gained a new verb "calendar" for validating and
+ testing calendar time specifications to use for OnCalendar= in timer
+ units. Besides validating the expression it will calculate the next
+ time the specified expression would elapse.
+
+ * In addition to the pre-existing FailureAction= unit file setting
+ there's now SuccessAction=, for configuring a shutdown action to
+ execute when a unit completes successfully. This is useful in
+ particular inside containers that shall terminate after some workload
+ has been completed. Also, both options are now supported for all unit
+ types, not just services.
+
+ * networkds's IP rule support gained two new options
+ IncomingInterface= and OutgoingInterface= for configuring the incoming
+ and outgoing interfaces of configured rules. systemd-networkd also
+ gained support for "vxcan" network devices.
+
+ * networkd gained a new setting RequiredForOnline=, taking a
+ boolean. If set, systemd-wait-online will take it into consideration
+ when determining that the system is up, otherwise it will ignore the
+ interface for this purpose.
+
+ * The sd_notify() protocol gained support for a new operation: with
+ FDSTOREREMOVE=1 file descriptors may be removed from the per-service
+ store again, ahead of POLLHUP or POLLERR when they are removed
+ anyway.
+
+ * A new document UIDS-GIDS.md has been added to the source tree, that
+ documents the UID/GID range and assignment assumptions and
+ requirements of systemd.
+
+ * The watchdog device PID 1 will ping may now be configured through the
+ WatchdogDevice= configuration file setting, or by setting the
+ systemd.watchdog_service= kernel commandline option.
+
+ * systemd-resolved's gained support for registering DNS-SD services on
+ the local network using MulticastDNS. Services may either be
+ registered by dropping in a .dnssd file in /etc/systemd/dnssd/ (or
+ the same dir below /run, /usr/lib), or through its D-Bus API.
+
+ * The sd_notify() protocol can now with EXTEND_TIMEOUT_USEC=microsecond
+ extend the effective start, runtime, and stop time. The service must
+ continue to send EXTEND_TIMEOUT_USEC within the period specified to
+ prevent the service manager from making the service as timedout.
+
+ * systemd-resolved's DNSSEC support gained support for RFC 8080
+ (Ed25519 keys and signatures).
+
+ * The systemd-resolve command line tool gained a new set of options
+ --set-dns=, --set-domain=, --set-llmnr=, --set-mdns=, --set-dnssec=,
+ --set-nta= and --revert to configure per-interface DNS configuration
+ dynamically during runtime. It's useful for pushing DNS information
+ into systemd-resolved from DNS hook scripts that various interface
+ managing software supports (such as pppd).
+
+ * systemd-nspawn gained a new --network-namespace-path= command line
+ option, which may be used to make a container join an existing
+ network namespace, by specifying a path to a "netns" file.
+
+ Contributions from: Alan Jenkins, Alan Robertson, Alessandro Ghedini,
+ Andrew Jeddeloh, Antonio Rojas, Ari, asavah, bleep_blop, Carsten
+ Strotmann, Christian Brauner, Christian Hesse, Clinton Roy, Collin
+ Eggert, Cong Wang, Daniel Black, Daniel Lockyer, Daniel Rusek, Dimitri
+ John Ledkov, Dmitry Rozhkov, Dongsu Park, Edward A. James, Evgeny
+ Vereshchagin, Florian Klink, Franck Bui, Gwendal Grignou, Hans de
+ Goede, Harald Hoyer, Hristo Venev, Iago López Galeiras, Ikey Doherty,
+ Jakub Wilk, Jérémy Rosen, Jiahui Xie, John Lin, José Bollo, Josef
+ Andersson, juga0, Krzysztof Nowicki, Kyle Walker, Lars Karlitski, Lars
+ Kellogg-Stedman, Lauri Tirkkonen, Lennart Poettering, Lubomir Rintel,
+ Luca Bruno, Lucas Werkmeister, Lukáš Nykrýn, Lukáš Říha, Lukasz
+ Rubaszewski, Maciej S. Szmigiero, Mantas Mikulėnas, Marcus Folkesson,
+ Martin Steuer, Mathieu Trudel-Lapierre, Matija Skala,
+ Matthias-Christian Ott, Max Resch, Michael Biebl, Michael Vogt, Michal
+ Koutný, Michal Sekletar, Mike Gilbert, Muhammet Kara, Neil Brown, Olaf
+ Hering, Ondrej Kozina, Patrik Flykt, Patryk Kocielnik, Peter Hutterer,
+ Piotr Drąg, Razvan Cojocaru, Robin McCorkell, Roland Hieber, Saran
+ Tunyasuvunakool, Sergey Ptashnick, Shawn Landden, Shuang Liu, Simon
+ Arlott, Simon Peeters, Stanislav Angelovič, Stefan Agner, Susant
+ Sahani, Sylvain Plantefève, Thomas Blume, Thomas Haller, Tiago Salem
+ Herrmann, Tinu Weber, Tom Stellard, Topi Miettinen, Torsten Hilbrich,
+ Vito Caputo, Vladislav Vishnyakov, WaLyong Cho, Yu Watanabe, Zbigniew
+ Jędrzejewski-Szmek, Zeal Jagannatha
+
+ — Berlin, 2017-12-14
+
+CHANGES WITH 235:
+
+ * INCOMPATIBILITY: systemd-logind.service and other long-running
+ services now run inside an IPv4/IPv6 sandbox, prohibiting them any IP
+ communication with the outside. This generally improves security of
+ the system, and is in almost all cases a safe and good choice, as
+ these services do not and should not provide any network-facing
+ functionality. However, systemd-logind uses the glibc NSS API to
+ query the user database. This creates problems on systems where NSS
+ is set up to directly consult network services for user database
+ lookups. In particular, this creates incompatibilities with the
+ "nss-nis" module, which attempts to directly contact the NIS/YP
+ network servers it is configured for, and will now consistently
+ fail. In such cases, it is possible to turn off IP sandboxing for
+ systemd-logind.service (set IPAddressDeny= in its [Service] section
+ to the empty string, via a .d/ unit file drop-in). Downstream
+ distributions might want to update their nss-nis packaging to include
+ such a drop-in snippet, accordingly, to hide this incompatibility
+ from the user. Another option is to make use of glibc's nscd service
+ to proxy such network requests through a privilege-separated, minimal
+ local caching daemon, or to switch to more modern technologies such
+ sssd, whose NSS hook-ups generally do not involve direct network
+ access. In general, we think it's definitely time to question the
+ implementation choices of nss-nis, i.e. whether it's a good idea
+ today to embed a network-facing loadable module into all local
+ processes that need to query the user database, including the most
+ trivial and benign ones, such as "ls". For more details about
+ IPAddressDeny= see below.
+
+ * A new modprobe.d drop-in is now shipped by default that sets the
+ bonding module option max_bonds=0. This overrides the kernel default,
+ to avoid conflicts and ambiguity as to whether or not bond0 should be
+ managed by systemd-networkd or not. This resolves multiple issues
+ with bond0 properties not being applied, when bond0 is configured
+ with systemd-networkd. Distributors may choose to not package this,
+ however in that case users will be prevented from correctly managing
+ bond0 interface using systemd-networkd.
+
+ * systemd-analyze gained new verbs "get-log-level" and "get-log-target"
+ which print the logging level and target of the system manager. They
+ complement the existing "set-log-level" and "set-log-target" verbs
+ used to change those values.
+
+ * journald.conf gained a new boolean setting ReadKMsg= which defaults
+ to on. If turned off kernel log messages will not be read by
+ systemd-journald or included in the logs. It also gained a new
+ setting LineMax= for configuring the maximum line length in
+ STDOUT/STDERR log streams. The new default for this value is 48K, up
+ from the previous hardcoded 2048.
+
+ * A new unit setting RuntimeDirectoryPreserve= has been added, which
+ allows more detailed control of what to do with a runtime directory
+ configured with RuntimeDirectory= (i.e. a directory below /run or
+ $XDG_RUNTIME_DIR) after a unit is stopped.
+
+ * The RuntimeDirectory= setting for units gained support for creating
+ deeper subdirectories below /run or $XDG_RUNTIME_DIR, instead of just
+ one top-level directory.
+
+ * Units gained new options StateDirectory=, CacheDirectory=,
+ LogsDirectory= and ConfigurationDirectory= which are closely related
+ to RuntimeDirectory= but manage per-service directories below
+ /var/lib, /var/cache, /var/log and /etc. By making use of them it is
+ possible to write unit files which when activated automatically gain
+ properly owned service specific directories in these locations, thus
+ making unit files self-contained and increasing compatibility with
+ stateless systems and factory reset where /etc or /var are
+ unpopulated at boot. Matching these new settings there's also
+ StateDirectoryMode=, CacheDirectoryMode=, LogsDirectoryMode=,
+ ConfigurationDirectoryMode= for configuring the access mode of these
+ directories. These settings are particularly useful in combination
+ with DynamicUser=yes as they provide secure, properly-owned,
+ writable, and stateful locations for storage, excluded from the
+ sandbox that such services live in otherwise.
+
+ * Automake support has been removed from this release. systemd is now
+ Meson-only.
+
+ * systemd-journald will now aggressively cache client metadata during
+ runtime, speeding up log write performance under pressure. This comes
+ at a small price though: as much of the metadata is read
+ asynchronously from /proc/ (and isn't implicitly attached to log
+ datagrams by the kernel, like UID/GID/PID/SELinux are) this means the
+ metadata stored alongside a log entry might be slightly
+ out-of-date. Previously it could only be slightly newer than the log
+ message. The time window is small however, and given that the kernel
+ is unlikely to be improved anytime soon in this regard, this appears
+ acceptable to us.
+
+ * nss-myhostname/systemd-resolved will now by default synthesize an
+ A/AAAA resource record for the "_gateway" hostname, pointing to the
+ current default IP gateway. Previously it did that for the "gateway"
+ name, hampering adoption, as some distributions wanted to leave that
+ host name open for local use. The old behaviour may still be
+ requested at build time.
+
+ * systemd-networkd's [Address] section in .network files gained a new
+ Scope= setting for configuring the IP address scope. The [Network]
+ section gained a new boolean setting ConfigureWithoutCarrier= that
+ tells systemd-networkd to ignore link sensing when configuring the
+ device. The [DHCP] section gained a new Anonymize= boolean option for
+ turning on a number of options suggested in RFC 7844. A new
+ [RoutingPolicyRule] section has been added for configuring the IP
+ routing policy. The [Route] section has gained support for a new
+ Type= setting which permits configuring
+ blackhole/unreachable/prohibit routes.
+
+ * The [VRF] section in .netdev files gained a new Table= setting for
+ configuring the routing table to use. The [Tunnel] section gained a
+ new Independent= boolean field for configuring tunnels independent of
+ an underlying network interface. The [Bridge] section gained a new
+ GroupForwardMask= option for configuration of propagation of link
+ local frames between bridge ports.
+
+ * The WakeOnLan= setting in .link files gained support for a number of
+ new modes. A new TCP6SegmentationOffload= setting has been added for
+ configuring TCP/IPv6 hardware segmentation offload.
+
+ * The IPv6 RA sender implementation may now optionally send out RDNSS
+ and RDNSSL records to supply DNS configuration to peers.
+
+ * systemd-nspawn gained support for a new --system-call-filter= command
+ line option for adding and removing entries in the default system
+ call filter it applies. Moreover systemd-nspawn has been changed to
+ implement a system call whitelist instead of a blacklist.
+
+ * systemd-run gained support for a new --pipe command line option. If
+ used the STDIN/STDOUT/STDERR file descriptors passed to systemd-run
+ are directly passed on to the activated transient service
+ executable. This allows invoking arbitrary processes as systemd
+ services (for example to take benefit of dependency management,
+ accounting management, resource management or log management that is
+ done automatically for services) — while still allowing them to be
+ integrated in a classic UNIX shell pipeline.
+
+ * When a service sends RELOAD=1 via sd_notify() and reload propagation
+ using ReloadPropagationTo= is configured, a reload is now propagated
+ to configured units. (Previously this was only done on explicitly
+ requested reloads, using "systemctl reload" or an equivalent
+ command.)
+
+ * For each service unit a restart counter is now kept: it is increased
+ each time the service is restarted due to Restart=, and may be
+ queried using "systemctl show -p NRestarts …".
+
+ * New system call filter groups @aio, @sync, @chown, @setuid, @memlock,
+ @signal and @timer have been added, for usage with SystemCallFilter=
+ in unit files and the new --system-call-filter= command line option
+ of systemd-nspawn (see above).
+
+ * ExecStart= lines in unit files gained two new modifiers: when a
+ command line is prefixed with "!" the command will be executed as
+ configured, except for the credentials applied by
+ setuid()/setgid()/setgroups(). It is very similar to the pre-existing
+ "+", but does still apply namespacing options unlike "+". There's
+ also "!!" now, which is mostly identical, but becomes a NOP on
+ systems that support ambient capabilities. This is useful to write
+ unit files that work with ambient capabilities where possible but
+ automatically fall back to traditional privilege dropping mechanisms
+ on systems where this is not supported.
+
+ * ListenNetlink= settings in socket units now support RDMA netlink
+ sockets.
+
+ * A new unit file setting LockPersonality= has been added which permits
+ locking down the chosen execution domain ("personality") of a service
+ during runtime.
+
+ * A new special target "getty-pre.target" has been added, which is
+ ordered before all text logins, and may be used to order services
+ before textual logins acquire access to the console.
+
+ * systemd will now attempt to load the virtio-rng.ko kernel module very
+ early on if a VM environment supporting this is detected. This should
+ improve entropy during early boot in virtualized environments.
+
+ * A _netdev option is now supported in /etc/crypttab that operates in a
+ similar way as the same option in /etc/fstab: it permits configuring
+ encrypted devices that need to be ordered after the network is up.
+ Following this logic, two new special targets
+ remote-cryptsetup-pre.target and remote-cryptsetup.target have been
+ added that are to cryptsetup.target what remote-fs.target and
+ remote-fs-pre.target are to local-fs.target.
+
+ * Service units gained a new UnsetEnvironment= setting which permits
+ unsetting specific environment variables for services that are
+ normally passed to it (for example in order to mask out locale
+ settings for specific services that can't deal with it).
+
+ * Units acquired a new boolean option IPAccounting=. When turned on, IP
+ traffic accounting (packet count as well as byte count) is done for
+ the service, and shown as part of "systemctl status" or "systemd-run
+ --wait".
+
+ * Service units acquired two new options IPAddressAllow= and
+ IPAddressDeny=, taking a list of IPv4 or IPv6 addresses and masks,
+ for configuring a simple IP access control list for all sockets of
+ the unit. These options are available also on .slice and .socket
+ units, permitting flexible access list configuration for individual
+ services as well as groups of services (as defined by a slice unit),
+ including system-wide. Note that IP ACLs configured this way are
+ enforced on every single IPv4 and IPv6 socket created by any process
+ of the service unit, and apply to ingress as well as egress traffic.
+
+ * If CPUAccounting= or IPAccounting= is turned on for a unit a new
+ structured log message is generated each time the unit is stopped,
+ containing information about the consumed resources of this
+ invocation.
+
+ * A new setting KeyringMode= has been added to unit files, which may be
+ used to control how the kernel keyring is set up for executed
+ processes.
+
+ * "systemctl poweroff", "systemctl reboot", "systemctl halt",
+ "systemctl kexec" and "systemctl exit" are now always asynchronous in
+ behaviour (that is: these commands return immediately after the
+ operation was enqueued instead of waiting for the operation to
+ complete). Previously, "systemctl poweroff" and "systemctl reboot"
+ were asynchronous on systems using systemd-logind (i.e. almost
+ always, and like they were on sysvinit), and the other three commands
+ were unconditionally synchronous. With this release this is cleaned
+ up, and callers will see the same asynchronous behaviour on all
+ systems for all five operations.
+
+ * systemd-logind gained new Halt() and CanHalt() bus calls for halting
+ the system.
+
+ * .timer units now accept calendar specifications in other timezones
+ than UTC or the local timezone.
+
+ * The tmpfiles snippet var.conf has been changed to create
+ /var/log/btmp with access mode 0660 instead of 0600. It was owned by
+ the "utmp" group already, and it appears to be generally understood
+ that members of "utmp" can modify/flush the utmp/wtmp/lastlog/btmp
+ databases. Previously this was implemented correctly for all these
+ databases excepts btmp, which has been opened up like this now
+ too. Note that while the other databases are world-readable
+ (i.e. 0644), btmp is not and remains more restrictive.
+
+ * The systemd-resolve tool gained a new --reset-server-features
+ switch. When invoked like this systemd-resolved will forget
+ everything it learnt about the features supported by the configured
+ upstream DNS servers, and restarts the feature probing logic on the
+ next resolver look-up for them at the highest feature level
+ again.
+
+ * The status dump systemd-resolved sends to the logs upon receiving
+ SIGUSR1 now also includes information about all DNS servers it is
+ configured to use, and the features levels it probed for them.
+
+ Contributions from: Abdó Roig-Maranges, Alan Jenkins, Alexander
+ Kuleshov, Andreas Rammhold, Andrew Jeddeloh, Andrew Soutar, Ansgar
+ Burchardt, Beniamino Galvani, Benjamin Berg, Benjamin Robin, Charles
+ Huber, Christian Hesse, Daniel Berrange, Daniel Kahn Gillmor, Daniel
+ Mack, Daniel Rusek, Daniel Șerbănescu, Davide Cavalca, Dimitri John
+ Ledkov, Diogo Pereira, Djalal Harouni, Dmitriy Geels, Dmitry Torokhov,
+ ettavolt, Evgeny Vereshchagin, Fabio Kung, Felipe Sateler, Franck Bui,
+ Hans de Goede, Harald Hoyer, Insun Pyo, Ivan Kurnosov, Ivan Shapovalov,
+ Jakub Wilk, Jan Synacek, Jason Gunthorpe, Jeremy Bicha, Jérémy Rosen,
+ John Lin, jonasBoss, Jonathan Lebon, Jonathan Teh, Jon Ringle, Jörg
+ Thalheim, Jouke Witteveen, juga0, Justin Capella, Justin Michaud,
+ Kai-Heng Feng, Lennart Poettering, Lion Yang, Luca Bruno, Lucas
+ Werkmeister, Lukáš Nykrýn, Marcel Hollerbach, Marcus Lundblad, Martin
+ Pitt, Michael Biebl, Michael Grzeschik, Michal Sekletar, Mike Gilbert,
+ Neil Brown, Nicolas Iooss, Patrik Flykt, pEJipE, Piotr Drąg, Russell
+ Stuart, S. Fan, Shengyao Xue, Stefan Pietsch, Susant Sahani, Tejun Heo,
+ Thomas Miller, Thomas Sailer, Tobias Hunger, Tomasz Pala, Tom
+ Gundersen, Tommi Rantala, Topi Miettinen, Torstein Husebø, userwithuid,
+ Vasilis Liaskovitis, Vito Caputo, WaLyong Cho, William Douglas, Xiang
+ Fan, Yu Watanabe, Zbigniew Jędrzejewski-Szmek
+
+ — Berlin, 2017-10-06
+
+CHANGES WITH 234:
+
+ * Meson is now supported as build system in addition to Automake. It is
+ our plan to remove Automake in one of our next releases, so that
+ Meson becomes our exclusive build system. Hence, please start using
+ the Meson build system in your downstream packaging. There's plenty
+ of documentation around how to use Meson, the extremely brief
+ summary:
+
+ ./autogen.sh && ./configure && make && sudo make install
+
+ becomes:
+
+ meson build && ninja -C build && sudo ninja -C build install
+
+ * Unit files gained support for a new JobRunningTimeoutUSec= setting,
+ which permits configuring a timeout on the time a job is
+ running. This is particularly useful for setting timeouts on jobs for
+ .device units.
+
+ * Unit files gained two new options ConditionUser= and ConditionGroup=
+ for conditionalizing units based on the identity of the user/group
+ running a systemd user instance.
+
+ * systemd-networkd now understands a new FlowLabel= setting in the
+ [VXLAN] section of .network files, as well as a Priority= in
+ [Bridge], GVRP= + MVRP= + LooseBinding= + ReorderHeader= in [VLAN]
+ and GatewayOnlink= + IPv6Preference= + Protocol= in [Route]. It also
+ gained support for configuration of GENEVE links, and IPv6 address
+ labels. The [Network] section gained the new IPv6ProxyNDP= setting.
+
+ * .link files now understand a new Port= setting.
+
+ * systemd-networkd's DHCP support gained support for DHCP option 119
+ (domain search list).
+
+ * systemd-networkd gained support for serving IPv6 address ranges using
+ the Router Advertisment protocol. The new .network configuration
+ section [IPv6Prefix] may be used to configure the ranges to
+ serve. This is implemented based on a new, minimal, native server
+ implementation of RA.
+
+ * journalctl's --output= switch gained support for a new parameter
+ "short-iso-precise" for a mode where timestamps are shown as precise
+ ISO date values.
+
+ * systemd-udevd's "net_id" builtin may now generate stable network
+ interface names from IBM PowerVM VIO devices as well as ACPI platform
+ devices.
+
+ * MulticastDNS support in systemd-resolved may now be explicitly
+ enabled/disabled using the new MulticastDNS= configuration file
+ option.
+
+ * systemd-resolved may now optionally use libidn2 instead of the libidn
+ for processing internationalized domain names. Support for libidn2
+ should be considered experimental and should not be enabled by
+ default yet.
+
+ * "machinectl pull-tar" and related call may now do verification of
+ downloaded images using SUSE-style .sha256 checksum files in addition
+ to the already existing support for validating using Ubuntu-style
+ SHA256SUMS files.
+
+ * sd-bus gained support for a new sd_bus_message_appendv() call which
+ is va_list equivalent of sd_bus_message_append().
+
+ * sd-boot gained support for validating images using SHIM/MOK.
+
+ * The SMACK code learnt support for "onlycap".
+
+ * systemd-mount --umount is now much smarter in figuring out how to
+ properly unmount a device given its mount or device path.
+
+ * The code to call libnss_dns as a fallback from libnss_resolve when
+ the communication with systemd-resolved fails was removed. This
+ fallback was redundant and interfered with the [!UNAVAIL=return]
+ suffix. See nss-resolve(8) for the recommended configuration.
+
+ * systemd-logind may now be restarted without losing state. It stores
+ the file descriptors for devices it manages in the system manager
+ using the FDSTORE= mechanism. Please note that further changes in
+ other components may be required to make use of this (for example
+ Xorg has code to listen for stops of systemd-logind and terminate
+ itself when logind is stopped or restarted, in order to avoid using
+ stale file descriptors for graphical devices, which is now
+ counterproductive and must be reverted in order for restarts of
+ systemd-logind to be safe. See
+ https://cgit.freedesktop.org/xorg/xserver/commit/?id=dc48bd653c7e101.)
+
+ * All kernel install plugins are called with the environment variable
+ KERNEL_INSTALL_MACHINE_ID which is set to the machine ID given by
+ /etc/machine-id. If the file is missing or empty, the variable is
+ empty and BOOT_DIR_ABS is the path of a temporary directory which is
+ removed after all the plugins exit. So, if KERNEL_INSTALL_MACHINE_ID
+ is empty, all plugins should not put anything in BOOT_DIR_ABS.
+
+ Contributions from: Adrian Heine né Lang, Aggelos Avgerinos, Alexander
+ Kurtz, Alexandros Frantzis, Alexey Brodkin, Alex Lu, Amir Pakdel, Amir
+ Yalon, Anchor Cat, Anthony Parsons, Bastien Nocera, Benjamin Gilbert,
+ Benjamin Robin, Boucman, Charles Plessy, Chris Chiu, Chris Lamb,
+ Christian Brauner, Christian Hesse, Colin Walters, Daniel Drake,
+ Danielle Church, Daniel Molkentin, Daniel Rusek, Daniel Wang, Davide
+ Cavalca, David Herrmann, David Michael, Dax Kelson, Dimitri John
+ Ledkov, Djalal Harouni, Dušan Kazik, Elias Probst, Evgeny Vereshchagin,
+ Federico Di Pierro, Felipe Sateler, Felix Zhang, Franck Bui, Gary
+ Tierney, George McCollister, Giedrius Statkevičius, Hans de Goede,
+ hecke, Hendrik Westerberg, Hristo Venev, Ian Wienand, Insun Pyo, Ivan
+ Shapovalov, James Cowgill, James Hemsing, Janne Heß, Jan Synacek, Jason
+ Reeder, João Paulo Rechi Vita, John Paul Adrian Glaubitz, Jörg
+ Thalheim, Josef Andersson, Josef Gajdusek, Julian Mehne, Kai Krakow,
+ Krzysztof Jackiewicz, Lars Karlitski, Lennart Poettering, Lluís Gili,
+ Lucas Werkmeister, Lukáš Nykrýn, Łukasz Stelmach, Mantas Mikulėnas,
+ Marcin Bachry, Marcus Cooper, Mark Stosberg, Martin Pitt, Matija Skala,
+ Matt Clarkson, Matthew Garrett, Matthias Greiner, Matthijs van Duin,
+ Max Resch, Michael Biebl, Michal Koutný, Michal Sekletar, Michal
+ Soltys, Michal Suchanek, Mike Gilbert, Nate Clark, Nathaniel R. Lewis,
+ Neil Brown, Nikolai Kondrashov, Pascal S. de Kloe, Pat Riehecky, Patrik
+ Flykt, Paul Kocialkowski, Peter Hutterer, Philip Withnall, Piotr
+ Szydełko, Rafael Fontenelle, Ray Strode, Richard Maw, Roelf Wichertjes,
+ Ronny Chevalier, Sarang S. Dalal, Sjoerd Simons, slodki, Stefan
+ Schweter, Susant Sahani, Ted Wood, Thomas Blume, Thomas Haller, Thomas
+ H. P. Andersen, Timothée Ravier, Tobias Jungel, Tobias Stoeckmann, Tom
+ Gundersen, Tom Yan, Torstein Husebø, Umut Tezduyar Lindskog,
+ userwithuid, Vito Caputo, Waldemar Brodkorb, WaLyong Cho, Yu, Li-Yu,
+ Yusuke Nojima, Yu Watanabe, Zbigniew Jędrzejewski-Szmek, Дамјан
+ Георгиевски
+
+ — Berlin, 2017-07-12
+
+CHANGES WITH 233:
+
+ * The "hybrid" control group mode has been modified to improve
+ compatibility with "legacy" cgroups-v1 setups. Specifically, the
+ "hybrid" setup of /sys/fs/cgroup is now pretty much identical to
+ "legacy" (including /sys/fs/cgroup/systemd as "name=systemd" named
+ cgroups-v1 hierarchy), the only externally visible change being that
+ the cgroups-v2 hierarchy is also mounted, to
+ /sys/fs/cgroup/unified. This should provide a large degree of
+ compatibility with "legacy" cgroups-v1, while taking benefit of the
+ better management capabilities of cgroups-v2.
+
+ * The default control group setup mode may be selected both a boot-time
+ via a set of kernel command line parameters (specifically:
+ systemd.unified_cgroup_hierarchy= and
+ systemd.legacy_systemd_cgroup_controller=), as well as a compile-time
+ default selected on the configure command line
+ (--with-default-hierarchy=). The upstream default is "hybrid"
+ (i.e. the cgroups-v1 + cgroups-v2 mixture discussed above) now, but
+ this will change in a future systemd version to be "unified" (pure
+ cgroups-v2 mode). The third option for the compile time option is
+ "legacy", to enter pure cgroups-v1 mode. We recommend downstream
+ distributions to default to "hybrid" mode for release distributions,
+ starting with v233. We recommend "unified" for development
+ distributions (specifically: distributions such as Fedora's rawhide)
+ as that's where things are headed in the long run. Use "legacy" for
+ greatest stability and compatibility only.
+
+ * Note one current limitation of "unified" and "hybrid" control group
+ setup modes: the kernel currently does not permit the systemd --user
+ instance (i.e. unprivileged code) to migrate processes between two
+ disconnected cgroup subtrees, even if both are managed and owned by
+ the user. This effectively means "systemd-run --user --scope" doesn't
+ work when invoked from outside of any "systemd --user" service or
+ scope. Specifically, it is not supported from session scopes. We are
+ working on fixing this in a future systemd version. (See #3388 for
+ further details about this.)
+
+ * DBus policy files are now installed into /usr rather than /etc. Make
+ sure your system has dbus >= 1.9.18 running before upgrading to this
+ version, or override the install path with --with-dbuspolicydir= .
+
+ * All python scripts shipped with systemd (specifically: the various
+ tests written in Python) now require Python 3.
+
+ * systemd unit tests can now run standalone (without the source or
+ build directories), and can be installed into /usr/lib/systemd/tests/
+ with 'make install-tests'.
+
+ * Note that from this version on, CONFIG_CRYPTO_USER_API_HASH,
+ CONFIG_CRYPTO_HMAC and CONFIG_CRYPTO_SHA256 need to be enabled in the
+ kernel.
+
+ * Support for the %c, %r, %R specifiers in unit files has been
+ removed. Specifiers are not supposed to be dependent on configuration
+ in the unit file itself (so that they resolve the same regardless
+ where used in the unit files), but these specifiers were influenced
+ by the Slice= option.
+
+ * The shell invoked by debug-shell.service now defaults to /bin/sh in
+ all cases. If distributions want to use a different shell for this
+ purpose (for example Fedora's /sbin/sushell) they need to specify
+ this explicitly at configure time using --with-debug-shell=.
* The confirmation spawn prompt has been reworked to offer the
following choices:
The 'n' choice for the confirmation spawn prompt has been removed,
because its meaning was confusing.
+ The prompt may now also be redirected to an alternative console by
+ specifying the console as parameter to systemd.confirm_spawn=.
+
+ * Services of Type=notify require a READY=1 notification to be sent
+ during startup. If no such message is sent, the service now fails,
+ even if the main process exited with a successful exit code.
+
+ * Services that fail to start up correctly now always have their
+ ExecStopPost= commands executed. Previously, they'd enter "failed"
+ state directly, without executing these commands.
+
+ * The option MulticastDNS= of network configuration files has acquired
+ an actual implementation. With MulticastDNS=yes a host can resolve
+ names of remote hosts and reply to mDNS A and AAAA requests.
+
+ * When units are about to be started an additional check is now done to
+ ensure that all dependencies of type BindsTo= (when used in
+ combination with After=) have been started.
+
+ * systemd-analyze gained a new verb "syscall-filter" which shows which
+ system call groups are defined for the SystemCallFilter= unit file
+ setting, and which system calls they contain.
+
+ * A new system call filter group "@filesystem" has been added,
+ consisting of various file system related system calls. Group
+ "@reboot" has been added, covering reboot, kexec and shutdown related
+ calls. Finally, group "@swap" has been added covering swap
+ configuration related calls.
+
+ * A new unit file option RestrictNamespaces= has been added that may be
+ used to restrict access to the various process namespace types the
+ Linux kernel provides. Specifically, it may be used to take away the
+ right for a service unit to create additional file system, network,
+ user, and other namespaces. This sandboxing option is particularly
+ relevant due to the high amount of recently discovered namespacing
+ related vulnerabilities in the kernel.
+
+ * systemd-udev's .link files gained support for a new AutoNegotiation=
+ setting for configuring Ethernet auto-negotiation.
+
+ * systemd-networkd's .network files gained support for a new
+ ListenPort= setting in the [DHCP] section to explicitly configure the
+ UDP client port the DHCP client shall listen on.
+
+ * .network files gained a new Unmanaged= boolean setting for explicitly
+ excluding one or more interfaces from management by systemd-networkd.
+
+ * The systemd-networkd ProxyARP= option has been renamed to
+ IPV4ProxyARP=. Similarly, VXLAN-specific option ARPProxy= has been
+ renamed to ReduceARPProxy=. The old names continue to be available
+ for compatibility.
+
+ * systemd-networkd gained support for configuring IPv6 Proxy NDP
+ addresses via the new IPv6ProxyNDPAddress= .network file setting.
+
+ * systemd-networkd's bonding device support gained support for two new
+ configuration options ActiveSlave= and PrimarySlave=.
+
+ * The various options in the [Match] section of .network files gained
+ support for negative matching.
+
+ * New systemd-specific mount options are now understood in /etc/fstab:
+
+ x-systemd.mount-timeout= may be used to configure the maximum
+ permitted runtime of the mount command.
+
+ x-systemd.device-bound may be set to bind a mount point to its
+ backing device unit, in order to automatically remove a mount point
+ if its backing device is unplugged. This option may also be
+ configured through the new SYSTEMD_MOUNT_DEVICE_BOUND udev property
+ on the block device, which is now automatically set for all CDROM
+ drives, so that mounted CDs are automatically unmounted when they are
+ removed from the drive.
+
+ x-systemd.after= and x-systemd.before= may be used to explicitly
+ order a mount after or before another unit or mount point.
+
+ * Enqueued start jobs for device units are now automatically garbage
+ collected if there are no jobs waiting for them anymore.
+
+ * systemctl list-jobs gained two new switches: with --after, for every
+ queued job the jobs it's waiting for are shown; with --before the
+ jobs which it's blocking are shown.
+
+ * systemd-nspawn gained support for ephemeral boots from disk images
+ (or in other words: --ephemeral and --image= may now be
+ combined). Moreover, ephemeral boots are now supported for normal
+ directories, even if the backing file system is not btrfs. Of course,
+ if the file system does not support file system snapshots or
+ reflinks, the initial copy operation will be relatively expensive, but
+ this should still be suitable for many use cases.
+
+ * Calendar time specifications in .timer units now support
+ specifications relative to the end of a month by using "~" instead of
+ "-" as separator between month and day. For example, "*-02~03" means
+ "the third last day in February". In addition a new syntax for
+ repeated events has been added using the "/" character. For example,
+ "9..17/2:00" means "every two hours from 9am to 5pm".
+
+ * systemd-socket-proxyd gained a new parameter --connections-max= for
+ configuring the maximum number of concurrent connections.
+
+ * sd-id128 gained a new API for generating unique IDs for the host in a
+ way that does not leak the machine ID. Specifically,
+ sd_id128_get_machine_app_specific() derives an ID based on the
+ machine ID a in well-defined, non-reversible, stable way. This is
+ useful whenever an identifier for the host is needed but where the
+ identifier shall not be useful to identify the system beyond the
+ scope of the application itself. (Internally this uses HMAC-SHA256 as
+ keyed hash function using the machine ID as input.)
+
+ * NotifyAccess= gained a new supported value "exec". When set
+ notifications are accepted from all processes systemd itself invoked,
+ including all control processes.
+
+ * .nspawn files gained support for defining overlay mounts using the
+ Overlay= and OverlayReadOnly= options. Previously this functionality
+ was only available on the systemd-nspawn command line.
+
+ * systemd-nspawn's --bind= and --overlay= options gained support for
+ bind/overlay mounts whose source lies within the container tree by
+ prefixing the source path with "+".
+
+ * systemd-nspawn's --bind= and --overlay= options gained support for
+ automatically allocating a temporary source directory in /var/tmp
+ that is removed when the container dies. Specifically, if the source
+ directory is specified as empty string this mechanism is selected. An
+ example usage is --overlay=+/var::/var, which creates an overlay
+ mount based on the original /var contained in the image, overlayed
+ with a temporary directory in the host's /var/tmp. This way changes
+ to /var are automatically flushed when the container shuts down.
+
+ * systemd-nspawn --image= option does now permit raw file system block
+ devices (in addition to images containing partition tables, as
+ before).
+
+ * The disk image dissection logic in systemd-nspawn gained support for
+ automatically setting up LUKS encrypted as well as Verity protected
+ partitions. When a container is booted from an encrypted image the
+ passphrase is queried at start-up time. When a container with Verity
+ data is started, the root hash is search in a ".roothash" file
+ accompanying the disk image (alternatively, pass the root hash via
+ the new --root-hash= command line option).
+
+ * A new tool /usr/lib/systemd/systemd-dissect has been added that may
+ be used to dissect disk images the same way as systemd-nspawn does
+ it, following the Bootable Partition Specification. It may even be
+ used to mount disk images with complex partition setups (including
+ LUKS and Verity partitions) to a local host directory, in order to
+ inspect them. This tool is not considered public API (yet), and is
+ thus not installed into /usr/bin. Please do not rely on its
+ existence, since it might go away or be changed in later systemd
+ versions.
+
+ * A new generator "systemd-verity-generator" has been added, similar in
+ style to "systemd-cryptsetup-generator", permitting automatic setup of
+ Verity root partitions when systemd boots up. In order to make use of
+ this your partition setup should follow the Discoverable Partitions
+ Specification, and the GPT partition ID of the root file system
+ partition should be identical to the upper 128bit of the Verity root
+ hash. The GPT partition ID of the Verity partition protecting it
+ should be the lower 128bit of the Verity root hash. If the partition
+ image follows this model it is sufficient to specify a single
+ "roothash=" kernel command line argument to both configure which root
+ image and verity partition to use as well as the root hash for
+ it. Note that systemd-nspawn's Verity support follows the same
+ semantics, meaning that disk images with proper Verity data in place
+ may be booted in containers with systemd-nspawn as well as on
+ physical systems via the verity generator. Also note that the "mkosi"
+ tool available at https://github.com/systemd/mkosi has been updated
+ to generate Verity protected disk images following this scheme. In
+ fact, it has been updated to generate disk images that optionally
+ implement a complete UEFI SecureBoot trust chain, involving a signed
+ kernel and initrd image that incorporates such a root hash as well as
+ a Verity-enabled root partition.
+
+ * The hardware database (hwdb) udev supports has been updated to carry
+ accelerometer quirks.
+
+ * All system services are now run with a fresh kernel keyring set up
+ for them. The invocation ID is stored by default in it, thus
+ providing a safe, non-overridable way to determine the invocation
+ ID of each service.
+
+ * Service unit files gained new BindPaths= and BindReadOnlyPaths=
+ options for bind mounting arbitrary paths in a service-specific
+ way. When these options are used, arbitrary host or service files and
+ directories may be mounted to arbitrary locations in the service's
+ view.
+
+ * Documentation has been added that lists all of systemd's low-level
+ environment variables:
+
+ https://github.com/systemd/systemd/blob/master/ENVIRONMENT.md
+
+ * sd-daemon gained a new API sd_is_socket_sockaddr() for determining
+ whether a specific socket file descriptor matches a specified socket
+ address.
+
+ * systemd-firstboot has been updated to check for the
+ systemd.firstboot= kernel command line option. It accepts a boolean
+ and when set to false the first boot questions are skipped.
+
+ * systemd-fstab-generator has been updated to check for the
+ systemd.volatile= kernel command line option, which either takes an
+ optional boolean parameter or the special value "state". If used the
+ system may be booted in a "volatile" boot mode. Specifically,
+ "systemd.volatile" is used, the root directory will be mounted as
+ tmpfs, and only /usr is mounted from the actual root file system. If
+ "systemd.volatile=state" is used, the root directory will be mounted
+ as usual, but /var is mounted as tmpfs. This concept provides similar
+ functionality as systemd-nspawn's --volatile= option, but provides it
+ on physical boots. Use this option for implementing stateless
+ systems, or testing systems with all state and/or configuration reset
+ to the defaults. (Note though that many distributions are not
+ prepared to boot up without a populated /etc or /var, though.)
+
+ * systemd-gpt-auto-generator gained support for LUKS encrypted root
+ partitions. Previously it only supported LUKS encrypted partitions
+ for all other uses, except for the root partition itself.
+
+ * Socket units gained support for listening on AF_VSOCK sockets for
+ communication in virtualized QEMU environments.
+
+ * The "configure" script gained a new option --with-fallback-hostname=
+ for specifying the fallback hostname to use if none is configured in
+ /etc/hostname. For example, by specifying
+ --with-fallback-hostname=fedora it is possible to default to a
+ hostname of "fedora" on pristine installations.
+
+ * systemd-cgls gained support for a new --unit= switch for listing only
+ the control groups of a specific unit. Similar --user-unit= has been
+ added for listing only the control groups of a specific user unit.
+
+ * systemd-mount gained a new --umount switch for unmounting a mount or
+ automount point (and all mount/automount points below it).
+
+ * systemd will now refuse full configuration reloads (via systemctl
+ daemon-reload and related calls) unless at least 16MiB of free space
+ are available in /run. This is a safety precaution in order to ensure
+ that generators can safely operate after the reload completed.
+
+ * A new unit file option RootImage= has been added, which has a similar
+ effect as RootDirectory= but mounts the service's root directory from
+ a disk image instead of plain directory. This logic reuses the same
+ image dissection and mount logic that systemd-nspawn already uses,
+ and hence supports any disk images systemd-nspawn supports, including
+ those following the Discoverable Partition Specification, as well as
+ Verity enabled images. This option enables systemd to run system
+ services directly off disk images acting as resource bundles,
+ possibly even including full integrity data.
+
+ * A new MountAPIVFS= unit file option has been added, taking a boolean
+ argument. If enabled /proc, /sys and /dev (collectively called the
+ "API VFS") will be mounted for the service. This is only relevant if
+ RootDirectory= or RootImage= is used for the service, as these mounts
+ are of course in place in the host mount namespace anyway.
+
+ * systemd-nspawn gained support for a new --pivot-root= switch. If
+ specified the root directory within the container image is pivoted to
+ the specified mount point, while the original root disk is moved to a
+ different place. This option enables booting of ostree images
+ directly with systemd-nspawn.
+
+ * The systemd build scripts will no longer complain if the NTP server
+ addresses are not changed from the defaults. Google now supports
+ these NTP servers officially. We still recommend downstreams to
+ properly register an NTP pool with the NTP pool project though.
+
+ * coredumpctl gained a new "--reverse" option for printing the list
+ of coredumps in reverse order.
+
+ * coredumpctl will now show additional information about truncated and
+ inaccessible coredumps, as well as coredumps that are still being
+ processed. It also gained a new --quiet switch for suppressing
+ additional informational message in its output.
+
+ * coredumpctl gained support for only showing coredumps newer and/or
+ older than specific timestamps, using the new --since= and --until=
+ options, reminiscent of journalctl's options by the same name.
+
+ * The systemd-coredump logic has been improved so that it may be reused
+ to collect backtraces in non-compiled languages, for example in
+ scripting languages such as Python.
+
+ * machinectl will now show the UID shift of local containers, if user
+ namespacing is enabled for them.
+
+ * systemd will now optionally run "environment generator" binaries at
+ configuration load time. They may be used to add environment
+ variables to the environment block passed to services invoked. One
+ user environment generator is shipped by default that sets up
+ environment variables based on files dropped into /etc/environment.d
+ and ~/.config/environment.d/.
+
+ * systemd-resolved now includes the new, recently published 2017 DNSSEC
+ root key (KSK).
+
+ * hostnamed has been updated to report a new chassis type of
+ "convertible" to cover "foldable" laptops that can both act as a
+ tablet and as a laptop, such as various Lenovo Yoga devices.
+
+ Contributions from: Adrián López, Alexander Galanin, Alexander
+ Kochetkov, Alexandros Frantzis, Andrey Ulanov, Antoine Eiche, Baruch
+ Siach, Bastien Nocera, Benjamin Robin, Björn, Brandon Philips, Cédric
+ Schieli, Charles (Chas) Williams, Christian Hesse, Daniele Medri,
+ Daniel Drake, Daniel Rusek, Daniel Wagner, Dan Streetman, Dave Reisner,
+ David Glasser, David Herrmann, David Michael, Djalal Harouni, Dmitry
+ Khlebnikov, Dmitry Rozhkov, Dongsu Park, Douglas Christman, Earnestly,
+ Emil Soleyman, Eric Cook, Evgeny Vereshchagin, Felipe Sateler, Fionn
+ Cleary, Florian Klink, Francesco Brozzu, Franck Bui, Gabriel Rauter,
+ Gianluca Boiano, Giedrius Statkevičius, Graeme Lawes, Hans de Goede,
+ Harald Hoyer, Ian Kelling, Ivan Shapovalov, Jakub Wilk, Janne Heß, Jan
+ Synacek, Jason Reeder, Jonathan Boulle, Jörg Thalheim, Jouke Witteveen,
+ Karl Kraus, Kees Cook, Keith Busch, Kieran Colford, kilian-k, Lennart
+ Poettering, Lubomir Rintel, Lucas Werkmeister, Lukas Rusak, Maarten de
+ Vries, Maks Naumov, Mantas Mikulėnas, Marc-Andre Lureau, Marcin Bachry,
+ Mark Stosberg, Martin Ejdestig, Martin Pitt, Mauricio Faria de
+ Oliveira, micah, Michael Biebl, Michael Shields, Michal Schmidt, Michal
+ Sekletar, Michel Kraus, Mike Gilbert, Mikko Ylinen, Mirza Krak,
+ Namhyung Kim, nikolaof, peoronoob, Peter Hutterer, Peter Körner, Philip
+ Withnall, Piotr Drąg, Ray Strode, Reverend Homer, Rike-Benjamin
+ Schuppner, Robert Kreuzer, Ronny Chevalier, Ruslan Bilovol, sammynx,
+ Sergey Ptashnick, Sergiusz Urbaniak, Stefan Berger, Stefan Hajnoczi,
+ Stefan Schweter, Stuart McLaren, Susant Sahani, Sylvain Plantefève,
+ Taylor Smock, Tejun Heo, Thomas Blume, Thomas H. P. Andersen, Tibor
+ Nagy, Tobias Stoeckmann, Tom Gundersen, Torstein Husebø, Viktar
+ Vaŭčkievič, Viktor Mihajlovski, Vitaly Sulimov, Waldemar Brodkorb,
+ Walter Garcia-Fontes, Wim de With, Yassine Imounachen, Yi EungJun,
+ YunQiang Su, Yu Watanabe, Zbigniew Jędrzejewski-Szmek, Александр
+ Тихонов
+
+ — Berlin, 2017-03-01
+
CHANGES WITH 232:
+ * udev now runs with MemoryDenyWriteExecute=, RestrictRealtime= and
+ RestrictAddressFamilies= enabled. These sandboxing options should
+ generally be compatible with the various external udev call-out
+ binaries we are aware of, however there may be exceptions, in
+ particular when exotic languages for these call-outs are used. In
+ this case, consider turning off these settings locally.
+
* The new RemoveIPC= option can be used to remove IPC objects owned by
the user or group of a service when that service exits.
gudev from the Gnome project instead. gudev is still included
in systemd, for now. It will be removed soon, though. Please
also see the announcement-thread on systemd-devel:
- http://lists.freedesktop.org/archives/systemd-devel/2015-May/032070.html
+ https://lists.freedesktop.org/archives/systemd-devel/2015-May/032070.html
* systemd now exposes a CPUUsageNSec= property for each
service unit on the bus, that contains the overall consumed
like Cockpit which register web clients as PAM sessions.
* timer units with at least one OnCalendar= setting will now
- be started only after timer-sync.target has been
+ be started only after time-sync.target has been
reached. This way they will not elapse before the system
clock has been corrected by a local NTP client or
similar. This is particular useful on RTC-less embedded
also supports LUKS-encrypted partitions now. With this in
place, automatic discovery of partitions to mount following
the Discoverable Partitions Specification
- (http://www.freedesktop.org/wiki/Specifications/DiscoverablePartitionsSpec)
+ (https://www.freedesktop.org/wiki/Specifications/DiscoverablePartitionsSpec)
is now a lot more complete. This allows booting without
/etc/fstab and without root= on the kernel command line on
systems prepared appropriately.
* A new libsystemd-bus module has been added that implements a
pretty complete D-Bus client library. For details see:
- http://lists.freedesktop.org/archives/systemd-devel/2013-March/009797.html
+ https://lists.freedesktop.org/archives/systemd-devel/2013-March/009797.html
* journald will now explicitly flush the journal files to disk
at the latest 5min after each write. The file will then also
only in conjunction with Gummiboot, but could be supported
by other boot loaders too. For details see:
- http://www.freedesktop.org/wiki/Software/systemd/BootLoaderInterface
+ https://www.freedesktop.org/wiki/Software/systemd/BootLoaderInterface
* A new generator has been added that automatically mounts the
EFI System Partition (ESP) to /boot, if that directory
* A new tool kernel-install has been added that can install
kernel images according to the Boot Loader Specification:
- http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec
+ https://www.freedesktop.org/wiki/Specifications/BootLoaderSpec
* Boot time console output has been improved to provide
animated boot time output for hanging jobs.
of these policies is now the default. Please see this wiki
document for details:
- http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
+ https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* Auke Kok's bootchart implementation has been added to the
systemd tree. It is an optional component that can graph the
indexed database to link up additional information with
journal entries. For further details please check:
- http://www.freedesktop.org/wiki/Software/systemd/catalog
+ https://www.freedesktop.org/wiki/Software/systemd/catalog
The indexed message catalog database also needs to be
rebuilt after installation of message catalog files. Use
* A framework for implementing offline system updates is now
integrated, for details see:
- http://freedesktop.org/wiki/Software/systemd/SystemUpdates
+ https://www.freedesktop.org/wiki/Software/systemd/SystemUpdates
* A new service type Type=idle is available now which helps us
avoiding ugly interleaving of getty output and boot status
* New unit file option ControlGroupPersistent= to make cgroups
persistent, following the mechanisms outlined in
- http://www.freedesktop.org/wiki/Software/systemd/PaxControlGroups
+ https://www.freedesktop.org/wiki/Software/systemd/PaxControlGroups
* Support multiple local RTCs in a sane way
* Processes with '@' in argv[0][0] are now excluded from the
final shut-down killing spree, following the logic explained
in:
- http://www.freedesktop.org/wiki/Software/systemd/RootStorageDaemons
+ https://www.freedesktop.org/wiki/Software/systemd/RootStorageDaemons
* All processes remaining in a service cgroup when we enter
the START or START_PRE states are now killed with
projects / thirdparty / systemd.git / blobdiff