Internet Systems Consortium DHCP Distribution
- Version 4.3.4
- 29 March 2016
+ Version 4.4.3-P1
+ 5 October 2022
README FILE
5.2.4 BROADCAST
5.2.6 IP BOOTP AGENT
5.2.7 MULTIPLE INTERFACES
- 5.3 SCO
- 5.4 HP-UX
- 5.5 ULTRIX
- 5.6 FreeBSD
- 5.7 NeXTSTEP
- 5.8 SOLARIS
- 5.8.1 Solaris 11
- 5.8.2 Solaris 11 and ATF
- 5.8.3 Other Solaris Items
- 5.9 AIX
- 5.10 MacOS X
- 5.11 ATF
+ 5.3 ATF
6 SUPPORT
6.1 HOW TO REPORT BUGS
7 HISTORY
client lease database is documented in the dhclient.leases man page.
The source for all these man pages is in the client/ subdirectory in
the distribution. In addition, the dhcp-options man page should be
-referred to for information about DHCP options.
+referred to for information about DHCP options. The client component
+is End-of-Life and will not be part of future releases.
DHCP relay agent documentation is in the dhcrelay man page, the source
-for which is distributed in the relay/ subdirectory.
+for which is distributed in the relay/ subdirectory. The relay component
+is End-of-Life and will not be part of future releases.
+
+KEA Migration Assistant documentation, including how to build, install
+and use it, is included in the keama/ directory.
To read installed manual pages, use the man command. Type "man page"
where page is the name of the manual page. This will only work if
'make install' (so if you're reading a manpage out of the source
directory, it may not have up-to-date information).
- RELEASE STATUS
-
-This is ISC DHCP 4.3.x The major theme for this release is "ipv6 uplift",
-in which we enhance the v6 code to support many of the features found
-in the v4 code. These include: support for v6, support for on_commit,
-on_expiry and on_release in v6, support for accessing v6 relay options
-and better log messages for v6 addresses. Non v6 features include:
-support for the standard DDNS, better OMAPI class and sub-class support
-allowing for dynamic addition and removal of sub-classes, and support for
-DDNS without zone statements.
-
-In this release, the DHCPv6 server should be fully functional on Linux,
-Solaris, or any BSD. The DHCPv6 client should be similarly functional
-except on Solaris.
-
-The DHCPv4 server, relay, and client, should be fully functional
-on Linux, Solaris, any BSD, HPUX, SCO, NextSTEP, and Irix.
-
-If you are running the DHCP distribution on a machine which is a
-firewall, or if there is a firewall between your DHCP server(s) and
-DHCP clients, please read the section on firewalls which appears later
-in this document.
-
-If you wish to run the DHCP Distribution on Linux, please see the
-Linux-specific notes later in this document. If you wish to run on an
-SCO release, please see the SCO-specific notes later in this document.
-You particularly need to read these notes if you intend to support
-Windows 95 clients. If you are running HP-UX or Ultrix, please read the
-notes for those operating systems below. If you are running NeXTSTEP,
-please see the notes on NeXTSTEP below.
-
-If you start dhcpd and get a message, "no free bpf", that means you
-need to configure the Berkeley Packet Filter into your operating
-system kernel. On NetBSD, FreeBSD and BSD/os, type ``man bpf'' for
-information. On Digital Unix, type ``man pfilt''.
+ RELEASE STATUS
+Version 4.4.3-P1 is a maintenance release of the DHCP client, relay and
+server. It is the final release for the client and relay components,
+which have reached end-of-life and will no longer be maintained.
BUILDING THE DHCP DISTRIBUTION
To build the DHCP Distribution, unpack the compressed tar file using
the tar utility and the gzip command - type something like:
- gunzip dhcp-4.3.4.tar.gz
- tar xvf dhcp-4.3.4.tar
+ gunzip dhcp-4.4.3-P1.tar.gz
+ tar xvf dhcp-4.4.3-P1.tar
CONFIGURING IT
-Now, cd to the dhcp-4.3.4 subdirectory that you've just created and
+Now, cd to the dhcp-4.4.3-P1 subdirectory that you've just created and
configure the source tree by typing:
./configure
./configure --help
+If you want to use dynamic shared libraries automake, autoconf
+(aka GNU autotools) and libtool must be available. The DHCP
+distribution provides 3 configure.ac* files: the -lt version
+has no libtool support and was copied to the configure.ac
+standard file in the distribution. To enable libtool support
+you should perform these steps:
+
+ cp configure.ac+lt configure.ac
+ autoreconf -i
+
+after you can use the regenerated configure as usual
+(with libtool support (--enable-libtool) on by default):
+
+ ./configure
+
+For compatibility (and people who don't read this documentation)
+the --enable-libtool configuration file is supported even by
+the distributed configure (and off by default). The previous
+steps are performed and the regenerated configure called with
+almost the same parameters (this "almost" makes the use of
+this feature not recommended).
+
+Note you can't go back from with libtool support to without libtool
+support by restoring configure.ac and rerun autoreconf. If you
+want or need to restore the without libtool support state the
+required way is to simply restore the whole distribution.
+
DYNAMIC DNS UPDATES
A fully-featured implementation of dynamic DNS updates is included in
Linux kernel must rewrite packets received via this interface. For
more information, consult the vconfig man pages.
- SCO
-
-ISC DHCP will now work correctly on newer versions of SCO out of the
-box (tested on OpenServer 5.05b, assumed to work on UnixWare 7).
-
-Older versions of SCO have the same problem as Linux (described earlier).
-The thing is, SCO *really* doesn't want to let you add a host route to
-the all-ones broadcast address.
-
-You can try the following:
-
- ifconfig net0 xxx.xxx.xxx.xxx netmask 0xNNNNNNNN broadcast 255.255.255.255
-
-If this doesn't work, you can also try the following strange hack:
-
- ifconfig net0 alias 10.1.1.1 netmask 8.0.0.0
-
-Apparently this works because of an interaction between SCO's support
-for network classes and the weird netmask. The 10.* network is just a
-dummy that can generally be assumed to be safe. Don't ask why this
-works. Just try it. If it works for you, great.
-
- HP-UX
-
-HP-UX has the same problem with the all-ones broadcast address that
-SCO and Linux have. One user reported that adding the following to
-/etc/rc.config.d/netconf helped (you may have to modify this to suit
-your local configuration):
-
-INTERFACE_NAME[0]=lan0
-IP_ADDRESS[0]=1.1.1.1
-SUBNET_MASK[0]=255.255.255.0
-BROADCAST_ADDRESS[0]="255.255.255.255"
-LANCONFIG_ARGS[0]="ether"
-DHCP_ENABLE[0]=0
-
- ULTRIX
-
-Now that we have Ultrix packet filter support, the DHCP Distribution
-on Ultrix should be pretty trouble-free. However, one thing you do
-need to be aware of is that it now requires that the pfilt device be
-configured into your kernel and present in /dev. If you type ``man
-packetfilter'', you will get some information on how to configure your
-kernel for the packet filter (if it isn't already) and how to make an
-entry for it in /dev.
-
- FreeBSD
-
-Versions of FreeBSD prior to 2.2 have a bug in BPF support in that the
-ethernet driver swaps the ethertype field in the ethernet header
-downstream from BPF, which corrupts the output packet. If you are
-running a version of FreeBSD prior to 2.2, and you find that dhcpd
-can't communicate with its clients, you should #define BROKEN_FREEBSD_BPF
-in site.h and recompile.
-
-Modern versions of FreeBSD include the ISC DHCP 3.0 client as part of
-the base system, and the full distribution (for the DHCP server and
-relay agent) is available from the Ports Collection in
-/usr/ports/net/isc-dhcp3, or as a package on FreeBSD installation
-CDROMs.
-
- NeXTSTEP
-
-The NeXTSTEP support uses the NeXTSTEP Berkeley Packet Filter
-extension, which is not included in the base NextStep system. You
-must install this extension in order to get dhcpd or dhclient to work.
-
- SOLARIS
-
-There are two known issues seen when compiling using the Sun compiler.
-
-The first is that older Sun compilers generate an error on some of
-our uses of the flexible array option. Newer versions only generate
-a warning, which can be safely ignored. If you run into this error
-("type of struct member "buf" can not be derived from structure with
-flexible array member"), upgrade your tools to Oracle Solaris Studio
-(previously Sun Studio) 12 or something newer.
-
-The second is the interaction between the configure script and the
-makefiles for the Bind libraries. Currently we don't pass all
-environment variables between the DHCP configure and the Bind configure.
-
-If you attempt to specify the compiler you wish to use like this:
-
- CC=/opt/SUNWspro/bin/cc ./configure
-
-"make" may not build the Bind libraries with that compiler.
-
-In order to use the same compiler for Bind and DHCP we suggest the
-following commands:
-
- CC=/opt/SUNWspro/bin/cc ./configure
- CC=/opt/SUNWspro/bin/cc make
-
- Solaris 11
-
-We have integrated a patch from Oracle to use sockets instead of
-DLPI on Solaris 11. This functionality was written for use with
-Solaris Studio 12.2 and requires the system/header package.
-
-By default this code is disabled in order to minimize disruptions
-for current users. In order to enable this code you will need to
-enable both USE_SOCKETS and USE_V4_PKTINFO as part of the
-configuration step. The command line would be something like:
-
- ./configure --enable-use-sockets --enable-ipv4-pktinfo
-
- Solaris 11 and ATF
-
-We have reports that ATF 0.15 and 0.16 do not build on Solaris 11. The
-following changes to the ATF source code appear to fix this issue:
-
-diff -ru atf-0.15/atf-c/tp_test.c atf-0.15-patched/atf-c/tp_test.c
---- atf-0.15/atf-c/tp_test.c 2011-12-06 06:31:11.000000000 +0100
-+++ atf-0.15-patched/atf-c/tp_test.c 2012-06-19 15:54:57.000000000 +0200
-@@ -28,6 +28,7 @@
-*/
-
-#include <string.h>
-+#include <stdio.h>
-#include <unistd.h>
-
-#include <atf-c.h>
-
-diff -ru atf-0.15/atf-run/requirements.cpp atf-0.15-patched/atf-run/requirements.cpp
---- atf-0.15/atf-run/requirements.cpp 2012-01-13 20:44:25.000000000 +0100
-+++ atf-0.15-patched/atf-run/requirements.cpp 2012-06-19 15:41:51.000000000 +0200
-@@ -29,7 +29,7 @@
-
-extern "C" {
-#include <sys/param.h>
--#include <sys/sysctl.h>
-+//#include <sys/sysctl.h>
-}
-
-#include <cerrno>
-
- Other Solaris Items
-
-One problem which has been observed and is not fixed in this
-patchlevel has to do with using DLPI on Solaris machines. The symptom
-of this problem is that the DHCP server never receives any requests.
-This has been observed with Solaris 2.6 and Solaris 7 on Intel x86
-systems, although it may occur with other systems as well. If you
-encounter this symptom, and you are running the DHCP server on a
-machine with a single broadcast network interface, you may wish to
-edit the includes/site.h file and uncomment the #define USE_SOCKETS
-line. Then type ``make clean; make''. As an alternative workaround,
-it has been reported that running 'snoop' will cause the dhcp server
-to start receiving packets. So the practice reported to us is to run
-snoop at dhcpd startup time, with arguments to cause it to receive one
-packet and exit.
-
- snoop -c 1 udp port 67 > /dev/null &
-
-The DHCP client on Solaris will only work with DLPI. If you run it
-and it just keeps saying it's sending DHCPREQUEST packets, but never
-gets a response, you may be having DLPI trouble as described above.
-If so, we have no solution to offer at this time, aside from the above
-workaround which should also work here. Also, because Solaris requires
-you to "plumb" an interface before it can be detected by the DHCP client,
-you must either specify the name(s) of the interface(s) you want to
-configure on the command line, or must plumb the interfaces prior to
-invoking the DHCP client. This can be done with ``ifconfig iface plumb'',
-where iface is the name of the interface (e.g., ``ifconfig hme0 plumb'').
-
-It should be noted that Solaris versions from 2.6 onward include a
-DHCP client that you can run with ``/sbin/ifconfig iface dhcp start''
-rather than using the ISC DHCP client, including DHCPv6. Consequently,
-we don't believe there is a need for the client to run on Solaris, and
-have not engineered the needed DHCPv6 modifications for the dhclient-script.
-If you feel this is in error, or have a need, please contact us.
-
- AIX
-
-The AIX support uses the BSD socket API, which cannot differentiate on
-which network interface a broadcast packet was received; thus the DHCP
-server and relay will work only on a single interface. (They do work
-on multi-interface machines if configured to listen on only one of the
-interfaces.)
-
-We have reports of Windows XP clients having difficulty retrieving
-addresses from a server running on an AIX machine. This issue
-was traced to the client requiring messages be sent to the all ones
-broadcast address (255.255.255.255) while the AIX server was sending
-to 192.168.0.255.
-
-You may be able to solve this by including a relay between the client
-and server with the relay configured to use a broadcast of all-ones.
-
-A second option that worked for AIX 5.1 but doesn't seem to work for
-AIX 5.3 was to:
- create a host file entry for all-ones (255.255.255.255)
-and then add a route:
- route add -host all-ones -interface <local-ip-address>
-
-The ISC DHCP distribution does not include a dhclient-script for AIX--
-AIX comes with a DHCP client. Contribution of a working dhclient-script
-for AIX would be welcome.
-
-
- MacOS X
-
-The MacOS X system uses a TCP/IP stack derived from FreeBSD with a
-user-friendly interface named the System Configuration Framework.
-As it includes a builtin DHCPv4 client (you are better just using that),
-this text is only about the DHCPv6 client (``dhclient -6 ...''). The DNS
-configuration (domain search list and name servers' addresses) is managed
-by a System Configuration agent, not by /etc/resolv.conf (which is a link
-to /var/run/resolv.conf, which itself only reflects the internal state;
-the System Configuration framework's Dynamic Store).
-
-This means that modifying resolv.conf directly doesn't have the
-intended effect, instead the macos script sample creates its own
-resolv.conf.dhclient6 in /var/run, and inserts the contents of this
-file into the Dynamic Store.
-
-When updating the address configuration the System Configuration
-framework expects the prefix and a default router along with the
-configured address. As this extra information is not available via
-the DHCPv6 protocol the System Configuration framework isn't usable
-for address configuration, instead ifconfig is used directly.
-
-Note the Dynamic Store (from which /var/run/resolv.conf is built) is
-recomputed from scratch when the current location/set is changed.
-Running the dhclient-script reinstalls the resolv.conf.dhclient6
-configuration.
-
ATF
Please see the file DHCP/doc/devel/atf.dox for a description of building
-and using these tools.
+and using these tools.
The optional unit tests use ATF (Automated Testing Framework) including
the atf-run and atf-report tools. ATF deprecated these tools in
ISC DHCP, more information about ISC Support Contracts can be found at
the following URL:
- https://www.isc.org/services/support/
+ https://www.isc.org/support/
Please understand that we may not respond to support inquiries unless
you have a support contract. ISC will continue its practice of always
WHERE TO SEND FEATURE REQUESTS: We like to hear your feedback. We may
not respond to it all the time, but we do read it. If ISC DHCP doesn't
work well for you, or you have an idea that would improve it for your
-use, please send your suggestion to dhcp-suggest@isc.org. This is also
-an excellent place to send patches that add new features.
+use, please create an issue at https://gitlab.isc.org/isc-projects/dhcp/issues.
+This is also an excellent place to send patches that add new features.
WHERE TO REPORT BUGS: If you want the act of sending in a bug report
to result in you getting help in the form of a fixed piece of
but fundamentally you are making a support request, so please use the
addresses described in the previous paragraphs. If you are _sure_ that
your problem is a bug, and not user error, or if your bug report
-includes a patch, you can send it to our ticketing system at
-dhcp-bugs@isc.org. If you have not received a notice that the ticket
-has been resolved, then we're still working on it.
+includes a patch, you can submit it to our ticketing system at
+https://gitlab.isc.org/isc-projects/dhcp/issues. If you have not received
+a notice that the ticket has been resolved, then we're still working on it.
+Notice that this is the final release that features client and relay
+components. Reporting bugs in them makes limited sense. The ISC team
+will not be fixing any issues related to client or relay. They may be
+useful for other users to document some problems or perhaps discuss
+and share workarounds.
PLEASE DO NOT REPORT BUGS IN OLD SOFTWARE RELEASES! Fetch the latest
release and see if the bug is still in that version of the software,
-and if it is still present, _then_ report it. ISC release versions
-always have three numbers, for example: 1.2.3. The 'major release' is
-1 here, the 'minor release' is 2, and the 'maintenance release' is 3.
-ISC will accept bug reports against the most recent two major.minor
-releases: for example, 1.0.0 and 0.9.0, but not 0.8.* or prior.
+and if it is still present, _then_ report it. ISC release versions
+always have three numbers, for example: 1.2.3. The 'major release' is
+1 here, the 'minor release' is 2, and the 'maintenance release' is 3.
PLEASE take a moment to determine where the ISC DHCP distribution
that you're using came from. ISC DHCP is sometimes heavily modified
This assumes that it's the dhcp server you're debugging, and
that the core file is in dhcpd.core.
-Please see https://www.isc.org/software/dhcp/ for details on how to subscribe
+Please see https://www.isc.org/dhcp/ for details on how to subscribe
to the ISC DHCP mailing lists.
HISTORY
support, OMAPI, Dynamic DNS, conditional behaviour, client classing,
and more. Version 3 of the DHCP server was funded by Nominum, Inc.
The 4.0 release in December 2007 introduced DHCPv6 protocol support
-for the server and client.
+for the server and client. The client and relay components reached
+their End-of-Life in January 2022.
This product includes cryptographic software written
by Eric Young (eay@cryptsoft.com).
projects / thirdparty / dhcp.git / blobdiff