SPI Flash: Add "sf" command

[people/ms/u-boot.git] / README

diff --git a/README b/README
index 3a10bd762b5d6af892eecec09eae2276aabae97c..78344f8b57a7e7a4d3c78361bec4f57310c50541 100644 (file)
--- a/README
+++ b/README
@@ -623,7 +623,6 @@ The following options need to be configured:
                CONFIG_CMD_SPI          * SPI serial bus support
                CONFIG_CMD_USB          * USB support
                CONFIG_CMD_VFD          * VFD support (TRAB)
-               CONFIG_CMD_BSP          * Board SPecific functions
                CONFIG_CMD_CDP          * Cisco Discover Protocol support
                CONFIG_CMD_FSL          * Microblaze FSL support
 
@@ -672,6 +671,7 @@ The following options need to be configured:
 
                CONFIG_RTC_MPC8xx       - use internal RTC of MPC8xx
                CONFIG_RTC_PCF8563      - use Philips PCF8563 RTC
+               CONFIG_RTC_MC13783      - use MC13783 RTC
                CONFIG_RTC_MC146818     - use MC146818 RTC
                CONFIG_RTC_DS1307       - use Maxim, Inc. DS1307 RTC
                CONFIG_RTC_DS1337       - use Maxim, Inc. DS1337 RTC
@@ -961,6 +961,10 @@ The following options need to be configured:
                display); also select one of the supported displays
                by defining one of these:
 
+               CONFIG_ATMEL_LCD:
+
+                       HITACHI TX09D70VM1CCA, 3.5", 240x320.
+
                CONFIG_NEC_NL6448AC33:
 
                        NEC NL6448AC33-18. Active, color, single scan.
@@ -1414,6 +1418,11 @@ The following options need to be configured:
                Currently supported on some MPC8xxx processors.  For an
                example, see include/configs/mpc8349emds.h.
 
+               CONFIG_MXC_SPI
+
+               Enables the driver for the SPI controllers on i.MX and MXC
+               SoCs. Currently only i.MX31 is supported.
+
 - FPGA Support: CONFIG_FPGA
 
                Enables FPGA subsystem.
@@ -1555,6 +1564,10 @@ The following options need to be configured:
                before giving up the operation. If not defined, a
                default value of 5 is used.
 
+               CONFIG_ARP_TIMEOUT
+
+               Timeout waiting for an ARP reply in milliseconds.
+
 - Command Interpreter:
                CONFIG_AUTO_COMPLETE